ceph_caps_revoking() has been unused since 2017's commit
3fb99d483e ("ceph: nuke startsync op")
ceph_mdsc_open_export_target_sessions() has been unused since 2013's
commit 11df2dfb61 ("ceph: add imported caps when handling cap export message")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_crypto_key_encode() was added in 2010's commit
8b6e4f2d8b ("ceph: aes crypto and base64 encode/decode helpers")
but has remained unused (the decode is used).
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_osdc_watch_check() has been unused since it was added in commit
b07d3c4bd7 ("libceph: support for checking on status of watch")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_copy_user_to_page_vector() has been unused since 2013's commit
e8344e6689 ("ceph: Implement writev/pwritev for sync operation.")
ceph_copy_to_page_vector() has been unused since 2012's commit
913d2fdcf6 ("rbd: always pass ops array to rbd_req_sync_op()")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_pagelist_truncate() and ceph_pagelist_set_cursor() have been unused
since commit
39be95e9c8 ("ceph: ceph_pagelist_append might sleep while atomic")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Ensure the superblock is kept alive until we're done with iput().
Holding a reference to an inode is not allowed unless we ensure the
superblock stays alive, which fsnotify does by keeping the
watched_objects count elevated, so iput() must happen before the
watched_objects decrement.
This can lead to a UAF of something like sb->s_fs_info in tmpfs, but the
UAF is hard to hit because race orderings that oops are more likely, thanks
to the CHECK_DATA_CORRUPTION() block in generic_shutdown_super().
Also, ensure that fsnotify_put_sb_watched_objects() doesn't call
fsnotify_sb_watched_objects() on a superblock that may have already been
freed, which would cause a UAF read of sb->s_fsnotify_info.
Cc: stable@kernel.org
Fixes: d2f277e26f ("fsnotify: rename fsnotify_{get,put}_sb_connectors()")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Syz reports:
BUG: KCSAN: data-race in __se_sys_io_uring_register / io_sqe_files_register
read-write to 0xffff8881021940b8 of 4 bytes by task 5923 on cpu 1:
io_sqe_files_register+0x2c4/0x3b0 io_uring/rsrc.c:713
__io_uring_register io_uring/register.c:403 [inline]
__do_sys_io_uring_register io_uring/register.c:611 [inline]
__se_sys_io_uring_register+0x8d0/0x1280 io_uring/register.c:591
__x64_sys_io_uring_register+0x55/0x70 io_uring/register.c:591
x64_sys_call+0x202/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:428
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xc9/0x1c0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
read to 0xffff8881021940b8 of 4 bytes by task 5924 on cpu 0:
__do_sys_io_uring_register io_uring/register.c:613 [inline]
__se_sys_io_uring_register+0xe4a/0x1280 io_uring/register.c:591
__x64_sys_io_uring_register+0x55/0x70 io_uring/register.c:591
x64_sys_call+0x202/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:428
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xc9/0x1c0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Which should be due to reading the table size after unlock. We don't
care much as it's just to print it in trace, but we might as well do it
under the lock.
Reported-by: syzbot+5a486fef3de40e0d8c76@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8233af2886a37b57f79e444e3db88fcfda1817ac.1731942203.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If dlm_recover_members() fails we don't drop the references of the
previous created root_list that holds and keep all rsbs alive during the
recovery. It might be not an unlikely event because ping_members() could
run into an -EINTR if another recovery progress was triggered again.
Fixes: 3a747f4a2e ("dlm: move rsb root_list to ls_recover() stack")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
All FTSMPS525 regulators support LV and MV ranges; however,
the boot loader firmware will determine which range to use as
the device boots.
Nonetheless, the driver cannot determine which range was selected,
so hardcoding the ranges as either LV or MV will not cover all cases
as it's possible for the firmware to select a range not supported by
the driver's current hardcoded values.
To this end, combine the ranges for the FTSMPS525s into one struct
and point all regulators to the updated combined struct. This should
work on all boards regardless of which range is selected by the firmware
and more accurately caputres the capability of this regulator on a
hardware level.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20241112002645.2803506-1-quic_molvera@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This NULL value is most-likely a copy-paste error from an array
definition. So far the NULL didn't have any effect.
As there will be a union in struct attribute_group at this location,
it will trigger a compiler warning.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241118-sysfs-const-attribute_group-fixes-v1-2-48e0b0ad8cba@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This NULL value is most-likely a copy-paste error from an array
definition. So far the NULL didn't have any effect.
As there will be a union in struct attribute_group at this location,
it will trigger a compiler warning.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241118-sysfs-const-attribute_group-fixes-v1-1-48e0b0ad8cba@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Problem: When using kdb via keyboard it does not react to control
characters which are supported in serial mode.
Example: Chords such as ctrl+a/e/d/p do not work in keyboard mode
Solution: Before disregarding non-printable key characters, check if they
are one of the supported control characters, I have took the control
characters from the switch case upwards in this function that translates
scan codes of arrow keys/backspace/home/.. to the control characters.
Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Nir Lichtman <nir@lichtman.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20241111215622.GA161253@lichtman.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
This laptop model requires an additional detection quirk to enable the
internal microphone
Signed-off-by: Alex Far <anf1980@gmail.com>
Link: https://patch.msgid.link/ZzjrZY3sImcqTtGx@RedmiG
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit b571cfcb9d.
This patch appears to assume that if one request is complete, then the
others will complete too before unlocking. That is not a valid
assumption, since other requests could hit a non-fatal error or a short
write that would cause them not to complete.
Reported-by: Igor Raits <igor@gooddata.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219508
Fixes: b571cfcb9d ("nfs: don't reuse partially completed requests in nfs_lock_and_join_requests")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Currently we limit the max block size for all users to ensure each block
can fit within a sg entry (uint). Drop this restriction and tweak the sg
construction to instead handle this itself and break down blocks which
are too big, if needed. Most users don't need an sg list in the first
place.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Tested-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241113172346.256165-2-matthew.auld@intel.com
The header clearly states that it does not want to be included directly,
only via 'device.h'. 'platform_device.h' works equally well. Remove the
direct inclusion.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20241118072917.3853-14-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
LS7A HD-Audio disable interrupts and use polling mode due to hardware
drawbacks. As a result, unsolicited jack events are also unusable. If
we want to support headphone hotplug, we need to also poll jack events.
Here we use 1500ms as the poll interval if no module parameter specify
it.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20241115150653.2819100-1-chenhuacai@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This release was mainly about new drivers, there's a very large batch of
new drivers and devices including quite a few from newer vendors which
is great to see. Other than the new drivers and the usual routine fixes
and enhancements the bulk of the work has been Morimoto-san's continuing
work on simplifiying APIs, plus a few other bits:
- More API simplifications from Morimoto-san.
- Renaming of the sh directory to Renesas to reflect the focus on other
architectures.
- Factoring out of some of the common code for Realtek devices.
- Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307, Longsoon
I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342, Qualcomm
SM8750, RealTek RT721, and ST Microelectronics STM32MP25.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmc7NioACgkQJNaLcl1U
h9CQpQf/R0SfnI7RKkYNwyqiH+aHn75bMOAq5xyGqfUIithkWXFRwi+4r08wW0yF
3u6GLgwuzjHAGzupN+TxWTucglMdzwdaL+Z+JbVwhejK0ugTz/EJOS/Y0IW+pIoX
/icQuE3fcW1ODDrDoBp8KkkjkCGwUddR6Oth75oDMEFG++ug7x8zxJEEvhZ6deFr
7UOAa22BqdCRNFWGmYJvJH31SKsapQcA237/bRTHitiNhwxIYRnQ7VvaOES7BdcT
BtL2yCjgU2o3MGwdJdj5r/tm0HC6M1o7mJF2bb3i9dos6NB4uOM9UV4dKNcdKth9
TGIbd62noD5h03HzBCplREfA3ynrsA==
=6HJR
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.13
This release was mainly about new drivers, there's a very large batch of
new drivers and devices including quite a few from newer vendors which
is great to see. Other than the new drivers and the usual routine fixes
and enhancements the bulk of the work has been Morimoto-san's continuing
work on simplifiying APIs, plus a few other bits:
- More API simplifications from Morimoto-san.
- Renaming of the sh directory to Renesas to reflect the focus on other
architectures.
- Factoring out of some of the common code for Realtek devices.
- Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307, Longsoon
I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342, Qualcomm
SM8750, RealTek RT721, and ST Microelectronics STM32MP25.
Instead of hard-coded values and ifdefs, store the year offset in the
platform_data struct.
Tested-by: Daniel Palmer <daniel@0x0f.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Acked-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/665c3526184a8d0c4a6373297d8e7d9a12591d8b.1731450735.git.fthain@linux-m68k.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When the I3C subsystem wants to assign a dynamic address using the SETDASA
CCC, it needs to attach the I3C device with device info that includes only
the static address. In the HCI, if the driver want to send this SETDASA
CCC, a DAT entry is required to temporarily fill the device's static
address into the dynamic address field. Afterward, the reattach API will
be executed to update the DAT with the correct dynamic addrees value.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20241113035826.923918-1-billy_tsai@aspeedtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The AMD Legacy I3C is having a problem with its IP, specifically with the
push-pull and open-drain pull-up registers. These registers need to be
manually programmed for every CCC submission to align with the duty cycle.
Therefore, add a quirk to address this issue.
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20241114110239.660551-3-Shyam-sundar.S-k@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add AMDI0015 _HID for Designware I3C driver so that the dw-i3c-master
driver can be probed on AMD platforms.
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20241114110239.660551-2-Shyam-sundar.S-k@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
AM65 CPSW hardware can map the 6-bit DSCP/TOS field to
appropriate priority queue via DSCP to Priority mapping registers
(CPSW_PN_RX_PRI_MAP_REG).
Use a default DSCP to User Priority (UP) mapping as per
https://datatracker.ietf.org/doc/html/rfc8325#section-4.3
and
https://datatracker.ietf.org/doc/html/rfc8622#section-11
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IEEE802.1Q-2014 supersedes IEEE802.1D-2004. Now Priority Code Point (PCP)
2 is no longer at a lower priority than PCP 0. PCP 1 (Background) is still
at a lower priority than PCP 0 (Best Effort).
Reference:
IEEE802.1Q-2014, Standard for Local and metropolitan area networks
Table I-2 - Traffic type acronyms
Table I-3 - Defining traffic types
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Philo Lu says:
====================
udp: Add 4-tuple hash for connected sockets
This patchset introduces 4-tuple hash for connected udp sockets, to make
connected udp lookup faster.
Stress test results (with 1 cpu fully used) are shown below, in pps:
(1) _un-connected_ socket as server
[a] w/o hash4: 1,825176
[b] w/ hash4: 1,831750 (+0.36%)
(2) 500 _connected_ sockets as server
[c] w/o hash4: 290860 (only 16% of [a])
[d] w/ hash4: 1,889658 (+3.1% compared with [b])
With hash4, compute_score is skipped when lookup, so [d] is slightly
better than [b].
Patch1: Add a new counter for hslot2 named hash4_cnt, to avoid cache line
miss when lookup.
Patch2: Add hslot/hlist_nulls for 4-tuple hash.
Patch3 and 4: Implement 4-tuple hash for ipv4 and ipv6.
The detailed motivation is described in Patch 3.
The 4-tuple hash increases the size of udp_sock and udp_hslot. Thus add it
with CONFIG_BASE_SMALL, i.e., it's a no op with CONFIG_BASE_SMALL.
Intentionally, the feature is not available for udplite. Though udplite
shares some structs and functions with udp, its connect() keeps unchanged.
So all udplite sockets perform the same as un-connected udp sockets.
Besides, udplite also shares the additional memory consumption in udp_sock
and udptable.
changelogs:
v8 -> v9 (Paolo Abeni):
- Add explanation about udplite in cover letter
- Update tags for co-developers
- Add acked-by tags of Paolo and Willem
v7 -> v8:
- add EXPORT_SYMBOL for ipv6.ko build
v6 -> v7 (Kuniyuki Iwashima):
- export udp_ehashfn to be used by udpv6 rehash
v5 -> v6 (Paolo Abeni):
- move udp_table_hash4_init from patch2 to patch1
- use hlist_nulls for lookup-rehash race
- add test results in commit log
- add more comment, e.g., for rehash4 used in hash4
- add ipv6 support (Patch4), and refactor some functions for better
sharing, without functionality change
v4 -> v5 (Paolo Abeni):
- add CONFIG_BASE_SMALL with which udp hash4 does nothing
v3 -> v4 (Willem de Bruijn):
- fix mistakes in udp_pernet_table_alloc()
RFCv2 -> v3 (Gur Stavi):
- minor fix in udp_hashslot2() and udp_table_init()
- add rcu sync in rehash4()
RFCv1 -> RFCv2:
- add a new struct for hslot2
- remove the sockopt UDP_HASH4 because it has little side effect for
unconnected sockets
- add rehash in connect()
- re-organize the patch into 3 smaller ones
- other minor fix
v8:
https://lore.kernel.org/all/20241108054836.123484-1-lulie@linux.alibaba.com/
v7:
https://lore.kernel.org/all/20241105121225.12513-1-lulie@linux.alibaba.com/
v6:
https://lore.kernel.org/all/20241031124550.20227-1-lulie@linux.alibaba.com/
v5:
https://lore.kernel.org/all/20241018114535.35712-1-lulie@linux.alibaba.com/
v4:
https://lore.kernel.org/all/20241012012918.70888-1-lulie@linux.alibaba.com/
v3:
https://lore.kernel.org/all/20241010090351.79698-1-lulie@linux.alibaba.com/
RFCv2:
https://lore.kernel.org/all/20240924110414.52618-1-lulie@linux.alibaba.com/
RFCv1:
https://lore.kernel.org/all/20240913100941.8565-1-lulie@linux.alibaba.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement ipv6 udp hash4 like that in ipv4. The major difference is that
the hash value should be calculated with udp6_ehashfn(). Besides,
ipv4-mapped ipv6 address is handled before hash() and rehash(). Export
udp_ehashfn because now we use it in udpv6 rehash.
Core procedures of hash/unhash/rehash are same as ipv4, and udpv4 and
udpv6 share the same udptable, so some functions in ipv4 hash4 can also
be shared.
Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com>
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com>
Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com>
Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the udp_table has two hash table, the port hash and portaddr
hash. Usually for UDP servers, all sockets have the same local port and
addr, so they are all on the same hash slot within a reuseport group.
In some applications, UDP servers use connect() to manage clients. In
particular, when firstly receiving from an unseen 4 tuple, a new socket
is created and connect()ed to the remote addr:port, and then the fd is
used exclusively by the client.
Once there are connected sks in a reuseport group, udp has to score all
sks in the same hash2 slot to find the best match. This could be
inefficient with a large number of connections, resulting in high
softirq overhead.
To solve the problem, this patch implement 4-tuple hash for connected
udp sockets. During connect(), hash4 slot is updated, as well as a
corresponding counter, hash4_cnt, in hslot2. In __udp4_lib_lookup(),
hslot4 will be searched firstly if the counter is non-zero. Otherwise,
hslot2 is used like before. Note that only connected sockets enter this
hash4 path, while un-connected ones are not affected.
hlist_nulls is used for hash4, because we probably move to another hslot
wrongly when lookup with concurrent rehash. Then we check nulls at the
list end to see if we should restart lookup. Because udp does not use
SLAB_TYPESAFE_BY_RCU, we don't need to touch sk_refcnt when lookup.
Stress test results (with 1 cpu fully used) are shown below, in pps:
(1) _un-connected_ socket as server
[a] w/o hash4: 1,825176
[b] w/ hash4: 1,831750 (+0.36%)
(2) 500 _connected_ sockets as server
[c] w/o hash4: 290860 (only 16% of [a])
[d] w/ hash4: 1,889658 (+3.1% compared with [b])
With hash4, compute_score is skipped when lookup, so [d] is slightly
better than [b].
Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com>
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com>
Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com>
Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new hash list, hash4, in udp table. It will be used to implement
4-tuple hash for connected udp sockets. This patch adds the hlist to
table, and implements helpers and the initialization. 4-tuple hash is
implemented in the following patch.
hash4 uses hlist_nulls to avoid moving wrongly onto another hlist due to
concurrent rehash, because rehash() can happen with lookup().
Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com>
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com>
Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com>
Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Preparing for udp 4-tuple hash (uhash4 for short).
To implement uhash4 without cache line missing when lookup, hslot2 is
used to record the number of hashed sockets in hslot4. Thus adding a new
struct udp_hslot_main with field hash4_cnt, which is used by hash2. The
new struct is used to avoid doubling the size of udp_hslot.
Before uhash4 lookup, firstly checking hash4_cnt to see if there are
hashed sks in hslot4. Because hslot2 is always used in lookup, there is
no cache line miss.
Related helpers are updated, and use the helpers as possible.
uhash4 is implemented in following patches.
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gemini Lake (Goldmont Plus) is an Apollo Lake (Goldmont) derived design and
as such has the P2SB at device.function 13.0, rather then at the default
31.1, just like Apollo Lake.
At a mapping to P2SB_DEVFN_GOLDMONT to p2sb_cpu_ids[] for Goldmont Plus,
so that the correct PCI bar gets cached.
This fixes P2SB unhiding not working on these devices, which fixes
SPI support for the bootrom SPI controller not working.
Fixes: 2841631a03 ("platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe")
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241116154546.85761-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
-----BEGIN PGP SIGNATURE-----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=Ioo8
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2024-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
ipsec-next-11-15
1) Add support for RFC 9611 per cpu xfrm state handling.
2) Add inbound and outbound xfrm state caches to speed up
state lookups.
3) Convert xfrm to dscp_t. From Guillaume Nault.
4) Fix error handling in build_aevent.
From Everest K.C.
5) Replace strncpy with strscpy_pad in copy_to_user_auth.
From Daniel Yang.
6) Fix an uninitialized symbol during acquire state insertion.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When an error occurs in sysfs show callback, we should return the errno
directly instead of formatting it as the result, which produces
meaningless output and doesn't inform the userspace of the error.
Fixes: 468f96bfa3 ("platform/x86: panasonic-laptop: Add support for battery charging threshold (eco mode)")
Fixes: d5a81d8e86 ("platform/x86: panasonic-laptop: Add support for optical driver power in Y and W series")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241118064637.61832-3-ziyao@disroot.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Due to recent changes on the way we're maintaining media, the
location of the main tree was updated.
Change docs accordingly.
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
There were some recent changes on the way we're handling
media patches. Now, the official tree is located at:
https://git.linuxtv.org/media.git/
Update it at MAINTAINERS file.
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
When using FUSE DAX with virtiofs, cache coherency is managed by the
host. Disk persistence is handled via fsync() and friends, which are
passed directly via the FUSE layer to the host. Therefore, there's no
need to do dax_writeback_mapping_range(). All that ends up doing is a
cache flush operation, which is not caught by KVM and doesn't do much,
since the host and guest are already cache-coherent.
Since dax_writeback_mapping_range() checks that the inode block size is
equal to PAGE_SIZE, this fixes a spurious WARN when virtiofs is used
with a mismatched guest PAGE_SIZE and virtiofs backing FS block size
(this happens, for example, when it's a tmpfs and the host and guest
have a different PAGE_SIZE). FUSE DAX does not require any particular FS
block size, since it always performs DAX mappings in aligned 2MiB
blocks.
See discussion in [1].
[1] https://lore.kernel.org/lkml/20241101-dax-page-size-v1-1-eedbd0c6b08f@asahilina.net/T/#u
[SzM: remove the empty callback]
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Function fuse_direntplus_link() might call fuse_iget() to initialize a new
fuse_inode and change its attributes. If fi->attr_version is always
initialized with 0, even if the attributes returned by the FUSE_READDIR
request is staled, as the new fi->attr_version is 0, fuse_change_attributes
will still set the staled attributes to inode. This wrong behaviour may
cause file size inconsistency even when there is no changes from
server-side.
To reproduce the issue, consider the following 2 programs (A and B) are
running concurrently,
A B
---------------------------------- --------------------------------
{ /fusemnt/dir/f is a file path in a fuse mount, the size of f is 0. }
readdir(/fusemnt/dir) start
//Daemon set size 0 to f direntry
fallocate(f, 1024)
stat(f) // B see size 1024
echo 2 > /proc/sys/vm/drop_caches
readdir(/fusemnt/dir) reply to kernel
Kernel set 0 to the I_NEW inode
stat(f) // B see size 0
In the above case, only program B is modifying the file size, however, B
observes file size changing between the 2 'readonly' stat() calls. To fix
this issue, we should make sure readdirplus still follows the rule of
attr_version staleness checking even if the fi->attr_version is lost due to
inode eviction.
To identify this situation, the new fc->evict_ctr is used to record whether
the eviction of inodes occurs during the readdirplus request processing.
If it does, the result of readdirplus may be inaccurate; otherwise, the
result of readdirplus can be trusted. Although this may still lead to
incorrect invalidation, considering the relatively low frequency of
evict occurrences, it should be acceptable.
Link: https://lore.kernel.org/lkml/20230711043405.66256-2-zhangjiachen.jaycee@bytedance.com/
Link: https://lore.kernel.org/lkml/20241114070905.48901-1-zhangtianci.1997@bytedance.com/
Reported-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Zhang Tianci <zhangtianci.1997@bytedance.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
abeoz9_rtc_read_alarm assumes we always read the alarm in 12-hour mode
while abeoz9_rtc_set_alarm will always set it in 24-hour mode.
We could support 12-hour mode in both functions but it seems very unlikely
that the RTC would be set to 12-hour mode now as the driver has been
setting it to 24-hour mode for a while now. The setting is undefined at
power-up and unchanged by subsequent resets which doesn't help us.
Link: https://lore.kernel.org/r/20241112151119.3451611-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Read RV3028_TS_COUNT in an unsigned int so static checkers stop reporting a
mismatch between the format specifier and the type.
Reported-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241111104711.3170865-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Currently, virtio uses its own dumb_map_offset implementation,
virtio_gpu_mode_dumb_mmap. It works similarly to generic implementation,
drm_gem_dumb_map_offset, and using the generic implementation is
preferable (and making drivers to do so is a task stated on the DRM
subsystem's TODO list).
Thus, make driver use the generic implementation. This includes
VIRTGPU_MAP ioctl so it cannot be used to circumvent rules imposed by
drm_gem_dumb_map_offset (imported objects cannot be mapped).
Signed-off-by: Peter Shkenev <mustela@erminea.space>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
[dmitry.osipenko@collabora.com: cosmetic code improvements]
Link: https://patchwork.freedesktop.org/patch/msgid/20241107141133.13624-1-mustela@erminea.space
tm_mon describes months from 0 to 11, but the register contains BCD from
1 to 12. tm_year contains years since 1900, but the BCD contains 20XX.
Apply the offsets when converting these numbers.
Fixes: deeb4b5393 ("rtc: rzn1: Add new RTC driver")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20241113113032.27409-1-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
