The upstream commit adcfb264c3 ("vmstat: disable vmstat_work on
vmstat_cpu_down_prep()") introduced another warning during the boot phase
so was soon reverted on upstream by commit cd6313beae ("Revert "vmstat:
disable vmstat_work on vmstat_cpu_down_prep()""). This commit resolves it
and reattempts the original fix.
Even after mm/vmstat:online teardown, shepherd may still queue work for
the dying cpu until the cpu is removed from online mask. While it's quite
rare, this means that after unbind_workers() unbinds a per-cpu kworker, it
potentially runs vmstat_update for the dying CPU on an irrelevant cpu
before entering atomic AP states. When CONFIG_DEBUG_PREEMPT=y, it results
in the following error with the backtrace.
BUG: using smp_processor_id() in preemptible [00000000] code: \
kworker/7:3/1702
caller is refresh_cpu_vm_stats+0x235/0x5f0
CPU: 0 UID: 0 PID: 1702 Comm: kworker/7:3 Tainted: G
Tainted: [N]=TEST
Workqueue: mm_percpu_wq vmstat_update
Call Trace:
<TASK>
dump_stack_lvl+0x8d/0xb0
check_preemption_disabled+0xce/0xe0
refresh_cpu_vm_stats+0x235/0x5f0
vmstat_update+0x17/0xa0
process_one_work+0x869/0x1aa0
worker_thread+0x5e5/0x1100
kthread+0x29e/0x380
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x1a/0x30
</TASK>
So, for mm/vmstat:online, disable vmstat_work reliably on teardown and
symmetrically enable it on startup.
For secondary CPUs during CPU hotplug scenarios, ensure the delayed work
is disabled immediately after the initialization. These CPUs are not yet
online when start_shepherd_timer() runs on boot CPU. vmstat_cpu_online()
will enable the work for them.
Link: https://lkml.kernel.org/r/20250108042807.3429745-1-koichiro.den@canonical.com
Signed-off-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Suggested-by: Huacai Chen <chenhuacai@kernel.org>
Tested-by: Charalampos Mitrodimas <charmitro@posteo.net>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If zram_meta_alloc failed early, it frees allocated zram->table without
setting it NULL. Which will potentially cause zram_meta_free to access
the table if user reset an failed and uninitialized device.
Link: https://lkml.kernel.org/r/20250107065446.86928-1-ryncsn@gmail.com
Fixes: 74363ec674 ("zram: fix uninitialized ZRAM not releasing backing device")
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit b1f202060a ("mm: remap unused subpages to shared zeropage
when splitting isolated thp"), cow test cases involving swapping out THPs
via madvise(MADV_PAGEOUT) started to be skipped due to the subsequent
check via pagemap determining that the memory was not actually swapped
out. Logs similar to this were emitted:
...
# [RUN] Basic COW after fork() ... with swapped-out, PTE-mapped THP (16 kB)
ok 2 # SKIP MADV_PAGEOUT did not work, is swap enabled?
# [RUN] Basic COW after fork() ... with single PTE of swapped-out THP (16 kB)
ok 3 # SKIP MADV_PAGEOUT did not work, is swap enabled?
# [RUN] Basic COW after fork() ... with swapped-out, PTE-mapped THP (32 kB)
ok 4 # SKIP MADV_PAGEOUT did not work, is swap enabled?
...
The commit in question introduces the behaviour of scanning THPs and if
their content is predominantly zero, it splits them and replaces the pages
which are wholly zero with the zero page. These cow test cases were
getting caught up in this.
So let's avoid that by filling the contents of all allocated memory with
a non-zero value. With this in place, the tests are passing again.
Link: https://lkml.kernel.org/r/20250107142555.1870101-1-ryan.roberts@arm.com
Fixes: b1f202060a ("mm: remap unused subpages to shared zeropage when splitting isolated thp")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When mremap()ing a memory region previously registered with userfaultfd as
write-protected but without UFFD_FEATURE_EVENT_REMAP, an inconsistency in
flag clearing leads to a mismatch between the vma flags (which have
uffd-wp cleared) and the pte/pmd flags (which do not have uffd-wp
cleared). This mismatch causes a subsequent mprotect(PROT_WRITE) to
trigger a warning in page_table_check_pte_flags() due to setting the pte
to writable while uffd-wp is still set.
Fix this by always explicitly clearing the uffd-wp pte/pmd flags on any
such mremap() so that the values are consistent with the existing clearing
of VM_UFFD_WP. Be careful to clear the logical flag regardless of its
physical form; a PTE bit, a swap PTE bit, or a PTE marker. Cover PTE,
huge PMD and hugetlb paths.
Link: https://lkml.kernel.org/r/20250107144755.1871363-2-ryan.roberts@arm.com
Co-developed-by: Mikołaj Lenczewski <miko.lenczewski@arm.com>
Signed-off-by: Mikołaj Lenczewski <miko.lenczewski@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Closes: https://lore.kernel.org/linux-mm/810b44a8-d2ae-4107-b665-5a42eae2d948@arm.com/
Fixes: 63b2d4174c ("userfaultfd: wp: add the writeprotect API to userfaultfd ioctl")
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In zswap_compress() and zswap_decompress(), the per-CPU acomp_ctx of the
current CPU at the beginning of the operation is retrieved and used
throughout. However, since neither preemption nor migration are disabled,
it is possible that the operation continues on a different CPU.
If the original CPU is hotunplugged while the acomp_ctx is still in use,
we run into a UAF bug as some of the resources attached to the acomp_ctx
are freed during hotunplug in zswap_cpu_comp_dead() (i.e.
acomp_ctx.buffer, acomp_ctx.req, or acomp_ctx.acomp).
The problem was introduced in commit 1ec3b5fe6e ("mm/zswap: move to use
crypto_acomp API for hardware acceleration") when the switch to the
crypto_acomp API was made. Prior to that, the per-CPU crypto_comp was
retrieved using get_cpu_ptr() which disables preemption and makes sure the
CPU cannot go away from under us. Preemption cannot be disabled with the
crypto_acomp API as a sleepable context is needed.
Use the acomp_ctx.mutex to synchronize CPU hotplug callbacks allocating
and freeing resources with compression/decompression paths. Make sure
that acomp_ctx.req is NULL when the resources are freed. In the
compression/decompression paths, check if acomp_ctx.req is NULL after
acquiring the mutex (meaning the CPU was offlined) and retry on the new
CPU.
The initialization of acomp_ctx.mutex is moved from the CPU hotplug
callback to the pool initialization where it belongs (where the mutex is
allocated). In addition to adding clarity, this makes sure that CPU
hotplug cannot reinitialize a mutex that is already locked by
compression/decompression.
Previously a fix was attempted by holding cpus_read_lock() [1]. This
would have caused a potential deadlock as it is possible for code already
holding the lock to fall into reclaim and enter zswap (causing a
deadlock). A fix was also attempted using SRCU for synchronization, but
Johannes pointed out that synchronize_srcu() cannot be used in CPU hotplug
notifiers [2].
Alternative fixes that were considered/attempted and could have worked:
- Refcounting the per-CPU acomp_ctx. This involves complexity in
handling the race between the refcount dropping to zero in
zswap_[de]compress() and the refcount being re-initialized when the
CPU is onlined.
- Disabling migration before getting the per-CPU acomp_ctx [3], but
that's discouraged and is a much bigger hammer than needed, and could
result in subtle performance issues.
[1]https://lkml.kernel.org/20241219212437.2714151-1-yosryahmed@google.com/
[2]https://lkml.kernel.org/20250107074724.1756696-2-yosryahmed@google.com/
[3]https://lkml.kernel.org/20250107222236.2715883-2-yosryahmed@google.com/
[yosryahmed@google.com: remove comment]
Link: https://lkml.kernel.org/r/CAJD7tkaxS1wjn+swugt8QCvQ-rVF5RZnjxwPGX17k8x9zSManA@mail.gmail.com
Link: https://lkml.kernel.org/r/20250108222441.3622031-1-yosryahmed@google.com
Fixes: 1ec3b5fe6e ("mm/zswap: move to use crypto_acomp API for hardware acceleration")
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Closes: https://lore.kernel.org/lkml/20241113213007.GB1564047@cmpxchg.org/
Reported-by: Sam Sun <samsun1006219@gmail.com>
Closes: https://lore.kernel.org/lkml/CAEkJfYMtSdM5HceNsXUDf5haghD5+o2e7Qv4OcuruL4tPg6OaQ@mail.gmail.com/
Cc: Barry Song <baohua@kernel.org>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
hugetlb_file_setup() will pass a NULL @dir to hugetlbfs_get_inode(), so we
will access a NULL pointer for @dir. Fix it and set __entry->dr to 0 if
@dir is NULL. Because ->i_ino cannot be 0 (see get_next_ino()), there is
no confusing if user sees a 0 inode number.
Link: https://lkml.kernel.org/r/20250106033118.4640-1-songmuchun@bytedance.com
Fixes: 318580ad7f ("hugetlbfs: support tracepoint")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: Cheung Wall <zzqq0103.hey@gmail.com>
Closes: https://lore.kernel.org/linux-mm/02858D60-43C1-4863-A84F-3C76A8AF1F15@linux.dev/T/#
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Cc: cheung wall <zzqq0103.hey@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During testing it has been detected, that it is possible to get div by
zero error in bdi_set_min_bytes. The error is caused by the function
bdi_ratio_from_pages(). bdi_ratio_from_pages() calls global_dirty_limits.
If the dirty threshold is 0, the div by zero is raised. This can happen
if the root user is setting:
echo 0 > /proc/sys/vm/dirty_ratio
The following is a test case:
echo 0 > /proc/sys/vm/dirty_ratio
cd /sys/class/bdi/<device>
echo 1 > strict_limit
echo 8192 > min_bytes
==> error is raised.
The problem is addressed by returning -EINVAL if dirty_ratio or
dirty_bytes is set to 0.
[shr@devkernel.io: check for -EINVAL in bdi_set_min_bytes() and bdi_set_max_bytes()]
Link: https://lkml.kernel.org/r/20250108014723.166637-1-shr@devkernel.io
[shr@devkernel.io: v3]
Link: https://lkml.kernel.org/r/20250109063411.6591-1-shr@devkernel.io
Link: https://lkml.kernel.org/r/20250104012037.159386-1-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Reported-by: cheung wall <zzqq0103.hey@gmail.com>
Closes: https://lore.kernel.org/linux-mm/87pll35yd0.fsf@devkernel.io/T/#t
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Qiang Zhang <zzqq0103.hey@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The recently introduced ROX cache for modules is assuming large page
support in 64-bit mode without testing the related feature bit. This
results in breakage when running as a Xen PV guest, as in this mode large
pages are not supported.
Fix that by testing the X86_FEATURE_PSE capability when deciding whether
to enable the ROX cache.
Link: https://lkml.kernel.org/r/20250103065631.26459-1-jgross@suse.com
Fixes: 2e45474ab1 ("execmem: add support for cache of large ROX pages")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On 32-bit kernels, folio_seek_hole_data() was inadvertently truncating a
64-bit value to 32 bits, leading to a possible infinite loop when writing
to an xfs filesystem.
Link: https://lkml.kernel.org/r/20250102190540.1356838-1-marco.nelissen@gmail.com
Fixes: 54fa39ac2e ("iomap: use mapping_seek_hole_data")
Signed-off-by: Marco Nelissen <marco.nelissen@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently vma test is failing because of the new vma_assert_attached()
assertion. The check is failing because previous refcount_set() inside
vma_mark_attached() is a NoOp. Fix the definition of atomic_set() to
correctly set the value of the atomic.
Link: https://lkml.kernel.org/r/20241227222220.1726384-1-surenb@google.com
Fixes: 9325b8b5a1 ("tools: add skeleton code for userland testing of VMA logic")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit fa3bea4e1f introduced MPOL_WEIGHTED_INTERLEAVE but it missed
adding its counter to "interleave_hit" of numastat, which is located at
/sys/devices/system/node/nodeN/ directory.
It'd be better to add weighted interleving counter info to the existing
"interleave_hit" instead of introducing a new counter
"weighted_interleave_hit".
Link: https://lkml.kernel.org/r/20241227095737.645-1-honggyu.kim@sk.com
Fixes: fa3bea4e1f ("mm/mempolicy: introduce MPOL_WEIGHTED_INTERLEAVE for weighted interleaving")
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Hyeonggon Yoo <hyeonggon.yoo@sk.com>
Tested-by: Yunjeong Mun <yunjeong.mun@sk.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit bdf8eafbf7 ("arm64: stacktrace: report source of unwind
data") a stack trace line can contain an additional info field that was not
present before, in the form of one or more letters in parentheses. E.g.:
[ 504.517915] led_sysfs_enable+0x54/0x80 (P)
^^^
When this is present, decode_stacktrace decodes the line incorrectly:
[ 504.517915] led_sysfs_enable+0x54/0x80 P
Extend parsing to decode it correctly:
[ 504.517915] led_sysfs_enable (drivers/leds/led-core.c:455 (discriminator 7)) (P)
The regex to match such lines assumes the info can be extended in the
future to other uppercase characters, and will need to be extended in case
other characters will be used. Using a much more generic regex might incur
in false positives, so this looked like a good tradeoff.
Link: https://lkml.kernel.org/r/20241230-decode_stacktrace-fix-info-v1-1-984910659173@bootlin.com
Fixes: bdf8eafbf7 ("arm64: stacktrace: report source of unwind data")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Puranjay Mohan <puranjay@kernel.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kunit_kzalloc() may return a NULL pointer, dereferencing it without
NULL check may lead to NULL dereference.
Add a NULL check for test_state.
Fixes: 1c8506d626 ("firewire: test: add test of device attributes for simple AV/C device")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://lore.kernel.org/r/20250110084237.8877-1-hanchunchao@inspur.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Updates for v6.14
MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
MDP4:
- several small fixes
DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane)
- fixed modes filtering for platforms w/o 3DMux
- fixed DSPP DSPP_2 / _3 links on several platforms
- corrected DSPP definitions on SDM670
- added CWB hardware blocks support
- added VBIF to DPU snapshots
- dropped struct dpu_rm_requirements
DP:
- reworked DP audio support
DSI:
- added SM6150 (aka QCS615) support
GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsutUu4ff6OpXNXxqf1xaV0rV6oV23VXNRiF0_OEfe72Q@mail.gmail.com
Clock description in DT binding introduced by commit f69060c144
("dt-bindings: rtc: zynqmp: Add clock information") is talking about "rtc"
clock name but driver is checking "rtc_clk" name instead.
Because clock is optional property likely in was never handled properly by
the driver.
Fixes: 07dcc6f9c7 ("rtc: zynqmp: Add calibration set and get support")
Signed-off-by: Michal Simek <michal.simek@amd.com>
Cc: stable@kernel.org
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/cd5f0c9d01ec1f5a240e37a7e0d85b8dacb3a869.1732723280.git.michal.simek@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The TOY_MATCH0_REG should be cleared to 0 in the RTC interrupt handler,
otherwise the interrupt cannot be cleared, which will cause the
loongson_rtc_isr() to be triggered multiple times.
The previous code cleared TOY_MATCH0_REG in the loongson_rtc_handler(),
which is an ACPI interrupt. This did not prevent loongson_rtc_isr()
from being triggered multiple times.
This commit moves the clearing of TOY_MATCH0_REG to the
loongson_rtc_isr() to ensure that the interrupt is properly cleared.
Fixes: 1b733a9ebc ("rtc: Add rtc driver for the Loongson family chips")
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Keguang Zhang <keguang.zhang@gmail.com> # on LS1B
Tested-by: Keguang Zhang <keguang.zhang@gmail.com>
Link: https://lore.kernel.org/r/20241205114307.1891418-1-wangming01@loongson.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The nvmem interface supports variable buffer sizes, while the regmap
interface operates with fixed-size storage. If an nvmem client uses a
buffer size less than 4 bytes, regmap_read will write out of bounds
as it expects the buffer to point at an unsigned int.
Fix this by using an intermediary unsigned int to hold the value.
Fixes: fadfd092ee ("rtc: pcf85063: add nvram support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20241218-rtc-pcf85063-stack-corruption-v1-1-12fd0ee0f046@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The problem is this multiply in tps6594_rtc_set_offset()
tmp = offset * TICKS_PER_HOUR;
The "tmp" variable is an s64 but "offset" is a long in the
(-277774)-277774 range. On 32bit systems a long can hold numbers up to
approximately two billion. The number of TICKS_PER_HOUR is really large,
(32768 * 3600) or roughly a hundred million. When you start multiplying
by a hundred million it doesn't take long to overflow the two billion
mark.
Probably the safest way to fix this is to change the type of
TICKS_PER_HOUR to long long because it's such a large number.
Fixes: 9f67c1e639 ("rtc: tps6594: Add driver for TPS6594 RTC")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/1074175e-5ecb-4e3d-b721-347d794caa90@stanley.mountain
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add logic to initialize I2C adapters with a specific ID if available,
improving device identification and configuration.
For mixed buses, in addition to the i3c alias, an i2c alias can be added to
assign a fixed bus number to the i2c adapter.
This allows an alias node such as:
aliases {
i2c2 = &mixed_bus_a,
i3c2 = &mixed_bus_a,
i3c4 = &mixed_bus_b,
};
/* assigned "i3c-2" and "i2c-2" */
mixed_bus_a: i3c-master {
};
If there is no i2c alias for a mixed bus, the i2c adapter numbers will
remain as is and will be assigned starting after the highest fixed bus
number.
/* assigned "i3c-4" and likely assigned "i2c-3" */
mixed_bus_b: i3c-master {
};
Signed-off-by: Defa Li <defa.li@mediatek.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241212091818.8591-1-defa.li@mediatek.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fix a probe failure in the i3c master driver that occurs when no i3c
devices are connected to the bus.
The issue arises in `i3c_master_bus_init()` where the `ret` value is not
updated after calling `master->ops->set_speed()`. If no devices are
present, `ret` remains set to `I3C_ERROR_M2`, causing the code to
incorrectly proceed to `err_bus_cleanup`.
Cc: stable@vger.kernel.org
Fixes: aef79e189b ("i3c: master: support to adjust first broadcast address speed")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20250108225533.915334-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The kernel has now a generic helper for getting parity with easier to
understand semantics. Make use of it.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250107090204.6593-6-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The kernel has now a generic helper for getting parity with easier to
understand semantics. Make use of it. Here, it also fixes a bug because
the correct algorithm is using XOR ('^=') instead of ADD ('+=').
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20250107090204.6593-5-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The kernel has now a generic helper for getting parity with easier to
understand semantics. Make use of it.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250107090204.6593-4-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Make use of the new generic helper for calculating the parity.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20250107090204.6593-3-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
There are multiple open coded implementations for getting the parity of
a byte in the kernel, even using different approaches. Take the pretty
efficient version from SPD5118 driver and make it generally available by
putting it into the bitops header. As long as there is just one parity
calculation helper, the creation of a distinct 'parity.h' header was
discarded. Also, the usage of hweight8() for architectures having a
popcnt instruction is postponed until a use case within hot paths is
desired. The motivation for this patch is the frequent use of odd parity
in the I3C specification and to simplify drivers there.
Changes compared to the original SPD5118 version are the addition of
kernel documentation, switching the return type from bool to int, and
renaming the argument of the function.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Tested-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20250107090204.6593-2-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add a glue code for the MIPI I3C HCI on PCI bus with Intel Panther Lake
I3C controller PCI IDs.
MIPI I3C HCI on Intel platforms has additional logic around the MIPI I3C
HCI core logic. Those together create so called I3C slice on PCI bus.
Intel specific initialization code does a reset cycle to the I3C slice
before probing the MIPI I3C HCI part.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20241231115904.620052-2-jarkko.nikula@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
MIPI I3C HCI on Intel hardware requires a quirk where ring needs to stop
and set to run again after resuming the halted controller. This is not
expected from the MIPI I3C HCI specification and is Intel specific.
Add this quirk to generic aborted transfer handling and execute it only
when ring is not in running state after a transfer error and attempted
controller resume. This is the case on Intel hardware.
It is not fully clear to me what is the ring running state in generic
hardware in such case. I would expect if ring is not running, then stop
request is a no-op and run request is either required or does the same
what controller resume would do.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20241231115904.620052-1-jarkko.nikula@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The DMA and PIT timers are clocked at fsys/2. Fix it.
While at it, fix the comment naming for DMA timers (duplicated tmr.2).
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>
Signed-off-by: Greg Ungerer <gerg@kernel.org>
A typo mentioned I3C when it should have been I2C.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20241219220338.10315-1-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
In dw_i3c_common_probe, &master->hj_work is bound with
dw_i3c_hj_work. And dw_i3c_master_irq_handler can call
dw_i3c_master_irq_handle_ibis function to start the work.
If we remove the module which will call dw_i3c_common_remove to
make cleanup, it will free master->base through i3c_master_unregister
while the work mentioned above will be used. The sequence of operations
that may lead to a UAF bug is as follows:
CPU0 CPU1
| dw_i3c_hj_work
dw_i3c_common_remove |
i3c_master_unregister(&master->base) |
device_unregister(&master->dev) |
device_release |
//free master->base |
| i3c_master_do_daa(&master->base)
| //use master->base
Fix it by ensuring that the work is canceled before proceeding with
the cleanup in dw_i3c_common_remove.
Fixes: 1dd728f5d4 ("i3c: master: Add driver for Synopsys DesignWare IP")
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://lore.kernel.org/r/bfc49c9527be5b513e7ceafeba314ca40a5be4bc.1732703537.git.xiaopei01@kylinos.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Here are a bunch of small IIO and interconnect and other driver fixes
for 6.13-rc7 to resolve reported issues. Included in here are:
- loads of iio driver fixes as a result of an audit of places where
uninitialized data would leak to userspace.
- other smaller, and normal, iio driver fixes.
- mhi driver fix
- interconnect driver fixes
- pci1xxxx driver fix
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ4PK3g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymClACgyFB9Ce/jlUWUKvX1eCY9xWVMrmwAoMe0nrLG
a2lNOpIQM5K+P7iGz4cT
=Yq71
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a bunch of small IIO and interconnect and other driver fixes
to resolve reported issues. Included in here are:
- loads of iio driver fixes as a result of an audit of places where
uninitialized data would leak to userspace.
- other smaller, and normal, iio driver fixes.
- mhi driver fix
- interconnect driver fixes
- pci1xxxx driver fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (32 commits)
misc: microchip: pci1xxxx: Resolve return code mismatch during GPIO set config
misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling
interconnect: icc-clk: check return values of devm_kasprintf()
interconnect: qcom: icc-rpm: Set the count member before accessing the flex array
iio: adc: ti-ads1119: fix sample size in scan struct for triggered buffer
iio: temperature: tmp006: fix information leak in triggered buffer
iio: inkern: call iio_device_put() only on mapped devices
iio: adc: ad9467: Fix the "don't allow reading vref if not available" case
iio: adc: at91: call input_free_device() on allocated iio_dev
iio: adc: ad7173: fix using shared static info struct
iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep()
iio: adc: ti-ads1119: fix information leak in triggered buffer
iio: pressure: zpa2326: fix information leak in triggered buffer
iio: adc: rockchip_saradc: fix information leak in triggered buffer
iio: imu: kmx61: fix information leak in triggered buffer
iio: light: vcnl4035: fix information leak in triggered buffer
iio: light: bh1745: fix information leak in triggered buffer
iio: adc: ti-ads8688: fix information leak in triggered buffer
iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer
iio: test: Fix GTS test config
...
Here are some small driver core and debugfs fixes for 6.13-rc7 that
resolve some reported problems:
- debugfs runtime error reporting fixes
- topology cpumask race-condition fix
- MAINTAINERS file email update
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ4PLEA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynA9gCeJBLQ3bq6Gmmikx3iNEYFwl7mym8An3uKRXPQ
F7WBfhPwR7n+vVwbSqAj
=cEAK
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs fixes from Greg KH:
"Here are some small driver core and debugfs fixes that resolve some
reported problems:
- debugfs runtime error reporting fixes
- topology cpumask race-condition fix
- MAINTAINERS file email update
All of these have been in linux-next this week with no reported
issues"
* tag 'driver-core-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
fs: debugfs: fix open proxy for unsafe files
MAINTAINERS: align Danilo's maintainer entries
topology: Keep the cpumask unchanged when printing cpumap
debugfs: fix missing mutex_destroy() in short_fops case
fs: debugfs: differentiate short fops with proxy ops
Here are some small staging driver fixes that resolve some reported
issues and have been in my tree for too long due to the holiday break.
They resolve the following issues:
- lots of gpib build-time fixes as reported by testers and 0-day
- gpib logical fixes
- mailmap fix (already in your tree, but git merge should handle it.)
All of these have been in linux-next for a while, with no reported
issues other than the duplicated change.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ4PLTg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yknEACfRy/G6h1DvC9/9WqQA9aWIJLKwcgAn03Rz2Pm
86aUV6HmW1Vh7Ypfbsv+
=6dRm
-----END PGP SIGNATURE-----
Merge tag 'staging-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes that resolve some reported
issues and have been in my tree for too long due to the holiday break.
They resolve the following issues:
- lots of gpib build-time fixes as reported by testers and 0-day
- gpib logical fixes
- mailmap fix
All of these have been in linux-next for a while, with no reported
issues other than the duplicated change"
* tag 'staging-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: gpib: mite: remove unused global functions
staging: gpib: refer to correct config symbol in tnt4882 Makefile
mailmap: update Bingwu Zhang's email address
staging: gpib: fix address space mixup
staging: gpib: use ioport_map
staging: gpib: fix pcmcia dependencies
staging: gpib: add module author and description fields
staging: gpib: fix Makefiles
staging: gpib: make global 'usec_diff' functions static
staging: gpib: Modify mismatched function name
staging: gpib: Add lower bound check for secondary address
staging: gpib: Fix erroneous removal of blank before newline
dev->host_mem_size value is updated only after the successful buffer
allocation of hmb descriptor. Otherwise, it may have some undefined value.
So, use the correct size to free the hmb buffer when the hmb descriptor
buffer allocation failed.
Signed-off-by: Francis Pravin <francis.p@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The xa_store() may fail due to memory allocation failure because there
is no guarantee that the index NVME_CSI_NVM is already used. This fix
introduces a new function to handle the error path.
Fixes: cc115cbe12 ("nvme: always initialize known command effects")
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The recently added WARN() for deprecated #address-cells and #size-cells
triggered a WARN when of_platform_populate() (which calls
of_address_to_resource()) is used on nodes with non-translatable
addresses. This case is expected to return an error.
Rework the bus matching to allow no match and make the default require
an #address-cells property. That should be safe to do as any platform
missing #address-cells would have a warning already.
Fixes: 045b14ca5c ("of: WARN on deprecated #address-cells/#size-cells handling")
Tested-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://lore.kernel.org/r/20250110215030.3637845-2-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
of_address_to_resource() on a non-translatable address should return an
error. Additionally, this case also triggers a spurious WARN for
missing #address-cells/#size-cells.
Link: https://lore.kernel.org/r/20250110215030.3637845-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Here are 3 small serial driver fixes tree. They resolve some reported
issues:
- stm32 break control fix
- 8250 runtime pm usage counter fix
- imx driver locking fix.
All have been in my tree and linux-next for 3 weeks now, with no
reported issues:
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ4PLgQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn4CgCg2grVo/DXCMTPNPfA3IgxnJngCzIAoMIYTEAs
754uq2E3qLijW/FbLuKa
=3Cgn
-----END PGP SIGNATURE-----
Merge tag 'tty-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are three small serial driver fixes tree. They resolve some
reported issues:
- stm32 break control fix
- 8250 runtime pm usage counter fix
- imx driver locking fix
All have been in my tree and linux-next for three weeks now, with no
reported issues"
* tag 'tty-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: stm32: use port lock wrappers for break control
serial: imx: Use uart_port_lock_irq() instead of uart_port_lock()
tty: serial: 8250: Fix another runtime PM usage counter underflow
Here are some small USB driver fixes and new device ids for 6.13-rc7.
Included in here are:
- usb serial new device ids
- typec bugfixes for reported issues
- dwc3 driver fixes
- chipidea driver fixes
- gadget driver fixes
- other minor fixes for reported problems.
All of these have been in linux-next for a while, with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ4PLvw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylwBACgzaEeezzORCot4IG4EZS7WJ6ViQsAnjPSno04
F3JzZwPuZ+xkWbAo+wGk
=uUiH
-----END PGP SIGNATURE-----
Merge tag 'usb-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.13-rc7.
Included in here are:
- usb serial new device ids
- typec bugfixes for reported issues
- dwc3 driver fixes
- chipidea driver fixes
- gadget driver fixes
- other minor fixes for reported problems.
All of these have been in linux-next for a while, with no reported
issues"
* tag 'usb-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Neoway N723-EA support
USB: serial: option: add MeiG Smart SRM815
USB: serial: cp210x: add Phoenix Contact UPS Device
usb: typec: fix pm usage counter imbalance in ucsi_ccg_sync_control()
usb-storage: Add max sectors quirk for Nokia 208
usb: gadget: midi2: Reverse-select at the right place
usb: gadget: f_fs: Remove WARN_ON in functionfs_bind
USB: core: Disable LPM only for non-suspended ports
usb: fix reference leak in usb_new_device()
usb: typec: tcpci: fix NULL pointer issue on shared irq case
usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null
usb: chipidea: ci_hdrc_imx: decrement device's refcount in .remove() and in the error path of .probe()
usb: typec: ucsi: Set orientation as none when connector is unplugged
usb: gadget: configfs: Ignore trailing LF for user strings to cdev
USB: usblp: return error when setting unsupported protocol
usb: gadget: f_uac2: Fix incorrect setting of bNumEndpoints
usb: typec: tcpm/tcpci_maxim: fix error code in max_contaminant_read_resistance_kohm()
usb: host: xhci-plat: set skip_phy_initialization if software node has XHCI_SKIP_PHY_INIT property
usb: dwc3-am62: Disable autosuspend during remove
usb: dwc3: gadget: fix writing NYET threshold
* fix a latent bug when the kernel is compiled in debug mode
* two small UCONTROL fixes and their selftests
arm64:
* always check page state in hyp_ack_unshare()
* align set_id_regs selftest with the fact that ASIDBITS field is RO
* various vPMU fixes for bugs that only affect nested virt
PPC e500:
* Fix a mostly impossible (but just wrong) case where IRQs were
never re-enabled
* Observe host permissions instead of mapping readonly host pages as
guest-writable. This fixes a NULL-pointer dereference in 6.13
* Replace brittle VMA-based attempts at building huge shadow TLB entries
with PTE lookups.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmeDrZkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMX/wf/VPTDn+T0EcWBduH+hJ/g0uxM0TqM
vHmoL8sXrH9yVrqcdlOVXDc9R6h7q44cuOM/ZPBZuR4QAJqcL7b9KDDQWyOphzQt
U6rKDbnDZyEAC5Ti586qncKGoEv7vgL2LOVW5MUyyYzyWAKmNs2HNSIQkKmDEPiQ
KXWMhtncC3x+TbesbwMxwE/F94M7PFVynaoODH/dY8C7ZsPykIBRuUz4WSE/411b
Dy8TOYyesPg4pCT8YASHCt8PIwwBUXpEUfhEqElOGM4I3rOfWXFe1w1VyizXLyO5
lULZ3zfP6+jlWxbz9Nyvb5rSRJO8a6PfmqhsbFavGQau0u/3AR2cLTA92w==
=UpHe
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"The largest part here is for KVM/PPC, where a NULL pointer dereference
was introduced in the 6.13 merge window and is now fixed.
There's some "holiday-induced lateness", as the s390 submaintainer put
it, but otherwise things looks fine.
s390:
- fix a latent bug when the kernel is compiled in debug mode
- two small UCONTROL fixes and their selftests
arm64:
- always check page state in hyp_ack_unshare()
- align set_id_regs selftest with the fact that ASIDBITS field is RO
- various vPMU fixes for bugs that only affect nested virt
PPC e500:
- Fix a mostly impossible (but just wrong) case where IRQs were never
re-enabled
- Observe host permissions instead of mapping readonly host pages as
guest-writable. This fixes a NULL-pointer dereference in 6.13
- Replace brittle VMA-based attempts at building huge shadow TLB
entries with PTE lookups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: e500: perform hugepage check after looking up the PFN
KVM: e500: map readonly host pages for read
KVM: e500: track host-writability of pages
KVM: e500: use shadow TLB entry as witness for writability
KVM: e500: always restore irqs
KVM: s390: selftests: Add has device attr check to uc_attr_mem_limit selftest
KVM: s390: selftests: Add ucontrol gis routing test
KVM: s390: Reject KVM_SET_GSI_ROUTING on ucontrol VMs
KVM: s390: selftests: Add ucontrol flic attr selftests
KVM: s390: Reject setting flic pfault attributes on ucontrol VMs
KVM: s390: vsie: fix virtual/physical address in unpin_scb()
KVM: arm64: Only apply PMCR_EL0.P to the guest range of counters
KVM: arm64: nv: Reload PMU events upon MDCR_EL2.HPME change
KVM: arm64: Use KVM_REQ_RELOAD_PMU to handle PMCR_EL0.E change
KVM: arm64: Add unified helper for reprogramming counters by mask
KVM: arm64: Always check the state from hyp_ack_unshare()
KVM: arm64: Fix set_id_regs selftest for ASIDBITS becoming unwritable
freeing the task and the bpf profiler unwinding the task's user stack
-----BEGIN PGP SIGNATURE-----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=oobp
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.13_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Fix a #GP in the perf user callchain code caused by a race between
uprobe freeing the task and the bpf profiler unwinding the task's
user stack
* tag 'perf_urgent_for_v6.13_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
uprobes: Fix race in uprobe_free_utask
- Remove a wrong BUG_ON in the early static call code which breaks Xen PVH
when booting as dom0
-----BEGIN PGP SIGNATURE-----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=d+mX
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.13_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Check whether shadow stack is active before using the ptrace regset
getter
- Remove a wrong BUG_ON in the early static call code which breaks Xen
PVH when booting as dom0
* tag 'x86_urgent_for_v6.13_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Ensure shadow stack is active before "getting" registers
x86/static-call: Remove early_boot_irqs_disabled check to fix Xen PVH dom0
