Add netns cookie test that verifies the helper is now supported and work
in the context of tc programs.
Signed-off-by: Mahe Tardy <mahe.tardy@gmail.com>
Link: https://lore.kernel.org/r/20241007095958.97442-2-mahe.tardy@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This is needed in the context of Cilium and Tetragon to retrieve netns
cookie from hostns when traffic leaves Pod, so that we can correlate
skb->sk's netns cookie.
Signed-off-by: Mahe Tardy <mahe.tardy@gmail.com>
Link: https://lore.kernel.org/r/20241007095958.97442-1-mahe.tardy@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
After a recent LLVM change [1] that deduces __cold on functions that only call
cold code (such as __init functions), there is a section mismatch warning from
__get_mem_config_intel(), which got moved to .text.unlikely. as a result of
that optimization:
WARNING: modpost: vmlinux: section mismatch in reference: \
__get_mem_config_intel+0x77 (section: .text.unlikely.) -> thread_throttle_mode_init (section: .init.text)
Mark __get_mem_config_intel() as __init as well since it is only called
from __init code, which clears up the warning.
While __rdt_get_mem_config_amd() does not exhibit a warning because it
does not call any __init code, it is a similar function that is only
called from __init code like __get_mem_config_intel(), so mark it __init
as well to keep the code symmetrical.
CONFIG_SECTION_MISMATCH_WARN_ONLY=n would turn this into a fatal error.
Fixes: 05b93417ce ("x86/intel_rdt/mba: Add primary support for Memory Bandwidth Allocation (MBA)")
Fixes: 4d05bf71f1 ("x86/resctrl: Introduce AMD QOS feature")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: <stable@kernel.org>
Link: 6b11573b8c [1]
Link: https://lore.kernel.org/r/20240917-x86-restctrl-get_mem_config_intel-init-v3-1-10d521256284@kernel.org
Creates a cgroup with a single nice CPU hog process running.
fork() is called to generate the nice process because un-nicing is
not possible (see man nice(3)). If fork() was not used to generate
the CPU hog, we would run the rest of the cgroup selftest suite as a
nice process.
Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cgroup-level CPU statistics currently include time spent on
user/system processes, but do not include niced CPU time (despite
already being tracked). This patch exposes niced CPU time to the
userspace, allowing users to get a better understanding of their
hardware limits and can facilitate more informed workload distribution.
A new field 'ntime' is added to struct cgroup_base_stat as opposed to
struct task_cputime to minimize footprint.
Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since the artifact paths for tools changed, we need to update the documentation to reflect that path.
Signed-off-by: Devaansh-Kumar <devaanshk840@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
WQ_MAX_ACTIVE is currently set to 512, which was established approximately
15 yeas ago. However, with the significant increase in machine sizes and
capabilities, the previous limit of 256 concurrent tasks is no longer
sufficient. Therefore, we propose to increase WQ_MAX_ACTIVE to 2048.
and WQ_DFL_ACTIVE is 1024 now.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
If something is expected to generate large number of concurrent works,
it should utilize its own dedicated workqueue rather than system wq.
Because this may saturate system_wq and potentially block other's works.
eg, cgroup release work. Let's document this as a note.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
A hung_task problem shown below was found:
INFO: task kworker/0:0:8 blocked for more than 327 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Workqueue: events cgroup_bpf_release
Call Trace:
<TASK>
__schedule+0x5a2/0x2050
? find_held_lock+0x33/0x100
? wq_worker_sleeping+0x9e/0xe0
schedule+0x9f/0x180
schedule_preempt_disabled+0x25/0x50
__mutex_lock+0x512/0x740
? cgroup_bpf_release+0x1e/0x4d0
? cgroup_bpf_release+0xcf/0x4d0
? process_scheduled_works+0x161/0x8a0
? cgroup_bpf_release+0x1e/0x4d0
? mutex_lock_nested+0x2b/0x40
? __pfx_delay_tsc+0x10/0x10
mutex_lock_nested+0x2b/0x40
cgroup_bpf_release+0xcf/0x4d0
? process_scheduled_works+0x161/0x8a0
? trace_event_raw_event_workqueue_execute_start+0x64/0xd0
? process_scheduled_works+0x161/0x8a0
process_scheduled_works+0x23a/0x8a0
worker_thread+0x231/0x5b0
? __pfx_worker_thread+0x10/0x10
kthread+0x14d/0x1c0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x59/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
This issue can be reproduced by the following pressuse test:
1. A large number of cpuset cgroups are deleted.
2. Set cpu on and off repeatly.
3. Set watchdog_thresh repeatly.
The scripts can be obtained at LINK mentioned above the signature.
The reason for this issue is cgroup_mutex and cpu_hotplug_lock are
acquired in different tasks, which may lead to deadlock.
It can lead to a deadlock through the following steps:
1. A large number of cpusets are deleted asynchronously, which puts a
large number of cgroup_bpf_release works into system_wq. The max_active
of system_wq is WQ_DFL_ACTIVE(256). Consequently, all active works are
cgroup_bpf_release works, and many cgroup_bpf_release works will be put
into inactive queue. As illustrated in the diagram, there are 256 (in
the acvtive queue) + n (in the inactive queue) works.
2. Setting watchdog_thresh will hold cpu_hotplug_lock.read and put
smp_call_on_cpu work into system_wq. However step 1 has already filled
system_wq, 'sscs.work' is put into inactive queue. 'sscs.work' has
to wait until the works that were put into the inacvtive queue earlier
have executed (n cgroup_bpf_release), so it will be blocked for a while.
3. Cpu offline requires cpu_hotplug_lock.write, which is blocked by step 2.
4. Cpusets that were deleted at step 1 put cgroup_release works into
cgroup_destroy_wq. They are competing to get cgroup_mutex all the time.
When cgroup_metux is acqured by work at css_killed_work_fn, it will
call cpuset_css_offline, which needs to acqure cpu_hotplug_lock.read.
However, cpuset_css_offline will be blocked for step 3.
5. At this moment, there are 256 works in active queue that are
cgroup_bpf_release, they are attempting to acquire cgroup_mutex, and as
a result, all of them are blocked. Consequently, sscs.work can not be
executed. Ultimately, this situation leads to four processes being
blocked, forming a deadlock.
system_wq(step1) WatchDog(step2) cpu offline(step3) cgroup_destroy_wq(step4)
...
2000+ cgroups deleted asyn
256 actives + n inactives
__lockup_detector_reconfigure
P(cpu_hotplug_lock.read)
put sscs.work into system_wq
256 + n + 1(sscs.work)
sscs.work wait to be executed
warting sscs.work finish
percpu_down_write
P(cpu_hotplug_lock.write)
...blocking...
css_killed_work_fn
P(cgroup_mutex)
cpuset_css_offline
P(cpu_hotplug_lock.read)
...blocking...
256 cgroup_bpf_release
mutex_lock(&cgroup_mutex);
..blocking...
To fix the problem, place cgroup_bpf_release works on a dedicated
workqueue which can break the loop and solve the problem. System wqs are
for misc things which shouldn't create a large number of concurrent work
items. If something is going to generate >WQ_DFL_ACTIVE(256) concurrent
work items, it should use its own dedicated workqueue.
Fixes: 4bfc0bb2c6 ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself")
Cc: stable@vger.kernel.org # v5.3+
Link: https://lore.kernel.org/cgroups/e90c32d2-2a85-4f28-9154-09c7d320cb60@huawei.com/T/#t
Tested-by: Vishal Chourasia <vishalc@linux.ibm.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
New:
implement fallocate for compressed files;
add support for the compression attribute;
optimize large writes to sparse files.
Fixed:
fix several potential deadlock scenarios;
fix various internal bugs detected by syzbot;
add checks before accessing NTFS structures during parsing;
correct the format of output messages.
Refactored:
replace fsparam_flag_no with fsparam_flag in options parser;
remove unused functions and macros.
-----BEGIN PGP SIGNATURE-----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=j71V
-----END PGP SIGNATURE-----
Merge tag 'ntfs3_for_6.12' of https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
"New:
- implement fallocate for compressed files
- add support for the compression attribute
- optimize large writes to sparse files
Fixes:
- fix several potential deadlock scenarios
- fix various internal bugs detected by syzbot
- add checks before accessing NTFS structures during parsing
- correct the format of output messages
Refactoring:
- replace fsparam_flag_no with fsparam_flag in options parser
- remove unused functions and macros"
* tag 'ntfs3_for_6.12' of https://github.com/Paragon-Software-Group/linux-ntfs3: (25 commits)
fs/ntfs3: Format output messages like others fs in kernel
fs/ntfs3: Additional check in ntfs_file_release
fs/ntfs3: Fix general protection fault in run_is_mapped_full
fs/ntfs3: Sequential field availability check in mi_enum_attr()
fs/ntfs3: Additional check in ni_clear()
fs/ntfs3: Fix possible deadlock in mi_read
ntfs3: Change to non-blocking allocation in ntfs_d_hash
fs/ntfs3: Remove unused al_delete_le
fs/ntfs3: Rename ntfs3_setattr into ntfs_setattr
fs/ntfs3: Replace fsparam_flag_no -> fsparam_flag
fs/ntfs3: Add support for the compression attribute
fs/ntfs3: Implement fallocate for compressed files
fs/ntfs3: Make checks in run_unpack more clear
fs/ntfs3: Add rough attr alloc_size check
fs/ntfs3: Stale inode instead of bad
fs/ntfs3: Refactor enum_rstbl to suppress static checker
fs/ntfs3: Fix sparse warning in ni_fiemap
fs/ntfs3: Fix warning possible deadlock in ntfs_set_state
fs/ntfs3: Fix sparse warning for bigendian
fs/ntfs3: Separete common code for file_read/write iter/splice
...
cfag12864b_getrate() and cfag12864b_isenabled() were both added
in commit 70e840499a ("[PATCH] drivers: add LCD support")
but never used.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- Fix an assert() to handle captured and unprocessed ARM CoreSight CPU traces.
- Fix static build compilation error when libdw isn't installed or is too old.
- Add missing include when building with !HAVE_DWARF_GETLOCATIONS_SUPPORT.
- Add missing refcount put on 32-bit DSOs.
- Fix disassembly of user space binaries by setting the binary_type of DSO when
loading.
- Update headers with the kernel sources, including asound.h, sched.h, fcntl,
msr-index.h, irq_vectors.h, socket.h, list_sort.c and arm64's cputype.h.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZwU2dgAKCRCyPKLppCJ+
J8uaAQDEbp0lMf1S/Y6vOGbnP6mGQCewQsXtIpSA4gcRMWlCCgD+O6ZxbnBCHOzn
nQfBmbT62qUGuUA38Mg7pCyRXBd8FgU=
=s4JZ
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.12-1-2024-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix an assert() to handle captured and unprocessed ARM CoreSight CPU
traces
- Fix static build compilation error when libdw isn't installed or is
too old
- Add missing include when building with
!HAVE_DWARF_GETLOCATIONS_SUPPORT
- Add missing refcount put on 32-bit DSOs
- Fix disassembly of user space binaries by setting the binary_type of
DSO when loading
- Update headers with the kernel sources, including asound.h, sched.h,
fcntl, msr-index.h, irq_vectors.h, socket.h, list_sort.c and arm64's
cputype.h
* tag 'perf-tools-fixes-for-v6.12-1-2024-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf cs-etm: Fix the assert() to handle captured and unprocessed cpu trace
perf build: Fix build feature-dwarf_getlocations fail for old libdw
perf build: Fix static compilation error when libdw is not installed
perf dwarf-aux: Fix build with !HAVE_DWARF_GETLOCATIONS_SUPPORT
tools headers arm64: Sync arm64's cputype.h with the kernel sources
perf tools: Cope with differences for lib/list_sort.c copy from the kernel
tools check_headers.sh: Add check variant that excludes some hunks
perf beauty: Update copy of linux/socket.h with the kernel sources
tools headers UAPI: Sync the linux/in.h with the kernel sources
perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools include UAPI: Sync linux/fcntl.h copy with the kernel sources
tools include UAPI: Sync linux/sched.h copy with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
perf vdso: Missed put on 32-bit dsos
perf symbol: Set binary_type of dso when loading
Use function dev_err_probe() in the probe path instead of dev_err() where
appropriate, to make the code a bit more uniform and compact. Use the new
function dev_warn_probe() to improve error handling for the TX and RX DMA
channel requests, which are actually optional, and tweak the logged warnings
a bit to additionally describe their optional nature.
Previously, deferred requests for the TX and RX DMA channels produced no
debug messages, and the final error messages didn't include the error codes,
which are all highly useful when debugging permanently failed DMA channel
requests, such as when the required drivers aren't enabled.
Suggested-by: Hélene Vulquin <oss@helene.moe>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Tested-by: Hélène Vulquin <oss@helene.moe>
Link: https://patch.msgid.link/5b6bd142dab3ab93d7039db3e2fdcfea6bee2217.1727601608.git.dsimic@manjaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Some drivers can still provide their functionality to a certain extent
even when some of their resource acquisitions eventually fail. In such
cases, emitting errors isn't the desired action, but warnings should be
emitted instead.
To solve this, introduce dev_warn_probe() as a new device probe log helper,
which behaves identically as the already existing dev_err_probe(), while it
produces warnings instead of errors. The intended use is with the resources
that are actually optional for a particular driver.
While there, copyedit the kerneldoc for dev_err_probe() a bit, to simplify
its wording a bit, and reuse it as the kerneldoc for dev_warn_probe(), with
the necessary wording adjustments, of course.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Tested-by: Hélène Vulquin <oss@helene.moe>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2be0a28538bb2a3d1bcc91e2ca1f2d0dc09146d9.1727601608.git.dsimic@manjaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Perform a couple of trivial code cleanups, to avoid unnecessary line wrapping
by using the 100-column width a bit better, and to drop a stray empty line.
No intended functional changes are introduced by these code cleanups.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://patch.msgid.link/4dcd5d9cc4a20c9c6ad504d945475b767399b32f.1727601608.git.dsimic@manjaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Perform a few trivial code cleanups, to obey the reverse Christmas tree rule,
to avoid unnecessary line wrapping by using the 100-column width better, to
actually obey the 100-column width in one case, and to make the way a couple
of wrapped function arguments are indented a bit more readable.
No intended functional changes are introduced by these code cleanups.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://patch.msgid.link/1b55380a0b9f0e8fe1a09611636b30e232b95d08.1727601608.git.dsimic@manjaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Including the network_helpers.h header in tests can lead to the following
build error:
./network_helpers.h: In function ‘csum_tcpudp_magic’:
./network_helpers.h:116:14: error: implicit declaration of function \
‘htons’ [-Werror=implicit-function-declaration]
116 | s += htons(proto + len);
The error is avoided in many cases thanks to some other headers included
earlier and bringing in arpa/inet.h (ie: test_progs.h).
Make sure that test_progs build success does not depend on header ordering
by adding the missing header include in network_helpers.h
Fixes: f6642de0c3 ("selftests/bpf: Add csum helpers")
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241008-network_helpers_fix-v1-1-2c2ae03df7ef@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Fixes: e3b1be2e73 ("iommu/arm-smmu-v3: Reorganize struct arm_smmu_ctx_desc_cfg")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240923021557.3432068-1-nichen@iscas.ac.cn
Signed-off-by: Will Deacon <will@kernel.org>
The function arm_smmu_init_strtab_2lvl uses the expression
((1 << smmu->sid_bits) - 1)
to calculate the largest StreamID value. However, this fails for the
maximum allowed value of SMMU_IDR1.SIDSIZE which is 32. The C standard
states:
"If the value of the right operand is negative or is greater than or
equal to the width of the promoted left operand, the behavior is
undefined."
With smmu->sid_bits being 32, the prerequisites for undefined behavior
are met. We observed that the value of (1 << 32) is 1 and not 0 as we
initially expected.
Similar bit shift operations in arm_smmu_init_strtab_linear seem to not
be affected, because it appears to be unlikely for an SMMU to have
SMMU_IDR1.SIDSIZE set to 32 but then not support 2-level Stream tables
This issue was found by Ryan Huang <tzukui@google.com> on our team.
Fixes: ce410410f1 ("iommu/arm-smmu-v3: Add arm_smmu_strtab_l1/2_idx()")
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Link: https://lore.kernel.org/r/20241002015357.1766934-1-danielmentz@google.com
Signed-off-by: Will Deacon <will@kernel.org>
CPRE workarounds are implicated in at least 5 MMU-500 errata, some of
which remain unfixed. The comment and warning message have proven to be
unhelpfully misleading about this scope, so reword them to get the point
across with less risk of going out of date or confusing users.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/dfa82171b5248ad7cf1f25592101a6eec36b8c9a.1728400877.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Sparse warnings:
drivers/spi/spi-imx.c:410:19: warning: cast to restricted __be32
drivers/spi/spi-imx.c:410:19: warning: cast to restricted __be32
drivers/spi/spi-imx.c:410:19: warning: cast to restricted __be32
drivers/spi/spi-imx.c:410:19: warning: cast to restricted __be32
drivers/spi/spi-imx.c:410:19: warning: cast to restricted __be32
drivers/spi/spi-imx.c:410:19: warning: cast to restricted __be32
drivers/spi/spi-imx.c:439:21: warning: incorrect type in assignment (different base types)
drivers/spi/spi-imx.c:439:21: expected unsigned int [addressable] [usertype] val
drivers/spi/spi-imx.c:439:21: got restricted __be32 [usertype]
Signed-off-by: Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20241008055644.4900-3-hardevsinh.palaniya@siliconsignals.io
Signed-off-by: Mark Brown <broonie@kernel.org>
Save manual engine capture into capture list.
This removes duplicate register definitions across manual-capture vs
guc-err-capture.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193428.3311145-7-zhanjun.dong@intel.com
When we decide to kill a job, (from guc_exec_queue_timedout_job), we could
end up with 4 possible scenarios at this starting point of this decision:
1. the guc-captured register-dump is already there.
2. the driver is wedged.mode > 1, so GuC-engine-reset / GuC-err-capture
will not happen.
3. the user has started the driver in execlist-submission mode.
4. the guc-captured register-dump is not ready yet so we force GuC to kill
that context now, but:
A. we don't know yet if GuC will be successful on the engine-reset
and get the guc-err-capture, else kmd will do a manual reset later
OR B. guc will be successful and we will get a guc-err-capture
shortly.
So to accomdate the scenarios of 2 and 4A, we will need to do a manual KMD
capture first(which is not be reliable in guc-submission mode) and decide
later if we need to use that for the cases of 2 or 4A. So this flow is
part of the implementation for this patch.
Provide xe_guc_capture_get_reg_desc_list to get the register dscriptor
list.
Add manual capture by read from hw engine if GuC capture is not ready.
If it becomes ready at later time, GuC sourced data will be used.
Although there may only be a small delay between (1) the check for whether
guc-err-capture is available at the start of guc_exec_queue_timedout_job
and (2) the decision on using a valid guc-err-capture or manual-capture,
lets not take any chances and lock the matching node down so it doesn't
get re-claimed if GuC-Err-Capture subsystem is running out of pre-cached
nodes.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193428.3311145-6-zhanjun.dong@intel.com
Upon the G2H Notify-Err-Capture event, parse through the
GuC Log Buffer (error-capture-subregion) and generate one or
more capture-nodes. A single node represents a single "engine-
instance-capture-dump" and contains at least 3 register lists:
global, engine-class and engine-instance. An internal link
list is maintained to store one or more nodes.
Because the link-list node generation happen before the call
to devcoredump, duplicate global and engine-class register
lists for each engine-instance register dump if we find
dependent-engine resets in a engine-capture-group.
To avoid dynamically allocate the output nodes during gt reset,
pre-allocate a fixed number of empty nodes up front (at the
time of ADS registration) that we can consume from or return to
an internal cached list of nodes.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193428.3311145-5-zhanjun.dong@intel.com
Capture-nodes generated by GuC are placed in the GuC capture ring
buffer which is a sub-region of the larger Guc-Log-buffer.
Add capture output size check before allocating the shared buffer.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193428.3311145-4-zhanjun.dong@intel.com
Add the ability for runtime allocation and freeing of
steered register list extentions that depend on the
detected HW config fuses.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193428.3311145-3-zhanjun.dong@intel.com
Add referenced registers defines and list of registers.
Update GuC ADS size allocation to include space for
the lists of error state capture register descriptors.
Then, populate GuC ADS with the lists of registers we want
GuC to report back to host on engine reset events. This list
should include global, engine-class and engine-instance
registers for every engine-class type on the current hardware.
Ensure we allocate a persistent storage for the register lists
that are populated into ADS so that we don't need to allocate
memory during GT resets when GuC is reloaded and ADS population
happens again.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193428.3311145-2-zhanjun.dong@intel.com
MCR steering on Xe3 media IP is almost the same as it was on Xe2, except
for one new range (0x38D0D0 - 0x38D0FF) which has changed to an MCR
"MEDIAINF" range on Xe3. Since we can always steer to grpid /
instanceid 0 for MEDIAINF ranges, define a new "INSTANCE0" steering
table for Xe3 media. Xe3 can continue to use the same OADDRM/GPMXMT
table as Xe2.
v2: Merge continuous entries 38D0D0 - 38F0FF
Bspec: 74298
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008013509.61233-7-matthew.s.atwood@intel.com
PTL is an integrated GPU based on the Xe3 architecture.
v2: explicitly turn off display until display patches land.
Bspec: 72574
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008013509.61233-6-matthew.s.atwood@intel.com
PTL is Xe3 architecture but there is no difference between LNL and PTL
in MOCS table. So, PTL uses the same MOCS table as LNL.
Bspec: 71582
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008013509.61233-5-matthew.s.atwood@intel.com
Define a common set of Xe3 feature flags and definitions that will be
used for all platforms in this family.
The feature flags are inherited unchanged from the Xe2 (XE2_FEATURES)
platform.
Following B-spec details inherited from Xe2 feature flag definition
commit.
v2: reuse graphics_xe2 definition
Bspec: 58695
- dma_mask_size remains 46 (not documented in bspec)
- supports_usm=1 (Bspec 59651)
- has_flatccs=1 (Bspec 58797)
- has_4tile=1 (Bspec 58788)
- has_asid=1 (Bspec 59654, 59265, 60288)
- has_range_tlb_invalidate=1 (Bspec 71126)
- five-level page table (Bspec 59505)
- 1 VD + 1 VE + 1 SFC (Bspec 67103, 70819)
- platform engine mask (Bspec 60149)
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008013509.61233-3-matthew.s.atwood@intel.com
It is possible that an interrupt is disabled and masked at the same time.
When the interrupt is enabled again by enable_irq(), only plic_irq_enable()
is called, not plic_irq_unmask(). The interrupt remains masked and never
raises.
An example where interrupt is both disabled and masked is when
handle_fasteoi_irq() is the handler, and IRQS_ONESHOT is set. The interrupt
handler:
1. Mask the interrupt
2. Handle the interrupt
3. Check if interrupt is still enabled, and unmask it (see
cond_unmask_eoi_irq())
If another task disables the interrupt in the middle of the above steps,
the interrupt will not get unmasked, and will remain masked when it is
enabled in the future.
The problem is occasionally observed when PREEMPT_RT is enabled, because
PREEMPT_RT adds the IRQS_ONESHOT flag. But PREEMPT_RT only makes the problem
more likely to appear, the bug has been around since commit a1706a1c50
("irqchip/sifive-plic: Separate the enable and mask operations").
Fix it by unmasking interrupt in plic_irq_enable().
Fixes: a1706a1c50 ("irqchip/sifive-plic: Separate the enable and mask operations")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241003084152.2422969-1-namcao@linutronix.de
Kunkun Jiang reported that there is a small window of opportunity for
userspace to force a change of affinity for a VPE while the VPE has already
been unmapped, but the corresponding doorbell interrupt still visible in
/proc/irq/.
Plug the race by checking the value of vmapp_count, which tracks whether
the VPE is mapped ot not, and returning an error in this case.
This involves making vmapp_count common to both GICv4.1 and its v4.0
ancestor.
Fixes: 64edfaa9a2 ("irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP")
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/c182ece6-2ba0-ce4f-3404-dba7a3ab6c52@huawei.com
Link: https://lore.kernel.org/all/20241002204959.2051709-1-maz@kernel.org
Starting with 6.12 commit 85585b4bc8 ("selftests: add ncdevmem, netcat
for devmem TCP") kselftest-all creates additional outputs that
kselftest-clean does not cleanup:
$ make defconfig
$ make kselftest-all
$ make kselftest-clean
$ git clean -ndxf | grep tools/net
Would remove tools/net/ynl/lib/__pycache__/
Would remove tools/net/ynl/lib/ynl.a
Would remove tools/net/ynl/lib/ynl.d
Would remove tools/net/ynl/lib/ynl.o
Make kselftest-clean remove the newly added net/ynl outputs.
Fixes: 85585b4bc8 ("selftests: add ncdevmem, netcat for devmem TCP")
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20241005215600.852260-1-gthelen@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The YAML format has a couple of different forms for multi-line text
blocks which control allowed characters and handling of line-breaks.
Getting this wrong is a common review issue. Either a literal block is
used when there's no formatting needed or a folded/literal block is
not used when there is formatting to maintain.
Add some descriptions of the different forms to point folks to in
reviews.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240918195130.2024205-2-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The generated include.sh should be ignored by git. Create a new
gitignore and add the file to the list.
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241005-net-selftests-gitignore-v2-3-3a0b2876394a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The include.sh file is generated when building the net/rds selftests,
but there is no rule to delete it with the clean target. Add the file to
EXTRA_CLEAN in order to remove it when required.
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241005-net-selftests-gitignore-v2-2-3a0b2876394a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The sizeof(struct napi_struct) can change. Don't hardcode the size to
400 bytes and instead use "sizeof(struct napi_struct)".
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241004105407.73585-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, mem_ce and mem iomem addresses are used to calculate the
CE offset address. mem_ce is initialized with mem address, and for
targets where ce_remap is needed, mem_ce is remapped to a new address
space during AHB probe.
For targets such as WCN6750 in which CE address space is same as WCSS
address space (i.e. "ce_remap" hw_param is set to false), mem_ce and
mem iomem addresses are same. In the initial SRNG setup for such targets,
the CE offset address and hence CE register base addresses are
calculated correctly in ath11k_hal_srng_init() as both mem and mem_ce
are initialized with same iomem address.
Later, after the firmware download, mem is initialized with BAR address
received in qmi_wlanfw_device_info_resp_msg_v01 QMI message, while mem_ce
is not updated.
After initial setup success, during Subsystem Restart (SSR), as part
of reinitialization, ath11k_hal_srng_init() will be called again,
and CE offset address will be calculated incorrectly this time as mem_ce
address was not updated. Due to the incorrect CE offset address,
APPS accesses an invalid CE register address which leads to improper
behavior in firmware after SSR is triggered.
To fix the above issue, update mem_ce to mem iomem address in
ath11k_qmi_request_device_info() for targets which do not support
ce_remap feature.
Signed-off-by: Balaji Pothunoori <quic_bpothuno@quicinc.com>
Fixes: b42b3678c9 ("wifi: ath11k: remap ce register space for IPQ5018")
Link: https://patch.msgid.link/20240927095825.22317-1-quic_bpothuno@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Recent topology checks of the x86 boot code uncovered the need for
PV guests to have the boot cpu marked in the APICBASE MSR.
Fixes: 9d22c96316 ("x86/topology: Handle bogus ACPI tables correctly")
Reported-by: Niels Dettenbach <nd@syndicat.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Make sure to always set the GEM function pointer even for in kernel
allocations. This fixes a NULL pointer deref caused by switching to GEM
references.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: fd69ef0502 ("drm/radeon: use GEM references instead of TTMs")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 01b64bc063)
The resctrl schemata file supports specifying memory bandwidth associated with
the Memory Bandwidth Allocation (MBA) feature via a percentage (this is the
default) or bandwidth in MiBps (when resctrl is mounted with the "mba_MBps"
option).
The allowed range for the bandwidth percentage is from
/sys/fs/resctrl/info/MB/min_bandwidth to 100, using a granularity of
/sys/fs/resctrl/info/MB/bandwidth_gran. The supported range for the MiBps
bandwidth is 0 to U32_MAX.
There are two issues with parsing of MiBps memory bandwidth:
* The user provided MiBps is mistakenly rounded up to the granularity
that is unique to percentage input.
* The user provided MiBps is parsed using unsigned long (thus accepting
values up to ULONG_MAX), and then assigned to u32 that could result in
overflow.
Do not round up the MiBps value and parse user provided bandwidth as the u32
it is intended to be. Use the appropriate kstrtou32() that can detect out of
range values.
Fixes: 8205a078ba ("x86/intel_rdt/mba_sc: Add schemata support")
Fixes: 6ce1560d35 ("x86/resctrl: Switch over to the resctrl mbps_val list")
Co-developed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Martin Kletzander <nert.pinx@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
