Fix set charge current limits for devices which allow to set the lowest
charge current limit to be greater zero. If requested charge current limit
is below lowest limit, the index equals current_limit_map_size which leads
to accessing memory beyond allocated memory.
Fixes: be2919d835 ("power: supply: gpio-charger: add charge-current-limit feature")
Cc: stable@vger.kernel.org
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://lore.kernel.org/r/20241209-fix-charge-current-limit-v1-1-760d9b8f2af3@liebherr.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Introduce it6263_is_input_bus_fmt_valid() and refactor the
it6263_bridge_atomic_get_input_bus_fmts() function to support VESA-24
format by selecting the LVDS input format based on the LVDS data mapping
and thereby support both JEIDA-24 and VESA-24 input formats.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241205080210.1285385-1-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The is_valid flag should reflect the validity state of both
the XXX_start and XXX_stop functions. But the use of '=' in
XXX_stop overwrites the validity state set by XXX_start. This
commit changes '=' to '|=' in XXX_stop to preserve and combine
the validity state of XXX_start and XXX_stop.
Signed-off-by: wangfushuai <wangfushuai@baidu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
After commit f79473ed92 ("pm: cpupower: Makefile: Allow overriding
cross-compiling env params") we would fail to cross compile cpupower in
buildroot which uses the recipe at [1] where only the CROSS variable is
being set.
The issue here is the use of the lazy evaluation for all variables: CC,
LD, AR, STRIP, RANLIB, rather than just CROSS.
[1]:
https://git.buildroot.net/buildroot/tree/package/linux-tools/linux-tool-cpupower.mk.in
Fixes: f79473ed92 ("pm: cpupower: Makefile: Allow overriding cross-compiling env params")
Reported-by: Florian Fainelli <florian.fainelli@broadcom.com>
Closes: https://lore.kernel.org/all/2bbabd2c-24ef-493c-a199-594e5dada3da@broadcom.com/
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
After `make run_tests`, the git status complains:
Untracked files:
(use "git add <file>..." to include in what will be committed)
cpufreq/cpufreq_selftest.dmesg_cpufreq.txt
cpufreq/cpufreq_selftest.dmesg_full.txt
cpufreq/cpufreq_selftest.txt
Link: https://lore.kernel.org/all/20241122074757.1583002-1-lizhijian@fujitsu.com/
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
These APIs are needed to support applications that use netlink to get VF
information from a PF driver.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Link: https://patch.msgid.link/20241206064135.2331790-1-srasheed@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
t4_set_vf_mac_acl() uses pf to set mac addr, but t4vf_get_vf_mac_acl()
uses port number to get mac addr, this leads to error when an attempt
to set MAC address on VF's of PF2 and PF3.
This patch fixes the issue by using port number to set mac address.
Fixes: e0cdac65ba ("cxgb4vf: configure ports accessible by the VF")
Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241206062014.49414-1-anumula@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each `bindgen` release may upgrade the list of Rust targets. For instance,
currently, in their master branch [1], the latest ones are:
Nightly => {
vectorcall_abi: #124485,
ptr_metadata: #81513,
layout_for_ptr: #69835,
},
Stable_1_77(77) => { offset_of: #106655 },
Stable_1_73(73) => { thiscall_abi: #42202 },
Stable_1_71(71) => { c_unwind_abi: #106075 },
Stable_1_68(68) => { abi_efiapi: #105795 },
By default, the highest stable release in their list is used, and users
are expected to set one if they need to support older Rust versions
(e.g. see [2]).
Thus, over time, new Rust features are used by default, and at some
point, it is likely that `bindgen` will emit Rust code that requires a
Rust version higher than our minimum (or perhaps enabling an unstable
feature). Currently, there is no problem because the maximum they have,
as seen above, is Rust 1.77.0, and our current minimum is Rust 1.78.0.
Therefore, set a Rust target explicitly now to prevent going forward in
time too much and thus getting potential build failures at some point.
Since we also support a minimum `bindgen` version, and since `bindgen`
does not support passing unknown Rust target versions, we need to use
the list of our minimum `bindgen` version, rather than the latest. So,
since `bindgen` 0.65.1 had this list [3], we need to use Rust 1.68.0:
/// Rust stable 1.64
/// * `core_ffi_c` ([Tracking issue](https://github.com/rust-lang/rust/issues/94501))
=> Stable_1_64 => 1.64;
/// Rust stable 1.68
/// * `abi_efiapi` calling convention ([Tracking issue](https://github.com/rust-lang/rust/issues/65815))
=> Stable_1_68 => 1.68;
/// Nightly rust
/// * `thiscall` calling convention ([Tracking issue](https://github.com/rust-lang/rust/issues/42202))
/// * `vectorcall` calling convention (no tracking issue)
/// * `c_unwind` calling convention ([Tracking issue](https://github.com/rust-lang/rust/issues/74990))
=> Nightly => nightly;
...
/// Latest stable release of Rust
pub const LATEST_STABLE_RUST: RustTarget = RustTarget::Stable_1_68;
Thus add the `--rust-target 1.68` parameter. Add a comment as well
explaining this.
An alternative would be to use the currently running (i.e. actual) `rustc`
and `bindgen` versions to pick a "better" Rust target version. However,
that would introduce more moving parts depending on the user setup and
is also more complex to implement.
Starting with `bindgen` 0.71.0 [4], we will be able to set any future
Rust version instead, i.e. we will be able to set here our minimum
supported Rust version. Christian implemented it [5] after seeing this
patch. Thanks!
Cc: Christian Poveda <git@pvdrz.com>
Cc: Emilio Cobos Álvarez <emilio@crisal.io>
Cc: stable@vger.kernel.org # needed for 6.12.y; unneeded for 6.6.y; do not apply to 6.1.y
Fixes: c844fa64a2 ("rust: start supporting several `bindgen` versions")
Link: 21c60f473f/bindgen/features.rs (L97-L105) [1]
Link: https://github.com/rust-lang/rust-bindgen/issues/2960 [2]
Link: 7d243056d3/bindgen/features.rs (L131-L150) [3]
Link: https://github.com/rust-lang/rust-bindgen/blob/main/CHANGELOG.md#0710-2024-12-06 [4]
Link: https://github.com/rust-lang/rust-bindgen/pull/2993 [5]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241123180323.255997-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Run selftests with different OAS values intead of hardcoding it to 48
bits.
We always keep OAS >= IAS to make the config valid for stage-2.
This can be further improved, if we split IAS/OAS configuration for
stage-1 and stage-2 (to use input sizes compatible with VA_BITS as
SMMUv3 does, or IAS > OAS which is valid for stage-1).
However, that adds more complexity, and the current change improves
coverage and makes it possible to test all concatenation cases.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20241202140604.422235-3-smostafa@google.com
Signed-off-by: Will Deacon <will@kernel.org>
At the moment, io-pgtable-arm uses concatenation only if it is
possible at level 0, which misses a case where concatenation is
mandatory at level 1 according to R_SRKBC in Arm spec DDI0487 K.a.
Also, that means concatenation can be used when not mandated,
contradicting the comment on the code. However, these cases can only
happen if the SMMUv3 driver is changed to use ias != oas for stage-2.
This patch re-writes the code to use concatenation only if mandatory,
fixing the missing case for level-1 and granule 16K with PA = 40 bits.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20241202140604.422235-2-smostafa@google.com
Signed-off-by: Will Deacon <will@kernel.org>
During boot some of the calls to tegra241_cmdqv_get_cmdq() will happen
in preemptible context. As this function calls smp_processor_id(), if
CONFIG_DEBUG_PREEMPT is enabled, these calls will trigger a series of
"BUG: using smp_processor_id() in preemptible" backtraces.
As tegra241_cmdqv_get_cmdq() only calls smp_processor_id() to use the
CPU number as a factor to balance out traffic on cmdq usage, it is safe
to use raw_smp_processor_id() here.
Cc: <stable@vger.kernel.org>
Fixes: 918eb5c856 ("iommu/arm-smmu-v3: Add in-kernel support for NVIDIA Tegra241 (Grace) CMDQV")
Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/Z1L1mja3nXzsJ0Pk@uudg.org
Signed-off-by: Will Deacon <will@kernel.org>
Clippy in the upcoming Rust 1.83.0 spots a spurious empty line since the
`clippy::empty_line_after_doc_comments` warning is now enabled by default
given it is part of the `suspicious` group [1]:
error: empty line after doc comment
--> drivers/gpu/drm/drm_panic_qr.rs:931:1
|
931 | / /// They must remain valid for the duration of the function call.
932 | |
| |_
933 | #[no_mangle]
934 | / pub unsafe extern "C" fn drm_panic_qr_generate(
935 | | url: *const i8,
936 | | data: *mut u8,
937 | | data_len: usize,
... |
940 | | tmp_size: usize,
941 | | ) -> u8 {
| |_______- the comment documents this function
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#empty_line_after_doc_comments
= note: `-D clippy::empty-line-after-doc-comments` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::empty_line_after_doc_comments)]`
= help: if the empty line is unintentional remove it
Thus remove the empty line.
Cc: stable@vger.kernel.org
Fixes: cb5164ac43 ("drm/panic: Add a QR code panic screen")
Link: https://github.com/rust-lang/rust-clippy/pull/13091 [1]
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20241125233332.697497-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
arm_smmu_domain_alloc_paging_flags() with a flags = 0 now does the same
thing as arm_smmu_domain_alloc_paging(), remove
arm_smmu_domain_alloc_paging().
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v1-0bb8d5313a27+27b-smmuv3_paging_flags_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The selection of S1/S2 is a bit indirect today, make
domain_alloc_paging_flags() directly decode the flags and select the
correct S1/S2 type.
Directly reject flag combinations the HW doesn't support when processing
the flags.
Fix missing rejection of some flag combinations that are not supported
today (ie NEST_PARENT | DIRTY_TRACKING) by using a switch statement to
list out exactly the combinations that are currently supported.
Move the determination of the stage out of arm_smmu_domain_finalise() and
into both callers. As today the default stage is S1 if supported in HW.
This makes arm_smmu_domain_alloc_paging_flags() self contained and no
longer calling arm_smmu_domain_alloc_paging().
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v1-0bb8d5313a27+27b-smmuv3_paging_flags_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Domains are now always finalized during allocation because the core code
no longer permits a NULL dev argument to domain_alloc_paging/_flags().
Remove the late finalize during attach that supported domains that were
not fully initialized.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v1-0bb8d5313a27+27b-smmuv3_paging_flags_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The temp directory is made and a known fake hwmon PMU created within
it. Prior to this fix the events were being incorrectly written to the
temp directory rather than the fake PMU directory. This didn't impact
the test as the directory fd matched the wrong location, but it
doesn't mirror what a hwmon PMU would actually look like.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20241206042306.1055913-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The hwmon PMU test will make a temp directory, open the directory with
O_DIRECTORY then fill it with contents. As the open is before the
filling the contents the later fdopendir may reflect the initial empty
state, meaning no events are seen. Change to re-open the directory,
rather than dup the fd, so the latest contents are seen.
Minor tweaks/additions to debug messages.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20241206042306.1055913-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Process pagetables may now be using new permission-indirection-based
features which an SMMU may not understand when given such a table for
SVA. Although SMMUv3.4 does add its own S1PIE feature, realistically
we're still going to have to cope with feature mismatches between CPUs
and SMMUs, so let's start simple and essentially just document the
expectations for what falls out as-is. Although it seems unlikely for
SVA applications to also depend on memory-hardening features, or
vice-versa, the relative lifecycles make it tricky to enforce mutual
exclusivity. Thankfully our PIE index allocation makes it relatively
benign for an SMMU to keep interpreting them as direct permissions, the
only real implication is that an SVA application cannot harden itself
against its own devices with these features. Thus, inform the user about
that just in case they have other expectations.
Also we don't (yet) support LPA2, so deny SVA entirely if we're going to
misunderstand the pagetable format altogether.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/68a37b00a720f0827cac0e4f40e4d3a688924054.1733406275.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Petr Machata says:
====================
vxlan: Support user-defined reserved bits
Currently the VXLAN header validation works by vxlan_rcv() going feature
by feature, each feature clearing the bits that it consumes. If anything
is left unparsed at the end, the packet is rejected.
Unfortunately there are machines out there that send VXLAN packets with
reserved bits set, even if they are configured to not use the
corresponding features. One such report is here[1], and we have heard
similar complaints from our customers as well.
This patchset adds an attribute that makes it configurable which bits
the user wishes to tolerate and which they consider reserved. This was
recommended in [1] as well.
A knob like that inevitably allows users to set as reserved bits that
are in fact required for the features enabled by the netdevice, such as
GPE. This is detected, and such configurations are rejected.
In patches #1..#7, the reserved bits validation code is gradually moved
away from the unparsed approach described above, to one where a given
set of valid bits is precomputed and then the packet is validated
against that.
In patch #8, this precomputed set is made configurable through a new
attribute IFLA_VXLAN_RESERVED_BITS.
Patches #9 and #10 massage the testsuite a bit, so that patch #11 can
introduce a selftest for the resreved bits feature.
The corresponding iproute2 support is available in [2].
[1] https://lore.kernel.org/netdev/db8b9e19-ad75-44d3-bfb2-46590d426ff5@proxmox.com/
[2] https://github.com/pmachata/iproute2/commits/vxlan_reserved_bits/
====================
Link: https://patch.msgid.link/cover.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Run VXLAN packets through a gateway. Flip individual bits of the packet
and/or reserved bits of the gateway, and check that the gateway treats the
packets as expected.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/388bef3c30ebc887d4e64cd86a362e2df2f2d2e1.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add ip_link_set_addr(), ip_link_set_up(), ip_addr_add() and ip_route_add()
to the suite of helpers that automatically schedule a corresponding
cleanup.
When setting a new MAC, one needs to remember the old address first. Move
mac_get() from forwarding/ to that end.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/add6bcbe30828fd01363266df20c338cf13aaf25.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The set of bits that the VXLAN netdevice currently considers reserved is
defined by the features enabled at the netdevice construction. In order to
make this configurable, add an attribute, IFLA_VXLAN_RESERVED_BITS. The
payload is a pair of big-endian u32's covering the VXLAN header. This is
validated against the set of flags used by the various enabled VXLAN
features, and attempts to override bits used by an enabled feature are
bounced.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/c657275e5ceed301e62c69fe8e559e32909442e2.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The code currently validates the VXLAN header in two ways: first by
comparing it with the set of reserved bits, constructed ahead of time
during the netdevice construction; and second by gradually clearing the
bits off a separate copy of VXLAN header, "unparsed". Drop the latter
validation method.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/4559f16c5664c189b3a4ee6f5da91f552ad4821c.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The VXLAN driver so far has not increased the error counters for packets
that set reserved bits. It does so for other packet errors, so do it for
this case as well.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/d096084167d56706d620afe5136cf37a2d34d1b9.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to make it possible to configure which bits in VXLAN header should
be considered reserved, introduce a new field vxlan_config::reserved_bits.
Have it cover the whole header, except for the VNI-present bit and the bits
for VNI itself, and have individual enabled features clear more bits off
reserved_bits.
(This is expressed as first constructing a used_bits set, and then
inverting it to get the reserved_bits. The set of used_bits will be useful
on its own for validation of user-set reserved_bits in a following patch.)
The patch also moves a comment relevant to the validation from the unparsed
validation site up to the new site. Logically this patch should add the new
comment, and a later patch that removes the unparsed bits would remove the
old comment. But keeping both legs in the same patch is better from the
history spelunking point of view.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/984dbf98d5940d3900268dbffaf70961f731d4a4.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Having a named reference to the VXLAN header is more handy than having to
conjure it anew through vxlan_hdr() on every use. Add a new variable and
convert several open-coded sites.
Additionally, convert one "unparsed" use to the new variable as well. Thus
the only "unparsed" uses that remain are the flag-clearing and the header
validity check at the end.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/2a0a940e883c435a0fdbcdc1d03c4858957ad00e.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The functions vxlan_remcsum() and vxlan_parse_gbp_hdr() take both the SKB
and the unparsed VXLAN header. Now that unparsed adjustment is handled
directly by vxlan_rcv(), drop this argument, and have the function derive
it from the SKB on its own.
vxlan_parse_gpe_proto() does not take SKB, so keep the header parameter.
However const it so that it's clear that the intention is that it does not
get changed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/5ea651f4e06485ba1a84a8eb556a457c39f0dfd4.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to migrate away from the use of unparsed to detect invalid flags,
move all the code that actually clears the flags from callees directly to
vxlan_rcv().
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/2857871d929375c881b9defe378473c8200ead9b.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vxlan_sock.flags is constructed from vxlan_dev.cfg.flags, as the subset of
flags (named VXLAN_F_RCV_FLAGS) that is important from the point of view of
socket sharing. Attempts to reconfigure these flags during the vxlan netdev
lifetime are also bounced. It is therefore immaterial whether we access the
flags through the vxlan_dev or through the socket.
Convert the socket accesses to netdevice accesses in this separate patch to
make the conversions that take place in the following patches more obvious.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/5d237ffd731055e524d7b7c436de43358d8743d2.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since iommu_fwspec_init() absorbed the basic driver probe deferral
check to wait for an IOMMU to register, we may as well handle the probe
deferral timeout there as well. The current inconsistency of callers
results in client devices deferring forever on an arm64 ACPI system
where an SMMU has failed its own driver probe.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/41fa59f156ef8d196d08fa75c4901e6d4b12e6c4.1733406914.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
kmemleak noticed that the iopf queue allocated deep down within
arm_smmu_init_structures() can be leaked by a subsequent error return
from arm_smmu_device_probe(). Furthermore, after arm_smmu_device_reset()
we will also leave the SMMU enabled with an empty Stream Table, silently
blocking all DMA. This proves rather annoying for debugging said probe
failure, so let's handle it a bit better by putting the SMMU back into
(more or less) the same state as if it hadn't probed at all.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/5137901958471cf67f2fad5c2229f8a8f1ae901a.1733406914.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Relying on the driver list was a cute idea for minimising the scope of
our SMMU device lookups, however it turns out to have a subtle flaw. The
SMMU device only gets added to that list after arm_smmu_device_probe()
returns success, so there's actually no way the iommu_device_register()
call from there could ever work as intended, even if it wasn't already
hampered by the fwspec setup not happening early enough.
Switch both arm_smmu_get_by_fwnode() implementations to use a platform
bus lookup instead, which *will* reliably work. Also make sure that we
don't register SMMUv2 instances until we've fully initialised them, to
avoid similar consequences of the lookup now finding a device with no
drvdata. Moving the error returns is also a perfect excuse to streamline
them with dev_err_probe() in the process.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/6d7ce1dc31873abdb75c895fb8bd2097cce098b4.1733406914.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
kernel-doc -Wall warns about missing Return: statement for non-void
functions. We have a number of kdocs in our headers which are missing
the colon, IOW they use
* Return some value
or
* Returns some value
Having the colon makes some sense, it should help kdoc parser avoid
false positives. So add them. This is mostly done with a sed script,
and removing the unnecessary cases (mostly the comments which aren't
kdoc).
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/20241205165914.1071102-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The SMMUv3 spec has a note that BYPASS and ATS don't work together under
the STE EATS field definition. However there is another section "13.6.4
Full ATS skipping stage 1" that explains under certain conditions BYPASS
and ATS do work together if the STE is using S1DSS to select BYPASS and
the CD table has the possibility for a substream.
When these comments were written the understanding was that all forms of
BYPASS just didn't work and this was to be a future problem to solve.
It turns out that ATS and IDENTITY will always work just fine:
- If STE.Config = BYPASS then the PCI ATS is disabled
- If a PASID domain is attached then S1DSS = BYPASS and ATS will be
enabled. This meets the requirements of 13.6.4 to automatically
generate 1:1 ATS replies on the RID.
Update the comments to reflect this.
Fixes: 7497f4211f ("iommu/arm-smmu-v3: Make changing domains be hitless for ATS")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-f27174f44f39+27a33-smmuv3_ats_note_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
In configurations with 2 or more DSA clusters it will fail to allocate
unique MDIO bus names as only the switch ID is used, fix this by using
a combination of the tree ID and switch ID when needed
Signed-off-by: Jesse Van Gavere <jesse.vangavere@scioteq.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241206204202.649912-1-jesse.vangavere@scioteq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mctp_dump_addrinfo() is one of the last users of
net->dev_index_head[] in the control path.
Switch to for_each_netdev_dump() for better scalability.
Use C99 for mctp_device_rtnl_msg_handlers[] to prepare
future RTNL removal from mctp_dump_addrinfo()
(mdev->addrs is not yet RCU protected)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Matt Johnston <matt@codeconstruct.com.au>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20241206223811.1343076-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With CONFIG_KPROBES_ON_FTRACE enabled on powerpc, ftrace_location_range
returns ftrace location for bpf_fentry_test1 at offset of 4 bytes from
function entry. This is because branch to _mcount function is at offset
of 4 bytes in function profile sequence.
To fix this, add entry_offset of 4 bytes while verifying the address for
kprobe entry address of bpf_fentry_test1 in verify_perf_link_info in
selftest, when CONFIG_KPROBES_ON_FTRACE is enabled.
Disassemble of bpf_fentry_test1:
c000000000e4b080 <bpf_fentry_test1>:
c000000000e4b080: a6 02 08 7c mflr r0
c000000000e4b084: b9 e2 22 4b bl c00000000007933c <_mcount>
c000000000e4b088: 01 00 63 38 addi r3,r3,1
c000000000e4b08c: b4 07 63 7c extsw r3,r3
c000000000e4b090: 20 00 80 4e blr
When CONFIG_PPC_FTRACE_OUT_OF_LINE [1] is enabled, these function profile
sequence is moved out of line with an unconditional branch at offset 0.
So, the test works without altering the offset for
'CONFIG_KPROBES_ON_FTRACE && CONFIG_PPC_FTRACE_OUT_OF_LINE' case.
Disassemble of bpf_fentry_test1:
c000000000f95190 <bpf_fentry_test1>:
c000000000f95190: 00 00 00 60 nop
c000000000f95194: 01 00 63 38 addi r3,r3,1
c000000000f95198: b4 07 63 7c extsw r3,r3
c000000000f9519c: 20 00 80 4e blr
[1] https://lore.kernel.org/all/20241030070850.1361304-13-hbathini@linux.ibm.com/
Fixes: 23cf7aa539 ("selftests/bpf: Add selftest for fill_link_info")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241209065720.234344-1-skb99@linux.ibm.com
The comparison function cmp_profile_data() violates the C standard's
requirements for qsort() comparison functions, which mandate symmetry
and transitivity:
* Symmetry: If x < y, then y > x.
* Transitivity: If x < y and y < z, then x < z.
When v1 and v2 are equal, the function incorrectly returns 1, breaking
symmetry and transitivity. This causes undefined behavior, which can
lead to memory corruption in certain versions of glibc [1].
Fix the issue by returning 0 when v1 and v2 are equal, ensuring
compliance with the C standard and preventing undefined behavior.
Link: https://www.qualys.com/2024/01/30/qsort.txt [1]
Fixes: 0f223813ed ("perf ftrace: Add 'profile' command")
Fixes: 74ae366c37 ("perf ftrace profile: Add -s/--sort option")
Cc: stable@vger.kernel.org
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: jserv@ccns.ncku.edu.tw
Cc: chuang@cs.nycu.edu.tw
Link: https://lore.kernel.org/r/20241209134226.1939163-1-visitorckw@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
David Howells says:
====================
rxrpc: Implement jumbo DATA transmission and RACK-TLP
Here's a series of patches to implement two main features:
(1) The transmission of jumbo data packets whereby several DATA packets of
a particular size can be glued together into a single UDP packet,
allowing us to make use of larger MTU sizes. The basic jumbo
subpacket capacity is 1412 bytes (RXRPC_JUMBO_DATALEN) and, say, an
MTU of 8192 allows five of them to be transmitted as one.
An alternative (and possibly more efficient way) would be to
expand/shrink the capacity of each DATA packet to match the MTU and
thus save on header and tail-gap overhead, but the Rx protocol does
not provide a mechanism for splitting the data - especially as the
transported data is encrypted per-packet - and so UDP fragmentation
would be the only way to handle this.
In fact, in the future, AF_RXRPC also needs to look at shrinking the
packet size where the MTU is smaller - for instance in the case of
being carried by IPv6 over wifi where there isn't capacity for a 1412
byte capacity.
(2) RACK-TLP to manage packet loss and retransmission in conjunction with
the congestion control algorithm.
These allow for better data throughput and work towards being able to have
larger transmission windows.
To this end, the following changes are also made:
(1) Use a single large array of kvec structs for the I/O thread rather
than having one per transmission buffer. We need a much bigger
collection of kvecs for ping padding
(2) Implement path-MTU probing by sending padded PING ACK packets and
monitoring for PING RESPONSE ACKs. The pmtud value determined is used
to configure the construction of jumbo DATA packets.
(3) The transmission queue is changed from a linked list of transmission
buffer structs to a linked list of transmission-queue structs, each of
which points to either 32 or 64 transmission buffers (depending on cpu
word size) and various bits of metadata are concentrated in the queue
structs rather than the buffers to make better use of the cpu cache.
(4) SACK data is stored in the transmission-queue structures in batches of
32 or 64 making it faster to process rather than being spread amongst
all the individual packet buffers.
(5) Don't change the DF flag on the UDP socket unless we need to - and
basically only enable it for path-MTU probing.
There are also some additional bits:
(1) Fix the handling of connection aborts to poke the aborted connections.
(2) Don't set the MORE-PACKETS Rx header flag on the wire. No one
actually checks it and it is, in any case, generated inconsistently
between implementations.
(3) Request an ACK when, during call transmission, there's a stall in the
app generating the data to be transmitted.
(4) Fix attention starvation in the I/O thread by making sure we go
through all outstanding events rather than returning to the beginning
of the check cycle after any time we process an event.
(5) Don't use the skbuff timestamp in the calculation of timeouts and RTT
as we really should include local processing time in that too.
Further, getting receive skbuff timestamps may be expensive.
(6) Make RTT tracking per call with the saving of the value between calls,
even within the same connection channel. The initial call timeout
starts off large to allow the server time to set up its state before
the initial reply.
(7) Don't allocate txbuf structs for ACK packets, but rather use page
frags and MSG_SPLICE_PAGES.
(8) Use irq-disabling locks for interactions between app threads and I/O
threads so that the I/O thread doesn't get help up.
(9) Make rxrpc set the REQUEST-ACK flag on an outgoing packet when cwnd is
at RXRPC_MIN_CWND (currently 4), not at 2 which it can never reach.
(10) Add some tracing bits and pieces (including displaying the userStatus
field in an ACK header) and some more stats counters (including
different sizes of jumbo packets sent/received).
Link: https://lore.kernel.org/r/20240306000655.1100294-1-dhowells@redhat.com/ [1]
====================
Link: https://patch.msgid.link/20241204074710.990092-1-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an rxrpc call is in its transmission phase and is sending a lot of
packets, stalls occasionally occur that cause severe performance
degradation (eg. increasing the transmission time for a 256MiB payload from
0.7s to 2.5s over a 10G link).
rxrpc already implements TCP-style congestion control [RFC5681] and this
helps mitigate the effects, but occasionally we're missing a time event
that deals with a missing ACK, leading to a stall until the RTO expires.
Fix this by implementing RACK/TLP in rxrpc.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rxrpc_prepare_data_subpacket() sets the REQUEST-ACK flag on the outgoing
DATA packet under a number of circumstances, including, theoretically, when
the cwnd is at minimum (or less). However, the minimum in this function is
hard-coded as 2, but the actual minimum is RXRPC_MIN_CWND (which is
currently 4) and so this never occurs.
Without this, we will miss the request of some ACKs, potentially leading to
a transmission stall until a timeout occurs on one side or the other that
leads to an ACK being generated.
Fix the function to use RXRPC_MIN_CWND rather than a hard-coded number.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Manage the determination of RTT on a per-call (ie. per-RPC op) basis rather
than on a per-peer basis, averaging across all calls going to that peer.
The problem is that the RTT measurements from the initial packets on a call
may be off because the server may do some setting up (such as getting a
lock on a file) before accepting the rest of the data in the RPC and,
further, the RTT may be affected by server-side file operations, for
instance if a large amount of data is being written or read.
Note: When handling the FS.StoreData-type RPCs, for example, the server
uses the userStatus field in the header of ACK packets as supplementary
flow control to aid in managing this. AF_RXRPC does not yet support this,
but it should be added.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Record the reason for the transmission of an ACK in the rxrpc_tx_ack
tracepoint, and not just in the rxrpc_propose_ack tracepoint.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an indicator to the rxrpc_tx_data tracepoint to indicate what triggered
the transmission of a particular packet. At this point, it's only normal
transmission and retransmission, plus the tracepoint is also used to record
loss injection, but in a future patch, TLP-induced (re-)transmission will
also be a thing.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tidy up the ACK parsing in the following ways:
(1) Put the serial number of the ACK packet into the rxrpc_ack_summary
struct and access it from there whilst parsing an ACK.
(2) Be consistent about using "if (summary.acked_serial)" rather than "if
(summary.acked_serial != 0)".
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Where a spinlock is used by both the application thread and the I/O thread,
use irq-disabling locking so that an interrupt taken on the app thread
doesn't also slow down the I/O thread.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
