Implement `pci::Bar`, `pci::Device::iomap_region` and
`pci::Device::iomap_region_sized` to allow for I/O mappings of PCI BARs.
To ensure that a `pci::Bar`, and hence the I/O memory mapping, can't
out-live the PCI device, the `pci::Bar` type is always embedded into a
`Devres` container, such that the `pci::Bar` is revoked once the device
is unbound and hence the I/O mapped memory is unmapped.
A `pci::Bar` can be requested with (`pci::Device::iomap_region_sized`) or
without (`pci::Device::iomap_region`) a const generic representing the
minimal requested size of the I/O mapped memory region. In case of the
latter only runtime checked I/O reads / writes are possible.
Co-developed-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-11-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement the basic PCI abstractions required to write a basic PCI
driver. This includes the following data structures:
The `pci::Driver` trait represents the interface to the driver and
provides `pci::Driver::probe` for the driver to implement.
The `pci::Device` abstraction represents a `struct pci_dev` and provides
abstractions for common functions, such as `pci::Device::set_master`.
In order to provide the PCI specific parts to a generic
`driver::Registration` the `driver::RegistrationOps` trait is implemented
by `pci::Adapter`.
`pci::DeviceId` implements PCI device IDs based on the generic
`device_id::RawDevceId` abstraction.
Co-developed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-10-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a Rust abstraction for the kernel's devres (device resource
management) implementation.
The Devres type acts as a container to manage the lifetime and
accessibility of device bound resources. Therefore it registers a
devres callback and revokes access to the resource on invocation.
Users of the Devres abstraction can simply free the corresponding
resources in their Drop implementation, which is invoked when either the
Devres instance goes out of scope or the devres callback leads to the
resource being revoked, which implies a call to drop_in_place().
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-9-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revocable allows access to objects to be safely revoked at run time.
This is useful, for example, for resources allocated during device probe;
when the device is removed, the driver should stop accessing the device
resources even if another state is kept in memory due to existing
references (i.e., device context data is ref-counted and has a non-zero
refcount after removal of the device).
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Co-developed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-7-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Analogous to `Opaque::new` add `Opaque::pin_init`, which instead of a
value `T` takes a `PinInit<T>` and returns a `PinInit<Opaque<T>>`.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Tested-by: Fabien Parent <fabien.parent@linaro.org>
Link: https://lore.kernel.org/r/20241219170425.12036-6-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Most subsystems use some kind of ID to match devices and drivers. Hence,
we have to provide Rust drivers an abstraction to register an ID table
for the driver to match.
Generally, those IDs are subsystem specific and hence need to be
implemented by the corresponding subsystem. However, the `IdArray`,
`IdTable` and `RawDeviceId` types provide a generalized implementation
that makes the life of subsystems easier to do so.
Co-developed-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Co-developed-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Tested-by: Fabien Parent <fabien.parent@linaro.org>
Link: https://lore.kernel.org/r/20241219170425.12036-4-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement the generic `Registration` type and the `RegistrationOps`
trait.
The `Registration` structure is the common type that represents a driver
registration and is typically bound to the lifetime of a module. However,
it doesn't implement actual calls to the kernel's driver core to register
drivers itself.
Instead the `RegistrationOps` trait is provided to subsystems, which have
to implement `RegistrationOps::register` and
`RegistrationOps::unregister`. Subsystems have to provide an
implementation for both of those methods where the subsystem specific
variants to register / unregister a driver have to implemented.
For instance, the PCI subsystem would call __pci_register_driver() from
`RegistrationOps::register` and pci_unregister_driver() from
`DrvierOps::unregister`.
Co-developed-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Tested-by: Fabien Parent <fabien.parent@linaro.org>
Link: https://lore.kernel.org/r/20241219170425.12036-3-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to access static metadata of a Rust kernel module, add the
`ModuleMetadata` trait.
In particular, this trait provides the name of a Rust kernel module as
specified by the `module!` macro.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Tested-by: Fabien Parent <fabien.parent@linaro.org>
Link: https://lore.kernel.org/r/20241219170425.12036-2-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Allwinner A100 has a system configuration block, denoted as SYS_CFG
in the user manual's memory map. It is undocumented in the manual, but
a glance at the vendor tree shows this block is similar to its
predecessors in the A64 and H6. The A100 also has 3 SRAM blocks: A1, A2,
and C. Add all of these to the SoC's device tree.
Reviewed-by: Parthiban Nallathambi <parthiban@linumiz.com>
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Link: https://patch.msgid.link/20241218-a100-syscon-v2-2-dae60b9ce192@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The Allwinner A100 has a system configuration block similar to that of
the A64 and H6. Add a compatible for it.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Link: https://patch.msgid.link/20241218-a100-syscon-v2-1-dae60b9ce192@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Installs the .so and .py files generated by SWIG to system's site packages
directory. This allows the Python bindings to be used system wide. This
commit also includes documentation on setting up and installing the Python
bindings.
Link: https://lore.kernel.org/r/20241219012606.38963-1-jwyatt@redhat.com
Signed-off-by: "John B. Wyatt IV" <jwyatt@redhat.com>
Signed-off-by: "John B. Wyatt IV" <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The amd-pstate section is grouped under boost, which isn't appropriate.
Adjust the indentation so that it is it's own section.
Link: https://lore.kernel.org/r/20241218191144.3440854-8-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When EPP has been enabled the hardware will autonomously change
frequencies on it's own and thus there is no latency with changing
from the kernel.
Avoid doing the maximum latency check when EPP is found. This will
apply to both amd-pstate and intel-pstate drivers.
Link: https://lore.kernel.org/r/20241218191144.3440854-7-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The EPP value is useful for characterization of performance. Show
it in cpupower frequency-info output.
Link: https://lore.kernel.org/r/20241218191144.3440854-6-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When the amd-pstate is in use frequency is set by the hardware and
measured by the kernel through using the aperf and mperf registers.
There is no direct call to the hardware to indicate current frequency.
Detect that this feature is in use and skip the check.
Link: https://lore.kernel.org/r/20241218191144.3440854-5-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The rankings are useful information to determine if the scheduler
is placing tasks appropriately for the hardware.
Link: https://lore.kernel.org/r/20241218191144.3440854-4-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When cpufreq_get_sysfs_value_from_table() is passed a table with
kernel strings that report 'enabled' or 'disabled' it always returns 0
because these can't cleanly convert to integers.
Explicitly look for enabled or disabled strings from the kernel to handle
this.
Link: https://lore.kernel.org/r/20241218191144.3440854-3-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
print_duration() has a return; statement at the end of the function
that is not necessary as it's a void function.
Link: https://lore.kernel.org/r/20241218191144.3440854-2-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Replaced 'down_interruptible()' and 'up()' calls
with 'wait_for_completion_interruptible()' and
'complete()' respectively. The completion API
simplifies the code and adheres to kernel best
practices for synchronization primitive
Signed-off-by: Santosh Mahto <eisantosh95@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20241212162112.13083-1-eisantosh95@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After removing code isolated by DBG_RX_SIGNAL_DISPLAY_RAW_DATA cflag,
HAL_DEF_DBG_RX_INFO_DUMP enum lost it's use. Removing the enum
and the caller.
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20241211233415.37702-3-rodrigo.gobbi.7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
remove code depending on cflag since it's not compiling
and there is no reference for it's usage;
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20241211233415.37702-2-rodrigo.gobbi.7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's a warning when using checkpatch.pl check rtw_io.c:
WARNING: Missing a blank line after declarations
146: FILE: drivers/staging/rtl8723bs/core/rtw_io.c:146:
int value = atomic_inc_return(&dvobj->continual_io_error);
if (value > MAX_CONTINUAL_IO_ERR)
The patch fixes it.
In addition, also rename 'value' variable to 'error_count' and drop
'ret' variable.
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20241205021610.523528-1-zhaochenguang@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I used to contribute to the kernel as 'Bingwu Zhang
<xtexchooser@duck.com>' and 'Zhang Bingwu <xtexchooser@duck.com>'.
Signed-off-by: Bingwu Zhang <xtex@aosc.io>
Link: https://lore.kernel.org/r/20241208041352.168131-2-xtex@envs.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The tnt4882 backend has a rather elabolate way of abstracting the
PIO and MMIO based hardware variants, duplicating the functionality
of ioport_map() in a less portable way.
Change it to use ioport_map() with ioread8()/iowrite8() to do
this more easily.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241213064959.1045243-2-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With CONFIG_PCMCIA=m, the gpib drivers that optionally support PCMCIA
cannot be built-in.
Add a Kconfig dependency to force these to be loadable modules as
well, and change the GPIB_PCMCIA symbol to have the correct state
for that.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241213064959.1045243-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The FMH driver is still missing both, so take them from the comment
at the start of the file.
Fixes: 8e4841a088 ("staging: gpib: Add Frank Mori Hess FPGA PCI GPIB driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com>
Link: https://lore.kernel.org/r/20241213083119.2607901-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having gpib drivers built-in rather than as loadable modules causes
link failure because the drivers are never actually built:
arm-linux-gnueabi-ld: drivers/staging/gpib/fmh_gpib/fmh_gpib.o: in function `fmh_gpib_t1_delay':
fmh_gpib.c:(.text+0x3b0): undefined reference to `nec7210_t1_delay'
arm-linux-gnueabi-ld: drivers/staging/gpib/fmh_gpib/fmh_gpib.o: in function `fmh_gpib_serial_poll_status':
fmh_gpib.c:(.text+0x418): undefined reference to `nec7210_serial_poll_status'
arm-linux-gnueabi-ld: drivers/staging/gpib/fmh_gpib/fmh_gpib.o: in function `fmh_gpib_secondary_address':
fmh_gpib.c:(.text+0x57c): undefined reference to `nec7210_secondary_address'
arm-linux-gnueabi-ld: drivers/staging/gpib/fmh_gpib/fmh_gpib.o: in function `fmh_gpib_primary_address':
fmh_gpib.c:(.text+0x5ac): undefined reference to `nec7210_primary_address'
Change this to use the correct Makefile syntax, setting either obj-m or obj-y.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241212154245.1411411-2-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trying to build both gpib_bitbang and lpvo_usb_gpib into the kernel
reveals a function that should have been static and is also duplicated:
x86_64-linux-ld: drivers/staging/gpib/lpvo_usb_gpib/lpvo_usb_gpib.o: in function `usec_diff':
lpvo_usb_gpib.c:(.text+0x23c0): multiple definition of `usec_diff'; drivers/staging/gpib/gpio/gpib_bitbang.o:gpib_bitbang.c:(.text+0x2470): first defined here
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241212154245.1411411-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No functional modification involved.
drivers/staging/gpib/lpvo_usb_gpib/lpvo_usb_gpib.c:676: warning: expecting prototype for interface_clear(). Prototype was for usb_gpib_interface_clear() instead.
drivers/staging/gpib/lpvo_usb_gpib/lpvo_usb_gpib.c:654: warning: expecting prototype for go_to_standby(). Prototype was for usb_gpib_go_to_standby() instead.
drivers/staging/gpib/lpvo_usb_gpib/lpvo_usb_gpib.c:636: warning: expecting prototype for enable_eos(). Prototype was for usb_gpib_enable_eos() instead.
drivers/staging/gpib/lpvo_usb_gpib/lpvo_usb_gpib.c:618: warning: expecting prototype for disable_eos(). Prototype was for usb_gpib_disable_eos() instead.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=12253
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241206022504.69670-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 9dde4559e9 ("staging: gpib: Add GPIB common core driver")
from Sep 18, 2024 (linux-next), leads to the following Smatch static
checker warning:
drivers/staging/gpib/common/gpib_os.c:541 dvrsp()
warn: no lower bound on 'sad' rl='s32min-30'
The value -1 was introduced in user land to signify No secondary address
to the driver so that a lower bound check could be added.
This patch adds that check.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-staging/4efd91f3-4259-4e95-a4e0-925853b98858@stanley.mountain/
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20241207123410.28759-1-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB_GPIB_SET_LINES command string used to be: "\nIBDC \n" but when
we were merging this code into the upstream kernel we deleted the space
character before the newline to make checkpatch happy. That turned
out to be a mistake.
The "\nIBDC" part of the string is a command that we pass to the
firmware and the next character is a variable u8 value.
It gets set in set_control_line().
msg[leng - 2] = value ? (retval & ~line) : retval | line;
where leng is the length of the command string.
Imagine the parameter was supposed to be "8".
With the pre-merge code the command string would be "\nIBDC8\n"
With the post-merge code the command string became "\nIBD8\n"
The firmware doesn't recognize "IBD8" as a valid command and rejects it.
Putting a "." where the parameter is supposed to go fixes the driver
and makes checkpatch happy. Same thing with the other define and
the in-line assignment.
Reported-by: Marcello Carla' <marcello.carla@gmx.com>
Fixes: fce79512a9 ("staging: gpib: Add LPVO DIY USB GPIB driver")
Co-developed-by: Marcello Carla' <marcello.carla@gmx.com>
Signed-off-by: Marcello Carla' <marcello.carla@gmx.com>
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20241205093442.5796-1-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Put generic probe functionality into a separate function and let the I2C
driver call it. This is a preparation for adding I3C support which will
also use the generic probe function.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20241219225522.3490-11-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The regmap-only conversion allows us to store the client-pointer as the
'context' parameter for regmap. This not only makes the private struct
smaller, but also allows proper separation of I2C and I3C in the future.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20241219225522.3490-10-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
devm_regulator_get_enable() was introduced exactly to avoid open coding
regulator handling like in this driver. Make use of this helper.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20241219225522.3490-9-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
After previous refactoring, it is now possible to make
lm75_write_config() a simple inline function.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20241219225522.3490-8-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Hide register size differences in regmap access functions to simplify
runtime code and to simplify adding support for I3C devices. Also
use regmap API functions for bit operations where possible.
For this to work, the 16-bit and 8-bit configuration register has to be
mapped to a 16-bit value. Unlike other registers, this register is a
low-byte-first register, presumably for compatibility with chips with
8-bit wide configuration registers. Hide the differences in the regmap
access code.
While at it, enable alarm attribute support for TMP112.
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The new RDPMC enhancement, metrics clear mode, is to clear the
PERF_METRICS-related resources as well as the fixed-function performance
monitoring counter 3 after the read is performed. It is available for
ring 3. The feature is enumerated by the
IA32_PERF_CAPABILITIES.RDPMC_CLEAR_METRICS[bit 19]. To enable the
feature, the IA32_FIXED_CTR_CTRL.METRICS_CLEAR_EN[bit 14] must be set.
Two ways were considered to enable the feature.
- Expose a knob in the sysfs globally. One user may affect the
measurement of other users when changing the knob. The solution is
dropped.
- Introduce a new event format, metrics_clear, for the slots event to
disable/enable the feature only for the current process. Users can
utilize the feature as needed.
The latter solution is implemented in the patch.
The current KVM doesn't support the perf metrics yet. For
virtualization, the feature can be enabled later separately.
Suggested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20241211160318.235056-1-kan.liang@linux.intel.com
A common pattern seen when wake_qs are used to defer a wakeup
until after a lock is released is something like:
preempt_disable();
raw_spin_unlock(lock);
wake_up_q(wake_q);
preempt_enable();
So create some raw_spin_unlock*_wake() helper functions to clean
this up.
Applies on top of the fix I submitted here:
https://lore.kernel.org/lkml/20241212222138.2400498-1-jstultz@google.com/
NOTE: I recognise the unlock()/unlock_irq()/unlock_irqrestore()
variants creates its own duplication, which we could use a macro
to generate the similar functions, but I often dislike how those
generation macros making finding the actual implementation
harder, so I left the three functions as is. If folks would
prefer otherwise, let me know and I'll switch it.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241217040803.243420-1-jstultz@google.com
Update the Schedstat version to 17 as more fields are added to report
different kinds of imbalances in the sched domain. Also domain field
started printing corresponding domain name.
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241220063224.17767-7-swapnil.sapkal@amd.com
Currently, there does not exist a straightforward way to extract the
names of the sched domains and match them to the per-cpu domain entry in
/proc/schedstat other than looking at the debugfs files which are only
visible after enabling "verbose" debug after commit 34320745df
("sched/debug: Put sched/domains files under the verbose flag")
Since tools like `perf sched stats`[1] require displaying per-domain
information in user friendly manner, display the names of sched domain,
alongside their level in /proc/schedstat.
Domain names also makes the /proc/schedstat data unambiguous when some
of the cpus are offline. For example, on a 128 cpus AMD Zen3 machine
where CPU0 and CPU64 are SMT siblings and CPU64 is offline:
Before:
cpu0 ...
domain0 ...
domain1 ...
cpu1 ...
domain0 ...
domain1 ...
domain2 ...
After:
cpu0 ...
domain0 MC ...
domain1 PKG ...
cpu1 ...
domain0 SMT ...
domain1 MC ...
domain2 PKG ...
[1] https://lore.kernel.org/lkml/20241122084452.1064968-1-swapnil.sapkal@amd.com/
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20241220063224.17767-6-swapnil.sapkal@amd.com
In /proc/schedstat, lb_imbalance reports the sum of imbalances
discovered in sched domains with each call to sched_balance_rq(), which is
not very useful because lb_imbalance does not mention whether the imbalance
is due to load, utilization, nr_tasks or misfit_tasks. Remove this field
from /proc/schedstat.
Currently there is no field in /proc/schedstat to report different types
of imbalances. Introduce new fields in /proc/schedstat to report the
total imbalances in load, utilization, nr_tasks or misfit_tasks.
Added fields to /proc/schedstat:
- lb_imbalance_load: Total imbalance due to load.
- lb_imbalance_util: Total imbalance due to utilization.
- lb_imbalance_task: Total imbalance due to number of tasks.
- lb_imbalance_misfit: Total imbalance due to misfit tasks.
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://lore.kernel.org/r/20241220063224.17767-4-swapnil.sapkal@amd.com
migrate_degrade_locality() would return {1, 0, -1} respectively to
indicate that migration would degrade-locality, would improve
locality, would be ambivalent to locality improvements.
This patch improves readability by changing the return value to mean:
* Any positive value degrades locality
* 0 migration doesn't affect locality
* Any negative value improves locality
[Swapnil: Fixed comments around code and wrote commit log]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Not-yet-signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241220063224.17767-3-swapnil.sapkal@amd.com
In /proc/schedstat, lb_hot_gained reports the number hot tasks pulled
during load balance. This value is incremented in can_migrate_task()
if the task is migratable and hot. After incrementing the value,
load balancer can still decide not to migrate this task leading to wrong
accounting. Fix this by incrementing stats when hot tasks are detached.
This issue only exists in detach_tasks() where we can decide to not
migrate hot task even if it is migratable. However, in detach_one_task(),
we migrate it unconditionally.
[Swapnil: Handled the case where nr_failed_migrations_hot was not accounted properly and wrote commit log]
Fixes: d31980846f ("sched: Move up affinity check to mitigate useless redoing overhead")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: "Gautham R. Shenoy" <gautham.shenoy@amd.com>
Not-yet-signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241220063224.17767-2-swapnil.sapkal@amd.com
scheduler_tick() was renamed to sched_tick() in 86dd6c04ef
("sched/balancing: Rename scheduler_tick() => sched_tick()").
Update comments still referring to scheduler_tick.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241219085839.302378-1-bigeasy@linutronix.de
The released OCR and FRONTEND events utilized more bits on Lunar Lake
p-core. The corresponding mask in the extra_regs has to be extended to
unblock the extra bits.
Add a dedicated intel_lnc_extra_regs.
Fixes: a932aa0e86 ("perf/x86: Add Lunar Lake and Arrow Lake support")
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20241216160252.430858-1-kan.liang@linux.intel.com
