Using guard notation makes the code more compact and error handling
more robust by ensuring that serio ports are resumed in all code paths
when control leaves critical section.
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20240905041732.2034348-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that serio ports are resumed in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
serio_pause_rx() and serio_continue_rx() are usually used together to
temporarily stop receiving interrupts/data for a given serio port.
Define "serio_pause_rx" guard for this so that the port is always
resumed once critical section is over.
Example:
scoped_guard(serio_pause_rx, elo->serio) {
elo->expected_packet = toupper(packet[0]);
init_completion(&elo->cmd_done);
}
Link: https://lore.kernel.org/r/20240905041732.2034348-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add manufacturer ID 0xc2 at the end of ID table to allow manufacturer
fixups to be applied for any Macronix flash. This spares us of adding
new flash entries for flashes that can be initialized solely based on
the SFDP data, but still need the manufacturer hooks to set parameters
that can't be discovered at SFDP parsing time.
The ID is added in order to set the octal DTR methods. SFDP defines a
"Command Sequences to Change to Octal DDR (8D-8D-8D) Mode" which can
enable the octal DTR mode. Until that is parsed and used, use the
local defined method.
Suggested-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: JaimeLiao <jaimeliao@mxic.com.tw>
Signed-off-by: AlvinZhou <alvinzhou@mxic.com.tw>
Link: https://lore.kernel.org/r/20240926141956.2386374-7-alvinzhou.tw@gmail.com
[ta: update commit message and comment in the code]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
As of commit 2edc6a75f2 ("drm/i915: switch intel_wakeref_t underlying
type to struct ref_tracker *") we gained quite a few sparse warnings
about "Using plain integer as NULL pointer" for using 0 to initialize
wakeref_t. Switch to NULL everywhere.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241002181655.582597-1-jani.nikula@intel.com
Matthew Wilcox (Oracle) <willy@infradead.org> says:
The first four patches continue the work begun in 02e1960aaf to make
the mappedtodisk/owner_2 flag available to filesystems which don't use
buffer heads. The last two remove uses of Private2 (we're achingly close
to being rid of it entirely, but that doesn't seem like it'll land this
merge window).
* patches from https://lore.kernel.org/r/20241002040111.1023018-1-willy@infradead.org:
migrate: Remove references to Private2
ceph: Remove call to PagePrivate2()
btrfs: Switch from using the private_2 flag to owner_2
mm: Remove PageMappedToDisk
nilfs2: Convert nilfs_copy_buffer() to use folios
fs: Move clearing of mappedtodisk to buffer.c
Link: https://lore.kernel.org/r/20241002040111.1023018-1-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Use the folio that we already have to call folio_test_private_2()
instead. This is the last call to PagePrivate2(), so replace its
PAGEFLAG() definition with FOLIO_FLAG().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20241002040111.1023018-6-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
We are close to removing the private_2 flag, so switch btrfs to using
owner_2 for its ordered flag. This is mostly used by buffer head
filesystems, so btrfs can use it because it doesn't use buffer heads.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20241002040111.1023018-5-willy@infradead.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
All callers have now been converted to the folio APIs, so remove
the page API for this flag.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20241002040111.1023018-4-willy@infradead.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The mappedtodisk flag is only meaningful for buffer head based
filesystems. It should not be cleared for other filesystems. This allows
us to reuse the mappedtodisk flag to have other meanings in filesystems
that do not use buffer heads.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20241002040111.1023018-2-willy@infradead.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add hw monitor volume control for POD HD500X. This is done adding
LINE6_CAP_HWMON_CTL to the capabilities
Signed-off-by: Hans P. Moller <hmoller@uc.cl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241003232828.5819-1-hmoller@uc.cl
Add fixup_dev_quirk vops in QCOM UFS platforms and provide an initial
vendor-specific device quirk table to add UFS device specific quirks which
are enabled only for specified UFS devices.
- Add DELAY_BEFORE_LPM quirk for Skhynix UFS devices to introduce a delay
before VCC is powered off in QCOM platforms.
- Add DELAY_AFTER_LPM quirk for Toshiba UFS devices to introduce a delay
after the VCC power rail is turned off in QCOM platforms.
- Move UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE quirk from
ufs_qcom_apply_dev_quirks to ufs_qcom_dev_fixups.
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Link: https://lore.kernel.org/r/20240903131546.1141-1-quic_mapa@quicinc.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The only input fc_rport_set_marginal_state() currently accepts is
"Marginal" when port_state is "Online", and "Online" when the port_state
is "Marginal". It should also allow setting port_state to its current
state, either "Marginal or "Online".
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Link: https://lore.kernel.org/r/20240917230643.966768-1-bmarzins@redhat.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch introduces a previously missing step: zeroing the 'utp_upiu_req'
structure at the beginning of each upiu transaction. This ensures that the
upiu request fields are properly initialized, preventing potential issues
caused by residual data from previous commands.
While at it, re-use some of the common initializations for query and
command upiu.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240921062306.56019-1-avri.altman@wdc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_wait_for_register() practically does just that - replace with
read_poll_timeout.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240919112442.48491-1-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Except for preventing build errors, there shouldn't be any conditionals in
kernel drivers on __GENKSYMS__. Hence remove an #ifndef __GENKSYMS__ / #endif
pair from the MPT Fusion driver.
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: MPT-FusionLinux.pdl@broadcom.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240930201347.1837690-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
'aic7770_find_device()' has been unused since 2005's
commit dedd831081 ("[SCSI] aic7xxx: remove Linux 2.4 ifdefs")
Remove it and the associated constant. (Whether anyone still has one of
these cards in use is another question, I've just build tested this).
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240913170116.250996-1-linux@treblig.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
aac_check_health() has been unused since commit
9473ddb2b0 ("scsi: aacraid: Use correct function to get ctrl health")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240920202304.333108-1-linux@treblig.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A regression was introduced with commit dbb2da557a ("scsi: wd33c93:
Move the SCSI pointer to private command data") which results in an oops
in wd33c93_intr(). That commit added the scsi_pointer variable and
initialized it from hostdata->connected. However, during selection,
hostdata->connected is not yet valid. Fix this by getting the current
scsi_pointer from hostdata->selecting.
Cc: Daniel Palmer <daniel@0x0f.com>
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: stable@kernel.org
Fixes: dbb2da557a ("scsi: wd33c93: Move the SCSI pointer to private command data")
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Co-developed-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/09e11a0a54e6aa2a88bd214526d305aaf018f523.1727926187.git.fthain@linux-m68k.org
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After commit 379a58caa1 ("scsi: fnic: Move fnic_fnic_flush_tx() to a
work queue"), it can happen that a work item is sent to an uninitialized
work queue. This may has the effect that the item being queued is never
actually queued, and any further actions depending on it will not
proceed.
The following warning is observed while the fnic driver is loaded:
kernel: WARNING: CPU: 11 PID: 0 at ../kernel/workqueue.c:1524 __queue_work+0x373/0x410
kernel: <IRQ>
kernel: queue_work_on+0x3a/0x50
kernel: fnic_wq_copy_cmpl_handler+0x54a/0x730 [fnic 62fbff0c42e7fb825c60a55cde2fb91facb2ed24]
kernel: fnic_isr_msix_wq_copy+0x2d/0x60 [fnic 62fbff0c42e7fb825c60a55cde2fb91facb2ed24]
kernel: __handle_irq_event_percpu+0x36/0x1a0
kernel: handle_irq_event_percpu+0x30/0x70
kernel: handle_irq_event+0x34/0x60
kernel: handle_edge_irq+0x7e/0x1a0
kernel: __common_interrupt+0x3b/0xb0
kernel: common_interrupt+0x58/0xa0
kernel: </IRQ>
It has been observed that this may break the rediscovery of Fibre
Channel devices after a temporary fabric failure.
This patch fixes it by moving the work queue initialization out of
an if block in fnic_probe().
Signed-off-by: Martin Wilck <mwilck@suse.com>
Fixes: 379a58caa1 ("scsi: fnic: Move fnic_fnic_flush_tx() to a work queue")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240930133014.71615-1-mwilck@suse.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If container_of() is used correctly, its result is never NULL. Remove the
code that depends on container_of() returning a NULL pointer.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://lore.kernel.org/r/20240921062956.2027563-1-liaochen4@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche <bvanassche@acm.org> says:
Hi Martin,
This patch series includes four patches that modify the UFS driver UIC
code without modifying the behavior of that code.
Please consider this patch series for the next merge window.
Thanks,
Bart.
Link: https://lore.kernel.org/r/20240912223019.3510966-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Simplify __ufshcd_send_uic_cmd() by always initializing the
uic_cmd::done completion. This is fine since the time required to
initialize a completion is small compared to the time required to
process an UIC command.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240912223019.3510966-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In ufshcd_uic_cmd_compl(), there is code that dereferences 'cmd' with
and without checking the 'cmd' pointer. This confuses static source code
analyzers like Coverity and sparse. Since none of the code in
ufshcd_uic_cmd_compl() can do anything useful if 'cmd' is NULL, move the
'cmd' test near the start of this function.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240912223019.3510966-4-bvanassche@acm.org
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce a local variable for the expression hba->active_uic_cmd.
Remove superfluous parentheses. No functionality has been changed.
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240912223019.3510966-3-bvanassche@acm.org
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make the role of the structure members related to UIC command processing
more clear.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240912223019.3510966-2-bvanassche@acm.org
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Document the Universal Flash Storage(UFS) Controller on the Qualcomm
QCS8300 Platform.
Signed-off-by: Xin Liu <quic_liuxin@quicinc.com>
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Link: https://lore.kernel.org/r/20240911-qcs8300_ufs_binding-v2-1-68bb66d48730@quicinc.com
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace manual offset calculations for response_upiu and prd_table in
ufshcd_init_lrb() with pre-calculated offsets already stored in the
utp_transfer_req_desc structure. The pre-calculated offsets are set
differently in ufshcd_host_memory_configure() based on the
UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk, ensuring correct alignment and
access.
Fixes: 26f968d7de ("scsi: ufs: Introduce UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk")
Cc: stable@vger.kernel.org
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240910044543.3812642-1-avri.altman@wdc.com
Acked-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
- Restore pci state on resume (Rodrigo Vivi)
- Fix locking on submission, queue and vm (Matthew Auld, Matthew Brost)
- Fix UAF on queue destruction (Matthew Auld)
- Fix resource release on freq init error path (He Lugang)
- Use rw_semaphore to reduce contention on ASID->VM lookup (Matthew Brost)
- Fix steering for media on Xe2_HPM (Gustavo Sousa)
- Tuning updates to Xe2 (Gustavo Sousa)
- Resume TDR after GT reset to prevent jobs running forever (Matthew Brost)
- Move id allocation to avoid userspace using a guessed number
to trigger UAF (Matthew Auld, Matthew Brost)
- Fix OA stream close preventing pbatch buffers to complete (José)
- Fix NPD when migrating memory on LNL (Zhanjun Dong)
- Fix memory leak when aborting binds (Matthew Brost)
-----BEGIN PGP SIGNATURE-----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=FjY1
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-fixes-2024-10-03' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Restore pci state on resume (Rodrigo Vivi)
- Fix locking on submission, queue and vm (Matthew Auld, Matthew Brost)
- Fix UAF on queue destruction (Matthew Auld)
- Fix resource release on freq init error path (He Lugang)
- Use rw_semaphore to reduce contention on ASID->VM lookup (Matthew Brost)
- Fix steering for media on Xe2_HPM (Gustavo Sousa)
- Tuning updates to Xe2 (Gustavo Sousa)
- Resume TDR after GT reset to prevent jobs running forever (Matthew Brost)
- Move id allocation to avoid userspace using a guessed number
to trigger UAF (Matthew Auld, Matthew Brost)
- Fix OA stream close preventing pbatch buffers to complete (José)
- Fix NPD when migrating memory on LNL (Zhanjun Dong)
- Fix memory leak when aborting binds (Matthew Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2fiv63yanlal5mpw3mxtotte6yvkvtex74c7mkjxca4bazlyja@o4iejcfragxy
Production BPF programs are increasing in number of instructions and states
to the point, where optimising verification process for them is necessary
to avoid running into instruction limit. Authors of those BPF programs
need to analyze verifier output, for example, collecting the most
frequent source code lines to understand which part of the program has
the biggest verification cost.
This patch introduces `--top-src-lines` flag in veristat.
`--top-src-lines=N` makes veristat output N the most popular sorce code
lines, parsed from verification log.
An example of output:
```
sudo ./veristat --top-src-lines=2 bpf_flow.bpf.o
Processing 'bpf_flow.bpf.o'...
Top source lines (_dissect):
4: (bpf_helpers.h:161) asm volatile("r1 = %[ctx]\n\t"
4: (bpf_flow.c:155) if (iph && iph->ihl == 5 &&
...
```
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240930231522.58650-1-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Eduard Zingerman says:
====================
'bpf_fastcall' attribute in vmlinux.h and bpf_helper_defs.h
The goal of this patch-set is to reflect attribute bpf_fastcall
for supported helpers and kfuncs in generated header files.
For helpers this requires a tweak for scripts/bpf_doc.py and an update
to uapi/linux/bpf.h doc-comment.
For kfuncs this requires:
- introduction of a new KF_FASTCALL flag;
- modification to pahole to read kfunc flags and generate
DECL_TAG "bpf_fastcall" for marked kfuncs;
- modification to bpftool to scan for DECL_TAG "bpf_fastcall"
presence.
In both cases the following helper macro is defined in the generated
header:
#ifndef __bpf_fastcall
#if __has_attribute(bpf_fastcall)
#define __bpf_fastcall __attribute__((bpf_fastcall))
#else
#define __bpf_fastcall
#endif
#endif
And is used to mark appropriate function prototypes. More information
about bpf_fastcall attribute could be found in [1] and [2].
Modifications to pahole are submitted separately.
[1] LLVM source tree commit:
64e464349bfc ("[BPF] introduce __attribute__((bpf_fastcall))")
[2] Linux kernel tree commit (note: feature was renamed from
no_caller_saved_registers to bpf_fastcall after this commit):
52839f31ce ("Merge branch 'no_caller_saved_registers-attribute-for-helper-calls'")
====================
Link: https://lore.kernel.org/r/20240916091712.2929279-1-eddyz87@gmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In order to allow pahole add btf_decl_tag("bpf_fastcall") for kfuncs
supporting bpf_fastcall, mark such functions with KF_FASTCALL in
id_set8 objects.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240916091712.2929279-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since [1] kernel supports __bpf_fastcall attribute for helper function
bpf_get_smp_processor_id(). Update uapi definition for this helper in
order to have this attribute in the generated bpf_helper_defs.h
[1] commit 91b7fbf393 ("bpf, x86, riscv, arm: no_caller_saved_registers for bpf_get_smp_processor_id()")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240916091712.2929279-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow a new optional 'Attributes' section to be specified for helper
functions description, e.g.:
* u32 bpf_get_smp_processor_id(void)
* ...
* Return
* ...
* Attributes
* __bpf_fastcall
*
Generated header for the example above:
#ifndef __bpf_fastcall
#if __has_attribute(__bpf_fastcall)
#define __bpf_fastcall __attribute__((bpf_fastcall))
#else
#define __bpf_fastcall
#endif
#endif
...
__bpf_fastcall
static __u32 (* const bpf_get_smp_processor_id)(void) = (void *) 8;
The following rules apply:
- when present, section must follow 'Return' section;
- attribute names are specified on the line following 'Attribute'
keyword;
- attribute names are separated by spaces;
- section ends with an "empty" line (" *\n").
Valid attribute names are recorded in the ATTRS map.
ATTRS maps shortcut attribute name to correct C syntax.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240916091712.2929279-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tony Ambardar says:
====================
libbpf, selftests/bpf: Support cross-endian usage
Hello all,
This patch series targets a long-standing BPF usability issue - the lack
of general cross-compilation support - by enabling cross-endian usage of
libbpf and bpftool, as well as supporting cross-endian build targets for
selftests/bpf.
Benefits include improved BPF development and testing for embedded systems
based on e.g. big-endian MIPS, more build options e.g for s390x systems,
and better accessibility to the very latest test tools e.g. 'test_progs'.
The series touches many functional areas: BTF.ext handling; object access,
introspection, and linking; generation of normal and "light" skeletons.
Initial development and testing used mips64, since this arch makes
switching the build byte-order trivial and is thus very handy for A/B
testing. However, it lacks some key features (bpf2bpf call, kfuncs, etc)
making for poor selftests/bpf coverage.
Final testing takes the kernel and selftests/bpf cross-built from x86_64
to s390x, and runs the result under QEMU/s390x. That same configuration
could also be used on kernel-patches/bpf CI for regression testing endian
support or perhaps load-sharing s390x builds across x86_64 systems.
This thread includes some background regarding testing on QEMU/s390x and
the generally favourable results:
https://lore.kernel.org/bpf/ZsEcsaa3juxxQBUf@kodidev-ubuntu/
Earlier versions and related discussion of the series are here:
v1: https://lore.kernel.org/bpf/cover.1724216108.git.tony.ambardar@gmail.com/
v2: https://lore.kernel.org/bpf/cover.1724313164.git.tony.ambardar@gmail.com/
v3: https://lore.kernel.org/bpf/cover.1724843049.git.tony.ambardar@gmail.com/
v4: https://lore.kernel.org/bpf/cover.1724976539.git.tony.ambardar@gmail.com/
v5: https://lore.kernel.org/bpf/cover.1725347944.git.tony.ambardar@gmail.com/
Feedback and suggestions are welcome!
Best regards,
Tony
Changelog:
---------
v5 -> v6: (comments from Andrii, Alexei, Eduard)
- clarify info_blob_bswap() by making it explicitly conditional on
non-native target endianness, and merge a pair of related debug
statements
- reformat debug statement in bpf_object_bswap_progs() on single line
- update existing info setup functions to validate and parse info
section metadata prior to any byte-swapping, and drop earlier added
validation checks
- rework cross-endian BTF.ext handling by using callback functions to
byte-swap different types of info records, but after initial parsing
- fix a bug always outputting BTF.ext raw data in native endianness
- include v5 "Acked-by:" from Alexei, Yonghong
v4 -> v5: (feedback from Andrii and Eduard)
- add separate functions to byte-swap info metadata and records, and
ensure ordering so record bswaps occur when metadata is native endian
- use new and existing macros to iterate through info sections/records,
and check embedded record sizes match that of info structs used
- drop use of <cough> evil callbacks
- move setting swapped_endian flag to after byte-swapping functions are
called during initialization, allowing funcs to infer endianness and
drop a 'bool native' call parameter
- simplify byte-swapping macro used to generate light skeleton, and use
internal lib funcs to swap info records instead of assuming all __u32
- change info bswap library funcs to void return
- rework/consolidate new debug statements to reduce their number
- remove some unneeded handling of impossible errors, and drop a safety
check already handled elsewhere
- add and clarify some comments
v3 -> v4:
- fix a use-after-free ELF data-handling error causing rare CI failures
- move bswap functions for func/line/core-relo records to internal header
- use bswap functions also for info blobs in light skeleton
v2 -> v3: (feedback from Andrii)
- improve some log and commit message formatting
- restructure BTF.ext endianness safety checks and byte-swapping
- use BTF.ext info record definitions for swapping, require BTF v1
- follow BTF API implementation more closely for BTF.ext
- explicitly reject loading non-native endianness program into kernel
- simplify linker output byte-order setting
- drop redundant safety checks during linking
- simplify endianness macro and improve blob setup code for light skel
- no unexpected test failures after cross-compiling x86_64 -> s390x
v1 -> v2:
- fixed a light skeleton bug causing test_progs 'map_ptr' failure
- simplified some BTF.ext related endianness logic
- remove an 'inline' usage related to CI checkpatch failure
- improve some formatting noted by checkpatch warnings
- unexpected 'test_progs' failures drop 3 -> 2 (x86_64 to s390x cross)
====================
Link: https://lore.kernel.org/r/cover.1726475448.git.tony.ambardar@gmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When building selftests, the following was seen:
uprobe_multi.c: In function ‘trigger_uprobe’:
uprobe_multi.c:108:40: error: ‘MADV_PAGEOUT’ undeclared (first use in this function)
108 | madvise(addr, page_sz, MADV_PAGEOUT);
| ^~~~~~~~~~~~
uprobe_multi.c:108:40: note: each undeclared identifier is reported only once for each function it appears in
make: *** [Makefile:850: bpf-next/tools/testing/selftests/bpf/uprobe_multi] Error 1
...even with updated UAPI headers. It seems the above value is
defined in UAPI <linux/mman.h> but including that file triggers
other redefinition errors. Simplest solution is to add a
guarded definition, as was done for MADV_POPULATE_READ.
Fixes: 3c217a1820 ("selftests/bpf: add build ID tests")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240926144948.172090-1-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Update Makefile build rules to compile BPF programs with target endianness
rather than host byte-order. With recent changes, this allows building the
full selftests/bpf suite hosted on x86_64 and targeting s390x or mips64eb
for example.
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/880ccc6342cfc4d3c48b44f581e87adfbce2876e.1726475448.git.tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Track target endianness in 'struct bpf_gen' and process in-memory data in
native byte-order, but on finalization convert the embedded loader BPF
insns to target endianness.
The light skeleton also includes a target-accessed data blob which is
heterogeneous and thus difficult to convert to target byte-order on
finalization. Add support functions to convert data to target endianness
as it is added to the blob.
Also add additional debug logging for data blob structure details and
skeleton loading.
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/569562e1d5bf1cce80a1f1a3882461ee2da1ffd5.1726475448.git.tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow static linking object files of either endianness, checking that input
files have consistent byte-order, and setting output endianness from input.
Linking requires in-memory processing of programs, relocations, sections,
etc. in native endianness, and output conversion to target byte-order. This
is enabled by built-in ELF translation and recent BTF/BTF.ext endianness
functions. Further add local functions for swapping byte-order of sections
containing BPF insns.
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/b47ca686d02664843fc99b96262fe3259650bc43.1726475448.git.tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
