The struct arch_vdso_data is only about vdso time data. So rename it to
arch_vdso_time_data to make it obvious.
Non time-related data will be migrated out of these structs soon.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-28-b64f0842d512@linutronix.de
The systemcfg data only has minimal overlap with the vdso data.
Splitting the two avoids mapping the implementation-defined vdso data
into /proc/ppc64/systemcfg.
It is also a preparation for the standardization of vdso data storage.
The only field actually used by both systemcfg and vdso is
tb_ticks_per_sec and it is only changed once during time_init().
Initialize it in both structures there.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-26-b64f0842d512@linutronix.de
The systemcfg page through procfs is only a backwards-compatible
interface for very old applications.
Make it possible to be disabled.
This also creates a convenient config #define to guard any accesses to
the systemcfg page.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-25-b64f0842d512@linutronix.de
The systemcfg processorCount variable tracks currently online variables,
not possible ones, so the stored value is wrong.
The code preferably tries to use the ibm,lrdr-capacity field 4 which
"represents the maximum number of processors that the guest can have."
Switch from processorCount to the better matching num_possible_cpus().
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-24-b64f0842d512@linutronix.de
When printing the information "system_active_processors", the variable
partition_potential_processors is used instead of
partition_active_processors. The wrong value is displayed.
Use partition_active_processors instead.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-23-b64f0842d512@linutronix.de
The generic vdso data storage cannot handle the special pvclock and
hvclock pages. Split them into their own mapping, so the other vdso
storage can be migrated to the generic code.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-20-b64f0842d512@linutronix.de
The vdso_data is at the start of the vvar page.
Make use of this invariant to remove the usage of vvar.h.
This also matches the logic for the timens data.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-18-b64f0842d512@linutronix.de
The vdso_data is at the start of the timens page.
Make use of this invariant to remove the usage of vvar.h.
This also matches the logic for the pvclock and hvclock pages.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-15-b64f0842d512@linutronix.de
Remove the usage of the vvar _vdso_rng_data from the kernel-space code,
as the x86 vvar machinery is about to be removed.
The definition of the structure is unnecessary, as the data lives in a
page pre-allocated by the linker anyways.
The vdso user-space access to the rng data will be switched soon.
DEFINE_VVAR_SINGLE() is now unused. It will be removed later togehter
with the rest of vvar.h.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-13-b64f0842d512@linutronix.de
The offset of the vdso_data only has historic reasons, as back then
other vvars also existed and offset 0 was already used.
(See commit 8c49d9a74b ("x86-64: Clean up vdso/kernel shared variables"))
Over time most other vvars got removed and offset 0 is free again.
Moving vdso_data to the beginning of the vvar page aligns x86 with other
architectures and opens up the way for the removal of the custom x86
vvar machinery.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-12-b64f0842d512@linutronix.de
The generic vdso/datapage.h declares a symbol named "vdso_data".
Avoid a conflict by renaming the identically named variable in genvdso.c.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-9-b64f0842d512@linutronix.de
vdso/datapage.h provides symbols and functions to ease the access to
shared vDSO data from both the kernel and the vDSO.
Make use of it to simplify the current code and also prepare for further
changes unifying the vDSO data storage between architectures.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-8-b64f0842d512@linutronix.de
vdso/datapage.h provides a hidden declaration for _vdso_data.
When using it the compiler will automatically generate PC-relative
accesses which avoids the need for a custom assembly-based accessor.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-7-b64f0842d512@linutronix.de
The vvar mapping is the same for all processes. Use a single mapping to
simplify the logic and align it with the other architectures.
In addition this will enable the move of the vvar handling into generic code.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-6-b64f0842d512@linutronix.de
The vvar mapping is the same for all processes. Use a single mapping to
simplify the logic and align it with the other architectures.
In addition this will enable the move of the vvar handling into generic code.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-5-b64f0842d512@linutronix.de
This constant is always "0", providing no value and making the logic
harder to understand.
Also prepare for a consolidation of the vdso linkerscript logic by
aligning it with other architectures.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-4-b64f0842d512@linutronix.de
This constant is always "0", providing no value and making the logic
harder to understand.
Also prepare for a consolidation of the vdso linkerscript logic by
aligning it with other architectures.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-3-b64f0842d512@linutronix.de
All callers of arch_vma_name() also get the name via vm_ops, which for
these VMAs will use the name from 'struct vma_special_mapping'.
Therefore the custom implementation is unnecessary and can be removed in
favor of the default implementation from kernel/signal.c.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-2-b64f0842d512@linutronix.de
The time-related VDSO functionality was introduced in 2021 in
commit 87f3248cdb ("csky: Reconstruct VDSO framework") and
commit 0d3b051adb ("csky: Add VDSO with GENERIC_GETTIMEOFDAY, GENERIC_TIME_VSYSCALL, HAVE_GENERIC_VDSO").
However the corresponding aux-vector entry AT_SYSINFO_EHDR was never
wired up, making these functions impossible to test or use.
The VDSO itself is kept as it also provides rt_sigreturn which is
exposed differently to userspace.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-1-b64f0842d512@linutronix.de
The A100 has 3 MMC controllers, one of them being especially targeted to
eMMC. Let's add nodes on dts.
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Link: https://patch.msgid.link/20241031070232.1793078-10-masterr3c0rd@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The Allwinner A100 has two HCI USB controllers, a OTG controller and a
USB PHY. The PHY is compatible with that used by the D1, while the OTG
controller is compatible with the A33. Add nodes for these to the base
DTSI.
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
[masterr3c0rd@epochal.quest: fallback to a33-musb and d1-usb-phy, edited message]
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Parthiban Nallathambi <parthiban@linumiz.com>
Link: https://patch.msgid.link/20241031070232.1793078-7-masterr3c0rd@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The A100 MUSB peripheral has 10 endpoints, and thus is compatible with
the A33 version.
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241031070232.1793078-6-masterr3c0rd@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The Allwinner A100 contains two fully OHCI/EHCI compatible USB host
controllers. Add their compatible strings to the list of
generic OHCI/EHCI controllers.
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20241031070232.1793078-5-masterr3c0rd@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The USB PHY found in the A100 is similar to that found in the D1. Add a
compatible for the A100.
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241031070232.1793078-4-masterr3c0rd@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the Performance Monitoring Unit (PMU) device tree node to the A100
.dtsi, which tells DT users which interrupts are triggered by PMU overflow
events on each core.
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Link: https://patch.msgid.link/20241031070232.1793078-2-masterr3c0rd@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
To work around a limitation in our clock modelling, we try to force two
bits in the AUDIO0 PLL to 0, in the CCU probe routine.
However the ~ operator only applies to the first expression, and does
not cover the second bit, so we end up clearing only bit 1.
Group the bit-ORing with parentheses, to make it both clearer to read
and actually correct.
Fixes: 35b97bb941 ("clk: sunxi-ng: Add support for the D1 SoC clocks")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241001105016.1068558-1-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
If an error indicating that the device needs to be reset is reported,
disable the error reporting before device reset is complete,
enable the error reporting after the reset is complete to prevent
the same error from being reported repeatedly.
Fixes: eaebf4c3b1 ("crypto: hisilicon - Unify hardware error init/uninit into QM")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Query the capability register status of accelerator devices
(SEC, HPRE and ZIP) through the debugfs interface, for example:
cat cap_regs. The purpose is to improve the robustness and
locability of hardware devices and drivers.
Signed-off-by: Qi Tao <taoqi10@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
encrypt_blob(), decrypt_blob() and create_signature() were some of the
functions added in 2018 by
commit 5a30771832 ("KEYS: Provide missing asymmetric key subops for new
key type ops [ver #2]")
however, they've not been used.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/char/hw_random to use
.remove(), with the eventual goal to drop struct
platform_driver::remove_new(). As .remove() and .remove_new() have the
same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
clocksource_delta() has two variants. One with a check for negative motion,
which is only selected by x86. This is a historic leftover as this function
was previously used in the time getter hot paths.
Since 135225a363 timekeeping_cycles_to_ns() has unconditional protection
against this as a by-product of the protection against 64bit math overflow.
clocksource_delta() is only used in the clocksource watchdog and in
timekeeping_advance(). The extra conditional there is not hurting anyone.
Remove the config option and unconditionally prevent negative motion of the
readout.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241031120328.599430157@linutronix.de
Since 135225a363 timekeeping_cycles_to_ns() handles large offsets which
would lead to 64bit multiplication overflows correctly. It's also protected
against negative motion of the clocksource unconditionally, which was
exclusive to x86 before.
timekeeping_advance() handles large offsets already correctly.
That means the value of CONFIG_DEBUG_TIMEKEEPING which analyzed these cases
is very close to zero. Remove all of it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241031120328.536010148@linutronix.de
Fix the breakpoint enable command (be) to a logic that is inline with the
breakpoint disable command (bd) in which if the breakpoint is already in
an enabled state, do not print the message of enabled again to the user.
Also a small nit fix of the new line in a separate print.
Signed-off-by: Nir Lichtman <nir@lichtman.org>
Link: https://lore.kernel.org/r/20241027204729.GA907155@lichtman.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Remove logic that enables a fallback of interpreting numbers supplied in KDB CLI
to be interpreted as hex without explicit "0x" prefix as this can be confusing
for the end users.
Suggested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Nir Lichtman <nir@lichtman.org>
Link: https://lore.kernel.org/r/20241028192228.GC918454@lichtman.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
The function simple_strtoul performs no error checking in scenarios
where the input value overflows the intended output variable.
This results in this function successfully returning, even when the
output does not match the input string (aka the function returns
successfully even when the result is wrong).
Or as it was mentioned [1], "...simple_strtol(), simple_strtoll(),
simple_strtoul(), and simple_strtoull() functions explicitly ignore
overflows, which may lead to unexpected results in callers."
Hence, the use of those functions is discouraged.
This patch replaces all uses of the simple_strtoul with the safer
alternatives kstrtoint and kstrtol.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#simple-strtol-simple-strtoll-simple-strtoul-simple-strtoull
Signed-off-by: Yuran Pereira <yuran.pereira@hotmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
[nir: style fixes]
Signed-off-by: Nir Lichtman <nir@lichtman.org>
Link: https://lore.kernel.org/r/20241028192100.GB918454@lichtman.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
The simple_str* family of functions perform no error checking in
scenarios where the input value overflows the intended output variable.
This results in these functions successfully returning even when the
output does not match the input string.
Or as it was mentioned [1], "...simple_strtol(), simple_strtoll(),
simple_strtoul(), and simple_strtoull() functions explicitly ignore
overflows, which may lead to unexpected results in callers."
Hence, the use of those functions is discouraged.
This patch replaces all uses of the simple_strto* series of functions
with their safer kstrto* alternatives.
Side effects of this patch:
- Every string to long or long long conversion using kstrto* is now
checked for failure.
- kstrto* errors are handled with appropriate `KDB_BADINT` wherever
applicable.
- A good side effect is that we end up saving a few lines of code
since unlike in simple_strto* functions, kstrto functions do not
need an additional "end pointer" variable, and the return values
of the latter can be directly checked in an "if" statement without
the need to define additional `ret` or `err` variables.
This, of course, results in cleaner, yet still easy to understand
code.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#simple-strtol-simple-strtoll-simple-strtoul-simple-strtoull
Signed-off-by: Yuran Pereira <yuran.pereira@hotmail.com>
[nir: addressed review comments by fixing styling, invalid conversion and a missing error return]
Signed-off-by: Nir Lichtman <nir@lichtman.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20241028191916.GA918454@lichtman.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
