The "regulator-compatible" property has been deprecated since 2012 in
commit 13511def87 ("regulator: deprecate regulator-compatible DT
property"), which is so old it's not even mentioned in the converted
regulator bindings YAML file. It is also not listed in the MT6397
regulator bindings. Having them present produces a whole bunch of
validation errors:
Unevaluated properties are not allowed ('regulator-compatible' was unexpected)
Drop the "regulator-compatible" property from the board dts. The
property values are the same as the node name, so everything should
continue to work.
Fixes: 689b937bed ("arm64: dts: mediatek: add mt8173 elm and hana board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241211052427.4178367-4-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The "regulator-compatible" property has been deprecated since 2012 in
commit 13511def87 ("regulator: deprecate regulator-compatible DT
property"), which is so old it's not even mentioned in the converted
regulator bindings YAML file. It is also not listed in the MT6397
regulator bindings. Having them present produces a whole bunch of
validation errors:
Unevaluated properties are not allowed ('regulator-compatible' was unexpected)
Drop the "regulator-compatible" property from the board dts. The
property values are the same as the node name, so everything should
continue to work.
Fixes: 16ea61fc56 ("arm64: dts: mt8173-evb: Add PMIC support")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241211052427.4178367-3-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Commit c8000deb68 ("HID: multitouch: Add support for GT7868Q") added
support for 0x01e8 and 0x01e9, but the mt_device[] entries were added
twice for 0x01e8 and there was none added for 0x01e9. Fix that.
Fixes: c8000deb68 ("HID: multitouch: Add support for GT7868Q")
Reported-by: He Lugang <helugang@uniontech.com>
Reported-by: WangYuli <wangyuli@uniontech.com>
Reported-by: Ulrich Müller <ulm@gentoo.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Shifting 1 << 31 on a 32-bit int causes signed integer overflow, which
leads to undefined behavior. To prevent this, cast 1 to u32 before
performing the shift, ensuring well-defined behavior.
This change explicitly avoids any potential overflow by ensuring that
the shift occurs on an unsigned 32-bit integer.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240928113608.1438087-1-visitorckw@gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
This reverts commit 251efae73b.
Quoting Wang Yuli:
"The 27C6:01E0 touchpad doesn't require the workaround and applying it
would actually break functionality.
The initial report came from a BBS forum, but we suspect the
information provided by the forum user may be incorrect which could
happen sometimes. [1]
Further investigation showed that the Lenovo Y9000P 2024 doesn't even
use a Goodix touchpad. [2]
For the broader issue of 27c6:01e0 being unusable on some devices, it
just need to address it with a libinput quirk.
In conclusion, we should revert this commit, which is the best
solution."
Reported-by: Ulrich Müller <ulm@gentoo.org>
Reported-by: WangYuli <wangyuli@uniontech.com>
Link: https://lore.kernel.org/all/uikt4wwpw@gentoo.org/
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add bindings for qcom,sc7280-camss to support the camera subsystem
on the SC7280 platform.
Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
For the direct io case, the pages from userspace may be part of a huge
folio, even if all folios in the page cache for fuse are small.
Fix the logic for calculating the offset and length of the folio for
the direct io case, which currently incorrectly assumes that all folios
encountered are one page size.
Fixes: 3b97c3652d ("fuse: convert direct io to use folios")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Xe3 is capable of switching automatically to min ddb allocation
(not using any extra blocks) or interim SAGV-adjusted allocation
in case if async flip is used. Introduce the minimum and interim
ddb allocation configuration for that purpose. Also i915 is
replaced with intel_display within the patch's context
v2: update min/interim ddb declarations and handling (Ville)
update to register definitions styling
consolidation of minimal wm0 check with min DDB check
Bspec: 69880, 72053
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241121112726.510220-4-vinod.govindapillai@intel.com
Add a helper to the relative data rate handling in skl_watermarks.c
where other similar functions are implemented. Also get rid of
use_min_ddb() and use use_minimal_wm0() instead to decide whether
the relative data rate can be returned as 0
v2: re-phrase the commit description (uma)
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241121112726.510220-3-vinod.govindapillai@intel.com
Future platforms can have new additions in the plane_wm
registers. So update skl_wm_level_from_reg_val() to have
possiblity for such platform differentiations. This is in
preparation for the rest of the patches in this series where
hw support for the minimum and interim ddb allocations for
async flip is added. Replace all the i915 uses to intel_display
in this function while updating this function
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241121112726.510220-2-vinod.govindapillai@intel.com
Since the linked fixes: commit, err is returned uninitialized due to the
removal of "return 0". Initialize err to fix it.
This fixes the following intermittent test failure on release builds:
$ perf test "testsuite_probe"
...
-- [ FAIL ] -- perf_probe :: test_invalid_options :: mutually exclusive options :: -L foo -V bar (output regexp parsing)
Regexp not found: \"Error: switch .+ cannot be used with switch .+\"
...
Fixes: 080e47b2a2 ("perf probe: Introduce quotation marks support")
Tested-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20241211085525.519458-2-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The multi_cpu_stop() contains a loop that can initially be executed with
interrupts enabled (in the MULTI_STOP_NONE and MULTI_STOP_PREPARE states).
Interrupts are guaranteed to be once the MULTI_STOP_DISABLE_IRQ state
is reached. Unfortunately, the rcu_momentary_eqs() function that is
currently invoked on each pass through this loop requires that interrupts
be disabled.
This commit therefore moves this call to rcu_momentary_eqs() to the body
of the "else if (curstate > MULTI_STOP_PREPARE)" portion of the loop, thus
guaranteeing that interrupts will be disabled on each call, as required.
Kudos to 朱恺乾 (Kaiqian) for noting that this had not made it to mainline.
[ paulmck: Update from rcu_momentary_dyntick_idle() to rcu_momentary_eqs(). ]
Link: https://lore.kernel.org/all/1712649736-27058-1-git-send-email-quic_mojha@quicinc.com/
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently the CSD lock tunables can only be set at boot time in the
kernel commandline, but the way these variables are used means there
is really no reason not to tune them at runtime through /sys.
Make the CSD lock debug tunables tunable through /sys.
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Simplify error handling over locks with guard(). In few places this
elimiates error gotos and local variables. Switch to guard() everywhere
(except when jumps would go over scoped guard) for consistency, even if
it does not bring benefit in such places.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240822164815.230167-2-krzysztof.kozlowski@linaro.org
[bjorn: Rebased ontop of v6.13-rc1]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Russell King says:
====================
net: dsa: cleanup EEE (part 1)
First part of DSA EEE cleanups.
Patch 1 removes a useless test that is always false. dp->pl will always
be set for user ports, so !dp->pl in the EEE methods will always be
false.
Patch 2 adds support for a new DSA support_eee() method, which tells
DSA whether the DSA driver supports EEE, and thus whether the ethtool
set_eee() and get_eee() methods should return -EOPNOTSUPP.
Patch 3 adds a trivial implementation for this new method which
indicates that EEE is supported.
Patches 4..8 adds implementations for .supports_eee() to all drivers
that support EEE in some form.
Patch 9 switches the core DSA code to require a .supports_eee()
implementation if DSA is supported. Any DSA driver that doesn't
implement this method after this patch will not support the ethtool
EEE methods.
Part 2 will remove the (now) useless .get_mac_eee() DSA operation.
====================
Link: https://patch.msgid.link/Z1hNkEb13FMuDQiY@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we have updated all drivers, switch DSA to require an
implementation of the .support_eee() method for EEE to be usable,
rather than defaulting to being permissive when not implemented.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL14e-006cZy-AT@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the .support_eee() method by reusing the ksz_validate_eee()
method as a template, renaming the function, changing the return type
and values, and removing it from the ksz_set_mac_eee() and
ksz_get_mac_eee() methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL14Z-006cZs-6o@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the .support_eee() method by using the generic helper as all
user ports support EEE.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL14U-006cZm-2K@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the .support_eee() method by using the generic helper as all
user ports support EEE.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL14O-006cZg-VM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the .support_eee() method by using the generic helper as all
user ports support EEE.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL14J-006cZa-Rh@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the .support_eee() method to indicate that EEE is not
supported by two switch variants, rather than making these checks in
the .set_mac_eee() and .get_mac_eee() methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL14E-006cZU-Nc@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide a trivial implementation for the .support_eee() method which
switch drivers can use to simply indicate that they support EEE on
all their user ports.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL149-006cZJ-JJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a hook to determine whether the switch supports EEE. This will
return false if the switch does not, or true if it does. If the
method is not implemented, we assume (currently) that the switch
supports EEE.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL144-006cZD-El@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When user ports are initialised, a phylink instance is always created,
and so dp->pl will always be non-NULL. The EEE methods are only used
for user ports, so checking for dp->pl to be NULL makes no sense. No
other phylink-calling method implements similar checks in DSA. Remove
this unnecessary check.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL13z-006cZ7-BZ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In general, 'qlen' of any classful qdisc should keep track of the
number of packets that the qdisc itself and all of its children holds.
In case of netem, 'qlen' only accounts for the packets in its internal
tfifo. When netem is used with a child qdisc, the child qdisc can use
'qdisc_tree_reduce_backlog' to inform its parent, netem, about created
or dropped SKBs. This function updates 'qlen' and the backlog statistics
of netem, but netem does not account for changes made by a child qdisc.
'qlen' then indicates the wrong number of packets in the tfifo.
If a child qdisc creates new SKBs during enqueue and informs its parent
about this, netem's 'qlen' value is increased. When netem dequeues the
newly created SKBs from the child, the 'qlen' in netem is not updated.
If 'qlen' reaches the configured sch->limit, the enqueue function stops
working, even though the tfifo is not full.
Reproduce the bug:
Ensure that the sender machine has GSO enabled. Configure netem as root
qdisc and tbf as its child on the outgoing interface of the machine
as follows:
$ tc qdisc add dev <oif> root handle 1: netem delay 100ms limit 100
$ tc qdisc add dev <oif> parent 1:0 tbf rate 50Mbit burst 1542 latency 50ms
Send bulk TCP traffic out via this interface, e.g., by running an iPerf3
client on the machine. Check the qdisc statistics:
$ tc -s qdisc show dev <oif>
Statistics after 10s of iPerf3 TCP test before the fix (note that
netem's backlog > limit, netem stopped accepting packets):
qdisc netem 1: root refcnt 2 limit 1000 delay 100ms
Sent 2767766 bytes 1848 pkt (dropped 652, overlimits 0 requeues 0)
backlog 4294528236b 1155p requeues 0
qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms
Sent 2767766 bytes 1848 pkt (dropped 327, overlimits 7601 requeues 0)
backlog 0b 0p requeues 0
Statistics after the fix:
qdisc netem 1: root refcnt 2 limit 1000 delay 100ms
Sent 37766372 bytes 24974 pkt (dropped 9, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms
Sent 37766372 bytes 24974 pkt (dropped 327, overlimits 96017 requeues 0)
backlog 0b 0p requeues 0
tbf segments the GSO SKBs (tbf_segment) and updates the netem's 'qlen'.
The interface fully stops transferring packets and "locks". In this case,
the child qdisc and tfifo are empty, but 'qlen' indicates the tfifo is at
its limit and no more packets are accepted.
This patch adds a counter for the entries in the tfifo. Netem's 'qlen' is
only decreased when a packet is returned by its dequeue function, and not
during enqueuing into the child qdisc. External updates to 'qlen' are thus
accounted for and only the behavior of the backlog statistics changes. As
in other qdiscs, 'qlen' then keeps track of how many packets are held in
netem and all of its children. As before, sch->limit remains as the
maximum number of packets in the tfifo. The same applies to netem's
backlog statistics.
Fixes: 50612537e9 ("netem: fix classful handling")
Signed-off-by: Martin Ottens <martin.ottens@fau.de>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20241210131412.1837202-1-martin.ottens@fau.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- fix TT unitialized data and size limit issues, by Remi Pommarel
(3 patches)
-----BEGIN PGP SIGNATURE-----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=T2LN
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20241210' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- fix TT unitialized data and size limit issues, by Remi Pommarel
(3 patches)
* tag 'batadv-net-pullrequest-20241210' of git://git.open-mesh.org/linux-merge:
batman-adv: Do not let TT changes list grows indefinitely
batman-adv: Remove uninitialized data in full table TT response
batman-adv: Do not send uninitialized TT changes
====================
Link: https://patch.msgid.link/20241210135024.39068-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With this port schedule:
tc qdisc replace dev $send_if parent root handle 100 taprio \
num_tc 8 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
map 0 1 2 3 4 5 6 7 \
base-time 0 cycle-time 10000 \
sched-entry S 01 1250 \
sched-entry S 02 1250 \
sched-entry S 04 1250 \
sched-entry S 08 1250 \
sched-entry S 10 1250 \
sched-entry S 20 1250 \
sched-entry S 40 1250 \
sched-entry S 80 1250 \
flags 2
ptp4l would fail to take TX timestamps of Pdelay_Resp messages like this:
increasing tx_timestamp_timeout may correct this issue, but it is likely caused by a driver bug
ptp4l[4134.168]: port 2: send peer delay response failed
It turns out that the driver can't take their TX timestamps because it
can't transmit them in the first place. And there's nothing special
about the Pdelay_Resp packets - they're just regular 68 byte packets.
But with this taprio configuration, the switch would refuse to send even
the ETH_ZLEN minimum packet size.
This should have definitely not been the case. When applying the taprio
config, the driver prints:
mscc_felix 0000:00:00.5: port 0 tc 0 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
and thus, everything under 132 bytes - ETH_FCS_LEN should have been sent
without problems. Yet it's not.
For the forwarding path, the configuration is fine, yet packets injected
from Linux get stuck with this schedule no matter what.
The first hint that the static guard bands are the cause of the problem
is that reverting Michael Walle's commit 297c4de6f7 ("net: dsa: felix:
re-enable TAS guard band mode") made things work. It must be that the
guard bands are calculated incorrectly.
I remembered that there is a magic constant in the driver, set to 33 ns
for no logical reason other than experimentation, which says "never let
the static guard bands get so large as to leave less than this amount of
remaining space in the time slot, because the queue system will refuse
to schedule packets otherwise, and they will get stuck". I had a hunch
that my previous experimentally-determined value was only good for
packets coming from the forwarding path, and that the CPU injection path
needed more.
I came to the new value of 35 ns through binary search, after seeing
that with 544 ns (the bit time required to send the Pdelay_Resp packet
at gigabit) it works. Again, this is purely experimental, there's no
logic and the manual doesn't say anything.
The new driver prints for this schedule look like this:
mscc_felix 0000:00:00.5: port 0 tc 0 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
So yes, the maximum MTU is now even smaller by 1 byte than before.
This is maybe counter-intuitive, but makes more sense with a diagram of
one time slot.
Before:
Gate open Gate close
| |
v 1250 ns total time slot duration v
<---------------------------------------------------->
<----><---------------------------------------------->
33 ns 1217 ns static guard band
useful
Gate open Gate close
| |
v 1250 ns total time slot duration v
<---------------------------------------------------->
<-----><--------------------------------------------->
35 ns 1215 ns static guard band
useful
The static guard band implemented by this switch hardware directly
determines the maximum allowable MTU for that traffic class. The larger
it is, the earlier the switch will stop scheduling frames for
transmission, because otherwise they might overrun the gate close time
(and avoiding that is the entire purpose of Michael's patch).
So, we now have guard bands smaller by 2 ns, thus, in this particular
case, we lose a byte of the maximum MTU.
Fixes: 11afdc6526 ("net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Link: https://patch.msgid.link/20241210132640.3426788-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than maintaining a private copy of the LPI timer, make use of
the LPI timer maintained by phylib. In any case, phylib overwrites the
value of tx_lpi_timer set by the driver in phy_ethtool_get_eee().
Note that feb->eee.tx_lpi_timer is initialised to zero, which is just
the same with phylib's copy, so there should be no functional change.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/E1tKzVS-006c67-IJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The device does not support multiple mirror actions per rule and the
driver rejects such configuration:
# tc filter add dev swp1 ingress pref 1 proto ip flower skip_sw action mirred egress mirror dev swp2 action mirred egress mirror dev swp3
Error: mlxsw_spectrum: Multiple mirror actions per rule are not supported.
We have an error talking to the kernel
Internally, the sample action is implemented by the device by mirroring
to the CPU port. Therefore, mixing sample and mirror actions in a single
rule does not work correctly and results in the last action effect.
Solve by rejecting such misconfiguration:
# tc filter add dev swp1 ingress pref 1 proto ip flower skip_sw action mirred egress mirror dev swp2 action sample rate 100 group 1
Error: mlxsw_spectrum: Sample action after mirror action is not supported.
We have an error talking to the kernel
# tc filter add dev swp1 ingress pref 1 proto ip flower skip_sw action sample rate 100 group 1 action mirred egress mirror dev swp2
Error: mlxsw_spectrum: Mirror action after sample action is not supported.
We have an error talking to the kernel
Reported-by: Vladyslav Mykhaliuk <vmykhaliuk@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/d6c979914e8706dbe1dedbaf29ffffb0b8d71166.1733822570.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When `skb_splice_from_iter` was introduced, it inadvertently added
checksumming for AF_UNIX sockets. This resulted in significant
slowdowns, for example when using sendfile over unix sockets.
Using the test code in [1] in my test setup (2G single core qemu),
the client receives a 1000M file in:
- without the patch: 1482ms (+/- 36ms)
- with the patch: 652.5ms (+/- 22.9ms)
This commit addresses the issue by marking checksumming as unnecessary in
`unix_stream_sendmsg`
Cc: stable@vger.kernel.org
Signed-off-by: Frederik Deweerdt <deweerdt.lkml@gmail.com>
Fixes: 2e910b9532 ("net: Add a function to splice pages into an skbuff for MSG_SPLICE_PAGES")
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/Z1fMaHkRf8cfubuE@xiberoa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maxim Levitsky says:
====================
MANA: Fix few memory leaks in mana_gd_setup_irqs
Fix 2 minor memory leaks in the mana driver,
introduced by commit
====================
Link: https://patch.msgid.link/20241209175751.287738-1-mlevitsk@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gc->irq_contexts is not freeded if one of the later operations
fail.
Suggested-by: Michael Kelley <mhklinux@outlook.com>
Fixes: 8afefc3612 ("net: mana: Assigning IRQ affinity on HT cores")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Link: https://patch.msgid.link/20241209175751.287738-3-mlevitsk@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 8afefc3612 ("net: mana: Assigning IRQ affinity on HT cores")
added memory allocation in mana_gd_setup_irqs of 'irqs' but the code
doesn't free this temporary array in the success path.
This was caught by kmemleak.
Fixes: 8afefc3612 ("net: mana: Assigning IRQ affinity on HT cores")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Link: https://patch.msgid.link/20241209175751.287738-2-mlevitsk@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Today we have a hardcoded delay of 1 sec before a TIME-WAIT socket can be
reused by reopening a connection. This is a safe choice based on an
assumption that the other TCP timestamp clock frequency, which is unknown
to us, may be as low as 1 Hz (RFC 7323, section 5.4).
However, this means that in the presence of short lived connections with an
RTT of couple of milliseconds, the time during which a 4-tuple is blocked
from reuse can be orders of magnitude longer that the connection lifetime.
Combined with a reduced pool of ephemeral ports, when using
IP_LOCAL_PORT_RANGE to share an egress IP address between hosts [1], the
long TIME-WAIT reuse delay can lead to port exhaustion, where all available
4-tuples are tied up in TIME-WAIT state.
Turn the reuse delay into a per-netns setting so that sysadmins can make
more aggressive assumptions about remote TCP timestamp clock frequency and
shorten the delay in order to allow connections to reincarnate faster.
Note that applications can completely bypass the TIME-WAIT delay protection
already today by locking the local port with bind() before connecting. Such
immediate connection reuse may result in PAWS failing to detect old
duplicate segments, leaving us with just the sequence number check as a
safety net.
This new configurable offers a trade off where the sysadmin can balance
between the risk of PAWS detection failing to act versus exhausting ports
by having sockets tied up in TIME-WAIT state for too long.
[1] https://lpc.events/event/16/contributions/1349/
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20241209-jakub-krn-909-poc-msec-tw-tstamp-v2-2-66aca0eed03e@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare ground for TIME-WAIT socket reuse with subsecond delay.
Today the last TS.Recent update timestamp, recorded in seconds and stored
tp->ts_recent_stamp and tw->tw_ts_recent_stamp fields, has two purposes.
Firstly, it is used to track the age of the last recorded TS.Recent value
to detect when that value becomes outdated due to potential wrap-around of
the other TCP timestamp clock (RFC 7323, section 5.5).
For this purpose a second-based timestamp is completely sufficient as even
in the worst case scenario of a peer using a high resolution microsecond
timestamp, the wrap-around interval is ~36 minutes long.
Secondly, it serves as a threshold value for allowing TIME-WAIT socket
reuse. A TIME-WAIT socket can be reused only once the virtual 1 Hz clock,
ktime_get_seconds, is past the TS.Recent update timestamp.
The purpose behind delaying the TIME-WAIT socket reuse is to wait for the
other TCP timestamp clock to tick at least once before reusing the
connection. It is only then that the PAWS mechanism for the reopened
connection can detect old duplicate segments from the previous connection
incarnation (RFC 7323, appendix B.2).
In this case using a timestamp with second resolution not only blocks the
way toward allowing faster TIME-WAIT reuse after shorter subsecond delay,
but also makes it impossible to reliably delay TW reuse by one second.
As Eric Dumazet has pointed out [1], due to timestamp rounding, the TW
reuse delay will actually be between (0, 1] seconds, and 0.5 seconds on
average. We delay TW reuse for one full second only when last TS.Recent
update coincides with our virtual 1 Hz clock tick.
Considering the above, introduce a dedicated field to store a millisecond
timestamp of transition into the TIME-WAIT state. Place it in an existing
4-byte hole inside inet_timewait_sock structure to avoid an additional
memory cost.
Use the new timestamp to (i) reliably delay TIME-WAIT reuse by one second,
and (ii) prepare for configurable subsecond reuse delay in the subsequent
change.
We assume here that a full one second delay was the original intention in
[2] because it accounts for the worst case scenario of the other TCP using
the slowest recommended 1 Hz timestamp clock.
A more involved alternative would be to change the resolution of the last
TS.Recent update timestamp, tw->tw_ts_recent_stamp, to milliseconds.
[1] https://lore.kernel.org/netdev/CANn89iKB4GFd8sVzCbRttqw_96o3i2wDhX-3DraQtsceNGYwug@mail.gmail.com/
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b8439924316d5bcb266d165b93d632a4b4b859af
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20241209-jakub-krn-909-poc-msec-tw-tstamp-v2-1-66aca0eed03e@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
psf->sf_count[MCAST_XXX] fields are read locklessly from
ipv6_chk_mcast_addr() and igmp6_mcf_seq_show().
Add READ_ONCE() and WRITE_ONCE() annotations accordingly.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241210183352.86530-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mc->mca_sfcount[MCAST_EXCLUDE] is read locklessly from
ipv6_chk_mcast_addr().
Add READ_ONCE() and WRITE_ONCE() annotations accordingly.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241210183352.86530-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a label and two gotos to shorten lines by two tabulations,
to ease code review of following patches.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241210183352.86530-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jacob Keller says:
====================
lib: packing: introduce and use (un)pack_fields
This series improves the packing library with a new API for packing or
unpacking a large number of fields at once with minimal code footprint. The
API is then used to replace bespoke packing logic in the ice driver,
preparing it to handle unpacking in the future. Finally, the ice driver has
a few other cleanups related to the packing logic.
The pack_fields and unpack_fields functions have the following improvements
over the existing pack() and unpack() API:
1. Packing or unpacking a large number of fields takes significantly less
code. This significantly reduces the .text size for an increase in the
.data size which is much smaller.
2. The unpacked data can be stored in sizes smaller than u64 variables.
This reduces the storage requirement both for runtime data structures,
and for the rodata defining the fields. This scales with the number of
fields used.
3. Most of the error checking is done at compile time, rather than
runtime, via CHECK_PACKED_FIELD macros.
The actual packing and unpacking code still uses the u64 size
variables. However, these are converted to the appropriate field sizes when
storing or reading the data from the buffer.
This version now uses significantly improved macro checks, thanks to the
work of Vladimir. We now only need 300 lines of macro for the generated
checks. In addition, each new check only requires 4 lines of code for its
macro implementation and 1 extra line in the CHECK_PACKED_FIELDS macro.
This is significantly better than previous versions which required ~2700
lines.
The CHECK_PACKED_FIELDS macro uses __builtin_choose_expr to select the
appropriately sized CHECK_PACKED_FIELDS_N macro. This enables directly
adding CHECK_PACKED_FIELDS calls into the pack_fields and unpack_fields
macros. Drivers no longer need to call the CHECK_PACKED_FIELDS_N macros
directly, and we do not need to modify Kbuild or introduce multiple CONFIG
options.
The code for the CHECK_PACKED_FIELDS_(0..50) and CHECK_PACKED_FIELDS itself
can be generated from the C program in scripts/gen_packed_field_checks.c.
This little C program may be used in the future to update the checks to
more sizes if a driver with more than 50 fields appears in the future.
The total amount of required code is now much smaller, and we don't
anticipate needing to increase the size very often. Thus, it makes sense to
simply commit the result directly instead of attempting to modify Kbuild to
automatically generate it.
This version uses the 5-argument format of pack_fields and unpack_fields,
with the size of the packed buffer passed as one of the arguments. We do
enforce that the compiler can tell its a constant using
__builtin_constant_p(), ensuring that the size checks are handled at
compile time. We could reduce these to 4 arguments and require that the
passed in pbuf be of a type which has the appropriate size. I opted against
that because it makes the API less flexible and a bit less natural to use
in existing code.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
v9: https://lore.kernel.org/20241204-packing-pack-fields-and-ice-implementation-v9-0-81c8f2bd7323@intel.com
v8: https://lore.kernel.org/20241203-packing-pack-fields-and-ice-implementation-v8-0-2ed68edfe583@intel.com
v7: https://lore.kernel.org/20241202-packing-pack-fields-and-ice-implementation-v7-0-ed22e38e6c65@intel.com
v6: https://lore.kernel.org/20241118-packing-pack-fields-and-ice-implementation-v6-0-6af8b658a6c3@intel.com
v5: https://lore.kernel.org/20241111-packing-pack-fields-and-ice-implementation-v5-0-80c07349e6b7@intel.com
v4: https://lore.kernel.org/20241108-packing-pack-fields-and-ice-implementation-v4-0-81a9f42c30e5@intel.com
v3: https://lore.kernel.org/20241107-packing-pack-fields-and-ice-implementation-v3-0-27c566ac2436@intel.com
v2: https://lore.kernel.org/20241025-packing-pack-fields-and-ice-implementation-v2-0-734776c88e40@intel.com
v1: https://lore.kernel.org/20241011-packing-pack-fields-and-ice-implementation-v1-0-d9b1f7500740@intel.com
====================
Link: https://patch.msgid.link/20241210-packing-pack-fields-and-ice-implementation-v10-0-ee56a47479ac@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice_copy_rxq_ctx_to_hw() and ice_write_rxq_ctx() functions perform some
defensive checks which are typically frowned upon by kernel style
guidelines.
In particular, NULL checks on buffers which point to the stack are
discouraged, especially when the functions are static and only called once.
Checks of this sort only serve to hide potential programming error, as we
will not produce the normal crash dump on a NULL access.
In addition, ice_copy_rxq_ctx_to_hw() cannot fail in another way, so could
be made void.
Future support for VF Live Migration will need to introduce an inverse
function for reading Rx queue context from HW registers to unpack it, as
well as functions to pack and unpack Tx queue context from HW.
Rather than copying these style issues into the new functions, lets first
cleanup the existing code.
For the ice_copy_rxq_ctx_to_hw() function:
* Move the Rx queue index check out of this function.
* Convert the function to a void return.
* Use a simple int variable instead of a u8 for the for loop index, and
initialize it inside the for loop.
* Update the function description to better align with kernel doc style.
For the ice_write_rxq_ctx() function:
* Move the Rx queue index check into this function.
* Update the function description with a Returns: to align with kernel doc
style.
These changes align the existing write functions to current kernel
style, and will align with the style of the new functions added when we
implement live migration in a future series.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241210-packing-pack-fields-and-ice-implementation-v10-10-ee56a47479ac@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice_write_rxq_ctx() function is responsible for programming the Rx
Queue context into hardware. It receives the configuration in unpacked form
via the ice_rlan_ctx structure.
This function unconditionally modifies the context to set the prefetch
enable bit. This was done by commit c31a5c25bb ("ice: Always set prefena
when configuring an Rx queue"). Setting this bit makes sense, since
prefetching descriptors is almost always the preferred behavior.
However, the ice_write_rxq_ctx() function is not the place that actually
defines the queue context. We initialize the Rx Queue context in
ice_setup_rx_ctx(). It is surprising to have the Rx queue context changed
by a function who's responsibility is to program the given context to
hardware.
Following the principle of least surprise, move the setting of the prefetch
enable bit out of ice_write_rxq_ctx() and into the ice_setup_rx_ctx().
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241210-packing-pack-fields-and-ice-implementation-v10-9-ee56a47479ac@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice_rlan_ctx and ice_tlan_ctx structures have some fields which are
intentionally sized larger than necessary relative to the packed sizes the
data must fit into. This was done because the original ice_set_ctx()
function and its helpers did not correctly handle packing when the packed
bits straddled a byte. This is no longer the case with the use of the
<linux/packing.h> implementation.
Save some bytes in these structures by sizing the variables to the number
of bytes the actual bitpacked fields fit into.
There are a couple of gaps left in the structure, which is a result of the
fields being in the order they appear in the packed bit layout, but where
alignment forces some extra gaps. We could fix this, saving ~8 bytes from
each structure. However, these structures are not used heavily, and the
resulting savings is minimal:
$ bloat-o-meter ice-before-reorder.ko ice-after-reorder.ko
add/remove: 0/0 grow/shrink: 1/1 up/down: 26/-70 (-44)
Function old new delta
ice_vsi_cfg_txq 1873 1899 +26
ice_setup_rx_ctx.constprop 1529 1459 -70
Total: Before=1459555, After=1459511, chg -0.00%
Thus, the fields are left in the same order as the packed bit layout,
despite the gaps this causes.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241210-packing-pack-fields-and-ice-implementation-v10-8-ee56a47479ac@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice driver needs to write the Tx and Rx queue context when programming
Tx and Rx queues. This is currently done using some bespoke custom logic
via the ice_set_ctx() and its helper functions, along with bit position
definitions in the ice_tlan_ctx_info and ice_rlan_ctx_info structures.
This logic does work, but is problematic for several reasons:
1) ice_set_ctx requires a helper function for each byte size being packed,
as it uses a separate function to pack u8, u16, u32, and u64 fields.
This requires 4 functions which contain near-duplicate logic with the
types changed out.
2) The logic in the ice_pack_ctx_word, ice_pack_ctx_dword, and
ice_pack_ctx_qword does not handle values which straddle alignment
boundaries very well. This requires that several fields in the
ice_tlan_ctx_info and ice_rlan_ctx_info be a size larger than their bit
size should require.
3) Future support for live migration will require adding unpacking
functions to take the packed hardware context and unpack it into the
ice_rlan_ctx and ice_tlan_ctx structures. Implementing this would
require implementing ice_get_ctx, and its associated helper functions,
which essentially doubles the amount of code required.
The Linux kernel has had a packing library that can handle this logic since
commit 554aae3500 ("lib: Add support for generic packing operations").
The library was recently extended with support for packing or unpacking an
array of fields, with a similar structure as the ice_ctx_ele structure.
Replace the ice-specific ice_set_ctx() logic with the recently added
pack_fields and packed_field_s infrastructure from <linux/packing.h>
For API simplicity, the Tx and Rx queue context are programmed using
separate ice_pack_txq_ctx() and ice_pack_rxq_ctx(). This avoids needing to
export the packed_field_s arrays. The functions can pointers to the
appropriate ice_txq_ctx_buf_t and ice_rxq_ctx_buf_t types, ensuring that
only buffers of the appropriate size are passed.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241210-packing-pack-fields-and-ice-implementation-v10-7-ee56a47479ac@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice Tx and Rx queue context are currently stored as arrays of bytes
with defined size (ICE_RXQ_CTX_SZ and ICE_TXQ_CTX_SZ). The packed queue
context is often passed to other functions as a simple u8 * pointer, which
does not allow tracking the size. This makes the queue context API easy to
misuse, as you can pass an arbitrary u8 array or pointer.
Introduce wrapper typedefs which use a __packed structure that has the
proper fixed size for the Tx and Rx context buffers. This enables the
compiler to track the size of the value and ensures that passing the wrong
buffer size will be detected by the compiler.
The existing APIs do not benefit much from this change, however the
wrapping structures will be used to simplify the arguments of new packing
functions based on the recently introduced pack_fields API.
Co-developed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241210-packing-pack-fields-and-ice-implementation-v10-6-ee56a47479ac@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The int_q_state field of the ice_tlan_ctx structure represents the internal
queue state. However, we never actually need to assign this or read this
during normal operation. In fact, trying to unpack it would not be possible
as it is larger than a u64. Remove this field from the ice_tlan_ctx
structure, and remove its packing field from the ice_tlan_ctx_info array.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241210-packing-pack-fields-and-ice-implementation-v10-5-ee56a47479ac@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
