Per the binding, omitting the clock frequency from a Geni I2C controller
node defaults the bus to 100Khz. But at least in Linux, a friendly info
print highlights the lack of explicitly defined frequency in the
DeviceTree.
Specify the frequency, to give it an explicit value, and to silence the
log print in Linux.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241004-i2c1-frequency-v1-1-77a359015d54@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QCM6490 is a variant of SC7280, with the usual set of protection
domains, and hence the need for a PD-mapper. In particular USB Type-C
port management and battery management is pmic_glink based.
Add an entry to the kernel, to avoid the need for userspace to provide
this service.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241004-qcm6490-pd-mapper-v1-1-d6f4bc3bffa3@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Convert the binding to yaml.
The codec seems to be from Innosilicon, but the compatible has ever only
been rockchip-based, as they sythesized the codec for the rk3036.
So the yaml file gets a name matching that compatible.
The only other notable change is the addition of the #sound-dai-cells
property, that is always required.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20241007205639.2477635-1-heiko@sntech.de
Signed-off-by: Mark Brown <broonie@kernel.org>
When adding a delayed ref head, at delayed-ref.c:add_delayed_ref_head(),
if we fail to insert the qgroup record we don't error out, we ignore it.
In fact we treat it as if there was no error and there was already an
existing record - we don't distinguish between the cases where
btrfs_qgroup_trace_extent_nolock() returns 1, meaning a record already
existed and we can free the given record, and the case where it returns
a negative error value, meaning the insertion into the xarray that is
used to track records failed.
Effectively we end up ignoring that we are lacking qgroup record in the
dirty extents xarray, resulting in incorrect qgroup accounting.
Fix this by checking for errors and return them to the callers.
Fixes: 3cce39a8ca ("btrfs: qgroup: use xarray to track dirty extents in transaction")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are reports that system cannot suspend due to running trim because
the task responsible for trimming the device isn't able to finish in
time, especially since we have a free extent discarding phase, which can
trim a lot of unallocated space. There are no limits on the trim size
(unlike the block group part).
Since trime isn't a critical call it can be interrupted at any time,
in such cases we stop the trim, report the amount of discarded bytes and
return an error.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219180
Link: https://bugzilla.suse.com/show_bug.cgi?id=1229737
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Per Qu Wenruo in case we have a very large disk, e.g. 8TiB device,
mostly empty although we will do the split according to our super block
locations, the last super block ends at 256G, we can submit a huge
discard for the range [256G, 8T), causing a large delay.
Split the space left to discard based on BTRFS_MAX_DISCARD_CHUNK_SIZE in
preparation of introduction of cancellation points to trim. The value
of the chunk size is arbitrary, it can be higher or derived from actual
device capabilities but we can't easily read that using
bio_discard_limit().
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219180
Link: https://bugzilla.suse.com/show_bug.cgi?id=1229737
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A previous patch addressed a fortified-memcpy warning on older compilers,
but there is still a warning on gcc-14 in some configurations:
In file included from include/linux/string.h:390,
from drivers/net/wireless/ath/ath12k/wow.c:7:
drivers/net/wireless/ath/ath12k/wow.c: In function 'ath12k_wow_convert_8023_to_80211.isra':
include/linux/fortify-string.h:114:33: error: '__builtin_memcpy' accessing 18446744073709551610 or more bytes at offsets 0 and 0 overlaps 9223372036854775797 bytes at offset -9223372036854775803 [-Werror=restrict]
include/linux/fortify-string.h:679:26: note: in expansion of macro '__fortify_memcpy_chk'
679 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/ath/ath12k/wow.c:199:25: note: in expansion of macro 'memcpy'
199 | memcpy(pat + a3_ofs - pkt_ofs,
| ^~~~~~
Address this the same way as the other two, using size_add().
Fixes: b49991d83b ("wifi: ath12k: fix build vs old compiler")
Fixes: 4a3c212eee ("wifi: ath12k: add basic WoW functionalities")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241004095420.637091-1-arnd@kernel.org
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
The API print_array_to_buf() currently supports printing
arrays with 0 indexing. In some cases, a few arrays need
to be printed with 1-based indexing, i.e., array should be
printed, starting with 1.
Add a new version of print_array_to_buf(), named
print_array_to_buf_index(), which implements the functionality
of print_array_to_index(), but with an extra variable, pointing
to the index starting with which the array should be printed.
Modify print_array_to_buf() to call
print_array_to_buf_index() with 0 as the starting index.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20241004085915.1788951-1-quic_rdevanat@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
During ath12k module removal, in ath12k_core_deinit(),
ath12k_mac_destroy() un-registers ah->hw from mac80211 and frees
the ah->hw as well as all the ar's in it. After this
ath12k_core_soc_destroy()-> ath12k_dp_free()-> ath12k_dp_cc_cleanup()
tries to access one of the freed ar's from pending skb.
This is because during mac destroy, driver failed to flush few
data packets, which were accessed later in ath12k_dp_cc_cleanup()
and freed, but using ar from the packet led to this use-after-free.
BUG: KASAN: use-after-free in ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k]
Write of size 4 at addr ffff888150bd3514 by task modprobe/8926
CPU: 0 UID: 0 PID: 8926 Comm: modprobe Not tainted
6.11.0-rc2-wt-ath+ #1746
Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS
HNKBLi70.86A.0067.2021.0528.1339 05/28/2021
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xe0
print_address_description.constprop.0+0x33/0x3a0
print_report+0xb5/0x260
? kasan_addr_to_slab+0x24/0x80
kasan_report+0xd8/0x110
? ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k]
? ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k]
kasan_check_range+0xf3/0x1a0
__kasan_check_write+0x14/0x20
ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k]
ath12k_dp_free+0x178/0x420 [ath12k]
ath12k_core_stop+0x176/0x200 [ath12k]
ath12k_core_deinit+0x13f/0x210 [ath12k]
ath12k_pci_remove+0xad/0x1c0 [ath12k]
pci_device_remove+0x9b/0x1b0
device_remove+0xbf/0x150
device_release_driver_internal+0x3c3/0x580
? __kasan_check_read+0x11/0x20
driver_detach+0xc4/0x190
bus_remove_driver+0x130/0x2a0
driver_unregister+0x68/0x90
pci_unregister_driver+0x24/0x240
? find_module_all+0x13e/0x1e0
ath12k_pci_exit+0x10/0x20 [ath12k]
__do_sys_delete_module+0x32c/0x580
? module_flags+0x2f0/0x2f0
? kmem_cache_free+0xf0/0x410
? __fput+0x56f/0xab0
? __fput+0x56f/0xab0
? debug_smp_processor_id+0x17/0x20
__x64_sys_delete_module+0x4f/0x70
x64_sys_call+0x522/0x9f0
do_syscall_64+0x64/0x130
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f8182c6ac8b
Commit 24de1b7b23 ("wifi: ath12k: fix flush failure in recovery
scenarios") added the change to decrement the pending packets count
in case of recovery which make sense as ah->hw as well all
ar's in it are intact during recovery, but during core deinit there
is no use in decrementing packets count or waking up the empty waitq
as the module is going to be removed also ar's from pending skb's
can't be used and the packets should just be released back.
To fix this, avoid accessing ar from skb->cb when driver is being
unregistered.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: 24de1b7b23 ("wifi: ath12k: fix flush failure in recovery scenarios")
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20241001092652.3134334-1-quic_ramess@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
The only known user of this interface was libselinux and its
internal usage of this interface for get_ordered_context_list(3)
was removed in Feb 2020, with a deprecation warning added to
security_compute_user(3) at the same time. Add a deprecation
warning to the kernel and schedule it for final removal in 2025.
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Streamline the code in selinux_nlmsg_lookup() to improve the code flow,
readability, and remove the unnecessary local variables.
Tested-by: Thiébaud Weksteen <tweek@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Reuse the existing extended permissions infrastructure to support
policies based on the netlink message types.
A new policy capability "netlink_xperm" is introduced. When disabled,
the previous behaviour is preserved. That is, netlink_send will rely on
the permission mappings defined in nlmsgtab.c (e.g, nlmsg_read for
RTM_GETADDR on NETLINK_ROUTE). When enabled, the mappings are ignored
and the generic "nlmsg" permission is used instead.
The new "nlmsg" permission is an extended permission. The 16 bits of the
extended permission are mapped to the nlmsg_type field.
Example policy on Android, preventing regular apps from accessing the
device's MAC address and ARP table, but allowing this access to
privileged apps, looks as follows:
allow netdomain self:netlink_route_socket {
create read getattr write setattr lock append connect getopt
setopt shutdown nlmsg
};
allowxperm netdomain self:netlink_route_socket nlmsg ~{
RTM_GETLINK RTM_GETNEIGH RTM_GETNEIGHTBL
};
allowxperm priv_app self:netlink_route_socket nlmsg {
RTM_GETLINK RTM_GETNEIGH RTM_GETNEIGHTBL
};
The constants in the example above (e.g., RTM_GETLINK) are explicitly
defined in the policy.
It is possible to generate policies to support kernels that may or
may not have the capability enabled by generating a rule for each
scenario. For instance:
allow domain self:netlink_audit_socket nlmsg_read;
allow domain self:netlink_audit_socket nlmsg;
allowxperm domain self:netlink_audit_socket nlmsg { AUDIT_GET };
The approach of defining a new permission ("nlmsg") instead of relying
on the existing permissions (e.g., "nlmsg_read", "nlmsg_readpriv" or
"nlmsg_tty_audit") has been preferred because:
1. This is similar to the other extended permission ("ioctl");
2. With the new extended permission, the coarse-grained mapping is not
necessary anymore. It could eventually be removed, which would be
impossible if the extended permission was defined below these.
3. Having a single extra extended permission considerably simplifies
the implementation here and in libselinux.
Signed-off-by: Thiébaud Weksteen <tweek@google.com>
Signed-off-by: Bram Bonné <brambonne@google.com>
[PM: manual merge fixes for sock_skip_has_perm()]
Signed-off-by: Paul Moore <paul@paul-moore.com>
elevator_get_default() and elv_support_iosched() both check for whether
or not q->tag_set is non-NULL, however it's not possible for them to be
NULL. This messes up some static checkers, as the checking of tag_set
isn't consistent.
Remove the checks, which both simplifies the logic and avoids checker
errors.
Signed-off-by: SurajSonawane2415 <surajsonawane0215@gmail.com>
Link: https://lore.kernel.org/r/20241007111416.13814-1-surajsonawane0215@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
scx_qmap and other schedulers in the SCX repo are using SCX_ENQ_WAKEUP to
tell whether ops.select_cpu() was called. This is incorrect as
ops.select_cpu() can be skipped in the wakeup path and leads to e.g.
incorrectly skipping direct dispatch for tasks that are bound to a single
CPU.
sched core has been updated to specify ENQUEUE_RQ_SELECTED if
->select_task_rq() was called. Map it to SCX_ENQ_CPU_SELECTED and update
scx_qmap to test it instead of SCX_ENQ_WAKEUP.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Cc: Daniel Hodges <hodges.daniel.scott@gmail.com>
Cc: Changwoo Min <multics69@gmail.com>
Cc: Andrea Righi <andrea.righi@linux.dev>
Cc: Dan Schatzberg <schatzberg.dan@gmail.com>
During ttwu, ->select_task_rq() can be skipped if only one CPU is allowed or
migration is disabled. sched_ext schedulers may perform operations such as
direct dispatch from ->select_task_rq() path and it is useful for them to
know whether ->select_task_rq() was skipped in the ->enqueue_task() path.
Currently, sched_ext schedulers are using ENQUEUE_WAKEUP for this purpose
and end up assuming incorrectly that ->select_task_rq() was called for tasks
that are bound to a single CPU or migration disabled.
Make select_task_rq() indicate whether ->select_task_rq() was called by
setting WF_RQ_SELECTED in *wake_flags and make ttwu_do_activate() map that
to ENQUEUE_RQ_SELECTED for ->enqueue_task().
This will be used by sched_ext to fix ->select_task_rq() skip detection.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
This will be used to allow select_task_rq() to indicate whether
->select_task_rq() was called by modifying *wake_flags.
This makes try_to_wake_up() call all functions that take wake_flags with
WF_TTWU set. Previously, only select_task_rq() was. Using the same flags is
more consistent, and, as the flag is only tested by ->select_task_rq()
implementations, it doesn't cause any behavior differences.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
The driver(drivers/irqchip/irq-ls-extirq.c) have not use standard DT
function to parser interrupt-map. So it doesn't consider '#address-size'
in parent interrupt controller, such as GIC.
When dt-binding verify interrupt-map, item data matrix is spitted at
incorrect position. So cause below warning:
arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dtb: interrupt-controller@14:
interrupt-map: [[0, 0, 1, 0, 0, 4, 1, 0], [1, 0, 1, 4, 2, 0, 1, 0], ...
is too short
Remove interrupt-map restriction to workaround this warning for
'fsl,ls1088a-extirq', 'fsl,ls2080a-extirq' and fsl,lx2160a-extirq.
Other keep the same restriction.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241007161823.811021-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Recently the loongarch defconfig stopped working with the default 128 MiB
of memory. The VM just spins infinitively.
Increasing the available memory to 1 GiB, similar to s390, fixes the
issue. To avoid having to do this for each architecture on its own,
proactively apply to all architectures.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20241007-nolibc-qemu-mem-v1-1-c1c2f9acd0f8@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Recent version of GCC and clang gained -Wimplicit-fallthrough,
warning about implicit fall-through between switch labels.
As nolibc does not control the compilation flags, this can trigger
warnings for when built by the user.
Make use of the "fallthrough" attribute to explicitly annotate the
expected fall-throughs and silence the warning.
Link: https://lore.kernel.org/r/20240930-nolibc-fallthrough-v2-1-2e8d10fe3430@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
arch-s390.h uses types from std.h, but does not include it.
Depending on the inclusion order the compilation can fail.
Include std.h explicitly to avoid these errors.
Fixes: 404fa87c0e ("tools/nolibc: s390: provide custom implementation for sys_fork")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20240927-nolibc-s390-std-h-v1-1-30442339a6b9@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
msi-parent is standard property. Needn't ref to phandle. Add maxItems: 1
for it.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dtb: fsl-mc@80c000000: msi-parent:0: [16, 0] is too long
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241007153047.807723-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The term "receiver" means that a type can be used as the type of `self`,
and thus enables method call syntax `foo.bar()` instead of
`Foo::bar(foo)`. Stable Rust as of today (1.81) enables a limited
selection of types (primitives and types in std, e.g. `Box` and `Arc`)
to be used as receivers, while custom types cannot.
We want the kernel `Arc` type to have the same functionality as the Rust
std `Arc`, so we use the `Receiver` trait (gated behind `receiver_trait`
unstable feature) to gain the functionality.
The `arbitrary_self_types` RFC [1] (tracking issue [2]) is accepted and
it will allow all types that implement a new `Receiver` trait (different
from today's unstable trait) to be used as receivers. This trait will be
automatically implemented for all `Deref` types, which include our `Arc`
type, so we no longer have to opt-in to be used as receiver. To prepare
us for the change, remove the `Receiver` implementation and the
associated feature. To still allow `Arc` and others to be used as method
receivers, turn on `arbitrary_self_types` feature instead.
This feature gate is introduced in 1.23.0. It used to enable both
`Deref` types and raw pointer types to be used as receivers, but the
latter is now split into a different feature gate in Rust 1.83 nightly.
We do not need receivers on raw pointers so this change would not affect
us and usage of `arbitrary_self_types` feature would work for all Rust
versions that we support (>=1.78).
Cc: Adrian Taylor <ade@hohum.me.uk>
Link: https://github.com/rust-lang/rfcs/pull/3519 [1]
Link: https://github.com/rust-lang/rust/issues/44874 [2]
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240915132734.1653004-1-gary@garyguo.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
It is cleaner to have a single inner attribute rather than needing
several hidden lines to wrap the macro invocations.
Thus simplify them.
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-20-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Discuss `#[expect(...)]` in the Lints sections of the coding guidelines
document, which is an upcoming feature in Rust 1.81.0, and explain that
it is generally to be preferred over `allow` unless there is a reason
not to use it (e.g. conditional compilation being involved).
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-19-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In Rust, it is possible to `allow` particular warnings (diagnostics,
lints) locally, making the compiler ignore instances of a given warning
within a given function, module, block, etc.
It is similar to `#pragma GCC diagnostic push` + `ignored` + `pop` in C:
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-function"
static void f(void) {}
#pragma GCC diagnostic pop
But way less verbose:
#[allow(dead_code)]
fn f() {}
By that virtue, it makes it possible to comfortably enable more
diagnostics by default (i.e. outside `W=` levels) that may have some
false positives but that are otherwise quite useful to keep enabled to
catch potential mistakes.
The `#[expect(...)]` attribute [1] takes this further, and makes the
compiler warn if the diagnostic was _not_ produced. For instance, the
following will ensure that, when `f()` is called somewhere, we will have
to remove the attribute:
#[expect(dead_code)]
fn f() {}
If we do not, we get a warning from the compiler:
warning: this lint expectation is unfulfilled
--> x.rs:3:10
|
3 | #[expect(dead_code)]
| ^^^^^^^^^
|
= note: `#[warn(unfulfilled_lint_expectations)]` on by default
This means that `expect`s do not get forgotten when they are not needed.
See the next commit for more details, nuances on its usage and
documentation on the feature.
The attribute requires the `lint_reasons` [2] unstable feature, but it
is becoming stable in 1.81.0 (to be released on 2024-09-05) and it has
already been useful to clean things up in this patch series, finding
cases where the `allow`s should not have been there.
Thus, enable `lint_reasons` and convert some of our `allow`s to `expect`s
where possible.
This feature was also an example of the ongoing collaboration between
Rust and the kernel -- we tested it in the kernel early on and found an
issue that was quickly resolved [3].
Cc: Fridtjof Stoldt <xfrednet@gmail.com>
Cc: Urgau <urgau@numericable.fr>
Link: https://rust-lang.github.io/rfcs/2383-lint-reasons.html#expect-lint-attribute [1]
Link: https://github.com/rust-lang/rust/issues/54503 [2]
Link: https://github.com/rust-lang/rust/issues/114557 [3]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-18-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In the C side, disabling diagnostics locally, i.e. within the source code,
is rare (at least in the kernel). Sometimes warnings are manipulated
via the flags at the translation unit level, but that is about it.
In Rust, it is easier to change locally the "level" of lints
(e.g. allowing them locally). In turn, this means it is easier to
globally enable more lints that may trigger a few false positives here
and there that need to be allowed locally, but that generally can spot
issues or bugs.
Thus document this.
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-17-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In Rust 1.76.0, Clippy added the `check-private-items` lint configuration
option. When turned on (the default is off), it makes several lints
check private items as well.
In our case, it affects two lints we have enabled [1]:
`missing_safety_doc` and `unnecessary_safety_doc`.
It also seems to affect the new `too_long_first_doc_paragraph` lint [2],
even though the documentation does not mention it.
Thus allow the few instances remaining we currently hit and enable
the lint.
Link: https://doc.rust-lang.org/nightly/clippy/lint_configuration.html#check-private-items [1]
Link: https://rust-lang.github.io/rust-clippy/master/index.html#/too_long_first_doc_paragraph [2]
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-16-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Rust 1.82.0's Clippy is introducing [1][2] a new warn-by-default lint,
`too_long_first_doc_paragraph` [3], which is intended to catch titles
of code documentation items that are too long (likely because no title
was provided and the item documentation starts with a paragraph).
This lint does not currently trigger anywhere, but it does detect a couple
cases if checking for private items gets enabled (which we will do in
the next commit):
error: first doc comment paragraph is too long
--> rust/kernel/init/__internal.rs:18:1
|
18 | / /// This is the module-internal type implementing `PinInit` and `Init`. It is unsafe to create this
19 | | /// type, since the closure needs to fulfill the same safety requirement as the
20 | | /// `__pinned_init`/`__init` functions.
| |_
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_long_first_doc_paragraph
= note: `-D clippy::too-long-first-doc-paragraph` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::too_long_first_doc_paragraph)]`
error: first doc comment paragraph is too long
--> rust/kernel/sync/arc/std_vendor.rs:3:1
|
3 | / //! The contents of this file come from the Rust standard library, hosted in
4 | | //! the <https://github.com/rust-lang/rust> repository, licensed under
5 | | //! "Apache-2.0 OR MIT" and adapted for kernel use. For copyright details,
6 | | //! see <https://github.com/rust-lang/rust/blob/master/COPYRIGHT>.
| |_
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_long_first_doc_paragraph
Thus clean those two instances.
In addition, since we have a second `std_vendor.rs` file with a similar
header, do the same there too (even if that one does not trigger the lint,
because it is `doc(hidden)`).
Link: https://github.com/rust-lang/rust/pull/129531 [1]
Link: https://github.com/rust-lang/rust-clippy/pull/12993 [2]
Link: https://rust-lang.github.io/rust-clippy/master/index.html#/too_long_first_doc_paragraph [3]
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-15-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The tag `SAFETY` is used for safety comments, i.e. `// SAFETY`, while a
`Safety` section is used for safety preconditions in code documentation,
i.e. `/// # Safety`.
Fix the three instances recently added in `rbtree` that Clippy would
have normally caught in a public item, so that we can enable checking
of private items in one of the following commits.
Fixes: 98c14e40e0 ("rust: rbtree: add cursor")
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-14-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Back when we used Rust 1.60.0 (before Rust was merged in the kernel),
we added `-Wclippy::dbg_macro` to the compilation flags. This worked
great with our custom `dbg!` macro (vendored from `std`, but slightly
modified to use the kernel printing facilities).
However, in the very next version, 1.61.0, it stopped working [1] since
the lint started to use a Rust diagnostic item rather than a path to find
the `dbg!` macro [1]. This behavior remains until the current nightly
(1.83.0).
Therefore, currently, the `dbg_macro` is not doing anything, which
explains why we can invoke `dbg!` in samples/rust/rust_print.rs`, as well
as why changing the `#[allow()]`s to `#[expect()]`s in `std_vendor.rs`
doctests does not work since they are not fulfilled.
One possible workaround is using `rustc_attrs` like the standard library
does. However, this is intended to be internal, and we just started
supporting several Rust compiler versions, so it is best to avoid it.
Therefore, instead, use `disallowed_macros`. It is a stable lint and
is more flexible (in that we can provide different macros), although
its diagnostic message(s) are not as nice as the specialized one (yet),
and does not allow to set different lint levels per macro/path [2].
In turn, this requires allowing the (intentional) `dbg!` use in the
sample, as one would have expected.
Finally, in a single case, the `allow` is fixed to be an inner attribute,
since otherwise it was not being applied.
Link: https://github.com/rust-lang/rust-clippy/issues/11303 [1]
Link: https://github.com/rust-lang/rust-clippy/issues/11307 [2]
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-13-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Some Clippy lints can be configured/tweaked. We will use these knobs to
our advantage in later commits.
This is done via a configuration file, `.clippy.toml` [1]. The file is
currently unstable. This may be a problem in the future, but we can adapt
as needed. In addition, we proposed adding Clippy to the Rust CI's RFL
job [2], so we should be able to catch issues pre-merge.
Thus introduce the file.
Link: https://doc.rust-lang.org/clippy/configuration.html [1]
Link: https://github.com/rust-lang/rust/pull/128928 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Rust 1.58.0 (before Rust was merged into the kernel) made Clippy's
`non_send_fields_in_send_ty` lint part of the `suspicious` lint group for
a brief window of time [1] until the minor version 1.58.1 got released
a week after, where the lint was moved back to `nursery`.
By that time, we had already upgraded to that Rust version, and thus we
had `allow`ed the lint here for `CondVar`.
Nowadays, Clippy's `non_send_fields_in_send_ty` would still trigger here
if it were enabled.
Moreover, if enabled, `Lock<T, B>` and `Task` would also require an
`allow`. Therefore, it does not seem like someone is actually enabling it
(in, e.g., a custom flags build).
Finally, the lint does not appear to have had major improvements since
then [2].
Thus remove the `allow` since it is unneeded.
Link: https://github.com/rust-lang/rust/blob/master/RELEASES.md#version-1581-2022-01-20 [1]
Link: https://github.com/rust-lang/rust-clippy/issues/8045 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-11-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
These few cases, unlike others in the same file, did not need the `allow`.
Thus clean them up.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-10-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In Rust 1.71.0, `rustdoc` added the `unescaped_backticks` lint, which
detects what are typically typos in Markdown formatting regarding inline
code [1], e.g. from the Rust standard library:
/// ... to `deref`/`deref_mut`` must ...
/// ... use [`from_mut`]`. Specifically, ...
It does not seem to have almost any false positives, from the experience
of enabling it in the Rust standard library [2], which will be checked
starting with Rust 1.82.0. The maintainers also confirmed it is ready
to be used.
Thus enable it.
Link: https://doc.rust-lang.org/rustdoc/lints.html#unescaped_backticks [1]
Link: https://github.com/rust-lang/rust/pull/128307 [2]
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-9-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In Rust 1.73.0, Clippy introduced the `ignored_unit_patterns` lint [1]:
> Matching with `()` explicitly instead of `_` outlines the fact that
> the pattern contains no data. Also it would detect a type change
> that `_` would ignore.
There is only a single case that requires a change:
error: matching over `()` is more explicit
--> rust/kernel/types.rs:176:45
|
176 | ScopeGuard::new_with_data((), move |_| cleanup())
| ^ help: use `()` instead of `_`: `()`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#ignored_unit_patterns
= note: requested on the command line with `-D clippy::ignored-unit-patterns`
Thus clean it up and enable the lint -- no functional change intended.
Link: https://rust-lang.github.io/rust-clippy/master/index.html#/ignored_unit_patterns [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-8-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In Rust 1.67.0, Clippy added the `unnecessary_safety_doc` lint [1],
which is similar to `unnecessary_safety_comment`, but for `# Safety`
sections, i.e. safety preconditions in the documentation.
This is something that should not happen with our coding guidelines in
mind. Thus enable the lint to have it machine-checked.
Link: https://rust-lang.github.io/rust-clippy/master/index.html#/unnecessary_safety_doc [1]
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-7-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In Rust 1.67.0, Clippy added the `unnecessary_safety_comment` lint [1],
which is the "inverse" of `undocumented_unsafe_blocks`: it finds places
where safe code has a `// SAFETY` comment attached.
The lint currently finds 3 places where we had such mistakes, thus it
seems already quite useful.
Thus clean those and enable it.
Link: https://rust-lang.github.io/rust-clippy/master/index.html#/unnecessary_safety_comment [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-6-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Checking that we are not missing any `// SAFETY` comments in our `unsafe`
blocks is something we have wanted to do for a long time, as well as
cleaning up the remaining cases that were not documented [1].
Back when Rust for Linux started, this was something that could have
been done via a script, like Rust's `tidy`. Soon after, in Rust 1.58.0,
Clippy implemented the `undocumented_unsafe_blocks` lint [2].
Even though the lint has a few false positives, e.g. in some cases where
attributes appear between the comment and the `unsafe` block [3], there
are workarounds and the lint seems quite usable already.
Thus enable the lint now.
We still have a few cases to clean up, so just allow those for the moment
by writing a `TODO` comment -- some of those may be good candidates for
new contributors.
Link: https://github.com/Rust-for-Linux/linux/issues/351 [1]
Link: https://rust-lang.github.io/rust-clippy/master/#/undocumented_unsafe_blocks [2]
Link: https://github.com/rust-lang/rust-clippy/issues/13189 [3]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-5-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Rt722, rt721 and rt712 codecs are quite similar. Refactor the existing
spk_rtd_init() to support Realtek common multifunction SDCA codecs.
Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:
This patch series consists of smatch error fixes and code improvements
related to amd soundwire generic machine driver.
Vijendar Mukunda (3):
ASoC: amd: acp: fix for inconsistent indenting
ASoC: amd: acp: fix for cpu dai index logic
ASoC: amd: acp: refactor sof_card_dai_links_create() function
sound/soc/amd/acp/acp-sdw-sof-mach.c | 47 +++++++++++-----------------
1 file changed, 18 insertions(+), 29 deletions(-)
--
2.34.1
Add new PCI ID for Device 18h and Function 4.
Signed-off-by: Richard Gong <richard.gong@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/r/20240913162903.649519-1-richard.gong@amd.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Since, two suspend-resume cycles are required to enter hibernate and,
since we only need to enable idle optimizations in the first cycle
(which is pretty much equivalent to s2idle). We can check in_s0ix, to
prevent the system from entering idle optimizations before it actually
enters hibernate (from display's perspective). Also, call
dc_set_power_state() before dc_allow_idle_optimizations(), since it's
safer to do so because dc_set_power_state() writes to DMUB.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2fe79508d9)
Cc: stable@vger.kernel.org # 6.10+
[Why]
Since the surface/stream update flags aren't cleared after applying
updates, those same updates may be applied again in a future call to
update surfaces/streams for surfaces/streams that aren't actually part
of that update (i.e. applying an update for one surface/stream can
trigger unintended programming on a different surface/stream).
For example, when an update results in a call to
program_front_end_for_ctx, that function may call program_pipe on all
pipes. If there are surface update flags that were never cleared on the
surface some pipe is attached to, then the same update will be
programmed again.
[How]
Clear the surface and stream update flags after applying the updates.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3441
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3616
Cc: Melissa Wen <mwen@igalia.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7671f62c10)
Cc: stable@vger.kernel.org
Partially revert
commit 0ca9f757a0 ("drm/amd/pm: powerplay: Add `__counted_by` attribute for flexible arrays")
The count attribute for these arrays does not get set until
after the arrays are allocated and populated leading to false
UBSAN warnings.
Fixes: 0ca9f757a0 ("drm/amd/pm: powerplay: Add `__counted_by` attribute for flexible arrays")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3662
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8a5ae927b6)
Cc: stable@vger.kernel.org
The patch is to solve null dereference in 'aux.dev', which is
introduced in recent radeon rework. By having 'late_register',
the connector should be registered after 'drm_dev_register'
automatically, where in before it is the opposite.
Fixes: 90985660ba ("drm/radeon: remove load callback from kms_driver")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3665
Tested-by: Hans de Goede <hdegoede@redhat.com>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Wu Hoi Pok <wuhoipok@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b4c1ad70e2)
Only creating a new reference for each process instead of each VM.
Fixes: 9a1c1339ab ("drm/amdkfd: Run restore_workers on freezable WQs")
Suggested-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5fa4362894)
Cc: stable@vger.kernel.org
Partially revert
commit 0ca9f757a0 ("drm/amd/pm: powerplay: Add `__counted_by` attribute for flexible arrays")
The count attribute for these arrays does not get set until
after the arrays are allocated and populated leading to false
UBSAN warnings.
Fixes: 0ca9f757a0 ("drm/amd/pm: powerplay: Add `__counted_by` attribute for flexible arrays")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3662
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
