Dut to the high HDMI signal voltage driver, Mickey have meet
a serious RF/EMI problem, so we decided to reduce HDMI signal
voltage to a proper value.
The default params for phy is cklvl = 20 & txlvl = 13 (RF/EMI failed)
ck: lvl = 13, term=100, vlo = 2.71, vhi=3.14, vswing = 0.43
tx: lvl = 20, term=100, vlo = 2.81, vhi=3.16, vswing = 0.35
1. We decided to reduce voltage value to lower, but VSwing still
keep high, RF/EMI have been improved but still failed.
ck: lvl = 6, term=100, vlo = 2.61, vhi=3.11, vswing = 0.50
tx: lvl = 6, term=100, vlo = 2.61, vhi=3.11, vswing = 0.50
2. We try to keep voltage value and vswing both lower, then RF/EMI
test all passed ;)
ck: lvl = 11, term= 66, vlo = 2.68, vhi=3.09, vswing = 0.40
tx: lvl = 11, term= 66, vlo = 2.68, vhi=3.09, vswing = 0.40
When we back to run HDMI different test and single-end test, we see
different test passed, but signle-end test failed. The oscilloscope
show that simgle-end clock's VL value is 1.78v (which remind LowLimit
should not lower then 2.6v).
3. That's to say there are some different between PHY document and
measure value. And according to experiment 2 results, we need to
higher clock voltage and lower data voltage, then we can keep RF/EMI
satisfied and single-end & differen test passed.
ck: lvl = 9, term=100, vlo = 2.65, vhi=3.12, vswing = 0.47
tx: lvl = 16, term=100, vlo = 2.75, vhi=3.15, vswing = 0.39
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240908145511.3331451-3-jonas@kwiboo.se
RK3228 and RK3328 clock rate is being validated against a mpll config
table intended for a Synopsys phy, and not the used inno-hdmi-phy.
Instead get a reference to the hdmiphy clk and validate rates against
it to enable use of HDMI2.0 modes, e.g. 4K@60Hz, on RK3228 and RK3328.
For Synopsis phy the max_tmds_clock validation is sufficient.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240908145511.3331451-2-jonas@kwiboo.se
- Implement the SCHED_DEADLINE server infrastructure - Daniel Bristot de Oliveira's
last major contribution to the kernel:
"SCHED_DEADLINE servers can help fixing starvation issues of low priority
tasks (e.g., SCHED_OTHER) when higher priority tasks monopolize CPU
cycles. Today we have RT Throttling; DEADLINE servers should be able to
replace and improve that."
(Daniel Bristot de Oliveira, Peter Zijlstra, Joel Fernandes,
Youssef Esmat, Huang Shijie)
- Preparatory changes for sched_ext integration:
- Use set_next_task(.first) where required
- Fix up set_next_task() implementations
- Clean up DL server vs. core sched
- Split up put_prev_task_balance()
- Rework pick_next_task()
- Combine the last put_prev_task() and the first set_next_task()
- Rework dl_server
- Add put_prev_task(.next)
(Peter Zijlstra, with a fix by Tejun Heo)
- Complete the EEVDF transition and refine EEVDF scheduling:
- Implement delayed dequeue
- Allow shorter slices to wakeup-preempt
- Use sched_attr::sched_runtime to set request/slice suggestion
- Document the new feature flags
- Remove unused and duplicate-functionality fields
- Simplify & unify pick_next_task_fair()
- Misc debuggability enhancements
(Peter Zijlstra, with fixes/cleanups by Dietmar Eggemann,
Valentin Schneider and Chuyi Zhou)
- Initialize the vruntime of a new task when it is first enqueued,
resulting in significant decrease in latency of newly woken tasks.
(Zhang Qiao)
- Introduce SM_IDLE and an idle re-entry fast-path in __schedule()
(K Prateek Nayak, Peter Zijlstra)
- Clean up and clarify the usage of Clean up usage of rt_task()
(Qais Yousef)
- Preempt SCHED_IDLE entities in strict cgroup hierarchies
(Tianchen Ding)
- Clarify the documentation of time units for deadline scheduler
parameters. (Christian Loehle)
- Remove the HZ_BW chicken-bit feature flag introduced a year ago,
the original change seems to be working fine.
(Phil Auld)
- Misc fixes and cleanups (Chen Yu, Dan Carpenter, Huang Shijie,
Peilin He, Qais Yousefm and Vincent Guittot)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TEC6
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2024-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Implement the SCHED_DEADLINE server infrastructure - Daniel Bristot
de Oliveira's last major contribution to the kernel:
"SCHED_DEADLINE servers can help fixing starvation issues of low
priority tasks (e.g., SCHED_OTHER) when higher priority tasks
monopolize CPU cycles. Today we have RT Throttling; DEADLINE
servers should be able to replace and improve that."
(Daniel Bristot de Oliveira, Peter Zijlstra, Joel Fernandes, Youssef
Esmat, Huang Shijie)
- Preparatory changes for sched_ext integration:
- Use set_next_task(.first) where required
- Fix up set_next_task() implementations
- Clean up DL server vs. core sched
- Split up put_prev_task_balance()
- Rework pick_next_task()
- Combine the last put_prev_task() and the first set_next_task()
- Rework dl_server
- Add put_prev_task(.next)
(Peter Zijlstra, with a fix by Tejun Heo)
- Complete the EEVDF transition and refine EEVDF scheduling:
- Implement delayed dequeue
- Allow shorter slices to wakeup-preempt
- Use sched_attr::sched_runtime to set request/slice suggestion
- Document the new feature flags
- Remove unused and duplicate-functionality fields
- Simplify & unify pick_next_task_fair()
- Misc debuggability enhancements
(Peter Zijlstra, with fixes/cleanups by Dietmar Eggemann, Valentin
Schneider and Chuyi Zhou)
- Initialize the vruntime of a new task when it is first enqueued,
resulting in significant decrease in latency of newly woken tasks
(Zhang Qiao)
- Introduce SM_IDLE and an idle re-entry fast-path in __schedule()
(K Prateek Nayak, Peter Zijlstra)
- Clean up and clarify the usage of Clean up usage of rt_task()
(Qais Yousef)
- Preempt SCHED_IDLE entities in strict cgroup hierarchies
(Tianchen Ding)
- Clarify the documentation of time units for deadline scheduler
parameters (Christian Loehle)
- Remove the HZ_BW chicken-bit feature flag introduced a year ago,
the original change seems to be working fine (Phil Auld)
- Misc fixes and cleanups (Chen Yu, Dan Carpenter, Huang Shijie,
Peilin He, Qais Yousefm and Vincent Guittot)
* tag 'sched-core-2024-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
sched/cpufreq: Use NSEC_PER_MSEC for deadline task
cpufreq/cppc: Use NSEC_PER_MSEC for deadline task
sched/deadline: Clarify nanoseconds in uapi
sched/deadline: Convert schedtool example to chrt
sched/debug: Fix the runnable tasks output
sched: Fix sched_delayed vs sched_core
kernel/sched: Fix util_est accounting for DELAY_DEQUEUE
kthread: Fix task state in kthread worker if being frozen
sched/pelt: Use rq_clock_task() for hw_pressure
sched/fair: Move effective_cpu_util() and effective_cpu_util() in fair.c
sched/core: Introduce SM_IDLE and an idle re-entry fast-path in __schedule()
sched: Add put_prev_task(.next)
sched: Rework dl_server
sched: Combine the last put_prev_task() and the first set_next_task()
sched: Rework pick_next_task()
sched: Split up put_prev_task_balance()
sched: Clean up DL server vs core sched
sched: Fixup set_next_task() implementations
sched: Use set_next_task(.first) where required
sched/fair: Properly deactivate sched_delayed task upon class change
...
We've now completely stopped using drm_i915_gem_object in display code
that gets built for xe. Kill off the -Ddrm_i915_gem_object=xe_bo
hack. Good riddance.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0eae2b62b635acafe5dc97dc4b205aaa34ce1e53.1726589119.git.jani.nikula@intel.com
Prefer the driver agnostic struct drm_gem_object over i915 specific
struct drm_i915_gem_object.
Do some opportunistic struct intel_display conversions while at it,
because it's more convenient to deal with.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/51bdb3c9b798e28bd70c259fc3874d80bc9b7443.1726589119.git.jani.nikula@intel.com
intel_fb_obj() returns struct drm_i915_gem_object, which is not right
for xe, and only works because xe defines
-Ddrm_i915_gem_object=xe_bo. Switch to intel_fb_bo() and convert to
struct xe_bo from there.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/39f3d52cf156aecc4b2ed5cf1c9342b1c15143b4.1726589119.git.jani.nikula@intel.com
Prefer the driver agnostic struct drm_gem_object over i915 specific
struct drm_i915_gem_object.
The xe specific intel_fb_bo.h becomes redundant. Remove it, and rely on
the common header in i915 display.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0efbc9ae2dbe157f92fa71d423ed37fd17346da5.1726589119.git.jani.nikula@intel.com
The display code needs to deal with gem objects, and mostly uses struct
drm_i915_gem_object. That's not great, because for xe we need to
redefine it struct xe_bo during build.
Start a common interface using struct drm_gem_object, with separate
implementations for i915 and xe. For starters, convert i9xx_wm.c to use
it.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/df6867523a0b5fdd4eb63f657f545603ae6f6e0b.1726589119.git.jani.nikula@intel.com
In the ether3_probe function, a timer is initialized with a callback
function ether3_ledoff, bound to &prev(dev)->timer. Once the timer is
started, there is a risk of a race condition if the module or device
is removed, triggering the ether3_remove function to perform cleanup.
The sequence of operations that may lead to a UAF bug is as follows:
CPU0 CPU1
| ether3_ledoff
ether3_remove |
free_netdev(dev); |
put_devic |
kfree(dev); |
| ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2);
| // use dev
Fix it by ensuring that the timer is canceled before proceeding with
the cleanup in ether3_remove.
Fixes: 6fd9c53f71 ("net: seeq: Convert timers to use timer_setup()")
Signed-off-by: Kaixin Wang <kxwang23@m.fudan.edu.cn>
Link: https://patch.msgid.link/20240915144045.451-1-kxwang23@m.fudan.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The raw register reads/writes are there as micro-optimizations to avoid
multiple pointer indirections on uncore->regs. Presumably this is useful
when there are plenty of register reads/writes in the same
function. However, the display irq handling only has a few raw
reads/writes. Remove them for simplification.
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408125445.3227678-1-jani.nikula@intel.com
intel_dp_init_connector() is no place for detecting stuff via
DPCD (except perhaps for eDP). Move the colorimetry stuff into
a more appropriate place.
Cc: Jouni Högander <jouni.hogander@intel.com>
Fixes: 00076671a6 ("drm/i915/display: Move colorimetry_support from intel_psr to intel_dp")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918190441.29071-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Clean up the main commit_tail() codepath a bit by pulling
the post plane update steps that need to performed after
readout into their own little function
(intel_post_plane_update_after_readout()).
Declutters intel_atomic_commit_tail() a bit, and should
hopefully aid in keeping intel_pre_plane_update() vs.
intel_post_plane_update*() in sync.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916152958.17332-3-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Add PVC PCI IDs to the xe_pciids.h header. They're not yet used in the
driver.
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6ac1829493a53a3fec889c746648d627a0296892.1725624296.git.jani.nikula@intel.com
- rcu pointer assignment in smk_set_cipso
- indentation in smack_ip_output
-----BEGIN PGP SIGNATURE-----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=V/iJ
-----END PGP SIGNATURE-----
Merge tag 'Smack-for-6.12' of https://github.com/cschaufler/smack-next
Pull smack updates from Casey Schaufler:
"Two patches: one is a simple indentation correction, the other
corrects a potentially rcu unsafe pointer assignment"
* tag 'Smack-for-6.12' of https://github.com/cschaufler/smack-next:
smackfs: Use rcu_assign_pointer() to ensure safe assignment in smk_set_cipso
security: smack: Fix indentation in smack_netfilter.c
The variable 'kc' is handled in the function
soc_tplg_control_dbytes_create(), and 'kc->private_value'
is assigned to 'sbe', so In the function soc_tplg_dbytes_create(),
the right 'sbe' should be 'kc.private_value', the same logical error
in the function soc_tplg_dmixer_create(), thus fix them.
Fixes: 0867278200 ("ASoC: topology: Unify code for creating standalone and widget bytes control")
Fixes: 4654ca7cc8 ("ASoC: topology: Unify code for creating standalone and widget mixer control")
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20240914081608.3514-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
axienet_free_tx_chain returns the number of DMA descriptors it's
handled. However, axienet_tx_poll treats the return as the number of
packets. When scatter-gather SKBs are enabled, a single packet may use
multiple DMA descriptors, which causes incorrect packet counts. Fix this
by explicitly keepting track of the number of packets processed as
separate from the DMA descriptors.
Budget does not affect the number of Tx completions we can process for
NAPI, so we use the ring size as the limit instead of budget. As we no
longer return the number of descriptors processed to axienet_tx_poll, we
now update tx_bd_ci in axienet_free_tx_chain.
Fixes: 8a3b7a252d ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20240913145156.2283067-1-sean.anderson@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As advised by Documentation/networking/napi.rst, masking IRQs after
calling napi_schedule can be racy. Avoid this by only masking/scheduling
if napi_schedule_prep returns true.
Fixes: 9e2bc267e7 ("net: axienet: Use NAPI for TX completion path")
Fixes: cc37610caa ("net: axienet: implement NAPI and GRO receive")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240913145711.2284295-1-sean.anderson@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
These are only fixes originally meant for 6.11 final. Because of serious
travel problems, I could not send them in time and so this is my first
PR for 6.12.
The Aspeed driver tracks the controller's state (stop, pending,
start, etc.). Previously, when the stop command was sent, the
state was not updated. The fix in this pull request ensures the
driver's state is aligned with the device status.
The Intel SCH driver receives a new look, and among the cleanups,
there is a fix where, due to an oversight, an if/else statement
was missing the else, causing it to move forward instead of
exiting the function in case of an error.
The Qualcomm GENI I2C driver adds the IRQF_NO_AUTOEN flag to the
IRQ setup to prevent unwanted interrupts during probe.
The Xilinx XPS controller fixes TX FIFO handling to avoid missed
NAKs. Another fix ensures the controller is reinitialized when
the bus appears busy.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmbr7nAACgkQFA3kzBSg
KbbdRA/9Ft8+rQNlUH8oZ90qMjAu99ktwgLS99putSRtnnRClodLCafDskgYan5e
H+UAr2LsolwWkG6Py47LRlghX1+lg/S6ZmWqsNQitJqeGc0FShO8KYDRx/kJDWU6
wsielpFlzMvdLMcGtSAjbXHOxHKn2XX679MLpPQyLX4nbqcg0D82wWiLXjDVG21q
BzUD0Ihgu4knX1uKPJjnoD9/aS+a97GbwPxGeMgQe03tZPZptkjnNvOilxbJp+cp
Rne66N81/ztfdsJyvFsGtNAHLlpu8JsnhQjH6RkUYrXgiM2ezp6UkiSmkPaVMvJJ
tDkZXlr5HNLZYHj48AeGAmZ7Y/GuP7iB6YfrCBe5G0bxB25M6dVGqeEZCtbuaBd+
HBn3twG6Mv+fcPrgT2+poM4zUF3yRF8y5jcCCNeenA1srib//fPc3aS0eCZjeEHT
MhZ6VUiEMcS//S0yO/2zDfzoCvPOxBns8ofoYrTEsfntg/3CDnmGTv9UO0Fqnlmo
uIIMljIxhfAKF7qMWuHtXjzxsLnmGqG3KrrvNY0ZUY+IgkiXCzvQwXo7ooO9TJby
mJowUROYwcylD2F29+MSrXZ0Vxh0PeZFj9bZA9nPdfaSOpXO9/ZSbvDwocfBioC8
utqqR68IqLUUTJZIhk/S4CqkcL48P0ayOyQVgcKUiwJhJ5WHZqI=
=KRVy
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.11-final-but-missed-it' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"The Aspeed driver tracks the controller's state (stop, pending, start,
etc.). Previously, when the stop command was sent, the state was not
updated. The fix ensures the driver's state is aligned with the device
status.
The Intel SCH driver receives a new look, and among the cleanups,
there is a fix where, due to an oversight, an if/else statement was
missing the else, causing it to move forward instead of exiting the
function in case of an error.
The Qualcomm GENI I2C driver adds the IRQF_NO_AUTOEN flag to the IRQ
setup to prevent unwanted interrupts during probe.
The Xilinx XPS controller fixes TX FIFO handling to avoid missed NAKs.
Another fix ensures the controller is reinitialized when the bus
appears busy"
* tag 'i2c-for-6.11-final-but-missed-it' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: qcom-geni: Use IRQF_NO_AUTOEN flag in request_irq()
i2c: isch: Add missed 'else'
i2c: xiic: Try re-initialization on bus busy timeout
i2c: xiic: Wait for TX empty to avoid missed TX NAKs
i2c: aspeed: Update the stop sw state when the bus recovery occurs
It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time unless driver
initially enabled pm_runtime with devm_pm_runtime_enable()
(which handles it for you).
Hence, call pm_runtime_dont_use_autosuspend() at driver exit time
to fix it.
Fixes: 944c01a889 ("spi: lpspi: enable runtime pm for lpspi")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240906021251.610462-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time unless driver
initially enabled pm_runtime with devm_pm_runtime_enable()
(which handles it for you).
Hence, call pm_runtime_dont_use_autosuspend() at driver exit time
to fix it.
Fixes: 4a2f83b7f7 ("spi: atmel-quadspi: add runtime pm support")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240906023956.1004440-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The author of the blamed commit apparently did not notice something
about aqr_wait_reset_complete(): it polls the exact same register -
MDIO_MMD_VEND1:VEND1_GLOBAL_FW_ID - as aqr_firmware_load().
Thus, the entire logic after the introduction of aqr_wait_reset_complete() is
now completely side-stepped, because if aqr_wait_reset_complete()
succeeds, MDIO_MMD_VEND1:VEND1_GLOBAL_FW_ID could have only been a
non-zero value. The handling of the case where the register reads as 0
is dead code, due to the previous -ETIMEDOUT having stopped execution
and returning a fatal error to the caller. We never attempt to load
new firmware if no firmware is present.
Based on static code analysis, I guess we should simply introduce a
switch/case statement based on the return code from aqr_wait_reset_complete(),
to determine whether to load firmware or not. I am not intending to
change the procedure through which the driver determines whether to load
firmware or not, as I am unaware of alternative possibilities.
At the same time, Russell King suggests that if aqr_wait_reset_complete()
is expected to return -ETIMEDOUT as part of normal operation and not
just catastrophic failure, the use of phy_read_mmd_poll_timeout() is
improper, since that has an embedded print inside. Just open-code a
call to read_poll_timeout() to avoid printing -ETIMEDOUT, but continue
printing actual read errors from the MDIO bus.
Fixes: ad649a1fac ("net: phy: aquantia: wait for FW reset before checking the vendor ID")
Reported-by: Clark Wang <xiaoning.wang@nxp.com>
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/netdev/8ac00a45-ac61-41b4-9f74-d18157b8b6bf@nvidia.com/
Reported-by: Hans-Frieder Vogt <hfdevel@gmx.net>
Closes: https://lore.kernel.org/netdev/c7c1a3ae-be97-4929-8d89-04c8aa870209@gmx.net/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Hans-Frieder Vogt <hfdevel@gmx.net>
Link: https://patch.msgid.link/20240913121230.2620122-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Joiners have specific enabling and disabling order dependent on primary
and secondary pipes. This becomes more complex with ultrajoiner where we
have ultrajoiner primary/secondary pipes in addition to bigjoiner
primary/secondary pipes. To unify the approach that works for present
and future joiner cases, use primary and secondary pipe masks to
iterate over pipes.
If joiner is used, derive bigoiner primary and secondary pipe masks
and use following sequences:
Disabling : disable primary pipes followed by secondary pipes,
Enabling: enable secondary pipes followed by primary pipes.
This works well with ultrajoiner too, as ultrajoiner has 2 bigjoiner
primary/secondary pairs (AC, BD).
For non joiner case, enable/disable based on usual pipe order A-D, D-A
respectively.
v2:
-Simplify the iterator macro. (Ville)
-Use struct intel_display. (Ville)
-Add prefix _intel to the helper name. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918063016.2667721-3-ankit.k.nautiyal@intel.com
In most of the cases we now try to avoid mentioning things like
"bigjoiner" or "ultrajoiner" trying to unify the API and refer
mostly to all this functionality as "joiner".
In majority cases that should be way to go.
However in some cases we still need to distinguish between
bigjoiner primaries and secondaries(such as DSC register programming).
Create correspondent helper functions and start using them,
in order be prepared for adding ultrajoiner functionality.
v2: Fixed checkpatch warnings (Ankit)
v3: Introduce ultrajoiner helpers in next patch.
v4: Streamline the helpers and add few more. (Ville)
v5: Add comment to clarify that helpers apply to both bigjoiner and
uncompressed joiner configurations. (Ville)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918063016.2667721-2-ankit.k.nautiyal@intel.com
Add dedicated intel_display_caps for display, with device info and
params. Intentionally prefix the file intel_ instead of i915_. Going
forward, we should do the same for all debugfs files, making them
independent of i915 and xe.
Remove display param dumping from i915 specific i915_capabilities
debugfs.
Note that we don't add node_to_intel_display() functionality in
to_intel_display(). It's too specific for that.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1b825b893dd2d423da167a7b6b21d05e8cd0182c.1726231866.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Four fixes for longstanding ocfs2 issues and the remainder address random
MM things.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZuvTyAAKCRDdBJ7gKXxA
jrc4AP95yg/8E50PLyVKFIsot3Vaodq908cz2vvS0n0915NO7AD+Psy11a2aR1E5
L/ZND8Zyv06qmz73WJ7BUIx0CHCniw4=
=eX0p
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-09-19-00-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"12 hotfixes, 11 of which are cc:stable.
Four fixes for longstanding ocfs2 issues and the remainder address
random MM things"
* tag 'mm-hotfixes-stable-2024-09-19-00-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/madvise: process_madvise() drop capability check if same mm
mm/huge_memory: ensure huge_zero_folio won't have large_rmappable flag set
mm/hugetlb.c: fix UAF of vma in hugetlb fault pathway
mm: change vmf_anon_prepare() to __vmf_anon_prepare()
resource: fix region_intersects() vs add_memory_driver_managed()
zsmalloc: use unique zsmalloc caches names
mm/damon/vaddr: protect vma traversal in __damon_va_thre_regions() with rcu read lock
mm: vmscan.c: fix OOM on swap stress test
ocfs2: cancel dqi_sync_work before freeing oinfo
ocfs2: fix possible null-ptr-deref in ocfs2_set_buffer_uptodate
ocfs2: remove unreasonable unlock in ocfs2_read_blocks
ocfs2: fix null-ptr-deref when journal load failed.
Updates to the usual drivers (ufs, smartpqi, NCR5380, mac_scsi, lpfc,
mpi3mr). There are no user visible core changes and a whole series of
minor updates and fixes. The largest core change is probably the
simplification of the workqueue allocation path.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZuvd5yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishV7dAQC+TSlv
BeNm8W4yAFCXLCwnJh8rT6ZzuBsjsIHH1DPP3wD+IXuIOFf5gVRJGpCNJc/dI082
/ehSrIdeJxwaNoOOt+Y=
=SXZD
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, smartpqi, NCR5380, mac_scsi, lpfc,
mpi3mr).
There are no user visible core changes and a whole series of minor
updates and fixes. The largest core change is probably the
simplification of the workqueue allocation path"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (86 commits)
scsi: smartpqi: update driver version to 2.1.30-031
scsi: smartpqi: fix volume size updates
scsi: smartpqi: fix rare system hang during LUN reset
scsi: smartpqi: add new controller PCI IDs
scsi: smartpqi: add counter for parity write stream requests
scsi: smartpqi: correct stream detection
scsi: smartpqi: Add fw log to kdump
scsi: bnx2fc: Remove some unused fields in struct bnx2fc_rport
scsi: qla2xxx: Remove the unused 'del_list_entry' field in struct fc_port
scsi: ufs: core: Remove ufshcd_urgent_bkops()
scsi: core: Remove obsoleted declaration for scsi_driverbyte_string()
scsi: bnx2i: Remove unused declarations
scsi: core: Simplify an alloc_workqueue() invocation
scsi: ufs: Simplify alloc*_workqueue() invocation
scsi: stex: Simplify an alloc_ordered_workqueue() invocation
scsi: scsi_transport_fc: Simplify alloc_workqueue() invocations
scsi: snic: Simplify alloc_workqueue() invocations
scsi: qedi: Simplify an alloc_workqueue() invocation
scsi: qedf: Simplify alloc_workqueue() invocations
scsi: myrs: Simplify an alloc_ordered_workqueue() invocation
...
