The newly added interface is broken when PRINTK is disabled:
drivers/tty/sysrq.c: In function '__handle_sysrq':
drivers/tty/sysrq.c:601:9: error: implicit declaration of function 'printk_force_console_enter' [-Wimplicit-function-declaration]
601 | printk_force_console_enter();
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/tty/sysrq.c:611:25: error: implicit declaration of function 'printk_force_console_exit' [-Wimplicit-function-declaration]
611 | printk_force_console_exit();
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Add empty stub functions for both.
Fixes: ed76c07c68 ("printk: Introduce FORCE_CON flag")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Tested-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Link: https://lore.kernel.org/r/20241112142939.724093-1-arnd@kernel.org
Signed-off-by: Petr Mladek <pmladek@suse.com>
This patch introduces the following changes:
- Adds OF match table.
- Hardcodes hid-report-addr in the driver rather than fetching it
from the device property.
Signed-off-by: Charles Wang <charles.goodix@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Goodix GT7986U touch controller report touch data according to the
HID protocol through the SPI bus. However, it is incompatible with
Microsoft's HID-over-SPI protocol.
NOTE: these bindings are distinct from the bindings used with the
GT7986U when the chip is running I2C firmware. For some background,
see discussion on the mailing lists in the thread:
https://lore.kernel.org/r/20241018020815.3098263-2-charles.goodix@gmail.com
Signed-off-by: Charles Wang <charles.goodix@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Interrupts can be routed to maximal four virtual CPUs with real HW
EIOINTC interrupt controller model, since interrupt routing is encoded
with CPU bitmap and EIOINTC node combined method. Here add the EIOINTC
virt extension support so that interrupts can be routed to 256 vCPUs in
virtual machine mode. CPU bitmap is replaced with normal encoding and
EIOINTC node type is removed, so there are 8 bits for cpu selection, at
most 256 vCPUs are supported for interrupt routing.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Enable the KVM_IRQ_ROUTING/KVM_IRQCHIP/KVM_MSI configuration items,
add the KVM_CAP_IRQCHIP capability, and implement the query interface
of the in-kernel irqchip.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Implement the communication interface between the user mode programs
and the kernel in PCHPIC interrupt control simulation, which is used
to obtain or send the simulation data of the interrupt controller in
the user mode process, and is also used in VM migration or VM saving
and restoration.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Implement the communication interface between the user mode programs
and the kernel in EIOINTC interrupt controller simulation, which is
used to obtain or send the simulation data of the interrupt controller
in the user mode process, and is also used in VM migration or VM saving
and restoration.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add implementation of EIOINTC interrupt controller's address space read
and write function simulation.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Implement the communication interface between the user mode programs
and the kernel in IPI interrupt controller simulation, which is used
to obtain or send the simulation data of the interrupt controller in
the user mode process, and is also used in VM migration or VM saving
and restoration.
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add implementation of IPI interrupt controller's address space read and
write function simulation.
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add iocsr and mmio memory read and write simulation to the kernel. When
the VM accesses the device address space through iocsr instructions or
mmio, it does not need to return to the qemu user mode but can directly
completes the access in the kernel mode.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The code for syncing vmalloc memory PGD pointers is using
atomic_read() in pair with atomic_set_release() but the
proper pairing is atomic_read_acquire() paired with
atomic_set_release().
This is done to clearly instruct the compiler to not
reorder the memcpy() or similar calls inside the section
so that we do not observe changes to init_mm. memcpy()
calls should be identified by the compiler as having
unpredictable side effects, but let's try to be on the
safe side.
Cc: stable@vger.kernel.org
Fixes: d31e23aff0 ("ARM: mm: make vmalloc_seq handling SMP safe")
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
When switching task, in addition to a dummy read from the new
VMAP stack, also do a dummy read from the VMAP stack's
corresponding KASAN shadow memory to sync things up in
the new MM context.
Cc: stable@vger.kernel.org
Fixes: a1c510d0ad ("ARM: implement support for vmap'ed stacks")
Link: https://lore.kernel.org/linux-arm-kernel/a1a1d062-f3a2-4d05-9836-3b098de9db6d@foss.st.com/
Reported-by: Clement LE GOFFIC <clement.legoffic@foss.st.com>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
When sync:ing the VMALLOC area to other CPUs, make sure to also
sync the KASAN shadow memory for the VMALLOC area, so that we
don't get stale entries for the shadow memory in the top level PGD.
Since we are now copying PGDs in two instances, create a helper
function named memcpy_pgd() to do the actual copying, and
create a helper to map the addresses of VMALLOC_START and
VMALLOC_END into the corresponding shadow memory.
Co-developed-by: Melon Liu <melon1335@163.com>
Cc: stable@vger.kernel.org
Fixes: 565cbaad83 ("ARM: 9202/1: kasan: support CONFIG_KASAN_VMALLOC")
Link: https://lore.kernel.org/linux-arm-kernel/a1a1d062-f3a2-4d05-9836-3b098de9db6d@foss.st.com/
Reported-by: Clement LE GOFFIC <clement.legoffic@foss.st.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
While forcing DSC when it is not actually required, the max compressed
bpp from the source gets picked for compression for some pipe bpps.
Apparently, when DSC is not required, forcing DSC to the maximum compressed
bpp seems to cause underruns.
To avoid this, limit the max compressed bpp to 18 while forcing DSC. This
value works across platforms with different pipe bpps and prevents
underruns.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Naga Venkata Srikanth V <nagavenkata.srikanth.v@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030084100.1361689-1-ankit.k.nautiyal@intel.com
If user no update BIOS, the speaker will no sound.
This patch support old BIOS to have sound from speaker.
Fixes: 1e707769df ("ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP EliteBook 645 G10 uses ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED and
micmute LED work.
Signed-off-by: Maksym Glubokiy <maxgl.kernel@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241112154815.10888-1-maxgl.kernel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are a few places in the kernel where PCI IDs for different Cadence
USB controllers are being used. Besides different naming, they duplicate
each other. Make this all in order by providing common definitions via
PCI IDs database and use in all users. While doing that, rename
definitions as Roger suggested.
Suggested-by: Roger Quadros <rogerq@kernel.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20241112160125.2340972-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The alg instance should be released under the exception path, otherwise
there may be resource leak here.
To mitigate this, free the alg instance with crypto_free_shash when kmalloc
fails.
Fixes: 02fe26f253 ("firmware_loader: Add debug message with checksum for FW file")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Russ Weight <russ.weight@linux.dev>
Link: https://lore.kernel.org/r/20241016110335.3677924-1-cuigaosheng1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently if the maximum-speed is set to Super Speed for a 3.1 Gen2
capable controller, the FORCE_GEN1 bit of LLUCTL register is set only
for one SuperSpeed port (or the first port) present. Modify the logic
to set the FORCE_GEN1 bit for all ports if speed is being limited to
Gen-1.
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20241112182018.199392-1-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The existing implementation of the TxFIFO resizing logic only supports
scenarios where more than one port RAM is used. However, there is a need
to resize the TxFIFO in USB2.0-only mode where only a single port RAM is
available. This commit introduces the necessary changes to support
TxFIFO resizing in such scenarios by adding a missing check for single
port RAM.
This fix addresses certain platform configurations where the existing
TxFIFO resizing logic does not work properly due to the absence of
support for single port RAM. By adding this missing check, we ensure
that the TxFIFO resizing logic works correctly in all scenarios,
including those with a single port RAM.
Fixes: 9f607a309f ("usb: dwc3: Resize TX FIFOs to meet EP bursting requirements")
Cc: stable@vger.kernel.org # 6.12.x: fad16c82: usb: dwc3: gadget: Refine the logic for resizing Tx FIFOs
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20241112044807.623-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The b_frozen_data allocation should not be failed during journal
committing process, otherwise jbd2 will abort.
Since commit 490c1b444ce653d("jbd2: do not fail journal because of
frozen_buffer allocation failure") already added '__GFP_NOFAIL' flag
in do_get_write_access(), just add '__GFP_NOFAIL' flag for all allocations
in jbd2_journal_write_metadata_buffer(), like 'new_bh' allocation does.
Besides, remove all error handling branches for do_get_write_access().
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20241012085530.2147846-1-chengzhihao@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The variables "&EXT4_SB(inode->i_sb)->s_fc_lock" and "&sbi->s_fc_lock"
are the same lock. This function uses a mix of both, which is a bit
unsightly and confuses Smatch.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/96008557-8ff4-44cc-b5e3-ce242212f1a3@stanley.mountain
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Keep 'success' internally to track if any error happened and then
return it at the end in do_one_pass(). If jbd2_do_replay() return
-ENOMEM then stop replay journal.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240930005942.626942-7-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The judgement 'if (block_error && success == 0)' is never valid. Just
remove useless 'block_error' variable.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240930005942.626942-6-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out jbd2_do_replay() no funtional change.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240930005942.626942-5-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
To make JBD2_COMMIT_BLOCK process more clean, no functional change.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240930005942.626942-4-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now buffer_head free is very fragmented in do_one_pass(), unified release
of buffer_head in do_one_pass()
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240930005942.626942-3-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
'need_check_commit_time' is only used by v2/v3 checksum, so there isn't
need to add 'need_check_commit_time' judegement for v1 checksum logic.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240930005942.626942-2-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Instead of directly casting and returning an error-valued pointer,
use ERR_CAST to make the error handling more explicit and improve
code clarity.
Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
Link: https://patch.msgid.link/20240920021440.1959243-1-yujiaoliang@vivo.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
On some filesystems, it is currently possible to create a transient
data inconsistency between pagecache and on-disk state. For example,
on a 1k block size ext4 filesystem:
$ xfs_io -fc "pwrite 0 2k" -c "mmap 0 4k" -c "mwrite 2k 2k" \
-c "truncate 8k" -c "fiemap -v" -c "pread -v 2k 16" <file>
...
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..3]: 17410..17413 4 0x1
1: [4..15]: hole 12
00000800: 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 XXXXXXXXXXXXXXXX
$ umount <mnt>; mount <dev> <mnt>
$ xfs_io -c "pread -v 2k 16" <file>
00000800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
This allocates and writes two 1k blocks, map writes to the post-eof
portion of the (4k) eof folio, extends the file, and then shows that
the post-eof data is not cleared before the file size is extended.
The result is pagecache with a clean and uptodate folio over a hole
that returns non-zero data. Once reclaimed, pagecache begins to
return valid data.
Some filesystems avoid this problem by flushing the EOF folio before
inode size extension. This triggers writeback time partial post-eof
zeroing. XFS explicitly zeroes newly exposed file ranges via
iomap_zero_range(), but this includes a hack to flush dirty but
hole-backed folios, which means writeback actually does the zeroing
in this particular case as well. bcachefs explicitly flushes the eof
folio on truncate extension to the same effect, but doesn't handle
the analogous write extension case (i.e., replace "truncate 8k" with
"pwrite 4k 4k" in the above example command to reproduce the same
problem on bcachefs). btrfs doesn't seem to support subpage block
sizes.
The two main options to avoid this behavior are to either flush or
do the appropriate zeroing during size extending operations. Zeroing
is only required when the size change exposes ranges of the file
that haven't been directly written, such as a write or truncate that
starts beyond the current eof. The pagecache_isize_extended() helper
is already used for this particular scenario. It currently cleans
any pte's for the eof folio to ensure preexisting mappings fault and
allow the filesystem to take action based on the updated inode size.
This is required to ensure the folio is fully backed by allocated
blocks, for example, but this also happens to be the same scenario
zeroing is required.
Update pagecache_isize_extended() to zero the post-eof range of the
eof folio if it is dirty at the time of the size change, since
writeback now won't have the chance. If non-dirty, the folio has
either not been written or the post-eof portion was zeroed by
writeback.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://patch.msgid.link/20240919160741.208162-3-bfoster@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Using mapped writes, it's technically possible to expose stale
post-eof data on a truncate up operation. Consider the following
example:
$ xfs_io -fc "pwrite 0 2k" -c "mmap 0 4k" -c "mwrite 2k 2k" \
-c "truncate 8k" -c "pread -v 2k 16" <file>
...
00000800: 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 XXXXXXXXXXXXXXXX
...
This shows that the post-eof data written via mwrite lands within
EOF after a truncate up. While this is deliberate of the test case,
behavior is somewhat unpredictable because writeback does post-eof
zeroing, and writeback can occur at any time in the background. For
example, an fsync inserted between the mwrite and truncate causes
the subsequent read to instead return zeroes. This basically means
that there is a race window in this situation between any subsequent
extending operation and writeback that dictates whether post-eof
data is exposed to the file or zeroed.
To prevent this problem, perform partial block zeroing as part of
the various inode size extending operations that are susceptible to
it. For truncate extension, zero around the original eof similar to
how truncate down does partial zeroing of the new eof. For extension
via writes and fallocate related operations, zero the newly exposed
range of the file to cover any partial zeroing that must occur at
the original and new eof blocks.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://patch.msgid.link/20240919160741.208162-2-bfoster@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The commit 91562895f8 ("ext4: properly sync file size update after O_SYNC
direct IO") causes confusion about the meaning of the return value of
ext4_dio_write_end_io().
Specifically, when the ext4_handle_inode_extension() operation succeeds,
ext4_dio_write_end_io() directly returns count instead of 0.
This does not cause a bug in the current kernel, but the semantics of the
return value of the ext4_dio_write_end_io() function are wrong, which is
likely to introduce bugs in the future code evolution.
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240919082539.381626-1-alexjlzheng@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 449813515d ("block, fs: Restore the per-bio/request data
lifetime fields") restored write-hint support in ext4. But that is
applicable only for direct IO. This patch supports passing
write-hint for buffered IO from ext4 file system to block layer
by filling bi_write_hint of struct bio in io_submit_add_bh().
Signed-off-by: j.xia <j.xia@samsung.com>
Link: https://patch.msgid.link/20240919020341.2657646-1-j.xia@samsung.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When I enabled ext4 debug for fault injection testing, I encountered the
following warning:
EXT4-fs error (device sda): ext4_read_inode_bitmap:201: comm fsstress:
Cannot read inode bitmap - block_group = 8, inode_bitmap = 1051
WARNING: CPU: 0 PID: 511 at fs/buffer.c:1181 mark_buffer_dirty+0x1b3/0x1d0
The root cause of the issue lies in the improper implementation of ext4's
buffer_head read fault injection. The actual completion of buffer_head
read and the buffer_head fault injection are not atomic, which can lead
to the uptodate flag being cleared on normally used buffer_heads in race
conditions.
[CPU0] [CPU1] [CPU2]
ext4_read_inode_bitmap
ext4_read_bh()
<bh read complete>
ext4_read_inode_bitmap
if (buffer_uptodate(bh))
return bh
jbd2_journal_commit_transaction
__jbd2_journal_refile_buffer
__jbd2_journal_unfile_buffer
__jbd2_journal_temp_unlink_buffer
ext4_simulate_fail_bh()
clear_buffer_uptodate
mark_buffer_dirty
<report warning>
WARN_ON_ONCE(!buffer_uptodate(bh))
The best approach would be to perform fault injection in the IO completion
callback function, rather than after IO completion. However, the IO
completion callback function cannot get the fault injection code in sb.
Fix it by passing the result of fault injection into the bh read function,
we simulate faults within the bh read function itself. This requires adding
an extra parameter to the bh read functions that need fault injection.
Fixes: 46f870d690 ("ext4: simulate various I/O and checksum errors when reading metadata")
Signed-off-by: Long Li <leo.lilong@huawei.com>
Link: https://patch.msgid.link/20240906091746.510163-1-leo.lilong@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When converting a delalloc extent in ext4_es_insert_extent(), since we
only want to pass the info of whether the quota has already been claimed
if the allocation is a direct allocation from ext4_map_create_blocks(),
there is no need to pass full mapping flags, so changes to just pass
whether the EXT4_GET_BLOCKS_DELALLOC_RESERVE bit is set.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240906061401.2980330-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When ctx_set_flags() is unused, it prevents kernel builds
with clang, `make W=1` and CONFIG_WERROR=y:
.../ext4/super.c:2120:1: error: unused function 'ctx_set_flags' [-Werror,-Wunused-function]
2120 | EXT4_SET_CTX(flags); /* set only */
| ^~~~~~~~~~~~~~~~~~~
Fix this by marking ctx_*_flags() with __maybe_unused
(mark both for the sake of symmetry).
See also commit 6863f5643d ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240905163229.140522-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
cma_alloc() keep failed in our system which thanks to a jh->bh->b_page
can not be migrated out of CMA area[1] as the jh has one cp_transaction
pending on it because of j_free > j_max_transaction_buffers[2][3][4][5][6].
We temporarily solve this by launching jbd2_log_do_checkpoint forcefully
somewhere. Since journal is common mechanism to all JFSs and
cp_transaction has a little fewer opportunity to be launched, the
cma_alloc() could be affected under the same scenario. This patch
would like to have buffer_head of ext4 not use CMA pages when doing
sb_getblk.
[1]
crash_arm64_v8.0.4++> kmem -p|grep ffffff808f0aa150(sb->s_bdev->bd_inode->i_mapping)
fffffffe01a51c00 e9470000 ffffff808f0aa150 3 2 8000000008020 lru,private
fffffffe03d189c0 174627000 ffffff808f0aa150 4 2 2004000000008020 lru,private
fffffffe03d88e00 176238000 ffffff808f0aa150 3f9 2 2008000000008020 lru,private
fffffffe03d88e40 176239000 ffffff808f0aa150 6 2 2008000000008020 lru,private
fffffffe03d88e80 17623a000 ffffff808f0aa150 5 2 2008000000008020 lru,private
fffffffe03d88ec0 17623b000 ffffff808f0aa150 1 2 2008000000008020 lru,private
fffffffe03d88f00 17623c000 ffffff808f0aa150 0 2 2008000000008020 lru,private
fffffffe040e6540 183995000 ffffff808f0aa150 3f4 2 2004000000008020 lru,private
[2] page -> buffer_head
crash_arm64_v8.0.4++> struct page.private fffffffe01a51c00 -x
private = 0xffffff802fca0c00
[3] buffer_head -> journal_head
crash_arm64_v8.0.4++> struct buffer_head.b_private 0xffffff802fca0c00
b_private = 0xffffff8041338e10,
[4] journal_head -> b_cp_transaction
crash_arm64_v8.0.4++> struct journal_head.b_cp_transaction 0xffffff8041338e10 -x
b_cp_transaction = 0xffffff80410f1900,
[5] transaction_t -> journal
crash_arm64_v8.0.4++> struct transaction_t.t_journal 0xffffff80410f1900 -x
t_journal = 0xffffff80e70f3000,
[6] j_free & j_max_transaction_buffers
crash_arm64_v8.0.4++> struct journal_t.j_free,j_max_transaction_buffers 0xffffff80e70f3000 -x
j_free = 0x3f1,
j_max_transaction_buffers = 0x100,
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240904075300.1148836-1-zhaoyang.huang@unisoc.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The original implementation ext4's FS_IOC_GETFSMAP handling only
worked when the range of queried blocks included at least one free
(unallocated) block range. This is because how the metadata blocks
were emitted was as a side effect of ext4_mballoc_query_range()
calling ext4_getfsmap_datadev_helper(), and that function was only
called when a free block range was identified. As a result, this
caused generic/365 to fail.
Fix this by creating a new function ext4_getfsmap_meta_helper() which
gets called so that blocks before the first free block range in a
block group can get properly reported.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
