Add documentation for the pin controller found on the Renesas RZ/G3E
(R9A09G047) SoC. The RZ/G3E PFC is similar to the RZ/V2H SoC but has more
pins(P00-PS3).
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241216195325.164212-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
RZ/V2H has ports P0-P9 and PA-PB. Add support for defining alpha-numerical
ports in DT using RZV2H_* macros.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241216195325.164212-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Alot of fixes accumulated over the holiday break:
- Static tool fixes, value is already proven to be NULL, possible integer
overflow
- Many bnxt_re fixes:
* Crashes due to a mismatch in the maximum SGE list size
* Don't waste memory for user QPs by creating kernel-only structures
* Fix compatability issues with older HW in some of the new HW features
recently introduced: RTS->RTS feature, work around 9096
* Do not allow destroy_qp to fail
* Validate QP MTU against device limits
* Add missing validation on madatory QP attributes for RTR->RTS
* Report port_num in query_qp as required by the spec
* Fix creation of QPs of the maximum queue size, and in the variable mode
* Allow all QPs to be used on newer HW by limiting a work around only to
HW it affects
* Use the correct MSN table size for variable mode QPs
* Add missing locking in create_qp() accessing the qp_tbl
* Form WQE buffers correctly when some of the buffers are 0 hop
* Don't crash on QP destroy if the userspace doesn't setup the dip_ctx
* Add the missing QP flush handler call on the DWQE path to avoid
hanging on error recovery
* Consistently use ENXIO for return codes if the devices is fatally errored
- Try again to fix VLAN support on iwarp, previous fix was reverted due to
breaking other cards
- Correct error path return code for rdma netlink events
- Remove the seperate net_device pointer in siw and rxe which syzkaller
found a way to UAF
- Fix a UAF of a stack ib_sge in rtrs
- Fix a regression where old mlx5 devices and FW were wrongly activing
new device features and failing
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZ3fvrwAKCRCFwuHvBreF
YSuIAQDNZ8fPvjVdL8x1QIUVParAAewEUv3MbmV1uRVgoG7LrQEAxgw6UIUF4HOw
u6aW8aRXGYM3hG241AKoYnU5yqHl4g0=
=ilfd
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A lot of fixes accumulated over the holiday break:
- Static tool fixes, value is already proven to be NULL, possible
integer overflow
- Many bnxt_re fixes:
- Crashes due to a mismatch in the maximum SGE list size
- Don't waste memory for user QPs by creating kernel-only
structures
- Fix compatability issues with older HW in some of the new HW
features recently introduced: RTS->RTS feature, work around 9096
- Do not allow destroy_qp to fail
- Validate QP MTU against device limits
- Add missing validation on madatory QP attributes for RTR->RTS
- Report port_num in query_qp as required by the spec
- Fix creation of QPs of the maximum queue size, and in the
variable mode
- Allow all QPs to be used on newer HW by limiting a work around
only to HW it affects
- Use the correct MSN table size for variable mode QPs
- Add missing locking in create_qp() accessing the qp_tbl
- Form WQE buffers correctly when some of the buffers are 0 hop
- Don't crash on QP destroy if the userspace doesn't setup the
dip_ctx
- Add the missing QP flush handler call on the DWQE path to avoid
hanging on error recovery
- Consistently use ENXIO for return codes if the devices is
fatally errored
- Try again to fix VLAN support on iwarp, previous fix was reverted
due to breaking other cards
- Correct error path return code for rdma netlink events
- Remove the seperate net_device pointer in siw and rxe which
syzkaller found a way to UAF
- Fix a UAF of a stack ib_sge in rtrs
- Fix a regression where old mlx5 devices and FW were wrongly
activing new device features and failing"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (28 commits)
RDMA/mlx5: Enable multiplane mode only when it is supported
RDMA/bnxt_re: Fix error recovery sequence
RDMA/rtrs: Ensure 'ib_sge list' is accessible
RDMA/rxe: Remove the direct link to net_device
RDMA/hns: Fix missing flush CQE for DWQE
RDMA/hns: Fix warning storm caused by invalid input in IO path
RDMA/hns: Fix accessing invalid dip_ctx during destroying QP
RDMA/hns: Fix mapping error of zero-hop WQE buffer
RDMA/bnxt_re: Fix the locking while accessing the QP table
RDMA/bnxt_re: Fix MSN table size for variable wqe mode
RDMA/bnxt_re: Add send queue size check for variable wqe
RDMA/bnxt_re: Disable use of reserved wqes
RDMA/bnxt_re: Fix max_qp_wrs reported
RDMA/siw: Remove direct link to net_device
RDMA/nldev: Set error code in rdma_nl_notify_event
RDMA/bnxt_re: Fix reporting hw_ver in query_device
RDMA/bnxt_re: Fix to export port num to ib_query_qp
RDMA/bnxt_re: Fix setting mandatory attributes for modify_qp
RDMA/bnxt_re: Add check for path mtu in modify_qp
RDMA/bnxt_re: Fix the check for 9060 condition
...
- A small Kconfig fixup for the i.MX, in principle this
could come in from the SoC tree but the bug was introduced
from the pin control tree so let's fix it from here.
- Fix a sleep in atomic context in the MCP23xxx GPIO expander
by disabling the regmap locking and using explicit
mutex locks.
-----BEGIN PGP SIGNATURE-----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=+Eo1
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- A small Kconfig fixup for the i.MX.
In principle this could come in from the SoC tree but the bug was
introduced from the pin control tree so let's fix it from here.
- Fix a sleep in atomic context in the MCP23xxx GPIO expander by
disabling the regmap locking and using explicit mutex locks.
* tag 'pinctrl-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: mcp23s08: Fix sleeping in atomic context due to regmap locking
ARM: imx: Re-introduce the PINCTRL selection
The first new year PR: no surprise, all small fixes, including:
- Follow-up fixes for the new compress-offload API extension
- A couple of fixes for MIDI 2.0 UMP handling
- A trivial race fix for OSS sequencer emulation ioctls
- USB-audio and HD-audio fixes / quirks
-----BEGIN PGP SIGNATURE-----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=n/AG
-----END PGP SIGNATURE-----
Merge tag 'sound-6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The first new year pull request: no surprises, all small fixes,
including:
- Follow-up fixes for the new compress-offload API extension
- A couple of fixes for MIDI 2.0 UMP handling
- A trivial race fix for OSS sequencer emulation ioctls
- USB-audio and HD-audio fixes / quirks"
* tag 'sound-6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: seq: Check UMP support for midi_version change
ALSA hda/realtek: Add quirk for Framework F111:000C
Revert "ALSA: ump: Don't enumeration invalid groups for legacy rawmidi"
ALSA: seq: oss: Fix races at processing SysEx messages
ALSA: compress_offload: fix remaining descriptor races in sound/core/compress_offload.c
ALSA: compress_offload: Drop unneeded no_free_ptr()
ALSA: hda/tas2781: Ignore SUBSYS_ID not found for tas2563 projects
ALSA: usb-audio: US16x08: Initialize array before use
Set kernel config:
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
Do latter:
mknod loop0 b 7 0
exec 4<> loop0
Before commit e418de3abc ("block: switch gendisk lookup to a simple
xarray"), lookup_gendisk will first use base_probe to load module loop,
and then the retry will call loop_probe to prepare the loop disk. Finally
open for this disk will success. However, after this commit, we lose the
retry logic, and open will fail with ENXIO. Block device autoloading is
deprecated and will be removed soon, but maybe we should keep open success
until we really remove it. So, give a retry to fix it.
Fixes: e418de3abc ("block: switch gendisk lookup to a simple xarray")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241209110435.3670985-1-yangerkun@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
DisplayPort AUX protocol supports I2C transport which is capable of
reading EDID or supports MCCS.
In drm_dp_helper, drm_dp_i2c_xfer() packs I2C requests into a
sequence of AUX requests.
it6505_aux_i2c_operation() is implemented to match drm_dp_i2c_xfer()
operactions.
it6505_aux_i2c_transfer() adds I2C functionality
for it6505_aux_transfer().
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-10-e0fdd4844703@ite.corp-partner.google.com
HDCP must disabled encryption and restart authentication after
waiting KSV for 5s.
The original method uses a counter in a waitting loop that may
wait much longer than it is supposed to.
Use time_after() for KSV wait timeout.
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-9-e0fdd4844703@ite.corp-partner.google.com
When running the HDCP CTS test with UNIGRAF DPR-100.
KSV list must be read from DP_AUX_HDCP_KSV_FIFO in an AUX request,
and can not separate with multiple read requests.
The AUX operation command "CMD_AUX_GET_KSV_LIST" reads the KSV list
with AUX FIFO and is able to read DP_AUX_HDCP_KSV_FIFO in an AUX request.
Add it6505_get_ksvlist() which uses CMD_AUX_GET_KSV_LIST operation
to read the KSV list.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-7-e0fdd4844703@ite.corp-partner.google.com
When starting HDCP authentication, HDCP encryption should be enabled
when R0'is checked.
Change encryption enables time at R0' ready.
The hardware HDCP engine trigger is changed and the repeater KSV fails
will restart HDCP.
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-6-e0fdd4844703@ite.corp-partner.google.com
When HDCP is activated,
a DisplayPort source receiving CP_IRQ from the sink
shall check Bstatus from DPCD and process the corresponding value
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-5-e0fdd4844703@ite.corp-partner.google.com
A HDCP source device shall support max downstream to 127 devices.
Change definition MAX_HDCP_DOWN_STREAM_COUNT to 127
KSVs shall save for DRM blocked devices check.
This results in struct it6505 growth by ~0.5 KiB.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-4-e0fdd4844703@ite.corp-partner.google.com
HDCP KSV list readback can choose to use AUX FIFO or
general data register.
For some DisplayPort devices, the KSV list must be read
in 5 byte boundaries.
The original AUX read command does not support these devices.
The AUX command operation control register "REG_AUX_CMD_REQ" uses b[3:0]
as AUX operacion control, and b[7:4] are status bits and read only.
To change KSV read operation uses "CMD_AUX_NATIVE_READ" from using
the data registers to using AUX FIFO.
The extended command "CMD_AUX_GET_KSV_LIST" is added as
"CMD_AUX_NATIVE_READ" with the 0x10 flag which selects AUX FIFO mode.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-3-e0fdd4844703@ite.corp-partner.google.com
The original AUX operation using data registers is limited to 4 bytes.
The AUX operation command CMD_AUX_I2C_EDID_READ uses AUX FIFO and
is capable of reading 16 bytes.
This improves the speed of EDID read.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-2-e0fdd4844703@ite.corp-partner.google.com
There is a UAF report in the bpf_struct_ops when CONFIG_MODULES=n.
In particular, the report is on tcp_congestion_ops that has
a "struct module *owner" member.
For struct_ops that has a "struct module *owner" member,
it can be extended either by the regular kernel module or
by the bpf_struct_ops. bpf_try_module_get() will be used
to do the refcounting and different refcount is done
based on the owner pointer. When CONFIG_MODULES=n,
the btf_id of the "struct module" is missing:
WARN: resolve_btfids: unresolved symbol module
Thus, the bpf_try_module_get() cannot do the correct refcounting.
Not all subsystem's struct_ops requires the "struct module *owner" member.
e.g. the recent sched_ext_ops.
This patch is to disable bpf_struct_ops registration if
the struct_ops has the "struct module *" member and the
"struct module" btf_id is missing. The btf_type_is_fwd() helper
is moved to the btf.h header file for this test.
This has happened since the beginning of bpf_struct_ops which has gone
through many changes. The Fixes tag is set to a recent commit that this
patch can apply cleanly. Considering CONFIG_MODULES=n is not
common and the age of the issue, targeting for bpf-next also.
Fixes: 1611603537 ("bpf: Create argument information for nullable arguments.")
Reported-by: Robert Morris <rtm@csail.mit.edu>
Closes: https://lore.kernel.org/bpf/74665.1733669976@localhost/
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241220201818.127152-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
i915:
- Fix C10 pll programming sequence [cx0_phy]
- Fix power gate sequence. [dg1]
xe:
- uapi: Revert some devcoredump file format changes
breaking a mesa debug tool
- Fixes around waits when moving to system
- Fix a typo when checking for LMEM provisioning
- Fix a fault on fd close after unbind
- A couple of OA fixes squashed for stable backporting
adv7511:
- fix UAF
- drop single lane support
- audio infoframe fix
-----BEGIN PGP SIGNATURE-----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=H3XD
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2025-01-03' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Happy New Year.
It was fairly quiet for holidays period, certainly nothing that worth
getting off the couch before I needed to, this is for the past two
weeks, i915, xe and some adv7511, I expect we will see some amdgpu etc
happening next week, but otherwise all quiet.
i915:
- Fix C10 pll programming sequence [cx0_phy]
- Fix power gate sequence. [dg1]
xe:
- uapi: Revert some devcoredump file format changes breaking a mesa
debug tool
- Fixes around waits when moving to system
- Fix a typo when checking for LMEM provisioning
- Fix a fault on fd close after unbind
- A couple of OA fixes squashed for stable backporting
adv7511:
- fix UAF
- drop single lane support
- audio infoframe fix"
* tag 'drm-fixes-2025-01-03' of https://gitlab.freedesktop.org/drm/kernel:
xe/oa: Fix query mode of operation for OAR/OAC
drm/i915/dg1: Fix power gate sequence.
drm/i915/cx0_phy: Fix C10 pll programming sequence
drm/xe: Fix fault on fd close after unbind
drm/xe/pf: Use correct function to check LMEM provisioning
drm/xe: Wait for migration job before unmapping pages
drm/xe: Use non-interruptible wait when moving BO to system
drm/xe: Revert some changes that break a mesa debug tool
drm: adv7511: Drop dsi single lane support
dt-bindings: display: adi,adv7533: Drop single lane support
drm: adv7511: Fix use-after-free in adv7533_attach_dsi()
drm/bridge: adv7511_audio: Update Audio InfoFrame properly
Legacy AMD systems include an integrated Northbridge that is represented
by MCA bank 4. This is the only non-core MCA bank in legacy systems. The
Northbridge is physically shared by all the CPUs within an AMD "Node".
However, in practice the "shared" MCA bank can only by managed by a
single CPU within that AMD Node. This is known as the "Node Base Core"
(NBC). For example, only the NBC will be able to read the MCA bank 4
registers; they will be Read-as-Zero for other CPUs. Also, the MCA
Thresholding interrupt will only signal the NBC; the other CPUs will not
receive it. This is enforced by hardware, and it should not be managed by
software.
The current AMD Thresholding code attempts to deal with the "shared" MCA
bank by micromanaging the bank's sysfs kobjects. However, this does not
follow the intended kobject use cases. It is also fragile, and it has
caused bugs in the past.
Modern AMD systems do not need this shared MCA bank support, and it
should not be needed on legacy systems either.
Remove the shared threshold bank code. Also, move the threshold struct
definitions to mce/amd.c, since they are no longer needed in amd_nb.c.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241206161210.163701-2-yazen.ghannam@amd.com
- Add needed READ_ONCE() around access to the fgraph array element
The updates to the fgraph array can happen when callbacks are registered
and unregistered. The __ftrace_return_to_handler() can handle reading
either the old value or the new value. But once it reads that value
it must stay consistent otherwise the check that looks to see if the
value is a stub may show false, but if the compiler decides to re-read
after that check, it can be true which can cause the code to crash
later on.
- Make function profiler use the top level ops for filtering again
When function graph became available for instances, its filter ops became
independent from the top level set_ftrace_filter. In the process the
function profiler received its own filter ops as well. But the function
profiler uses the top level set_ftrace_filter file and does not have one
of its own. In giving it its own filter ops, it lost any user interface
it once had. Make it use the top level set_ftrace_filter file again.
This fixes a regression.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ3cR4RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qjxfAQCPhNztdmGmEYmuBtONPHwejidWnuJ6
Rl2mQxEbp40OUgD+JvSWofhRsvtXWlymqZ9j+dKMegLqMeq834hB0LK4NAg=
=+KqV
-----END PGP SIGNATURE-----
Merge tag 'ftrace-v6.13-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace fixes from Steven Rostedt:
- Add needed READ_ONCE() around access to the fgraph array element
The updates to the fgraph array can happen when callbacks are
registered and unregistered. The __ftrace_return_to_handler() can
handle reading either the old value or the new value. But once it
reads that value it must stay consistent otherwise the check that
looks to see if the value is a stub may show false, but if the
compiler decides to re-read after that check, it can be true which
can cause the code to crash later on.
- Make function profiler use the top level ops for filtering again
When function graph became available for instances, its filter ops
became independent from the top level set_ftrace_filter. In the
process the function profiler received its own filter ops as well.
But the function profiler uses the top level set_ftrace_filter file
and does not have one of its own. In giving it its own filter ops, it
lost any user interface it once had. Make it use the top level
set_ftrace_filter file again. This fixes a regression.
* tag 'ftrace-v6.13-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Fix function profiler's filtering functionality
fgraph: Add READ_ONCE() when accessing fgraph_array[]
As we don't use iov_iter_advance() but our own logic in io_import_fixed(),
we can remove the logic that over-sets the iter's count to len + offset
then adjusts it later to len. This helps to make the code cleaner.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://lore.kernel.org/r/20250103150412.12549-1-minhquangbui99@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104190636.274926-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
For non-pollable files, buffer ring consumption will commit upfront.
This is fine, but io_ring_buffer_select() will return the address of the
buffer after having committed it. For incrementally consumed buffers,
this is incorrect as it will modify the buffer address.
Store the pre-committed value and return that. If that isn't done, then
the initial part of the buffer is not used and the application will
correctly assume the content arrived at the start of the userspace
buffer, but the kernel will have put it later in the buffer. Or it can
cause a spurious -EFAULT returned in the CQE, depending on the buffer
size. As bounds are suitably checked for doing the actual IO, no adverse
side effects are possible - it's just a data misplacement within the
existing buffer.
Reported-by: Gwendal Fernet <gwendalfernet@gmail.com>
Cc: stable@vger.kernel.org
Fixes: ae98dbf43d ("io_uring/kbuf: add support for incremental buffer consumption")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit 50a062a762 ("cpufreq/amd-pstate: Store the boost numerator as
highest perf again") updated the value stored for highest perf to no longer
store the highest perf value but instead the boost numerator.
This is a fixed value for systems with preferred cores and not appropriate
for use ITMT rankings. Update the value used for ITMT rankings to be the
preferred core ranking.
Reported-and-tested-by: Sebastian <sobrus@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219640
Fixes: 50a062a762 ("cpufreq/amd-pstate: Store the boost numerator as highest perf again")
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Link: https://lore.kernel.org/r/20250102141204.3413202-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Once a sim device is instantiated and actively used, allowing rmdir for
its configfs serves no purpose and can be confusing. Effectively,
arbitrary users start depending on its existence.
Make the subsystem itself depend on the configfs entry for a sim device
while it is in active use.
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250103141829.430662-5-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Once a virtuser device is instantiated and actively used, allowing rmdir
for its configfs serves no purpose and can be confusing. Userspace
interacts with the virtual consumer at arbitrary times, meaning it
depends on its existence.
Make the subsystem itself depend on the configfs entry for a virtuser
device while it is in active use.
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250103141829.430662-4-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Creating a virtuser device via configfs with multiple conn_ids fails due
to incorrect indexing of lookup entries. Correct the indexing logic to
ensure proper functionality when multiple gpio_virtuser_lookup are
created.
Fixes: 91581c4b3f ("gpio: virtuser: new virtual testing driver for the GPIO API")
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250103141829.430662-3-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When a virtuser device is created via configfs and the probe fails due
to an incorrect lookup table, the table is not removed. This prevents
subsequent probe attempts from succeeding, even if the issue is
corrected, unless the device is released. Additionally, cleanup is also
needed in the less likely case of platform_device_register_full()
failure.
Besides, a consistent memory leak in lookup_table->dev_id was spotted
using kmemleak by toggling the live state between 0 and 1 with a correct
lookup table.
Introduce gpio_virtuser_remove_lookup_table() as the counterpart to the
existing gpio_virtuser_make_lookup_table() and call it from all
necessary points to ensure proper cleanup.
Fixes: 91581c4b3f ("gpio: virtuser: new virtual testing driver for the GPIO API")
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250103141829.430662-2-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Caching RS parity bytes is already done in fec_decode_bufs() now,
no need to use yet another buffer for conversion to uint16_t.
This patch removes that double copy of RS parity bytes.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
This patch fixes an issue that was fixed in the commit
df7b59ba92 ("dm verity: fix FEC for RS roots unaligned to block size")
but later broken again in the commit
8ca7cab82b ("dm verity fec: fix misaligned RS roots IO")
If the Reed-Solomon roots setting spans multiple blocks, the code does not
use proper parity bytes and randomly fails to repair even trivial errors.
This bug cannot happen if the sector size is multiple of RS roots
setting (Android case with roots 2).
The previous solution was to find a dm-bufio block size that is multiple
of the device sector size and roots size. Unfortunately, the optimization
in commit 8ca7cab82b ("dm verity fec: fix misaligned RS roots IO")
is incorrect and uses data block size for some roots (for example, it uses
4096 block size for roots = 20).
This patch uses a different approach:
- It always uses a configured data block size for dm-bufio to avoid
possible misaligned IOs.
- and it caches the processed parity bytes, so it can join it
if it spans two blocks.
As the RS calculation is called only if an error is detected and
the process is computationally intensive, copying a few more bytes
should not introduce performance issues.
The issue was reported to cryptsetup with trivial reproducer
https://gitlab.com/cryptsetup/cryptsetup/-/issues/923
Reproducer (with roots=20):
# create verity device with RS FEC
dd if=/dev/urandom of=data.img bs=4096 count=8 status=none
veritysetup format data.img hash.img --fec-device=fec.img --fec-roots=20 | \
awk '/^Root hash/{ print $3 }' >roothash
# create an erasure that should always be repairable with this roots setting
dd if=/dev/zero of=data.img conv=notrunc bs=1 count=4 seek=4 status=none
# try to read it through dm-verity
veritysetup open data.img test hash.img --fec-device=fec.img --fec-roots=20 $(cat roothash)
dd if=/dev/mapper/test of=/dev/null bs=4096 status=noxfer
Even now the log says it cannot repair it:
: verity-fec: 7:1: FEC 0: failed to correct: -74
: device-mapper: verity: 7:1: data block 0 is corrupted
...
With this fix, errors are properly repaired.
: verity-fec: 7:1: FEC 0: corrected 4 errors
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Fixes: 8ca7cab82b ("dm verity fec: fix misaligned RS roots IO")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
If the <kunit/platform_device.h> header is included in a test without
certain other headers, it produces compiler warnings like:
In file included from [...]
../include/kunit/platform_device.h:15:57: warning: ‘struct completion’
declared inside parameter list will not be visible outside of this
definition or declaration
15 | struct completion *x);
| ^~~~~~~~~~
Add a 'struct completion' forward declaration to resolve this.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412241958.dbAImJsA-lkp@intel.com/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20241213180841.3023843-1-briannorris@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Debugging incorrect UAPI usage tends to be a bit painful, so add a
helper macro to make it easier to add debug logging which can be enabled
at runtime via drm.debug.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/630578/
The call chain on a5xx_gpu_init is such that pdev is not going to be
null, so the null check on pdev can be removed. This also cleans up
a static analysis warning where pdev is dereferenced before the null
check which cannot actually occur.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/624180/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The "submit->cmd[i].size" and "submit->cmd[i].offset" variables are u32
values that come from the user via the submit_lookup_cmds() function.
This addition could lead to an integer wrapping bug so use size_add()
to prevent that.
Fixes: 198725337e ("drm/msm: fix cmdstream size check")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/624696/
Signed-off-by: Rob Clark <robdclark@chromium.org>
This adds MSM_PARAM_UCHE_TRAP_BASE that will be used by Mesa
implementation for VK_KHR_shader_clock and GL_ARB_shader_clock.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Patchwork: https://patchwork.freedesktop.org/patch/627036/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Now all the DDR bandwidth voting via the GPU Management Unit (GMU)
is in place, declare the Bus Control Modules (BCMs) and the
corresponding parameters in the GPU info struct.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629401/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The Adreno GPU Management Unit (GMU) can also scale the DDR Bandwidth
along the Frequency and Power Domain level, until now we left the OPP
core scale the OPP bandwidth via the interconnect path.
In order to enable bandwidth voting via the GPU Management
Unit (GMU), when an opp is set by devfreq we also look for
the corresponding bandwidth index in the previously generated
bw_table and pass this value along the frequency index to the GMU.
The GMU also takes another vote called AB which is a 16bit quantized
value of the floor bandwidth against the maximum supported bandwidth.
The AB is calculated with a default 25% of the bandwidth like the
downstream implementation too inform the GMU firmware the minimal
quantity of bandwidth we require for this OPP. Only pass the AB
vote starting from A750 GPUs.
Since we now vote for all resources via the GMU, setting the OPP
is no more needed, so we can completely skip calling
dev_pm_opp_set_opp() in this situation.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/629397/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The Adreno GPU Management Unit (GMU) can also scale the ddr
bandwidth along the frequency and power domain level, but for
now we statically fill the bw_table with values from the
downstream driver.
Only the first entry is used, which is a disable vote, so we
currently rely on scaling via the linux interconnect paths.
Let's dynamically generate the bw_table with the vote values
previously calculated from the OPPs.
Those entries will then be used by the GMU when passing the
appropriate bandwidth level while voting for a gpu frequency.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/629396/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The Adreno GPU Management Unit (GMU) can also scale DDR Bandwidth along
the Frequency and Power Domain level, but by default we leave the
OPP core scale the interconnect ddr path.
While scaling via the interconnect path was sufficient, newer GPUs
like the A750 requires specific vote paremeters and bandwidth to
achieve full functionality.
In order to calculate vote values used by the GPU Management
Unit (GMU), we need to parse all the possible OPP Bandwidths and
create a vote value to be sent to the appropriate Bus Control
Modules (BCMs) declared in the GPU info struct.
This vote value is called IB, while on the other side the GMU also
takes another vote called AB which is a 16bit quantized value
of the floor bandwidth against the maximum supported bandwidth.
The AB vote will be calculated later when setting the frequency.
The vote array will then be used to dynamically generate the GMU
bw_table sent during the GMU power-up.
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/629395/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Even if the code uses ARRAY_SIZE() to fill those tables,
it's still a best practice to not use magic values for
tables in structs.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629393/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Log the version for informational purposes, such as for keeping track
of possible GMU fw-related failures in crash / CI logs.
Intentionally not implemented on the if (gmu->legacy) codepath, as
these registers seem not to be used on there.
Downstream additionally warns if the firmware version is too old for
a given GPU, but we already pair the binary to a given GPU, so let's
not go there at the moment.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/629934/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add a register that contains the GMU core firmware version on non-
legacy (non-sdm845-family) SoCs.
The name is guesstimated based on what it does downstream, but it'll
do.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/629932/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Lines beginning with '#' in the IMA policy are comments and are ignored.
Instead of placing the rule and comment on separate lines, allow the
comment to be suffixed to the IMA policy rule.
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
With a custom policy similar to the builtin IMA 'tcb' policy [1], arch
specific policy, and a kexec boot command line measurement policy rule,
the kexec boot command line is not measured due to the dont_measure
tmpfs rule.
Limit the builtin 'tcb' dont_measure tmpfs policy rule to just the
"func=FILE_CHECK" hook. Depending on the end users security threat
model, a custom policy might not even include this dont_measure tmpfs
rule.
Note: as a result of this policy rule change, other measurements might
also be included in the IMA-measurement list that previously weren't
included.
[1] https://ima-doc.readthedocs.io/en/latest/ima-policy.html#ima-tcb
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
When SST-TF is disabled, the TRL (Turbo Ratio Limit) of config level 0
is getting restored. But the TRL of current level should be restored
which may not be config level 0.
This is caused by a bug in treating config level as TRL level. So
arguments needs to be swapped.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
