Move pkvm_vcpu_init_traps() to the initialization of the
hypervisor's vcpu state in init_pkvm_hyp_vcpu(), and remove the
associated hypercall.
In protected mode, traps need to be initialized whenever a VCPU
is initialized anyway, and not only for protected VMs. This also
saves an unnecessary hypercall.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241018074833.2563674-2-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Here we see slightly more commits than wished, but basically all are
small and mostly trivial fixes. The only core change is the
workaround for __counted_by() usage in ASoC DAPM code, while the rest
are device-specific fixes for Intel Baytrail devices, Cirrus and
wcd937x codecs, and HD-audio / USB-audio devices.
-----BEGIN PGP SIGNATURE-----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=5pCP
-----END PGP SIGNATURE-----
Merge tag 'sound-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here we see slightly more commits than wished, but basically all are
small and mostly trivial fixes.
The only core change is the workaround for __counted_by() usage in
ASoC DAPM code, while the rest are device-specific fixes for Intel
Baytrail devices, Cirrus and wcd937x codecs, and HD-audio / USB-audio
devices"
* tag 'sound-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix headset mic on TUXEDO Stellaris 16 Gen6 mb1
ALSA: hda/realtek: Fix headset mic on TUXEDO Gemini 17 Gen3
ALSA: usb-audio: Add quirks for Dell WD19 dock
ASoC: codecs: wcd937x: relax the AUX PDM watchdog
ASoC: codecs: wcd937x: add missing LO Switch control
ASoC: dt-bindings: rockchip,rk3308-codec: add port property
ALSA: hda/realtek: Add subwoofer quirk for Infinix ZERO BOOK 13
ASoC: dapm: fix bounds checker error in dapm_widget_list_create
ASoC: Intel: sst: Fix used of uninitialized ctx to log an error
ASoC: cs42l51: Fix some error handling paths in cs42l51_probe()
ASoC: Intel: sst: Support LPE0F28 ACPI HID
ALSA: hda/realtek: Limit internal Mic boost on Dell platform
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet
ASoC: Intel: bytcr_rt5640: Add support for non ACPI instantiated codec
ASoC: codecs: rt5640: Always disable IRQs from rt5640_cancel_work()
Add the missing newline after entries for recently removed gpio chips
so that the chip sections are separated by a newline as intended.
Fixes: e348544f79 ("gpio: protect the list of GPIO devices with SRCU")
Cc: stable@vger.kernel.org # 6.9
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241028125000.24051-3-johan+linaro@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The gpiolib debugfs interface exports a list of all gpio chips in a
system and the state of their pins.
The gpio chip sections are supposed to be separated by a newline
character, but a long-standing bug prevents the separator from
being included when output is generated in multiple sessions, making the
output inconsistent and hard to read.
Make sure to only suppress the newline separator at the beginning of the
file as intended.
Fixes: f9c4a31f61 ("gpiolib: Use seq_file's iterator interface")
Cc: stable@vger.kernel.org # 3.7
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241028125000.24051-2-johan+linaro@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The ID_AA64PFR0.MPAM bit was previously accidentally exposed to guests,
and is ignored by KVM. KVM will always present the guest with 0 here,
and trap the MPAM system registers to inject an undef.
But, this value is still needed to prevent migration when the value
is incompatible with the target hardware. Add a kvm unit test to try
and write multiple values to ID_AA64PFR0.MPAM. Only the hardware value
previously exposed should be ignored, all other values should be
rejected.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-8-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
commit 011e5f5bf5 ("arm64/cpufeature: Add remaining feature bits in
ID_AA64PFR0 register") exposed the MPAM field of AA64PFR0_EL1 to guests,
but didn't add trap handling. A previous patch supplied the missing trap
handling.
Existing VMs that have the MPAM field of ID_AA64PFR0_EL1 set need to
be migratable, but there is little point enabling the MPAM CPU
interface on new VMs until there is something a guest can do with it.
Clear the MPAM field from the guest's ID_AA64PFR0_EL1 and on hardware
that supports MPAM, politely ignore the VMMs attempts to set this bit.
Guests exposed to this bug have the sanitised value of the MPAM field,
so only the correct value needs to be ignored. This means the field
can continue to be used to block migration to incompatible hardware
(between MPAM=1 and MPAM=5), and the VMM can't rely on the field
being ignored.
Signed-off-by: James Morse <james.morse@arm.com>
Co-developed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-7-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The sys_reg_descs array holds function pointers and reset value for
managing the user-space and guest view of system registers. These
are mostly created by a set of macro's as only some combinations
of behaviour are needed.
If a register needs special treatment, its sys_reg_descs entry is
open-coded. This is true of some id registers where the value provided
by user-space is validated by some helpers.
Before adding another one of these, add a helper that covers the
existing special cases. 'ID_FILTERED' expects helpers to set the
user-space value, and retrieve the modified reset value.
Like ID_WRITABLE() this uses id_visibility(), which should have no
functional change for the registers converted to use ID_FILTERED().
read_sanitised_id_aa64dfr0_el1() and read_sanitised_id_aa64pfr0_el1()
have been refactored to be called from kvm_read_sanitised_id_reg(), to
try be consistent with ID_WRITABLE().
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-6-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
commit 011e5f5bf5 ("arm64/cpufeature: Add remaining feature bits in
ID_AA64PFR0 register") exposed the MPAM field of AA64PFR0_EL1 to guests,
but didn't add trap handling.
If you are unlucky, this results in an MPAM aware guest being delivered
an undef during boot. The host prints:
| kvm [97]: Unsupported guest sys_reg access at: ffff800080024c64 [00000005]
| { Op0( 3), Op1( 0), CRn(10), CRm( 5), Op2( 0), func_read },
Which results in:
| Internal error: Oops - Undefined instruction: 0000000002000000 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.0-rc7-00559-gd89c186d50b2 #14616
| Hardware name: linux,dummy-virt (DT)
| pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : test_has_mpam+0x18/0x30
| lr : test_has_mpam+0x10/0x30
| sp : ffff80008000bd90
...
| Call trace:
| test_has_mpam+0x18/0x30
| update_cpu_capabilities+0x7c/0x11c
| setup_cpu_features+0x14/0xd8
| smp_cpus_done+0x24/0xb8
| smp_init+0x7c/0x8c
| kernel_init_freeable+0xf8/0x280
| kernel_init+0x24/0x1e0
| ret_from_fork+0x10/0x20
| Code: 910003fd 97ffffde 72001c00 54000080 (d538a500)
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
| ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
Add the support to enable the traps, and handle the three guest accessible
registers by injecting an UNDEF. This stops KVM from spamming the host
log, but doesn't yet hide the feature from the id registers.
With MPAM v1.0 we can trap the MPAMIDR_EL1 register only if
ARM64_HAS_MPAM_HCR, with v1.1 an additional MPAM2_EL2.TIDR bit traps
MPAMIDR_EL1 on platforms that don't have MPAMHCR_EL2. Enable one of
these if either is supported. If neither is supported, the guest can
discover that the CPU has MPAM support, and how many PARTID etc the
host has ... but it can't influence anything, so its harmless.
Fixes: 011e5f5bf5 ("arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register")
CC: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/linux-arm-kernel/20200925160102.118858-1-james.morse@arm.com/
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-5-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
ARMv8.4 adds support for 'Memory Partitioning And Monitoring' (MPAM)
which describes an interface to cache and bandwidth controls wherever
they appear in the system.
Add support to detect MPAM. Like SVE, MPAM has an extra id register that
describes some more properties, including the virtualisation support,
which is optional. Detect this separately so we can detect
mismatched/insane systems, but still use MPAM on the host even if the
virtualisation support is missing.
MPAM needs enabling at the highest implemented exception level, otherwise
the register accesses trap. The 'enabled' flag is accessible to lower
exception levels, but its in a register that traps when MPAM isn't enabled.
The cpufeature 'matches' hook is extended to test this on one of the
CPUs, so that firmware can emulate MPAM as disabled if it is reserved
for use by secure world.
Secondary CPUs that appear late could trip cpufeature's 'lower safe'
behaviour after the MPAM properties have been advertised to user-space.
Add a verify call to ensure late secondaries match the existing CPUs.
(If you have a boot failure that bisects here its likely your CPUs
advertise MPAM in the id registers, but firmware failed to either enable
or MPAM, or emulate the trap as if it were disabled)
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-4-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add code to head.S's el2_setup to detect MPAM and disable any EL2 traps.
This register resets to an unknown value, setting it to the default
parititons/pmg before we enable the MMU is the best thing to do.
Kexec/kdump will depend on this if the previous kernel left the CPU
configured with a restrictive configuration.
If linux is booted at the highest implemented exception level el2_setup
will clear the enable bit, disabling MPAM.
This code can't be enabled until a subsequent patch adds the Kconfig
and cpufeature boiler plate.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-3-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Move the existing MPAM system register defines from sysreg.h to
tools/sysreg and add the remaining system registers.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-2-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The PSCI v1.3 specification adds support for a SYSTEM_OFF2 function
which is analogous to ACPI S4 state. This will allow hosting
environments to determine that a guest is hibernated rather than just
powered off, and handle that state appropriately on subsequent launches.
Since commit 60c0d45a7f ("efi/arm64: use UEFI for system reset and
poweroff") the EFI shutdown method is deliberately preferred over PSCI
or other methods. So register a SYS_OFF_MODE_POWER_OFF handler which
*only* handles the hibernation, leaving the original PSCI SYSTEM_OFF as
a last resort via the legacy pm_power_off function pointer.
The hibernation code already exports a system_entering_hibernation()
function which is be used by the higher-priority handler to check for
hibernation. That existing function just returns the value of a static
boolean variable from hibernate.c, which was previously only set in the
hibernation_platform_enter() code path. Set the same flag in the simpler
code path around the call to kernel_power_off() too.
An alternative way to hook SYSTEM_OFF2 into the hibernation code would
be to register a platform_hibernation_ops structure with an ->enter()
method which makes the new SYSTEM_OFF2 call. But that would have the
unwanted side-effect of making hibernation take a completely different
code path in hibernation_platform_enter(), invoking a lot of special dpm
callbacks.
Another option might be to add a new SYS_OFF_MODE_HIBERNATE mode, with
fallback to SYS_OFF_MODE_POWER_OFF. Or to use the sys_off_data to
indicate whether the power off is for hibernation.
But this version works and is relatively simple.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20241019172459.2241939-7-dwmw2@infradead.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
In some cases when using the maple tree register cache, the lockdep
validator might complain about invalid deadlocks:
[7.131886] Possible interrupt unsafe locking scenario:
[7.131890] CPU0 CPU1
[7.131893] ---- ----
[7.131896] lock(&mt->ma_lock);
[7.131904] local_irq_disable();
[7.131907] lock(rockchip_drm_vop2:3114:(&vop2_regmap_config)->lock);
[7.131916] lock(&mt->ma_lock);
[7.131925] <Interrupt>
[7.131928] lock(rockchip_drm_vop2:3114:(&vop2_regmap_config)->lock);
[7.131936]
*** DEADLOCK ***
[7.131939] no locks held by swapper/0/0.
[7.131944]
the shortest dependencies between 2nd lock and 1st lock:
[7.131950] -> (&mt->ma_lock){+.+.}-{2:2} {
[7.131966] HARDIRQ-ON-W at:
[7.131973] lock_acquire+0x200/0x330
[7.131986] _raw_spin_lock+0x50/0x70
[7.131998] regcache_maple_write+0x68/0xe0
[7.132010] regcache_write+0x6c/0x90
[7.132019] _regmap_read+0x19c/0x1d0
[7.132029] _regmap_update_bits+0xc0/0x148
[7.132038] regmap_update_bits_base+0x6c/0xa8
[7.132048] rk8xx_probe+0x22c/0x3d8
[7.132057] rk8xx_spi_probe+0x74/0x88
[7.132065] spi_probe+0xa8/0xe0
[...]
[7.132675] }
[7.132678] ... key at: [<ffff800082943c20>] __key.0+0x0/0x10
[7.132691] ... acquired at:
[7.132695] _raw_spin_lock+0x50/0x70
[7.132704] regcache_maple_write+0x68/0xe0
[7.132714] regcache_write+0x6c/0x90
[7.132724] _regmap_read+0x19c/0x1d0
[7.132732] _regmap_update_bits+0xc0/0x148
[7.132741] regmap_field_update_bits_base+0x74/0xb8
[7.132751] vop2_plane_atomic_update+0x480/0x14d8 [rockchipdrm]
[7.132820] drm_atomic_helper_commit_planes+0x1a0/0x320 [drm_kms_helper]
[...]
[7.135112] -> (rockchip_drm_vop2:3114:(&vop2_regmap_config)->lock){-...}-{2:2} {
[7.135130] IN-HARDIRQ-W at:
[7.135136] lock_acquire+0x200/0x330
[7.135147] _raw_spin_lock_irqsave+0x6c/0x98
[7.135157] regmap_lock_spinlock+0x20/0x40
[7.135166] regmap_read+0x44/0x90
[7.135175] vop2_isr+0x90/0x290 [rockchipdrm]
[7.135225] __handle_irq_event_percpu+0x124/0x2d0
In the example above, the validator seems to get the scope of
dependencies wrong, since the regmap instance used in rk8xx-spi driver
has nothing to do with the instance from vop2.
Improve validation by sharing the regmap's lockdep class with the maple
tree's internal lock, while also providing a subclass for the latter.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20241031-regmap-maple-lockdep-fix-v2-1-06a3710f3623@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is only used by the nvmet zns passthrough code, which can trivially
just use bio_add_pc_page and do the sanity check for the max zone append
limit itself.
All future zoned file systems should follow the btrfs lead and let the
upper layers fill up bios unlimited by hardware constraints and split
them to the limits in the I/O submission handler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20241030051859.280923-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This code is unused, and all future zoned file systems should follow
the btrfs lead of splitting the bios themselves to the zoned limits
in the I/O submission handler, because if they didn't they would be
hit by commit ed9832bc08 ("block: introduce folio awareness and add
a bigger size from folio") breaking this code when the zone append
limit (that is usually the max_hw_sectors limit) is smaller than the
largest possible folio size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20241030051859.280923-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are unnecessary variables in the sdhci_uhs2_send_command() that will
generate a warning when building the kernel. Let's drop them!
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410252107.y9EgrTbA-lkp@intel.com/
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241030112216.4057-2-victorshihgli@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
There is a type issue in the argument in the __sdhci_uhs2_send_command()
that will generate a warning when building the kernel.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410260525.ZUuPhMJz-lkp@intel.com/
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Message-ID: <20241030112216.4057-1-victorshihgli@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The MT6328 PMIC is commonly used with the MT6735 SoC. Add initial
support for this PMIC.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241018081050.23592-5-y.oudjana@protonmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20241022124745.5d8d3778@endymion.delvare
Signed-off-by: Lee Jones <lee@kernel.org>
The ASoC CODEC driver masks the IRQs whilst entering and exiting
system suspend to avoid issues where the IRQ handler can run but PM
runtime is disabled. However, as the IRQs could also be used from
other parts of the driver, it would be better to move this handling to
the MFD level.
Remove the handling from the ASoC driver and move it to the MFD
driver. Whilst moving also ensure the IRQs are all masked at the device
level before powering down the device, as per hardware recommendations.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org.>
Link: https://lore.kernel.org/r/20241014095202.828194-1-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
The DP sink's capabilities, like DSC, may depend on the source OUI
written to the sink. On eDP this OUI value could have been reset before
the detection started if the panel power on it got disabled. Make sure
the OUI is re-written at the beginning of detection in this case, before
the sink capabilities are read out.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-8-imre.deak@intel.com
While updating the source OUI on the sink the driver should avoid
writing the OUI if it's already up-to-date to prevent the sink from
resetting itself in response to the update. On eDP - the only output
type where the OUI was updated so far - the driver ensured this by
comparing the current source OUI DPCD register values with the expected
Intel OUI value, skipping the update in case of a match. On some non-eDP
sinks - at least on Synaptics branch devices - this method doesn't work,
since the source OUI DPCD registers read back as all 0, even after
updating the registers.
Handle the above kind of sinks by tracking when the OUI was updated and
so should be valid, regardless of what the DPCD registers contain.
eDP sinks reset the written source OUI value when the panel power is
disabled, invalidate the OUI state accordingly.
This is required by a follow-up patch updating the source OUI for
non-eDP sink types as well.
v2: Fix setting intel_dp::oui_valid=true, if the DPCD register contains
already the expected value.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-5-imre.deak@intel.com
The X-Powers AXP323 is a very close sibling of the AXP313A. The only
difference seems to be the ability to dual-phase the first two DC/DC
converters.
Place the new AXP323 ID next to the existing AXP313A checks, to let
them share most code.
The only difference is the poly-phase detection code, which gets
extended to check the respective bit in a newly used register.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241007001408.27249-6-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
The X-Powers AXP323 is a very close sibling of the AXP313A. The only
difference seems to be the ability to dual-phase the first two DC/DC
converter, which adds another register.
Add the required boilerplate to introduce a new PMIC to the AXP MFD
driver. Where possible, this just maps into the existing structs defined
for the AXP313A, only deviating where needed.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20241007001408.27249-5-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
At the moment trying to register a second AXP chip makes the probe fail,
as some sysfs registration fails due to a duplicate name:
...
[ 3.688215] axp20x-i2c 0-0035: AXP20X driver loaded
[ 3.695610] axp20x-i2c 0-0036: AXP20x variant AXP323 found
[ 3.706151] sysfs: cannot create duplicate filename '/bus/platform/devices/axp20x-regulator'
[ 3.714718] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc1-00026-g50bf2e2c079d-dirty #192
[ 3.724020] Hardware name: Avaota A1 (DT)
[ 3.728029] Call trace:
[ 3.730477] dump_backtrace+0x94/0xec
[ 3.734146] show_stack+0x18/0x24
[ 3.737462] dump_stack_lvl+0x80/0xf4
[ 3.741128] dump_stack+0x18/0x24
[ 3.744444] sysfs_warn_dup+0x64/0x80
[ 3.748109] sysfs_do_create_link_sd+0xf0/0xf8
[ 3.752553] sysfs_create_link+0x20/0x40
[ 3.756476] bus_add_device+0x64/0x104
[ 3.760229] device_add+0x310/0x760
[ 3.763717] platform_device_add+0x10c/0x238
[ 3.767990] mfd_add_device+0x4ec/0x5c8
[ 3.771829] mfd_add_devices+0x88/0x11c
[ 3.775666] axp20x_device_probe+0x70/0x184
[ 3.779851] axp20x_i2c_probe+0x9c/0xd8
...
This is because we use PLATFORM_DEVID_NONE for the mfd_add_devices()
call, which would number the child devices in the same 0-based way, even
for the second (or any other) instance.
Use PLATFORM_DEVID_AUTO instead, which automatically assigns
non-conflicting device numbers.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20241007001408.27249-4-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
At the moment there is an implicit relationship between the AXP model
IDs and the order of the strings in the axp20x_model_names[] array.
This is fragile, and makes adding IDs in the middle error prone.
Make this relationship official by changing the ID type to the actual
enum used, and using indexed initialisers for the string list.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20241007001408.27249-3-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
The X-Powers AXP323 is a PMIC used on some newer Allwinner devices.
It is almost the same as the AXP313, but supports dual-phasing the first
two DC/DC converters. A pure AXP313 driver wouldn't know about this, and
might turn the linked DCDC2 regulator off, as it does not seem to be
used. This makes the AXP323 incompatible to the AXP313a.
Add the new compatible string, and treat it like the AXP313a.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241007001408.27249-2-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
If the source OUI DPCD register value matches the expected Intel OUI
value, the write timestamp doesn't get updated leaving it at the 0
initial value if the OUI wasn't written before. This can lead to an
incorrect wait duration in intel_dp_wait_source_oui(), since jiffies is
not inited to 0 in general (on a 32 bit system INITIAL_JIFFIES is set to
5 minutes ahead of wrap-around). Fix this by intializing the write
timestamp in the above case as well.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-4-imre.deak@intel.com
The sink's capabilities, like the DSC caps, depend on the source OUI
written to the sink's DPCD registers and so this OUI value should be
valid for the whole duration of the detection. An eDP sink will reset
this OUI value when the panel power is disabled, so prevent the
disabling - happening by default after a 1 sec idle period - for the
whole duration of detection.
v2: Update the documentation for intel_pps_on(). (Jani)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-3-imre.deak@intel.com
Make sure that a DP connector detection doesn't happen in parallel
with an ongoing modeset on the connector. The reasons for this are:
- Besides reading the capabilities, EDID etc. the detection may change
the state of the sink (via the AUX bus), for instance by setting the
LTTPR mode or the source OUI (the latter introduced by an upcoming
patch). It's better to avoid such changes affecting an onging modeset
in any way.
- During a modeset's link training any access to DPCD registers, besides
the registers used for link training should be avoided, at least in
the LTTPR non-transparent and transparent link training modes.
Such asynchronous accesses - besides connector detection - can also
happen via the AUX device node for instance, for those a parallel
modeset will have to be avoided in a similar way to the change in this
patch. (A topic for a follow-up change.)
- The source OUI written to an eDP sink is valid only while the panel
power is enabled. A modeset on eDP will enable/disable the panel power
synchronously; this should be prevented in the middle of the connector
detection, to ensure a consistent sink state (which depends on the
source OUI) for the whole duration of detection. The panel power could
still get disabled during detection after an idle period (1 sec), this
will be prevented by the next patch.
v2: (Ville)
- s/wait_for_crtc_hw_done/wait_for_connector_hw_done
- Get drm_device using an intel_display instead of drm_i915_private ptr.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-2-imre.deak@intel.com
When running defrag (manual defrag) against a file that has extents that
are contiguous and we already have the respective extent maps loaded and
merged, we end up not defragging the range covered by those contiguous
extents. This happens when we have an extent map that was the result of
merging multiple extent maps for contiguous extents and the length of the
merged extent map is greater than or equals to the defrag threshold
length.
The script below reproduces this scenario:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Create a 256K file with 4 extents of 64K each.
xfs_io -f -c "falloc 0 64K" \
-c "pwrite 0 64K" \
-c "falloc 64K 64K" \
-c "pwrite 64K 64K" \
-c "falloc 128K 64K" \
-c "pwrite 128K 64K" \
-c "falloc 192K 64K" \
-c "pwrite 192K 64K" \
$MNT/foo
umount $MNT
echo -n "Initial number of file extent items: "
btrfs inspect-internal dump-tree -t 5 $DEV | grep EXTENT_DATA | wc -l
mount $DEV $MNT
# Read the whole file in order to load and merge extent maps.
cat $MNT/foo > /dev/null
btrfs filesystem defragment -t 128K $MNT/foo
umount $MNT
echo -n "Number of file extent items after defrag with 128K threshold: "
btrfs inspect-internal dump-tree -t 5 $DEV | grep EXTENT_DATA | wc -l
mount $DEV $MNT
# Read the whole file in order to load and merge extent maps.
cat $MNT/foo > /dev/null
btrfs filesystem defragment -t 256K $MNT/foo
umount $MNT
echo -n "Number of file extent items after defrag with 256K threshold: "
btrfs inspect-internal dump-tree -t 5 $DEV | grep EXTENT_DATA | wc -l
Running it:
$ ./test.sh
Initial number of file extent items: 4
Number of file extent items after defrag with 128K threshold: 4
Number of file extent items after defrag with 256K threshold: 4
The 4 extents don't get merged because we have an extent map with a size
of 256K that is the result of merging the individual extent maps for each
of the four 64K extents and at defrag_lookup_extent() we have a value of
zero for the generation threshold ('newer_than' argument) since this is a
manual defrag. As a consequence we don't call defrag_get_extent() to get
an extent map representing a single file extent item in the inode's
subvolume tree, so we end up using the merged extent map at
defrag_collect_targets() and decide not to defrag.
Fix this by updating defrag_lookup_extent() to always discard extent maps
that were merged and call defrag_get_extent() regardless of the minimum
generation threshold ('newer_than' argument).
A test case for fstests will be sent along soon.
CC: stable@vger.kernel.org # 6.1+
Fixes: 199257a78b ("btrfs: defrag: don't use merged extent map for their generation check")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we have 3 or more adjacent extents in a file, that is, consecutive file
extent items pointing to adjacent extents, within a contiguous file range
and compatible flags, we end up not merging all the extents into a single
extent map.
For example:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt/sdc
$ xfs_io -f -d -c "pwrite -b 64K 0 64K" \
-c "pwrite -b 64K 64K 64K" \
-c "pwrite -b 64K 128K 64K" \
-c "pwrite -b 64K 192K 64K" \
/mnt/sdc/foo
After all the ordered extents complete we unpin the extent maps and try
to merge them, but instead of getting a single extent map we get two
because:
1) When the first ordered extent completes (file range [0, 64K)) we
unpin its extent map and attempt to merge it with the extent map for
the range [64K, 128K), but we can't because that extent map is still
pinned;
2) When the second ordered extent completes (file range [64K, 128K)), we
unpin its extent map and merge it with the previous extent map, for
file range [0, 64K), but we can't merge with the next extent map, for
the file range [128K, 192K), because this one is still pinned.
The merged extent map for the file range [0, 128K) gets the flag
EXTENT_MAP_MERGED set;
3) When the third ordered extent completes (file range [128K, 192K)), we
unpin its extent map and attempt to merge it with the previous extent
map, for file range [0, 128K), but we can't because that extent map
has the flag EXTENT_MAP_MERGED set (mergeable_maps() returns false
due to different flags) while the extent map for the range [128K, 192K)
doesn't have that flag set.
We also can't merge it with the next extent map, for file range
[192K, 256K), because that one is still pinned.
At this moment we have 3 extent maps:
One for file range [0, 128K), with the flag EXTENT_MAP_MERGED set.
One for file range [128K, 192K).
One for file range [192K, 256K) which is still pinned;
4) When the fourth and final extent completes (file range [192K, 256K)),
we unpin its extent map and attempt to merge it with the previous
extent map, for file range [128K, 192K), which succeeds since none
of these extent maps have the EXTENT_MAP_MERGED flag set.
So we end up with 2 extent maps:
One for file range [0, 128K), with the flag EXTENT_MAP_MERGED set.
One for file range [128K, 256K), with the flag EXTENT_MAP_MERGED set.
Since after merging extent maps we don't attempt to merge again, that
is, merge the resulting extent map with the one that is now preceding
it (and the one following it), we end up with those two extent maps,
when we could have had a single extent map to represent the whole file.
Fix this by making mergeable_maps() ignore the EXTENT_MAP_MERGED flag.
While this doesn't present any functional issue, it prevents the merging
of extent maps which allows to save memory, and can make defrag not
merging extents too (that will be addressed in the next patch).
Fixes: 199257a78b ("btrfs: defrag: don't use merged extent map for their generation check")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The test_run code detects whether a page has been modified and
re-initialises the xdp_frame structure if it has, using
xdp_update_frame_from_buff(). However, xdp_update_frame_from_buff()
doesn't touch frame->mem, so that wasn't correctly re-initialised, which
led to the pages from page_pool not being returned correctly. Syzbot
noticed this as a memory leak.
Fix this by also copying the frame->mem structure when re-initialising
the frame, like we do on initialisation of a new page from page_pool.
Fixes: e5995bc7e2 ("bpf, test_run: fix crashes due to XDP frame overwriting/corruption")
Fixes: b530e9e106 ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN")
Reported-by: syzbot+d121e098da06af416d23@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+d121e098da06af416d23@syzkaller.appspotmail.com
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/bpf/20241030-test-run-mem-fix-v1-1-41e88e8cae43@redhat.com
Commit 4f61c8fe35 ("ALSA: hda/conexant: Mute speakers at suspend /
shutdown") mutes speakers on system shutdown or whenever HDA controller
is suspended by PM; this however interacts badly with Thinkpad's ACPI
firmware behavior which uses beeps to signal various events (enter/leave
suspend or hibernation, AC power connect/disconnect, low battery, etc.);
now those beeps are either muted altogether (for suspend/hibernate/
shutdown related events) or work more or less randomly (eg. AC
plug/unplug is only audible when you are playing music at the moment,
because HDA device is likely in suspend mode otherwise).
Since the original bug report mentioned in 4f61c8fe35 complained about
Lenovo's Thinkpad laptop - revert this commit altogether.
Fixes: 4f61c8fe35 ("ALSA: hda/conexant: Mute speakers at suspend / shutdown")
Signed-off-by: Jarosław Janik <jaroslaw.janik@gmail.com>
Link: https://patch.msgid.link/20241030171813.18941-2-jaroslaw.janik@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since commit 92a81562e6 ("leds: lp55xx: Add multicolor framework
support to lp55xx") there are two subsequent tests if the chan_nr
(reg property) is in valid range. One in the lp55xx_init_led()
function and one in the lp55xx_parse_common_child() function that
was added with the mentioned commit.
There are two issues with that.
First is in the lp55xx_parse_common_child() function where the reg
property is tested right after it is read from the device tree.
Test for the upper range is not correct though. Valid reg values are
0 to (max_channel - 1) so it should be >=.
Second issue is that in case the parsed value is out of the range
the probe just fails and no error message is shown as the code never
reaches the second test that prints and error message.
Remove the test form lp55xx_parse_common_child() function completely
and keep the one in lp55xx_init_led() function to deal with it.
Fixes: 92a81562e6 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Link: https://lore.kernel.org/r/20241017150812.3563629-1-michal.vokac@ysoft.com
Signed-off-by: Lee Jones <lee@kernel.org>
Even default case should have a break statement to make code robust
against changes (e.g., adding a case after the default one).
Add missing break for the default case.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241016130023.872277-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Embrace ATTRIBUTE_GROUPS() to avoid boiler plate code.
While at it, move DEVICE_ATTR_ADMIN_RW() closer to the callbacks.
This should not introduce any functional changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241016105201.757024-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Like the DP83826, the DP83825 can also be configured as an RMII master or
slave via a control register. The existing function responsible for this
configuration is renamed to a general dp8382x function. The DP83825 only
supports RMII so nothing more needs to be configured.
With this change, the dp83822_driver list is reorganized according to the
device name.
Signed-off-by: Erik Schumacher <erik.schumacher@iris-sensing.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/aa62d081804f44b5af0e8de2372ae6bfe1affd34.camel@iris-sensing.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert the text bindings of pca955x to YAML so it could be used to
validate the DTS.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241016093857.925467-1-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Lee Jones <lee@kernel.org>
I haven't been able to properly review the work on the driver for a while.
Hence, this commit removes me from the maintainers list.
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Acked-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241014145009.3360515-1-mairacanal@riseup.net
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
When io_uring starts a write, it'll call kiocb_start_write() to bump the
super block rwsem, preventing any freezes from happening while that
write is in-flight. The freeze side will grab that rwsem for writing,
excluding any new writers from happening and waiting for existing writes
to finish. But io_uring unconditionally uses kiocb_start_write(), which
will block if someone is currently attempting to freeze the mount point.
This causes a deadlock where freeze is waiting for previous writes to
complete, but the previous writes cannot complete, as the task that is
supposed to complete them is blocked waiting on starting a new write.
This results in the following stuck trace showing that dependency with
the write blocked starting a new write:
task:fio state:D stack:0 pid:886 tgid:886 ppid:876
Call trace:
__switch_to+0x1d8/0x348
__schedule+0x8e8/0x2248
schedule+0x110/0x3f0
percpu_rwsem_wait+0x1e8/0x3f8
__percpu_down_read+0xe8/0x500
io_write+0xbb8/0xff8
io_issue_sqe+0x10c/0x1020
io_submit_sqes+0x614/0x2110
__arm64_sys_io_uring_enter+0x524/0x1038
invoke_syscall+0x74/0x268
el0_svc_common.constprop.0+0x160/0x238
do_el0_svc+0x44/0x60
el0_svc+0x44/0xb0
el0t_64_sync_handler+0x118/0x128
el0t_64_sync+0x168/0x170
INFO: task fsfreeze:7364 blocked for more than 15 seconds.
Not tainted 6.12.0-rc5-00063-g76aaf945701c #7963
with the attempting freezer stuck trying to grab the rwsem:
task:fsfreeze state:D stack:0 pid:7364 tgid:7364 ppid:995
Call trace:
__switch_to+0x1d8/0x348
__schedule+0x8e8/0x2248
schedule+0x110/0x3f0
percpu_down_write+0x2b0/0x680
freeze_super+0x248/0x8a8
do_vfs_ioctl+0x149c/0x1b18
__arm64_sys_ioctl+0xd0/0x1a0
invoke_syscall+0x74/0x268
el0_svc_common.constprop.0+0x160/0x238
do_el0_svc+0x44/0x60
el0_svc+0x44/0xb0
el0t_64_sync_handler+0x118/0x128
el0t_64_sync+0x168/0x170
Fix this by having the io_uring side honor IOCB_NOWAIT, and only attempt a
blocking grab of the super block rwsem if it isn't set. For normal issue
where IOCB_NOWAIT would always be set, this returns -EAGAIN which will
have io_uring core issue a blocking attempt of the write. That will in
turn also get completions run, ensuring forward progress.
Since freezing requires CAP_SYS_ADMIN in the first place, this isn't
something that can be triggered by a regular user.
Cc: stable@vger.kernel.org # 5.10+
Reported-by: Peter Mann <peter.mann@sh.cz>
Link: https://lore.kernel.org/io-uring/38c94aec-81c9-4f62-b44e-1d87f5597644@sh.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
