Commit 1e562deace ("crypto: rsassa-pkcs1 - Migrate to sig_alg backend")
enforced that rsassa-pkcs1 sign/verify operations specify a hash
algorithm. That is necessary because per RFC 8017 sec 8.2, a hash
algorithm identifier must be prepended to the hash before generating or
verifying the signature ("Full Hash Prefix").
However the commit went too far in that it changed user space behavior:
KEYCTL_PKEY_QUERY system calls now return -EINVAL unless they specify a
hash algorithm. Intel Wireless Daemon (iwd) is one application issuing
such system calls (for EAP-TLS).
Closer analysis of the Embedded Linux Library (ell) used by iwd reveals
that the problem runs even deeper: When iwd uses TLS 1.1 or earlier, it
not only queries for keys, but performs sign/verify operations without
specifying a hash algorithm. These legacy TLS versions concatenate an
MD5 to a SHA-1 hash and omit the Full Hash Prefix:
https://git.kernel.org/pub/scm/libs/ell/ell.git/tree/ell/tls-suites.c#n97
TLS 1.1 was deprecated in 2021 by RFC 8996, but removal of support was
inadvertent in this case. It probably should be coordinated with iwd
maintainers first.
So reinstate support for such legacy protocols by defaulting to hash
algorithm "none" which uses an empty Full Hash Prefix.
If it is later on decided to remove TLS 1.1 support but still allow
KEYCTL_PKEY_QUERY without a hash algorithm, that can be achieved by
reverting the present commit and replacing it with the following patch:
https://lore.kernel.org/r/ZxalYZwH5UiGX5uj@wunner.de/
It's worth noting that Python's cryptography library gained support for
such legacy use cases very recently, so they do seem to still be a thing.
The Python developers identified IKE version 1 as another protocol
omitting the Full Hash Prefix:
https://github.com/pyca/cryptography/issues/10226https://github.com/pyca/cryptography/issues/5495
The author of those issues, Zoltan Kelemen, spent considerable effort
searching for test vectors but only found one in a 2019 blog post by
Kevin Jones. Add it to testmgr.h to verify correctness of this feature.
Examination of wpa_supplicant as well as various IKE daemons (libreswan,
strongswan, isakmpd, raccoon) has determined that none of them seems to
use the kernel's Key Retention Service, so iwd is the only affected user
space application known so far.
Fixes: 1e562deace ("crypto: rsassa-pkcs1 - Migrate to sig_alg backend")
Reported-by: Klara Modin <klarasmodin@gmail.com>
Tested-by: Klara Modin <klarasmodin@gmail.com>
Closes: https://lore.kernel.org/r/2ed09a22-86c0-4cf0-8bda-ef804ccb3413@gmail.com/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In case of an early failure in dasd_init, dasd_proc_init is never
called and /proc/dasd* files are never created. That can happen, for
example, if an incompatible or incorrect argument is provided to the
dasd_mod.dasd= kernel parameter.
However, the attempted removal of /proc/dasd* files causes 8 warnings
and backtraces in this case. 4 on the error path within dasd_init and
4 when the dasd module is unloaded. Notice the "removing permanent
/proc entry 'devices'" message that is caused by the dasd_proc_exit
function trying to remove /proc/devices instead of /proc/dasd/devices
since dasd_proc_root_entry is NULL and /proc/devices is indeed
permanent. Example:
------------[ cut here ]------------
removing permanent /proc entry 'devices'
WARNING: CPU: 6 PID: 557 at fs/proc/generic.c:701 remove_proc_entry+0x22e/0x240
CPU: 6 PID: 557 Comm: modprobe Not tainted 6.10.5-1-default #1
openSUSE Tumbleweed f6917bfd6e5a5c7a7e900e0e3b517786fb5c6301
Hardware name: QEMU 8561 QEMU (KVM/Linux)
Krnl PSW : 0704c00180000000 000003fffed0e9f2 (remove_proc_entry+0x232/0x240)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
Krnl GPRS: 000003ff00000027 000003ff00000023 0000000000000028 000002f200000000
000002f3f05bec20 0000037ffecfb7d0 000003ffffdabab0 000003ff7ee4ec72
000003ff7ee4ec72 0000000000000007 000002f280e22600 000002f280e22688
000003ffa252cfa0 0000000000010000 000003fffed0e9ee 0000037ffecfba38
Krnl Code: 000003fffed0e9e2: c020004e7017 larl %r2,000003ffff6dca10
000003fffed0e9e8: c0e5ffdfad24 brasl %r14,000003fffe904430
#000003fffed0e9ee: af000000 mc 0,0
>000003fffed0e9f2: a7f4ff4c brc 15,000003fffed0e88a
000003fffed0e9f6: 0707 bcr 0,%r7
000003fffed0e9f8: 0707 bcr 0,%r7
000003fffed0e9fa: 0707 bcr 0,%r7
000003fffed0e9fc: 0707 bcr 0,%r7
Call Trace:
[<000003fffed0e9f2>] remove_proc_entry+0x232/0x240
([<000003fffed0e9ee>] remove_proc_entry+0x22e/0x240)
[<000003ff7ef5a084>] dasd_proc_exit+0x34/0x60 [dasd_mod]
[<000003ff7ef560c2>] dasd_exit+0x22/0xc0 [dasd_mod]
[<000003ff7ee5a26e>] dasd_init+0x26e/0x280 [dasd_mod]
[<000003fffe8ac9d0>] do_one_initcall+0x40/0x220
[<000003fffe9bc758>] do_init_module+0x78/0x260
[<000003fffe9bf3a6>] __do_sys_init_module+0x216/0x250
[<000003ffff37ac9e>] __do_syscall+0x24e/0x2d0
[<000003ffff38cca8>] system_call+0x70/0x98
Last Breaking-Event-Address:
[<000003fffef7ea20>] __s390_indirect_jump_r14+0x0/0x10
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
While the cause is a user failure, the dasd module should handle the
situation more gracefully. One of the simplest solutions is to make
removal of the /proc/dasd* entries idempotent.
Signed-off-by: Miroslav Franc <mfranc@suse.cz>
[ sth: shortened if clause ]
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20241108133913.3068782-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull raid5 fix from Song.
* tag 'md-6.13-20241107' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
MAINTAINERS: Make Yu Kuai co-maintainer of md/raid subsystem
md/raid5: Wait sync io to finish before changing group cnt
PAGE_SIZE may be 64K, and the max block size can be PAGE_SIZE, so any
variable for holding block size can't be defined as 'unsigned short'.
Unfortunately commit 473516b361 ("loop: use the atomic queue limits
update API") passes 'bsize' with type of 'unsigned short' to
loop_reconfigure_limits(), and causes LTP/ioctl_loop06 test failure:
12 ioctl_loop06.c:76: TINFO: Using LOOP_SET_BLOCK_SIZE with arg > PAGE_SIZE
13 ioctl_loop06.c:59: TFAIL: Set block size succeed unexpectedly
...
18 ioctl_loop06.c:76: TINFO: Using LOOP_CONFIGURE with block_size > PAGE_SIZE
19 ioctl_loop06.c:59: TFAIL: Set block size succeed unexpectedly
Fixes the issue by defining 'block size' variable with 'unsigned int', which is
aligned with block layer's definition.
(improve commit log & add fixes tag)
Fixes: 473516b361 ("loop: use the atomic queue limits update API")
Cc: John Garry <john.g.garry@oracle.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Li Wang <liwang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241109022744.1126003-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 03e02b9417.
As was pointed out during code review, there is no need to use
folio_attach_private()/folio_detach_private() when a refcount to the
folio is already carried by the struct nfs_page.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the power supply type is not set it defaults to "Unknown" and upower
does not recognise it. In turn battery monitor applications do not see a
battery. Setting to POWER_SUPPLY_TYPE_BATTERY fixes this.
Signed-off-by: Ed Robbins <edd.robbins@gmail.com>
Link: https://lore.kernel.org/r/IOFJLS.120OJ5KJG9R72@googlemail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Otherwise memory corruption can occur due to NFSv3 LOCALIO reads
leaving garbage in res.replen:
- nfs3_read_done() copies that into server->read_hdrsize; from there
nfs3_proc_read_setup() copies it to args.replen in new requests.
- nfs3_xdr_enc_read3args() passes that to rpc_prepare_reply_pages()
which includes it in hdrsize for xdr_init_pages, so that rq_rcv_buf
contains a ridiculous len.
- This is copied to rq_private_buf and xs_read_stream_request()
eventually passes the kvec to sock_recvmsg() which receives incoming
data into entirely the wrong place.
This is easily reproduced with NFSv3 LOCALIO that is servicing reads
when it is made to pivot back to using normal RPC. This switch back
to using normal NFSv3 with RPC can occur for a few reasons but this
issue was exposed with a test that stops and then restarts the NFSv3
server while LOCALIO is performing heavy read IO.
Fixes: 70ba381e1a ("nfs: add LOCALIO support")
Reported-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Co-developed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
It is currently impossible to delete individual FDB entries (as opposed
to flushing) that were added with a VLAN that no longer exists:
# ip link add name dummy1 up type dummy
# ip link add name br1 up type bridge vlan_filtering 1
# ip link set dev dummy1 master br1
# bridge fdb add 00:11:22:33:44:55 dev dummy1 master static vlan 1
# bridge vlan del vid 1 dev dummy1
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static
# bridge fdb del 00:11:22:33:44:55 dev dummy1 master vlan 1
RTNETLINK answers: Invalid argument
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static
This is in contrast to MDB entries that can be deleted after the VLAN
was deleted:
# bridge vlan add vid 10 dev dummy1
# bridge mdb add dev br1 port dummy1 grp 239.1.1.1 permanent vid 10
# bridge vlan del vid 10 dev dummy1
# bridge mdb get dev br1 grp 239.1.1.1 vid 10
dev br1 port dummy1 grp 239.1.1.1 permanent vid 10
# bridge mdb del dev br1 port dummy1 grp 239.1.1.1 permanent vid 10
# bridge mdb get dev br1 grp 239.1.1.1 vid 10
Error: bridge: MDB entry not found.
Align the two interfaces and allow user space to delete FDB entries that
were added with a VLAN that no longer exists:
# ip link add name dummy1 up type dummy
# ip link add name br1 up type bridge vlan_filtering 1
# ip link set dev dummy1 master br1
# bridge fdb add 00:11:22:33:44:55 dev dummy1 master static vlan 1
# bridge vlan del vid 1 dev dummy1
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static
# bridge fdb del 00:11:22:33:44:55 dev dummy1 master vlan 1
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
Error: Fdb entry not found.
Add a selftest to make sure this behavior does not regress:
# ./rtnetlink.sh -t kci_test_fdb_del
PASS: bridge fdb del
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Andy Roulin <aroulin@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241105133954.350479-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the mlx5_eq_comp_int() interrupt handler schedules a tasklet
to call mlx5_cq_tasklet_cb() if it processes any completions. For CQs
whose completions don't need to be processed in tasklet context, this
adds unnecessary overhead. In a heavy TCP workload, we see 4% of CPU
time spent on the tasklet_trylock() in tasklet_action_common(), with a
smaller amount spent on the atomic operations in tasklet_schedule(),
tasklet_clear_sched(), and locking the spinlock in mlx5_cq_tasklet_cb().
TCP completions are handled by mlx5e_completion_event(), which schedules
NAPI to poll the queue, so they don't need tasklet processing.
Schedule the tasklet in mlx5_add_cq_to_tasklet() instead to avoid this
overhead. mlx5_add_cq_to_tasklet() is responsible for enqueuing the CQs
to be processed in tasklet context, so it can schedule the tasklet. CQs
that need tasklet processing have their interrupt comp handler set to
mlx5_add_cq_to_tasklet(), so they will schedule the tasklet. CQs that
don't need tasklet processing won't schedule the tasklet. To avoid
scheduling the tasklet multiple times during the same interrupt, only
schedule the tasklet in mlx5_add_cq_to_tasklet() if the tasklet work
queue was empty before the new CQ was pushed to it.
The additional branch in mlx5_add_cq_to_tasklet(), called for each EQE,
may add a small cost for the userspace Infiniband CQs whose completions
are processed in tasklet context. But this seems worth it to avoid the
tasklet overhead for CQs that don't need it.
Note that the mlx4 driver works the same way: it schedules the tasklet
in mlx4_add_cq_to_tasklet() and only if the work queue was empty before.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://patch.msgid.link/20241105204000.1807095-1-csander@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 55d42a0c3f ("selftests: net: add a test for closing
a netlink socket ith dump in progress") added a new test
but did not add it to gitignore.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241108004731.2979878-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'state' can't be NULL, we should check crtc_state.
Fix warning:
drivers/gpu/drm/rockchip/rockchip_drm_vop.c:1096
vop_plane_atomic_async_check() warn: variable dereferenced before check
'state' (see line 1077)
Fixes: 5ddb0bd4dd ("drm/atomic: Pass the full state to planes async atomic check and update")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021072818.61621-1-andyshrk@163.com
In designware an incorrect behavior has been fixes when
concluding a transmission.
Fixed return error value evaluation in the Mule multiplexer.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCZy5V7xYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1uXX8A/1lNym7o2X4Ljei8GALbbXYtuJBd
VNP+ARWZenH1QAgIAQDrNLIauSPNnFbD2RCm+mZGVlcY8I0JC7Fp6fOzOoEYCg==
=shLT
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-fixes-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host fixes for v6.12-rc7
In designware an incorrect behavior has been fixes when
concluding a transmission.
Fixed return error value evaluation in the Mule multiplexer.
Add support for gamma LUT in VOP2 driver. The implementation was inspired
by one found in VOP1 driver. Blue and red channels in gamma LUT register
write were swapped with respect to how gamma LUT values are written in
VOP1. Gamma LUT port selection was added before the write of new gamma LUT
table.
If the current SoC is rk356x, check if no other CRTC has gamma LUT enabled
in atomic_check (only one video port can use gamma LUT at a time) and
disable gamma LUT before the LUT table write.
If the current SoC isn't rk356x, "seamless" gamma lut update is performed
similarly to how it was done in the case of RK3399 in VOP1[1]. In seamless
update gamma LUT disable before the write isn't necessary, check if no
other CRTC has gamma LUT enabled is also not necessary, different register
is being used to select gamma LUT port[2] and after setting DSP_LUT_EN bit,
GAMMA_UPDATE_EN bit is set[3].
Gamma size is set and drm color management is enabled for each video port's
CRTC except ones which have no associated device.
Patch was tested on RK3566 (Pinetab2). When using userspace tools
which set eg. constant color temperature no issues were noticed. When
using userspace tools which adjust eg. color temperature the slight screen
flicker is visible probably because of gamma LUT disable needed in the
case of RK356x before gamma LUT write.
Compare behaviour of eg.:
```
gammastep -O 3000
```
To eg.:
```
gammastep -l 53:23 -t 6000:3000
```
In latter case color temperature is slowly adjusted at the beginning which
causes screen to slighly flicker. Then it adjusts every few seconds which
also causes slight screen flicker.
[1] https://lists.infradead.org/pipermail/linux-rockchip/2021-October/028132.html
[2] https://lore.kernel.org/linux-rockchip/48249708-8c05-40d2-a5d8-23de960c5a77@rock-chips.com/
[3] https://github.com/radxa/kernel/blob/linux-6.1-stan-rkr1/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c#L3437
Helped-by: Daniel Stone <daniel@fooishbar.org>
Helped-by: Dragan Simic <dsimic@manjaro.org>
Helped-by: Diederik de Haas <didi.debian@cknow.org>
Helped-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Piotr Zalewski <pZ010001011111@proton.me>
Reviewed-by: Andy Yan <andyshrk@163.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241101185545.559090-3-pZ010001011111@proton.me
The code for detecting and updating the connector status in
cdn_dp_pd_event_work() has a number of problems.
- It does not aquire the locks to call the detect helper and update
the connector status. These are struct drm_mode_config.connection_mutex
and struct drm_mode_config.mutex.
- It does not use drm_helper_probe_detect(), which helps with the
details of locking and detection.
- It uses the connector's status field to determine a change to
the connector status. The epoch_counter field is the correct one. The
field signals a change even if the connector status' value did not
change.
Replace the code with a call to drm_connector_helper_hpd_irq_event(),
which fixes all these problems.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 81632df697 ("drm/rockchip: cdn-dp: do not use drm_helper_hpd_irq_event")
Cc: Chris Zhong <zyw@rock-chips.com>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105133848.480407-1-tzimmermann@suse.de
The tx_bytes should consider the actual size of the Ethernet frames
without the SPI encapsulation. But we still need to take care of
Ethernet padding.
Fixes: 2f207cbf0d ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20241108114343.6174-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gilad Naaman says:
====================
Improve neigh_flush_dev performance
This patchsets improves the performance of neigh_flush_dev.
Currently, the only way to implement it requires traversing
all neighbours known to the kernel, across all network-namespaces.
This means that some flows are slowed down as a function of neigh-scale,
even if the specific link they're handling has little to no neighbours.
In order to solve this, this patchset adds a netdev->neighbours list,
as well as making the original linked-list doubly-, so that it is
possible to unlink neighbours without traversing the hash-bucket to
obtain the previous neighbour.
The original use-case we encountered was mass-deletion of links (12K
VLANs) while there are 50K ARPs and 50K NDPs in the system; though the
slowdowns would also appear when the links are set down.
====================
Link: https://patch.msgid.link/20241107160444.2913124-1-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a mapping between a netdev and its neighoburs,
allowing for much cheaper flushes.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241107160444.2913124-7-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove all usage of the bare neighbour::next pointer,
replacing them with neighbour::hash and its for_each macro.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-5-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert seq_file-related neighbour functionality to use neighbour::hash
and the related for_each macro.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-4-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce neigh_for_each_in_bucket in neighbour.h, to help iterate over
the neighbour table more succinctly.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-3-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a doubly-linked node to neighbours, so that they
can be deleted without iterating the entire bucket they're in.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-2-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vendor drivers r8125/r8126 apply this additional magic setting when
enabling WAKE_PHY, so do the same here.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/51130715-45be-4db5-abb7-05d87e1f5df9@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make use of new helper r8169_mod_reg8_cond() and move from a switch()
to an if() clause. Benefit is that we don't have to touch this piece of
code each time support for a new chip version is added.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/e1ccdb85-a4ed-4800-89c2-89770ff06452@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ZzcZ
-----END PGP SIGNATURE-----
Merge tag 'v6.12-rc6-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fix from Steve French:
"Fix net namespace refcount use after free issue"
* tag 'v6.12-rc6-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: Fix use-after-free of network namespace.
-----BEGIN PGP SIGNATURE-----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=v8nG
-----END PGP SIGNATURE-----
Merge tag 'block-6.12-20241108' of git://git.kernel.dk/linux
Pull block fix from Jens Axboe:
"Single fix for an issue triggered with PROVE_RCU=y, with nvme using
the wrong iterators for an SRCU protected list"
* tag 'block-6.12-20241108' of git://git.kernel.dk/linux:
nvme/host: Fix RCU list traversal to use SRCU primitive
sched_ext dispatches tasks from the BPF scheduler from balance_scx() and
thus every pick_task_scx() call must be preceded by balance_scx(). While
this usually holds, due to a bug, there are cases where the fair class's
balance() returns true indicating that it has tasks to run on the CPU and
thus terminating balance() calls but fails to actually find the next task to
run when pick_task() is called. In such cases, pick_task_scx() can be called
without preceding balance_scx().
Detect this condition using SCX_RQ_BAL_PENDING flags. If detected, keep
running the previous task if possible and avoid stalling from entering idle
without balancing.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/Ztj_h5c2LYsdXYbA@slm.duckdns.org
4c30f5ce4f ("sched_ext: Implement scx_bpf_dispatch[_vtime]_from_dsq()")
added four kfuncs for dispatching while iterating. They are allowed from the
dispatch and unlocked contexts but two of the kfuncs were only added in the
dispatch section. Add missing declarations in the unlocked section.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 4c30f5ce4f ("sched_ext: Implement scx_bpf_dispatch[_vtime]_from_dsq()")
Do not walk through the domain hierarchy when the required scope is not
supported by this domain. This is the same approach as for filesystem
and network restrictions.
Cc: Mikhail Ivanov <ivanov.mikhail1@huawei-partners.com>
Cc: Tahera Fahimi <fahimitahera@gmail.com>
Reviewed-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20241109110856.222842-4-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Replace get_raw_handled_fs_accesses() with a generic
landlock_union_access_masks(), and replace get_fs_domain() with a
generic landlock_get_applicable_domain(). These helpers will also be
useful for other types of access.
Cc: Mikhail Ivanov <ivanov.mikhail1@huawei-partners.com>
Reviewed-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20241109110856.222842-2-mic@digikod.net
[mic: Slightly improve doc as suggested by Günther]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
The preferred nodename for fixed-regulators has changed to
pattern: '^regulator(-[0-9]+v[0-9]+|-[0-9a-z-]+)?$'
Fix all Rockchip DT regulator nodenames.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/cfc3cfe1-086b-48f1-9b89-f17c9391d3cc@gmail.com
[Also include the backlight-regulator and panel-regulator from
rk3288-veyron-edp, and adapt the Pinky device accordingly]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Fix spelling of "probability" in tc.yaml documentation. This corrects
the max-P field description in struct tc_sfq_qopt_v1.
Signed-off-by: Abhinav Saxena <xandfury@gmail.com>
Link: https://patch.msgid.link/20241108195642.139315-1-xandfury@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When hvs is released, there is a possibility that vsk->trans may not
be initialized to NULL, which could lead to a dangling pointer.
This issue is resolved by initializing vsk->trans to NULL.
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/Zys4hCj61V+mQfX2@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the pointer. Cleans up the code quite well.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20241105231855.235894-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The variable has already been assigned in the subflow_create_ctx(),
So we don't need to reassign this variable in the subflow_ulp_clone().
Signed-off-by: MoYuanhao <moyuanhao3676@163.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241106071035.2591-1-moyuanhao3676@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MCTP control protocol implementations are transport binding dependent.
Endpoint discovery is mandatory based on transport binding.
Message timing requirements are specified in each respective transport
binding specification.
However, we currently have no means to get this information from MCTP
links.
Add a IFLA_MCTP_PHYS_BINDING netlink link attribute, which represents
the transport type using the DMTF DSP0239-defined type numbers, returned
as part of RTM_GETLINK data.
We get an IFLA_MCTP_PHYS_BINDING attribute for each MCTP link, for
example:
- 0x00 (unspec) for loopback interface;
- 0x01 (SMBus/I2C) for mctpi2c%d interfaces; and
- 0x05 (serial) for mctpserial%d interfaces.
Signed-off-by: Khang Nguyen <khangng@os.amperecomputing.com>
Reviewed-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://patch.msgid.link/20241105071915.821871-1-khangng@os.amperecomputing.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
scf_handler() is used as a SMP function call. This function is always
invoked in IRQ-context even with forced-threading enabled. This function
frees memory which not allowed on PREEMPT_RT because the locking
underneath is using sleeping locks.
Add a per-CPU scf_free_pool where each SMP functions adds its memory to
be freed. This memory is then freed by scftorture_invoker() on each
iteration. On the majority of invocations the number of items is less
than five. If the thread sleeps/ gets delayed the number exceed 350 but
did not reach 400 in testing. These were the spikes during testing.
The bulk free of 64 pointers at once should improve the give-back if the
list grows. The list size is ~1.3 items per invocations.
Having one global scf_free_pool with one cleaning thread let the list
grow to over 10.000 items with 32 CPUs (again, spikes not the average)
especially if the CPU went to sleep. The per-CPU part looks like a good
compromise.
Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Closes: https://lore.kernel.org/lkml/41619255-cdc2-4573-a360-7794fc3614f7@paulmck-laptop/
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Memory allocations can not happen within regions with explicit disabled
preemption PREEMPT_RT. The problem is that the locking structures
underneath are sleeping locks.
Move the memory allocation outside of the preempt-disabled section. Keep
the GFP_ATOMIC for the allocation to behave like a "ememergncy
allocation".
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The smp_call_function() needs to be invoked with the wait flag set to
wait until scf_cleanup_handler() is done. This ensures that all SMP
function calls, that have been queued earlier, complete at this point.
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Replace "scfp->cpu % nr_cpu_ids" with "cpu". This has been computed
earlier.
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
PERF_HAVE_DWARF_REGS was true when an architecture had a dwarf-regs.c
file. There are no more architecture dwarf-regs.c files, selection is
done using constants from the ELF file rather than conditional
compilation. When removing PERF_HAVE_DWARF_REGS was the only variable
in the Makefile, remove the Makefile.
Add missing SPDX for RISC-V Makefile.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-21-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
