print_reg_state() should not consider adding reg->off to reg->var_off.value
when dumping scalars. Scalars can be produced with reg->off != 0 through
BPF_ADD_CONST, and thus as-is this can skew the register log dump.
Fixes: 98d7ca374b ("bpf: Track delta between "linked" registers.")
Reported-by: Nathaniel Theis <nathaniel.theis@nccgroup.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241016134913.32249-2-daniel@iogearbox.net
Nathaniel reported a bug in the linked scalar delta tracking, which can lead
to accepting a program with OOB access. The specific code is related to the
sync_linked_regs() function and the BPF_ADD_CONST flag, which signifies a
constant offset between two scalar registers tracked by the same register id.
The verifier attempts to track "similar" scalars in order to propagate bounds
information learned about one scalar to others. For instance, if r1 and r2
are known to contain the same value, then upon encountering 'if (r1 != 0x1234)
goto xyz', not only does it know that r1 is equal to 0x1234 on the path where
that conditional jump is not taken, it also knows that r2 is.
Additionally, with env->bpf_capable set, the verifier will track scalars
which should be a constant delta apart (if r1 is known to be one greater than
r2, then if r1 is known to be equal to 0x1234, r2 must be equal to 0x1233.)
The code path for the latter in adjust_reg_min_max_vals() is reached when
processing both 32 and 64-bit addition operations. While adjust_reg_min_max_vals()
knows whether dst_reg was produced by a 32 or a 64-bit addition (based on the
alu32 bool), the only information saved in dst_reg is the id of the source
register (reg->id, or'ed by BPF_ADD_CONST) and the value of the constant
offset (reg->off).
Later, the function sync_linked_regs() will attempt to use this information
to propagate bounds information from one register (known_reg) to others,
meaning, for all R in linked_regs, it copies known_reg range (and possibly
adjusting delta) into R for the case of R->id == known_reg->id.
For the delta adjustment, meaning, matching reg->id with BPF_ADD_CONST, the
verifier adjusts the register as reg = known_reg; reg += delta where delta
is computed as (s32)reg->off - (s32)known_reg->off and placed as a scalar
into a fake_reg to then simulate the addition of reg += fake_reg. This is
only correct, however, if the value in reg was created by a 64-bit addition.
When reg contains the result of a 32-bit addition operation, its upper 32
bits will always be zero. sync_linked_regs() on the other hand, may cause
the verifier to believe that the addition between fake_reg and reg overflows
into those upper bits. For example, if reg was generated by adding the
constant 1 to known_reg using a 32-bit alu operation, then reg->off is 1
and known_reg->off is 0. If known_reg is known to be the constant 0xFFFFFFFF,
sync_linked_regs() will tell the verifier that reg is equal to the constant
0x100000000. This is incorrect as the actual value of reg will be 0, as the
32-bit addition will wrap around.
Example:
0: (b7) r0 = 0; R0_w=0
1: (18) r1 = 0x80000001; R1_w=0x80000001
3: (37) r1 /= 1; R1_w=scalar()
4: (bf) r2 = r1; R1_w=scalar(id=1) R2_w=scalar(id=1)
5: (bf) r4 = r1; R1_w=scalar(id=1) R4_w=scalar(id=1)
6: (04) w2 += 2147483647; R2_w=scalar(id=1+2147483647,smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff))
7: (04) w4 += 0 ; R4_w=scalar(id=1+0,smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff))
8: (15) if r2 == 0x0 goto pc+1
10: R0=0 R1=0xffffffff80000001 R2=0x7fffffff R4=0xffffffff80000001 R10=fp0
What can be seen here is that r1 is copied to r2 and r4, such that {r1,r2,r4}.id
are all the same which later lets sync_linked_regs() to be invoked. Then, in
a next step constants are added with alu32 to r2 and r4, setting their ->off,
as well as id |= BPF_ADD_CONST. Next, the conditional will bind r2 and
propagate ranges to its linked registers. The verifier now believes the upper
32 bits of r4 are r4=0xffffffff80000001, while actually r4=r1=0x80000001.
One approach for a simple fix suitable also for stable is to limit the constant
delta tracking to only 64-bit alu addition. If necessary at some later point,
BPF_ADD_CONST could be split into BPF_ADD_CONST64 and BPF_ADD_CONST32 to avoid
mixing the two under the tradeoff to further complicate sync_linked_regs().
However, none of the added tests from dedf56d775 ("selftests/bpf: Add tests
for add_const") make this necessary at this point, meaning, BPF CI also passes
with just limiting tracking to 64-bit alu addition.
Fixes: 98d7ca374b ("bpf: Track delta between "linked" registers.")
Reported-by: Nathaniel Theis <nathaniel.theis@nccgroup.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20241016134913.32249-1-daniel@iogearbox.net
When checking MTE tags, we print some diagnostic messages when the tests
fail. Some variables uses there are "longs", however we only use "%x"
for the format specifier.
Update the format specifiers to "%lx", to match the variable types they
are supposed to print.
Fixes: f3b2a26ca7 ("kselftest/arm64: Verify mte tag inclusion via prctl")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240816153251.2833702-9-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When printing the value of a pointer, we should not use an integer
format specifier, but the dedicated "%p" instead.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240816153251.2833702-8-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When printing the signal context's PC, we use a "%lx" format specifier,
which matches the common userland (glibc's) definition of uint64_t as an
"unsigned long". However the structure in question is defined in a
kernel uapi header, which uses a self defined __u64 type, and the arm64
kernel headers define this using "int-ll64.h", so it becomes an
"unsigned long long". This mismatch leads to the usual compiler warning.
The common fix would be to use "PRIx64", but because this is defined by
the userland's toolchain libc headers, it wouldn't match as well. Since
we know the exact type of __u64, just use "%llx" here instead, to silence
this warning.
This also fixes a more severe typo: "$lx" is not a valid format
specifier.
Fixes: 191e678bdc ("kselftest/arm64: Log unexpected asynchronous MTE faults")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240816153251.2833702-7-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Using pointers for the format specifier strings in printf-style
functions can create potential security problems, as the number of
arguments to be parsed could vary from call to call. Most compilers
consequently warn about those:
"format not a string literal and no format arguments [-Wformat-security]"
If we only want to print a constant string, we can just use a fixed "%s"
format instead, and pass the string as an argument.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240816153251.2833702-5-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Previously test_task_tid was setting `linfo.task.tid`
to `getpid()` which is the same as `gettid()` for the
parent process. Instead create a new child thread
and set `linfo.task.tid` to `gettid()` to make sure
the tid filtering logic is working as expected.
Signed-off-by: Jordan Rome <linux@jordanrome.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241016210048.1213935-2-linux@jordanrome.com
In userspace, you can add a tid filter by setting
the "task.tid" field for "bpf_iter_link_info".
However, `get_pid_task` when called for the
`BPF_TASK_ITER_TID` type should have been using
`PIDTYPE_PID` (tid) instead of `PIDTYPE_TGID` (pid).
Fixes: f0d74c4da1 ("bpf: Parameterize task iterators.")
Signed-off-by: Jordan Rome <linux@jordanrome.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241016210048.1213935-1-linux@jordanrome.com
If MTE is not available on a system, we detect this early and skip all
the MTE selftests. However this happens before we print the TAP plan, so
tools parsing the TAP output get confused and report an error.
Use the existing ksft_exit_skip() function to handle this, which uses a
dummy plan to work with tools expecting proper TAP syntax, as described
in the TAP specification.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240816153251.2833702-4-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The F8DP2 DPISA extension has a separate cpuinfo field, named
accordingly.
Change the erroneously placed name of "f8dp4" to "f8dp2".
Fixes: 44d10c27bd ("kselftest/arm64: Add 2023 DPISA hwcap test coverage")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240816153251.2833702-3-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The definition of GNU_SOURCE was recently centralised in an upper layer
kselftest Makefile, so the definition in the arm64 signal tests Makefile
is no longer needed. To make things worse, since both definitions are
not strictly identical, the compiler warns about it:
<command-line>: warning: "_GNU_SOURCE" redefined
<command-line>: note: this is the location of the previous definition
Drop the definition in the arm64/signal Makefile.
Fixes: cc937dad85 ("selftests: centralize -D_GNU_SOURCE= to CFLAGS in lib.mk")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240816153251.2833702-2-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Empty file unintentionally included in commit. Drop it.
Fixes: 94aab7a0f5 ("iio: adc: ad7606: rework available attributes for SW channels")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the new machine_check() callback to select an alternate topology
for RT712-VB devices.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016102333.294448-12-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a filter to skip the RT172 VB configuration if a SmartMic Function
is not found in the SDCA descriptors.
If the ACPI information is incorrect this can only be quirked further
with DMI information.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016102333.294448-11-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In theory the dailinks are created based on the number of endpoints
reported in ACPI match tables, so it should harmless to add a new
dailink: RT713 VA would not use it since it has only 2 endpoints.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016102333.294448-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In theory the dailinks are created based on the number of endpoints
reported in ACPI match tables, so it should harmless to add a new
dailink: RT712 VA would not use it since it has only 2 endpoints.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016102333.294448-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing machine_quirk() returns a pointer to a soc_acpi_mach
structure.
For SoundWire/SDCA support, we need a slightly different
functionality where a quirk function either validates or NACKs an
initial selection, based on additional firmware/DMI information.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016102333.294448-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We shouldn't do any devm_ based allocation in the io_init(), this need
to happen in the probe(). Luckily, we now have an SDCA helper to look
in ACPI tables if a SMART_MIC function is exposed.
FIXME: the registers are not well handled today, the regmap lists
registers which are not really supported in all platforms. The regmap
needs to throw an error if those registers are accessed without
existing.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016102333.294448-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a generic match function for quirks, chances are we are going to
have lots of those...
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016102333.294448-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use SDCA helpers to get the basic information and store it in the
slave context. The information will be optionally be used in codec
drivers to register sub-devices for each Function.
When platforms are not based on ACPI the helpers do absolutely
nothing.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://patch.msgid.link/20241016102333.294448-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new module for SDCA (SoundWire Device Class for Audio) support.
For now just add a parser to identify the SDCA revision and the
function mask.
Note that the SDCA definitions and related MIPI DisCo properties are
defined only for ACPI platforms and extracted with _DSD helpers. There
is currently no support for Device Tree in the specification, the
'depends on ACPI' reflects this design limitation. This might change
in a future revision of the specification but for SDCA 1.0 ACPI is the
only supported type of platform firmware.
The SDCA library is defined with static inline fallbacks, which will
allow for unconditional addition of SDCA support in common parts of
the code.
The design follows a four-step process:
1) Basic information related to Functions is extracted from MIPI DisCo
tables and stored in the 'struct sdw_slave'. Devm_ based memory
allocation is not allowed at this point prior to a driver probe, so we only
store the function node, address and type.
2) When a codec driver probes, it will register subdevices for each
Function identified in phase 1)
3) a driver will probe for each subdevice and addition parsing/memory
allocation takes place at this level. devm_ based allocation is highly
encouraged to make error handling manageable.
4) Before the peripheral device becomes physically attached, register
access is not permitted and the regmaps are cache-only. When
peripheral device is enumerated, the bus level uses the
'update_status' notification; after optional device-level
initialization, the codec driver will notify each of the subdevices so
that they can start interacting with the hardware.
Note that the context extracted in 1) should be arguably be handled
completely in the codec driver probe. That would however make it
difficult to use the ACPI information for machine quirks, and
e.g. select different machine driver and topologies as done for the
RT712_VB handling later in the series. To make the implementation of
quirks simpler, this patchset extracts a minimal amount of context
(interface revision and number/type of Functions) before the codec
driver probe, and stores this context in the scope of the 'struct
sdw_slave'.
The SDCA library can also be used in a vendor-specific driver without
creating subdevices, e.g. to retrieve the 'initialization-table'
values to write platform-specific values as needed.
For more technical details, the SDCA specification is available for
public downloads at https://www.mipi.org/mipi-sdca-v1-0-download
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016102333.294448-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This structure is used to copy information from the 'sdw_slave'
structures, it's better to create a flexible array of 'sdw_slave'
pointers and directly access the information. This will also help
access additional information stored in the 'sdw_slave' structure,
such as an SDCA context.
This patch does not add new functionality, it only modified how the
information is retrieved.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016102333.294448-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For the acpi_handle stuff.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://patch.msgid.link/20241016102333.294448-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have filled all 64 bits of AT_HWCAP2 so in order to support discovery of
further features provide the framework to use the already defined AT_HWCAP3
for further CPU features.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20241004-arm64-elf-hwcap3-v2-2-799d1daad8b0@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
AT_HWCAP3 and AT_HWCAP4 were recently defined for use on PowerPC in commit
3281366a8e ("uapi/auxvec: Define AT_HWCAP3 and AT_HWCAP4 aux vector,
entries"). Since we want to start using AT_HWCAP3 on arm64 add support for
exposing both these new hwcaps via binfmt_elf.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Kees Cook <kees@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20241004-arm64-elf-hwcap3-v2-1-799d1daad8b0@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
No big change at this point. Regular development and fixes are listed:
rtl8xxxu:
- correct beaconing for the case of STA + AP
rtw88:
- consolidate parser of RX descriptor as preparation to support coming
chips
rtw89:
- update BT-coexistence to improve user experience for RTL8852BE and
RTL8852BE-VT
- correct RTL8922AE RF calibration timeout time and print out firmware
log
- set proper PCI EQ value for RTL8852CE and RTL8922AE
- adjust to support MLO continuously
-----BEGIN PGP SIGNATURE-----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=qbTP
-----END PGP SIGNATURE-----
Merge tag 'rtw-next-2024-10-10' of https://github.com/pkshih/rtw
rtw-next patches for v6.13
No big change at this point. Regular development and fixes are listed:
rtl8xxxu:
- correct beaconing for the case of STA + AP
rtw88:
- consolidate parser of RX descriptor as preparation to support coming
chips
rtw89:
- update BT-coexistence to improve user experience for RTL8852BE and
RTL8852BE-VT
- correct RTL8922AE RF calibration timeout time and print out firmware
log
- set proper PCI EQ value for RTL8852CE and RTL8922AE
- adjust to support MLO continuously
When arm64's stack unwinder encounters an exception boundary, it uses
the pt_regs::stackframe created by the entry code, which has a copy of
the PC and FP at the time the exception was taken. The unwinder doesn't
know anything about pt_regs, and reports the PC from the stackframe, but
does not report the LR.
The LR is only guaranteed to contain the return address at function call
boundaries, and can be used as a scratch register at other times, so the
LR at an exception boundary may or may not be a legitimate return
address. It would be useful to report the LR value regardless, as it can
be helpful when debugging, and in future it will be helpful for reliable
stacktrace support.
This patch changes the way we unwind across exception boundaries,
allowing both the PC and LR to be reported. The entry code creates a
frame_record_meta structure embedded within pt_regs, which the unwinder
uses to find the pt_regs. The unwinder can then extract pt_regs::pc and
pt_regs::lr as two separate unwind steps before continuing with a
regular walk of frame records.
When a PC is unwound from pt_regs::lr, dump_backtrace() will log this
with an "L" marker so that it can be identified easily. For example,
an unwind across an exception boundary will appear as follows:
| el1h_64_irq+0x6c/0x70
| _raw_spin_unlock_irqrestore+0x10/0x60 (P)
| __aarch64_insn_write+0x6c/0x90 (L)
| aarch64_insn_patch_text_nosync+0x28/0x80
... with a (P) entry for pt_regs::pc, and an (L) entry for pt_regs:lr.
Note that the LR may be stale at the point of the exception, for example,
shortly after a return:
| el1h_64_irq+0x6c/0x70
| default_idle_call+0x34/0x180 (P)
| default_idle_call+0x28/0x180 (L)
| do_idle+0x204/0x268
... where the LR points a few instructions before the current PC.
This plays nicely with all the other unwind metadata tracking. With the
ftrace_graph profiler enabled globally, and kretprobes installed on
generic_handle_domain_irq() and do_interrupt_handler(), a backtrace triggered
by magic-sysrq + L reports:
| Call trace:
| show_stack+0x20/0x40 (CF)
| dump_stack_lvl+0x60/0x80 (F)
| dump_stack+0x18/0x28
| nmi_cpu_backtrace+0xfc/0x140
| nmi_trigger_cpumask_backtrace+0x1c8/0x200
| arch_trigger_cpumask_backtrace+0x20/0x40
| sysrq_handle_showallcpus+0x24/0x38 (F)
| __handle_sysrq+0xa8/0x1b0 (F)
| handle_sysrq+0x38/0x50 (F)
| pl011_int+0x460/0x5a8 (F)
| __handle_irq_event_percpu+0x60/0x220 (F)
| handle_irq_event+0x54/0xc0 (F)
| handle_fasteoi_irq+0xa8/0x1d0 (F)
| generic_handle_domain_irq+0x34/0x58 (F)
| gic_handle_irq+0x54/0x140 (FK)
| call_on_irq_stack+0x24/0x58 (F)
| do_interrupt_handler+0x88/0xa0
| el1_interrupt+0x34/0x68 (FK)
| el1h_64_irq_handler+0x18/0x28
| el1h_64_irq+0x6c/0x70
| default_idle_call+0x34/0x180 (P)
| default_idle_call+0x28/0x180 (L)
| do_idle+0x204/0x268
| cpu_startup_entry+0x3c/0x50 (F)
| rest_init+0xe4/0xf0
| start_kernel+0x744/0x750
| __primary_switched+0x88/0x98
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-11-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When unwinding stacks, we use unwind_consume_stack() to both find
whether an object (e.g. a frame record) is on an accessible stack *and*
to update the stack boundaries. This works fine today since we only care
about one type of object which does not overlap other objects.
In subsequent patches we'll want to check whether an object (e.g a frame
record) is on the stack and follow this up by accessing a larger object
containing the first (e.g. a pt_regs with an embedded frame record).
To make that pattern easier to implement, this patch reworks
unwind_find_next_stack() and unwind_consume_stack() so that the former
can be used to check if an object is on any accessible stack, and the
latter is purely used to update the stack boundaries.
As unwind_find_next_stack() is modified to also check the stack
currently being unwound, it is renamed to unwind_find_stack().
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-10-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When analysing a stacktrace it can be useful to know whether an unwound
PC has been rewritten by fgraph or kretprobes, as in some situations
these may be suspect or be known to be unreliable.
This patch adds flags to track when an unwind entry has recovered the PC
from fgraph and/or kretprobes, and updates dump_backtrace() to log when
this is the case.
The flags recorded are:
"F" - the PC was recovered from fgraph
"K" - the PC was recovered from kretprobes
These flags are recorded and logged in addition to the original source
of the unwound PC.
For example, with the ftrace_graph profiler enabled globally, and
kretprobes installed on generic_handle_domain_irq() and
do_interrupt_handler(), a backtrace triggered by magic-sysrq + L
reports:
| Call trace:
| show_stack+0x20/0x40 (CF)
| dump_stack_lvl+0x60/0x80 (F)
| dump_stack+0x18/0x28
| nmi_cpu_backtrace+0xfc/0x140
| nmi_trigger_cpumask_backtrace+0x1c8/0x200
| arch_trigger_cpumask_backtrace+0x20/0x40
| sysrq_handle_showallcpus+0x24/0x38 (F)
| __handle_sysrq+0xa8/0x1b0 (F)
| handle_sysrq+0x38/0x50 (F)
| pl011_int+0x460/0x5a8 (F)
| __handle_irq_event_percpu+0x60/0x220 (F)
| handle_irq_event+0x54/0xc0 (F)
| handle_fasteoi_irq+0xa8/0x1d0 (F)
| generic_handle_domain_irq+0x34/0x58 (F)
| gic_handle_irq+0x54/0x140 (FK)
| call_on_irq_stack+0x24/0x58 (F)
| do_interrupt_handler+0x88/0xa0
| el1_interrupt+0x34/0x68 (FK)
| el1h_64_irq_handler+0x18/0x28
| el1h_64_irq+0x64/0x68
| default_idle_call+0x34/0x180
| do_idle+0x204/0x268
| cpu_startup_entry+0x40/0x50 (F)
| rest_init+0xe4/0xf0
| start_kernel+0x744/0x750
| __primary_switched+0x80/0x90
Note that as these flags are reported next to the recovered PC value,
they appear on the callers of instrumented functions. For example
gic_handle_irq() has a "K" marker because generic_handle_domain_irq()
was instrumented with kretprobes and had its return address rewritten.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-9-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When analysing a stacktrace it can be useful to know where an unwound PC
came from, as in some situations certain sources may be suspect or known
to be unreliable. In future it would also be useful to track this so
that certain unwind steps can be performed in a stateful manner. For
example when unwinding across an exception boundary, we'd ideally unwind
pt_regs::pc, then pt_regs::lr, then the next frame record.
This patch adds an enumerated set of unwind sources, tracks this during
the unwind, and updates dump_backtrace() to log these for interesting
unwind steps.
The interesting sources recorded are:
"C" - the PC came from the caller of an unwind function.
"T" - the PC came from thread_saved_pc() for a blocked task.
"P" - the PC came from a pt_regs::pc.
"U" - the PC came from an unknown source (indicates an unwinder error).
... with nothing recorded when the PC came from a frame_record::pc as
this is the vastly common case and logging this would make it difficult
to spot the more interesting cases.
For example, when triggering a backtrace via magic-sysrq + L, the CPU
handling the sysrq will have a backtrace whose first element is the
caller (C) of dump_backtrace():
| Call trace:
| show_stack+0x18/0x30 (C)
| dump_stack_lvl+0x60/0x80
| dump_stack+0x18/0x24
| nmi_cpu_backtrace+0xfc/0x140
| ...
... and other CPUs will have a backtrace whose first element is their
pt_regs::pc (P) at the instant the backtrace IPI was taken:
| Call trace:
| _raw_spin_unlock_irqrestore+0x8/0x50 (P)
| wake_up_process+0x18/0x24
| process_timeout+0x14/0x20
| call_timer_fn.isra.0+0x24/0x80
| ...
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-8-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently dump_backtrace() can only print the PC value at each step of
the unwind, as this is all the information that arch_stack_walk()
passes to the dump_backtrace_entry() callback.
In future we'd like to print some additional information, such as the
origin of entries (e.g. PC, LR, FP) and/or the reliability thereof.
In preparation for doing so, this patch moves dump_backtrace() over to
kunwind_stack_walk(), which passes the full kunwind_state to the
callback.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-7-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently the signal handling code has its own struct frame_record,
the definition of struct pt_regs open-codes a frame record as an array,
and the kernel unwinder hard-codes frame record offsets.
Move to a common struct frame_record that can be used throughout the
kernel.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In subsequent patches we'll want to add an additional u64 to struct
pt_regs. To make space, this patch swaps the 'unused' and 'pmr' fields,
as the 'pmr' value only requires bits[7:0] and can safely fit into a
u32, which frees up a 64-bit unused field.
The 'lockdep_hardirqs' and 'exit_rcu' fields should eventually be moved
out of pt_regs and managed locally within entry-common.c, so I've left
those as-is for the moment.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The pt_regs::pmr_save field is weirdly named relative to all other
pt_regs fields, with a '_save' suffix that doesn't make anything clearer
and only leads to more typing to access the field.
Remove the '_save' suffix.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
For historical reasons the layout of struct pt_regs depends on the
configured endianness, with the order of the 'syscallno' and 'unused2'
fields varying dependent upon whether __AARCH64EB__ is defined. We no
longer depend on the order of these two fields and can remove the
ifdeffery.
The current conditional layout was introduced in commit:
35d0e6fb4d ("arm64: syscallno is secretly an int, make it official")
At the time, this was necessary so that the entry assembly could use a
single STP instruction to save the pt_regs::{orig_x0,syscallno} fields,
without logic that was conditional on the endianness of the kernel:
| el0_svc_naked:
| stp x0, xscno, [sp, #S_ORIG_X0] // save the original x0 and syscall number
This logic was converted to C in commit:
f37099b699 ("arm64: convert syscall trace logic to C")
Since that commit, we no longer manipulate pt_regs::orig_x0 from
assembly, and only manipulate pt_regs::syscallno as a 32-bit quantity
early in the kernel_entry assembly:
| /* Not in a syscall by default (el0_svc overwrites for real syscall) */
| .if \el == 0
| mov w21, #NO_SYSCALL
| str w21, [sp, #S_SYSCALLNO]
| .endif
Given the above, there's no longer a need for the layout of
pt_regs::{syscallno,unused2} to depend on the endianness of the kernel.
This patch removes the ifdeffery and places 'syscallno' before 'unused2'
regardless of the endianess of the kernel. At the same time, 'unused2'
is renamed to 'unused', as it is the only unused field within pt_regs.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
To ensure that the stack is correctly aligned when branching to C code,
we require that struct pt_regs is a multiple of 16 bytes, as noted in a
comment.
Add an explicit assertion for this, so that any accidental violation of
this requirement will be caught by the compiler.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
During the rework of the dso structure in patch ee756ef749 an
increment was forgotten for the symtab_type in case the data for
the kernel module are compressed. This affects the probing of the
kernel modules, which fails if the data are not already cached.
Increment the value of the symtab_type to its compressed variant so the
data could be recovered successfully.
Fixes: ee756ef749 ("perf dso: Add reference count checking and accessor functions")
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Acked-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Link: https://lore.kernel.org/r/20241010144836.16424-1-vmolnaro@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
If a symbol name is longer than the maximum event length (64 bytes), the
perf tool reports error:
# perf probe -x test_cpp_mangle --add "this_is_a_very_very_long_print_data_abcdefghijklmnopqrstuvwxyz(int)"
snprintf() failed: -7; the event name nbase='this_is_a_very_very_long_print_data_abcdefghijklmnopqrstuvwxyz(int)' is too long
Error: Failed to add events.
An information is missed in the log that the symbol name and the event
name can be set separately. Especially, this is recommended for adding
probe for a long symbol.
This commit refines the log for reminding event syntax.
After:
# perf probe -x test_cpp_mangle --add "this_is_a_very_very_long_print_data_abcdefghijklmnopqrstuvwxyz(int)"
snprintf() failed: -7; the event name 'this_is_a_very_very_long_print_data_abcdefghijklmnopqrstuvwxyz(int)' is too long
Hint: Set a shorter event with syntax "EVENT=PROBEDEF"
EVENT: Event name (max length: 64 bytes).
Error: Failed to add events.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20241012204725.928794-4-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In the kernel, the probe group string length is limited up to
MAX_EVENT_NAME_LEN (including the NULL terminator).
Check for this limitation and report an error if it is exceeded.
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20241012204725.928794-3-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The MAX_EVENT_NAME_LEN macro has been defined in the kernel. Use the
same definition in the tool for more readable.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20241012204725.928794-2-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
On my system, perf list is very slow to print the whole events. I think
there's a performance issue in SDT and uprobes event listing. I noticed
this issue while running perf test on x86 but it takes long to check
some CoreSight event which should be skipped quickly.
Anyway, some test uses perf list to check whether the required event is
available before running the test. The perf list command can take an
argument to specify event class or (glob) pattern. But glob pattern is
only to suppress output for unmatched ones after checking all events.
In this case, specifying event class is better to reduce the number of
events it checks and to avoid buggy subsystems entirely.
No functional changes intended.
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20241016065654.269994-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
nvme_dev_disable() modifies the dev->online_queues field, therefore
nvme_pci_update_nr_queues() should avoid racing against it, otherwise
we could end up passing invalid values to blk_mq_update_nr_hw_queues().
WARNING: CPU: 39 PID: 61303 at drivers/pci/msi/api.c:347
pci_irq_get_affinity+0x187/0x210
Workqueue: nvme-reset-wq nvme_reset_work [nvme]
RIP: 0010:pci_irq_get_affinity+0x187/0x210
Call Trace:
<TASK>
? blk_mq_pci_map_queues+0x87/0x3c0
? pci_irq_get_affinity+0x187/0x210
blk_mq_pci_map_queues+0x87/0x3c0
nvme_pci_map_queues+0x189/0x460 [nvme]
blk_mq_update_nr_hw_queues+0x2a/0x40
nvme_reset_work+0x1be/0x2a0 [nvme]
Fix the bug by locking the shutdown_lock mutex before using
dev->online_queues. Give up if nvme_dev_disable() is running or if
it has been executed already.
Fixes: 949928c1c7 ("NVMe: Fix possible queue use after freed")
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Depending on x86 and KVM is not enough, as the kvm helper functions
that get called here are controlled by CONFIG_KVM_X86, which is
disabled if both KVM_INTEL and KVM_AMD are turned off.
ERROR: modpost: "kvm_write_track_remove_gfn" [drivers/gpu/drm/i915/kvmgt.ko] undefined!
ERROR: modpost: "kvm_page_track_register_notifier" [drivers/gpu/drm/i915/kvmgt.ko] undefined!
ERROR: modpost: "kvm_page_track_unregister_notifier" [drivers/gpu/drm/i915/kvmgt.ko] undefined!
ERROR: modpost: "kvm_write_track_add_gfn" [drivers/gpu/drm/i915/kvmgt.ko] undefined!
Change the dependency to CONFIG_KVM_X86 instead.
Fixes: ea4290d77b ("KVM: x86: leave kvm.ko out of the build if no vendor module is requested")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015152157.2955229-1-arnd@kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
- Disable software tag-based KASAN when compiling with GCC, as functions
are incorrectly instrumented leading to a crash early during boot.
- Fix pkey configuration for kernel threads when POE is enabled.
- Fix invalid memory accesses in uprobes when targetting load-literal
instructions.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmcPrzQQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNIr6B/wN+o1xI7Fv/QdlaTuKYLvOOg/XTl6sbUDj
YssxtjhpKuaFVG4zJHNsWvgUqO+YCM7m3F1L8LVPMF7l2xoKtRTIB1Ye315hTjYm
dW5Te6xBMVKF8SVxE8sBbZobdokIW1JNPBrvGvHO3d5ujmofzwHU8RNMXuTUItRw
z85Qy75FkEDTEbsWhS3VL5HOgEr+k0TYDRa8SXwKWVj7/rYna3tO39kIdS5dt9VX
wDJbnxtWJMhiHmDnevFFhBkSZrips12P1Rb6HUSmhpUJh0Rk4TAZntSl2f/lr+jA
PuboBbSG68UOCwAHoNmTcLdFhkiNaiyw4w2F7hk2A6aNRtme+bT0
=M/ug
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Disable software tag-based KASAN when compiling with GCC, as
functions are incorrectly instrumented leading to a crash early
during boot
- Fix pkey configuration for kernel threads when POE is enabled
- Fix invalid memory accesses in uprobes when targetting load-literal
instructions
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
kasan: Disable Software Tag-Based KASAN with GCC
Documentation/protection-keys: add AArch64 to documentation
arm64: set POR_EL0 for kernel threads
arm64: probes: Fix uprobes for big-endian kernels
arm64: probes: Fix simulate_ldr*_literal()
arm64: probes: Remove broken LDR (literal) uprobe support
cw1200_queue_requeue_all() has been unused since it was added in 2013 by commit
a910e4a94f ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241012203852.229151-1-linux@treblig.org
Replace one-element array with a flexible-array member in `struct
mwifiex_ie_types_wildcard_ssid_params` to fix the following warning
on a MT8173 Chromebook (mt8173-elm-hana):
[ 356.775250] ------------[ cut here ]------------
[ 356.784543] memcpy: detected field-spanning write (size 6) of single field "wildcard_ssid_tlv->ssid" at drivers/net/wireless/marvell/mwifiex/scan.c:904 (size 1)
[ 356.813403] WARNING: CPU: 3 PID: 742 at drivers/net/wireless/marvell/mwifiex/scan.c:904 mwifiex_scan_networks+0x4fc/0xf28 [mwifiex]
The "(size 6)" above is exactly the length of the SSID of the network
this device was connected to. The source of the warning looks like:
ssid_len = user_scan_in->ssid_list[i].ssid_len;
[...]
memcpy(wildcard_ssid_tlv->ssid,
user_scan_in->ssid_list[i].ssid, ssid_len);
There is a #define WILDCARD_SSID_TLV_MAX_SIZE that uses sizeof() on this
struct, but it already didn't account for the size of the one-element
array, so it doesn't need to be changed.
Fixes: 5e6e3a92b9 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241007222301.24154-1-alpernebiyasak@gmail.com
brcms_debugfs_get_devdir() has been unused since it was added by commit
8e21df2389 ("brcmsmac: hardware info in debugfs")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241004004259.470853-1-linux@treblig.org
