Prepare ep93xx SOC gpio to convert into device tree driver:
- dropped banks and legacy defines
- split AB IRQ and make it shared
We are relying on IRQ number information A, B ports have single shared
IRQ, while F port have dedicated IRQ for each line.
Also we had to split single ep93xx platform_device into multiple, one
for each port, without this we can't do a full working transition from
legacy platform code into device tree capable. All GPIO_LOOKUP were
change to match new chip namings.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dma_supported has become too much spaghetti for my taste. Reflow it to
remove the duplicate use_dma_iommu condition and make the main path more
obvious.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Leon Romanovsky <leon@kernel.org>
Nam Cao <namcao@linutronix.de> says:
Hi,
For XIP kernel, the writable data section is always at offset specified in
XIP_OFFSET, which is hard-coded to 32MB.
Unfortunately, this means the read-only section (placed before the
writable section) is restricted in size. This causes build failure if the
kernel gets too large.
This series remove the use of XIP_OFFSET one by one, then remove this
macro entirely at the end, with the goal of lifting this size restriction.
Also some cleanup and documentation along the way.
* b4-shazam-merge
riscv: remove limit on the size of read-only section for XIP kernel
riscv: drop the use of XIP_OFFSET in create_kernel_page_table()
riscv: drop the use of XIP_OFFSET in kernel_mapping_va_to_pa()
riscv: drop the use of XIP_OFFSET in XIP_FIXUP_FLASH_OFFSET
riscv: drop the use of XIP_OFFSET in XIP_FIXUP_OFFSET
riscv: replace misleading va_kernel_pa_offset on XIP kernel
riscv: don't export va_kernel_pa_offset in vmcoreinfo for XIP kernel
riscv: cleanup XIP_FIXUP macro
riscv: change XIP's kernel_map.size to be size of the entire kernel
...
Link: https://lore.kernel.org/r/cover.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
XIP_OFFSET is the hard-coded offset of writable data section within the
kernel.
By hard-coding this value, the read-only section of the kernel (which is
placed before the writable data section) is restricted in size.
As a preparation to remove this hard-coded value entirely, stop using
XIP_OFFSET in create_kernel_page_table(). Instead use _sdata and _start to
do the same thing.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/4ea3f222a7eb9f91c04b155ff2e4d3ef19158acc.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
XIP_OFFSET is the hard-coded offset of writable data section within the
kernel.
By hard-coding this value, the read-only section of the kernel (which is
placed before the writable data section) is restricted in size.
As a preparation to remove this hard-coded macro XIP_OFFSET entirely,
remove the use of XIP_OFFSET in kernel_mapping_va_to_pa(). The macro
XIP_OFFSET is used in this case to check if the virtual address is mapped
to Flash or to RAM. The same check can be done with kernel_map.xiprom_sz.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/644c13d9467525a06f5d63d157875a35b2edb4bc.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
XIP_OFFSET is the hard-coded offset of writable data section within the
kernel.
By hard-coding this value, the read-only section of the kernel (which is
placed before the writable data section) is restricted in size.
As a preparation to remove this hard-coded macro XIP_OFFSET entirely, stop
using XIP_OFFSET in XIP_FIXUP_FLASH_OFFSET. Instead, use __data_loc and
_sdata to do the same thing.
While at it, also add a description for XIP_FIXUP_FLASH_OFFSET.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/7b3319657edd1822f3457e7e7c07aaa326cc2f87.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
XIP_OFFSET is the hard-coded offset of writable data section within the
kernel.
By hard-coding this value, the read-only section of the kernel (which is
placed before the writable data section) is restricted in size.
As a preparation to remove this hard-coded macro XIP_OFFSET entirely, stop
using XIP_OFFSET in XIP_FIXUP_OFFSET. Instead, use CONFIG_PHYS_RAM_BASE and
_sdata to do the same thing.
While at it, also add a description for XIP_FIXUP_OFFSET.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/dba0409518b14ee83b346e099b1f7f934daf7b74.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
On XIP kernel, the name "va_kernel_pa_offset" is misleading: unlike
"normal" kernel, it is not the virtual-physical address offset of kernel
mapping, it is the offset of kernel mapping's first virtual address to
first physical address in DRAM, which is not meaningful because the
kernel's first physical address is not in DRAM.
For XIP kernel, there are 2 different offsets because the read-only part of
the kernel resides in ROM while the rest is in RAM. The offset to ROM is in
kernel_map.va_kernel_xip_pa_offset, while the offset to RAM is not stored
anywhere: it is calculated on-the-fly.
Remove this confusing "va_kernel_pa_offset" and add
"va_kernel_xip_data_pa_offset" as its replacement. This new variable is the
offset of virtual mapping of the kernel's data portion to the corresponding
physical addresses.
With the introduction of this new variable, also rename
va_kernel_xip_pa_offset -> va_kernel_xip_text_pa_offset to make it clear
that this one is about the .text section.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/84e5d005c1386d88d7b2531e0b6707ec5352ee54.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The crash utility uses va_kernel_pa_offset to translate virtual addresses.
This is incorrect in the case of XIP kernel, because va_kernel_pa_offset is
not the virtual-physical address offset (yes, the name is misleading; this
variable will be removed for XIP in a following commit).
Stop exporting this variable for XIP kernel. The replacement is to be
determined, note it as a TODO for now.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/8f8760d3f9a11af4ea0acbc247e4f49ff5d317e9.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The XIP_FIXUP macro is used to fix addresses early during boot before MMU:
generated code "thinks" the data section is in ROM while it is actually in
RAM. So this macro corrects the addresses in the data section.
This macro determines if the address needs to be fixed by checking if it is
within the range starting from ROM address up to the size of (2 *
XIP_OFFSET).
This means if the kernel size is bigger than (2 * XIP_OFFSET), some
addresses would not be fixed up.
XIP kernel can still work if the above scenario does not happen. But this
macro is obviously incorrect.
Rewrite this macro to only fix up addresses within the data section.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/95f50a4ec8204ec4fcbf2a80c9addea0e0609e3b.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
bo_meminfo() wants to inspect bo state like tt and the ttm resource,
however this state can change at any point leading to stuff like NPD and
UAF, if the bo lock is not held. Grab the bo lock when calling
bo_meminfo(), ensuring we drop any spinlocks first. In the case of
object_idr we now also need to hold a ref.
v2 (MattB)
- Also add xe_bo_assert_held()
Fixes: 0845233388 ("drm/xe: Implement fdinfo memory stats printing")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911155527.178910-6-matthew.auld@intel.com
(cherry picked from commit 4f63d712fa)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There is a real deadlock as well as sleeping in atomic() bug in here, if
the bo put happens to be the last ref, since bo destruction wants to
grab the same spinlock and sleeping locks. Fix that by dropping the ref
using xe_bo_put_deferred(), and moving the final commit outside of the
lock. Dropping the lock around the put is tricky since the bo can go
out of scope and delete itself from the list, making it difficult to
navigate to the next list entry.
Fixes: 0845233388 ("drm/xe: Implement fdinfo memory stats printing")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2727
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911155527.178910-5-matthew.auld@intel.com
(cherry picked from commit 0083b8e6f1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Enable Xe2+ PES disaggregation (for OAG) to retrieve disaggregated metrics
when disaggregated data is needed. Userspace can select whether to receive
aggregated or disaggregated metrics via the particular OA configuration it
uses (programmed via DRM_XE_OBSERVATION_OP_ADD_CONFIG).
Bspec: 61101
Fixes: e936f885f1 ("drm/xe/oa/uapi: Expose OA stream fd")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909165933.2638765-1-ashutosh.dixit@intel.com
Cc: stable@vger.kernel.org
(cherry picked from commit fb2551a0e9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
It's supposed to be an open range at the end like in i915. Fingers
crossed that nobody relies on this definition.
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fe8743770694e429f6902491cdb306c97bdf701a.1724180287.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 453afb1a43)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The ret is being assigned, but not being used. Remove the assignment.
One of the reviewer mentioned that dev_warn should be replaced with
dev_info. Make this change as well.
Fixes: 1bf6dbd75f ("ASoc: mediatek: mt8365: Add a specific soundcard for EVK")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240911123629.125686-1-usama.anjum@collabora.com
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The flag of FW_ISO_CONTEXT_COMPLETIONS_CAUSE_IRQ directly causes hardIRQ
request by 1394 OHCI hardware when the corresponding isochronous packet is
transferred, however it is not so directly associated to hardIRQ
processing itself.
This commit renames the flag so that it relates to interrupt parameter of
internal packet data.
Link: https://lore.kernel.org/r/20240912133038.238786-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
There is a slight difference between fw_iso_context_flush_completions() and
fw_iso_context_schedule_flush_completions().
This commit updates the documentations for them.
Link: https://lore.kernel.org/r/20240912133038.238786-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Both IR/IT contexts use the same code to retire completed descriptors
as AT context uses.
This commit adds a helper function to reduce the duplicated codes.
Link: https://lore.kernel.org/r/20240912133038.238786-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
This reverts commit 767bfb9ef27ebf760290d9f8bc303828b018c312. It appears
that the call of ohci_flush_iso_completions() in the work item scheduled
by hardIRQ of 1394 OHCI for any isochronous context changes the timing to
queue events in the view of user space application.
Link: https://lore.kernel.org/r/20240912133038.238786-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
-----BEGIN PGP SIGNATURE-----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=Oc51
-----END PGP SIGNATURE-----
Merge tag 'nf-24-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains two fixes from Florian Westphal:
Patch #1 fixes a sk refcount leak in nft_socket on mismatch.
Patch #2 fixes cgroupsv2 matching from containers due to incorrect
level in subtree.
netfilter pull request 24-09-12
* tag 'nf-24-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_socket: make cgroupsv2 matching work with namespaces
netfilter: nft_socket: fix sk refcount leaks
====================
Link: https://patch.msgid.link/20240911222520.3606-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Export kernel paravirt features to user space, so that VMM can control
each single paravirt feature. By default paravirt features will be the
same with kvm supported features if VMM does not set it.
Also a new feature KVM_FEATURE_VIRT_EXTIOI is added which can be set
from user space. This feature indicates that the virt EIOINTC can route
interrupts to 256 vCPUs, rather than 4 vCPUs like with real HW.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
On LoongArch, the host and guest have their own PMU CSRs registers and
they share PMU hardware resources. A set of PMU CSRs consists of a CTRL
register and a CNTR register. We can set which PMU CSRs are used by the
guest by writing to the GCFG register [24:26] bits.
On KVM side:
- Save the host PMU CSRs into structure kvm_context.
- If the host supports the PMU feature.
- When entering guest mode, save the host PMU CSRs and restore the guest PMU CSRs.
- When exiting guest mode, save the guest PMU CSRs and restore the host PMU CSRs.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
25216afc9d ("PCI: Add managed pcim_intx()") moved the allocation step for
pci_intx()'s device resource from pcim_enable_device() to pcim_intx(). As
before, pcim_enable_device() sets pci_dev.is_managed to true; and it is
never set to false again.
Due to the lifecycle of a struct pci_dev, it can happen that a second
driver obtains the same pci_dev after a first driver ran. If one driver
uses pcim_enable_device() and the other doesn't, this causes the other
driver to run into managed pcim_intx(), which will try to allocate when
called for the first time.
Allocations might sleep, so calling pci_intx() while holding spinlocks
becomes then invalid, which causes lockdep warnings and could cause
deadlocks:
========================================================
WARNING: possible irq lock inversion dependency detected
6.11.0-rc6+ #59 Tainted: G W
--------------------------------------------------------
CPU 0/KVM/1537 just changed the state of lock:
ffffa0f0cff965f0 (&vdev->irqlock){-...}-{2:2}, at:
vfio_intx_handler+0x21/0xd0 [vfio_pci_core] but this lock took another,
HARDIRQ-unsafe lock in the past: (fs_reclaim){+.+.}-{0:0}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
local_irq_disable();
lock(&vdev->irqlock);
lock(fs_reclaim);
<Interrupt>
lock(&vdev->irqlock);
*** DEADLOCK ***
Have pcim_enable_device()'s release function, pcim_disable_device(), set
pci_dev.is_managed to false so that subsequent drivers using the same
struct pci_dev do not implicitly run into managed code.
Link: https://lore.kernel.org/r/20240905072556.11375-2-pstanner@redhat.com
Fixes: 25216afc9d ("PCI: Add managed pcim_intx()")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Closes: https://lore.kernel.org/all/20240903094431.63551744.alex.williamson@redhat.com/
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
* for-next/selftests:
kselftest/arm64: Fix build warnings for ptrace
kselftest/arm64: Actually test SME vector length changes via sigreturn
kselftest/arm64: signal: fix/refactor SVE vector length enumeration
* for-next/poe: (31 commits)
arm64: pkeys: remove redundant WARN
kselftest/arm64: Add test case for POR_EL0 signal frame records
kselftest/arm64: parse POE_MAGIC in a signal frame
kselftest/arm64: add HWCAP test for FEAT_S1POE
selftests: mm: make protection_keys test work on arm64
selftests: mm: move fpregs printing
kselftest/arm64: move get_header()
arm64: add Permission Overlay Extension Kconfig
arm64: enable PKEY support for CPUs with S1POE
arm64: enable POE and PIE to coexist
arm64/ptrace: add support for FEAT_POE
arm64: add POE signal support
arm64: implement PKEYS support
arm64: add pte_access_permitted_no_overlay()
arm64: handle PKEY/POE faults
arm64: mask out POIndex when modifying a PTE
arm64: convert protection key into vm_flags and pgprot values
arm64: add POIndex defines
arm64: re-order MTE VM_ flags
arm64: enable the Permission Overlay Extension for EL0
...
* for-next/pkvm-guest:
arm64: smccc: Reserve block of KVM "vendor" services for pKVM hypercalls
drivers/virt: pkvm: Intercept ioremap using pKVM MMIO_GUARD hypercall
arm64: mm: Add confidential computing hook to ioremap_prot()
drivers/virt: pkvm: Hook up mem_encrypt API using pKVM hypercalls
arm64: mm: Add top-level dispatcher for internal mem_encrypt API
drivers/virt: pkvm: Add initial support for running as a protected guest
firmware/smccc: Call arch-specific hook on discovering KVM services
* for-next/mm:
arm64/mm: use lm_alias() with addresses passed to memblock_free()
mm: arm64: document why pte is not advanced in contpte_ptep_set_access_flags()
arm64: Expose the end of the linear map in PHYSMEM_END
arm64: trans_pgd: mark PTEs entries as valid to avoid dead kexec()
arm64/mm: Delete __init region from memblock.reserved
* for-next/misc:
arm64: hibernate: Fix warning for cast from restricted gfp_t
arm64: esr: Define ESR_ELx_EC_* constants as UL
arm64: Constify struct kobj_type
arm64: smp: smp_send_stop() and crash_smp_send_stop() should try non-NMI first
arm64/sve: Remove unused declaration read_smcr_features()
arm64: mm: Remove unused declaration early_io_map()
arm64: el2_setup.h: Rename some labels to be more diff-friendly
arm64: signal: Fix some under-bracketed UAPI macros
arm64/mm: Drop TCR_SMP_FLAGS
arm64/mm: Drop PMD_SECT_VALID
* for-next/acpi:
ACPI/IORT: Add PMCG platform information for HiSilicon HIP10/11
ACPI: ARM64: add acpi_iort.h to MAINTAINERS
ACPI/IORT: Switch to use kmemdup_array()
Some lock managers (NLM, kNFSD) fastidiously avoid blocking their
kernel threads while servicing blocking locks. If a filesystem supports
asynchronous lock requests those lock managers can use notifications to
quickly inform clients they have acquired a file lock.
Historically, only posix_lock_file() was capable of supporting asynchronous
locks so the check for support was simply file_operations->lock(), but with
recent changes in DLM, both GFS2 and OCFS2 also support asynchronous locks
and have started signalling their support with EXPORT_OP_ASYNC_LOCK.
We recently noticed that those changes dropped the checks for whether a
filesystem simply defaults to posix_lock_file(), so async lock
notifications have not been attempted for NLM and NFSv4.1+ for most
filesystems. While trying to fix this it has become clear that testing
both the export flag combined with testing ->lock() creates quite a
layering mess. It seems appropriate to signal support with a fop_flag.
Add FOP_ASYNC_LOCK so that filesystems with ->lock() can signal their
capability to handle lock requests asynchronously. Add a helper for
lock managers to properly test that support.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Link: https://lore.kernel.org/r/3330d5a324abe2ce9c1dafe89cacdc6db41945d1.1726083391.git.bcodding@redhat.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Adding HDMI-In capture support for the ARL products which doesn't have
onboard I2S codec. But need to support HDMI-In capture via I2S and
audio playback through HDMI/DP monitor.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240912120308.134762-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Added match table entry on arl machines to support HDMI-In capture
with rt5682 I2S audio codec. also added the respective quirk
configuration in rt5682 machine driver.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240912120308.134762-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not set common_hdmi_codec_drv in SOF platform driver since no
machine driver needs it. Remove member variable common_hdmi_codec_drv
from snd_soc_acpi_mach_params structure.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240912120308.134762-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable common_hdmi_codec_drv is always true on SOF platform so
we could remove the reference in machine driver.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240912120308.134762-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable common_hdmi_codec_drv is always true on SOF platform so
we could remove the reference in machine driver.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240912120308.134762-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module to create DAI link array for Intel iDisp HDMI,
HDA external codec, DMIC01, DMIC16K, and BT audio offload DAI BE links.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240912120308.134762-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
