Save a copy of the entire struct intel_scu_ipc_data for easier
maintenance in case of expanding (adding new members become simpler).
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241021133705.2933464-6-andriy.shevchenko@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Convert to use usual pattern, i.e. check for errors first. This makes
code less indented and easier to read after all.
Tested-by: Ferry Toth <fntoth@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241021133705.2933464-5-andriy.shevchenko@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use macros defined in linux/cleanup.h to automate resource lifetime
control in the driver.
Tested-by: Ferry Toth <fntoth@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241021133705.2933464-4-andriy.shevchenko@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The theory is that the so called workaround in pwr_reg_rdwr() is
the actual reader of the data in 32-bit chunks. For some reason
the 8-bit IO won't fail after that. Replace the workaround by using
32-bit IO explicitly and then memcpy() as much data as was requested
by the user. The same approach is already in use in
intel_scu_ipc_dev_command_with_size().
Tested-by: Ferry Toth <fntoth@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241021133705.2933464-3-andriy.shevchenko@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Unify the flow in pwr_reg_rdwr() with intel_scu_ipc_dev_command_with_size().
While read buffer is not currently being used by the callers of
pwr_reg_rdwr(), this might change in the future. For the existing code
it's a harmless change because the read data for the write operation
is simply discarded.
Tested-by: Ferry Toth <fntoth@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241021133705.2933464-2-andriy.shevchenko@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add driver for the Qualcomm interconnect buses found in QCS615
based platforms. The topology consists of several NoCs that are
controlled by a remote processor that collects the aggregated
bandwidth for each master-slave pairs.
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Link: https://lore.kernel.org/r/20240924143958.25-3-quic_rlaggysh@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Document the RPMh Network-On-Chip Interconnect of the QCS615 platform.
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240924143958.25-2-quic_rlaggysh@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
show() must not use snprintf() when formatting the value to be
returned to user space.
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Link: https://lore.kernel.org/r/20241022030500.9986-1-zenghongling@kylinos.cn
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Document the RPMh Network-On-Chip Interconnect of the QCS8300 platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Link: https://lore.kernel.org/r/20240910101013.3020-2-quic_rlaggysh@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
rename qos_clks_required flag to qos_requires_clocks in qcom_icc_desc
structure. This flag indicates that clocks are required for accessing
and programming the QoS registers.
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Link: https://lore.kernel.org/r/20240911093516.22347-1-quic_rlaggysh@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Return -EPROBE_DEFER from interconnect provider incase probe defer is
received from devm_clk_bulk_get_all(). This would help in reattempting
the inteconnect driver probe, once the required QoS clocks are
available.
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Fixes: 0a7be6b35d ("interconnect: qcom: icc-rpmh: Add QoS configuration support")
Link: https://lore.kernel.org/r/20240911094516.16901-1-quic_rlaggysh@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Tidy up the ACPI and OF ID tables:
- remove explicit driver_data initializer
- drop comma in the terminator entry
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241018134550.2071101-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The complexity of config guards needed for ACPI_PTR() is not worthwhile
for the small amount of saved data. This example was doing it correctly
but I am proposing dropping this so as to reduce chance of cut and paste
where it is done wrong.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241018134550.2071101-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There are three definitions for the property names. Remove them as:
1) each of them is only used once;
2) in all cases the definition is longer than the value.
In the result code is better and grepping on the property immediately
gets the function in which is being used which helps to guess the type
of the value.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241018134550.2071101-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
debounce_setup() stores the debounce_period_us if the driver supports
debounce, but the debounce_period_us is also stored where debounce_setup()
is called, independent of whether the debounce is being perfomed by
hardware or software.
Remove the redundant storing of the debounce_period_us in
debounce_setup().
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241020115238.170994-1-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Every now and then - despite being clearly documented as deprecated -
the legacy GPIO API is being used in some new drivers in the kernel. Add
a keyword pattern matching the unwanted functions so that I get Cc'ed
anytime they're being used and get the chance to object.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241017071835.19069-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The ST M24256E behaves as a regular M24C256, except for the E variant
which uses up another I2C address for Additional Write lockable page.
This page is 64 Bytes long and can contain additional data. Add entry
for it, so users can describe that page in DT. Note that users still
have to describe the main M24C256 area separately as that is on separate
I2C address from this page.
Unlike M24C32-D and M24C64-D, this part is specifically ST and does not
have any comparable M24* counterparts from other vendors, hence the st,
vendor prefix. Furthermore, the part name is M24256E without C between
the 24 and 256, this is not a typo. Finally, there is M24C256-D part,
which does contain 32 Bytes long Additional Write lockable page, which
is a different part and not supported by this patch.
Datasheet: https://www.st.com/resource/en/datasheet/m24256e-f.pdf
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20241017184152.128395-2-marex@denx.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The ST M24256E behaves as a regular M24C256, except for the E variant
which uses up another I2C address for Additional Write lockable page.
This page is 64 Bytes long and can contain additional data. Add entry
for it, so users can describe that page in DT. Note that users still
have to describe the main M24C256 area separately as that is on separate
I2C address from this page.
Unlike M24C32-D and M24C64-D, this part is specifically ST and does not
have any comparable M24* counterparts from other vendors, hence the st,
vendor prefix. Furthermore, the part name is M24256E without C between
the 24 and 256, this is not a typo. Finally, there is M24C256-D part,
which does contain 32 Bytes long Additional Write lockable page, which
is a different part and not supported by this patch.
Datasheet: https://www.st.com/resource/en/datasheet/m24256e-f.pdf
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20241017184152.128395-1-marex@denx.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Fix anatop thermal related dtbs_check warnings about node name
and missing thermal-cells property.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We currently only notify user-space about line config changes that are
made from user-space. Any kernel config changes are not signalled.
Let's improve the situation by emitting the events closer to the source.
To that end let's call the relevant notifier chain from the functions
setting direction, gpiod_set_config(), gpiod_set_consumer_name() and
gpiod_toggle_active_low(). This covers all the options that we can
inform the user-space about. We ignore events which don't have
corresponding flags exported to user-space on purpose - otherwise the
user would see a config-changed event but the associated line-info would
remain unchanged.
gpiod_direction_output/input() can be called from any context.
Fortunately, we now emit line state events using an atomic notifier
chain, so it's no longer an issue.
Let's also add non-notifying wrappers around the direction setters in
order to not emit superfluous reconfigure events when requesting the
lines as the initial config should be part of the request notification.
Use gpio_do_set_config() instead of gpiod_set_debounce() for configuring
debouncing via hardware from the character device code to avoid multiple
reconfigure events.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-8-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
With everything else ready, we can now switch to using the atomic
notifier for line state events which will allow us to notify user-space
about direction changes from atomic context.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-7-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In order to allow line state notifications to be emitted from atomic
context (for instance: from gpiod_direction_input/output()), we must
stop calling any sleeping functions in lineinfo_changed_notify(). To
that end let's use the new workqueue.
Let's atomically allocate small structures containing the required data
and fill it with information immediately upon being notified about the
change except for the pinctrl state which will be retrieved later from
process context. We can pretty reliably do this as pin functions are
typically set once per boot.
Let's make sure to bump the reference count of GPIO device and the GPIO
character device file descriptor to keep both alive until the event was
queued.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-6-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In order to prepare the line state notification mechanism for working in
atomic context as well, add a dedicated, high-priority, ordered
workqueue to GPIO device which will be used to queue the events fron any
context for them to be emitted always in process context.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-5-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In order to prepare gpio_desc_to_lineinfo() to being called from atomic
context, add a new argument - bool atomic - which, if set, indicates
that no sleeping functions must be called (currently: only
pinctrl_gpio_can_use_line()).
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-4-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This effectively reverts commits 9344e34e79 ("gpiolib: cdev: relocate
debounce_period_us from struct gpio_desc") and d8543cbaf9 ("gpiolib:
remove debounce_period_us from struct gpio_desc") and goes back to
storing the debounce period in microseconds in the GPIO descriptor
We're doing it in preparation for notifying the user-space about
in-kernel line config changes.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-3-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We don't need to guard the GPIO chip until its first dereference in
gpio_do_set_config().
First: change the prototype of gpio_do_set_config() to take the GPIO
line descriptor as argument, then move the gpio_chip protection into it
and drop it in two places where it's done too early.
This has the added benefit of making gpio_go_set_config() safe to use
from outside of this compilation unit without taking the gdev SRCU read
lock and will come in handy when we'll want to make it available to the
character device code.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-2-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We notify user-space about lines being requested from user-space or by
drivers calling gpiod_get() but not when drivers request their own lines
so add the missing call to gpiod_line_state_notify().
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-1-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The GW75xx has a LIS2DE12TR 3-axis accelerometer on the I2C bus with an
interrupt pin. Add it to the device-tree.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
objpool intends to use vmalloc for default (non-atomic) allocations of
percpu slots and objects. However, the condition checking if GFP flags
set any bit of GFP_ATOMIC is wrong b/c GFP_ATOMIC is a combination of bits
(__GFP_HIGH|__GFP_KSWAPD_RECLAIM) and so `pool->gfp & GFP_ATOMIC` will
be true if either bit is set. Since GFP_ATOMIC and GFP_KERNEL share the
___GFP_KSWAPD_RECLAIM bit, kmalloc will be used in cases when GFP_KERNEL
is specified, i.e. in all current usages of objpool.
This may lead to unexpected OOM errors since kmalloc cannot allocate
large amounts of memory.
For instance, objpool is used by fprobe rethook which in turn is used by
BPF kretprobe.multi and kprobe.session probe types. Trying to attach
these to all kernel functions with libbpf using
SEC("kprobe.session/*")
int kprobe(struct pt_regs *ctx)
{
[...]
}
fails on objpool slot allocation with ENOMEM.
Fix the condition to truly use vmalloc by default.
Link: https://lore.kernel.org/all/20240826060718.267261-1-vmalik@redhat.com/
Fixes: b4edb8d2d4 ("lib: objpool added: ring-array based lockless MPMC")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Matt Wu <wuqiang.matt@bytedance.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Wasn't documented so far, mention that it is mostly used in the shell
regression tests.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Clark Williams <williams@redhat.com>
Link: https://lore.kernel.org/r/20241020021842.1752770-4-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Using it:
$ perf test -w noplop
No workload found: noplop
$
$ perf test -w
Error: switch `w' requires a value
Usage: perf test [<options>] [{list <test-name-fragment>|[<test-name-fragments>|<test-numbers>]}]
-w, --workload <work>
workload to run for testing, use '--list-workloads' to list the available ones.
$
$ perf test --list-workloads
noploop
thloop
leafloop
sqrtloop
brstack
datasym
landlock
$
Would be good at some point to have a description in 'struct test_workload'.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Clark Williams <williams@redhat.com>
Link: https://lore.kernel.org/r/20241020021842.1752770-3-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add PCIe support on i.MX8DXL EVK board.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add PCIe support for i.MX8QXP, i.MX8QM and i.MX8DXL.
Add SATA support for i.MX8QM, which is in hsio subsystem and is shared with
PCIe PHY.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
