User space may unload ip_set.ko while it is itself requesting a set type
backend module, leading to a kernel crash. The race condition may be
provoked by inserting an mdelay() right after the nfnl_unlock() call.
Fixes: a7b4f989a6 ("netfilter: ipset: IP set core support")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
FIELD_PREP() checks that a constant fits into the available bitfield,
but if one of the two lookup tables in stm32_impedance_tune() does
not find a matching entry, the index is out of range, which gcc
correctly complains about:
In file included from <command-line>:
In function 'stm32_impedance_tune',
inlined from 'stm32_combophy_pll_init' at drivers/phy/st/phy-stm32-combophy.c:247:9:
include/linux/compiler_types.h:517:38: error: call to '__compiletime_assert_447' declared with attribute error: FIELD_PREP: value too large for the field
517 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
include/linux/bitfield.h:68:3: note: in expansion of macro 'BUILD_BUG_ON_MSG'
68 | BUILD_BUG_ON_MSG(__builtin_constant_p(_val) ? \
115 | __BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: "); \
| ^~~~~~~~~~~~~~~~
drivers/phy/st/phy-stm32-combophy.c:162:8: note: in expansion of macro 'FIELD_PREP'
162 | FIELD_PREP(STM32MP25_PCIEPRG_IMPCTRL_VSWING, vswing_of));
| ^~~~~~~~~~
Rework this so the field value gets set inside of the loop and otherwise
set to zero.
Fixes: 47e1bb6b4b ("phy: stm32: Add support for STM32MP25 COMBOPHY.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241111103712.3520611-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In RX Lane configuration sequence of SC8280XP, the register
V5_RX_UCDR_FO_GAIN is incorrectly spelled as RX_UCDR_SO_GAIN and
hence the programming sequence is wrong. Fix the register sequence
accordingly to avoid any compliance failures. This has been tested
on SA8775P by checking device mode enumeration in SuperSpeed.
Cc: stable@vger.kernel.org
Fixes: c0c7769cda ("phy: qcom-qmp: Add SC8280XP USB3 UNI phy")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241112092831.4110942-1-quic_kriskura@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the phy init sequence for the Super Speed ports found
on IPQ5424.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20241118052839.382431-3-quic_varada@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the compatible string used for the qusb2 phy in IPQ5424.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20241118052839.382431-2-quic_varada@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
At least version 2 of the HDMI PHY, found in MediaTek MT8195 and
MT8188 SoCs, does provide hardware support to switch on/off the
HDMI 5V pins (which are also used for DDC), and this translates
to this being a fixed regulator.
Register this PHY-provided regulator so that it can be fed to the
hdmi-connector driver to manage the HDMI +5V PWR rail.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241120124143.132637-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The i.MX95 usb-phy can work with or without orientation-switch. With
current setting, if usb-phy works without orientation-switch, the
dt-schema check will show below error:
phy@4c1f0040: 'oneOf' conditional failed, one must be fixed:
'port' is a required property
'ports' is a required property
from schema $id: http://devicetree.org/schemas/phy/fsl,imx8mq-usb-phy.yaml#
This will correct the behavior of referring to usb-switch.yaml.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241119105017.917833-1-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In the expression "cmd.wqe_size * cmd.wr_count", both variables are u32
values that come from the user so the multiplication can lead to integer
wrapping. Then we pass the result to uverbs_request_next_ptr() which also
could potentially wrap. The "cmd.sge_count * sizeof(struct ib_uverbs_sge)"
multiplication can also overflow on 32bit systems although it's fine on
64bit systems.
This patch does two things. First, I've re-arranged the condition in
uverbs_request_next_ptr() so that the use controlled variable "len" is on
one side of the comparison by itself without any math. Then I've modified
all the callers to use size_mul() for the multiplications.
Fixes: 67cdb40ca4 ("[IB] uverbs: Implement more commands")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/b8765ab3-c2da-4611-aae0-ddd6ba173d23@stanley.mountain
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently, the USB port via combophy on the RK3528/RK3588 SoC is broken.
usb usb8-port1: Cannot enable. Maybe the USB cable is bad?
This is due to the combphy of RK3528/RK3588 SoC has multiple resets, but
only "phy resets" need assert and deassert, "apb resets" don't need.
So change the driver to only match the phy resets, which is also what
the vendor kernel does.
Fixes: 7160820d74 ("phy: rockchip: add naneng combo phy for RK3568")
Cc: FUKAUMI Naoki <naoki@radxa.com>
Cc: Michael Zimmermann <sigmaepsilon92@gmail.com>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20241122073006.99309-2-amadeus@jmu.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When bringing up the PHY, it might be in a bad state if left powered.
One case is we lose the PLL lock if the PLL is gated while the PHY
is powered. Toggle the PHY power so we can start from a known state.
Fixes: 4e5b9c9a73 ("phy: usb: Add support for new Synopsys USB controller on the 7216")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20241024213540.1059412-1-justin.chen@broadcom.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
res->dattr is always valid at this point as it was initialized
during device addition in bnxt_re_add_device().
This change is fixing the following smatch error:
drivers/infiniband/hw/bnxt_re/qplib_fp.c:1090 bnxt_qplib_create_qp()
error: we previously assumed 'res->dattr' could be null (see line 985)
Fixes: 07f830ae49 ("RDMA/bnxt_re: Adds MSN table capability for Gen P7 adapters")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202411222329.YTrwonWi-lkp@intel.com/
Link: https://patch.msgid.link/be0d8836b64cba3e479fbcbca717acad04aae02e.1732626579.git.leonro@nvidia.com
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Commit de60266825 ("phy: tegra: Add PCIe PIPE2UPHY support for Tegra234")
add support for Tegra234 to the tegra194-p2u PHY driver. But the driver is
currently not selectable when Tegra234 SoC support is enabled.
Update the Kconfig entry to allow the driver to be built when support the
Tegra234 SoC is enabled.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20241201002519.3468-1-lars@metafoo.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is very little data left in fifo, and the controller will
complete the transmission in a short period of time, so
use readl_poll_timeout() for busy wait 10us to accelerate response.
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Link: https://patch.msgid.link/20241203013513.2628810-1-jon.lin@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Panther Lake SPI controllers are compatible with the Cannon Lake
controllers. Add support for following SPI controller device IDs:
- H-series: 0xe323
- P-series: 0xe423
- U-series: 0xe423
Signed-off-by: Aapo Vienamo <aapo.vienamo@iki.fi>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20241204080208.1036537-1-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20241012071919.3726-7-linux.amoon@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Refactor the mutex handling in the rockchip_pcie_phy_power_on() function to
improve code readability and maintainability. The goto statement has
been removed, and the mutex_unlock call is now directly within the
conditional block.
Return the result of reset_control_deassert() or regmap_read_poll_timeout()
function, with 0 indicating success and an error code indicating failure.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20241012071919.3726-6-linux.amoon@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Refactor the mutex handling in the rockchip_pcie_phy_power_off() function
to improve code readability and maintainability. The goto statement has
been removed, and the mutex_unlock call is now directly within the
conditional block.
Return the result of reset_control_assert() function, with 0 indicating
success and an error code indicating failure
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20241012071919.3726-5-linux.amoon@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use devm_clk_get_enabled() instead of devm_clk_get() to make the code
cleaner and avoid calling clk_disable_unprepare(), as this is exactly
what this function does. Use the dev_err_probe() helper to simplify
error handling during probe.
Refactor the mutex handling in the rockchip_pcie_phy_init() function
to improve code readability and maintainability. The goto statement has
been removed, and the mutex_unlock call is now directly within the
conditional block.
Return the result of reset_control_assert() function, with 0 indicating
success and an error code indicating failure
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20241012071919.3726-3-linux.amoon@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use the dev_err_probe() helper to simplify error handling during probe.
This also handle scenario, when -EDEFER is returned and useless error
is printed.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20241012071919.3726-2-linux.amoon@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Refactor the camss_link_entities function by breaking it down into
three distinct functions. Each function will handle the linking of
a specific entity separately.
SC7280 and later targets mandates for 1:1 linking for csid -> vfe.
i.e. csid0 can be mapped to vfe0 only.
Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Introducing a new function camss_link_err to avoid repition of
same error message, improving code maintainability.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The get_dma_ops and set_dma_ops APIs were never for driver to use. Remove
these calls from QDMA driver. Instead, pass the DMA device pointer from the
qdma_platdata structure.
Fixes: 73d5fc92a1 ("dmaengine: amd: qdma: Add AMD QDMA driver")
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240918181022.2155715-1-lizhi.hou@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Changes to sch->q.qlen around qdisc_tree_reduce_backlog() need to happen
_before_ a call to said function because otherwise it may fail to notify
parent qdiscs when the child is about to become empty.
Signed-off-by: Lion Ackermann <nnamrec@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ADMAC attached to the AOP has complex power sequencing, and is
power gated when the probe callback runs. Move the register reads
to other functions, where we can guarantee that the hardware is
switched on.
Fixes: 568aa6dd64 ("dmaengine: apple-admac: Allocate cache SRAM to channels")
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://lore.kernel.org/r/20241124-admac-power-v1-1-58f2165a4d55@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The comment block for "Interleaved Transfer Request" should not begin
with "/**" since it is not in kernel-doc format.
Fix doc name for enum sum_check_flags.
Fix all (4) missing struct member warnings.
Use "Warning:" for one "Note:" in enum dma_desc_metadata_mode since
scripts/kernel-doc does not allow more than one Note:
per function or identifier description.
This leaves around 49 kernel-doc warnings like:
include/linux/dmaengine.h:43: warning: Enum value 'DMA_OUT_OF_ORDER' not described in enum 'dma_status'
and another scripts/kernel-doc problem with it not being able to parse
some typedefs.
Fixes: b14dab792d ("DMAEngine: Define interleaved transfer request api")
Fixes: ad283ea4a3 ("async_tx: add sum check flags")
Fixes: 272420214d ("dmaengine: Add DMA_CTRL_REUSE")
Fixes: f067025bc6 ("dmaengine: add support to provide error result from a DMA transation")
Fixes: d38a8c622a ("dmaengine: prepare for generic 'unmap' data")
Fixes: 5878853fc9 ("dmaengine: Add API function dmaengine_prep_peripheral_dma_vec()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Nuno Sa <nuno.sa@analog.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Link: https://lore.kernel.org/r/20241202172004.76020-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Let's start using struct intel_display instead of struct drm_i915_private
when introducing new code. No functional changes.
v2: Drop tc_to_intel_display() helper function (Jani)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127073200.124907-3-mika.kahola@intel.com
There is a HW issue that arises when there are race conditions
between TCSS entering/exiting TC7 or TC10 states while the
driver is asserting/deasserting TCSS power request. As a
workaround, Display driver will implement a mailbox sequence
to ensure that the TCSS is in TC0 when TCSS power request is
asserted/deasserted.
The sequence is the following
1. Read mailbox command status and wait until run/busy bit is
clear
2. Write mailbox data value '1' for power request asserting
and '0' for power request deasserting
3. Write mailbox command run/busy bit and command value with 0x1
4. Read mailbox command and wait until run/busy bit is clear
before continuing power request.
v2: Rename WA function (Gustavo)
Limit WA only for PTL platform with a TODO note (Gustavo)
Add TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY for clarity when writing
register data (Gustavo)
Move register defs from i915_reg.h to intel_cx0_phy_regs.h (Gustavo)
v3: Use "struct intel_display" instead of "struct drm_i915_private" (Jani)
Move defs above C10 definitions in the
intel_cx0_phy_regs.h file (Gustavo)
Move drm_WARN_ON() inside WA function (Gustavo)
Rename workaround function as wa_14020908590() (Gustvo)
Use boolean enable instead of if-else structure (Raag)
v4: Drop drm_WARN_ON() (Raag)
Fix function definition to fit into a single line (Raag)
v5: Drop TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY from TCSS_DISP_MAILBOX_IN_CMD_DATA(val)
macro (Jani)
Rename WA function with some meaningful name and add comment
on WA number (Jani)
Use struct intel_display on WA calling function (Jani)
Reviewed-by: Raag Jadav <raag.jadav@intel.com> (v4)
Acked-by: Jani Nikula <jani.nikula@intel.com> (v5)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127073200.124907-2-mika.kahola@intel.com
Add a new ioctl, DRM_IOCTL_V3D_PERFMON_SET_GLOBAL, to allow
configuration of a global performance monitor (perfmon).
Use the global perfmon for all jobs to ensure consistent
performance tracking across submissions. This feature is
needed to implement a Perfetto datasources in user-space.
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241202140615.74802-1-christian.gmeiner@gmail.com
When committing transaction in jbd2_journal_commit_transaction(), the
disk caches for the filesystem device should be flushed before updating
the journal tail sequence. However, this step is missed if the journal
is not located on the filesystem device. As a result, the filesystem may
become inconsistent following a power failure or system crash. Fix it by
ensuring that the filesystem device is flushed appropriately.
Fixes: 3339578f05 ("jbd2: cleanup journal tail after transaction commit")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20241203014407.805916-3-yi.zhang@huaweicloud.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Commit '6a3afb6ac6 ("jbd2: increase the journal IO's priority")'
increases the priority of journal I/O by marking I/O with the
JBD2_JOURNAL_REQ_FLAGS. However, that commit missed the revoke buffers,
so also addresses that kind of I/Os.
Fixes: 6a3afb6ac6 ("jbd2: increase the journal IO's priority")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20241203014407.805916-2-yi.zhang@huaweicloud.com
Reviewed-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
When matching erspan_opt in cls_flower, only the (version, dir, hwid)
fields are relevant. However, in fl_set_erspan_opt() it initializes
all bits of erspan_opt and its mask to 1. This inadvertently requires
packets to match not only the (version, dir, hwid) fields but also the
other fields that are unexpectedly set to 1.
This patch resolves the issue by ensuring that only the (version, dir,
hwid) fields are configured in fl_set_erspan_opt(), leaving the other
fields to 0 in erspan_opt.
Fixes: 79b1011cb3 ("net: sched: allow flower to match erspan options")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ttm_bo_access() returns the size on success, account for that otherwise
the caller incorrectly thinks this is an error in
intel_atomic_prepare_plane_clear_colors().
v2 (Thomas)
- Make sure we check for the partial copy case. Also since this api is
easy to get wrong, wrap the whole thing in a new helper to hide the
details and then convert the existing users over.
Fixes: b6308aaa24 ("drm/xe/display: Update intel_bo_read_from_page to use ttm_bo_access")
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3661
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241202170102.88893-2-matthew.auld@intel.com
Currently, ffa_dev->properties is set after the ffa_device_register()
call return in ffa_setup_partitions(). This could potentially result in
a race where the partition's properties is accessed while probing
struct ffa_device before it is set.
Update the ffa_device_register() to receive ffa_partition_info so all
the data from the partition information received from the firmware can
be updated into the struct ffa_device before the calling device_register()
in ffa_device_register().
Fixes: e781858488 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration")
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Message-Id: <20241203143109.1030514-2-yeoreum.yun@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The PHY is either c10 or c20, there's no need to check at runtime and
complicate the conditions in mtl_get_cx0_buf_trans().
While at it, replace the direct port clock check with
intel_dp_is_uhbr().
Cc: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129114158.486418-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This is a follow-up to 982300c115 ("r8169: remove detection of chip
version 11 (early RTL8168b)"). Nobody complained yet, so remove
support for this chip version.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/b689ab6d-20b5-4b64-bd7e-531a0a972ba3@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After 854d71c555 ("r8169: remove original workaround for RTL8125
broken rx issue") this flag isn't used any longer. So remove it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/d9dd214b-3027-4f60-b0e8-6f34a0c76582@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The check for non-zero ring with RSS is only relevant for
ETHTOOL_SRXCLSRLINS command, in other cases the check tries to access
memory which was not initialized by the userspace tool. Only perform the
check in case of ETHTOOL_SRXCLSRLINS.
Without this patch, filter deletion (for example) could statistically
result in a false error:
# ethtool --config-ntuple eth3 delete 484
rmgr: Cannot delete RX class rule: Invalid argument
Cannot delete classification rule
Fixes: 9e43ad7a1e ("net: ethtool: only allow set_rxnfc with rss + ring_cookie if driver opts in")
Link: https://lore.kernel.org/netdev/871a9ecf-1e14-40dd-bbd7-e90c92f89d47@nvidia.com/
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20241202164805.1637093-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 612b1c0dec. On a
scenario with multiple threads blocking on a recvfrom(), we need to call
sock_def_readable() on every __udp_enqueue_schedule_skb() otherwise the
threads won't be woken up as __skb_wait_for_more_packets() is using
prepare_to_wait_exclusive().
Link: https://bugzilla.redhat.com/2308477
Fixes: 612b1c0dec ("udp: avoid calling sock_def_readable() if possible")
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241202155620.1719-1-ffmancera@riseup.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
