Breno Leitao says:
====================
net: netconsole refactoring and warning fix
The netconsole driver was showing a warning related to userdata
information, depending on the message size being transmitted:
------------[ cut here ]------------
WARNING: CPU: 13 PID: 3013042 at drivers/net/netconsole.c:1122 write_ext_msg+0x3b6/0x3d0
? write_ext_msg+0x3b6/0x3d0
console_flush_all+0x1e9/0x330
...
Identifying the cause of this warning proved to be non-trivial due to:
* The write_ext_msg() function being over 100 lines long
* Extensive use of pointer arithmetic
* Inconsistent naming conventions and concept application
The send_ext_msg() function grew organically over time:
* Initially, the UDP packet consisted of a header and body
* Later additions included release prepend and userdata
* Naming became inconsistent (e.g., "body" excludes userdata, "header"
excludes prepended release)
This lack of consistency made investigating issues like the above warning
more challenging than what it should be.
To address these issues, the following steps were taken:
* Breaking down write_ext_msg() into smaller functions with clear scopes
* Improving readability and reasoning about the code
* Simplifying and clarifying naming conventions
Warning Fix
-----------
The warning occurred when there was insufficient buffer space to append
userdata. While this scenario is acceptable (as userdata can be sent in a
separate packet later), the kernel was incorrectly raising a warning. A
one-line fix has been implemented to resolve this issue.
The fix was already sent to net, and is already available in net-next
also.
v4:
* https://lore.kernel.org/all/20240930131214.3771313-1-leitao@debian.org/
v3:
* https://lore.kernel.org/all/20240910100410.2690012-1-leitao@debian.org/
v2:
* https://lore.kernel.org/all/20240909130756.2722126-1-leitao@debian.org/
v1:
* https://lore.kernel.org/all/20240903140757.2802765-1-leitao@debian.org/
====================
Link: https://patch.msgid.link/20241017095028.3131508-1-leitao@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor the send_msg_fragmented() function by extracting the logic for
sending the message body into a new function called
send_fragmented_body().
Now, send_msg_fragmented() handles appending the release and header, and
then delegates the task of breaking up the body and sending the
fragments to send_fragmented_body().
This is the final flow now:
When send_ext_msg_udp() is called to send a message, it will:
- call send_msg_no_fragmentation() if no fragmentation is needed
or
- call send_msg_fragmented() if fragmentation is needed
* send_msg_fragmented() appends the header to the buffer, which is
be persisted until the function returns
* call send_fragmented_body() to iterate and populate the body of
the message. It will not touch the header, and it will only
replace the body, writing the msgbody and/or userdata.
Also add some comment to make the code easier to review.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Do not pass userdata to send_msg_fragmented, since we can get it later.
This will be more useful in the next patch, where send_msg_fragmented()
will be split even more, and userdata is only necessary in the last
function.
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor the code by extracting the logic for appending the
release into the buffer into a separate function.
The goal is to reduce the size of send_msg_fragmented() and improve
code readability.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current check to determine if the message body was fully sent is
difficult to follow. To improve clarity, introduce a variable that
explicitly tracks whether the message body (msgbody) has been completely
sent, indicating when it's time to begin sending userdata.
Additionally, add comments to make the code more understandable for
others who may work with it.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This new variable tracks the total length of the data to be sent,
encompassing both the message body (msgbody) and userdata, which is
collectively called body.
By explicitly defining body_len, the code becomes clearer and easier to
reason about, simplifying offset calculations and improving overall
readability of the function.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With the introduction of the userdata concept, the term body has become
ambiguous and less intuitive.
To improve clarity, body is renamed to msg_body, making it clear that
the body is not the only content following the header.
In an upcoming patch, the term body_len will also be revised for further
clarity.
The current packet structure is as follows:
release, header, body, [msg_body + userdata]
Here, [msg_body + userdata] collectively forms what is currently
referred to as "body." This renaming helps to distinguish and better
understand each component of the packet.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Following the previous change, where the non-fragmented case was moved
to its own function, this update introduces a new function called
send_msg_fragmented to specifically manage scenarios where message
fragmentation is required.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The send_ext_msg_udp() function has become quite large, currently
spanning 102 lines. Its complexity, along with extensive pointer and
offset manipulation, makes it difficult to read and error-prone.
The function has evolved over time, and it’s now due for a refactor.
To improve readability and maintainability, isolate the case where no
message fragmentation occurs into a separate function, into a new
send_msg_no_fragmentation() function. This scenario covers about 95% of
the messages.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Variable msg_ready is useless, since it does not represent anything. Get
rid of it, using buf directly instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Every module should have a description, without this we get a
build time warning.
Fixes: cc3e8a216d ("drm/imx: add internal bridge handling display-timings DT node")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015073004.4066457-2-arnd@kernel.org
The driver now uses the legacy bridge helper code but can be configured
to get built without it:
ERROR: modpost: "devm_imx_drm_legacy_bridge" [drivers/gpu/drm/imx/ipuv3/parallel-display.ko] undefined!
Add the required dependency, same as in the ldb driver.
Fixes: f94b9707a1 ("drm/imx: parallel-display: switch to imx_legacy_bridge / drm_bridge_connector")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015073004.4066457-1-arnd@kernel.org
Change ynl-gen-c.py to use NLA_BE16 and NLA_BE32 types to represent
big-endian u16 and u32 ynl types.
Doing this enables those attributes to have range checks applied, as
the validator will then convert to host endianness prior to validation.
The autogenerated kernel/uapi code have been regenerated by running:
./tools/net/ynl/ynl-regen.sh -f
This changes the policy types of the following attributes:
FOU_ATTR_PORT (NLA_U16 -> NLA_BE16)
FOU_ATTR_PEER_PORT (NLA_U16 -> NLA_BE16)
These two are used with nla_get_be16/nla_put_be16().
MPTCP_PM_ADDR_ATTR_ADDR4 (NLA_U32 -> NLA_BE32)
This one is used with nla_get_in_addr/nla_put_in_addr(),
which uses nla_get_be32/nla_put_be32().
IOWs the generated changes are AFAICT aligned with their implementations.
The generated userspace code remains identical, and have been verified
by comparing the output generated by the following command:
make -C tools/net/ynl/generated
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241017094704.3222173-1-ast@fiberby.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In commit 9f428b95ac ("drm/mediatek: Add new color format MACROs in
OVL"), some new color formats are defined in the MACROs to make the
switch statement more concise. That commit was intended to be a no-op
cleanup. However, there are typos in these formats MACROs, which cause
the return value to be incorrect. Fix the typos to ensure the return
value remains unchanged.
Fixes: 9f428b95ac ("drm/mediatek: Add new color format MACROs in OVL")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241016-color-v3-1-e0f5f44a72d8@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Since some SoCs support premultiplied pixel formats but some do not,
the blend_modes parameter is added to mtk_plane_init(), which is
obtained from the mtk_ddp_comp_get_blend_modes function implemented
in different blending supported components.
The blending supported components can use driver data to set the
blend mode capabilities for different SoCs.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241009034646.13143-6-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
OVL_CON_CLRFMT_MAN is a configuration for extending color format
settings of DISP_REG_OVL_CON(n).
It will change some of the original color format settings.
Take the settings of (3 << 12) for example.
- If OVL_CON_CLRFMT_MAN = 0 means OVL_CON_CLRFMT_RGBA8888.
- If OVL_CON_CLRFMT_MAN = 1 means OVL_CON_CLRFMT_PARGB8888.
Since previous SoCs did not support OVL_CON_CLRFMT_MAN, this means
that the SoC does not support the premultiplied color format.
It will break the original color format setting of MT8173.
Therefore, the blend_modes is added to the driver data and then
mtk_ovl_fmt_convert() will check the blend_modes to see if
pre-multiplied is supported in the current platform.
If it is not supported, use coverage mode to set it to the supported
color formats to solve the degradation problem.
Fixes: a3f7f7ef4b ("drm/mediatek: Support "Pre-multiplied" blending in OVL")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241009034646.13143-5-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Since we changed MACROs to be consistent with DRM input color format
naming, the comment for ovl_fmt_conver() is no longer needed.
Fixes: 9f428b95ac ("drm/mediatek: Add new color format MACROs in OVL")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241009034646.13143-4-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add driver for the pincontrol device as present on the Qualcomm
SAR2130P platform. This is based on the msm-5.10 tree, tag
KERNEL.PLATFORM.1.0.r4-00400-NEO.0.
Co-developed-by: Mayank Grover <groverm@codeaurora.org>
Signed-off-by: Mayank Grover <groverm@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/20241018-sar2130p-tlmm-v2-2-11a1d09a6e5f@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Refine the comment for ignore_pixel_alpha flag and move it to
if(state->fb) statement to make it less conditional.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241009034646.13143-3-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add DT bindings for the TLMM controller on QCS8300 platforms.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Link: https://lore.kernel.org/20241018-qcs8300_tlmm-v3-1-8b8d3957cf1a@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
OVL_CON_AEN is for alpha blending enable.
For the SoC that is supported the blend_modes, OVL_CON_AEN will always
enabled to use constant alpha and then use the ignore_pixel_alpha bit
to do the alpha blending for XRGB8888 format.
Note that ignore pixel alpha bit is not supported if the SoC is not
supported the blend_modes.
So it will break the original setting of XRGB8888 format for the
blend_modes unsupported SoCs, such as MT8173.
To fix the downgrade issue, enable alpha blending only when a valid
blend_mode or has_alpha is set.
Fixes: bc46eb5d5d ("drm/mediatek: Support DRM plane alpha in OVL")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241009034646.13143-2-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
kstrdup_const() and kfree_const() can be confusing in code built as a
module. In such a case, it does not do what one could expect from the name
of the functions.
The code is not wrong by itself, but in such a case, it is equivalent to
kstrdup() and kfree().
So, keep thinks simple and straightforward.
This reverts commit 379b63e7e6 ("drm/i915/display: Save a few bytes of
memory in intel_backlight_device_register()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/f82be2ee3ac7d18dd9982b5368a88a5bf2aeb777.1727977199.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Use the existing macros in drm_dp.h for DPCD and DP AUX instead of
duplicating. Remove unused macros, as well as the duplicate definition
of DPCD_SIZE.
AUX_NATIVE_REPLY_NAK is left unchanged, as it does not match
DP_AUX_NATIVE_REPLY_NACK, and I'm not sure what the right thing to do is
here.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Zhi Wang <zhiwang@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930135342.3562755-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When mounting of a corrupted disk image fails, the error message printed
can reference uninitialized inode fields. To prevent that from happening,
always initialize those fields.
Reported-by: syzbot+aa0730b0a42646eb1359@syzkaller.appspotmail.com
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Petr Machata says:
====================
selftests: net: Introduce deferred commands
Recently, a defer helper was added to Python selftests. The idea is to keep
cleanup commands close to their dirtying counterparts, thereby making it
more transparent what is cleaning up what, making it harder to miss a
cleanup, and make the whole cleanup business exception safe. All these
benefits are applicable to bash as well, exception safety can be
interpreted in terms of safety vs. a SIGINT.
This patchset therefore introduces a framework of several helpers that
serve to schedule cleanups in bash selftests.
- Patch #1 has more details about the primitives being introduced.
Patch #2 adds a fallback cleanup() function to lib.sh, because ideally
selftests wouldn't need to introduce a dedicated cleanup function at all.
- Patch #3 adds a parameter to stop_traffic(), which makes it possible to
start other background processes after the traffic is started without
confusing the cleanup.
- Patches #4 to #10 convert a number of selftests.
The goal was to convert all tests that use start_traffic / stop_traffic
to the defer framework. Leftover traffic generators are a particularly
painful sort of a missed cleanup. Normal unfinished cleanups can usually
be cleaned up simply by rerunning the test and interrupting it early to
let the cleanups run again / in full. This does not work with
stop_traffic, because it is only issued at the end of the test case that
starts the traffic. At the same time, leftover traffic generators
influence follow-up test runs, and are hard to notice.
The tests were however converted whole-sale, not just their traffic bits.
Thus they form a proof of concept of the defer framework.
====================
Link: https://patch.msgid.link/cover.1729157566.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently log recovery never updates the in-core perag values for the
last allocation group when they were grown by growfs. This leads to
btree record validation failures for the alloc, ialloc or finotbt
trees if a transaction references this new space.
Found by Brian's new growfs recovery stress test.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
__GFP_RETRY_MAYFAIL increases the likelyhood of allocations to fail,
which isn't really helpful during log recovery. Remove the flag and
stick to the default GFP_KERNEL policies.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
XFS currently does not support reducing the agcount, so error out if
a logged sb buffer tries to shrink the agcount.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Primary superblock buffers that change the file system geometry after a
growfs operation can affect the operation of later CIL checkpoints that
make use of the newly added space and allocation groups.
Apply the changes to the in-memory structures as part of recovery pass 2,
to ensure recovery works fine for such cases.
In the future we should apply the logic to other updates such as features
bits as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
There is no good reason to have two different routines for freeing perag
structures for the unmount and error cases. Add two arguments to specify
the range of AGs to free to xfs_free_perag, and use that to replace
xfs_free_unused_perag_range.
The addition RCU grace period for the error case is harmless, and the
extra check for the AG to actually exist is not required now that the
callers pass the exact known allocated range.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Currently only the new agcount is passed to xfs_initialize_perag, which
requires lookups of existing AGs to skip them and complicates error
handling. Also pass the previous agcount so that the range that
xfs_initialize_perag operates on is exactly defined. That way the
extra lookups can be avoided, and error handling can clean up the
exact range from the old count to the last added perag structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Fix a minor bug where we fail repairs on metadata files that do not have
attr forks because xrep_metadata_inode_subtype doesn't filter ENOENT.
Cc: stable@vger.kernel.org # v6.8
Fixes: 5a8e07e799 ("xfs: repair the inode core and forks of a metadata inode")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Use the defer framework to schedule cleanups as soon as the command is
executed.
Note that the start_traffic commands in __burst_test() are each sending a
fixed number of packets (note the -c flag) and then ending. They therefore
do not need a matching stop_traffic.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Instead of having a suite of dedicated cleanup functions, use the defer
framework to schedule cleanups right as their setup functions are run.
The sleep after stop_traffic() in mlxsw selftests is necessary, but
scheduling it as "defer sleep; defer stop_traffic" is silly. Instead, add a
local helper to stop traffic and sleep afterwards.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that it is possible to schedule a deferral of stop_traffic() right
after the traffic is started, we do not have to rely on the %% magic to
kill the background process that was started last. Instead we can just give
the PID explicitly. This makes it possible to start other background
processes after the traffic is started without confusing the cleanup.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Consistent use of defers obviates the need for a separate test-specific
cleanup function -- everything is just taken care of in defers. So in this
patch, introduce a cleanup() helper in the forwarding lib.sh, which calls
just pre_cleanup() and defer_scopes_cleanup(). Selftests are obviously
still free to override the function.
Since pre_cleanup() is too entangled with forwarding-specific minutia, the
function cannot currently be in net/lib.sh.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In commit 8510801a9d ("selftests: drv-net: add ability to schedule
cleanup with defer()"), a defer helper was added to Python selftests.
The idea is to keep cleanup commands close to their dirtying counterparts,
thereby making it more transparent what is cleaning up what, making it
harder to miss a cleanup, and make the whole cleanup business exception
safe. All these benefits are applicable to bash as well, exception safety
can be interpreted in terms of safety vs. a SIGINT.
This patch therefore introduces a framework of several helpers that serve
to schedule cleanups in bash selftests:
- defer_scope_push(), defer_scope_pop(): Deferred statements can be batched
together in scopes. When a scope is popped, the deferred commands
scheduled in that scope are executed in the order opposite to order of
their scheduling.
- defer(): Schedules a defer to the most recently pushed scope (or the
default scope if none was pushed.)
- defer_prio(): Schedules a defer on the priority track. The priority defer
queue is run before the default defer queue when scope is popped.
The issue that this is addressing is specifically the one of restoring
devlink shared buffer threshold type. When setting up static thresholds,
one has to first change the threshold type to static, then override the
individual thresholds. When cleaning up, it would be natural to reset the
threshold values first, then change the threshold type. But the values
that are valid for dynamic thresholds are generally invalid for static
thresholds and vice versa. Attempts to restore the values first would be
bounced. Thus one has to first reset the threshold type, then adjust the
thresholds.
(You could argue that the shared buffer threshold type API is broken and
you would be right, but here we are.)
This cannot be solved by pure defers easily. I considered making it
possible to disable an existing defer, so that one could then schedule a
new defer and disable the original. But this forward-shifting of the
defer job would have to take place after every threshold-adjusting
command, which would make it very awkward to schedule these jobs.
- defer_scopes_cleanup(): Pops any unpopped scopes, including the default
one. The selftests that use defer should run this in their exit trap.
This is important to get cleanups of interrupted scripts.
- in_defer_scope(): Sometimes a function would like to introduce a new
defer scope, then run whatever it is that it wants to run, and then pop
the scope to run the deferred cleanups. The helper in_defer_scope() can
be used to run another command within such environment, such that any
scheduled defers run after the command finishes.
The framework is added as a separate file lib/sh/defer.sh so that it can be
used by all bash selftests, including those that do not currently use
lib.sh. lib.sh however includes the file by default, because ideally all
tests would use these helpers instead of hand-rolling their cleanups.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ES8328/ES8388 audio codec is currently used in conjunction with
audio-graph-card to provide an endpoint for binding with the other side
of the audio link.
This is achieved via the 'port' property, which is not supported by the
binding:
rk3588s-indiedroid-nova.dtb: audio-codec@11: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/sound/everest,es8328.yaml#
Document the missing property.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20241019-es8328-doc-port-v1-1-25c1d1b5c65c@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The fix for MAC addresses broke detection of the naming convention
because it gave network devices no random MAC before bind()
was called. This means that the check for the local assignment bit
was always negative as the address was zeroed from allocation,
instead of from overwriting the MAC with a unique hardware address.
The correct check for whether bind() has altered the MAC is
done with is_zero_ether_addr
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: Greg Thelen <gthelen@google.com>
Diagnosed-by: John Sperbeck <jsperbeck@google.com>
Fixes: bab8eb0dd4 ("usbnet: modern method to get random MAC")
Link: https://patch.msgid.link/20241017071849.389636-1-oneukum@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for SCPSYS power domains of MT6735. All non-CPU power domains
are added except for MD2 (C2K modem), which is left out due to issues
with powering it on.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241017085136.68053-3-y.oudjana@protonmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
