Edward Cree says:
====================
sfc: per-queue stats
This series implements the netdev_stat_ops interface for per-queue
statistics in the sfc driver, partly using existing counters that
were originally added for ethtool -S output.
Changed in v4:
* remove RFC tags
Changed in v3:
* make TX stats count completions rather than enqueues
* add new patch #4 to account for XDP TX separately from netdev
traffic and include it in base_stats
* move the tx_queue->old_* members out of the fastpath cachelines
* note on patch #6 that our hw_gso stats still count enqueues
* RFC since net-next is closed right now
Changed in v2:
* exclude (dedicated) XDP TXQ stats from per-queue TX stats
* explain patch #3 better
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
While this does add overhead to the fast path, it should be minimal
as the cacheline should already be held for write from updating the
queue's rx_packets stat.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use our existing TSO stats, which count enqueued TSO TXes.
Users may expect them to count completions, as tx-packets and
tx-bytes do; however, these are the counters we have, and the
qstats documentation doesn't actually specify.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we handle a TX completion for an XDP packet, it is not counted
in the per-TXQ netdev stats. Record it in new internal counters,
and include those in the device-wide total in efx_get_base_stats().
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous patch changed when we increment the RX queue's rx_packets
counter, to match the semantics of netdev per-queue stats. The
differences between the old and new counts are scatter errors (which
produce a WARN_ON) and this counter, which is incremented by
efx_rx_packet__check_len() when an RX packet (which was placed in a
single buffer by SG, i.e. n_frags == 1) has a length (from the RX
event) which is too long to fit in the RX buffer. If this occurs, we
drop the packet and fire a ratelimited netif_err().
The counter previously was not reported anywhere; add it to ethtool -S
output to ensure users still have this information.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just RX and TX packet counts and TX bytes for now. We do not
have per-queue RX byte counts, which causes us to fail
stats.pkt_byte_sum selftest with "Drivers should always report
basic keys" error.
Per-queue counts are since the last time the queue was inited
(typically by efx_start_datapath(), on ifup or reconfiguration);
device-wide total (efx_get_base_stats()) is since driver probe.
This is not the same lifetime as rtnl_link_stats64, which uses
firmware stats which count since FW (re)booted; this can cause a
"Qstats are lower" or "RTNL stats are lower" failure in
stats.pkt_byte_sum selftest.
Move the increment of rx_queue->rx_packets to match the semantics
specified for netdev per-queue stats, i.e. just before handing
the packet to XDP (if present) or the netstack (through GRO).
This will affect the existing ethtool -S output which also
reports these counters.
XDP TX packets are not yet counted into base_stats.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The n_rx_tobe_disc and n_rx_mcast_mismatch counters are a legacy
from farch, and are never written in EF10 or EF100 code. Remove
them from the struct and from ethtool -S output, saving a bit of
memory and avoiding user confusion.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The veml6035 is an ALS that shares most of its functionality with the
veml6030, which allows for some code recycling.
Some chip-specific properties differ and dedicated functions to get and
set the sensor gain as well as its initialization are required.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241001-veml6035-v3-9-d789f6ff147c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The veml6035 is a similar ambient light sensor to the veml6030, and
from the bindings point of view, it shares the same properties. Its
only difference in that respect is a different I2C address.
Estend the existing bindings to support the veml6035 ALS.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241001-veml6035-v3-8-d789f6ff147c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move devm_add_action_or_reset() with a device shut down action to the
hardware initialization function to ensure that any error path after
powering on the device leads to a power off. Add struct device *dev
to the argument list to clarify the device the action is registered
against, and use it wherever &client->dev was used.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241001-veml6035-v3-7-d789f6ff147c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The resolution of the WHITE channel is not provided by the manufacturer,
neither in the datasheet nor in the application note (even their
proprietary application only processes the ALS channel, giving raw
values for WHITE).
The current implementation assumes that both resolutions are identical,
which is extremely unlikely, especially for photodiodes with different
spectral responses.
Drop the processed information as it is meaningless.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241001-veml6035-v3-6-d789f6ff147c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Drop custom attributes by using the standard read_avail() callback to
read scale and integration time. When at it, add the integration time
and scale attributes fro the WHITE channel, as they modify its value as
well. To avoid breaking the current ABI, these attributes must be kept
as separate for both channels even though they are shared under the
hood.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241001-veml6035-v3-5-d789f6ff147c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the device managed function from the regulator API to get and enable
a regulator powering the device.
Use "vdd" as the ID to account for the provided name in the datasheet.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241001-veml6035-v3-4-d789f6ff147c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add vdd-supply to account for the sensor's power source.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241001-veml6035-v3-3-d789f6ff147c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the more convenient dev_err_probe() to get rid of the dev_err() +
return sequence in the probe error paths.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241001-veml6035-v3-2-d789f6ff147c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The veml6030 requires a delay of 4 ms after activating the sensor. That
is done correctly during the hw initialization, but it's missing after
resuming.
Move the delay to the power on function to make sure that it is always
observerd. When at it, use fsleep() instead of usleep_range() as such a
narrow range is not required.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241001-veml6035-v3-1-d789f6ff147c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If multishot gets disabled, and hence the request will get terminated
rather than persist for more iterations, then posting the CQE with the
right cflags is still important. Most notably, the buffer reference
needs to be included.
Refactor the return of __io_read() a bit, so that the provided buffer
is always put correctly, and hence returned to the application.
Reported-by: Sharon Rosner <Sharon Rosner>
Link: https://github.com/axboe/liburing/issues/1257
Cc: stable@vger.kernel.org
Fixes: 2a975d426c ("io_uring/rw: don't allow multishot reads without NOWAIT support")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The adc values coming directly from the sensor in the BM{E,P}{2,3}xx
sensors are unsigned values so treat them as such.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240930202353.38203-2-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
After contributing the driver, add myself as the maintainer for the
GE HealthCare PCM ADC IIO driver.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Tested-by: Ian Ray <ian.ray@gehealthcare.com>
Link: https://patch.msgid.link/20241003114641.672086-5-herve.codina@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The GE HealthCare PMC Analog to Digital Converter (ADC) is a 16-Channel
(voltage and current), 16-Bit ADC with an I2C Interface.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Tested-by: Ian Ray <ian.ray@gehealthcare.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241003114641.672086-4-herve.codina@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The GE HealthCare PMC Analog to Digital Converter (ADC) is a 16-Channel
(voltage and current), 16-Bit ADC with an I2C Interface.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Tested-by: Ian Ray <ian.ray@gehealthcare.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241003114641.672086-3-herve.codina@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Both xe_memirq_{source,status}_ptr functions are now strictly for
obtaining an address of the memory based interrupt report pages
used by the HW engines. When initializing the GuC that does not
require special per instance page preparation, we don't need to
abuse these public functions and pass a NULL instead of valid hwe
pointer. Also, without further fixes, this actually may lead to
NPD crash once the hw_reports_to_instance_zero() will be true.
Add internal helpers that will provide report page addresses based
solely on the instance number, which will be always 0 for both GuCs.
Fixes: ef6103d20f ("drm/xe: memirq infra changes for MSI-X")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Ilia Levi <ilia.levi@intel.com>
Reviewed-by: Ilia Levi <ilia.levi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240925084445.1495-1-michal.wajdeczko@intel.com
x86_android_tablet_remove() frees the pdevs[] array, so it should not
be used after calling x86_android_tablet_remove().
When platform_device_register() fails, store the pdevs[x] PTR_ERR() value
into the local ret variable before calling x86_android_tablet_remove()
to avoid using pdevs[] after it has been freed.
Fixes: 5eba014120 ("platform/x86: x86-android-tablets: Add support for instantiating platform-devs")
Fixes: e2200d3f26 ("platform/x86: x86-android-tablets: Add gpio_keys support to x86_android_tablet_init()")
Cc: stable@vger.kernel.org
Reported-by: Aleksandr Burakov <a.burakov@rosalinux.ru>
Closes: https://lore.kernel.org/platform-driver-x86/20240917120458.7300-1-a.burakov@rosalinux.ru/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241005130545.64136-1-hdegoede@redhat.com
The WMI driver core now passes the WMI event data to legacy notify
handlers, so WMI devices sharing notification IDs are now being
handled properly.
Fixes: e04e2b760d ("platform/x86: wmi: Pass event data directly to legacy notify handlers")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241005213825.701887-1-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Alienware supports firmware-attributes and has its own OEM string.
Signed-off-by: Crag Wang <crag_wang@dell.com>
Link: https://lore.kernel.org/r/20241004152826.93992-1-crag_wang@dell.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
There have been multiple reports that the ACPI PM Timer disabling is
causing Sky and Kaby Lake systems to hang on all suspend (s2idle, s3,
hibernate) methods.
Remove the acpi_pm_tmr_ctl_offset and acpi_pm_tmr_disable_bit settings from
spt_reg_map to disable the ACPI PM Timer disabling on Sky and Kaby Lake to
fix the hang on suspend.
Fixes: e86c8186d0 ("platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/linux-pm/18784f62-91ff-4d88-9621-6c88eb0af2b5@molgen.mpg.de/
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219346
Cc: Marek Maslanka <mmaslanka@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Todd Brandt <todd.e.brandt@intel.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360/0596KF
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20241003202614.17181-2-hdegoede@redhat.com
If the battery hook encounters a unsupported battery, it will
return an error. This in turn will cause the battery driver to
automatically unregister the battery hook.
On machines with multiple batteries however, this will prevent
the battery hook from handling the primary battery, since it will
always get unregistered upon encountering one of the unsupported
batteries.
Fix this by simply ignoring unsupported batteries.
Reviewed-by: Pali Rohár <pali@kernel.org>
Fixes: ab58016c68 ("platform/x86:dell-laptop: Add knobs to change battery charge settings")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241001212835.341788-4-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Ashok is no longer with Intel and his e-mail address will start bouncing
soon. Update his email address to the new one he provided to ensure
correct contact details in the MAINTAINERS file.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20241001170808.203970-1-jithu.joseph@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
-----BEGIN PGP SIGNATURE-----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=Rtrz
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.12, take #1
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
Guard them with CONFIG_KVM_X86_COMMON rather than the two vendor modules.
In practice this has no functional change, because CONFIG_KVM_X86_COMMON
is set if and only if at least one vendor-specific module is being built.
However, it is cleaner to specify CONFIG_KVM_X86_COMMON for functions that
are used in kvm.ko.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 590b09b1d8 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Fixes: 6d55a94222 ("x86/reboot: Unconditionally define cpu_emergency_virt_cb typedef")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm.ko is nothing but library code shared by kvm-intel.ko and kvm-amd.ko.
It provides no functionality on its own and it is unnecessary unless one
of the vendor-specific module is compiled. In particular, /dev/kvm is
not created until one of kvm-intel.ko or kvm-amd.ko is loaded.
Use CONFIG_KVM to decide if it is built-in or a module, but use the
vendor-specific modules for the actual decision on whether to build it.
This also fixes a build failure when CONFIG_KVM_INTEL and CONFIG_KVM_AMD
are both disabled. The cpu_emergency_register_virt_callback() function
is called from kvm.ko, but it is only defined if at least one of
CONFIG_KVM_INTEL and CONFIG_KVM_AMD is provided.
Fixes: 590b09b1d8 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
BCH_INODE_i_size_dirty dates from before we had logged operations for
truncate (as well as finsert) - it hasn't been needed since before
bcachefs was mainlined.
BCH_INODE_i_sectors_dirty hasn't been needed since we started always
updating i_sectors transactionally - it's been unused for even longer.
BCH_INODE_backptr_untrusted also hasn't been used since prior to
mainlining; when unlinking a hardling, we zero out the backpointer
fields if they're for the dirent being removed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When we find an unreachable inode, we now reattach it in the oldest
version that needs to be reattached (thus avoiding redundant work
reattaching every single version), and we now fix up inode -> dirent
backpointers in newer versions as needed - or white out the reattaching
dirent in newer versions, if the newer version isn't supposed to be
reattached.
This results in the second verify fsck now passing cleanly after
repairing on a user-provided filesystem image with thousands of
different snapshots.
Reported-by: Christopher Snowhill <chris@kode54.net>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
With inode backpointers, we can write a very simple
check_unreachable_inodes() pass that only looks for non-unlinked inodes
that are missing backpointers, and reattaches them.
This simplifies check_directory_structure() so that it's now only
checking for directory structure loops,
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Configure the ADC and thermal zone for the thermistor next to the
UFS+RAM chip which is connected to GPIO_12 of PM7250B. It is used to
measure the temperature of that area of the PCB.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20241002-fp5-ufs-therm-v1-1-1d2d8c1f08b5@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This loop is supposed to break if the frequency returned from
clk_round_rate() is the same as on the previous iteration. However,
that check doesn't make sense on the first iteration through the loop.
It leads to reading before the start of these->clk_perf_tbl[] array.
Fixes: eddac5af06 ("soc: qcom: Add GENI based QUP Wrapper driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/8cd12678-f44a-4b16-a579-c8f11175ee8c@stanley.mountain
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
