Adding lockdep checking to the coredump code showed that there was an
existing violation. The dev_coredumpm_timeout() call is used to
register the dump with the base coredump subsystem. However, that
makes multiple memory allocations, only some of which use the GFP_
flags passed in. So that also needs to be deferred to the worker
function where it is safe to allocate with arbitrary flags.
In order to not add protoypes for the callback functions, moving the
_timeout call also means moving the worker thread function to later in
the file.
v2: Rebased after other changes to the worker function.
Fixes: e799485044 ("drm/xe: Introduce the dev_coredump infrastructure.")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: intel-xe@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241128210824.3302147-3-John.C.Harrison@Intel.com
There are debug level prints giving more information about the cause
of the hang immediately before core dumps are created. However, not
everyone has debug level prints enabled or saves the dmesg log at all.
So include that information in the dump file itself. Also, at least
one of those prints included the pid as well as the process name. So
include that in the capture too.
v2: Fix kvfree vs kfree and missing kernel-doc (review feedback from
Matthew Brost)
v3: Use GFP_ATOMIC instead of GFP_KERNEL.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241128210824.3302147-2-John.C.Harrison@Intel.com
PTP patches go via the netdev trees, add drivers/ptp/ to the networking
entry so that get_maintainer.pl --scm lists those trees above Linus's
tree.
Thanks to the real entry using drivers/ptp/* the original entry will
still be considered more specific / higher prio.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/20241130214100.125325-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/ptp to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
While touching these drivers, make the alignment of the touched
initializers consistent.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
smu->workload_mask is IP specific and should not be messed with in
the common code. The mask bits vary across SMU versions.
Move all handling of smu->workload_mask in to the backends and
simplify the code. Store the user's preference in smu->power_profile_mode
which will be reflected in sysfs. For internal driver profile
switches for KFD or VCN, just update the workload mask so that the
user's preference is retained. Remove all of the extra now unused
workload related elements in the smu structure.
v2: use refcounts for workload profiles
v3: rework based on feedback from Lijo
v4: fix the refcount on failure, drop backend mask
v5: rework custom handling
v6: handle failure cleanup with custom profile
v7: Update documentation
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
This reverts commit 74e1006430.
This causes a regression in the workload selection.
A more extensive fix is being worked on.
For now, revert.
This came back after a merge in 6.13-rc1, so revert again.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3618
Fixes: 74e1006430 ("drm/amd/pm: correct the workload setting")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 44f392fbf6)
Use found block to call correct init/resume function on the block.
Set status.hw for resume and init.
Print re-init result again. Change to use dev_info.
Use amdgpu_device_ip_get_ip_block to get target block instead of
loop.
Fixes: 502d76308d ("drm/amdgpu: validate resume before function call")
Signed-off-by: Yiqing Yao <YiQing.Yao@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ISP hw_init is not called with the recent changes related
to hw init levels. AMDGPU_INIT_LEVEL_DEFAULT is ignoring
the ISP IP block as AMDGPU_IP_BLK_MASK_ALL is derived using
incorrect max number of IP blocks.
Update AMDGPU_IP_BLK_MASK_ALL to use AMDGPU_MAX_IP_NUM
instead of (AMDGPU_MAX_IP_NUM - 1) to fix the issue.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Fixes: 14f2fe34f5 ("drm/amdgpu: Add init levels")
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Some DSC timing failed at bandwidth validation due to hactive
can't be evenly divided on each ODM segment.
[HOW]
Borrow from hblank to increase hactive to support these timing.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Hardware does not support the VTotal to be between fp2 lines of the
maximum possible VTotal, so add a capability flag to track it and apply
where necessary.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The minimum value of the dst_y_prefetch_equ was not correct
in prefetch calculation whice causes OPTC underflow.
[HOW]
Add the min operation of dst_y_prefetch_equ in prefetch calculation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
For better power profiling knowing the detile
buffer size at a given point in time
would be useful.
[HOW]
Add interface to retrieve detile buffer from
dc state.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Sung Lee <Sung.Lee@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
On some cards when odm is used, the monitor will have 2 separate pipes
split vertically. When compression is used on the YCbCr colour space on
the second pipe to have correct colours, we need to read a pixel from the
end of first pipe to accurately display colours. Hardware was programmed
properly to account for this extra pixel but it was not calculated
properly in software causing a split screen on some monitors.
[HOW]
The fix adjusts the second pipe's viewport and timings if the pixel
encoding is YCbCr422 or YCbCr420.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: George Shen <george.shen@amd.com>
Signed-off-by: Peterson Guo <peterson.guo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cacheline size is not available in IP discovery for gc943,gc944.
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Add MEC version from which alternate support for no PCIe atomics
is provided so that device is not skipped during KFD device init in
GFX1200/GFX1201.
Signed-off-by: Sreekant Somasekharan <sreekant.somasekharan@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
commit 38077562e0 ("drm/amd/display: Implement new
backlight_level_params structure") adjusted DC core to require
the backlight type to be programmed in the dc link when changing
brightness. This isn't initialized in amdgpu_dm for OLED panels
though which broke brightness.
Explicitly initialize when aux support is enabled.
Reported-and-tested-by: Luke Jones <luke@ljones.dev>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3792
Fixes: 38077562e0 ("drm/amd/display: Implement new backlight_level_params structure")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20241128032200.2085398-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An HP Pavilion Aero Laptop 13-be0xxx/8916 has an ACPI EDID, but using
it is causing corruption. It's got illogical values of not specifying
a digital interface. Sanity check the ACPI EDID to avoid tripping such
problems.
Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3782
Fixes: c6a837088b ("drm/amd/display: Fetch the EDID from _DDC if available for eDP")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20241128032500.2088288-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
on ROCK 5B, there is no PCIe slot, instead there is a M.2 slot.
rfkill pin is not exclusive to PCIe devices, there is SDIO Wi-Fi
devices.
rename rfkill label from "rfkill-pcie-wlan" to "rfkill-m2-wlan", it
matches with rfkill-bt.
Fixes: 82d40b141a ("arm64: dts: rockchip: add rfkill node for M.2 Key E WiFi on rock-5b")
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Fixes: 82d40b141a ("arm64: dts: rockchip: add rfkill node for M.2 Key E WiFi on rock-5b")
Link: https://lore.kernel.org/r/20241128120631.37458-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
When XSTATE_BV[i] is 0, and XRSTOR attempts to restore state component
'i' it ignores any value in the XSAVE buffer and instead restores the
state component's init value.
This means that if XSAVE writes XSTATE_BV[PKRU]=0 then XRSTOR will
ignore the value that update_pkru_in_sigframe() writes to the XSAVE buffer.
XSTATE_BV[PKRU] only gets written as 0 if PKRU is in its init state. On
Intel CPUs, basically never happens because the kernel usually
overwrites the init value (aside: this is why we didn't notice this bug
until now). But on AMD, the init tracker is more aggressive and will
track PKRU as being in its init state upon any wrpkru(0x0).
Unfortunately, sig_prepare_pkru() does just that: wrpkru(0x0).
This writes XSTATE_BV[PKRU]=0 which makes XRSTOR ignore the PKRU value
in the sigframe.
To fix this, always overwrite the sigframe XSTATE_BV with a value that
has XSTATE_BV[PKRU]==1. This ensures that XRSTOR will not ignore what
update_pkru_in_sigframe() wrote.
The problematic sequence of events is something like this:
Userspace does:
* wrpkru(0xffff0000) (or whatever)
* Hardware sets: XINUSE[PKRU]=1
Signal happens, kernel is entered:
* sig_prepare_pkru() => wrpkru(0x00000000)
* Hardware sets: XINUSE[PKRU]=0 (aggressive AMD init tracker)
* XSAVE writes most of XSAVE buffer, including
XSTATE_BV[PKRU]=XINUSE[PKRU]=0
* update_pkru_in_sigframe() overwrites PKRU in XSAVE buffer
... signal handling
* XRSTOR sees XSTATE_BV[PKRU]==0, ignores just-written value
from update_pkru_in_sigframe()
Fixes: 70044df250 ("x86/pkeys: Update PKRU to enable all pkeys before XSAVE")
Suggested-by: Rudi Horn <rudi.horn@oracle.com>
Signed-off-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20241119174520.3987538-3-aruna.ramakrishna%40oracle.com
update_pkru_in_sigframe() will shortly need some information which
is only available inside xsave_to_user_sigframe(). Move
update_pkru_in_sigframe() inside the other function to make it
easier to provide it that information.
No functional changes.
Signed-off-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20241119174520.3987538-2-aruna.ramakrishna%40oracle.com
Commit cd81d3a069 ("arm64: dts: rockchip: add rk3588 pcie and php
IOMMUs") added the rk3588 SoC's pcie IOMMU and php IOMMU as disabled.
The mmu600_pcie is connected with the five PCIe controllers.
See 8.2 Block Diagram, in rk3588 TRM (Technical Reference Manual).
The five PCIe controllers are:
pcie3x4, pcie3x2, pcie2x1l0, pcie2x1l1, pcie2x1l2.
pcie3x4 can run in either Root Complex mode or Endpoint mode, the other
four PCIe controllers can only run in Root Complex mode. To describe this
we thus have six different device nodes in the device tree.
A PCIe controller in Root Complex mode needs to specify an iommu-map, such
that the device knows how to convert a Requester ID (PCI BDF) to an IOMMU
master ID (stream ID). (A PCIe controller in Endpoint mode should use the
iommus property, just like a regular device.)
If you look at the device tree bindings for msi-map and iommu-map, you can
see that the conversion from Requester ID to MSI-specifier data is the same
as the conversion from Requester ID to IOMMU specifier data. Thus it is
sensible to define the iommu-map property value similar to the msi-map,
such that the conversion will be identical.
Add the proper iommu device tree properties for these six device nodes
connected to the mmu600_pcie, so that we can enable the mmu600_pcie IOMMU.
(The mmu600_php IOMMU is not touched, so it is still disabled.)
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20241107123732.1160063-2-cassel@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
On VCN 1.0, VCN and JPEG use the same worker thread so cancel
the vcn worker rather than jpeg. On VCN 2.0 and newer
there are separate workers for each.
Fixes: 93df748737 ("drm/amdgpu/jpeg: cancel the jpeg worker")
Tested-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This signal handler loops over all tests on ctrl-C, but it's active
while the test list is being constructed. process.pid is 0, then -1,
then finally set to the child pid on fork. If the Ctrl-C is received
during this point a kill(-1, SIGINT) can be sent which affects all
processes.
Make sure the child has forked first before forwarding the signal. This
can be reproduced with ctrl-C immediately after launching perf test
which terminates the ssh connection.
Fixes: 553d5efeb3 ("perf test: Add a signal handler to kill forked child processes")
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241129151948.3199732-1-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The build-id events written at the end of the record session are broken
due to unexpected data. The write_buildid() writes the fixed length
event first and then variable length filename.
But a recent change made it write more data in the padding area
accidentally. So readers of the event see zero-filled data for the
next entry and treat it incorrectly. This resulted in wrong kernel
symbols because the kernel DSO loaded a random vmlinux image in the
path as it didn't have a valid build-id.
Fixes: ae39ba1655 ("perf inject: Fix build ID injection")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/Z0aRFFW9xMh3mqKB@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Milk-V Mars board routes one of four USB-A ports to USB0 on the SoC
rather than to the VL805 USB 3.0 <-> PCIe chip.
Set JH7110 on-chip USB host mode and vbus pin assignment accordingly.
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: E Shattow <e@freeshell.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Pine64 Star64 board routes all four USB-A ports to USB0 on the SoC.
Set JH7110 on-chip USB host mode and vbus pin assignment accordingly.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
serial_test_flow_dissector_namespace manipulates both the root net
namespace and a dedicated non-root net namespace. If for some reason a
program attach on root namespace succeeds while it was expected to
fail, the unexpected program will remain attached to the root namespace,
possibly affecting other runs or even other tests in the same run.
Fix undesired test failure side effect by explicitly detaching programs
on failing tests expecting attach to fail. As a side effect of this
change, do not test errno value if the tested operation do not fail.
Fixes: 284ed00a59dd ("selftests/bpf: migrate flow_dissector namespace exclusivity test")
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241128-small_flow_test_fix-v1-1-c12d45c98c59@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 63dfa10043 ("nvme: move NVME_QUIRK_DEALLOCATE_ZEROES out of
nvme_config_discard") started applying the NVME_QUIRK_DEALLOCATE_ZEROES
quirk even then the Dataset Management is not supported. It turns out
that there versions of these old Intel SSDs that have DSM support
disabled in the firmware, which will now lead to errors everytime
a Write Zeroes command is issued. Fix this by checking for DSM support
before applying the quirk.
Reported-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Fixes: 63dfa10043 ("nvme: move NVME_QUIRK_DEALLOCATE_ZEROES out of nvme_config_discard")
Tested-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The nvme_execute_identify_ns_nvm function uses ZERO_PAGE for copying
SG list with all zeros. As ZERO_PAGE would not necessarily return the
virtual-address of the zero page, we need to first convert the page
address to kernel virtual-address and then use it as source address
for copying the data to SG list with all zeros. Using return address
of ZERO_PAGE(0) as source address for copying data to SG list would
fill the target buffer with random/garbage value and causes the
undesired side effect.
As other identify implemenations uses kzalloc for allocating a zero
filled buffer, we decided use kzalloc for allocating a zero filled
buffer in nvme_execute_identify_ns_nvm function and then use this
buffer for copying all zeros to SG list buffers. So esentially, we
now avoid using ZERO_PAGE.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: 64a51080ea ("nvmet: implement id ns for nvm command set")
Link: https://lore.kernel.org/all/CAHj4cs8OVyxmn4XTvA=y4uQ3qWpdw-x3M3FSUYr-KpE-nhaFEA@mail.gmail.com/
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20241202113641.1003836-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The AMD PMC driver is actively being developed, so the MAINTAINERS record
should reflect "Supported" instead of "Maintained." Update the MAINTAINERS
database to reflect this change.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20241108070822.3912689-11-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Previously, AMD's Ryzen Desktop SoCs did not include support for STB.
However, to accommodate this recent change, PMFW has implemented a new
message port pair mechanism for handling messages, arguments, and
responses, specifically designed for distinguishing from Mobile SoCs.
Therefore, it is necessary to update the driver to properly handle this
incoming change.
Add a new function amd_stb_update_args() to simply the arguments that
needs to be passed between S2D supported Mobile SoCs vs Desktop SoCs.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20241108070822.3912689-10-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
AMD's 1Ah family 70h model uses a different S2D (Spill to DRAM) message
ID. Update the driver with this information.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20241108070822.3912689-9-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The latest AMD processors include additional IP blocks that must be turned
off before transitioning to low power. PMFW provides an interface to
retrieve debug information from each IP block, which is useful for
diagnosing issues if the system fails to enter or exit low power states,
or for profiling which IP block takes more time. Add support for using
this information within the driver.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20241108070822.3912689-8-Shyam-sundar.S-k@amd.com
[ij: grouped active_ips, ips_ptr, and num_ips next to each other.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Instead of manually specifying num_ips, use ARRAY_SIZE() to set this value
based on the actual number of elements in the array.
Reviewed-by: Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241108070822.3912689-7-Shyam-sundar.S-k@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Since S2D (Spill to DRAM) uses different message port offsets compared to
PMC message offsets for communication with PMFW, relocate the S2D macros
from pmc.c to a new file, mp1_stb.c, for better code organization.
Following this change, it is logical to introduce a new structure,
"struct stb_arg," to pass the message, argument, and response offset
details to PMFW via the amd_pmc_send_cmd() call. Additionally, move the
s2d_msg_id member from amd_pmc_dev into the new structure.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20241108070822.3912689-6-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To distinguish between the PMC message port and the S2D (Spill to DRAM)
message port, replace the use of 0 and 1 with an enum.
To avoid printing the S2D or PMC port multiple times in debug print,
add new routine to retrieve the message port information, which can be
used to print the right msg_port getting used.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20241108070822.3912689-5-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
With STB now in a separate file, update the function names to match the
correct naming schema by removing the _pmc_ prefix where needed.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20241108070822.3912689-4-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
As the SoC evolves with each generation, the dynamics between the PMC and
STB layers within the PMC driver are becoming increasingly complex, making
it challenging to manage both in a single file and maintain code
readability.
Additionally, during silicon bringup, the PMC functionality is often
enabled first, with STB functionality added later. This can lead to missed
updates in the driver, potentially causing issues.
To address these challenges, it's beneficial to move all STB-related
changes to a separate file. This approach will better accommodate newer
SoCs, provide improved flexibility for desktop variants, and facilitate
the collection of additional debug information through STB mechanisms.
Also the additional checks for entering s2d_init have been moved from
the PMC probe to amd_pmc_s2d_init(). This adjustment makes more sense
following the transfer of code to the separate mp1_stb.c file.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20241108070822.3912689-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Transfer the support for STB-related file operations to the
amd_pmc_s2d_init() function, thereby consolidating the STB and S2D
(Spill to DRAM) functionality in one location. Also, relocate the
call to amd_pmc_s2d_init() to occur after the creation of the
"amd_pmc" debugfs directory. This ensures that the driver's root debugfs
directory is established beforehand.
For older platforms that supported S2D, exit immediately after creating
debugfs. These platforms may not support the PMFW messages available on
newer platforms. This adjustment is necessary due to the relocation of
debugfs creation into amd_pmc_s2d_init().
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20241108070822.3912689-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use the ptdma_debugfs_setup function to register debugfs for AE4DMA DMA
engine.
Reviewed-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/r/20241025095931.726018-7-Basavaraj.Natikar@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
