The fs_lookup_param did not consider the relative path for block device.
When we mount ext4 with journal_path option using relative path,
param->dirfd was not set which will cause mounting error.
This can be reproduced easily like this:
mke2fs -F -O journal_dev $JOURNAL_DEV -b 4096 100M
mkfs.ext4 -F -J device=$JOURNAL_DEV -b 4096 $FS_DEV
cd /dev; mount -t ext4 -o journal_path=`basename $JOURNAL_DEV` $FS_DEV $MNT
Fixes: 461c3af045 ("ext4: Change handle_mount_opt() to use fs_parameter")
Suggested-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20240925015624.3817878-1-lihongbo22@huawei.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Benjamin Coddington <bcodding@redhat.com> says:
Last year both GFS2 and OCFS2 had some work done to make their locking more
robust when exported over NFS. Unfortunately, part of that work caused both
NLM (for NFS v3 exports) and kNFSD (for NFSv4.1+ exports) to no longer send
lock notifications to clients.
This in itself is not a huge problem because most NFS clients will still
poll the server in order to acquire a conflicted lock, but now that I've
noticed it I can't help but try to fix it because there are big advantages
for setups that might depend on timely lock notifications, and we've
supported that as a feature for a long time.
Its important for NLM and kNFSD that they do not block their kernel threads
inside filesystem's file_lock implementations because that can produce
deadlocks. We used to make sure of this by only trusting that
posix_lock_file() can correctly handle blocking lock calls asynchronously,
so the lock managers would only setup their file_lock requests for async
callbacks if the filesystem did not define its own lock() file operation.
However, when GFS2 and OCFS2 grew the capability to correctly
handle blocking lock requests asynchronously, they started signalling this
behavior with EXPORT_OP_ASYNC_LOCK, and the check for also trusting
posix_lock_file() was inadvertently dropped, so now most filesystems no
longer produce lock notifications when exported over NFS.
I tried to fix this by simply including the old check for lock(), but the
resulting include mess and layering violations was more than I could accept.
There's a much cleaner way presented here using an fop_flag, which while
potentially flag-greedy, greatly simplifies the problem and grooms the
way for future uses by both filesystems and lock managers alike.
* patches from https://lore.kernel.org/r/cover.1726083391.git.bcodding@redhat.com:
exportfs: Remove EXPORT_OP_ASYNC_LOCK
NLM/NFSD: Fix lock notifications for async-capable filesystems
gfs2/ocfs2: set FOP_ASYNC_LOCK
fs: Introduce FOP_ASYNC_LOCK
NFS: trace: show TIMEDOUT instead of 0x6e
nfsd: use system_unbound_wq for nfsd_file_gc_worker()
nfsd: count nfsd_file allocations
nfsd: fix refcount leak when file is unhashed after being found
nfsd: remove unneeded EEXIST error check in nfsd_do_file_acquire
nfsd: add list_head nf_gc to struct nfsd_file
Link: https://lore.kernel.org/r/cover.1726083391.git.bcodding@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
new_dir does *NOT* point into dir_folio - it's an inode, not a pointer
to ufs directory entry.
Fixes: 516b97cf03 "ufs: Convert directory handling to kmap_local"
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Declarations local to arch/*/kernel/*.c are better off *not* in a public
header - arch/parisc/kernel/unaligned.h is just fine for those
bits.
With that done parisc asm/unaligned.h is reduced to include
of asm-generic/unaligned.h and can be removed - unaligned.h is in
mandatory-y in include/asm-generic/Kbuild.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Due to server permission control, the client does not have access to
the shared root directory, but can access subdirectories normally, so
users usually mount the shared subdirectories directly. In this case,
queryfs should use the actual path instead of the root directory to
avoid the call returning an error (EACCES).
Signed-off-by: wangrong <wangrong@uniontech.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
at24.yaml defines the node name for at24 EEPROMs as 'eeprom'.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Schemas for array properties should only have 1 level of array
constraints (e.g. items, maxItems, minItems). Sometimes the old
encoding of all properties into a matrix leaked into the schema, and
didn't matter for validation. Now the inner constraints are just
silently ignored as json-schema array keywords are ignored on scalar
values.
Generally, keep the inner constraints and drop the outer "items". With
gicv3 "mbi-alias" property, it is more appropriately a uint32 or uint64
as it is an address and size depends on "#address-cells".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240925232409.2208515-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The Freescale MU-MSI is an MSI provider, not an interrupt provider, so
drop the "interrupt-controller" property. This fixes dtc "interrupt_provider"
warning.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240925173438.1906339-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Enabling dtc interrupt_provider check reveals the example is missing
the "#interrupt-cells" property as it is a dependency of
"interrupt-controller".
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240925173432.1906168-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The adt7462 supports monitoring and controlling up to
four PWM Fan drive outputs and eight TACH inputs measures.
The adt7462 supports reading a single on chip temperature
sensor and three remote temperature sensors. There are up
to 13 voltage monitoring inputs.
Add device tree bindings for the adt7462 device.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20240923093800.892949-1-chanh@os.amperecomputing.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Currently, the compatible 'elgin,jg10309-01' is documented inside
trivial-devices.yaml, but it does not fit well there as it requires
extra properties such as spi-max-frequency, spi-cpha, and spi-cpol.
This causes the following dt-schema warnings:
make CHECK_DTBS=y rockchip/rv1108-elgin-r1.dtb -j12
DTC [C] arch/arm/boot/dts/rockchip/rv1108-elgin-r1.dtb
rv1108-elgin-r1.dtb:display@0: 'spi-cpha', 'spi-cpol' do not match any of the regexes:
...
Fix this problem by introducing a specific binding for the Elgin
JG10309-01 SPI-controlled display.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240930213238.977833-1-festevam@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
This is an error path so set the error code. Smatch complains about the
current code:
drivers/opp/core.c:2660 dev_pm_opp_set_config()
error: uninitialized symbol 'ret'.
Fixes: e37440e7e2 ("OPP: Call dev_pm_opp_set_opp() for required OPPs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/3f3660af-4ea0-4a89-b3b7-58de7b16d7a5@stanley.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[Why]
Connected with a Thunderbolt monitor and do the suspend and the system
may hang while resume.
The TBT monitor HPD will be triggered during the resume procedure
and call the drm_client_modeset_probe() while
struct drm_connector connector->dev->master is NULL.
It will mess up the pipe topology after resume.
[How]
Skip the TBT monitor HPD during the resume procedure because we
currently will probe the connectors after resume by default.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 453f86a269)
Cc: stable@vger.kernel.org
[Why]
There are more IPS modes other than DMUB_IPS_ENABLE that enables IPS. We
need to enable the hotplug detect idle workqueue for those modes as
well.
[How]
Modify the if condition to initialize the workqueue in all IPS modes
except for DMUB_IPS_DISABLE_ALL.
Fixes: 65444581a4 ("drm/amd/display: Determine IPS mode by ASIC and PMFW versions")
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 181db30bcf)
Cc: stable@vger.kernel.org
[WHY & HOW]
Some eDP panels suffer from flicking when HDR is enabled in KDE. This
quirk works around it by skipping VSC that is incompatible with eDP
panels.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3151
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4d4257280d)
Cc: stable@vger.kernel.org
[why]
set dispclk to 0 cause stability issue.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1c6b16ebf5)
Cc: stable@vger.kernel.org
Existing last step of dsc policy is to restore pbn value under minimum compression
when try to greedily disable dsc for a stream failed to fit in MST bw.
Optimized dsc params result from optimization step is not necessarily the minimum compression,
therefore it is not correct to restore the pbn under minimum compression rate.
Restore the pbn under minimum compression instead of the value from optimized pbn could result
in the dsc params not correct at the modeset where atomic_check failed due to not
enough bw. One or more monitors connected could not light up in such case.
Restore the optimized pbn value, instead of using the pbn value under minimum
compression.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 352c3165d2)
Cc: stable@vger.kernel.org
[WHY & HOW]
Mismatch in DCN35 DML2 cause bw validation failed to acquire unexpected DPP pipe to cause
grey screen and system hang. Remove EnhancedPrefetchScheduleAccelerationFinal value override
to match HW spec.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9dad21f910)
Cc: stable@vger.kernel.org
Starting with upstream Rust commit a5e3a3f9b6bd ("move
`manual_c_str_literals` to complexity"), to be released in Rust 1.83.0
[1], Clippy now warns on `manual_c_str_literals` by default, e.g.:
error: manually constructing a nul-terminated string
--> rust/kernel/kunit.rs:21:13
|
21 | b"\x013%pA\0".as_ptr() as _,
| ^^^^^^^^^^^^^ help: use a `c""` literal: `c"\x013%pA"`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_c_str_literals
= note: `-D clippy::manual-c-str-literals` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::manual_c_str_literals)]`
Apply the suggestion to clean up the warnings.
Link: https://github.com/rust-lang/rust-clippy/pull/13263 [1]
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240927164414.560906-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of post_soft_reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of soft_reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses an omission in the previous patch related to the
cleaner shader support for GFX9 hardware. Specifically, it adds the
necessary deinitialization code for the cleaner shader in the
gfx_v9_0_sw_fini function.
The added line amdgpu_gfx_cleaner_shader_sw_fini(adev); ensures that any
allocated resources for the cleaner shader are freed correctly, avoiding
potential memory leaks and ensuring that the GPU state is clean for the
next initialization sequence.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes: c2e70d307f ("drm/amdgpu/gfx9: Implement cleaner shader support for GFX9 hardware")
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of pre_soft_reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid comparing TOS version on APUs. On APUs driver doesn't take care of
TOS load.
Fixes: 0ff3822613 ("drm/amdgpu: Add interface for TOS reload cases")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Rajneesh Bhardwaj <Rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of check_soft_reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of prepare_suspend.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of late_fini.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
acp_early_init is a dummy function and is not being
used and hence removed.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We start with the function 'atomctrl_calculate_voltage_evv_on_sclk'
which has been unused since 2016's commit
e805ed83ba ("drm/amd/powerplay: delete useless files.")
Remove it.
It was also the last user of the entire fixed point maths library in
ppevvmath.h.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some distributions have been patching amdgpu to enable overdrive by
default which may compromise stability. Furthermore when bug reports
are brought upstream it's not obvious that the system has been tampered
with.
When overdrive is enabled taint the kernel and leave a critical message
in the logs for users so that it's obvious in a bug report it's been
tampered with.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is possible, although unlikely, that an integer overflow will occur
when the result of radeon_get_ib_value() is shifted to the left.
Avoid it by casting one of the operands to larger data type (u64).
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Signed-off-by: Igor Artemiev <Igor.A.Artemiev@mcst.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reorganize kerneldoc parameter names to match the parameter
order in the function header.
Problems identified using Coccinelle.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update kdoc entries to reflect the function's parameters. The descriptor
for the 'queue_cnt' parameter has been added, and the incorrect mentions
of 'wave_cnt' and 'vmid', which are not parameters but local variables,
have been removed.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c:954: warning: Function parameter or struct member 'queue_cnt' not described in 'get_wave_count'
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c:954: warning: Excess function parameter 'wave_cnt' description in 'get_wave_count'
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c:954: warning: Excess function parameter 'vmid' description in 'get_wave_count'
Cc: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Cc: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of early_fini.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the *handle to amdgpu_ip_block ptr for all
functions pointers of sw_fini.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the *handle to amdgpu_ip_block ptr for all
functions pointers of sw_init.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the ptr handle to amdgpu_ip_block ptr in all
the functions of late_init function ptr.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the handle ptr to amdgpu_ip_block ptr
for all functions pointers on early_init.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add sysfs node to show supported partition modes across all NPS modes
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In certain use cases, NPS data needs to be refreshed again from
discovery table. Add API parameter to refresh NPS data from discovery
table.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In order for SDMA not to be switched between VM_INVALIDATION
request and ack, use an single VM_INVALIDATION packet in function
sdma_v5_2_ring_emit_vm_flush.
Signed-off-by: YuanShang <YuanShang.Mao@amd.com>
Reviewed-By: Horace Chen <horace.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extract the resume sequence from sdma_v5_2_gfx_resume for
starting/restarting an individual instance.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC 3.2.303 contains some improvements as summarized below:
* Improve brightness control
* Add support for UHBR10 eDP
* OPTC required only for DTBCLK_P for dcn401
* Fix TBT monitor resume issue
* Code cleanup
Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
