The first boards show up with Realtek's RTL8125D. This MAC/PHY chip
comes with an integrated 2.5Gbps PHY with ID 0x001cc841. It's not
clear yet whether there's an external version of this PHY and how
Realtek calls it, therefore use the numeric id for now.
Link: https://lore.kernel.org/netdev/2ada65e1-5dfa-456c-9334-2bc51272e9da@gmail.com/T/
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Message-ID: <7d2924de-053b-44d2-a479-870dc3878170@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Run airoha_qdma_cleanup_tx_queue() in ndo_stop callback in order to
unmap pending skbs. Moreover, reset BQL txq state stopping the netdevice,
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Message-ID: <20241017-airoha-en7581-reset-bql-v1-1-08c0c9888de5@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
This patch propagates error code correctly in cal_cycle()
and improve with FIELD_GET().
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
This patch shrinks line wrapping to 80 chars. Also, in
tx_amp_fill_result(), use FIELD_PREP() to prettify code.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
This patch fixes spelling errors, re-arrange vars with
reverse Xmas tree and remove unnecessary parens in
mediatek-ge-soc.c.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Remove rtl_dash_loop_wait_high/low to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <fb8c490c-2d92-48f5-8bbf-1fc1f2ee1649@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
In case of a problem with firmware loading we inform at the driver level,
in addition the firmware load code itself issues warnings. Therefore
switch to firmware_request_nowarn() to avoid duplicated error messages.
In addition switch to warn level because the firmware is optional and
typically just fixes compatibility issues.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <d9c5094c-89a6-40e2-b5fe-8df7df4624ef@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
So far we use a custom flag to define when a task can be scheduled and
when not. Let's use the standard mechanism with disable_work() et al
instead.
Note that in rtl8169_close() we can remove the call to cancel_work()
because we now call disable_work_sync() in rtl8169_down() already.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
There's not really a benefit here in taking the RTNL lock. The task
handler does exception handling only, so we're in trouble anyway when
we come here, and there's no need to protect against e.g. a parallel
ethtool call.
A benefit of removing the RTNL lock here is that we now can
synchronously cancel the workqueue from a context holding the RTNL mutex.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
fbnic fails to link as built-in when PTP support is in a loadable
module:
aarch64-linux-ld: drivers/net/ethernet/meta/fbnic/fbnic_ethtool.o: in function `fbnic_get_ts_info':
fbnic_ethtool.c:(.text+0x428): undefined reference to `ptp_clock_index'
aarch64-linux-ld: drivers/net/ethernet/meta/fbnic/fbnic_time.o: in function `fbnic_time_start':
fbnic_time.c:(.text+0x820): undefined reference to `ptp_schedule_worker'
aarch64-linux-ld: drivers/net/ethernet/meta/fbnic/fbnic_time.o: in function `fbnic_ptp_setup':
fbnic_time.c:(.text+0xa68): undefined reference to `ptp_clock_register'
Add the appropriate dependency to enforce this.
Fixes: 6a2b3ede95 ("eth: fbnic: add RX packets timestamping support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Message-ID: <20241016062303.2551686-1-arnd@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
samples/pktgen is missing in the MAINTAINERS file.
Suggested-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Message-ID: <20241018005301.10052-1-liuhangbin@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Mapping all my previously used emails to my kernel.org email.
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Message-ID: <172909057364.2452383.8019986488234344607.stgit@firesoul>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
mv88e6393x_port_set_policy doesn't correctly shift the ptr value when
converting the policy format between the old and new styles, so the
target register ends up with the ptr being written over the data bits.
Shift the pointer to align with the format expected by
mv88e6393x_port_policy_write().
Fixes: 6584b26020 ("net: dsa: mv88e6xxx: implement .port_set_policy for Amethyst")
Signed-off-by: Peter Rashleigh <peter@rashleigh.ca>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <20241016040822.3917-1-peter@rashleigh.ca>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
It is common practice in Rust to indent the next line the same amount of
space as the previous one if both belong to the same list item. Clippy
checks for this with the lint `doc_lazy_continuation`.
error: doc list item without indentation
--> drivers/gpu/drm/drm_panic_qr.rs:979:5
|
979 | /// conversion to numeric segments.
| ^
|
= help: if this is supposed to be its own paragraph, add a blank line
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation
= note: `-D clippy::doc-lazy-continuation` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::doc_lazy_continuation)]`
help: indent this line
|
979 | /// conversion to numeric segments.
| ++
Indent the offending line by 2 more spaces to remove this Clippy error.
Fixes: cb5164ac43 ("drm/panic: Add a QR code panic screen")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1123
Signed-off-by: Thomas Böhler <witcher@wiredspace.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20241019084048.22336-6-witcher@wiredspace.de
[ Reworded to indent Clippy's message. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Rust allows initializing fields of a struct without specifying the
attribute that is assigned if the variable has the same name. In this
instance this is done for all other attributes of the struct except for
`data`. Clippy notes the redundant field name:
error: redundant field names in struct initialization
--> drivers/gpu/drm/drm_panic_qr.rs:495:13
|
495 | data: data,
| ^^^^^^^^^^ help: replace it with: `data`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
= note: `-D clippy::redundant-field-names` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::redundant_field_names)]`
Remove the redundant `data` in the assignment to be consistent.
Fixes: cb5164ac43 ("drm/panic: Add a QR code panic screen")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1123
Signed-off-by: Thomas Böhler <witcher@wiredspace.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20241019084048.22336-5-witcher@wiredspace.de
[ Reworded to add Clippy warning like it is done in the rest of the
series. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Eliding lifetimes when possible instead of specifying them directly is
both shorter and easier to read. Clippy notes this in the
`needless_lifetimes` lint:
error: the following explicit lifetimes could be elided: 'b
--> drivers/gpu/drm/drm_panic_qr.rs:479:16
|
479 | fn new<'a, 'b>(segments: &[&Segment<'b>], data: &'a mut [u8]) -> Option<EncodedMsg<'a>> {
| ^^ ^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_lifetimes
= note: `-D clippy::needless-lifetimes` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::needless_lifetimes)]`
help: elide the lifetimes
|
479 - fn new<'a, 'b>(segments: &[&Segment<'b>], data: &'a mut [u8]) -> Option<EncodedMsg<'a>> {
479 + fn new<'a>(segments: &[&Segment<'_>], data: &'a mut [u8]) -> Option<EncodedMsg<'a>> {
|
Remove the explicit lifetime annotation in favour of an elided lifetime.
Fixes: cb5164ac43 ("drm/panic: Add a QR code panic screen")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1123
Signed-off-by: Thomas Böhler <witcher@wiredspace.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20241019084048.22336-4-witcher@wiredspace.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The function `alignment_pattern` returns a static reference to a `u8`
slice. The borrow of the returned element in `ALIGNMENT_PATTERNS` is
already a reference as defined in the array definition above so this
borrow is unnecessary and removed by the compiler. Clippy notes this in
`needless_borrow`:
error: this expression creates a reference which is immediately dereferenced by the compiler
--> drivers/gpu/drm/drm_panic_qr.rs:245:9
|
245 | &ALIGNMENT_PATTERNS[self.0 - 1]
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: change this to: `ALIGNMENT_PATTERNS[self.0 - 1]`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
= note: `-D clippy::needless-borrow` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::needless_borrow)]`
Remove the unnecessary borrow.
Fixes: cb5164ac43 ("drm/panic: Add a QR code panic screen")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1123
Signed-off-by: Thomas Böhler <witcher@wiredspace.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20241019084048.22336-3-witcher@wiredspace.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Rust's standard library's `std::iter::Iterator` trait provides a function
`find` that finds the first element that satisfies a predicate.
The function `Version::from_segments` is doing the same thing but is
implementing the same logic itself.
Clippy complains about this in the `manual_find` lint:
error: manual implementation of `Iterator::find`
--> drivers/gpu/drm/drm_panic_qr.rs:212:9
|
212 | / for v in (1..=40).map(|k| Version(k)) {
213 | | if v.max_data() * 8 >= segments.iter().map(|s| s.total_size_bits(v)).sum() {
214 | | return Some(v);
215 | | }
216 | | }
217 | | None
| |____________^ help: replace with an iterator: `(1..=40).map(|k| Version(k)).find(|&v| v.max_data() * 8 >= segments.iter().map(|s| s.total_size_bits(v)).sum())`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_find
= note: `-D clippy::manual-find` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::manual_find)]`
Use `Iterator::find` instead to make the intention clearer.
At the same time, clean up the redundant closure that Clippy warns
about too:
error: redundant closure
--> drivers/gpu/drm/drm_panic_qr.rs:212:31
|
212 | for v in (1..=40).map(|k| Version(k)) {
| ^^^^^^^^^^^^^^ help: replace the closure with the function itself: `Version`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_closure
= note: `-D clippy::redundant-closure` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::redundant_closure)]`
Fixes: cb5164ac43 ("drm/panic: Add a QR code panic screen")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1123
Signed-off-by: Thomas Böhler <witcher@wiredspace.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20241019084048.22336-2-witcher@wiredspace.de
[ Reworded to mention the redundant closure cleanup too. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Ignore nCR3[4:0] when loading PDPTEs from memory for nested SVM, as bits
4:0 of CR3 are ignored when PAE paging is used, and thus VMRUN doesn't
enforce 32-byte alignment of nCR3.
In the absolute worst case scenario, failure to ignore bits 4:0 can result
in an out-of-bounds read, e.g. if the target page is at the end of a
memslot, and the VMM isn't using guard pages.
Per the APM:
The CR3 register points to the base address of the page-directory-pointer
table. The page-directory-pointer table is aligned on a 32-byte boundary,
with the low 5 address bits 4:0 assumed to be 0.
And the SDM's much more explicit:
4:0 Ignored
Note, KVM gets this right when loading PDPTRs, it's only the nSVM flow
that is broken.
Fixes: e4e517b4be ("KVM: MMU: Do not unconditionally read PDPTE from guest memory")
Reported-by: Kirk Swidowski <swidowski@google.com>
Cc: Andy Nguyen <theflow@google.com>
Cc: 3pvd <3pvd@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20241009140838.1036226-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reset the segment cache after segment initialization in vmx_vcpu_reset()
to harden KVM against caching stale/uninitialized data. Without the
recent fix to bypass the cache in kvm_arch_vcpu_put(), the following
scenario is possible:
- vCPU is just created, and the vCPU thread is preempted before
SS.AR_BYTES is written in vmx_vcpu_reset().
- When scheduling out the vCPU task, kvm_arch_vcpu_in_kernel() =>
vmx_get_cpl() reads and caches '0' for SS.AR_BYTES.
- vmx_vcpu_reset() => seg_setup() configures SS.AR_BYTES, but doesn't
invoke vmx_segment_cache_clear() to invalidate the cache.
As a result, KVM retains a stale value in the cache, which can be read,
e.g. via KVM_GET_SREGS. Usually this is not a problem because the VMX
segment cache is reset on each VM-Exit, but if the userspace VMM (e.g KVM
selftests) reads and writes system registers just after the vCPU was
created, _without_ modifying SS.AR_BYTES, userspace will write back the
stale '0' value and ultimately will trigger a VM-Entry failure due to
incorrect SS segment type.
Invalidating the cache after writing the VMCS doesn't address the general
issue of cache accesses from IRQ context being unsafe, but it does prevent
KVM from clobbering the VMCS, i.e. mitigates the harm done _if_ KVM has a
bug that results in an unsafe cache access.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Fixes: 2fb92db1ec ("KVM: VMX: Cache vmcs segment fields")
[sean: rework changelog to account for previous patch]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20241009175002.1118178-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Massage the documentation for KVM_X86_QUIRK_SLOT_ZAP_ALL to call out that
it applies to moved memslots as well as deleted memslots, to avoid KVM's
"fast zap" terminology (which has no meaning for userspace), and to reword
the documented targeted zap behavior to specifically say that KVM _may_
zap a subset of all SPTEs. As evidenced by the fix to zap non-leafs SPTEs
with gPTEs, formally documenting KVM's exact internal behavior is risky
and unnecessary.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20241009192345.1148353-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a lockdep assertion in kvm_unmap_gfn_range() to ensure that either
mmu_invalidate_in_progress is elevated, or that the range is being zapped
due to memslot removal (loosely detected by slots_lock being held).
Zapping SPTEs without mmu_invalidate_{in_progress,seq} protection is unsafe
as KVM's page fault path snapshots state before acquiring mmu_lock, and
thus can create SPTEs with stale information if vCPUs aren't forced to
retry faults (due to seeing an in-progress or past MMU invalidation).
Memslot removal is a special case, as the memslot is retrieved outside of
mmu_invalidate_seq, i.e. doesn't use the "standard" protections, and
instead relies on SRCU synchronization to ensure any in-flight page faults
are fully resolved before zapping SPTEs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20241009192345.1148353-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When performing a targeted zap on memslot removal, zap only MMU pages that
shadow guest PTEs, as zapping all SPs that "match" the gfn is inexact and
unnecessary. Furthermore, for_each_gfn_valid_sp() arguably shouldn't
exist, because it doesn't do what most people would it expect it to do.
The "round gfn for level" adjustment that is done for direct SPs (no gPTE)
means that the exact gfn comparison will not get a match, even when a SP
does "cover" a gfn, or was even created specifically for a gfn.
For memslot deletion specifically, KVM's behavior will vary significantly
based on the size and alignment of a memslot, and in weird ways. E.g. for
a 4KiB memslot, KVM will zap more SPs if the slot is 1GiB aligned than if
it's only 4KiB aligned. And as described below, zapping SPs in the
aligned case overzaps for direct MMUs, as odds are good the upper-level
SPs are serving other memslots.
To iterate over all potentially-relevant gfns, KVM would need to make a
pass over the hash table for each level, with the gfn used for lookup
rounded for said level. And then check that the SP is of the correct
level, too, e.g. to avoid over-zapping.
But even then, KVM would massively overzap, as processing every level is
all but guaranteed to zap SPs that serve other memslots, especially if the
memslot being removed is relatively small. KVM could mitigate that issue
by processing only levels that can be possible guest huge pages, i.e. are
less likely to be re-used for other memslot, but while somewhat logical,
that's quite arbitrary and would be a bit of a mess to implement.
So, zap only SPs with gPTEs, as the resulting behavior is easy to describe,
is predictable, and is explicitly minimal, i.e. KVM only zaps SPs that
absolutely must be zapped.
Cc: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20241009192345.1148353-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD SEV-SNP and Intel TDX have limited access to MTRR: either it is not
advertised in CPUID or it cannot be programmed (on TDX, due to #VE on
CR0.CD clear).
This results in guests using uncached mappings where it shouldn't and
pmd/pud_set_huge() failures due to non-uniform memory type reported by
mtrr_type_lookup().
Override MTRR state, making it WB by default as the kernel does for
Hyper-V guests.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Suggested-by: Binbin Wu <binbin.wu@intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20241015095818.357915-1-kirill.shutemov@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The last use of kvm_vcpu_gfn_to_pfn_atomic was removed by commit
1bbc60d0c7 ("KVM: x86/mmu: Remove MMU auditing")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Message-ID: <20241001141354.18009-3-linux@treblig.org>
[Adjust Documentation/virt/kvm/locking.rst. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The last use of kvm_vcpu_gfn_to_pfn was removed by commit
b1624f99aa ("KVM: Remove kvm_vcpu_gfn_to_page() and kvm_vcpu_gpa_to_page()")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Message-ID: <20241001141354.18009-2-linux@treblig.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Anbernic RG35XX devices use an SPI LCD panel from an unknown OEM,
with an NV3052C driver chip.
As discussed previously, the integrating vendor and device name are
preferred instead of the OEM serial. A previous patch corrected the
device tree binding and of_device_id in the NV3052C driver, however the
spi_device_id also needs correction.
Correct the spi_device_id for the RG35XX panel.
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Fixes: 76dce2a96c ("drm: panel: nv3052c: Correct WL-355608-A8 panel compatible")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241020083836.175733-1-ryan@testtoast.com
[DB: corrected the Fixes tag]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Use the '__free(device_node)' macro to automatically free the device
node, removing the need for explicit calls to 'of_node_put()' to
decrement its refcount.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241010-input_automate_of_node_put-v1-10-ebc62138fbf8@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the '__free(device_node)' macro to automatically free the device
node, removing the need for explicit calls to 'of_node_put()' to
decrement its refcount.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241010-input_automate_of_node_put-v1-9-ebc62138fbf8@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the '__free(device_node)' macro to automatically free the device
node, removing the need for explicit calls to 'of_node_put()' to
decrement its refcount.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241010-input_automate_of_node_put-v1-8-ebc62138fbf8@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the '__free(device_node)' macro to simplify the code and error
handling. This makes the code more robust by ensuring that the device
node is always freed.
Drop the first assignment to 'pdev->dev.parent->of_node', as it was only
a shortcut, and tie 'np' to its usage as a child node.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241010-input_automate_of_node_put-v1-7-ebc62138fbf8@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the '__free(device_node)' macro to simplify the code and error
handling. This makes the error handling more robust by ensuring that the
device node is always freed.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241010-input_automate_of_node_put-v1-4-ebc62138fbf8@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the scoped variant of the macro to simplify the code and error
handling. This makes the error handling more robust by ensuring that
the child node is always freed.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20241010-input_automate_of_node_put-v1-3-ebc62138fbf8@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the scoped variant of the macro to simplify the code and error
handling. This makes the error handling more robust by ensuring that
the child node is always freed.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241010-input_automate_of_node_put-v1-2-ebc62138fbf8@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the scoped variant of the macro to simplify the code and error
handling. This makes the error handling more robust by ensuring that
the child node is always freed.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241010-input_automate_of_node_put-v1-1-ebc62138fbf8@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The return type of error code of rtw8852c_pwr_{on,off}_func() and its
callee is 'int'. Correct it.
Addresses-Coverity-ID: 1626056 ("Overflowed constant")
Addresses-Coverity-ID: 1627945 ("Overflowed constant")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241009004300.8144-7-pkshih@realtek.com
The return type of error code of rtw8852bt_pwr_{on,off}_func() and its
callee is 'int'. Correct it.
Addresses-Coverity-ID: 1630962 ("Overflowed constant")
Addresses-Coverity-ID: 1632126 ("Overflowed constant")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241009004300.8144-6-pkshih@realtek.com
The return type of error code of rtw8852b_pwr_{on,off}_func() and its
callee is 'int'. Correct it.
Addresses-Coverity-ID: 1622433 ("Overflowed constant")
Addresses-Coverity-ID: 1630710 ("Overflowed constant")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241009004300.8144-5-pkshih@realtek.com
The return type of error code of rtw8851b_pwr_{on,off}_func() and its
callee is 'int'. Correct it.
Addresses-Coverity-ID: 1624679 ("Overflowed constant")
Addresses-Coverity-ID: 1630970 ("Overflowed constant")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241009004300.8144-4-pkshih@realtek.com
The return type of error code of read_poll_timeout() and
rtw89_pci_poll_{tx,rx}dma_ch_idle_ax() and must be 'int'.
Correct them accordingly.
Addresses-Coverity-ID: 1622341 ("Overflowed constant")
Addresses-Coverity-ID: 1627296 ("Overflowed constant")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241009004300.8144-3-pkshih@realtek.com
The type of tsf arithmetic is
u64 += u16 * int;
When (u16 * int) is larger than 0x7FFFFFFF, the value casting to u64 with
sign-extension will become all 1 in upper 32 bits part.
To meet the case, u16 value should be larger than 20491
(0x7FFFFFFF / 104800). Fortunately the meaning of 20491 is delay time of
WoWLAN net detection in unit of second, so 20491 seconds (5.7 hours)
might not a real case we can meet.
Addresses-Coverity-ID: 1620910 ("Unintended sign extension")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241009004300.8144-2-pkshih@realtek.com
Rejection of IOSQE_FIXED_FILE combined with IORING_OP_[GS]ETXATTR
is fine - these do not take a file descriptor, so such combination
makes no sense. The checks are misplaced, though - as it is, they
triggers on IORING_OP_F[GS]ETXATTR as well, and those do take
a file reference, no matter the origin.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Semantics used by statx(2) (and later *xattrat(2)): without AT_EMPTY_PATH
it's standard getname() (i.e. ERR_PTR(-ENOENT) on empty string,
ERR_PTR(-EFAULT) on NULL), with AT_EMPTY_PATH both empty string and
NULL are accepted.
Calling conventions: getname_maybe_null(user_pointer, flags) returns
* pointer to struct filename when non-empty string had been
successfully read
* ERR_PTR(...) on error
* NULL if an empty string or NULL pointer had been given
with AT_EMPTY_PATH in the flags argument.
It tries to avoid allocation in the last case; it's not always
able to do so, in which case the temporary struct filename instance
is freed and NULL returned anyway.
Fast path is inlined.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----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=B5R5
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.12-20241019' of git://git.kernel.dk/linux
Pull one more io_uring fix from Jens Axboe:
"Fix for a regression introduced in 6.12-rc2, where a condition check
was negated and hence -EAGAIN would bubble back up up to userspace
rather than trigger a retry condition"
* tag 'io_uring-6.12-20241019' of git://git.kernel.dk/linux:
io_uring/rw: fix wrong NOWAIT check in io_rw_init_file()
Add helpers to get atomic write limits for a bdev, so that we don't access
request_queue helpers outside the block layer.
We check if the bdev can actually atomic write in these helpers, so we
can avoid users missing using this check.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241019125113.369994-4-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently FMODE_CAN_ATOMIC_WRITE is set if the bdev can atomic write and
the file is open for direct IO. This does not work if the file is not
opened for direct IO, yet fcntl(O_DIRECT) is used on the fd later.
Change to check for direct IO on a per-IO basis in
generic_atomic_write_valid(). Since we want to report -EOPNOTSUPP for
non-direct IO for an atomic write, change to return an error code.
Relocate the block fops atomic write checks to the common write path, as to
catch non-direct IO.
Fixes: c34fc6f26a ("fs: Initial atomic write support")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241019125113.369994-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
