Alexandre observed a warning emitted from pci_msi_setup_msi_irqs() on a
RISCV platform which does not provide PCI/MSI support:
WARNING: CPU: 1 PID: 1 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x2c/0x32
__pci_enable_msix_range+0x30c/0x596
pci_msi_setup_msi_irqs+0x2c/0x32
pci_alloc_irq_vectors_affinity+0xb8/0xe2
RISCV uses hierarchical interrupt domains and correctly does not implement
the legacy fallback. The warning triggers from the legacy fallback stub.
That warning is bogus as the PCI/MSI layer knows whether a PCI/MSI parent
domain is associated with the device or not. There is a check for MSI-X,
which has a legacy assumption. But that legacy fallback assumption is only
valid when legacy support is enabled, but otherwise the check should simply
return -ENOTSUPP.
Loongarch tripped over the same problem and blindly enabled legacy support
without implementing the legacy fallbacks. There are weak implementations
which return an error, so the problem was papered over.
Correct pci_msi_domain_supports() to evaluate the legacy mode and add
the missing supported check into the MSI enable path to complete it.
Fixes: d2a463b297 ("PCI/MSI: Reject multi-MSI early")
Reported-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/87ed2a8ow5.ffs@tglx
Enable pinctrl and ethernet dwmac driver for the TH1520 SoC boards like
the BeagleV Ahead and the Sipeed LicheePi 4A.
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Drew Fustini <drew@pdp7.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
gpio-line-names is a generic property that can be supported by any
GPIO controller, so permit it through the binding.
It is permitted to have a variable number of GPIOs per node based
on brcm,gpio-bank-widths, so define an arbitrary maximum number of
items based on current users.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241212-dt-bcm2712-fixes-v3-3-44a7f3390331@raspberrypi.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Only GPIOs 4..7 have IRQ support on the TQMx86 variants currently handled
by the driver, but apart from that, changing directions works fine. The
default directions are left unchanged (0..3 output, 4..7 input) to match
the COM Express specification.
A tqmx86_gpio_set() variant without locking is introduced as a new
helper.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/d89da2f0e13fa6c8ec3f9076eed242133a1e3a63.1734001247.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
On currently supported variants of the TQMx86 GPIO controller, only
GPIOs 4-7 have IRQ support; in the interrupt status and config
registers, position 0 therefore corresponds to GPIO 4, position 1 to
GPIO 5, etc. This was made even more confusing by sometimes using the
term "offset" to refer to GPIO numbers (which are equavalent to hwirq
numbers), and sometimes to bit positions in the hardware registers.
With this change, the whole driver consistently uses hwirq numbers (==
GPIO numbers) when referring to the IRQs, and only the two pieces of
code that interact with the hardware registers (tqmx86_gpio_irq_config()
and tqmx86_gpio_irq_handler()) deal with bit positions. Space for hwirq
numbers 0-3 is reserved in the irq_type array, but remains unused for
existing (COM Express) TQMx86 variants; support for TQMx86 variants that
support IRQs on all GPIO lines will be added in the future.
No functional change intended.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/94b78f4a9500bb71e66c0f7d3b084fec5cfe42ca.1734001247.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Consistently use TQMX86_INT_* flags for irq_type values. The
TQMX86_GPII_CONFIG macro is used to convert from TQMX86_INT_TRIG_*
flags to GPII register values. Bit patterns for TQMX86_INT_* are chosen
to make this conversion as simple as possible.
No functional change intended.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/26c01bce589aedb794c19ea7ccd85f6143532e48.1734001247.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Remove legacy-of-mm-gpiochip.h header file. The above mentioned
file provides an OF API that's deprecated. There is no agnostic
alternatives to it and we have to open code the logic which was
hidden behind of_mm_gpiochip_add_data(). Note, most of the GPIO
drivers are using their own labeling schemas and resource retrieval
that only a few may gain of the code deduplication, so whenever
alternative is appear we can move drivers again to use that one.
As a side effect this change fixes a potential memory leak on
an error path, if of_mm_gpiochip_add_data() fails.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241118123254.620519-1-andriy.shevchenko@linux.intel.com
When USB-C monitor is connected directly to Intel Barlow Ridge host, it
goes into "redrive" mode that basically routes the DisplayPort signals
directly from the GPU to the USB-C monitor without any tunneling needed.
However, the host router must be powered on for this to work. Aaron
reported that there are a couple of cases where this will not work with
the current code:
- Booting with USB-C monitor plugged in.
- Plugging in USB-C monitor when the host router is in sleep state
(runtime suspended).
- Plugging in USB-C device while the system is in system sleep state.
In all these cases once the host router is runtime suspended the picture
on the connected USB-C display disappears too. This is certainly not
what the user expected.
For this reason improve the redrive mode handling to keep the host
router from runtime suspending when detect that any of the above cases
is happening.
Fixes: a75e0684ef ("thunderbolt: Keep the domain powered when USB4 port is in redrive mode")
Reported-by: Aaron Rainbolt <arainbolt@kfocus.org>
Closes: https://lore.kernel.org/linux-usb/20241009220118.70bfedd0@kf-ir16/
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
When the abs_native_port_num is set, the native_port_num reported
by the device may not be continuous and bigger than the num_lag_ports.
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241212221329.961628-2-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241215-sysfs-const-bin_attr-hwmon-v1-1-ea72a6a46c36@weissschuh.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This value was found on an ASRock B650 Steel Legend WiFi with an
NCT6686D chip.
Signed-off-by: Max Ammann <max@maxammann.org>
Link: https://lore.kernel.org/r/20241214102201.122851-1-max@maxammann.org
[groeck: htmldocs fix]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
If client send parallel smb2 negotiate request on same connection,
ksmbd_conn can be racy. smb2 negotiate handling that are not
performance-related can be serialized with conn lock.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since commit 0a77d947f5 ("ksmbd: check outstanding simultaneous SMB
operations"), ksmbd enforces a maximum number of simultaneous operations
for a connection. The problem is that reaching the limit causes ksmbd to
close the socket, and the client has no indication that it should have
slowed down.
This behaviour can be reproduced by setting "smb2 max credits = 128" (or
lower), and transferring a large file (25GB).
smbclient fails as below:
$ smbclient //192.168.1.254/testshare -U user%pass
smb: \> put file.bin
cli_push returned NT_STATUS_USER_SESSION_DELETED
putting file file.bin as \file.bin smb2cli_req_compound_submit:
Insufficient credits. 0 available, 1 needed
NT_STATUS_INTERNAL_ERROR closing remote file \file.bin
smb: \> smb2cli_req_compound_submit: Insufficient credits. 0 available,
1 needed
Windows clients fail with 0x8007003b (with smaller files even).
Fix this by delaying reading from the socket until there's room to
allocate a request. This effectively applies backpressure on the client,
so the transfer completes, albeit at a slower rate.
Fixes: 0a77d947f5 ("ksmbd: check outstanding simultaneous SMB operations")
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This changes the semantics of req_running to count all in-flight
requests on a given connection, rather than the number of elements
in the conn->request list. The latter is used only in smb2_cancel,
and the counter is not used
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
It is possible to reach the end of binder_transaction() without
having set lsmctx. As the variable value is checked there it needs
to be initialized.
Suggested-by: Kees Bakker <kees@ijzerbout.nl>
[PM: subj tweak to fit convention]
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
When evaluating extended permissions, ignore unknown permissions instead
of calling BUG(). This commit ensures that future permissions can be
added without interfering with older kernels.
Cc: stable@vger.kernel.org
Fixes: fa1aa143ac ("selinux: extended permissions for ioctls")
Signed-off-by: Thiébaud Weksteen <tweek@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add a new audit message type to capture nlmsg-related information. This
is similar to LSM_AUDIT_DATA_IOCTL_OP which was added for the other
SELinux extended permission (ioctl).
Adding a new type is preferred to adding to the existing
lsm_network_audit structure which contains irrelevant information for
the netlink sockets (i.e., dport, sport).
Signed-off-by: Thiébaud Weksteen <tweek@google.com>
[PM: change "nlnk-msgtype" to "nl-msgtype" as discussed]
Signed-off-by: Paul Moore <paul@paul-moore.com>
- Limit EFI zboot to GZIP and ZSTD before it comes in wider use
- Fix inconsistent error when looking up a non-existent file in efivarfs
with a name that does not adhere to the NAME-GUID format
- Drop some unused code
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZ17ajwAKCRAwbglWLn0t
XGkQAQCuIi5yPony5hJf6vrYXm7rnHN2NS9Wg7q3rKNR7TIGMQD/YHRdNJbJ4nO5
BrOVS4eVXvSzvWrYxB/W4EAMJ1uyLgs=
=LNFy
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Limit EFI zboot to GZIP and ZSTD before it comes in wider use
- Fix inconsistent error when looking up a non-existent file in
efivarfs with a name that does not adhere to the NAME-GUID format
- Drop some unused code
* tag 'efi-fixes-for-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/esrt: remove esre_attribute::store()
efivarfs: Fix error on non-existent file
efi/zboot: Limit compression options to GZIP and ZSTD
We have these fixes for hosts: PNX used the wrong unit for timeouts,
Nomadik was missing a sentinel, and RIIC was missing rounding up.
-----BEGIN PGP SIGNATURE-----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=WM5N
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"i2c host fixes: PNX used the wrong unit for timeouts, Nomadik was
missing a sentinel, and RIIC was missing rounding up"
* tag 'i2c-for-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: riic: Always round-up when calculating bus period
i2c: nomadik: Add missing sentinel to match table
i2c: pnx: Fix timeout in wait functions
The existing linked list based implementation of how ts tags are
assigned and managed is unsafe against concurrency and corner cases:
- element addition in tx processing can race against element removal
in ts queue completion,
- element removal in ts queue completion can race against element
removal in device close,
- if a large number of frames gets added to tx queue without ts queue
completions in between, elements with duplicate tag values can get
added.
Use a different implementation, based on per-port used tags bitmaps and
saved skb arrays.
Safety for addition in tx processing vs removal in ts completion is
provided by:
tag = find_first_zero_bit(...);
smp_mb();
<write rdev->ts_skb[tag]>
set_bit(...);
vs
<read rdev->ts_skb[tag]>
smp_mb();
clear_bit(...);
Safety for removal in ts completion vs removal in device close is
provided by using atomic read-and-clear for rdev->ts_skb[tag]:
ts_skb = xchg(&rdev->ts_skb[tag], NULL);
if (ts_skb)
<handle it>
Fixes: 33f5d733b5 ("net: renesas: rswitch: Improve TX timestamp accuracy")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://patch.msgid.link/20241212062558.436455-1-nikita.yoush@cogentembedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The calculation determining whether to use three- or four-level paging
didn't account for KMSAN modules metadata. Include this metadata in the
virtual memory size calculation to ensure correct paging mode selection
and avoiding potentially unnecessary physical memory size limitations.
Fixes: 65ca73f9fb ("s390/mm: define KMSAN metadata for vmalloc and modules")
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Some calls into ionic_get_module_eeprom() don't use a single
full buffer size, but instead multiple calls with an offset.
Teach our driver to use the offset correctly so we can
respond appropriately to the caller.
Fixes: 4d03e00a21 ("ionic: Add initial ethtool support")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-4-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are some FW error handling paths that can cause us to
try to destroy the workqueue more than once, so let's be sure
we're checking for that.
The case where this popped up was in an AER event where the
handlers got called in such a way that ionic_reset_prepare()
and thus ionic_dev_teardown() got called twice in a row.
The second time through the workqueue was already destroyed,
and destroy_workqueue() choked on the bad wq pointer.
We didn't hit this in AER handler testing before because at
that time we weren't using a private workqueue. Later we
replaced the use of the system workqueue with our own private
workqueue but hadn't rerun the AER handler testing since then.
Fixes: 9e25450da7 ("ionic: add private workqueue per-device")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If register_netdev() fails, then the driver leaks the netdev notifier.
Fix this by calling ionic_lif_unregister() on register_netdev()
failure. This will also call ionic_lif_unregister_phc() if it has
already been registered.
Fixes: 30b87ab4c0 ("ionic: remove lif list concept")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: pm: userspace: misc cleanups
These cleanups lead the way to the unification of the path-manager
interfaces, and allow future extensions. The following patches are not
linked to each others, but are all related to the userspace
path-manager.
- Patch 1: add a new helper to reduce duplicated code.
- Patch 2: add a macro to iterate over the address list, clearer.
- Patch 3: reduce duplicated code to get the corresponding MPTCP socket.
- Patch 4: move userspace PM specific code out of the in-kernel one.
- Patch 5: pass an entry instead of a list with always one entry.
- Patch 6: uniform struct type used for the local addresses.
- Patch 7: simplify error handling.
====================
Link: https://patch.msgid.link/20241213-net-next-mptcp-pm-misc-cleanup-v1-0-ddb6d00109a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Upon successful return, mptcp_pm_parse_addr() returns 0. There is no need
to set "err = 0" after this. So after mptcp_nl_find_ssk() returns, just
need to set "err = -ESRCH", then release and free msk socket if it returns
NULL.
Also, no need to define the variable "subflow" in subflow_destroy(), use
mptcp_subflow_ctx(ssk) directly.
This patch doesn't change the behaviour of the code, just refactoring.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241213-net-next-mptcp-pm-misc-cleanup-v1-7-ddb6d00109a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Generally, in the path manager interfaces, the local address is defined as
an mptcp_pm_addr_entry type address, while the remote address is defined as
an mptcp_addr_info type one:
(struct mptcp_pm_addr_entry *local, struct mptcp_addr_info *remote)
But subflow_destroy() interface uses two mptcp_addr_info type parameters.
This patch changes the first one to mptcp_pm_addr_entry type and use helper
mptcp_pm_parse_entry() to parse it instead of using mptcp_pm_parse_addr().
This patch doesn't change the behaviour of the code, just refactoring.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241213-net-next-mptcp-pm-misc-cleanup-v1-6-ddb6d00109a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_pm_remove_addrs() actually only deletes one address, which does
not match its name. This patch renames it to mptcp_pm_remove_addr_entry()
and changes the parameter "rm_list" to "entry".
With the help of mptcp_pm_remove_addr_entry(), it's no longer necessary to
move the entry to be deleted to free_list and then traverse the list to
delete the entry, which is not allowed in BPF. The entry can be directly
deleted through list_del_rcu() and sock_kfree_s() now.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241213-net-next-mptcp-pm-misc-cleanup-v1-5-ddb6d00109a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since mptcp_pm_remove_addrs() is only called from the userspace PM, this
patch moves it into pm_userspace.c.
For this, lookup_subflow_by_saddr() and remove_anno_list_by_saddr()
helpers need to be exported in protocol.h. Also add "mptcp_" prefix for
these helpers.
Here, mptcp_pm_remove_addrs() is not changed to a static function because
it will be used in BPF Path Manager.
This patch doesn't change the behaviour of the code, just refactoring.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241213-net-next-mptcp-pm-misc-cleanup-v1-4-ddb6d00109a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each userspace pm netlink function uses nla_get_u32() to get the msk
token value, then pass it to mptcp_token_get_sock() to get the msk.
Finally check whether userspace PM is selected on this msk. It makes
sense to wrap them into a helper, named mptcp_userspace_pm_get_sock(),
to do this.
This patch doesn't change the behaviour of the code, just refactoring.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241213-net-next-mptcp-pm-misc-cleanup-v1-3-ddb6d00109a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to mptcp_for_each_subflow() macro, this patch adds a new macro
mptcp_for_each_userspace_pm_addr() for userspace PM to iterate over the
address entries on the local address list userspace_pm_local_addr_list
of the mptcp socket.
This patch doesn't change the behaviour of the code, just refactoring.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241213-net-next-mptcp-pm-misc-cleanup-v1-2-ddb6d00109a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Like __lookup_addr() helper in pm_netlink.c, a new helper
mptcp_userspace_pm_lookup_addr() is also defined in pm_userspace.c.
It looks up the corresponding mptcp_pm_addr_entry address in
userspace_pm_local_addr_list through the passed "addr" parameter
and returns the found address entry.
This helper can be used in mptcp_userspace_pm_delete_local_addr(),
mptcp_userspace_pm_set_flags(), mptcp_userspace_pm_get_local_id()
and mptcp_userspace_pm_is_backup() to simplify the code.
Please note that with this change now list_for_each_entry() is used in
mptcp_userspace_pm_append_new_local_addr(), not list_for_each_entry_safe(),
but that's OK to do so because mptcp_userspace_pm_lookup_addr() only
returns an entry from the list, the list hasn't been modified here.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241213-net-next-mptcp-pm-misc-cleanup-v1-1-ddb6d00109a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simplify framer_provider_simple_of_xlate() implementation by API
class_find_device_by_of_node().
Also correct comments to mark its parameter @dev as unused instead of
@args in passing.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241213-net_fix-v2-1-6d06130d630f@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@@ constant C; @@
- msecs_to_jiffies(C * 1000)
+ secs_to_jiffies(C)
@@ constant C; @@
- msecs_to_jiffies(C * MSEC_PER_SEC)
+ secs_to_jiffies(C)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Link: https://patch.msgid.link/20241212-netdev-converge-secs-to-jiffies-v4-1-6dac97a6d6ab@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add uint, sint to the list of attr types in the netlink-raw schema. This
fixes the rt_link spec which had a uint attr added in commit
f858cc9eed ("net: add IFLA_MAX_PACING_OFFLOAD_HORIZON device attribute")
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20241213110827.32250-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When DCB is disabled, the pfc_en struct member cannot be accessed:
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c: In function 'otx2_is_pfc_enabled':
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c:22:48: error: 'struct otx2_nic' has no member named 'pfc_en'
22 | return IS_ENABLED(CONFIG_DCB) && !!pfvf->pfc_en;
| ^~
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c: In function 'otx2_nix_config_bp':
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c:1755:33: error: 'IEEE_8021QAZ_MAX_TCS' undeclared (first use in this function)
1755 | req->chan_cnt = IEEE_8021QAZ_MAX_TCS;
| ^~~~~~~~~~~~~~~~~~~~
Move the member out of the #ifdef block to avoid putting back another
check in the source file and add the missing include file unconditionally.
Fixes: a7ef63dbd5 ("octeontx2-af: Disable backpressure between CPT and NIX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241213083228.2645757-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit aa58bec064 ("net: ethernet: oa_tc6: implement register
write operation") introduced a library that implements the OPEN Alliance
TC6 10BASE-T1x MAC-PHY Serial Interface protocol for supporting
10BASE-T1x MAC-PHYs.
There is no need to ask the user about enabling this library, as all
drivers that use it select the OA_TC6 symbol. Hence make the symbol
invisible, unless when compile-testing.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/3b600550745af10ab7d7c3526353931c1d39f641.1733994552.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It seems that phylink does not support driving PHYs in SFP modules using
the Generic PHY or Generic Clause 45 PHY driver. I've come to this
conclusion after analyzing these facts:
- sfp_sm_probe_phy(), who is our caller here, first calls
phy_device_register() and then sfp_add_phy() -> ... ->
phylink_sfp_connect_phy().
- phydev->supported is populated by phy_probe()
- phy_probe() is usually called synchronously from phy_device_register()
via phy_bus_match(), if a precise device driver is found for the PHY.
In that case, phydev->supported has a good chance of being set to a
non-zero mask.
- There is an exceptional case for the PHYs for which phy_bus_match()
didn't find a driver. Those devices sit for a while without a driver,
then phy_attach_direct() force-binds the genphy_c45_driver or
genphy_driver to them. Again, this triggers phy_probe() and renders
a good chance of phydev->supported being populated, assuming
compatibility with genphy_read_abilities() or
genphy_c45_pma_read_abilities().
- phylink_sfp_config_phy() does not support the exceptional case of
retrieving phydev->supported from the Generic PHY driver, due to its
code flow. It expects the phydev->supported mask to already be
non-empty, because it first calls phylink_validate() on it, and only
calls phylink_attach_phy() if that succeeds. Thus, phylink_attach_phy()
-> phy_attach_direct() has no chance of running.
It is not my wish to change the state of affairs by altering the code
flow, but merely to document the limitation rather than have the current
unspecific error:
[ 61.800079] mv88e6085 d0032004.mdio-mii:12 sfp: validation with support 00,00000000,00000000,00000000 failed: -EINVAL
[ 61.820743] sfp sfp: sfp_add_phy failed: -EINVAL
On the premise that an empty phydev->supported is going to make
phylink_validate() fail anyway, and that this is caused by a missing PHY
driver, it would be more informative to single out that case, undercut
the entire phylink_sfp_config_phy() call, including phylink_validate(),
and print a more specific message for this common gotcha:
[ 37.076403] mv88e6085 d0032004.mdio-mii:12 sfp: PHY i2c:sfp:16 (id 0x01410cc2) has no driver loaded
[ 37.089157] mv88e6085 d0032004.mdio-mii:12 sfp: Drivers which handle known common cases: CONFIG_BCM84881_PHY, CONFIG_MARVELL_PHY
[ 37.108047] sfp sfp: sfp_add_phy failed: -EINVAL
Link: https://lore.kernel.org/netdev/20241113144229.3ff4bgsalvj7spb7@skbuf/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20241212140834.278894-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the correct attribute space for sub-message key lookup in nested
attributes when adding attributes. This fixes rt_link where the "kind"
key and "data" sub-message are nested attributes in "linkinfo".
For example:
./tools/net/ynl/cli.py \
--create \
--spec Documentation/netlink/specs/rt_link.yaml \
--do newlink \
--json '{"link": 99,
"linkinfo": { "kind": "vlan", "data": {"id": 4 } }
}'
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Fixes: ab463c4342 ("tools/net/ynl: Add support for encoding sub-messages")
Link: https://patch.msgid.link/20241213130711.40267-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
adding a route metric greater than 0x7fff_ffff leads to an
unintended wrap when printing the underlying u32 as an
unsigned int (`%d`) thus incorrectly rendering the metric
as negative. Formatting using `%u` corrects the issue.
Signed-off-by: Maximilian Güntner <code@mguentner.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241212161911.51598-1-code@mguentner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
