Make it possible to use the Control Flow Integrity (CFI) sanitizer when
Rust is enabled. Enabling CFI with Rust requires that CFI is configured
to normalize integer types so that all integer types of the same size
and signedness are compatible under CFI.
Rust and C use the same LLVM backend for code generation, so Rust KCFI
is compatible with the KCFI used in the kernel for C. In the case of
FineIBT, CFI also depends on -Zpatchable-function-entry for rewriting
the function prologue, so we set that flag for Rust as well. The flag
for FineIBT requires rustc 1.80.0 or later, so include a Kconfig
requirement for that.
Enabling Rust will select CFI_ICALL_NORMALIZE_INTEGERS because the flag
is required to use Rust with CFI. Using select rather than `depends on`
avoids the case where Rust is not visible in menuconfig due to
CFI_ICALL_NORMALIZE_INTEGERS not being enabled. One disadvantage of
select is that RUST must `depends on` all of the things that
CFI_ICALL_NORMALIZE_INTEGERS depends on to avoid invalid configurations.
Alice has been using KCFI on her phone for several months, so it is
reasonably well tested on arm64.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Gatlin Newhouse <gatlin.newhouse@gmail.com>
Acked-by: Kees Cook <kees@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240801-kcfi-v2-2-c93caed3d121@google.com
[ Replaced `!FINEIBT` requirement with `!CALL_PADDING` to prevent
a build error on older Rust compilers. Fixed typo. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
-----BEGIN PGP SIGNATURE-----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=VwaX
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Ensure that both IPv4 and IPv6 connections are properly initialized
While we always properly initialized IPv4 connections early in their
life, we missed the necessary IPv6 change when we were adding IPv6
support.
- Annotate the SELinux inode revalidation function to quiet KCSAN
KCSAN correctly identifies a race in __inode_security_revalidate()
when we check to see if an inode's SELinux has been properly
initialized. While KCSAN is correct, it is an intentional choice made
for performance reasons; if necessary, we check the state a second
time, this time with a lock held, before initializing the inode's
state.
- Code cleanups, simplification, etc.
A handful of individual patches to simplify some SELinux kernel
logic, improve return code granularity via ERR_PTR(), follow the
guidance on using KMEM_CACHE(), and correct some minor style
problems.
* tag 'selinux-pr-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix style problems in security/selinux/include/audit.h
selinux: simplify avc_xperms_audit_required()
selinux: mark both IPv4 and IPv6 accepted connection sockets as labeled
selinux: replace kmem_cache_create() with KMEM_CACHE()
selinux: annotate false positive data race to avoid KCSAN warnings
selinux: refactor code to return ERR_PTR in selinux_netlbl_sock_genattr
selinux: Streamline type determination in security_compute_sid
-----BEGIN PGP SIGNATURE-----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=XN1y
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
- Fix some remaining problems with PID/TGID reporting
When most users think about PIDs, what they are really thinking about
is the TGID. This commit shifts the audit PID logging and filtering
to use the TGID value which should provide a more meaningful audit
stream and filtering experience for users.
- Migrate to the str_enabled_disabled() helper
Evidently we have helper functions that help ensure if we mistype
"enabled" or "disabled" it is now caught at compile time. I guess
we're fancy now.
* tag 'audit-pr-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: Make use of str_enabled_disabled() helper
audit: use task_tgid_nr() instead of task_pid_nr()
Fix an upstream merge resolution issue[1]. The NETFS_SREQ_HIT_EOF flag,
and code to set it, got added via two different paths. The original path
saw it added in the netfslib read improvements[2], but it was also added,
and slightly differently, in a fix that was committed before v6.11:
1da29f2c39
netfs, cifs: Fix handling of short DIO read
However, the code added to smb2_readv_callback() to set the flag in didn't
get removed when the netfs read improvements series was rebased to take
account of the cifs fixes. The proposed merge resolution[2] deleted it
rather than rebase the patches.
Fix this by removing the redundant lines. Code to set the bit that derives
from the fix patch is still there, a few lines above in the source.
Fixes: 35219bc5c7 ("Merge tag 'vfs-6.12.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <stfrench@microsoft.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Christian Brauner <brauner@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/CAHk-=wjr8fxk20-wx=63mZruW1LTvBvAKya1GQ1EhyzXb-okMA@mail.gmail.com/ [1]
Link: https://lore.kernel.org/linux-fsdevel/20240913-vfs-netfs-39ef6f974061@brauner/ [2]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix an upstream merge resolution issue[1]. Prior to the netfs read
healpers, the SMB1 asynchronous read callback, cifs_readv_worker()
performed the cleanup for the operation in the network message processing
loop, potentially slowing down the processing of incoming SMB messages.
With commit a68c74865f ("cifs: Fix SMB1 readv/writev callback in the same
way as SMB2/3"), this was moved to a worker thread (as is done in the
SMB2/3 transport variant). However, the "was_async" argument to
netfs_subreq_terminated (which was originally incorrectly "false" got
flipped to "true" - which was then incorrect because, being in a kernel
thread, it's not in an async context).
This got corrected in the sample merge[2], but Linus, not unreasonably,
switched it back to its previous value.
Note that this value tells netfslib whether or not it can run sleepable
stuff or stuff that takes a long time, such as retries and cleanups, in the
calling thread, or whether it should offload to a worker thread.
Fix this so that it is "false". The callback to netfslib in both SMB1 and
SMB2/3 now gets offloaded from the network message thread to a separate
worker thread and thus it's fine to do the slow work in this thread.
Fixes: 35219bc5c7 ("Merge tag 'vfs-6.12.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <stfrench@microsoft.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Christian Brauner <brauner@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/CAHk-=wjr8fxk20-wx=63mZruW1LTvBvAKya1GQ1EhyzXb-okMA@mail.gmail.com/ [1]
Link: https://lore.kernel.org/linux-fsdevel/20240913-vfs-netfs-39ef6f974061@brauner/ [2]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Putting the cpumask on the stack is deprecated for a long time (since
2d3854a37e), as these can be big. Given that, change the on-stack
allocation of allowed_mask to be dynamically allocated.
Fixes: f011c9cf04 ("io_uring/sqpoll: do not allow pinning outside of cpuset")
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Link: https://lore.kernel.org/r/20240916111150.1266191-1-felix.moessbauer@siemens.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On newer SoCs, the PWM hardware can require a power domain to operate
so add corresponding optional property.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Acked-by: Conor Dooley <conor@kernel.org>
Link: https://lore.kernel.org/r/20240710234116.2370655-2-gnstark@salutedevices.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all pwm drivers to use .remove(), with the eventual goal to drop
struct platform_driver::remove_new(). As .remove() and .remove_new() have
the same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240909073125.382040-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clock-names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240818172828.121728-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Drop the trailing comma in the terminator entry for the ID table to make
code robust against misrebases.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://lore.kernel.org/r/20240831075059.790861-3-liaochen4@huawei.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://lore.kernel.org/r/20240831075059.790861-2-liaochen4@huawei.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Use of_property_read_bool() to read boolean properties rather than
of_get_property(). This is part of a larger effort to remove callers
of of_get_property() and similar functions. of_get_property() leaks
the DT property data pointer which is a problem for dynamically
allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240731191312.1710417-25-robh@kernel.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
It turns out that OSC_EN bit in GERNERAL_CFG register has to be set to 1
when PWM state is enabled, otherwise PWM signal won't be generated.
Fixes: e9b503879f ("pwm: adp5585: Add Analog Devices ADP5585 support")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240826083337.1835405-1-victor.liu@nxp.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
The return value from the call to of_property_count_u32_elems() is int.
However, the return value is being assigned to an u32 variable
'num_outputs', so making 'num_outputs' an int.
./drivers/pwm/pwm-lp3943.c:238:6-17: WARNING: Unsigned expression compared with zero: num_outputs <= 0.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9710
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Fixes: 75f0cb339b ("pwm: lp3943: Use of_property_count_u32_elems() to get property length")
Link: https://lore.kernel.org/r/20240809080523.32717-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
The "input-events" LED trigger used to turn on the backlight LEDs had to
be rewritten to use led_trigger_register_simple() + led_trigger_event()
to fix a serious locking issue.
This means it no longer supports using blink_brightness to set a per LED
brightness for the trigger and it no longer sets LED_CORE_SUSPENDRESUME.
Adjust the MiPad 2 bottom bezel touch buttons LED class device to match:
1. Make LED_FULL the maximum brightness to fix the LED brightness
being very low when on.
2. Set flags = LED_CORE_SUSPENDRESUME.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240916090255.35548-1-hdegoede@redhat.com
start, etc.). Previously, when the stop command was sent, the
state was not updated. The fix in this pull request ensures the
driver's state is aligned with the device status.
The Intel SCH driver receives a new look, and among the cleanups,
there is a fix where, due to an oversight, an if/else statement
was missing the else, causing it to move forward instead of
exiting the function in case of an error.
The Qualcomm GENI I2C driver adds the IRQF_NO_AUTOEN flag to the
IRQ setup to prevent unwanted interrupts during probe.
The Xilinx XPS controller fixes TX FIFO handling to avoid missed
NAKs. Another fix ensures the controller is reinitialized when
the bus appears busy.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCZuQJSBYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1u8FQBAKj9535KBiOFWvoT4z4KtP6kd9xT
BEfmxxyrsUEw/rByAP4tYnNa4ZY5ULtDGUA+pEUy8uZJfeERGR1jeAw3tPsGBA==
=c4Su
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-fixes-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
The Aspeed driver tracks the controller's state (stop, pending,
start, etc.). Previously, when the stop command was sent, the
state was not updated. The fix in this pull request ensures the
driver's state is aligned with the device status.
The Intel SCH driver receives a new look, and among the cleanups,
there is a fix where, due to an oversight, an if/else statement
was missing the else, causing it to move forward instead of
exiting the function in case of an error.
The Qualcomm GENI I2C driver adds the IRQF_NO_AUTOEN flag to the
IRQ setup to prevent unwanted interrupts during probe.
The Xilinx XPS controller fixes TX FIFO handling to avoid missed
NAKs. Another fix ensures the controller is reinitialized when
the bus appears busy.
-----BEGIN PGP SIGNATURE-----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=wlzo
-----END PGP SIGNATURE-----
Merge tag 'for-6.12/io_uring-discard-20240913' of git://git.kernel.dk/linux
Pull io_uring async discard support from Jens Axboe:
"Sitting on top of both the 6.12 block and io_uring core branches,
here's support for async discard through io_uring.
This allows applications to issue async discards, rather than rely on
the blocking sync ioctl discards we already have. The sync support is
difficult to use outside of idle/cleanup periods.
On a real (but slow) device, testing shows the following results when
compared to sync discard:
qd64 sync discard: 21K IOPS, lat avg 3 msec (max 21 msec)
qd64 async discard: 76K IOPS, lat avg 845 usec (max 2.2 msec)
qd64 sync discard: 14K IOPS, lat avg 5 msec (max 25 msec)
qd64 async discard: 56K IOPS, lat avg 1153 usec (max 3.6 msec)
and synthetic null_blk testing with the same queue depth and block
size settings as above shows:
Type Trim size IOPS Lat avg (usec) Lat Max (usec)
==============================================================
sync 4k 144K 444 20314
async 4k 1353K 47 595
sync 1M 56K 1136 21031
async 1M 94K 680 760"
* tag 'for-6.12/io_uring-discard-20240913' of git://git.kernel.dk/linux:
block: implement async io_uring discard cmd
block: introduce blk_validate_byte_range()
filemap: introduce filemap_invalidate_pages
io_uring/cmd: give inline space in request to cmds
io_uring/cmd: expose iowq to cmds
-----BEGIN PGP SIGNATURE-----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=uuLl
-----END PGP SIGNATURE-----
Merge tag 'for-6.12/block-20240913' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- MD changes via Song:
- md-bitmap refactoring (Yu Kuai)
- raid5 performance optimization (Artur Paszkiewicz)
- Other small fixes (Yu Kuai, Chen Ni)
- Add a sysfs entry 'new_level' (Xiao Ni)
- Improve information reported in /proc/mdstat (Mateusz Kusiak)
- NVMe changes via Keith:
- Asynchronous namespace scanning (Stuart)
- TCP TLS updates (Hannes)
- RDMA queue controller validation (Niklas)
- Align field names to the spec (Anuj)
- Metadata support validation (Puranjay)
- A syntax cleanup (Shen)
- Fix a Kconfig linking error (Arnd)
- New queue-depth quirk (Keith)
- Add missing unplug trace event (Keith)
- blk-iocost fixes (Colin, Konstantin)
- t10-pi modular removal and fixes (Alexey)
- Fix for potential BLKSECDISCARD overflow (Alexey)
- bio splitting cleanups and fixes (Christoph)
- Deal with folios rather than rather than pages, speeding up how the
block layer handles bigger IOs (Kundan)
- Use spinlocks rather than bit spinlocks in zram (Sebastian, Mike)
- Reduce zoned device overhead in ublk (Ming)
- Add and use sendpages_ok() for drbd and nvme-tcp (Ofir)
- Fix regression in partition error pointer checking (Riyan)
- Add support for write zeroes and rotational status in nbd (Wouter)
- Add Yu Kuai as new BFQ maintainer. The scheduler has been
unmaintained for quite a while.
- Various sets of fixes for BFQ (Yu Kuai)
- Misc fixes and cleanups (Alvaro, Christophe, Li, Md Haris, Mikhail,
Yang)
* tag 'for-6.12/block-20240913' of git://git.kernel.dk/linux: (120 commits)
nvme-pci: qdepth 1 quirk
block: fix potential invalid pointer dereference in blk_add_partition
blk_iocost: make read-only static array vrate_adj_pct const
block: unpin user pages belonging to a folio at once
mm: release number of pages of a folio
block: introduce folio awareness and add a bigger size from folio
block: Added folio-ized version of bio_add_hw_page()
block, bfq: factor out a helper to split bfqq in bfq_init_rq()
block, bfq: remove local variable 'bfqq_already_existing' in bfq_init_rq()
block, bfq: remove local variable 'split' in bfq_init_rq()
block, bfq: remove bfq_log_bfqg()
block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()
block, bfq: fix procress reference leakage for bfqq in merge chain
block, bfq: fix uaf for accessing waker_bfqq after splitting
blk-throttle: support prioritized processing of metadata
blk-throttle: remove last_low_overflow_time
drbd: Add NULL check for net_conf to prevent dereference in state validation
nvme-tcp: fix link failure for TCP auth
blk-mq: add missing unplug trace event
mtip32xx: Remove redundant null pointer checks in mtip_hw_debugfs_init()
...
-----BEGIN PGP SIGNATURE-----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=ZNjL
-----END PGP SIGNATURE-----
Merge tag 'for-6.12/io_uring-20240913' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
- NAPI fixes and cleanups (Pavel, Olivier)
- Add support for absolute timeouts (Pavel)
- Fixes for io-wq/sqpoll affinities (Felix)
- Efficiency improvements for dealing with huge pages (Chenliang)
- Support for a minwait mode, where the application essentially has two
timouts - one smaller one that defines the batch timeout, and the
overall large one similar to what we had before. This enables
efficient use of batching based on count + timeout, while still
working well with periods of less intensive workloads
- Use ITER_UBUF for single segment sends
- Add support for incremental buffer consumption. Right now each
operation will always consume a full buffer. With incremental
consumption, a recv/read operation only consumes the part of the
buffer that it needs to satisfy the operation
- Add support for GCOV for io_uring, to help retain a high coverage of
test to code ratio
- Fix regression with ocfs2, where an odd -EOPNOTSUPP wasn't correctly
converted to a blocking retry
- Add support for cloning registered buffers from one ring to another
- Misc cleanups (Anuj, me)
* tag 'for-6.12/io_uring-20240913' of git://git.kernel.dk/linux: (35 commits)
io_uring: add IORING_REGISTER_COPY_BUFFERS method
io_uring/register: provide helper to get io_ring_ctx from 'fd'
io_uring/rsrc: add reference count to struct io_mapped_ubuf
io_uring/rsrc: clear 'slot' entry upfront
io_uring/io-wq: inherit cpuset of cgroup in io worker
io_uring/io-wq: do not allow pinning outside of cpuset
io_uring/rw: drop -EOPNOTSUPP check in __io_complete_rw_common()
io_uring/rw: treat -EOPNOTSUPP for IOCB_NOWAIT like -EAGAIN
io_uring/sqpoll: do not allow pinning outside of cpuset
io_uring/eventfd: move refs to refcount_t
io_uring: remove unused rsrc_put_fn
io_uring: add new line after variable declaration
io_uring: add GCOV_PROFILE_URING Kconfig option
io_uring/kbuf: add support for incremental buffer consumption
io_uring/kbuf: pass in 'len' argument for buffer commit
Revert "io_uring: Require zeroed sqe->len on provided-buffers send"
io_uring/kbuf: move io_ring_head_to_buf() to kbuf.h
io_uring/kbuf: add io_kbuf_commit() helper
io_uring/kbuf: shrink nr_iovs/mode in struct buf_sel_arg
io_uring: wire up min batch wake timeout
...
Some archs -- arm64 and s390x -- implemented chacha using instructions
that are available most places, but aren't always available. The kernel
handles this just fine, but the selftest does not. Check the hwcaps
before running, and skip the test if the cpu doesn't support it. As
well, on s390x, always emit the fallback instructions of an alternative
block, to ensure maximum compatibility.
Co-developed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Even though it's a false positive (highest channel number is "9"), refer to
"struct ep93xx_edma_data edma_m2p", we can avoid new warning by using
snprintf().
drivers/dma/ep93xx_dma.c: In function 'ep93xx_dma_of_probe':
>> drivers/dma/ep93xx_dma.c:1365:51: warning: '%u' directive writing between 1 and 8 bytes into a region of size 2 [-Wformat-overflow=]
1365 | sprintf(dma_clk_name, "m2p%u", i);
| ^~
drivers/dma/ep93xx_dma.c:1365:47: note: directive argument in the range [0, 16777216]
1365 | sprintf(dma_clk_name, "m2p%u", i);
| ^~~~~~~
drivers/dma/ep93xx_dma.c:1365:25: note: 'sprintf' output between 5 and 12 bytes into a destination of size 5
1365 | sprintf(dma_clk_name, "m2p%u", i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 4e8ad5ed845b ("dmaengine: cirrus: Convert to DT for Cirrus EP93xx")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409122133.NctarRoK-lkp@intel.com/
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This was intended to be an IS_ERR() check, not a NULL check. The
ep93xx_dma_of_probe() function doesn't return NULL pointers.
Fixes: 4e8ad5ed845b ("dmaengine: cirrus: Convert to DT for Cirrus EP93xx")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Support file-backed mounts for containers and sandboxes;
- Mark the experimental fscache backend as deprecated;
- Handle overlapped pclusters caused by crafted images properly;
- Fix a failure path which could cause infinite loops in
z_erofs_init_decompressor();
- Get rid of unnecessary NOFAILs;
- Harmless on-disk hardening & minor cleanups.
-----BEGIN PGP SIGNATURE-----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=Rmww
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"In this cycle, we add file-backed mount support, which has has been a
strong requirement for years. It is especially useful when there are
thousands of images running on the same host for containers and other
sandbox use cases, unlike OS image use cases.
Without file-backed mounts, it's hard for container runtimes to manage
and isolate so many unnecessary virtual block devices safely and
efficiently, therefore file-backed mounts are highly preferred. For
EROFS users, ComposeFS [1], containerd, and Android APEXes [2] will
directly benefit from it, and I've seen no risk in implementing it as
a completely immutable filesystem.
The previous experimental feature "EROFS over fscache" is now marked
as deprecated because:
- Fscache is no longer an independent subsystem and has been merged
into netfs, which was somewhat unexpected when it was proposed.
- New HSM "fanotify pre-content hooks" [3] will be landed upstream.
These hooks will replace "EROFS over fscache" in a simpler way, as
EROFS won't be bother with kernel caching anymore. Userspace
programs can also manage their own caching hierarchy more flexibly.
Once the HSM "fanotify pre-content hooks" is landed, I will remove the
fscache backend entirely as an internal dependency cleanup. More
backgrounds are listed in the original patchset [4].
In addition to that, there are bugfixes and cleanups as usual.
Summary:
- Support file-backed mounts for containers and sandboxes
- Mark the experimental fscache backend as deprecated
- Handle overlapped pclusters caused by crafted images properly
- Fix a failure path which could cause infinite loops in
z_erofs_init_decompressor()
- Get rid of unnecessary NOFAILs
- Harmless on-disk hardening & minor cleanups"
* tag 'erofs-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: reject inodes with negative i_size
erofs: restrict pcluster size limitations
erofs: allocate more short-lived pages from reserved pool first
erofs: sunset unneeded NOFAILs
erofs: simplify erofs_map_blocks_flatmode()
erofs: refactor read_inode calling convention
erofs: use kmemdup_nul in erofs_fill_symlink
erofs: mark experimental fscache backend deprecated
erofs: support compressed inodes for fileio
erofs: support unencoded inodes for fileio
erofs: add file-backed mount support
erofs: handle overlapped pclusters out of crafted images properly
erofs: fix error handling in z_erofs_init_decompressor
erofs: clean up erofs_register_sysfs()
erofs: fix incorrect symlink detection in fast symlink
-----BEGIN PGP SIGNATURE-----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=kDNG
-----END PGP SIGNATURE-----
Merge tag 'for-6.12-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This brings mostly refactoring, cleanups, minor performance
optimizations and usual fixes. The folio API conversions are most
noticeable.
There's one less visible change that could have a high impact. The
extent lock scope for read is reduced, not held for the entire
operation. In the buffered read case it's left to page or inode lock,
some direct io read synchronization is still needed.
This used to prevent deadlocks induced by page faults during direct
io, so there was a 4K limitation on the requests, e.g. for io_uring.
In the future this will allow smoother integration with iomap where
the extent read lock was a major obstacle.
User visible changes:
- the FSTRIM ioctl updates the processed range even after an error or
interruption
- cleaner thread is woken up in SYNC ioctl instead of waking the
transaction thread that can take some delay before waking up the
cleaner, this can speed up cleaning of deleted subvolumes
- print an error message when opening a device fail, e.g. when it's
unexpectedly read-only
Core changes:
- improved extent map handling in various ways (locking, iteration, ...)
- new assertions and locking annotations
- raid-stripe-tree locking fixes
- use xarray for tracking dirty qgroup extents, switched from rb-tree
- turn the subpage test to compile-time condition if possible (e.g.
on x86_64 with 4K pages), this allows to skip a lot of ifs and
remove dead code
- more preparatory work for compression in subpage mode
Cleanups and refactoring
- folio API conversions, many simple cases where page is passed so
switch it to folios
- more subpage code refactoring, update page state bitmap processing
- introduce auto free for btrfs_path structure, use for the simple
cases"
* tag 'for-6.12-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (110 commits)
btrfs: only unlock the to-be-submitted ranges inside a folio
btrfs: merge btrfs_folio_unlock_writer() into btrfs_folio_end_writer_lock()
btrfs: BTRFS_PATH_AUTO_FREE in orphan.c
btrfs: use btrfs_path auto free in zoned.c
btrfs: DEFINE_FREE for struct btrfs_path
btrfs: remove btrfs_folio_end_all_writers()
btrfs: constify more pointer parameters
btrfs: rework BTRFS_I as macro to preserve parameter const
btrfs: add and use helper to verify the calling task has locked the inode
btrfs: always update fstrim_range on failure in FITRIM ioctl
btrfs: convert copy_inline_to_page() to use folio
btrfs: convert btrfs_decompress() to take a folio
btrfs: convert zstd_decompress() to take a folio
btrfs: convert lzo_decompress() to take a folio
btrfs: convert zlib_decompress() to take a folio
btrfs: convert try_release_extent_mapping() to take a folio
btrfs: convert try_release_extent_state() to take a folio
btrfs: convert submit_eb_page() to take a folio
btrfs: convert submit_eb_subpage() to take a folio
btrfs: convert read_key_bytes() to take a folio
...
For feature enabling and testing purposes, allow to restore saved
or replaced VF GuC state from debugfs, bypassing normal migration
flow. This is available only under strict debug config.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912203817.1880-7-michal.wajdeczko@intel.com
For feature enabling and testing purposes, allow to view saved VF
GuC state and to replace it, but only under strict debug config.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912203817.1880-6-michal.wajdeczko@intel.com
Since usually pausing the VF is done as a first step to migrate
that VF, immediately save VF GuC state as a final step of the VF
pausing to have that data ready to export when needed.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912203817.1880-5-michal.wajdeczko@intel.com
To successfully migrate a VM with attached GPU VF we also need to
migrate VF's GuC state. Add necessary functions that interacts with
GuC to save and restore a VF GuC state. We will start using them in
upcoming patches.
Since VF migration requires many more changes in the driver, enable
those functions only under debug config.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240913120013.1924-1-michal.wajdeczko@intel.com
In upcoming patches we will add support to the PF driver to save
and restore a VF state maintained by the GuC to allow VF migration.
Add necessary H2G definitions to our GuC firmware ABI header.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912203817.1880-3-michal.wajdeczko@intel.com
Those macros rely on non-existing MAKE_VER_STRUCT macro, while the
correct one that should be used is named MAKE_GUC_VER_STRUCT.
Fixes: 4eb0aab6e4 ("drm/xe/guc: Bump minimum required GuC version to v70.29.2")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912203817.1880-2-michal.wajdeczko@intel.com
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEvgAKCRCRxhvAZXjc
onQWAQD6IxAKPU0zom2FoWNilvSzPs7WglTtvddX9pu/lT1RNAD/YC/wOLW8mvAv
9oTAmigQDQQhEWdJA9RgLZBiw7k+DAw=
=zWFb
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"This contains the work to improve read/write performance for the new
netfs library.
The main performance enhancing changes are:
- Define a structure, struct folio_queue, and a new iterator type,
ITER_FOLIOQ, to hold a buffer as a replacement for ITER_XARRAY. See
that patch for questions about naming and form.
ITER_FOLIOQ is provided as a replacement for ITER_XARRAY. The
problem with an xarray is that accessing it requires the use of a
lock (typically the RCU read lock) - and this means that we can't
supply iterate_and_advance() with a step function that might sleep
(crypto for example) without having to drop the lock between pages.
ITER_FOLIOQ is the iterator for a chain of folio_queue structs,
where each folio_queue holds a small list of folios. A folio_queue
struct is a simpler structure than xarray and is not subject to
concurrent manipulation by the VM. folio_queue is used rather than
a bvec[] as it can form lists of indefinite size, adding to one end
and removing from the other on the fly.
- Provide a copy_folio_from_iter() wrapper.
- Make cifs RDMA support ITER_FOLIOQ.
- Use folio queues in the write-side helpers instead of xarrays.
- Add a function to reset the iterator in a subrequest.
- Simplify the write-side helpers to use sheaves to skip gaps rather
than trying to work out where gaps are.
- In afs, make the read subrequests asynchronous, putting them into
work items to allow the next patch to do progressive
unlocking/reading.
- Overhaul the read-side helpers to improve performance.
- Fix the caching of a partial block at the end of a file.
- Allow a store to be cancelled.
Then some changes for cifs to make it use folio queues instead of
xarrays for crypto bufferage:
- Use raw iteration functions rather than manually coding iteration
when hashing data.
- Switch to using folio_queue for crypto buffers.
- Remove the xarray bits.
Make some adjustments to the /proc/fs/netfs/stats file such that:
- All the netfs stats lines begin 'Netfs:' but change this to
something a bit more useful.
- Add a couple of stats counters to track the numbers of skips and
waits on the per-inode writeback serialisation lock to make it
easier to check for this as a source of performance loss.
Miscellaneous work:
- Ensure that the sb_writers lock is taken around
vfs_{set,remove}xattr() in the cachefiles code.
- Reduce the number of conditional branches in netfs_perform_write().
- Move the CIFS_INO_MODIFIED_ATTR flag to the netfs_inode struct and
remove cifs_post_modify().
- Move the max_len/max_nr_segs members from netfs_io_subrequest to
netfs_io_request as they're only needed for one subreq at a time.
- Add an 'unknown' source value for tracing purposes.
- Remove NETFS_COPY_TO_CACHE as it's no longer used.
- Set the request work function up front at allocation time.
- Use bh-disabling spinlocks for rreq->lock as cachefiles completion
may be run from block-filesystem DIO completion in softirq context.
- Remove fs/netfs/io.c"
* tag 'vfs-6.12.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (25 commits)
docs: filesystems: corrected grammar of netfs page
cifs: Don't support ITER_XARRAY
cifs: Switch crypto buffer to use a folio_queue rather than an xarray
cifs: Use iterate_and_advance*() routines directly for hashing
netfs: Cancel dirty folios that have no storage destination
cachefiles, netfs: Fix write to partial block at EOF
netfs: Remove fs/netfs/io.c
netfs: Speed up buffered reading
afs: Make read subreqs async
netfs: Simplify the writeback code
netfs: Provide an iterator-reset function
netfs: Use new folio_queue data type and iterator instead of xarray iter
cifs: Provide the capability to extract from ITER_FOLIOQ to RDMA SGEs
iov_iter: Provide copy_folio_from_iter()
mm: Define struct folio_queue and ITER_FOLIOQ to handle a sequence of folios
netfs: Use bh-disabling spinlocks for rreq->lock
netfs: Set the request work function upon allocation
netfs: Remove NETFS_COPY_TO_CACHE
netfs: Reserve netfs_sreq_source 0 as unset/unknown
netfs: Move max_len/max_nr_segs from netfs_io_subrequest to netfs_io_stream
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEmwAKCRCRxhvAZXjc
otRsAQCUdlBS/ky2JiYn3ePURKYVBgRq/+PnmhRrBNDuv+ToZwD+NRLNlOM8FzQy
c8BMSq0rkwO2C5Aax3kGxgTPMEuuCwc=
=QLvm
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
"Recently, we added the ability to list mounts in other mount
namespaces and the ability to retrieve namespace file descriptors
without having to go through procfs by deriving them from pidfds.
This extends nsfs in two ways:
(1) Add the ability to retrieve information about a mount namespace
via NS_MNT_GET_INFO.
This will return the mount namespace id and the number of mounts
currently in the mount namespace. The number of mounts can be
used to size the buffer that needs to be used for listmount() and
is in general useful without having to actually iterate through
all the mounts.
The structure is extensible.
(2) Add the ability to iterate through all mount namespaces over
which the caller holds privilege returning the file descriptor
for the next or previous mount namespace.
To retrieve a mount namespace the caller must be privileged wrt
to it's owning user namespace. This means that PID 1 on the host
can list all mounts in all mount namespaces or that a container
can list all mounts of its nested containers.
Optionally pass a structure for NS_MNT_GET_INFO with
NS_MNT_GET_{PREV,NEXT} to retrieve information about the mount
namespace in one go.
(1) and (2) can be implemented for other namespace types easily.
Together with recent api additions this means one can iterate through
all mounts in all mount namespaces without ever touching procfs.
The commit message in 49224a345c ('Merge patch series "nsfs: iterate
through mount namespaces"') contains example code how to do this"
* tag 'vfs-6.12.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nsfs: iterate through mount namespaces
file: add fput() cleanup helper
fs: add put_mnt_ns() cleanup helper
fs: allow mount namespace fd
A recent commit ensured that SQPOLL cannot be setup with a CPU that
isn't in the current tasks cpuset, but it also dropped testing whether
the CPU is valid in the first place. Without that, if a task passes in
a CPU value that is too high, the following KASAN splat can get
triggered:
BUG: KASAN: stack-out-of-bounds in io_sq_offload_create+0x858/0xaa4
Read of size 8 at addr ffff800089bc7b90 by task wq-aff.t/1391
CPU: 4 UID: 1000 PID: 1391 Comm: wq-aff.t Not tainted 6.11.0-rc7-00227-g371c468f4db6 #7080
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace.part.0+0xcc/0xe0
show_stack+0x14/0x1c
dump_stack_lvl+0x58/0x74
print_report+0x16c/0x4c8
kasan_report+0x9c/0xe4
__asan_report_load8_noabort+0x1c/0x24
io_sq_offload_create+0x858/0xaa4
io_uring_setup+0x1394/0x17c4
__arm64_sys_io_uring_setup+0x6c/0x180
invoke_syscall+0x6c/0x260
el0_svc_common.constprop.0+0x158/0x224
do_el0_svc+0x3c/0x5c
el0_svc+0x34/0x70
el0t_64_sync_handler+0x118/0x124
el0t_64_sync+0x168/0x16c
The buggy address belongs to stack of task wq-aff.t/1391
and is located at offset 48 in frame:
io_sq_offload_create+0x0/0xaa4
This frame has 1 object:
[32, 40) 'allowed_mask'
The buggy address belongs to the virtual mapping at
[ffff800089bc0000, ffff800089bc9000) created by:
kernel_clone+0x124/0x7e0
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff0000d740af80 pfn:0x11740a
memcg:ffff0000c2706f02
flags: 0xbffe00000000000(node=0|zone=2|lastcpupid=0x1fff)
raw: 0bffe00000000000 0000000000000000 dead000000000122 0000000000000000
raw: ffff0000d740af80 0000000000000000 00000001ffffffff ffff0000c2706f02
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff800089bc7a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff800089bc7b00: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
>ffff800089bc7b80: 00 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
^
ffff800089bc7c00: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
ffff800089bc7c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f3
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202409161632.cbeeca0d-lkp@intel.com
Fixes: f011c9cf04 ("io_uring/sqpoll: do not allow pinning outside of cpuset")
Tested-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Correctly spelled comments make it easier for the reader to understand
the code.
Replace 'platformas' with 'platforms' in the comment &
replace 'prefere' with 'prefer' in the comment &
replace 'corresponsding' with 'corresponding' in the comment &
replace 'harizontal' with 'horizontal' in the comment.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240913061727.170198-1-yanzhen@vivo.com
The lookup_atid() function can return NULL if the ATID is
invalid or does not exist in the identifier table, which
could lead to dereferencing a null pointer without a
check in the `act_establish()` and `act_open_rpl()` functions.
Add a NULL check to prevent null pointer dereferencing.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: cfdda9d764 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC")
Signed-off-by: Mikhail Lobanov <m.lobanov@rosalinux.ru>
Link: https://patch.msgid.link/20240912145844.77516-1-m.lobanov@rosalinux.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
To simplify testing enable UCONTROL KVM by default in debug kernels.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240807154512.316936-11-schlameuss@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240807154512.316936-11-schlameuss@linux.ibm.com>
Add test case running code interacting with registers within a
ucontrol VM.
* Add uc_gprs test case
The test uses the same VM setup using the fixture and debug macros
introduced in earlier patches in this series.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240807154512.316936-7-schlameuss@linux.ibm.com
[frankja@linux.ibm.com: Removed leftover comment line]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240807154512.316936-7-schlameuss@linux.ibm.com>
There are several error cases where hns_roce_create_ah() returns
directly without jumping to sw stat path, thus leading to a problem
that the ah error counter does not increase.
Fixes: ee20cc17e9 ("RDMA/hns: Support DSCP")
Fixes: eb7854d63d ("RDMA/hns: Support SW stats with debugfs")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20240912115700.2016443-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
