syzbot reported a WARNING in bond_xdp_get_xmit_slave. To reproduce
this[1], one bond device (bond1) has xdpdrv, which increases
bpf_master_redirect_enabled_key. Another bond device (bond0) which is
unsupported by XDP but its slave (veth3) has xdpgeneric that returns
XDP_TX. This triggers WARN_ON_ONCE() from the xdp_master_redirect().
To reduce unnecessary warnings and improve log management, we need to
delete the WARN_ON_ONCE() and add ratelimit to the netdev_err().
[1] Steps to reproduce:
# Needs tx_xdp with return XDP_TX;
ip l add veth0 type veth peer veth1
ip l add veth3 type veth peer veth4
ip l add bond0 type bond mode 6 # BOND_MODE_ALB, unsupported by XDP
ip l add bond1 type bond # BOND_MODE_ROUNDROBIN by default
ip l set veth0 master bond1
ip l set bond1 up
# Increases bpf_master_redirect_enabled_key
ip l set dev bond1 xdpdrv object tx_xdp.o section xdp_tx
ip l set veth3 master bond0
ip l set bond0 up
ip l set veth4 up
# Triggers WARN_ON_ONCE() from the xdp_master_redirect()
ip l set veth3 xdpgeneric object tx_xdp.o section xdp_tx
Reported-by: syzbot+c187823a52ed505b2257@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c187823a52ed505b2257
Fixes: 9e2ee5c7e7 ("net, bonding: Add XDP support to the bonding driver")
Signed-off-by: Jiwon Kim <jiwonaid0@gmail.com>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20240918140602.18644-1-jiwonaid0@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As Christophe pointed out, tuning the chacha implementation by
scheduling the instructions like what GCC does can improve the
performance.
The tuning does not introduce too much complexity (basically it's just
reordering some instructions). And the tuning does not hurt readibility
too much: actually the tuned code looks even more similar to a
textbook-style implementation based on 128-bit vectors. So overall it's
a good deal to me.
Tested with vdso_test_getchacha and benched with vdso_test_getrandom.
On a LA664 the speedup is 5%, and I expect a larger speedup on LA[2-4]64
with a lower issue rate.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/all/77655d9e-fc05-4300-8f0d-7b2ad840d091@csgroup.eu/
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Update the driver to prevent alsa-restore.service from failing when
reading data from /var/lib/alsa/asound.state at boot. Ensure that the
restoration of ALSA mixer configurations is skipped if substream->runtime
is NULL.
Fixes: 50291652af ("ASoC: atmel: mchp-pdmc: add PDMC driver")
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://patch.msgid.link/20240924081237.50046-1-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This may be a typo. The comment has said shared locks are
not allowed when this bit is set. If using shared lock, the
wait in `fuse_file_cached_io_open` may be forever.
Fixes: 205c1d8026 ("fuse: allow parallel dio writes with FUSE_DIRECT_IO_ALLOW_MMAP")
CC: stable@vger.kernel.org # v6.9
Signed-off-by: yangyun <yangyun50@huawei.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Function drm_sched_entity_push_job() doesn't have a return value,
remove the return value description for it.
Correct several other typo errors.
v2 (Philipp):
- more correction with related comments.
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240917144732.2758572-1-shuicheng.lin@intel.com
Paul Barker says:
====================
Fix maximum TX/RX frame sizes in ravb driver
These patches fix a couple of bugs in the maximum supported TX/RX frame
sizes in the ravb driver.
* For the GbEth IP, we were advertising a maximum TX frame size/MTU
that was larger that the maximum the hardware can transmit.
* For the R-Car AVB IP, we were unnecessarily setting the maximum RX
frame size/MRU based on the MTU, which by default is smaller than
the maximum the hardware can receive.
For the R-Car AVB IP, the maximum TX frame size should be 2047 (not
2048), but additional work will be required to validate that change so
it is not included in this series.
Changes v2->v3:
* Pick up Reviewed-by tag and suggested comment improvement from
Niklas.
Changes v1->v2:
* Rebase on net tree as these are both bugfixes.
* Pick up Reviewed-by tags.
====================
Link: https://patch.msgid.link/20240918081839.259-1-paul.barker.ct@bp.renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The RX frame size limit should not be based on the current MTU setting.
Instead it should be based on the hardware capabilities.
While we're here, improve the description of the receive frame length
setting as suggested by Niklas.
Fixes: c156633f13 ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The datasheets for all SoCs using the GbEth IP specify a maximum
transmission frame size of 1.5 kByte. I've confirmed through internal
discussions that support for 1522 byte frames has been validated, which
allows us to support the default MTU of 1500 bytes after reserving space
for the Ethernet header, frame checksums and an optional VLAN tag.
Fixes: 2e95e08ac0 ("ravb: Add rx_max_buf_size to struct ravb_hw_info")
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the `mac802154_scan_worker` function, the `scan_req->type` field was
accessed after the RCU read-side critical section was unlocked. According
to RCU usage rules, this is illegal and can lead to unpredictable
behavior, such as accessing memory that has been updated or causing
use-after-free issues.
This possible bug was identified using a static analysis tool developed
by myself, specifically designed to detect RCU-related issues.
To address this, the `scan_req->type` value is now stored in a local
variable `scan_req_type` while still within the RCU read-side critical
section. The `scan_req_type` is then used after the RCU lock is released,
ensuring that the type value is safely accessed without violating RCU
rules.
Fixes: e2c3e6f53a ("mac802154: Handle active scanning")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawei Ye <jiawei.ye@foxmail.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/tencent_3B2F4F2B4DA30FAE2F51A9634A16B3AD4908@qq.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
The commit b8c43360f6 ("net: stmmac: No need to calculate speed divider
when offload is disabled") allows the "port_transmit_rate_kbps" to be
set to a value of 0, which is then passed to the "div_s64" function when
tc-cbs is disabled. This leads to a zero-division error.
When tc-cbs is disabled, the idleslope, sendslope, and credit values the
credit values are not required to be configured. Therefore, adding a return
statement after setting the txQ mode to DCB when tc-cbs is disabled would
prevent a zero-division error.
Fixes: b8c43360f6 ("net: stmmac: No need to calculate speed divider when offload is disabled")
Cc: <stable@vger.kernel.org>
Co-developed-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: KhaiWenTan <khai.wen.tan@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240918061422.1589662-1-khai.wen.tan@linux.intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
RTL8125 added fields to the tally counter, what may result in the chip
dma'ing these new fields to unallocated memory. Therefore make sure
that the allocated memory area is big enough to hold all of the
tally counter values, even if we use only parts of it.
Fixes: f1bce4ad2f ("r8169: add support for RTL8125")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/741d26a9-2b2b-485d-91d9-ecb302e345b5@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The (!fiq->connected) check was moved into the queuing method resulting in
the following:
Fixes: 5de8acb41c ("fuse: cleanup request queuing towards virtiofs")
Reported-by: Lai, Yi <yi1.lai@linux.intel.com>
Closes: https://lore.kernel.org/all/ZvFEAM6JfrBKsOU0@ly-workstation/
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
for_each_set_bit was used wrongly in aqr107_config_init() when iterating
over LEDs. Drop misleading 'index' variable and call
aqr_phy_led_active_low_set() for each set bit representing an LED which
is driven by VDD instead of GND pin.
Fixes: 61578f6793 ("net: phy: aquantia: add support for PHY LEDs")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/9b1f0cd91f4cda54c8be56b4fe780480baf4aa0f.1726580902.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
phy_modify_mmd was used wrongly in aqr_phy_led_active_low_set() resulting
in a no-op instead of setting the VEND1_GLOBAL_LED_DRIVE_VDD bit.
Correctly set VEND1_GLOBAL_LED_DRIVE_VDD bit.
Fixes: 61578f6793 ("net: phy: aquantia: add support for PHY LEDs")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/ab963584b0a7e3b4dac39472a4b82ca264d79630.1726580902.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When broadcasting data to multiple nodes via MHI, using skb_clone()
causes all nodes to receive the same header data. This can result in
packets being discarded by endpoints, leading to lost data.
This issue occurs when a socket is closed, and a QRTR_TYPE_DEL_CLIENT
packet is broadcasted. All nodes receive the same destination node ID,
causing the node connected to the client to discard the packet and
remain unaware of the client's deletion.
Replace skb_clone() with pskb_copy(), to create a separate copy of
the header for each sk_buff.
Fixes: bdabad3e36 ("net: Add Qualcomm IPC router")
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Reviewed-by: Jeffery Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Link: https://patch.msgid.link/20240916170858.2382247-1-quic_yabdulra@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Several places in drm.ko use struct drm_rect and its helpers. This
only works as the called interfaces are declared as static inline in
the header file. Fix the issue by linking drm_rect.o into drm.ko.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240919185436.86790-1-tzimmermann@suse.de
We don't use the block size information for the clear color
plane. Technically the entire fb is the single block for the
single 64B clear color surface, so there is just no way to
delcare that as a constant since the fb size can be anything.
Define the clear color block size as 0x0 to make things less
confusing. We already declared that cpp/chars_per_block=0 for
the clear color as well. That also causes the drm core code
to mostly ignore the clear color plane, which is exactly
what we want since that code doesn't know how to deal with
the clear color plane.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918144445.5716-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
When the user requests the ALL_SUB_MPAGES mode sense page,
ata_msense_control() adds the CDL_T2A_SUB_MPAGE twice instead of adding
the CDL_T2A_SUB_MPAGE and CDL_T2B_SUB_MPAGE pages information. Correct
the second call to ata_msense_control_spgt2() to report the
CDL_T2B_SUB_MPAGE page.
Fixes: 673b2fe6ff ("scsi: ata: libata-scsi: Add support for CDL pages mode sense")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
ata_msense_control_spgt2() can be called even for devices that do not
support CDL when the user requests the ALL_SUB_MPAGES mode sense page,
but for such device, this will cause a NULL pointer dereference as
dev->cdl is NULL. Similarly, we should not return any data if
ata_msense_control_spgt2() is called when the user requested the
CDL_T2A_SUB_MPAGE or CDL_T2B_SUB_MPAGE pages for a device that does not
support CDL.
Avoid this potential NULL pointer dereference by checking if the device
support CDL on entry to ata_msense_control_spgt2() and return 0 if it
does not support CDL.
Reported-by: syzbot+37757dc11ee77ef850bb@syzkaller.appspotmail.com
Tested-by: syzbot+37757dc11ee77ef850bb@syzkaller.appspotmail.com
Fixes: 602bcf2126 ("ata: libata: Improve CDL resource management")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
The ilk+ disable_lp_wm boolean has the exact same role as
disable_cxsr for gmch platforms. The documentation also
still talks about CxSR on ilk+ even theough the way you
control it has now change to involve toggling the LP watermarks.
Get rid of disable_lp_wm and just use disable_cxsr for ilk+
as well.
TODO: Unify even more to not have any gmch vs. ilk+
details in high level modeset code...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916162413.8555-7-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
As with other watermark calculations, the dodgy pre-g4x
update_wm_{pre,post} flag calcultion would like to know
if a modeset is about to happen or not, and technically
later stages in the atomic_check() may still flag one.
In practice that shouldn't happen as we don't have dynamic
CDCLK implemented for these old platforms.
Regardless it'll be nice to move this old cruft out from
the supposedly platform agnostic plane code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916162413.8555-6-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
intel_wm_need_update() is a mess when it comes to variable
names and constness. The checks also keep alternating randomly
between 'old != cur' vs. 'cur != old'. Clean it all up.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916162413.8555-5-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Pull the ilk/snb/ivb LP watermark disable checks into a separate
function similar to the gmch counterpart (i9xx_must_disable_cxsr()).
Reduces the clutter in intel_plane_atomic_calc_changes() significantly.
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916162413.8555-4-ville.syrjala@linux.intel.com
intel_sprite_set_colorkey_ioctl() lives in intel_sprice_uapi.{c,h}
these days. For some reason the old protoype was left behind
in intel_sprite.h and even used by i915_driver.c. Remove the
leftovers and switch to including the correct header for the
prototype.
v2: Drop more unnecessary forward declarations
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916162413.8555-2-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Add kfree(root_ops) in this case to avoid memleak of root_ops,
leaks when pci_find_bus() != 0.
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Now _percpu_read() and _percpu_write() macros call __percpu_read()
and __percpu_write() static inline functions that result in a single
assembly instruction. However, percpu infrastructure expects its leaf
definitions to encode the size of their percpu variable, so the patch
merges all the asm clauses from the static inline function into the
corresponding leaf macros.
The secondary effect of this change is to avoid explicit __percpu
annotations for function arguments. Currently, __percpu macro is defined
in include/linux/compiler_types.h, but with proposed patch [1], __percpu
definition will need macros from include/asm-generic/percpu.h, creating
forward dependency loop.
The proposed solution is the same as x86 architecture uses.
[1] https://lore.kernel.org/lkml/20240812115945.484051-4-ubizjak@gmail.com/
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
LoongArch has similar problems explained in commit 7f0b1bf045
("arm64: Fix barriers used for page table modifications"), when hardware
page table walker (PTW) enabled, speculative accesses may cause spurious
page fault in kernel space. Theoretically, in order to completely avoid
spurious page fault we need a "dbar + ibar" pair between the page table
modifications and the subsequent memory accesses using the corresponding
virtual address. But "ibar" is too heavy for performace, so we only use
a "dbar 0b11000" in set_pte(). And let spurious_fault() filter the rest
rare spurious page faults which should be avoided by "ibar".
Besides, we replace the llsc loop with amo in set_pte() which has better
performace, and refactor mmu_context.h to 1) avoid any load/store/branch
instructions between the writing of CSR.ASID & CSR.PGDL, 2) ensure flush
tlb operation is after updating ASID.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add set_direct_map_*() functions for setting the direct map alias for
the page to its default permissions and to an invalid state that cannot
be cached in a TLB. (See d253ca0c3 ("x86/mm/cpa: Add set_direct_map_*()
functions")) Add a similar implementation for LoongArch.
This fixes the KFENCE warnings during hibernation:
==================================================================
BUG: KFENCE: invalid read in swsusp_save+0x368/0x4d8
Invalid read at 0x00000000f7b89a3c:
swsusp_save+0x368/0x4d8
hibernation_snapshot+0x3f0/0x4e0
hibernate+0x20c/0x440
state_store+0x128/0x140
kernfs_fop_write_iter+0x160/0x260
vfs_write+0x2c0/0x520
ksys_write+0x74/0x160
do_syscall+0xb0/0x160
CPU: 0 UID: 0 PID: 812 Comm: bash Tainted: G B 6.11.0-rc1+ #1566
Tainted: [B]=BAD_PAGE
Hardware name: Loongson-LS3A5000-7A1000-1w-CRB, BIOS vUDK2018-LoongArch-V2.0.0 10/21/2022
==================================================================
Note: We can only set permissions for KVRANGE/XKVRANGE kernel addresses.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add set_memory_ro/rw/x/nx architecture hooks to change the page
attribution.
Use own set_memory.h rather than generic set_memory.h (i.e.
include/asm-generic/set_memory.h), because we want to add other function
prototypes here.
Note: We can only set attributes for KVRANGE/XKVRANGE kernel addresses.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Probe ISA level, TLB, IOCSR information from CPUCFG to improve kernel
resilience to different core implementations.
BTW, IOCSR register definition appears to be a platform-specific spec
instead of an architecture spec, even for the Loongson CPUs there is no
guarantee that IOCSR will always present.
Thus it's dangerous to perform IOCSR probing without checking CPU type
and instruction availability.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add ACPI BGRT support on LoongArch so it can display image provied by
acpi table at boot stage and switch to graphical UI smoothly.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Currently, many architectures support generic CPU vulnerabilites, such
as x86, arm64 and riscv:
commit 61dc0f555b ("x86/cpu: Implement CPU vulnerabilites sysfs functions")
commit 61ae1321f0 ("arm64: enable generic CPU vulnerabilites support")
commit 0e3f3649d4 ("riscv: Enable generic CPU vulnerabilites support")
All LoongArch CPUs (since Loongson-3A5000) implement a special mechanism
in the processor core to prevent "Meltdown" and "Spectre" attacks, so it
can enable generic CPU vulnerabilites support for LoongArch too.
Without this patch, there are no user interfaces of vulnerabilities to
check on LoongArch. The output of those files reflects the state of the
CPUs in the system, the output value "Not affected" means "CPU is not
affected by the vulnerability".
Before:
# cat /sys/devices/system/cpu/vulnerabilities/spec_rstack_overflow
cat: /sys/devices/system/cpu/vulnerabilities/spec_rstack_overflow: No such file or directory
# cat /sys/devices/system/cpu/vulnerabilities/spec_store_bypass
cat: /sys/devices/system/cpu/vulnerabilities/spec_store_bypass: No such file or directory
# cat /sys/devices/system/cpu/vulnerabilities/meltdown
cat: /sys/devices/system/cpu/vulnerabilities/meltdown: No such file or directory
After:
# cat /sys/devices/system/cpu/vulnerabilities/spec_rstack_overflow
Not affected
# cat /sys/devices/system/cpu/vulnerabilities/spec_store_bypass
Not affected
# cat /sys/devices/system/cpu/vulnerabilities/meltdown
Not affected
Link: https://www.loongson.cn/EN/news/show?id=633
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The drv_priv hooked to mac80211 become as below.
(drv_priv) (instance-0)
+---------------+ +-----------+ +----------------+
| ieee80211_vif | <---> | rtw89_vif | -------> | rtw89_vif_link |
+---------------+ +-----------+ | +----------------+
|
| (instance-1)
| +----------------+
+---> | rtw89_vif_link |
+----------------+
(drv_priv) (instance-0)
+---------------+ +-----------+ +----------------+
| ieee80211_sta | <---> | rtw89_sta | -------> | rtw89_sta_link |
+---------------+ +-----------+ | +----------------+
|
| (instance-1)
| +----------------+
+---> | rtw89_sta_link |
+----------------+
The relation bewteen mac80211 link_id and our link instance is like below.
|\
(link_id) | \
0 -------- | |
1 -------- | | ------ instance-0 (link_id: X) -> work on HW band 0
2 -------- | |
... | | ------ instance-1 (link_id: Y) -> work on HW band 1
14 -------- | |
| /
|/
N.B. For cases of non-MLD connection, we set our link instance-0
active with link_id 0. So, our code flow can be compatible between
non-MLD connection and MLD connection.
Based on above, we tweak entire driver architecture first. But, we don't
dynamically enable multiple links here. That will be handled separately.
Most of the things changed here are changing flows to iterate all active
links and read bss_conf/link_sta data according to target link. And, for
cases of scan, ROC, WOW, we use instance-0 to deal with the request.
There are some things listed below, which work for now but need to extend
before multiple active links.
1. tx path
select suitable link instance among multiple active links
2. rx path
determine rx link by PPDU instead of always link instance-0
3. CAM
apply MLD pairwise key to any active links dynamically
Besides, PS code cannot easily work along with tweaking architecture. With
supporting MLO flag (currently false), we disable PS first and will fix it
by another commit in the following.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-8-pkshih@realtek.com
Refactor STA related functions, e.g. add/assoc/disassoc/disconnect/remove
to separate most link stuffs into sub-functions for MLO reuse.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-7-pkshih@realtek.com
Refactor VIF related functions, e.g. add/remove/assoc/mapping
to separate most link stuffs into sub-functions for MLO reuse.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-6-pkshih@realtek.com
Tweak code to not always access sta->deflink directly. Instead,
according to link_id, read target link_sta from sta->link[].
For now, rtwsta_link->link_id keeps 0. When driver starts to
support MLO, the link_id will be assigned.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-5-pkshih@realtek.com
Tweak code to not always access vif->bss_conf directly. Instead,
according to link_id, read target bss_conf from vif->link_conf[].
For now, rtwvif_link->link_id keeps 0. When driver starts to
support MLO, the link_id will be assigned.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-4-pkshih@realtek.com
This is an intermediate version that is separated from subsequent major
MLO changes, so some functions' namings are not really determined here.
e.g. struct rtw89_sta_link *sta_to_rtwsta_safe(struct ieee80211_sta *sta)
No logic is changed.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-3-pkshih@realtek.com
This is an intermediate version that is separated from subsequent major
MLO changes, so some functions' namings are not really determined here.
e.g. struct rtw89_vif_link *vif_to_rtwvif_safe(struct ieee80211_vif *vif)
No logic is changed.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-2-pkshih@realtek.com
Fixes a race condition reported here: https://github.com/AsahiLinux/linux/issues/309#issuecomment-2238968609
The whole premise of lockless access to a single-producer-single-
consumer queue is that there is just a single producer and single
consumer. That means we can't call drm_sched_can_queue() (which is
about queueing more work to the hw, not to the spsc queue) from
anywhere other than the consumer (wq).
This call in the producer is just an optimization to avoid scheduling
the consuming worker if it cannot yet queue more work to the hw. It
is safe to drop this optimization to avoid the race condition.
Suggested-by: Asahi Lina <lina@asahilina.net>
Fixes: a78422e9df ("drm/sched: implement dynamic job-flow control")
Closes: https://github.com/AsahiLinux/linux/issues/309
Cc: stable@vger.kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Janne Grunau <j@jannau.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240913202301.16772-1-robdclark@gmail.com
DRM's GPU scheduler is arguably in need of more intensive maintenance.
Danilo and Philipp volunteer to help with the maintainership.
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916185159.35727-3-pstanner@redhat.com
As we iterate we need to mark that we no longer need iterators -
otherwise we'll infinite loop via the "too many iters" check when
there's many snapshots.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
if it doesn't get set we'll never be able to flush the btree write
buffer; this only happens in fake rw mode, but prevents us from shutting
down.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
