Separate the probes for HSMP ACPI and platform device drivers.
Provide a Kconfig option to choose between ACPI or the platform device
based driver. The common code which is the core part of the HSMP driver
maintained at hsmp.c is guarded by AMD_HSMP config and is selected by
these two driver configs. This will be built into separate hsmp_common.ko
module and acpi as hsmp_acpi and plat as amd_hsmp respectively.
Also add "|| COMPILE_TEST" clause in Kconfig to get build coverage for
HSMP.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-8-suma.hegde@amd.com
[ij: Fixed doc to use pre-formatted text for the ACPI dump.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add support for mmc on MT7988 SoC.
We can use mt7986 platform data in driver, but mt7988 needs different
clocks so for binding we need own compatible.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <20241012143826.7690-3-linux@fw-web.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add binding definitions for mmc on MT7988 SoC.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <20241012143826.7690-2-linux@fw-web.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Mediatek SoC MT8196 features a new design for tx/rx path. The new tx
path incorporates register settings that are closely associated with
bus timing. And the difference between new rx path and older versions
is the usage of distinct register bits when setting the data sampling
edge as part of the tuning process.
Besides, the register settings for STOP_DLY_SEL and POP_EN_CNT are
different from previous SoCs.
For the changes mentioned in relation to the MT8196, the new compatible
string 'mediatek,mt8196-mmc' is introduced. This is to accommodate
different settings and workflows specific to the MT8196.
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <20241011024906.8173-3-andy-ld.lu@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
There are modified register settings for STOP_DLY_SEL and POP_EN_CNT
from our next generation SoCs, due to the advanced chip manufacturing
process and the resulting changes in the internal signal timing.
Add two new fields to the compatibility structure to reflect the
modifications. For legacy SoCs, also add the original value of
'stop_dly_sel' to the platform data, for unified code setting.
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <20241011024906.8173-2-andy-ld.lu@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Extend the devicetree bindings to include the MT8196 mmc controller,
new tx/rx would be supported from MT8196, and the register settings
of STOP_DLY_SEL and POP_EN_CNT would also be variant.
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <20241011024906.8173-4-andy-ld.lu@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the netiucv code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the vfio_ap code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Tested-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the char/vmur code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the char/sclp_cpi_sys code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the char/sclp_ocf code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the char/vmlogrdr code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the char/tape_core code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the block/dcssblk code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the cio/scm code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the cio/css code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Tested-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the cio/ccwgroup code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Tested-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the cio/cmf code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the cio/device code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Tested-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the cio/chp code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Tested-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the zfcp code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Tested-by: Benjamin Block <bblock@linux.ibm.com>
Acked-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the s390/crypto code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred over
sprintf for presenting attributes to user space. Convert the left-over
uses in the s390/ipl code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred over
sprintf for presenting attributes to user space. Convert the left-over
uses in the s390/nospec-sysfs code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred over
sprintf for presenting attributes to user space. Convert the left-over
uses in the s390/perf_event code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred over
sprintf for presenting attributes to user space. Convert the left-over
uses in the s390/smp code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred over
sprintf for presenting attributes to user space. Convert the left-over
uses in the s390/time code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred over
sprintf for presenting attributes to user space. Convert the left-over
uses in the s390/topology code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
s390 sets "elfcorehdr_addr = ELFCORE_ADDR_MAX;" early during
setup_arch() to deactivate the "elfcorehdr= kernel" parameter,
resulting in is_kdump_kernel() returning "false".
During vmcore_init()->elfcorehdr_alloc(), if on a dump kernel and
allocation succeeded, elfcorehdr_addr will be set to a valid address
and is_kdump_kernel() will consequently return "true".
is_kdump_kernel() should return a consistent result during all boot
stages, and properly return "true" if in a kdump environment - just
like it is done on powerpc where "false" is indicated in fadump
environments, as added in commit b098f1c323 ("powerpc/fadump: make
is_kdump_kernel() return false when fadump is active").
Similarly provide a custom is_kdump_kernel() implementation that will only
return "true" in kdump environments, and will do so consistently during
boot.
Update the documentation of dump_available().
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Link: https://lore.kernel.org/r/20241023090651.1115507-1-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
kernel_page_present() was intentionally not implemented when adding
ARCH_HAS_SET_DIRECT_MAP support, since it was only used for suspend/resume
which is not supported anymore on s390.
A new bpf use case led to a compile error specific to s390. Even though
this specific use case went away implement kernel_page_present(), so that
the API is complete and potential future users won't run into this problem.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://lore.kernel.org/all/045de961-ac69-40cc-b141-ab70ec9377ec@iogearbox.net
Fixes: 0490d6d7ba ("s390/mm: enable ARCH_HAS_SET_DIRECT_MAP")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Starting with commit 2297791c92 ("s390/cio: dont unregister
subchannel from child-drivers"), CIO does not unregister subchannels
when the attached device is invalid or unavailable. Instead, it
allows subchannels to exist without a connected device. However, if
the DNV value is 0, such as, when all the CHPIDs of a subchannel are
configured in standby state, the subchannel is unregistered, which
contradicts the current subchannel specification.
Update the logic so that subchannels are not unregistered based
on the DNV value. Also update the SCHIB information even if the
DNV bit is zero.
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Fixes: 2297791c92 ("s390/cio: dont unregister subchannel from child-drivers")
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Remove the statement "continue" at the end of the loop
where it becomes useless.
Problem found with Coccinelle static analysis tool,
using continue.cocci script
(coccinelle.gitlabpages.inria.fr/website/rules/continue.cocci)
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Link: https://lore.kernel.org/r/20240924214612.38854-1-alessandro.zanni87@gmail.com
Signed-off-by: Nishanth Menon <nm@ti.com>
As commit cbe16f35be ("genirq: Add IRQF_NO_AUTOEN for request_irq/nmi()")
said, reqeust_irq() and then disable_irq() is unsafe. In the small time gap
between request_irq() and disable_irq(), interrupts can still come.
IRQF_NO_AUTOEN flag can be used by drivers to request_irq(). It prevents
the automatic enabling of the requested interrupt in the same
safe way. With that the usage can be simplified and corrected.
Compile-tested only.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240914082532.344456-1-ruanjinjie@huawei.com
Signed-off-by: Nishanth Menon <nm@ti.com>
This fix is part of a series on for-next, but it fixes broken builds so
I'm picking it up as a fix.
* commit 'bf40167d54':
riscv: vdso: Prevent the compiler from inserting calls to memset()
The macro is not used in the current version of kernel, it looks like
can be removed to avoid a build warning:
../arch/riscv/kernel/asm-offsets.c: At top level:
../arch/riscv/kernel/asm-offsets.c:7: warning: macro "GENERATING_ASM_OFFSETS" is not used [-Wunused-macros]
7 | #define GENERATING_ASM_OFFSETS
Fixes: 9639a44394 ("RISC-V: Provide a cleaner raw_smp_processor_id()")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Link: https://lore.kernel.org/r/20241008094141.549248-2-zhangchunyan@iscas.ac.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When populating cache leaves we previously fetched the CPU device node
at the very beginning. But when ACPI is enabled we go through a
specific branch which returns early and does not call 'of_node_put' for
the node that was acquired.
Since we are not using a CPU device node for the ACPI code anyways, we
can simply move the initialization of it just passed the ACPI block, and
we are guaranteed to have an 'of_node_put' call for the acquired node.
This prevents a bad reference count of the CPU device node.
Moreover, the previous function did not check for errors when acquiring
the device node, so a return -ENOENT has been added for that case.
Signed-off-by: Miquel Sabaté Solà <mikisabate@gmail.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Fixes: 604f32ea69 ("riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240913080053.36636-1-mikisabate@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The IMAGE_DLLCHARACTERISTICS_NX_COMPAT informs the firmware that the
EFI binary does not rely on pages that are both executable and
writable.
The flag is used by some distro versions of GRUB to decide if the EFI
binary may be executed.
As the Linux kernel neither has RWX sections nor needs RWX pages for
relocation we should set the flag.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Fixes: cb7d2dd561 ("RISC-V: Add PE/COFF header for EFI stub")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240929140233.211800-1-heinrich.schuchardt@canonical.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
During the discussion before supporting rust on riscv, it was decided
not to support gcc yet, due to differences in extension handling
compared to llvm (only the version of libclang matching the c compiler
is supported). Recently Jason Montleon reported [1] that building with
gcc caused build issues, due to unsupported arguments being passed to
libclang. After some discussion between myself and Miguel, it is better
to disable gcc + rust builds to match the original intent, and
subsequently support it when an appropriate set of extensions can be
deduced from the version of libclang.
Closes: https://lore.kernel.org/all/20240917000848.720765-2-jmontleo@redhat.com/ [1]
Link: https://lore.kernel.org/all/20240926-battering-revolt-6c6a7827413e@spud/ [2]
Fixes: 70a57b2472 ("RISC-V: enable building 64-bit kernels with rust support")
Cc: stable@vger.kernel.org
Reported-by: Jason Montleon <jmontleo@redhat.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20241001-playlist-deceiving-16ece2f440f5@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When SVPBMT is enabled, __acpi_map_table() will directly access the
data in DDR through the IO attribute, rather than through hardware
cache consistency, resulting in incorrect data in the obtained ACPI
table.
The log: ACPI: [ACPI:0x18] Invalid zero length.
We do not assume whether the bootloader flushes or not. We should
access in a cacheable way instead of maintaining cache consistency
by software.
Fixes: 3b426d4b5b ("RISC-V: ACPI : Fix for usage of pointers in different address space")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20241014130141.86426-1-cuiyunhui@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Some old Bay Trail tablets which shipped with Android as factory OS
have the SST/LPE audio engine described by an ACPI device with a
HID (Hardware-ID) of LPE0F28 instead of 80860F28.
Add support for this. Note this uses a new sst_res_info for just
the LPE0F28 case because it has a different layout for the IO-mem ACPI
resources then the 80860F28.
An example of a tablet which needs this is the Vexia EDU ATLA 10 tablet,
which has been distributed to schools in the Spanish Andalucía region.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241025090221.52198-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snps,dw-apb-gpio-port is deprecated since commit ef42a8da3c
("dt-bindings: gpio: dwapb: Add ngpios property support"). The
respective driver supports this since commit 7569486d79 ("gpio: dwapb:
Add ngpios DT-property support") which is included in Linux v5.10-rc1.
This change was created using
git grep -l snps,nr-gpios arch/riscv/boot/dts | xargs perl -p -i -e 's/\bsnps,nr-gpios\b/ngpios/
.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Fixes: a508d794f8 ("riscv: sophgo: dts: add gpio controllers for SG2042 SoC")
Link: https://lore.kernel.org/r/20241022091428.477697-8-u.kleine-koenig@baylibre.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
The first set of wireless fixes for v6.12. We have been busy and have
not been able to send this earlier, so there are more fixes than
usual. The fixes are all over, both in stack and in drivers, but
nothing special really standing out.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmcWl7MRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZv0Qgf/fQJKXkGJkvozrbJATkKHfHKUOphIl4Y8
/r3SlrsIL6qXZAUq5N+NH9vfUeKt5kkKG8Fc8yrJaygDLsV9v1LGiBSsb5eJ+PfM
4fCOdzPSrWG984dLwsCK8UGEzfQ1G4d6HckwubUMimK2X/m6wx/99fenjMAQvdWO
rjAJmpAkgoT0Fvf8GD3joMBKKjMFr2KT8tgbfvwpyr9cXAPZYf35+74Nl84UjHiP
rGTGN++NQuPMsYyYIPPA+eMNUnlUVyDah+UVmzsMp27YUdKBKjx23kRH6tKM/46H
dWqpqEV50xshlPaotHoFg9+4KRrxnxwvFtGTsnbvHcuSnkPBUusAvw==
=l6SI
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
wireless fixes for v6.12-rc5
The first set of wireless fixes for v6.12. We have been busy and have
not been able to send this earlier, so there are more fixes than
usual. The fixes are all over, both in stack and in drivers, but
nothing special really standing out.
Using 3 cells allows to pass additional flags and is the normal
abstraction for new PWM descriptions. There are no device trees yet to
adapt to this change.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Trevor Gamblin <tgamblin@baylibre.com>
Link: https://lore.kernel.org/r/20241024102554.711689-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
