Since iwl_fw_error_collect() is now always called with the sync
argument set to true, to collect data synchronously, remove the
argument from it entirely.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.08f515513e88.I780a557743ca7f029f46a1cc75d0799542e39d83@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to later add the ability to do deeper resets of the
device when it crashes, first restructure the firmware error
handling. Instead of having just a single nic_error() method
that handles all, split it:
- nic_error() just handles and prints the error itself,
- dump_error() synchronously creates an error dump, and
- sw_reset() will be called to request doing a SW reset.
This changes the architecture so that the transport is now
responsible for deciding how to do the reset, and therefore
the handling of reprobe if error occurs during reconfig
moves there, which necessitates adding a method there that
notifies the transport that the recovery was completed.
Actually introducing the model under which deeper resets can
be done will be in future patches.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.6d4f741ae907.I96a9243e7877808ed6d1bff6967c15d6c24882f0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When some channel context manipulations fail, the device
is going to be restarted to try to recover. Make this go
through a real FW restart via an NMI so the transport is
aware of it and can later handle escalation, and to make
it easier to restructure the code later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.96b732029d20.I2e729f402db58a76cea620b6f62a02da49a10b48@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Except for some special handling in DVM, error dump and some
message behaviour, cmd_queue_full and nic_error are equivalent
now. Unify by giving a special error type, so DVM can continue
to differentiate.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.0222183504aa.Ie29cef75fbd91b64a43619bc36bd5b29c5b9f957@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Approximately three years ago, in commit ddb6b76b6f
("iwlwifi: yoyo: support TLV-based firmware reset"), the code
was (likely erroneously) changed to no longer treat error
interrupts as firmware errors. As a result, this meant that
the fw_restart counter was only applied in case of command
queue being stuck, which never seems to happen. Also, there's
no longer any way to set the mvm->fw_restart to a value that
doesn't match exactly the module parameter behaviour.
Instead of trying to fix this, simply remove the logic that
limits the number of restarts, it's clearly unused.
However, restore the logic that restart isn't unconditional,
by checking the module parameter.
Since the "fw_error" argument to iwl_mvm_nic_restart() is now
always true (except in the "never happens" case of CMD queue
stuck), just remove it too and treat command queue stuck the
same way as everything else.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.b0489daf323c.I0cd3233b2214c5f06e059f746041b19d08647e40@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Now that the retry loop only happens when timeouts occur
and firmware errors are different, we no longer need the
STARTING state with all the infrastructure for it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.c55d73436521.I08e9f6a71d56f86872bca4d4e3048faa113a7120@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We had reverted the retry loop removal because of an issue
with PNVM loading, but that issue manifests as timeouts.
Since the retries aren't needed in other cases, only do
them when there were timeouts while starting, not other
errors.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.98201c79f66d.I5d7e12b219d533c6a77741ec5863984d35711f48@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We had reverted the retry loop removal because of an issue
with PNVM loading, but that issue manifests as timeouts.
Since the retry loops aren't needed in other cases, only
do them when there were timeouts while loading, not other
errors.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.a21bf40b0fd3.I70166e460906d6d183359889d7543b9c587b7182@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to restrict the retry loops for timeouts, first
pass the error code up using ERR_PTR(). This of course
requires all existing functions to be updated accordingly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.3fe5031d5784.I7307996c91dac69619ff9c616b8a077423fac19f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
These comments have kernel-doc markup and were meant to
be handled as such, add the right /** marker to them.
Add missing entries where needed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.c5c04b641479.I702b8122d307a0d9d09df038cda10be063f7f2d7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For certain platforms, it may necessary to use the STEP in URM
(ultra reliable mode.) Read the necessary flags from the BIOS
(ACPI or UEFI) and indicate the chosen mode to the firmware in
the context info. Whether or not URM really was configured is
already read back later, to adjust capabilities accordingly.
Signed-off-by: Somashekhar(Som) <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.b30024905de3.If3c578af2c15f8005bbe71499bc4091348ed7bb0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This variable exists for the "common" (WiFi/BT) GUID, not the
WiFi-only GUID. Fix that by passing the GUID to the function.
A short-cut for the wifi-only version remains so not all code
must be updated.
However, rename the GUID defines to be clearer.
Fixes: 09b4c35d73 ("wifi: iwlwifi: mvm: Support STEP equalizer settings from BIOS.")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.89a5ad921b6d.Idae95a70ff69d2ba1b610e8eced826961ce7de98@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[BUG]
When running btrfs with block size (4K) smaller than page size (64K,
aarch64), there is a very high chance to crash the kernel at
generic/750, with the following messages:
(before the call traces, there are 3 extra debug messages added)
BTRFS warning (device dm-3): read-write for sector size 4096 with page size 65536 is experimental
BTRFS info (device dm-3): checking UUID tree
hrtimer: interrupt took 5451385 ns
BTRFS error (device dm-3): cow_file_range failed, root=4957 inode=257 start=1605632 len=69632: -28
BTRFS error (device dm-3): run_delalloc_nocow failed, root=4957 inode=257 start=1605632 len=69632: -28
BTRFS error (device dm-3): failed to run delalloc range, root=4957 ino=257 folio=1572864 submit_bitmap=8-15 start=1605632 len=69632: -28
------------[ cut here ]------------
WARNING: CPU: 2 PID: 3020984 at ordered-data.c:360 can_finish_ordered_extent+0x370/0x3b8 [btrfs]
CPU: 2 UID: 0 PID: 3020984 Comm: kworker/u24:1 Tainted: G OE 6.13.0-rc1-custom+ #89
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs]
pc : can_finish_ordered_extent+0x370/0x3b8 [btrfs]
lr : can_finish_ordered_extent+0x1ec/0x3b8 [btrfs]
Call trace:
can_finish_ordered_extent+0x370/0x3b8 [btrfs] (P)
can_finish_ordered_extent+0x1ec/0x3b8 [btrfs] (L)
btrfs_mark_ordered_io_finished+0x130/0x2b8 [btrfs]
extent_writepage+0x10c/0x3b8 [btrfs]
extent_write_cache_pages+0x21c/0x4e8 [btrfs]
btrfs_writepages+0x94/0x160 [btrfs]
do_writepages+0x74/0x190
filemap_fdatawrite_wbc+0x74/0xa0
start_delalloc_inodes+0x17c/0x3b0 [btrfs]
btrfs_start_delalloc_roots+0x17c/0x288 [btrfs]
shrink_delalloc+0x11c/0x280 [btrfs]
flush_space+0x288/0x328 [btrfs]
btrfs_async_reclaim_data_space+0x180/0x228 [btrfs]
process_one_work+0x228/0x680
worker_thread+0x1bc/0x360
kthread+0x100/0x118
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1605632 OE len=16384 to_dec=16384 left=0
BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1622016 OE len=12288 to_dec=12288 left=0
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1634304 OE len=8192 to_dec=4096 left=0
CPU: 1 UID: 0 PID: 3286940 Comm: kworker/u24:3 Tainted: G W OE 6.13.0-rc1-custom+ #89
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: btrfs_work_helper [btrfs] (btrfs-endio-write)
pstate: 404000c5 (nZcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : process_one_work+0x110/0x680
lr : worker_thread+0x1bc/0x360
Call trace:
process_one_work+0x110/0x680 (P)
worker_thread+0x1bc/0x360 (L)
worker_thread+0x1bc/0x360
kthread+0x100/0x118
ret_from_fork+0x10/0x20
Code: f84086a1 f9000fe1 53041c21 b9003361 (f9400661)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception
SMP: stopping secondary CPUs
SMP: failed to stop secondary CPUs 2-3
Dumping ftrace buffer:
(ftrace buffer empty)
Kernel Offset: 0x275bb9540000 from 0xffff800080000000
PHYS_OFFSET: 0xffff8fbba0000000
CPU features: 0x100,00000070,00801250,8201720b
[CAUSE]
The above warning is triggered immediately after the delalloc range
failure, this happens in the following sequence:
- Range [1568K, 1636K) is dirty
1536K 1568K 1600K 1636K 1664K
| |/////////|////////| |
Where 1536K, 1600K and 1664K are page boundaries (64K page size)
- Enter extent_writepage() for page 1536K
- Enter run_delalloc_nocow() with locked page 1536K and range
[1568K, 1636K)
This is due to the inode having preallocated extents.
- Enter cow_file_range() with locked page 1536K and range
[1568K, 1636K)
- btrfs_reserve_extent() only reserved two extents
The main loop of cow_file_range() only reserved two data extents,
Now we have:
1536K 1568K 1600K 1636K 1664K
| |<-->|<--->|/|///////| |
1584K 1596K
Range [1568K, 1596K) has an ordered extent reserved.
- btrfs_reserve_extent() failed inside cow_file_range() for file offset
1596K
This is already a bug in our space reservation code, but for now let's
focus on the error handling path.
Now cow_file_range() returned -ENOSPC.
- btrfs_run_delalloc_range() do error cleanup <<< ROOT CAUSE
Call btrfs_cleanup_ordered_extents() with locked folio 1536K and range
[1568K, 1636K)
Function btrfs_cleanup_ordered_extents() normally needs to skip the
ranges inside the folio, as it will normally be cleaned up by
extent_writepage().
Such split error handling is already problematic in the first place.
What's worse is the folio range skipping itself, which is not taking
subpage cases into consideration at all, it will only skip the range
if the page start >= the range start.
In our case, the page start < the range start, since for subpage cases
we can have delalloc ranges inside the folio but not covering the
folio.
So it doesn't skip the page range at all.
This means all the ordered extents, both [1568K, 1584K) and
[1584K, 1596K) will be marked as IOERR.
And these two ordered extents have no more pending ios, they are marked
finished, and *QUEUED* to be deleted from the io tree.
- extent_writepage() do error cleanup
Call btrfs_mark_ordered_io_finished() for the range [1536K, 1600K).
Although ranges [1568K, 1584K) and [1584K, 1596K) are finished, the
deletion from io tree is async, it may or may not happen at this
time.
If the ranges have not yet been removed, we will do double cleaning on
those ranges, triggering the above ordered extent warnings.
In theory there are other bugs, like the cleanup in extent_writepage()
can cause double accounting on ranges that are submitted asynchronously
(compression for example).
But that's much harder to trigger because normally we do not mix regular
and compression delalloc ranges.
[FIX]
The folio range split is already buggy and not subpage compatible, it
was introduced a long time ago where subpage support was not even considered.
So instead of splitting the ordered extents cleanup into the folio range
and out of folio range, do all the cleanup inside writepage_delalloc().
- Pass @NULL as locked_folio for btrfs_cleanup_ordered_extents() in
btrfs_run_delalloc_range()
- Skip the btrfs_cleanup_ordered_extents() if writepage_delalloc()
failed
So all ordered extents are only cleaned up by
btrfs_run_delalloc_range().
- Handle the ranges that already have ordered extents allocated
If part of the folio already has ordered extent allocated, and
btrfs_run_delalloc_range() failed, we also need to cleanup that range.
Now we have a concentrated error handling for ordered extents during
btrfs_run_delalloc_range().
Fixes: d1051d6ebf ("btrfs: Fix error handling in btrfs_cleanup_ordered_extents")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Current ASoC is using dai_link->dai_fmt to set DAI format for both
CPU/Codec. But because it is using same settings, and
SND_SOC_DAIFMT_CLOCK_PROVIDER is flipped for CPU, we can't set both
CPU/Codec as clock consumer, for example.
To solve this issue, this patch uses extra format for each DAI which can
keep compatibility with legacy system,
1. SND_SOC_DAIFMT_FORMAT_MASK
2. SND_SOC_DAIFMT_CLOCK
3. SND_SOC_DAIFMT_INV
4. SND_SOC_DAIFMT_CLOCK_PROVIDER
Legacy
dai_fmt includes 1, 2, 3, 4
New idea
dai_fmt includes 1, 2, 3
ext_fmt includes 4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Stephen Gordon <gordoste@iinet.net.au>
Link: https://patch.msgid.link/87pll0o5j6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC is using dai_link->dai_fmt to set DAI format for both
CPU/Codec. But because it is using same settings, and
SND_SOC_DAIFMT_CLOCK_PROVIDER is flipped for CPU, we can't set both
CPU/Codec as clock consumer, for example.
To solve this issue, this patch enable to use extra format for each
DAI which can keep compatibility with legacy system,
1. SND_SOC_DAIFMT_FORMAT_MASK
2. SND_SOC_DAIFMT_CLOCK
3. SND_SOC_DAIFMT_INV
4. SND_SOC_DAIFMT_CLOCK_PROVIDER
Legacy
dai_fmt includes 1, 2, 3, 4
New idea
dai_fmt includes 1, 2, 3
ext_fmt includes 4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Stephen Gordon <gordoste@iinet.net.au>
Link: https://patch.msgid.link/87r05go5ja.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio Graph Card2 is assuming "port" are necessarily in order, but there
is no guarantee in case of overlay. Use of_graph_get_port_by_id() instead
to handle it correctly.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Stephen Gordon <gordoste@iinet.net.au>
Link: https://patch.msgid.link/87sepwo5jf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_daifmt_parse_clock_provider_raw() might be called with NULL np.
Return 0 in such case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Stephen Gordon <gordoste@iinet.net.au>
Link: https://patch.msgid.link/87ttaco5jm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
simple-card handles many type of device_node, thus need to
use of_node_put() in many place. Let's use __free(device_node)
and avoid it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Stephen Gordon <gordoste@iinet.net.au>
Link: https://patch.msgid.link/87v7uso5js.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph-card handles many type of device_node, thus need to
use of_node_put() in many place. Let's use __free(device_node)
and avoid it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Stephen Gordon <gordoste@iinet.net.au>
Link: https://patch.msgid.link/87wmf8o5k1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph-card2 handles many type of device_node, thus need to
use of_node_put() in many place. Let's use __free(device_node)
and avoid it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Stephen Gordon <gordoste@iinet.net.au>
Link: https://patch.msgid.link/87y0zoo5kc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no audio output if Speaker volume is set above 25.
According to datasheet Rev 2.5 maximum allowed value for the
Speaker output is 0b11001 (25)
0x6D CLASSD_GAIN_1/ 0x6E CLASSD_GAIN_2:
Left/Right Channel Class-D Driver Gain For DAC Left/Right
Input
(Step size is 1dB.)
00000 = Mute (DEFAULT)
00001 = 0dB
00002 = 1dB
...
11000 = 23dB
11001 = 24dB
So adjust this value in accordance with the datasheet.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://patch.msgid.link/20241219042227.7075-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
The source static analysis tool gave the following advice:
./fs/xfs/libxfs/xfs_dir2.c:382:15-22: WARNING opportunity for kmemdup
→ 382 args->value = kmalloc(len,
383 GFP_KERNEL | __GFP_NOLOCKDEP | __GFP_RETRY_MAYFAIL);
384 if (!args->value)
385 return -ENOMEM;
386
→ 387 memcpy(args->value, name, len);
388 args->valuelen = len;
389 return -EEXIST;
Replacing kmalloc() + memcpy() with kmemdump() doesn't change semantics.
Original code works without fault, so this is not a bug fix but proposed improvement.
Link: https://lwn.net/Articles/198928/
Fixes: 94a69db236 ("xfs: use __GFP_NOLOCKDEP instead of GFP_NOFS")
Fixes: 384f3ced07 ("[XFS] Return case-insensitive match for dentry cache")
Fixes: 2451337dd0 ("xfs: global error sign conversion")
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Chandan Babu R <chandanbabu@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: linux-xfs@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
They will eventually be needed to be const for zoned growfs, but even
now having such simpler helpers as const as possible is a good thing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Split out helpers for data, rt data and inode related information, and
assigning f_bavail once instead of in three places.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The only non-constant value read under m_sb_lock in xfs_fs_statfs is
sb_dblocks, and it could become stale right after dropping the lock
anyway. Remove the thus pointless lock section.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
pagb_lock has been replaced with eb_lock.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The b_error check right after xfs_trans_get_buf() is redundant:
1) If the buffer is found in transaction via xfs_trans_buf_item_match(),
any corrupted metadata error would have already been exposed during
previous reads like xfs_da3_node_read().
2) If the buffer is obtained via xfs_buf_get_map():
- It's called without XBF_READ flag, so won't return buffer with
b_error set, since xfs_buf_get_map() will clear it anyway.
- Buffer found in cache normally won't have error since previous reads
had checked it, unless someone corrupts the buffer and the AIL
pushes it out to disk while the buffer's unlocked. But in this case,
AIL will shut down the log.
Remove this redundant check to simplify the code, make the code consistent
with most other xfs_trans_get_buf() callers in XFS.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The current reservation of the log ticket has already been updated a few
lines above in xfs_log_ticket_regrant(), so there is no need to update it
again. This is just a code cleanup with no functional changes.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Use already initialized local variables 'offset' and 'size' instead
of accessing ioend members directly in xfs_setfilesize() call.
This is just a code cleanup with no functional changes.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
When mounting an image containing a log with sb modifications that require
log replay, the mount process hang all the time and stack as follows:
[root@localhost ~]# cat /proc/557/stack
[<0>] xfs_buftarg_wait+0x31/0x70
[<0>] xfs_buftarg_drain+0x54/0x350
[<0>] xfs_mountfs+0x66e/0xe80
[<0>] xfs_fs_fill_super+0x7f1/0xec0
[<0>] get_tree_bdev_flags+0x186/0x280
[<0>] get_tree_bdev+0x18/0x30
[<0>] xfs_fs_get_tree+0x1d/0x30
[<0>] vfs_get_tree+0x2d/0x110
[<0>] path_mount+0xb59/0xfc0
[<0>] do_mount+0x92/0xc0
[<0>] __x64_sys_mount+0xc2/0x160
[<0>] x64_sys_call+0x2de4/0x45c0
[<0>] do_syscall_64+0xa7/0x240
[<0>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
During log recovery, while updating the in-memory superblock from the
primary SB buffer, if an error is encountered, such as superblock
corruption occurs or some other reasons, we will proceed to out_release
and release the xfs_buf. However, this is insufficient because the
xfs_buf's log item has already been initialized and the xfs_buf is held
by the buffer log item as follows, the xfs_buf will not be released,
causing the mount thread to hang.
xlog_recover_do_primary_sb_buffer
xlog_recover_do_reg_buffer
xlog_recover_validate_buf_type
xfs_buf_item_init(bp, mp)
The solution is straightforward, we simply need to allow it to be
handled by the normal buffer write process. The filesystem will be
shutdown before the submission of buffer_list in xlog_do_recovery_pass(),
ensuring the correct release of the xfs_buf as follows:
xlog_do_recovery_pass
error = xlog_recover_process
xlog_recover_process_data
xlog_recover_process_ophdr
xlog_recovery_process_trans
...
xlog_recover_buf_commit_pass2
error = xlog_recover_do_primary_sb_buffer
//Encounter error and return
if (error)
goto out_writebuf
...
out_writebuf:
xfs_buf_delwri_queue(bp, buffer_list) //add bp to list
return error
...
if (!list_empty(&buffer_list))
if (error)
xlog_force_shutdown(log, SHUTDOWN_LOG_IO_ERROR); //shutdown first
xfs_buf_delwri_submit(&buffer_list); //submit buffers in list
__xfs_buf_submit
if (bp->b_mount->m_log && xlog_is_shutdown(bp->b_mount->m_log))
xfs_buf_ioend_fail(bp) //release bp correctly
Fixes: 6a18765b54 ("xfs: update the file system geometry after recoverying superblock buffers")
Cc: stable@vger.kernel.org # v6.12
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The t_magic field is only ever assigned to, but never read. Remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
XFS_ILOG_NONCORE is not used in the kernel code or xfsprogs, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
And return bool instead of a boolean condition as int.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
This patchset enables use of the file data block sharing feature (i.e.
reflink) on the realtime device. It follows the same basic sequence as
the realtime rmap series -- first a few cleanups; then introduction of
the new btree format and inode fork format. Next comes enabling CoW and
remapping for the rt device; new scrub, repair, and health reporting
code; and at the end we implement some code to lengthen write requests
so that rt extents are always CoWed fully.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZ2nQ6gAKCRBKO3ySh0YR
phxFAQDsng0DbICm7bQPkjOxCG8SGMv0DRIABYe7kmk4NJuZkQEA/mHiDSA6CLg+
bmqS9dfMRMSG/hl+9+Vp3e3CsZgMxQ4=
=dWPC
-----END PGP SIGNATURE-----
Merge tag 'realtime-reflink_2024-12-23' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into for-next
xfs: reflink on the realtime device [v6.2 05/14]
This patchset enables use of the file data block sharing feature (i.e.
reflink) on the realtime device. It follows the same basic sequence as
the realtime rmap series -- first a few cleanups; then introduction of
the new btree format and inode fork format. Next comes enabling CoW and
remapping for the rt device; new scrub, repair, and health reporting
code; and at the end we implement some code to lengthen write requests
so that rt extents are always CoWed fully.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
This is the latest revision of a patchset that adds to XFS kernel
support for reverse mapping for the realtime device. This time around
I've fixed some of the bitrot that I've noticed over the past few
months, and most notably have converted rtrmapbt to use the metadata
inode directory feature instead of burning more space in the superblock.
At the beginning of the set are patches to implement storing B+tree
leaves in an inode root, since the realtime rmapbt is rooted in an
inode, unlike the regular rmapbt which is rooted in an AG block.
Prior to this, the only btree that could be rooted in the inode fork
was the block mapping btree; if all the extent records fit in the
inode, format would be switched from 'btree' to 'extents'.
The next few patches enhance the reverse mapping routines to handle
the parts that are specific to rtgroups -- adding the new btree type,
adding a new log intent item type, and wiring up the metadata directory
tree entries.
Finally, implement GETFSMAP with the rtrmapbt and scrub functionality
for the rtrmapbt and rtbitmap and online fsck functionality.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZ2nQ6gAKCRBKO3ySh0YR
puNFAP4j44Z3j+WEMSONKXLgl3Goo7Xahm/teGTzSN42l7lUtQEA5zhKcvDgiNIe
KXxtJcRmHCqq8qaxqcnM6vlcHok92wM=
=XjiL
-----END PGP SIGNATURE-----
Merge tag 'realtime-rmap_2024-12-23' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into for-next
xfs: realtime reverse-mapping support [v6.2 04/14]
This is the latest revision of a patchset that adds to XFS kernel
support for reverse mapping for the realtime device. This time around
I've fixed some of the bitrot that I've noticed over the past few
months, and most notably have converted rtrmapbt to use the metadata
inode directory feature instead of burning more space in the superblock.
At the beginning of the set are patches to implement storing B+tree
leaves in an inode root, since the realtime rmapbt is rooted in an
inode, unlike the regular rmapbt which is rooted in an AG block.
Prior to this, the only btree that could be rooted in the inode fork
was the block mapping btree; if all the extent records fit in the
inode, format would be switched from 'btree' to 'extents'.
The next few patches enhance the reverse mapping routines to handle
the parts that are specific to rtgroups -- adding the new btree type,
adding a new log intent item type, and wiring up the metadata directory
tree entries.
Finally, implement GETFSMAP with the rtrmapbt and scrub functionality
for the rtrmapbt and rtbitmap and online fsck functionality.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
In preparation for adding reverse mapping and refcounting to the
realtime device, enhance the metadir code to reserve free space for
btree shape changes as delayed allocation blocks.
This enables us to pre-allocate space for the rmap and refcount btrees
in the same manner as we do for the data device counterparts, which is
how we avoid ENOSPC failures when space is low but we've already
committed to a COW operation.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZ2nQ6gAKCRBKO3ySh0YR
pluAAP9u4A74HNTi7Df4C70diZIpXynSnyzAxVirQzda/WlUzAD+OjZEo7VkLgG4
AJIqspcX632tFBFhBAhf3XzqWlM+zws=
=hOw3
-----END PGP SIGNATURE-----
Merge tag 'reserve-rt-metadata-space_2024-12-23' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into for-next
xfs: enable in-core block reservation for rt metadata [v6.2 03/14]
In preparation for adding reverse mapping and refcounting to the
realtime device, enhance the metadir code to reserve free space for
btree shape changes as delayed allocation blocks.
This enables us to pre-allocate space for the rmap and refcount btrees
in the same manner as we do for the data device counterparts, which is
how we avoid ENOSPC failures when space is low but we've already
committed to a COW operation.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Amend the btree code to support storing btree rcords in the inode root,
because the current bmbt code does not support this.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZ2nQ6QAKCRBKO3ySh0YR
piSBAP0dmPfWwKtdIx1AQUmfQ4FeNQbSk5PTKLuXIjyfUug9QwEAu7L616xtrgt6
6/9CBlIUNp3gJriZzLbCjS72F7hssgQ=
=Jk+2
-----END PGP SIGNATURE-----
Merge tag 'btree-ifork-records_2024-12-23' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into for-next
xfs: refactor btrees to support records in inode root [v6.2 02/14]
Amend the btree code to support storing btree rcords in the inode root,
because the current bmbt code does not support this.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Bug fixes for 6.13.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZ2nQ6QAKCRBKO3ySh0YR
pjVrAQD9ty5VSpobCR0HRKImR1zCvjreaTzDty+XXnCrYVka1AEA1NbC53RxAPoy
bW5GJ0ZEvQhamkx9YuBfiJXoqYw1jgI=
=ZmFb
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.13-fixes_2024-12-23' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into for-next
xfs: bug fixes for 6.13 [01/14]
Bug fixes for 6.13.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Rename the macro so it's obvious what it means.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Same pattern in both functions, we really only use index, start_index is
redundant.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are only 2 WAIT_* values left for wait parameter, we can encode
this to the function name if the waiting functionality is split.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Last use was in the readahead code that got removed by f26c923860
("btrfs: remove reada infrastructure").
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Another conversion to folio API, use the folio locking directly instead
of back and forth page <-> folio conversions.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The check function pattern is supposed to return true/false, currently
there's only one error code.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the folio API, remove page_folio/folio_page conversions.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Continue page to folio updates, sync what the function does with it's
name.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Using the kmem cache freeing directly is clear enough, we don't need to
wrap it. All the users are in the same file.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
