For TJA11xx PHYs, they have the capability to output 50MHz reference
clock on REF_CLK pin in RMII mode, which is called "revRMII" mode in
the PHY data sheet.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Per the RMII specification, the REF_CLK is sourced from MAC to PHY
or from an external source. But for TJA11xx PHYs, they support to
output a 50MHz RMII reference clock on REF_CLK pin. Previously the
"nxp,rmii-refclk-in" was added to indicate that in RMII mode, if
this property present, REF_CLK is input to the PHY, otherwise it
is output. This seems inappropriate now. Because according to the
RMII specification, the REF_CLK is originally input, so there is
no need to add an additional "nxp,rmii-refclk-in" property to
declare that REF_CLK is input.
Unfortunately, because the "nxp,rmii-refclk-in" property has been
added for a while, and we cannot confirm which DTS use the TJA1100
and TJA1101 PHYs, changing it to switch polarity will cause an ABI
break. But fortunately, this property is only valid for TJA1100 and
TJA1101. For TJA1103/TJA1104/TJA1120/TJA1121 PHYs, this property is
invalid because they use the nxp-c45-tja11xx driver, which is a
different driver from TJA1100/TJA1101. Therefore, for PHYs using
nxp-c45-tja11xx driver, add "nxp,rmii-refclk-out" property to
support outputting RMII reference clock on REF_CLK pin.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The last callsite of iommu_present() is removed by commit <45c690aea8>
("drm/tegra: Use iommu_paging_domain_alloc()"). Remove it to avoid dead
code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241009051808.29455-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use atomic64_inc_return(&ref) instead of atomic64_add_return(1, &ref)
to use optimized implementation and ease register pressure around
the primitive for targets that implement optimized variant.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241007084356.47799-1-ubizjak@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reorganize kerneldoc parameter names to match the parameter
order in the function header.
Problems identified using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20240930112121.95324-20-Julia.Lawall@inria.fr
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This fixes a crash when surprise hot-unplugging a PCI device. This crash
happens because during hot-unplug __iommu_group_set_domain_nofail()
attaching the default domain fails when the platform no longer
recognizes the device as it has already been removed and we end up with
a NULL domain pointer and UAF. This is exactly the case referred to in
the second comment in __iommu_device_set_domain() and just as stated
there if we can instead attach the blocking domain the UAF is prevented
as this can handle the already removed device. Implement the blocking
domain to use this handling. With this change, the crash is fixed but
we still hit a warning attempting to change DMA ownership on a blocked
device.
Fixes: c76c067e48 ("s390/pci: Use dma-iommu layer")
Co-developed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240910211516.137933-1-mjrosato@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- Clarify warning message when failing to disable the MMU-500 prefetcher
- Fix undefined behaviour in calculation of L1 stream-table index when
32-bit StreamIDs are implemented
- Replace a rogue comma with a semicolon
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmcGZiAQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNFzpB/45ANAP3CW6UhJU6hRTH2trlcXtqVOp7Yvb
0zh6HnYiBXP5qncg1FZhbl5xiWKYdcu1zoY3MFggAh1P19Q6wWeZEEo0/NIluvvW
QCHkgyfllgEYZcUKVqRJwClp4bKqvldHiYYUKQQ5L3BGutx7kDrM8i68gpuNBBC+
D6u4eTmjlHPp+3ltD66vGhDLIEVszwewUUc+W/R//1eVHpTyD0hkX3jYg3c+8r5N
pyyIqznishu8Sz4Ddqkl+JRELkzB6JE1Gdyzm30y43mnTy0HdRrS1lkERqVa1RBp
eYi8QqYkcaZwXrXd0Q9c8ZMytSN7KYqncVBH3v688+wRALA70fpC
=n91J
-----END PGP SIGNATURE-----
Merge tag 'arm-smmu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into fixes
Arm SMMU fixes for 6.12
- Clarify warning message when failing to disable the MMU-500 prefetcher
- Fix undefined behaviour in calculation of L1 stream-table index when
32-bit StreamIDs are implemented
- Replace a rogue comma with a semicolon
Add following peripherals support for the Emtop i.MX8M Mini Baseboard
* Wi-Fi
* Audio
* SD card
* RTC
* CAN bus
* USB OTG
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This driver is no longer used on any platform. It has been replaced by
tilcdc on the two DaVinci boards we still support and can be removed.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
'struct sbus_mmap_map' are not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increases overall security.
Update sbusfb_mmap_helper() accordingly.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
2452 536 16 3004 bbc drivers/video/fbdev/bw2.o
After:
=====
text data bss dec hex filename
2500 483 16 2999 bb7 drivers/video/fbdev/bw2.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
Fix the indentation to ensure consistent code style and improve
readability, and to fix this warning:
drivers/video/fbdev/nvidia/nv_hw.c:1512 NVLoadStateExt() warn:
inconsistent indenting
Signed-off-by: SurajSonawane2415 <surajsonawane0215@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The sstfb driver currently depends on CONFIG_FB_DEVICE to create sysfs
entries and access info->dev. This patch wraps the relevant code blocks
with #ifdef CONFIG_FB_DEVICE, allowing the driver to be built and used
even if CONFIG_FB_DEVICE is not selected.
The sysfs setting only controls the VGA pass-through state and is not
required for the display to work correctly.
(See: http://vogonswiki.com/index.php/VGA_passthrough_cable
for more information.)
Added some fixes from Thomas Zimmermann.
Signed-off-by: Gonzalo Silvalde Blanco <gonzalo.silvalde@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Add USB4 HOST to Apalis-iMX8QM SOM and its carrier boards.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for audio-codec NAU88C22 present on the Apalis Evaluation
Board v1.2 carrier board.
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add audio support to Apalis-iMX8QM and its carrier boards. These includes:
* On SOM i2s sound card
* On SOM spdif sound card
* Enabling Audiomix and Asynchronous Sample Rate Converter
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Set critical/alert thermal thresholds for all relevant SOC
temperature trips to the IT value (max T_junction 105 degree
Celsius) in accordance with the IT grade of the SOM.
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is no adma pwm on iMX8QM, so remove it from the DT. When enabled,
this cause warnings on resource partition ownership check by U-Boot
that receives messages from SCU firmware saying that these resources are
not owned:
Booting using the fdt blob at 0x9d400000
Loading Device Tree to 00000000fd622000, end 00000000fd66efff ... OK
Disable pwm@5a190000 rsrc 188 not owned
Disable clock-controller@5a590000 rsrc 188 not owned
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This option makes legacy Netfilter Kconfig user selectable, giving users
the option to configure iptables without enabling any other config.
Make the following KConfig entries user selectable:
* BRIDGE_NF_EBTABLES_LEGACY
* IP_NF_ARPTABLES
* IP_NF_IPTABLES_LEGACY
* IP6_NF_IPTABLES_LEGACY
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently workaround is not applied when vblank is enabled on crtc that
needs the workaround if vblank is already enabled for another crtc that
doesn't need the workaround. Fix this by increasing counter only if crtc
needs the workaround.
Fixes: aa451abcff ("drm/i915/display: Prevent DC6 while vblank is enabled for Panel Replay")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009134225.1322820-2-jouni.hogander@intel.com
We are about to change meaning of vblank_enabled to fix Panel Replay vblank
workaround. For sake of clarity we need to rename it. Vblank_enabled is
used for i915gm/i945gm vblank irq workaround as well -> instead of rename
add new counter named as vblank_wa_pipes.
v2:
- s/vblank_wa_pipes/vblank_wa_num_pipes/
- use int as a type for the counter
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009134225.1322820-1-jouni.hogander@intel.com
The DisCo for SoundWire 2.0 spec adds support for a new
sdw-manager-list property. Add it in backwards-compatible mode with
'sdw-master-count', which assumed that all links between 0..count-1
exist.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241001070611.63288-5-yung-chuan.liao@linux.intel.com
For some reason we used an array of one u8 when the specification
requires a u32.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241001070611.63288-4-yung-chuan.liao@linux.intel.com
Optimize a bit by using an intermediate 'fwnode' variable.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241001070611.63288-3-yung-chuan.liao@linux.intel.com
dvb_vb2_expbuf() didn't check if the given buffer index was
for a valid buffer. Add this check.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Chenyuan Yang <chenyuan0y@gmail.com>
Closes: https://lore.kernel.org/linux-media/?q=WARNING+in+vb2_core_reqbufs
Fixes: 7dc866df40 ("media: dvb-core: Use vb2_get_buffer() instead of directly access to buffers array")
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit b3e992f69c ("hwmon: (jc42) Strengthen detect function")
attempted to make the detect function more robust for
TSE2004-compliant devices by checking capability bits which, according
to the JEDEC 21-C specification, should always be set. Unfortunately,
not all real-world implementations fully adhere to this specification,
so this change caused a regression.
Stop testing bit 7 (EVSD) of the Capabilities register, as it was
found to be 0 on one real-world device.
Also stop testing bits 0 (EVENT) and 2 (RANGE) as vendor datasheets
(Renesas TSE2004GB2B0, ST STTS2004) suggest that they may not always
be set either.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Message-ID: <20241014141204.026f4641@endymion.delvare>
Fixes: b3e992f69c ("hwmon: (jc42) Strengthen detect function")
Message-ID: <20241014220426.0c8f4d9c@endymion.delvare>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The new "kmem_cache" iterator will traverse the list of slab caches
and call attached BPF programs for each entry. It should check the
argument (ctx.s) if it's NULL before using it.
Now the iteration grabs the slab_mutex only if it traverse the list and
releases the mutex when it runs the BPF program. The kmem_cache entry
is protected by a refcount during the execution.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz> #slab
Link: https://lore.kernel.org/r/20241010232505.1339892-2-namhyung@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When compiling the cgroup selftests with the following command:
make -C tools/testing/selftests/cgroup/
the compiler complains as below:
test_cpu.c: In function ‘test_cpucg_nice’:
test_cpu.c:284:39: error: incompatible type for argument 2 of ‘hog_cpus_timed’
284 | hog_cpus_timed(cpucg, param);
| ^~~~~
| |
| struct cpu_hog_func_param
test_cpu.c:132:53: note: expected ‘void *’ but argument is of type ‘struct cpu_hog_func_param’
132 | static int hog_cpus_timed(const char *cgroup, void *arg)
| ~~~~~~^~~
Fix it by passing the address of param to hog_cpus_timed().
Fixes: 2e82c0d456 ("cgroup/rstat: Selftests for niced CPU statistics")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Commit 1fd9e4f257 ("selftests: make kselftest-clean remove libynl outputs")
added EXTRA_CLEAN of YNL generated files to ynl.mk. We already had
a EXTRA_CLEAN in the file including the snippet. Consolidate them.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241011230311.2529760-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Try to rebuild YNL if either user added a new family or the specs
of the families have changed. Stanislav's ncdevmem cause a false
positive build failure in NIPA because libynl.a isn't rebuilt
after ethtool is added to YNL_GENS.
Note that sha1sum is already used in other parts of the build system.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241011230311.2529760-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Joe Damato says:
====================
Add support for per-NAPI config via netlink
Greetings:
Welcome to v6. Minor changes from v5 [1], please see changelog below.
There were no explicit comments from reviewers on the call outs in my
v5, so I'm retaining them from my previous cover letter just in case :)
A few important call outs for reviewers:
1. This revision seems to work (see below for a full walk through). I
think this is the behavior we talked about, but please let me know if
a use case is missing.
2. Re a previous point made by Stanislav regarding "taking over a NAPI
ID" when the channel count changes: mlx5 seems to call napi_disable
followed by netif_napi_del for the old queues and then calls
napi_enable for the new ones. In this RFC, the NAPI ID generation is
deferred to napi_enable. This means we won't end up with two of the
same NAPI IDs added to the hash at the same time.
Can we assume all drivers will napi_disable the old queues before
napi_enable the new ones?
- If yes: we might not need to worry about a NAPI ID takeover
function.
- If no: I'll need to make a change so that the NAPI ID generation
is deferred only for drivers which have opted into the config
space via calls to netif_napi_add_config
3. I made the decision to remove the WARN_ON_ONCE that (I think?)
Jakub previously suggested in alloc_netdev_mqs (WARN_ON_ONCE(txqs
!= rxqs);) because this was triggering on every kernel boot with my
mlx5 NIC.
4. I left the "maxqs = max(txqs, rxqs);" in alloc_netdev_mqs despite
thinking this is a bit strange. I think it's strange that we might
be short some number of NAPI configs, but it seems like most people
are in favor of this approach, so I've left it.
I'd appreciate thoughts from reviewers on the above items, if at all
possible.
Now, on to the implementation.
Firstly, this implementation moves certain settings to napi_struct so that
they are "per-NAPI", while taking care to respect existing sysfs
parameters which are interface wide and affect all NAPIs:
- NAPI ID
- gro_flush_timeout
- defer_hard_irqs
Furthermore:
- NAPI ID generation and addition to the hash is now deferred to
napi_enable, instead of during netif_napi_add
- NAPIs are removed from the hash during napi_disable, instead of
netif_napi_del.
- An array of "struct napi_config" is allocated in net_device.
IMPORTANT: The above changes affect all network drivers.
Optionally, drivers may opt-in to using their config space by calling
netif_napi_add_config instead of netif_napi_add.
If a driver does this, the NAPI being added is linked with an allocated
"struct napi_config" and the per-NAPI settings (including NAPI ID) are
persisted even as hardware queues are destroyed and recreated.
To help illustrate how this would end up working, I've added patches for
3 drivers, of which I have access to only 1:
- mlx5 which is the basis of the examples below
- mlx4 which has TX only NAPIs, just to highlight that case. I have
only compile tested this patch; I don't have this hardware.
- bnxt which I have only compiled tested. I don't have this
hardware.
NOTE: I only tested this on mlx5; I have no access to the other hardware
for which I provided patches. Hopefully other folks can help test :)
Here's how it works when I test it on my mlx5 system:
$ ethtool -l eth4 | grep Combined | tail -1
Combined: 2
First, output the current NAPI settings:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 7}'
[{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 345,
'ifindex': 7,
'irq': 527},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 344,
'ifindex': 7,
'irq': 327}]
Now, set the global sysfs parameters:
$ sudo bash -c 'echo 20000 >/sys/class/net/eth4/gro_flush_timeout'
$ sudo bash -c 'echo 100 >/sys/class/net/eth4/napi_defer_hard_irqs'
Output current NAPI settings again:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 7}'
[{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 345,
'ifindex': 7,
'irq': 527},
{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 344,
'ifindex': 7,
'irq': 327}]
Now set NAPI ID 345, via its NAPI ID to specific values:
$ sudo ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/netdev.yaml \
--do napi-set \
--json='{"id": 345,
"defer-hard-irqs": 111,
"gro-flush-timeout": 11111}'
None
Now output current NAPI settings again to ensure only NAPI ID 345
changed:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 7}'
[{'defer-hard-irqs': 111,
'gro-flush-timeout': 11111,
'id': 345,
'ifindex': 7,
'irq': 527},
{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 344,
'ifindex': 7,
'irq': 327}]
Now, increase gro-flush-timeout only:
$ sudo ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/netdev.yaml \
--do napi-set --json='{"id": 345,
"gro-flush-timeout": 44444}'
None
Now output the current NAPI settings once more:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 7}'
[{'defer-hard-irqs': 111,
'gro-flush-timeout': 44444,
'id': 345,
'ifindex': 7,
'irq': 527},
{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 344,
'ifindex': 7,
'irq': 327}]
Now set NAPI ID 345 to have gro_flush_timeout of 0:
$ sudo ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/netdev.yaml \
--do napi-set --json='{"id": 345,
"gro-flush-timeout": 0}'
None
Check that NAPI ID 345 has a value of 0:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 7}'
[{'defer-hard-irqs': 111,
'gro-flush-timeout': 0,
'id': 345,
'ifindex': 7,
'irq': 527},
{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 344,
'ifindex': 7,
'irq': 327}]
Change the queue count, ensuring that NAPI ID 345 retains its settings:
$ sudo ethtool -L eth4 combined 4
Check that the new queues have the system wide settings but that NAPI ID
345 remains unchanged:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 7}'
[{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 347,
'ifindex': 7,
'irq': 529},
{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 346,
'ifindex': 7,
'irq': 528},
{'defer-hard-irqs': 111,
'gro-flush-timeout': 0,
'id': 345,
'ifindex': 7,
'irq': 527},
{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 344,
'ifindex': 7,
'irq': 327}]
Now reduce the queue count below where NAPI ID 345 is indexed:
$ sudo ethtool -L eth4 combined 1
Check the output:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 7}'
[{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 344,
'ifindex': 7,
'irq': 327}]
Re-increase the queue count to ensure NAPI ID 345 is re-assigned the same
values:
$ sudo ethtool -L eth4 combined 2
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 7}'
[{'defer-hard-irqs': 111,
'gro-flush-timeout': 0,
'id': 345,
'ifindex': 7,
'irq': 527},
{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 344,
'ifindex': 7,
'irq': 327}]
Create new queues to ensure the sysfs globals are used for the new NAPIs
but that NAPI ID 345 is unchanged:
$ sudo ethtool -L eth4 combined 8
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 7}'
[...]
{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 346,
'ifindex': 7,
'irq': 528},
{'defer-hard-irqs': 111,
'gro-flush-timeout': 0,
'id': 345,
'ifindex': 7,
'irq': 527},
{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 344,
'ifindex': 7,
'irq': 327}]
Last, but not least, let's try writing the sysfs parameters to ensure
all NAPIs are rewritten:
$ sudo bash -c 'echo 33333 >/sys/class/net/eth4/gro_flush_timeout'
$ sudo bash -c 'echo 222 >/sys/class/net/eth4/napi_defer_hard_irqs'
Check that worked:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 7}'
[...]
{'defer-hard-irqs': 222,
'gro-flush-timeout': 33333,
'id': 346,
'ifindex': 7,
'irq': 528},
{'defer-hard-irqs': 222,
'gro-flush-timeout': 33333,
'id': 345,
'ifindex': 7,
'irq': 527},
{'defer-hard-irqs': 222,
'gro-flush-timeout': 33333,
'id': 344,
'ifindex': 7,
'irq': 327}]
[1]: https://lore.kernel.org/20241009005525.13651-1-jdamato@fastly.com
v5: https://lore.kernel.org/20241009005525.13651-1-jdamato@fastly.com
rfcv4: https://lore.kernel.org/lkml/20241001235302.57609-1-jdamato@fastly.com
rfcv3: https://lore.kernel.org/20240912100738.16567-8-jdamato@fastly.com
rfcv2: https://lore.kernel.org/20240908160702.56618-1-jdamato@fastly.com
====================
Link: https://patch.msgid.link/20241011184527.16393-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use netif_napi_add_config to assign persistent per-NAPI config when
initializing RX CQ NAPIs.
Presently, struct napi_config only has support for two fields used for
RX, so there is no need to support them with TX CQs, yet.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20241011184527.16393-10-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use netif_napi_add_config to assign persistent per-NAPI config when
initializing NAPIs.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20241011184527.16393-9-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use netif_napi_add_config to assign persistent per-NAPI config when
initializing NAPIs.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20241011184527.16393-8-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support to set per-NAPI defer_hard_irqs and gro_flush_timeout.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241011184527.16393-7-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a persistent NAPI config area for NAPI configuration to the core.
Drivers opt-in to setting the persistent config for a NAPI by passing an
index when calling netif_napi_add_config.
napi_config is allocated in alloc_netdev_mqs, freed in free_netdev
(after the NAPIs are deleted).
Drivers which call netif_napi_add_config will have persistent per-NAPI
settings: NAPI IDs, gro_flush_timeout, and defer_hard_irq settings.
Per-NAPI settings are saved in napi_disable and restored in napi_enable.
Co-developed-by: Martin Karsten <mkarsten@uwaterloo.ca>
Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241011184527.16393-6-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support dumping gro_flush_timeout for a NAPI ID.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241011184527.16393-5-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow per-NAPI gro_flush_timeout setting.
The existing sysfs parameter is respected; writes to sysfs will write to
all NAPI structs for the device and the net_device gro_flush_timeout
field. Reads from sysfs will read from the net_device field.
The ability to set gro_flush_timeout on specific NAPI instances will be
added in a later commit, via netdev-genl.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20241011184527.16393-4-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support dumping defer_hard_irqs for a NAPI ID.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20241011184527.16393-3-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add defer_hard_irqs to napi_struct in preparation for per-NAPI
settings.
The existing sysfs parameter is respected; writes to sysfs will write to
all NAPI structs for the device and the net_device defer_hard_irq field.
Reads from sysfs show the net_device field.
The ability to set defer_hard_irqs on specific NAPI instances will be
added in a later commit, via netdev-genl.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20241011184527.16393-2-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PHYs performing rate-matching using MAC-side flow-control always
perform duplex-matching as well in case they are supporting
half-duplex modes at all.
No longer remove half-duplex modes from their capabilities.
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/b157c0c289cfba024039a96e635d037f9d946745.1728617993.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
tcp: add skb->sk to more control packets
Currently, TCP can set skb->sk for a variety of transmit packets.
However, packets sent on behalf of a TIME_WAIT sockets do not
have an attached socket.
Same issue for RST packets.
We want to change this, in order to increase eBPF program
capabilities.
This is slightly risky, because various layers could
be confused by TIME_WAIT sockets showing up in skb->sk.
v2: audited all sk_to_full_sk() users and addressed Martin feedback.
====================
Link: https://patch.msgid.link/20241010174817.1543642-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip_send_unicast_reply() send orphaned 'control packets'.
These are RST packets and also ACK packets sent from TIME_WAIT.
Some eBPF programs would prefer to have a meaningful skb->sk
pointer as much as possible.
This means that TCP can now attach TIME_WAIT sockets to outgoing
skbs.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Link: https://patch.msgid.link/20241010174817.1543642-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_v6_send_response() send orphaned 'control packets'.
These are RST packets and also ACK packets sent from TIME_WAIT.
Some eBPF programs would prefer to have a meaningful skb->sk
pointer as much as possible.
This means that TCP can now attach TIME_WAIT sockets to outgoing
skbs.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Link: https://patch.msgid.link/20241010174817.1543642-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This can be used to attach a socket to an skb,
taking a reference on sk->sk_refcnt.
This helper might be a NOP if sk->sk_refcnt is zero.
Use it from tcp_make_synack().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Link: https://patch.msgid.link/20241010174817.1543642-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP stack is not attaching skb to TIME_WAIT sockets yet,
but we would like to allow this in the future.
Add sk_listener_or_tw() helper to detect the three states
that FQ needs to take care.
Like NEW_SYN_RECV, TIME_WAIT are not full sockets and
do not contain sk->sk_pacing_status, sk->sk_pacing_rate.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Link: https://patch.msgid.link/20241010174817.1543642-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
