The investigation of an initialization failure [1] highlighted that
cxl_test does not reflect the init-order of real world systems. The
expected order is root/bus first then async probing of the memory
devices.
Fix up cxl_test to reflect that order. While it did not reproduce the
initial bug report (since that is dependent on built-in vs modular
builds), it did reveal a separate latent bug in the subsystem's decoder
shutdown flow. Fix for that sent separately.
Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1]
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/172964784521.81806.15791069994065969243.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
With the recent change to allow out-of-order decoder de-commit it
highlights a need to strengthen the in-order decoder commit guarantees.
As it stands match_free_decoder() ensures that if 2 regions are racing
decoder allocations the one that wins the race will get the lower id
decoder, but that still leaves the race to *commit* the decoder.
Rather than have this complicated case of "reserved in-order, but may
still commit out-of-order", just arrange for the reservation order to
match the commit-order. In other words, prevent subsequent allocations
until the last reservation is committed.
This precludes overlapping region creation events and requires the
previous regionN to either move forward to the decoder commit stage or
drop its reservation before regionN+1 can move forward. That is,
provided that regionN and regionN+1 decode through the same switch port.
As a side effect this allows match_free_decoder() to drop its dependency
on needing write access to the device_find_child() @data parameter [1].
Reported-by: Zijun Hu <quic_zijuhu@quicinc.com>
Closes: http://lore.kernel.org/20240905-const_dfc_prepare-v4-0-4180e1d5a244@quicinc.com
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/172964783668.81806.14962699553881333486.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
In support of investigating an initialization failure report [1],
cxl_test was updated to register mock memory-devices after the mock
root-port/bus device had been registered. That led to cxl_test crashing
with a use-after-free bug with the following signature:
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1
cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0
1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1
[..]
cxld_unregister: cxl decoder14.0:
cxl_region_decode_reset: cxl_region region3:
mock_decoder_reset: cxl_port port3: decoder3.0 reset
2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1
cxl_endpoint_decoder_release: cxl decoder14.0:
[..]
cxld_unregister: cxl decoder7.0:
3) cxl_region_decode_reset: cxl_region region3:
Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI
[..]
RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core]
[..]
Call Trace:
<TASK>
cxl_region_decode_reset+0x69/0x190 [cxl_core]
cxl_region_detach+0xe8/0x210 [cxl_core]
cxl_decoder_kill_region+0x27/0x40 [cxl_core]
cxld_unregister+0x5d/0x60 [cxl_core]
At 1) a region has been established with 2 endpoint decoders (7.0 and
14.0). Those endpoints share a common switch-decoder in the topology
(3.0). At teardown, 2), decoder14.0 is the first to be removed and hits
the "out of order reset case" in the switch decoder. The effect though
is that region3 cleanup is aborted leaving it in-tact and
referencing decoder14.0. At 3) the second attempt to teardown region3
trips over the stale decoder14.0 object which has long since been
deleted.
The fix here is to recognize that the CXL specification places no
mandate on in-order shutdown of switch-decoders, the driver enforces
in-order allocation, and hardware enforces in-order commit. So, rather
than fail and leave objects dangling, always remove them.
In support of making cxl_region_decode_reset() always succeed,
cxl_region_invalidate_memregion() failures are turned into warnings.
Crashing the kernel is ok there since system integrity is at risk if
caches cannot be managed around physical address mutation events like
CXL region destruction.
A new device_for_each_child_reverse_from() is added to cleanup
port->commit_end after all dependent decoders have been disabled. In
other words if decoders are allocated 0->1->2 and disabled 1->2->0 then
port->commit_end only decrements from 2 after 2 has been disabled, and
it decrements all the way to zero since 1 was disabled previously.
Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1]
Cc: stable@vger.kernel.org
Fixes: 176baefb2e ("cxl/hdm: Commit decoder state to hardware")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/172964782781.81806.17902885593105284330.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
In order to ensure root CXL ports are enabled upon cxl_acpi_probe()
when the 'cxl_port' driver is built as a module, arrange for the
module to be pre-loaded or built-in.
The "Fixes:" but no "Cc: stable" on this patch reflects that the issue
is merely by inspection since the bug that triggered the discovery of
this potential problem [1] is fixed by other means. However, a stable
backport should do no harm.
Fixes: 8dd2bc0f8e ("cxl/mem: Add the cxl_mem driver")
Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/172964781969.81806.17276352414854540808.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
It turns out since its original introduction, pre-2.6.12,
bus_rescan_devices() has skipped devices that might be in the process of
attaching or detaching from their driver. For CXL this behavior is
unwanted and expects that cxl_bus_rescan() is a probe barrier.
That behavior is simple enough to achieve with bus_for_each_dev() paired
with call to device_attach(), and it is unclear why bus_rescan_devices()
took the position of lockless consumption of dev->driver which is racy.
The "Fixes:" but no "Cc: stable" on this patch reflects that the issue
is merely by inspection since the bug that triggered the discovery of
this potential problem [1] is fixed by other means. However, a stable
backport should do no harm.
Fixes: 8dd2bc0f8e ("cxl/mem: Add the cxl_mem driver")
Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/172964781104.81806.4277549800082443769.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
When the CXL subsystem is built-in the module init order is determined
by Makefile order. That order violates expectations. The expectation is
that cxl_acpi and cxl_mem can race to attach. If cxl_acpi wins the race,
cxl_mem will find the enabled CXL root ports it needs. If cxl_acpi loses
the race it will retrigger cxl_mem to attach via cxl_bus_rescan(). That
flow only works if cxl_acpi can assume ports are enabled immediately
upon cxl_acpi_probe() return. That in turn can only happen in the
CONFIG_CXL_ACPI=y case if the cxl_port driver is registered before
cxl_acpi_probe() runs.
Fix up the order to prevent initialization failures. Ensure that
cxl_port is built-in when cxl_acpi is also built-in, arrange for
Makefile order to resolve the subsys_initcall() order of cxl_port and
cxl_acpi, and arrange for Makefile order to resolve the
device_initcall() (module_init()) order of the remaining objects.
As for what contributed to this not being found earlier, the CXL
regression environment, cxl_test, builds all CXL functionality as a
module to allow to symbol mocking and other dynamic reload tests. As a
result there is no regression coverage for the built-in case.
Reported-by: Gregory Price <gourry@gourry.net>
Closes: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net
Tested-by: Gregory Price <gourry@gourry.net>
Fixes: 8dd2bc0f8e ("cxl/mem: Add the cxl_mem driver")
Cc: stable@vger.kernel.org
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/172988474904.476062.7961350937442459266.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Use the dedicated helper for comparing device names against strings.
Note, the current code has a check for the dev_name() against NULL.
With the current implementations of the device_add() and dev_set_name()
it most likely a theoretical assumption that that might happen, while
I don't see how. Hence, that check has simply been removed.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241025142704.405340-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
The previous patch in this series introduced identical code in both
branches of an if-statement. Move that code outside the if-statement.
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-12-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Whether or not MCQ is used, call scsi_add_host() from
ufshcd_add_scsi_host(). For MCQ this patch swaps the order of the
scsi_add_host() and UFS device initialization. This patch prepares for
combining the two scsi_add_host() calls.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-11-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Previous changes guarantee that hba->scsi_host_added is true before
ufshcd_device_init() is called. Hence, remove the code from
ufshcd_device_init() that depends on hba->scsi_host_added being false.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-10-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Expand the ufshcd_device_init(hba, true) call and remove all code that
depends on init_dev_params == false. This change prepares for combining
the two scsi_add_host() calls.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-9-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_async_scan() is called (asynchronously) only by ufshcd_init().
Move the ufshcd_device_init(hba, true) call from ufshcd_async_scan()
into ufshcd_init(). This patch prepares for moving both scsi_add_host()
calls into ufshcd_add_scsi_host(). Calling ufshcd_device_init() from
ufshcd_init() without holding hba->host_sem is safe. This is safe
because hba->host_sem serializes core code and sysfs callbacks. The
ufshcd_device_init() call is moved before the scsi_add_host() call and
hence happens before any SCSI sysfs attributes are created.
Since ufshcd_device_init() may call scsi_add_host(), only call
scsi_add_host() from ufshcd_add_scsi_host() if the SCSI host has not yet
been added by ufshcd_device_init().
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-8-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move the ufshcd_device_init() and ufshcd_process_hba_result() calls to
the ufshcd_probe_hba() callers. This change refactors the code without
modifying the behavior of the UFSHCI driver. This change prepares for
moving one ufshcd_device_init() call into ufshcd_init().
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-7-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The comment /* UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH is set */ is
only correct if ufshcd_device_init() is only called by
ufshcd_probe_hba(). Convert the comment into an explicit check. This
patch prepares for moving the ufshcd_device_init() calls.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for moving a ufshcd_device_init() call from inside
ufshcd_probe_hba() into the ufshcd_probe_hba() callers by introducing
the function ufshcd_process_probe_result(). No functionality has been
changed.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Call ufshcd_add_scsi_host() after host controller initialization has
completed. This is safe because no code between the old and new
ufshcd_add_scsi_host() call site depends on the scsi_add_host() call.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for inlining one ufshcd_device_init() call by introducing the
new function ufshcd_post_device_init(). No functionality has been
changed.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move the code for adding a SCSI host and also the code for managing TMF
tags from ufshcd_init() into a new function called
ufshcd_add_scsi_host(). This patch prepares for combining the two
scsi_add_host() calls into a single call. No functionality has been
changed.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently in Ath12k, tasklet is used to handle the BH context of CE
interrupts. However the tasklet is marked deprecated and has some
design flaws. To replace tasklets, BH workqueue support has been
added. BH workqueue behaves similarly to regular workqueues except
that the queued work items are executed in the BH context.
Hence, convert the tasklet to BH workqueue for handling CE interrupts
in the BH context.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241022072406.3231450-1-quic_rajkbhag@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
There is no need to serialize single read/write calls to the host
controller registers. Remove the redundant host_lock calls that protect
access to the request list cLear register: UTRLCLR.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241024075033.562562-4-avri.altman@wdc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is no need to serialize single read/write calls to the host
controller registers. Remove the redundant host_lock calls that protect
access to the task management request List cLear register: UTMRLCLR.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241024075033.562562-3-avri.altman@wdc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is no need to serialize single read/write calls to the host
controller registers. Remove the redundant host_lock calls that protect
access to the task management doorbell register: UTMRLDBR.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241024075033.562562-2-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
From the UFSHCI specification: "CleanUp Command Return Code (RTC): host
controller sets this return code to provide more details of the cleanup
process. It is valid only when CUS is 1." Hence, do not read RTC if the
CUS bitfield is zero.
Cc: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Fixes: 8d72903489 ("scsi: ufs: mcq: Add supporting functions for MCQ abort")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022193130.2733293-7-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use blk_mq_quiesce_tagset() instead of ufshcd_scsi_block_requests() and
blk_mq_wait_quiesce_done(). Since this patch removes the last callers of
ufshcd_scsi_block_requests() and ufshcd_scsi_unblock_requests(), remove
these functions.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022193130.2733293-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The ufshcd_scsi_block_requests() and ufshcd_scsi_unblock_requests()
calls were introduced in ufshcd_exception_event_handler() to prevent
that querying the exception event information would time out. Commit
10fe5888a4 ("scsi: ufs: increase the scsi query response timeout")
increased the timeout for querying exception information from 30 ms to
1.5 s and thereby eliminated the risk that a timeout would happen.
Hence, the calls to block and unblock SCSI requests are superfluous.
Remove these calls.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Tested-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022193130.2733293-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The MCQ code is also valid for legacy mode. Hence, remove the legacy
mode code and retain the MCQ code. Since it is not an error if a command
completes while ufshcd_try_to_abort_task() is in progress, use
dev_info() instead of dev_err() to report this.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022193130.2733293-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The only statement that follows the 'out:' label in
ufshcd_try_to_abort_task() is a return-statement. Simplify this function
by changing 'goto out' statements into return statements.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022193130.2733293-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move the ufshcd_mcq_enable_esi() definition such that it occurs
immediately before the ufshcd_mcq_config_esi() definition.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022193130.2733293-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS with
ufs_hba_variant_ops::set_dma_mask. Update the Renesas driver
accordingly. This patch enables supporting other configurations than
32-bit or 64-bit DMA addresses, e.g. 36-bit DMA addresses.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241018194753.775074-1-bvanassche@acm.org
Reviewed-by: Avri Altman <Avri.Altman@wdc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If ufshcd_rtc_work calls ufshcd_rpm_put_sync() and the pm's usage_count
is 0, we will enter the runtime suspend callback. However, the runtime
suspend callback will wait to flush ufshcd_rtc_work, causing a deadlock.
Replace ufshcd_rpm_put_sync() with ufshcd_rpm_put() to avoid the
deadlock.
Fixes: 6bf999e0eb ("scsi: ufs: core: Add UFS RTC support")
Cc: stable@vger.kernel.org #6.11.x
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20241024015453.21684-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
AMD heterogeneous designs include two types of cores:
* Performance
* Efficiency
Each core type has different highest performance values configured by the
platform. Drivers such as amd_pstate need to identify the type of core to
correctly set an appropriate boost numerator to calculate the maximum
frequency.
X86_FEATURE_AMD_HETEROGENEOUS_CORES is used to identify whether the SoC
supports heterogeneous core type by reading CPUID leaf Fn_0x80000026.
On performance cores the scaling factor of 196 is used. On efficiency cores
the scaling factor is the value reported as the highest perf. Efficiency
cores have the same preferred core rankings.
Suggested-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241025171459.1093-6-mario.limonciello@amd.com
If the sg_copy_buffer() call returns less than sdebug_sector_size, then
we drop out of the copy loop. However, we still report that we copied
the full expected amount, which is not proper.
Fix by keeping a running total and return that value.
Fixes: 84f3a3c01d ("scsi: scsi_debug: Atomic write support")
Reported-by: Colin Ian King <colin.i.king@gmail.com>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241018101655.4207-1-john.g.garry@oracle.com
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sometimes it is required to take actions based on if a CPU is a performance or
efficiency core. As an example, intel_pstate driver uses the Intel core-type
to determine CPU scaling. Also, some CPU vulnerabilities only affect
a specific CPU type, like RFDS only affects Intel Atom. Hybrid systems that
have variants P+E, P-only(Core) and E-only(Atom), it is not straightforward to
identify which variant is affected by a type specific vulnerability.
Such processors do have CPUID field that can uniquely identify them. Like,
P+E, P-only and E-only enumerates CPUID.1A.CORE_TYPE identification, while P+E
additionally enumerates CPUID.7.HYBRID. Based on this information, it is
possible for boot CPU to identify if a system has mixed CPU types.
Add a new field hw_cpu_type to struct cpuinfo_topology that stores the
hardware specific CPU type. This saves the overhead of IPIs to get the CPU
type of a different CPU. CPU type is populated early in the boot process,
before vulnerabilities are enumerated.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20241025171459.1093-5-mario.limonciello@amd.com
Enable the SD_ASYM_PACKING domain flag for the PKG domain on AMD heterogeneous
processors. This flag is beneficial for processors with one or more CCDs and
relies on x86_sched_itmt_flags().
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20241025171459.1093-4-mario.limonciello@amd.com
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCZxu02AAKCRDh3BK/laaZ
PLDHAPwMzz4c+wbqz8Qo2IEo3lxvgPjgzMNXQetCgZFKvxKRlwD+PaIeRixGwwmB
ON3IsScZjROphzb+ofroUpj7lLEM7Ag=
=9rYN
-----END PGP SIGNATURE-----
Merge tag 'fuse-fixes-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
- Fix cached size after passthrough writes
This fix needed a trivial change in the backing-file API, which
resulted in some non-fuse files being touched.
- Revert a commit meant as a cleanup but which triggered a WARNING
- Remove a stray debug line left-over
* tag 'fuse-fixes-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: remove stray debug line
Revert "fuse: move initialization of fuse_file to fuse_writepages() instead of in callback"
fuse: update inode size after extending passthrough write
fs: pass offset and result to backing_file end_write() callback
The current so called "inner loop" in ufshcd_hba_execute_hce() is open
coding ufshcd_wait_for_register(). Replace it by
ufshcd_wait_for_register(). This is a code simplification - no
functional change.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241016102141.441382-1-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
- Fix a couple of use-after-free bugs
-----BEGIN PGP SIGNATURE-----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=1YOr
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a couple of use-after-free bugs
* tag 'nfsd-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: cancel nfsd_shrinker_work using sync mode in nfs4_state_shutdown_net
nfsd: fix race between laundromat and free_stateid
Performance problems may occur if there is a problem with the asymmetric
connected lane such as h/w failure. Currently, only check connected
lane for rx/tx is checked if it is not 0. But it should also be checked
if it is asymmetrically connected.
Signed-off-by: SEO HOYOUNG <hy50.seo@samsung.com>
Link: https://lore.kernel.org/r/e82b4b65b5f6501a687c624dd06e5c362e160f32.1728544727.git.hy50.seo@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
CPUID leaf 0x80000026 advertises core types with different efficiency
rankings.
Bit 30 indicates the heterogeneous core topology feature, if the bit
set, it means not all instances at the current hierarchical level have
the same core topology.
This is described in the AMD64 Architecture Programmers Manual Volume
2 and 3, doc ID #25493 and #25494.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241025171459.1093-3-mario.limonciello@amd.com
- Make acpi_parse_prmt() look for EFI_MEMORY_RUNTIME memory regions
only to comply with the UEFI specification and make PRM use
efi_guid_t instead of guid_t to avoid a compiler warning triggered
by that change (Koba Ko, Dan Carpenter).
- Add an ACPI IRQ override quirk for LG 16T90SP (Christian Heusel).
- Add a lid switch detection quirk for Samsung Galaxy Book2 (Shubham
Panwar).
-----BEGIN PGP SIGNATURE-----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=8OkL
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI PRM (Platform Runtime Mechanism) issue and add two
new DMI quirks, one for an ACPI IRQ override and one for lid switch
detection:
- Make acpi_parse_prmt() look for EFI_MEMORY_RUNTIME memory regions
only to comply with the UEFI specification and make PRM use
efi_guid_t instead of guid_t to avoid a compiler warning triggered
by that change (Koba Ko, Dan Carpenter)
- Add an ACPI IRQ override quirk for LG 16T90SP (Christian Heusel)
- Add a lid switch detection quirk for Samsung Galaxy Book2 (Shubham
Panwar)"
* tag 'acpi-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PRM: Clean up guid type in struct prm_handler_info
ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue
ACPI: resource: Add LG 16T90SP to irq1_level_low_skip_override[]
ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context
Update cpufreq documentation to match the code after recent
changes (Christian Loehle), fix a units conversion issue in the
CPPC cpufreq driver (liwei), and fix an error check in the
dtpm_devfreq power capping driver (Yuan Can).
-----BEGIN PGP SIGNATURE-----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=6+Ra
-----END PGP SIGNATURE-----
Merge tag 'pm-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Update cpufreq documentation to match the code after recent changes
(Christian Loehle), fix a units conversion issue in the CPPC cpufreq
driver (liwei), and fix an error check in the dtpm_devfreq power
capping driver (Yuan Can)"
* tag 'pm-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: CPPC: fix perf_to_khz/khz_to_perf conversion exception
powercap: dtpm_devfreq: Fix error check against dev_pm_qos_add_request()
cpufreq: docs: Reflect latency changes in docs
When OF support is disabled the of_device_id struct match table can be
conditionally compiled out, this helper allows the assignment to also be
turned into a NULL conditionally. When the of_device_id struct is not
conditionally defined based on OF then the table will be unused causing a
warning. The two options are to either set the table as _maybe_unused, or
to just remove this helper since the table will always be defined.
Do the latter here.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20241015213322.2649011-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
-----BEGIN PGP SIGNATURE-----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=L6G0
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.12-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Hold the rescan lock while adding devices to avoid race with
concurrent pwrctl rescan that can lead to a crash (Bartosz
Golaszewski)
- Avoid binding pwrctl driver to QCom WCN wifi if the DT lacks the
necessary PMU regulator descriptions (Bartosz Golaszewski)
* tag 'pci-v6.12-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/pwrctl: Abandon QCom WCN probe on pre-pwrseq device-trees
PCI: Hold rescan lock while adding devices during host probe
The details about the handling of the "normal" values were moved
to the _msecs_to_jiffies() helpers in commit ca42aaf0c8 ("time:
Refactor msecs_to_jiffies"). However, the same commit still mentioned
__msecs_to_jiffies() in the added documentation.
Thus point to _msecs_to_jiffies() instead.
Fixes: ca42aaf0c8 ("time: Refactor msecs_to_jiffies")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241025110141.157205-2-ojeda@kernel.org
The documentation's intention is to compare msecs_to_jiffies() (first
sentence) with __msecs_to_jiffies() (second sentence), which is what the
original documentation did. One of the cleanups in commit f3cb80804b
("time: Fix various kernel-doc problems") may have thought the paragraph
was talking about the latter since that is what it is being documented.
Thus revert that part of the change.
Fixes: f3cb80804b ("time: Fix various kernel-doc problems")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241025110141.157205-1-ojeda@kernel.org
