Enable the list IOCTL to provide lists longer than one page (85 entries).
The list IOCTL now accepts any argument length in page granularity.
It fills the argument up to this length with entries until the list
ends. User space unaware of this enhancement will still receive one page
of data and an uv_rc 0x0100.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241104153609.1361388-1-seiden@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241104153609.1361388-1-seiden@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add a trival phys_to_target_node() implementation which always returns 0 if
CONFIG_NUMA is enabled, since the s390 NUMA implementation only supports
node 0.
This is similar to memory_add_physaddr_to_nid() in order to avoid runtime
warnings.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
David Hildenbrand says:
====================
virtio-mem: s390 support
Let's finally add s390 support for virtio-mem; my last RFC was sent
4 years ago, and a lot changed in the meantime.
The latest QEMU series is available at [1], which contains some more
details and a usage example on s390 (last patch).
There is not too much in here: The biggest part is querying a new diag(500)
STORAGE_LIMIT hypercall to obtain the proper "max_physmem_end".
The last three patches are not strictly required but certainly nice-to-have.
Note that -- in contrast to standby memory -- virtio-mem memory must be
configured to be automatically onlined as soon as hotplugged. The easiest
approach is using the "memhp_default_state=" kernel parameter or by using
proper udev rules. More details can be found at [2].
I have reviving+upstreaming a systemd service to handle configuring
that on my todo list, but for some reason I keep getting distracted ...
I tested various things, including:
* Various memory hotplug/hotunplug combinations
* Device hotplug/hotunplug
* /proc/iomem output
* reboot
* kexec
* kdump: make sure we properly enter the "kdump mode" in the virtio-mem
driver
kdump support for virtio-mem memory on s390 will be sent out separately.
v2 -> v3
* "s390/kdump: make is_kdump_kernel() consistently return "true" in kdump
environments only"
-> Sent out separately [3]
* "s390/physmem_info: query diag500(STORAGE LIMIT) to support QEMU/KVM memory
devices"
-> No query function for diag500 for now.
-> Update comment above setup_ident_map_size().
-> Optimize/rewrite diag500_storage_limit() [Heiko]
-> Change handling in detect_physmem_online_ranges [Alexander]
-> Improve documentation.
* "s390/sparsemem: provide memory_add_physaddr_to_nid() with CONFIG_NUMA"
-> Added after testing on systems with CONFIG_NUMA=y
v1 -> v2:
* Document the new diag500 subfunction
* Use "s390" instead of "s390x" consistently
[1] https://lkml.kernel.org/r/20241008105455.2302628-1-david@redhat.com
[2] https://virtio-mem.gitlab.io/user-guide/user-guide-linux.html
[3] https://lkml.kernel.org/r/20241023090651.1115507-1-david@redhat.com
====================
Link: https://lore.kernel.org/r/20241025141453.1210600-1-david@redhat.com/
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
virtio-mem uses memory_add_physaddr_to_nid() to determine the NID to use
for memory it adds.
We currently fallback to the dummy implementation in mm/numa.c with
CONFIG_NUMA, which will end up triggering an undesired pr_info_once():
Unknown online node for memory at 0x100000000, assuming node 0
On s390, we map all cpus and memory to node 0, so let's add a simple
memory_add_physaddr_to_nid() implementation that does exactly that,
but without complaining.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241025141453.1210600-8-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Ever since commit 421c175c4d ("[S390] Add support for memory hot-add.")
we've been using a section size of 256 MiB on s390 and 32 MiB on s390.
Before that, we were using a section size of 32 MiB on both
architectures.
Now that we have a new mechanism to expose additional memory to a VM --
virtio-mem -- reduce the section size to 128 MiB to allow for more
flexibility and reduce the metadata overhead when dealing with hot(un)plug
granularity smaller than 256 MiB.
128 MiB has been used by x86-64 since the very beginning. arm64 with 4k
base pages switched to 128 MiB as well: it's just big enough on these
architectures to allows for using a huge page (2 MiB) in the vmemmap in
sane setups with sizeof(struct page) == 64 bytes and a huge page mapping
in the direct mapping, while still allowing for small hot(un)plug
granularity.
For s390, we could even switch to a 64 MiB section size, as our huge page
size is 1 MiB: but the smaller the section size, the more sections we'll
have to manage especially on bigger machines. Making it consistent with
x86-64 and arm64 feels like the right thing for now.
Note that the smallest memory hot(un)plug granularity is also limited by
the memory block size, determined by extracting the memory increment
size from SCLP. Under QEMU/KVM, implementing virtio-mem, we expose 0;
therefore, we'll end up with a memory block size of 128 MiB with a
128 MiB section size.
Tested-by: Mario Casquero <mcasquer@redhat.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241025141453.1210600-7-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
virtio-mem currently depends on !DEVMEM | STRICT_DEVMEM. Let's default
STRICT_DEVMEM to "y" just like we do for arm64 and x86.
There could be ways in the future to filter access to virtio-mem device
memory even without STRICT_DEVMEM, but for now let's just keep it
simple.
Tested-by: Mario Casquero <mcasquer@redhat.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241025141453.1210600-6-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Now that s390 code is prepared for memory devices that reside above the
maximum storage increment exposed through SCLP, everything is in place
to unlock virtio-mem support.
As virtio-mem in Linux currently supports logically onlining/offlining
memory in pageblock granularity, we have an effective hot(un)plug
granularity of 1 MiB on s390.
As virito-mem adds/removes individual Linux memory blocks (256MB), we
will currently never use gigantic pages in the identity mapping.
It is worth noting that neither storage keys nor storage attributes (e.g.,
data / nodat) are touched when onlining memory blocks, which is good
because we are not supposed to touch these parts for unplugged device
blocks that are logically offline in Linux.
We will currently never initialize storage keys for virtio-mem
memory -- IOW, storage_key_init_range() is never called. It could be added
in the future when plugging device blocks. But as that function
essentially does nothing without modifying the code (changing
PAGE_DEFAULT_ACC), that's just fine for now.
kexec should work as intended and just like on other architectures that
support virtio-mem: we will never place kexec binaries on virtio-mem
memory, and never indicate virtio-mem memory to the 2nd kernel. The
device driver in the 2nd kernel can simply reset the device --
turning all memory unplugged, to then start plugging memory and adding
them to Linux, without causing trouble because the memory is already
used elsewhere.
The special s390 kdump mode, whereby the 2nd kernel creates the ELF
core header, won't currently dump virtio-mem memory. The virtio-mem
driver has a special kdump mode, from where we can detect memory ranges
to dump. Based on this, support for dumping virtio-mem memory can be
added in the future fairly easily.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241025141453.1210600-5-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To support memory devices under QEMU/KVM, such as virtio-mem,
we have to prepare our kernel virtual address space accordingly and
have to know the highest possible physical memory address we might see
later: the storage limit. The good old SCLP interface is not suitable for
this use case.
In particular, memory owned by memory devices has no relationship to
storage increments, it is always detected using the device driver, and
unaware OSes (no driver) must never try making use of that memory.
Consequently this memory is located outside of the "maximum storage
increment"-indicated memory range.
Let's use our new diag500 STORAGE_LIMIT subcode to query this storage
limit that can exceed the "maximum storage increment", and use the
existing interfaces (i.e., SCLP) to obtain information about the initial
memory that is not owned+managed by memory devices.
If a hypervisor does not support such memory devices, the address exposed
through diag500 STORAGE_LIMIT will correspond to the maximum storage
increment exposed through SCLP.
To teach kdump on s390 to include memory owned by memory devices, there
will be ways to query the relevant memory ranges from the device via a
driver running in special kdump mode (like virtio-mem already implements
to filter /proc/vmcore access so we don't end up reading from unplugged
device blocks).
Update setup_ident_map_size(), to clarify that there can be more than
just online and standby memory.
Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241025141453.1210600-4-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Let's document our new diag500 subfunction that can be implemented by
userspace.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241025141453.1210600-3-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Let's make it a generic KVM hypercall, allowing other subfunctions to
be more independent of virtio.
While at it, document that unsupported/unimplemented subfunctions result
in a SPECIFICATION exception.
This is a preparation for documenting a new subfunction.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241025141453.1210600-2-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The program interrupt code has some extra bits that are sometimes set
by hardware for various reasons; those bits should be ignored when the
program interrupt number is needed for interrupt handling.
Fixes: 05066cafa9 ("s390/mm/fault: Handle guest-related program interrupts in KVM")
Reported-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241031120316.25462-1-imbrenda@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add a 20-byte field ats to struct nfc_target and expose it as
NFC_ATTR_TARGET_ATS via the netlink interface. The payload contains
'historical bytes' that help to distinguish cards from one another.
The information is commonly used to assemble an emulated ATR similar
to that reported by smart cards with contacts.
Add a 20-byte field target_ats to struct nci_dev to hold the payload
obtained in nci_rf_intf_activated_ntf_packet() and copy it to over to
nfc_target.ats in nci_activate_target(). The approach is similar
to the handling of 'general bytes' within ATR_RES.
Replace the hard-coded size of rats_res within struct
activation_params_nfca_poll_iso_dep by the equal constant NFC_ATS_MAXSIZE
now defined in nfc.h
Within NCI, the information corresponds to the 'RATS Response' activation
parameter that omits the initial length byte TL. This loses no
information and is consistent with our handling of SENSB_RES that
also drops the first (constant) byte.
Tested with nxp_nci_i2c on a few type A targets including an
ICAO 9303 compliant passport.
I refrain from the corresponding change to digital_in_recv_ats()
to have the few drivers based on digital.h fill nfc_target.ats,
as I have no way to test it. That class of drivers appear not to set
NFC_ATTR_TARGET_SENSB_RES either. Consider a separate patch to propagate
(all) the parameters.
Signed-off-by: Juraj Šarinay <juraj@sarinay.com>
Link: https://patch.msgid.link/20241103124525.8392-1-juraj@sarinay.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If jobs are still enqueued in struct drm_gpu_scheduler.pending_list
when drm_sched_fini() gets called, those jobs will be leaked since that
function stops both job-submission and (automatic) job-cleanup. It is,
thus, up to the driver to take care of preventing leaks.
The related function drm_sched_wqueue_stop() also prevents automatic job
cleanup.
Those pitfals are not reflected in the documentation, currently.
Explicitly inform about the leak problem in the docstring of
drm_sched_fini().
Additionally, detail the purpose of drm_sched_wqueue_{start,stop} and
hint at the consequences for automatic cleanup.
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105143137.71893-2-pstanner@redhat.com
Commit a23aa04042 ("net: stmmac: ethtool: Fixed calltrace caused by
unbalanced disable_irq_wake calls") introduced checks to prevent
unbalanced enable and disable IRQ wake calls. However it only
initialized the auxiliary variable on one of the paths,
stmmac_request_irq_multi_msi(), missing the other,
stmmac_request_irq_single().
Add the same initialization on stmmac_request_irq_single() to prevent
"Unbalanced IRQ <x> wake disable" warnings from being printed the first
time disable_irq_wake() is called on platforms that run on that code
path.
Fixes: a23aa04042 ("net: stmmac: ethtool: Fixed calltrace caused by unbalanced disable_irq_wake calls")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241101-stmmac-unbalanced-wake-single-fix-v1-1-5952524c97f0@collabora.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
That allows the fields in those command data structures to
be easily validated. If an unsupported field is accessed, a
warning is generated.
This will not force UCSI version checks to be made in every
place where these data structures are accessed, but it will
make it easier to pinpoint issues that are caused by the
unconditional accesses to those fields, and perhaps more
importantly, allow those issues to be noticed immediately.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20241106150605.1017744-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com>
Link: https://lore.kernel.org/r/20241104190700.275573-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only propose KEBA CP500 drivers on architectures where the device
exists, unless build-testing.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20241104142217.1dad57cf@endymion.delvare
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The early_console_setup() function initializes the sci_ports[0].port with
an object of type struct uart_port obtained from the object of type
struct earlycon_device received as argument by the early_console_setup().
It may happen that later, when the rest of the serial ports are probed,
the serial port that was used as earlycon (e.g., port A) to be mapped to a
different position in sci_ports[] and the slot 0 to be used by a different
serial port (e.g., port B), as follows:
sci_ports[0] = port A
sci_ports[X] = port B
In this case, the new port mapped at index zero will have associated data
that was used for earlycon.
In case this happens, after Linux boot, any access to the serial port that
maps on sci_ports[0] (port A) will block the serial port that was used as
earlycon (port B).
To fix this, add early_console_exit() that clean the sci_ports[0] at
earlycon exit time.
Fixes: 0b0cced19a ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20241106120118.1719888-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify the request port function by using a single call
to devm_platform_ioremap_resource().
This will also enhance the printing from /proc/iomem:
cat /proc/iomem | grep flexcom ; cat /proc/iomem | grep serial
f0004000-f00041ff : f0004000.flexcom flexcom@f0004000
f8020000-f80201ff : f8020000.flexcom flexcom@f8020000
f0004200-f00043ff : f0004200.serial serial@200
f8020200-f80203ff : f8020200.serial serial@200
fffff200-fffff3ff : fffff200.serial serial@fffff200
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Tested-by: Andrei Simion <andrei.simion@microchip.com>
Reviewed-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com>
Link: https://lore.kernel.org/r/20241105131946.22449-1-mihai.sain@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
