Revise adc128d818 adc mode on Spider Board according to schematic.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://patch.msgid.link/20240920085007.1076174-1-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add the `i2c-mux-idle-disconnect` property to all i2c-mux nodes to
ensure proper behavior when switching between multiple I2C buses.
This avoids potential confusion caused by device addresses appearing on
multiple buses when they are not actively selected.
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Link: https://patch.msgid.link/20240920-catalina-i2c-mux-fix-2-v1-1-66cce7c54188@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
We use CPLD to emulate gpio pca9506 I/O expander on each server
boards.
Therefore, add pca9506 to probe driver for the CPLD I/O expander.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://patch.msgid.link/20240910054751.2943217-3-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Revise to use adm1281 for HSC according to the hardware design change.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://patch.msgid.link/20240910054751.2943217-2-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Enable interrupt setting and add GPIO line name for pca9555 for the I/O
expanders on Medusa board.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://patch.msgid.link/20240918101742.1346788-1-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Blueridge LED names to include the "led-" prefix as is proper.
Rainier should match for ease of application design. In addition,
the gpio line name ought to match.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/20240917162100.1386130-1-eajames@linux.ibm.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Change eeprom on Medusa Board to AT24C128 according to hardware change.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://patch.msgid.link/20240910084109.3585923-1-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Remove two temperature sensors on Medusa Board according to hardware
change.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://patch.msgid.link/20240910085701.3595248-1-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add mailbox device tree node. This work is based on the vendor kernel [1].
Link: https://github.com/revyos/thead-kernel.git [1]
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Reviewed-by: Drew Fustini <dfustini@tenstorrent.com>
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
We intend to remove the cxlflash driver in an upcoming release. It is
already marked as Obsolete in MAINTAINERS.
The cxlflash driver has received minimal maintenance for some time, and
the CAPI Flash hardware that uses it is no longer commercially available.
Add a warning message on probe and change Kconfig to label the driver as
deprecated and not build the driver by default.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241210054055.144813-3-ajd@linux.ibm.com
The cxl driver is no longer actively maintained and we intend to remove it
in a future kernel release.
cxl has received minimal maintenance for several years, and is not
supported on the Power10 processor. We aren't aware of any users who are
likely to be using recent kernels.
Change its MAINTAINERS status to obsolete, update the sysfs ABI
documentation accordingly, add a warning message on device probe, change
the Kconfig options to label it as deprecated, and don't build it by
default.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241210054055.144813-2-ajd@linux.ibm.com
Mina Almasry says:
====================
devmem TCP fixes
Couple unrelated devmem TCP fixes bundled in a series for some
convenience.
- fix naming and provide page_pool_alloc_netmem for fragged
netmem.
- fix issues with dma-buf dma addresses being potentially
passed to dma_sync_for_* helpers.
====================
Link: https://patch.msgid.link/20241211212033.1684197-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dmabuf dma-addresses should not be dma_sync'd for CPU/device. Typically
its the driver responsibility to dma_sync for CPU, but the driver should
not dma_sync for CPU if the netmem is actually coming from a dmabuf
memory provider.
The page_pool already exposes a helper for dma_sync_for_cpu:
page_pool_dma_sync_for_cpu. Upgrade this existing helper to handle
netmem, and have it skip dma_sync if the memory is from a dmabuf memory
provider. Drivers should migrate to using this helper when adding
support for netmem.
Also minimize the impact on the dma syncing performance for pages. Special
case the dma-sync path for pages to not go through the overhead checks
for dma-syncing and conversion to netmem.
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20241211212033.1684197-5-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the `dma_map` and `dma_sync` checks to `page_pool_init` to make
them generic. Set dma_sync to false for devmem memory provider because
the dma_sync APIs should not be used for dma_buf backed devmem memory
provider.
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20241211212033.1684197-4-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create page_pool_alloc_netmem to be the mirror of page_pool_alloc.
This enables drivers that want currently use page_pool_alloc to
transition to netmem by converting the call sites to
page_pool_alloc_netmem.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241211212033.1684197-3-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
page_pool_alloc_netmem (without an s) was the mirror of
page_pool_alloc_pages (with an s), which was confusing.
Rename to page_pool_alloc_netmems so it's the mirror of
page_pool_alloc_pages.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241211212033.1684197-2-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexander Lobakin says:
====================
xdp: a fistful of generic changes pt. II (part)
XDP for idpf is currently 5.5 chapters:
* convert Rx to libeth;
* convert Tx and stats to libeth;
* generic XDP and XSk code changes;
* generic XDP and XSk code additions (you are here);
* actual XDP for idpf via new libeth_xdp;
* XSk for idpf (via ^).
Part III.2.1 does the following:
* allows mixing pages from several Page Pools within one XDP frame;
* optimizes &xdp_frame structure and removes no-more-used field;
Everything is prereq for libeth_xdp, but will be useful standalone
as well: faster xdp_return_frame_bulk() and xdp_frame fields access.
====================
Link: https://patch.msgid.link/20241211172649.761483-1-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_frag_dma_map(dev, frag, 0, skb_frag_size(frag), DMA_TO_DEVICE)
is repeated across dozens of drivers and really wants a shorthand.
Add a macro which will count args and handle all possible number
from 2 to 5. Semantics:
skb_frag_dma_map(dev, frag) ->
__skb_frag_dma_map(dev, frag, 0, skb_frag_size(frag), DMA_TO_DEVICE)
skb_frag_dma_map(dev, frag, offset) ->
__skb_frag_dma_map(dev, frag, offset, skb_frag_size(frag) - offset,
DMA_TO_DEVICE)
skb_frag_dma_map(dev, frag, offset, size) ->
__skb_frag_dma_map(dev, frag, offset, size, DMA_TO_DEVICE)
skb_frag_dma_map(dev, frag, offset, size, dir) ->
__skb_frag_dma_map(dev, frag, offset, size, dir)
No object code size changes for the existing callers. Users passing
less arguments also won't have bigger size comparing to the full
equivalent call.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-11-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, __xdp_return() takes pointer to the virtual memory to free
a buffer. Apart from that this sometimes provokes redundant
data <--> page conversions, taking data pointer effectively prevents
lots of XDP code to support non-page-backed buffers, as there's no
mapping for the non-host memory (data is always NULL).
Just convert it to always take netmem reference. For
xdp_return_{buff,frame*}(), this chops off one page_address() per each
frag and adds one virt_to_netmem() (same as virt_to_page()) per header
buffer. For __xdp_return() itself, it removes one virt_to_page() for
MEM_TYPE_PAGE_POOL and another one for MEM_TYPE_PAGE_ORDER0, adding
one page_address() for [not really common nowadays]
MEM_TYPE_PAGE_SHARED, but the main effect is that the abovementioned
functions won't die or memleak anymore if the frame has non-host memory
attached and will correctly free those.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-4-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initially, xdp_frame::mem.id was used to search for the corresponding
&page_pool to return the page correctly.
However, after that struct page was extended to have a direct pointer
to its PP (netmem has it as well), further keeping of this field makes
no sense. xdp_return_frame_bulk() still used it to do a lookup, and
this leftover is now removed.
Remove xdp_frame::mem and replace it with ::mem_type, as only memory
type still matters and we need to know it to be able to free the frame
correctly.
As a cute side effect, we can now make every scalar field in &xdp_frame
of 4 byte width, speeding up accesses to them.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-3-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The main reason for this change was to allow mixing pages from different
&page_pools within one &xdp_buff/&xdp_frame. Why not? With stuff like
devmem and io_uring zerocopy Rx, it's required to have separate PPs for
header buffers and payload buffers.
Adjust xdp_return_frame_bulk() and page_pool_put_netmem_bulk(), so that
they won't be tied to a particular pool. Let the latter create a
separate bulk of pages which's PP is different from the first netmem of
the bulk and process it after the main loop.
This greatly optimizes xdp_return_frame_bulk(): no more hashtable
lookups and forced flushes on PP mismatch. Also make
xdp_flush_frame_bulk() inline, as it's just one if + function call + one
u32 read, not worth extending the call ladder.
Co-developed-by: Toke Høiland-Jørgensen <toke@redhat.com> # iterative
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org> # while (count)
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-2-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Receive tools/sched_ext updates form https://github.com/sched-ext/scx to
sync userspace bits:
- scx_bpf_dump_header() added which can be used to print out basic scheduler
info on dump.
- BPF possible/online CPU iterators added.
- CO-RE enums added. The enums are autogenerated from vmlinux.h. Include the
generated artifacts in tools/sched_ext to keep the Makefile simpler.
- Other misc changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Take advantage of the multigrain timestamp APIs to ensure that nobody
can sneak in and write things to a file between starting a file update
operation and committing the results. This should have been part of the
multigrain timestamp merge, but I forgot to fling it at jlayton when he
resubmitted the patchset due to developer bandwidth problems.
Cc: <stable@vger.kernel.org> # v6.13-rc1
Fixes: 4e40eff0b5 ("fs: add infrastructure for multigrain timestamps")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
V4 symlink blocks didn't have headers, so return early if this is a V4
filesystem.
Cc: <stable@vger.kernel.org> # v5.1
Fixes: 39708c20ab ("xfs: miscellaneous verifier magic value fixups")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The logic to check that the region past the end of the superblock is all
zeroes is wrong -- we don't want to check only the bytes past the end of
the maximally sized ondisk superblock structure as currently defined in
xfs_format.h; we want to check the bytes beyond the end of the ondisk as
defined by the feature bits.
Port the superblock size logic from xfs_repair and then put it to use in
xfs_scrub.
Cc: <stable@vger.kernel.org> # v4.15
Fixes: 21fb4cb198 ("xfs: scrub the secondary superblocks")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The checks that were added to the superblock scrubber for metadata
directories aren't quite right -- the old inode pointers are now defined
to be zeroes until someone else reuses them. Also consolidate the new
metadir field checks to one place; they were inexplicably scattered
around.
Cc: <stable@vger.kernel.org> # v6.13-rc1
Fixes: 28d756d4d5 ("xfs: update sb field checks when metadir is turned on")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If the /quotas dirent points to an inode but the inode isn't loadable
(and hence mkdir returns -EEXIST), don't crash, just bail out.
Cc: <stable@vger.kernel.org> # v6.13-rc1
Fixes: e80fbe1ad8 ("xfs: use metadir for quota inodes")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Only directories or regular files are allowed in the metadata directory
tree. Don't move the repair tempfile to the metadir namespace if this
is not true; this will cause the inode verifiers to trip.
xrep_tempfile_adjust_directory_tree opportunistically moves sc->tempip
from the regular directory tree to the metadata directory tree if sc->ip
is part of the metadata directory tree. However, the scrub setup
functions grab sc->ip and create sc->tempip before we actually get
around to checking if the file mode is the right type for the scrubber.
IOWs, you can invoke the symlink scrubber with the file handle of a
subdirectory in the metadir. xrep_setup_symlink will create a temporary
symlink file, xrep_tempfile_adjust_directory_tree will foolishly try to
set the METADATA flag on the temp symlink, which trips the inode
verifier in the inode item precommit, which shuts down the filesystem
when expensive checks are turned on. If they're /not/ turned on, then
xchk_symlink will return ENOENT when it sees that it's been passed a
symlink, but the invalid inode could still get flushed to disk. We
don't want that.
Cc: <stable@vger.kernel.org> # v6.13-rc1
Fixes: 9dc31acb01 ("xfs: move repair temporary files to the metadata directory tree")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
For a sparse inodes filesystem, mkfs.xfs computes the values of
sb_spino_align and sb_inoalignmt with the following code:
int cluster_size = XFS_INODE_BIG_CLUSTER_SIZE;
if (cfg->sb_feat.crcs_enabled)
cluster_size *= cfg->inodesize / XFS_DINODE_MIN_SIZE;
sbp->sb_spino_align = cluster_size >> cfg->blocklog;
sbp->sb_inoalignmt = XFS_INODES_PER_CHUNK *
cfg->inodesize >> cfg->blocklog;
On a V5 filesystem with 64k fsblocks and 512 byte inodes, this results
in cluster_size = 8192 * (512 / 256) = 16384. As a result,
sb_spino_align and sb_inoalignmt are both set to zero. Unfortunately,
this trips the new sb_spino_align check that was just added to
xfs_validate_sb_common, and the mkfs fails:
# mkfs.xfs -f -b size=64k, /dev/sda
meta-data=/dev/sda isize=512 agcount=4, agsize=81136 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=1
= reflink=1 bigtime=1 inobtcount=1 nrext64=1
= exchange=0 metadir=0
data = bsize=65536 blocks=324544, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=65536 ascii-ci=0, ftype=1, parent=0
log =internal log bsize=65536 blocks=5006, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=65536 blocks=0, rtextents=0
= rgcount=0 rgsize=0 extents
Discarding blocks...Sparse inode alignment (0) is invalid.
Metadata corruption detected at 0x560ac5a80bbe, xfs_sb block 0x0/0x200
libxfs_bwrite: write verifier failed on xfs_sb bno 0x0/0x1
mkfs.xfs: Releasing dirty buffer to free list!
found dirty buffer (bulk) on free list!
Sparse inode alignment (0) is invalid.
Metadata corruption detected at 0x560ac5a80bbe, xfs_sb block 0x0/0x200
libxfs_bwrite: write verifier failed on xfs_sb bno 0x0/0x1
mkfs.xfs: writing AG headers failed, err=22
Prior to commit 59e43f5479 this all worked fine, even if "sparse"
inodes are somewhat meaningless when everything fits in a single
fsblock. Adjust the checks to handle existing filesystems.
Cc: <stable@vger.kernel.org> # v6.13-rc1
Fixes: 59e43f5479 ("xfs: sb_spino_align is not verified")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we've converted the dquot logging machinery to attach the dquot
buffer to the li_buf pointer so that the AIL dqflush doesn't have to
allocate or read buffers in a reclaim path, do the same for the
quotacheck code so that the reclaim shrinker dqflush call doesn't have
to do that either.
Cc: <stable@vger.kernel.org> # v6.12
Fixes: 903edea6c5 ("mm: warn about illegal __GFP_NOFAIL usage in a more appropriate location and manner")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Ever since 6.12-rc1, I've observed a pile of warnings from the kernel
when running fstests with quotas enabled:
WARNING: CPU: 1 PID: 458580 at mm/page_alloc.c:4221 __alloc_pages_noprof+0xc9c/0xf18
CPU: 1 UID: 0 PID: 458580 Comm: xfsaild/sda3 Tainted: G W 6.12.0-rc6-djwa #rc6 6ee3e0e531f6457e2d26aa008a3b65ff184b377c
<snip>
Call trace:
__alloc_pages_noprof+0xc9c/0xf18
alloc_pages_mpol_noprof+0x94/0x240
alloc_pages_noprof+0x68/0xf8
new_slab+0x3e0/0x568
___slab_alloc+0x5a0/0xb88
__slab_alloc.constprop.0+0x7c/0xf8
__kmalloc_noprof+0x404/0x4d0
xfs_buf_get_map+0x594/0xde0 [xfs 384cb02810558b4c490343c164e9407332118f88]
xfs_buf_read_map+0x64/0x2e0 [xfs 384cb02810558b4c490343c164e9407332118f88]
xfs_trans_read_buf_map+0x1dc/0x518 [xfs 384cb02810558b4c490343c164e9407332118f88]
xfs_qm_dqflush+0xac/0x468 [xfs 384cb02810558b4c490343c164e9407332118f88]
xfs_qm_dquot_logitem_push+0xe4/0x148 [xfs 384cb02810558b4c490343c164e9407332118f88]
xfsaild+0x3f4/0xde8 [xfs 384cb02810558b4c490343c164e9407332118f88]
kthread+0x110/0x128
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
This corresponds to the line:
WARN_ON_ONCE(current->flags & PF_MEMALLOC);
within the NOFAIL checks. What's happening here is that the XFS AIL is
trying to write a disk quota update back into the filesystem, but for
that it needs to read the ondisk buffer for the dquot. The buffer is
not in memory anymore, probably because it was evicted. Regardless, the
buffer cache tries to allocate a new buffer, but those allocations are
NOFAIL. The AIL thread has marked itself PF_MEMALLOC (aka noreclaim)
since commit 43ff2122e6 ("xfs: on-stack delayed write buffer lists")
presumably because reclaim can push on XFS to push on the AIL.
An easy way to fix this probably would have been to drop the NOFAIL flag
from the xfs_buf allocation and open code a retry loop, but then there's
still the problem that for bs>ps filesystems, the buffer itself could
require up to 64k worth of pages.
Inode items had similar behavior (multi-page cluster buffers that we
don't want to allocate in the AIL) which we solved by making transaction
precommit attach the inode cluster buffers to the dirty log item. Let's
solve the dquot problem in the same way.
So: Make a real precommit handler to read the dquot buffer and attach it
to the log item; pass it to dqflush in the push method; and have the
iodone function detach the buffer once we've flushed everything. Add a
state flag to the log item to track when a thread has entered the
precommit -> push mechanism to skip the detaching if it turns out that
the dquot is very busy, as we don't hold the dquot lock between log item
commit and AIL push).
Reading and attaching the dquot buffer in the precommit hook is inspired
by the work done for inode cluster buffers some time ago.
Cc: <stable@vger.kernel.org> # v6.12
Fixes: 903edea6c5 ("mm: warn about illegal __GFP_NOFAIL usage in a more appropriate location and manner")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Clean up these functions a little bit before we move on to the real
modifications, and make the variable naming consistent for dquot log
items.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The first step towards holding the dquot buffer in the li_buf instead of
reading it in the AIL is to separate the part that reads the buffer from
the actual flush code. There should be no functional changes.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Quota counter updates are tracked via incore objects which hang off the
xfs_trans object. These changes are then turned into dirty log items in
xfs_trans_apply_dquot_deltas just prior to commiting the log items to
the CIL.
However, updating the incore deltas do not cause XFS_TRANS_DIRTY to be
set on the transaction. In other words, a pure quota counter update
will be silently discarded if there are no other dirty log items
attached to the transaction.
This is currently not the case anywhere in the filesystem because quota
updates always dirty at least one other metadata item, but a subsequent
bug fix will add dquot log item precommits, so we actually need a dirty
dquot log item prior to xfs_trans_run_precommits. Also let's not leave
a logic bomb.
Cc: <stable@vger.kernel.org> # v2.6.35
Fixes: 0924378a68 ("xfs: split out iclog writing from xfs_trans_commit()")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Superblock counter updates are tracked via per-transaction counters in
the xfs_trans object. These changes are then turned into dirty log
items in xfs_trans_apply_sb_deltas just prior to commiting the log items
to the CIL.
However, updating the per-transaction counter deltas do not cause
XFS_TRANS_DIRTY to be set on the transaction. In other words, a pure sb
counter update will be silently discarded if there are no other dirty
log items attached to the transaction.
This is currently not the case anywhere in the filesystem because sb
counter updates always dirty at least one other metadata item, but let's
not leave a logic bomb.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Currently, __xfs_trans_commit calls xfs_defer_finish_noroll, which calls
__xfs_trans_commit again on the same transaction. In other words,
there's a nested function call (albeit with slightly different
arguments) that has caused minor amounts of confusion in the past.
There's no reason to keep this around, since there's only one place
where we actually want the xfs_defer_finish_noroll, and that is in the
top level xfs_trans_commit call.
This also reduces stack usage a little bit.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Committing a transaction tx0 with a defer ops chain of (A, B, C)
creates a chain of transactions that looks like this:
tx0 -> txA -> txB -> txC
Prior to commit cb04211748, __xfs_trans_commit would run precommits
on tx0, then call xfs_defer_finish_noroll to convert A-C to tx[A-C].
Unfortunately, after the finish_noroll loop we forgot to run precommits
on txC. That was fixed by adding the second precommit call.
Unfortunately, none of us remembered that xfs_defer_finish_noroll
calls __xfs_trans_commit a second time to commit tx0 before finishing
work A in txA and committing that. In other words, we run precommits
twice on tx0:
xfs_trans_commit(tx0)
__xfs_trans_commit(tx0, false)
xfs_trans_run_precommits(tx0)
xfs_defer_finish_noroll(tx0)
xfs_trans_roll(tx0)
txA = xfs_trans_dup(tx0)
__xfs_trans_commit(tx0, true)
xfs_trans_run_precommits(tx0)
This currently isn't an issue because the inode item precommit is
idempotent; the iunlink item precommit deletes itself so it can't be
called again; and the buffer/dquot item precommits only check the incore
objects for corruption. However, it doesn't make sense to run
precommits twice.
Fix this situation by only running precommits after finish_noroll.
Cc: <stable@vger.kernel.org> # v6.4
Fixes: cb04211748 ("xfs: defered work could create precommits")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Debugging a filesystem patch with generic/475 caused the system to hang
after observing the following sequences in dmesg:
XFS (dm-0): metadata I/O error in "xfs_imap_to_bp+0x61/0xe0 [xfs]" at daddr 0x491520 len 32 error 5
XFS (dm-0): metadata I/O error in "xfs_btree_read_buf_block+0xba/0x160 [xfs]" at daddr 0x3445608 len 8 error 5
XFS (dm-0): metadata I/O error in "xfs_imap_to_bp+0x61/0xe0 [xfs]" at daddr 0x138e1c0 len 32 error 5
XFS (dm-0): log I/O error -5
XFS (dm-0): Metadata I/O Error (0x1) detected at xfs_trans_read_buf_map+0x1ea/0x4b0 [xfs] (fs/xfs/xfs_trans_buf.c:311). Shutting down filesystem.
XFS (dm-0): Please unmount the filesystem and rectify the problem(s)
XFS (dm-0): Internal error dqp->q_ino.reserved < dqp->q_ino.count at line 869 of file fs/xfs/xfs_trans_dquot.c. Caller xfs_trans_dqresv+0x236/0x440 [xfs]
XFS (dm-0): Corruption detected. Unmount and run xfs_repair
XFS (dm-0): Unmounting Filesystem be6bcbcc-9921-4deb-8d16-7cc94e335fa7
The system is stuck in unmount trying to lock a couple of inodes so that
they can be purged. The dquot corruption notice above is a clue to what
happened -- a link() call tried to set up a transaction to link a child
into a directory. Quota reservation for the transaction failed after IO
errors shut down the filesystem, but then we forgot to unlock the inodes
on our way out. Fix that.
Cc: <stable@vger.kernel.org> # v6.10
Fixes: bd5562111d ("xfs: Hold inode locks in xfs_trans_alloc_dir")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fix a minor mistakes in the scrub tracepoints that can manifest when
inode-rooted btrees are enabled. The existing code worked fine for bmap
btrees, but we should tighten the code up to be less sloppy.
Cc: <stable@vger.kernel.org> # v5.7
Fixes: 92219c292a ("xfs: convert btree cursor inode-private member names")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In commit 2c813ad66a, I partially fixed a bug wherein xfs_btree_insrec
would erroneously try to update the parent's key for a block that had
been split if we decided to insert the new record into the new block.
The solution was to detect this situation and update the in-core key
value that we pass up to the caller so that the caller will (eventually)
add the new block to the parent level of the tree with the correct key.
However, I missed a subtlety about the way inode-rooted btrees work. If
the full block was a maximally sized inode root block, we'll solve that
fullness by moving the root block's records to a new block, resizing the
root block, and updating the root to point to the new block. We don't
pass a pointer to the new block to the caller because that work has
already been done. The new record will /always/ land in the new block,
so in this case we need to use xfs_btree_update_keys to update the keys.
This bug can theoretically manifest itself in the very rare case that we
split a bmbt root block and the new record lands in the very first slot
of the new block, though I've never managed to trigger it in practice.
However, it is very easy to reproduce by running generic/522 with the
realtime rmapbt patchset if rtinherit=1.
Cc: <stable@vger.kernel.org> # v4.8
Fixes: 2c813ad66a ("xfs: support btrees with overlapping intervals for keys")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
smatch reported that we screwed up the error cleanup in this function.
Fix it.
Cc: <stable@vger.kernel.org> # v6.13-rc1
Fixes: ae897e0bed ("xfs: support creating per-RTG files in growfs")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
