The KEBA I2C controller is found in the system FPGA of KEBA PLC devices.
It is used to connect EEPROMs and hardware monitoring chips. The
It is a simple I2C controller with a fixed bus speed of 100 kbit/s. The
whole message transmission is executed by the driver. The driver
triggers all steps over control, status and data register. There are no
FIFOs or interrupts.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
- Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() in the ST
driver and add a Kconfig dependency on THERMAL_OF subsystem for the
STi driver (Raphael Gallais-Pou)
- Simplify with dev_err_probe() the error code path in the probe
functions for the brcmstb driver (Yan Zhen)
- Remove trailing space after \n newline in the Renesas driver (Colin
Ian King)
- Add DT binding compatible string for the SA8255p with the tsens
driver (Nikunj Kela)
- Use the devm_clk_get_enabled() helpers to simplify the init routine
in the sprd driver (Huan Yang)
- Remove __maybe_unused notations for the functions by using the new
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros on the IMx and
Qoriq drivers (Fabio Estevam)
- Remove unused declarations in the header file as the functions were
removed in a previous change on the ti-soc-thermal driver (Zhang
Zekun)
- Simplify with dev_err_probe() the error code path in the probe
functions for the imx_sc_thermal driver (Alexander Stein)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmba5PkACgkQqDIjiipP
6E+8JQgAhaU8DhKMKHDG8sGPC6LSFIrssIZoGJ4T+POEEyHNRFP90f1c+tyO20st
ScWi6jomj6EySotfs5X6MJzXhIABIw54OArL9sny0xUBC0Y1V008pjq3QJrMICbn
HWz8OnEcpMh+3d/fsP82vjv59AJp3EJjmOjtg5rTEwNTI4ZkanM7zUoAykCf07Ui
w3n4IO8Bu6GlU83FtLB72ePmXqggNN0a4pejGxb/vNSB5rwHBWxyBEQRJmcdg9Ic
ZbFD2Hyr9tNxEJQzqlI6hoqPj25y4SeP61PkWM47S4zW3tXv0oicNFDXj8WJKzpo
waOg0Q6Igen7hyC2XQzKQ7VSQF07gw==
=+d7/
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux into
Merge thermal drivers changes for v6.12-rc1 from Daniel Lezcano:
"- Add power domain DT bindings for new Amlogic SoCs (Georges Stark)
- Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() in the ST
driver and add a Kconfig dependency on THERMAL_OF subsystem for the
STi driver (Raphael Gallais-Pou)
- Simplify with dev_err_probe() the error code path in the probe
functions for the brcmstb driver (Yan Zhen)
- Remove trailing space after \n newline in the Renesas driver (Colin
Ian King)
- Add DT binding compatible string for the SA8255p with the tsens
driver (Nikunj Kela)
- Use the devm_clk_get_enabled() helpers to simplify the init routine
in the sprd driver (Huan Yang)
- Remove __maybe_unused notations for the functions by using the new
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros on the IMx and
Qoriq drivers (Fabio Estevam)
- Remove unused declarations in the header file as the functions were
removed in a previous change on the ti-soc-thermal driver (Zhang
Zekun)
- Simplify with dev_err_probe() the error code path in the probe
functions for the imx_sc_thermal driver (Alexander Stein)"
* tag 'thermal-v6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/imx_sc_thermal: Use dev_err_probe
thermal/drivers/ti-soc-thermal: Remove unused declarations
thermal/drivers/imx: Remove __maybe_unused notations
thermal/drivers/qoriq: Remove __maybe_unused notations
thermal/drivers/sprd: Use devm_clk_get_enabled() helpers
dt-bindings: thermal: tsens: document support on SA8255p
thermal/drivers/renesas: Remove trailing space after \n newline
thermal/drivers/brcmstb_thermal: Simplify with dev_err_probe()
thermal/drivers/sti: Depend on THERMAL_OF subsystem
thermal/drivers/st: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
dt-bindings: thermal: amlogic,thermal: add optional power-domains
I have done a lot of analysis for these type of devices and collaborated
quite a bit with Nick Weihs (author of the first patch submitted for this
including adding samsung_helper.c). More information can be found in the
issue on Github [1] including additional rationale and testing.
The existing implementation includes a large number of equalizer coef
values that are not necessary to actually init and enable the speaker
amps, as well as create a somewhat worse sound profile. Users have
reported "muffled" or "muddy" sound; more information about this including
my analysis of the differences can be found in the linked Github issue.
This patch refactors the "v2" version of ALC298_FIXUP_SAMSUNG_AMP to a much
simpler implementation which removes the new samsung_helper.c, reuses more
of the existing patch_realtek.c, and sends significantly fewer unnecessary
coef values (including removing all of these EQ-specific coef values).
A pcm_playback_hook is used to dynamically enable and disable the speaker
amps only when there will be audio playback; this is to match the behavior
of how the driver for these devices is working in Windows, and is
suspected but not yet tested or confirmed to help with power consumption.
Support for models with 2 speaker amps vs 4 speaker amps is controlled by
a specific quirk name for both types. A new int num_speaker_amps has been
added to alc_spec so that the hooks can know how many speaker amps to
enable or disable. This design was chosen to limit the number of places
that subsystem ids will need to be maintained: like this, they can be
maintained only once in the quirk table and there will not be another
separate list of subsystem ids to maintain elsewhere in the code.
Also updated the quirk name from ALC298_FIXUP_SAMSUNG_AMP2 to
ALC298_FIXUP_SAMSUNG_AMP_V2_.. as this is not a quirk for "Amp #2" on
ALC298 but is instead a different version of how to handle it.
More devices have been added (see Github issue for testing confirmation),
as well as a small cleanup to existing names.
[1]: https://github.com/thesofproject/linux/issues/4055#issuecomment-2323411911
Signed-off-by: Joshua Grisham <josh@joshuagrisham.com>
Link: https://patch.msgid.link/20240909193000.838815-1-josh@joshuagrisham.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Vaio VJFH52 is equipped with ACL256, and needs a
fix to make the internal mic and headphone mic to work.
Also must to limits the internal microphone boost.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://patch.msgid.link/20240909162751.4790-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of having max_pfn as a local variable of xen_memory_setup(),
make it a static variable in setup.c instead. This avoids having to
pass it to subfunctions, which will be needed in more cases in future.
Rename it to ini_nr_pages, as the value denotes the currently usable
number of memory pages as passed from the hypervisor at boot time.
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Move the checks for e820 memory map conflicts using the
xen_chk_is_e820_usable() helper further up in order to prepare
resolving some of the possible conflicts by doing some e820 map
modifications, which must happen before evaluating the RAM layout.
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
When booting as a Xen PV dom0 the memory layout of the dom0 is
modified to match that of the host, as this requires less changes in
the kernel for supporting Xen.
There are some cases, though, which are problematic, as it is the Xen
hypervisor selecting the kernel's load address plus some other data,
which might conflict with the host's memory map.
These conflicts are detected at boot time and result in a boot error.
In order to support handling at least some of these conflicts in
future, introduce a generic helper function which will later gain the
ability to adapt the memory layout when possible.
Add the missing check for the xen_start_info area.
Note that possible p2m map and initrd memory conflicts are handled
already by copying the data to memory areas not conflicting with the
memory map. The initial stack allocated by Xen doesn't need to be
checked, as early boot code is switching to the statically allocated
initial kernel stack. Initial page tables and the kernel itself will
be handled later.
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
When running as a Xen PV dom0 the kernel is loaded by the hypervisor
using a different memory map than that of the host. In order to
minimize the required changes in the kernel, the kernel adapts its
memory map to that of the host. In order to do that it is checking
for conflicts of its load address with the host memory map.
Unfortunately the tested memory range does not include the .brk
area, which might result in crashes or memory corruption when this
area does conflict with the memory map of the host.
Fix the test by using the _end label instead of __bss_stop.
Fixes: 808fdb7193 ("xen: check for kernel memory conflicting with memory layout")
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Remove delayed tasks from util_est even they are runnable.
Exclude delayed task which are (a) migrating between rq's or (b) in a
SAVE/RESTORE dequeue/enqueue.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/c49ef5fe-a909-43f1-b02f-a765ab9cedbf@arm.com
When analyzing a kernel waring message, Peter pointed out that there is a race
condition when the kworker is being frozen and falls into try_to_freeze() with
TASK_INTERRUPTIBLE, which could trigger a might_sleep() warning in try_to_freeze().
Although the root cause is not related to freeze()[1], it is still worthy to fix
this issue ahead.
One possible race scenario:
CPU 0 CPU 1
----- -----
// kthread_worker_fn
set_current_state(TASK_INTERRUPTIBLE);
suspend_freeze_processes()
freeze_processes
static_branch_inc(&freezer_active);
freeze_kernel_threads
pm_nosig_freezing = true;
if (work) { //false
__set_current_state(TASK_RUNNING);
} else if (!freezing(current)) //false, been frozen
freezing():
if (static_branch_unlikely(&freezer_active))
if (pm_nosig_freezing)
return true;
schedule()
}
// state is still TASK_INTERRUPTIBLE
try_to_freeze()
might_sleep() <--- warning
Fix this by explicitly set the TASK_RUNNING before entering
try_to_freeze().
Fixes: b56c0d8937 ("kthread: implement kthread_worker")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/Zs2ZoAcUsZMX2B%2FI@chenyu5-mobl2/ [1]
commit 97450eb909 ("sched/pelt: Remove shift of thermal clock")
removed the decay_shift for hw_pressure. This commit uses the
sched_clock_task() in sched_tick() while it replaces the
sched_clock_task() with rq_clock_pelt() in __update_blocked_others().
This could bring inconsistence. One possible scenario I can think of
is in ___update_load_sum():
u64 delta = now - sa->last_update_time
'now' could be calculated by rq_clock_pelt() from
__update_blocked_others(), and last_update_time was calculated by
rq_clock_task() previously from sched_tick(). Usually the former
chases after the latter, it cause a very large 'delta' and brings
unexpected behavior.
Fixes: 97450eb909 ("sched/pelt: Remove shift of thermal clock")
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Hongyan Xia <hongyan.xia2@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20240827112607.181206-1-yu.c.chen@intel.com
Move effective_cpu_util() and sched_cpu_util() functions in fair.c file
with others utilization related functions.
No functional change.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240904092417.20660-1-vincent.guittot@linaro.org
Since commit b2a02fc43a ("smp: Optimize
send_call_function_single_ipi()") an idle CPU in TIF_POLLING_NRFLAG mode
can be pulled out of idle by setting TIF_NEED_RESCHED flag to service an
IPI without actually sending an interrupt. Even in cases where the IPI
handler does not queue a task on the idle CPU, do_idle() will call
__schedule() since need_resched() returns true in these cases.
Introduce and use SM_IDLE to identify call to __schedule() from
schedule_idle() and shorten the idle re-entry time by skipping
pick_next_task() when nr_running is 0 and the previous task is the idle
task.
With the SM_IDLE fast-path, the time taken to complete a fixed set of
IPIs using ipistorm improves noticeably. Following are the numbers
from a dual socket Intel Ice Lake Xeon server (2 x 32C/64T) and
3rd Generation AMD EPYC system (2 x 64C/128T) (boost on, C2 disabled)
running ipistorm between CPU8 and CPU16:
cmdline: insmod ipistorm.ko numipi=100000 single=1 offset=8 cpulist=8 wait=1
==================================================================
Test : ipistorm (modified)
Units : Normalized runtime
Interpretation: Lower is better
Statistic : AMean
======================= Intel Ice Lake Xeon ======================
kernel: time [pct imp]
tip:sched/core 1.00 [baseline]
tip:sched/core + SM_IDLE 0.80 [20.51%]
==================== 3rd Generation AMD EPYC =====================
kernel: time [pct imp]
tip:sched/core 1.00 [baseline]
tip:sched/core + SM_IDLE 0.90 [10.17%]
==================================================================
[ kprateek: Commit message, SM_RTLOCK_WAIT fix ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Not-yet-signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240809092240.6921-1-kprateek.nayak@amd.com
Get rid of redundant variables (nblocks, offset) and a dead branch
(!tailendpacking).
Signed-off-by: Hongzhen Luo <hongzhen@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20240905030339.1474396-1-hongzhen@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Refactor out the iop binding behavior out of the erofs_fill_symlink
and move erofs_buf into the erofs_read_inode, so that erofs_fill_inode
can only deal with inode operation bindings and can be decoupled from
metabuf operations. This results in better calling conventions.
Note that after this patch, we do not need erofs_buf and ofs as
parameters any more when calling erofs_read_inode as
all the data operations are now included in itself.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/all/20240425222847.GN2118490@ZenIV/
Signed-off-by: Yiyang Wu <toolmanp@tlmp.cc>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20240902093412.509083-1-toolmanp@tlmp.cc
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Although fscache is still described as "General Filesystem Caching" for
network filesystems and other things such as ISO9660 filesystems, it has
actually become a part of netfslib recently, which was unexpected at the
time when "EROFS over fscache" proposed (2021) since EROFS is entirely a
disk filesystem and the dependency is redundant.
Mark it deprecated and it will be removed after "fanotify pre-content
hooks" lands, which will provide the same functionality for EROFS.
Reviewed-by: Sandeep Dhavale <dhavale@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240830032840.3783206-4-hsiangkao@linux.alibaba.com
Use pseudo bios just like the previous fscache approach since
merged bio_vecs can be filled properly with unique interfaces.
Reviewed-by: Sandeep Dhavale <dhavale@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240830032840.3783206-3-hsiangkao@linux.alibaba.com
Since EROFS only needs to handle read requests in simple contexts,
Just directly use vfs_iocb_iter_read() for data I/Os.
Reviewed-by: Sandeep Dhavale <dhavale@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240905093031.2745929-1-hsiangkao@linux.alibaba.com
It actually has been around for years: For containers and other sandbox
use cases, there will be thousands (and even more) of authenticated
(sub)images running on the same host, unlike OS images.
Of course, all scenarios can use the same EROFS on-disk format, but
bdev-backed mounts just work well for OS images since golden data is
dumped into real block devices. However, it's somewhat hard for
container runtimes to manage and isolate so many unnecessary virtual
block devices safely and efficiently [1]: they just look like a burden
to orchestrators and file-backed mounts are preferred indeed. There
were already enough attempts such as Incremental FS, the original
ComposeFS and PuzzleFS acting in the same way for immutable fses. As
for current EROFS users, ComposeFS, containerd and Android APEXs will
be directly benefited from it.
On the other hand, previous experimental feature "erofs over fscache"
was once also intended to provide a similar solution (inspired by
Incremental FS discussion [2]), but the following facts show file-backed
mounts will be a better approach:
- Fscache infrastructure has recently been moved into new Netfslib
which is an unexpected dependency to EROFS really, although it
originally claims "it could be used for caching other things such as
ISO9660 filesystems too." [3]
- It takes an unexpectedly long time to upstream Fscache/Cachefiles
enhancements. For example, the failover feature took more than
one year, and the deamonless feature is still far behind now;
- Ongoing HSM "fanotify pre-content hooks" [4] together with this will
perfectly supersede "erofs over fscache" in a simpler way since
developers (mainly containerd folks) could leverage their existing
caching mechanism entirely in userspace instead of strictly following
the predefined in-kernel caching tree hierarchy.
After "fanotify pre-content hooks" lands upstream to provide the same
functionality, "erofs over fscache" will be removed then (as an EROFS
internal improvement and EROFS will not have to bother with on-demand
fetching and/or caching improvements anymore.)
[1] https://github.com/containers/storage/pull/2039
[2] https://lore.kernel.org/r/CAOQ4uxjbVxnubaPjVaGYiSwoGDTdpWbB=w_AeM6YM=zVixsUfQ@mail.gmail.com
[3] https://docs.kernel.org/filesystems/caching/fscache.html
[4] https://lore.kernel.org/r/cover.1723670362.git.josef@toxicpanda.com
Closes: https://github.com/containers/composefs/issues/144
Reviewed-by: Sandeep Dhavale <dhavale@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240830032840.3783206-1-hsiangkao@linux.alibaba.com
syzbot reported a task hang issue due to a deadlock case where it is
waiting for the folio lock of a cached folio that will be used for
cache I/Os.
After looking into the crafted fuzzed image, I found it's formed with
several overlapped big pclusters as below:
Ext: logical offset | length : physical offset | length
0: 0.. 16384 | 16384 : 151552.. 167936 | 16384
1: 16384.. 32768 | 16384 : 155648.. 172032 | 16384
2: 32768.. 49152 | 16384 : 537223168.. 537239552 | 16384
...
Here, extent 0/1 are physically overlapped although it's entirely
_impossible_ for normal filesystem images generated by mkfs.
First, managed folios containing compressed data will be marked as
up-to-date and then unlocked immediately (unlike in-place folios) when
compressed I/Os are complete. If physical blocks are not submitted in
the incremental order, there should be separate BIOs to avoid dependency
issues. However, the current code mis-arranges z_erofs_fill_bio_vec()
and BIO submission which causes unexpected BIO waits.
Second, managed folios will be connected to their own pclusters for
efficient inter-queries. However, this is somewhat hard to implement
easily if overlapped big pclusters exist. Again, these only appear in
fuzzed images so let's simply fall back to temporary short-lived pages
for correctness.
Additionally, it justifies that referenced managed folios cannot be
truncated for now and reverts part of commit 2080ca1ed3 ("erofs: tidy
up `struct z_erofs_bvec`") for simplicity although it shouldn't be any
difference.
Reported-by: syzbot+4fc98ed414ae63d1ada2@syzkaller.appspotmail.com
Reported-by: syzbot+de04e06b28cfecf2281c@syzkaller.appspotmail.com
Reported-by: syzbot+c8c8238b394be4a1087d@syzkaller.appspotmail.com
Tested-by: syzbot+4fc98ed414ae63d1ada2@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/0000000000002fda01061e334873@google.com
Fixes: 8e6c8fa9f2 ("erofs: enable big pcluster feature")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240910070847.3356592-1-hsiangkao@linux.alibaba.com
It may be possible for the sum of the values derived from
i915_ggtt_offset() and __get_parent_scratch_offset()/
i915_ggtt_offset() to go over the u32 limit before being assigned
to wq offsets of u64 type.
Mitigate these issues by expanding one of the right operands
to u64 to avoid any overflow issues just in case.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: c2aa552ff0 ("drm/i915/guc: Add multi-lrc context registration")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patchwork.freedesktop.org/patch/msgid/20240725155925.14707-1-n.zhandarovich@fintech.ru
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 1f1c1bd566)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Add the function to support setting the MAC address.
For vdpa/mlx5, the function will use mlx5_mpfs_add_mac
to set the mac address
Tested in ConnectX-6 Dx device
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20240731031653.1047692-4-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Add the function to support setting the MAC address.
For vdpa_sim_net, the driver will write the MAC address
to the config space, and other devices can implement
their own functions to support this.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20240731031653.1047692-3-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Add new UAPI to support the mac address from vdpa tool
Function vdpa_nl_cmd_dev_attr_set_doit() will get the
new MAC address from the vdpa tool and then set it to the device.
The usage is: vdpa dev set name vdpa_name mac **:**:**:**:**:**
Here is example:
root@L1# vdpa -jp dev config show vdpa0
{
"config": {
"vdpa0": {
"mac": "82:4d:e9:5d:d7:e6",
"link ": "up",
"link_announce ": false,
"mtu": 1500
}
}
}
root@L1# vdpa dev set name vdpa0 mac 00:11:22:33:44:55
root@L1# vdpa -jp dev config show vdpa0
{
"config": {
"vdpa0": {
"mac": "00:11:22:33:44:55",
"link ": "up",
"link_announce ": false,
"mtu": 1500
}
}
}
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20240731031653.1047692-2-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
The unsigned int should use "%u" instead of "%d".
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Message-Id: <20240724074108.9530-1-zhujun2@cmss.chinamobile.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Expose memory scan/reclaim information to the host side via virtio
balloon device.
Now we have a metric to analyze the memory performance:
y: counter increases
n: counter does not changes
h: the rate of counter change is high
l: the rate of counter change is low
OOM: VIRTIO_BALLOON_S_OOM_KILL
STALL: VIRTIO_BALLOON_S_ALLOC_STALL
ASCAN: VIRTIO_BALLOON_S_SCAN_ASYNC
DSCAN: VIRTIO_BALLOON_S_SCAN_DIRECT
ARCLM: VIRTIO_BALLOON_S_RECLAIM_ASYNC
DRCLM: VIRTIO_BALLOON_S_RECLAIM_DIRECT
- OOM[y], STALL[*], ASCAN[*], DSCAN[*], ARCLM[*], DRCLM[*]:
the guest runs under really critial memory pressure
- OOM[n], STALL[h], ASCAN[*], DSCAN[l], ARCLM[*], DRCLM[l]:
the memory allocation stalls due to cgroup, not the global memory
pressure.
- OOM[n], STALL[h], ASCAN[*], DSCAN[h], ARCLM[*], DRCLM[h]:
the memory allocation stalls due to global memory pressure. The
performance gets hurt a lot. A high ratio between DRCLM/DSCAN shows
quite effective memory reclaiming.
- OOM[n], STALL[h], ASCAN[*], DSCAN[h], ARCLM[*], DRCLM[l]:
the memory allocation stalls due to global memory pressure.
the ratio between DRCLM/DSCAN gets low, the guest OS is thrashing
heavily, the serious case leads poor performance and difficult
trouble shooting. Ex, sshd may block on memory allocation when
accepting new connections, a user can't login a VM by ssh command.
- OOM[n], STALL[n], ASCAN[h], DSCAN[n], ARCLM[l], DRCLM[n]:
the low ratio between ARCLM/ASCAN shows that the guest tries to
reclaim more memory, but it can't. Once more memory is required in
future, it will struggle to reclaim memory.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20240423034109.1552866-5-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Memory allocation stall counter represents the performance/latency of
memory allocation, expose this counter to the host side by virtio
balloon device via out-of-bound way.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20240423034109.1552866-4-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the guest OS runs under critical memory pressure, the guest
starts to kill processes. A guest monitor agent may scan 'oom_kill'
from /proc/vmstat, and reports the OOM KILL event. However, the agent
may be killed and we will loss this critical event(and the later
events).
For now we can also grep for magic words in guest kernel log from host
side. Rather than this unstable way, virtio balloon reports OOM-KILL
invocations instead.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20240423034109.1552866-3-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If a pmem device is in a bad status, the driver side could wait for
host ack forever in virtio_pmem_flush(), causing the system to hang.
So add a status check in the beginning of virtio_pmem_flush() to return
early if the device is not activated.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Message-Id: <20240826215313.2673566-1-philipchen@chromium.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com
We used to call irq_bypass_unregister_producer() in
vhost_vdpa_setup_vq_irq() which is problematic as we don't know if the
token pointer is still valid or not.
Actually, we use the eventfd_ctx as the token so the life cycle of the
token should be bound to the VHOST_SET_VRING_CALL instead of
vhost_vdpa_setup_vq_irq() which could be called by set_status().
Fixing this by setting up irq bypass producer's token when handling
VHOST_SET_VRING_CALL and un-registering the producer before calling
vhost_vring_ioctl() to prevent a possible use after free as eventfd
could have been released in vhost_vring_ioctl(). And such registering
and unregistering will only be done if DRIVER_OK is set.
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Fixes: 2cf1ba9a4d ("vhost_vdpa: implement IRQ offloading in vhost_vdpa")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240816031900.18013-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ia_css_eed1_8_vmem_encode() is assigning values with a range of -8192 -
8191 to e_dew_enh_y and e_dew_enh_a both of which are of the VMEM_ARRAY
type which maps to u16.
This causes the following smatch warnings:
drivers/staging/media/atomisp/pci/isp/kernels/eed1_8/ia_css_eed1_8.host.c: drivers/staging/media/atomisp/pci/isp/kernels/eed1_8/ia_css_eed1_8.host.c:177 ia_css_eed1_8_vmem_encode() warn: assigning (-8192) to unsigned variable 'to->e_dew_enh_y[0][base + j]'
drivers/staging/media/atomisp/pci/isp/kernels/eed1_8/ia_css_eed1_8.host.c: drivers/staging/media/atomisp/pci/isp/kernels/eed1_8/ia_css_eed1_8.host.c:182 ia_css_eed1_8_vmem_encode() warn: assigning (-8192) to unsigned variable 'to->e_dew_enh_a[0][base + j]'
Convert the e_dew_enh_y and e_dew_enh_a arrays to a new SVMEM_ARRAY type
which maps to s16 to fix this.
Link: https://lore.kernel.org/linux-media/20240907111701.8493-1-hdegoede@redhat.com
Reported-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Closes: https://lore.kernel.org/linux-media/20240906081542.5cb0c142@foz.lan/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When building the Linux kernel on an aarch64 macOS based host, if we don't
specify a value for ARCH when invoking make, we default to arm and thus
multi_v7_defconfig rather than the expected arm64 and arm64's defconfig.
This is because subarch.include invokes `uname -m` which on MacOS hosts
evaluates to `arm64` but on Linux hosts evaluates to `aarch64`,
This allows us to build ARCH=arm64 natively on macOS (as in ARCH need
not be specified on an aarch64-based system).
Avoid matching arm64 by excluding it from the arm.* sed expression.
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Suggested-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When debugging drivers, it can often be useful to trace when memory gets
(un)mapped for DMA (and can be accessed by the device). Add some
tracepoints for this purpose.
Use u64 instead of phys_addr_t and dma_addr_t (and similarly %llx instead
of %pa) because libtraceevent can't handle typedefs in all cases.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Set PFERR_GUEST_{FINAL,PAGE}_MASK based on EPT_VIOLATION_GVA_TRANSLATED if
and only if EPT_VIOLATION_GVA_IS_VALID is also set in exit qualification.
Per the SDM, bit 8 (EPT_VIOLATION_GVA_TRANSLATED) is valid if and only if
bit 7 (EPT_VIOLATION_GVA_IS_VALID) is set, and is '0' if bit 7 is '0'.
Bit 7 (a.k.a. EPT_VIOLATION_GVA_IS_VALID)
Set if the guest linear-address field is valid. The guest linear-address
field is valid for all EPT violations except those resulting from an
attempt to load the guest PDPTEs as part of the execution of the MOV CR
instruction and those due to trace-address pre-translation
Bit 8 (a.k.a. EPT_VIOLATION_GVA_TRANSLATED)
If bit 7 is 1:
• Set if the access causing the EPT violation is to a guest-physical
address that is the translation of a linear address.
• Clear if the access causing the EPT violation is to a paging-structure
entry as part of a page walk or the update of an accessed or dirty bit.
Reserved if bit 7 is 0 (cleared to 0).
Failure to guard the logic on GVA_IS_VALID results in KVM marking the page
fault as PFERR_GUEST_PAGE_MASK when there is no known GVA, which can put
the vCPU into an infinite loop due to kvm_mmu_page_fault() getting false
positive on its PFERR_NESTED_GUEST_PAGE logic (though only because that
logic is also buggy/flawed).
In practice, this is largely a non-issue because so GVA_IS_VALID is almost
always set. However, when TDX comes along, GVA_IS_VALID will *never* be
set, as the TDX Module deliberately clears bits 12:7 in exit qualification,
e.g. so that the faulting virtual address and other metadata that aren't
practically useful for the hypervisor aren't leaked to the untrusted host.
When exit is due to EPT violation, bits 12-7 of the exit qualification
are cleared to 0.
Fixes: eebed24389 ("kvm: nVMX: Add support for fast unprotection of nested guest page tables")
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use KVM_PAGES_PER_HPAGE() instead of open coding equivalent logic that is
anything but obvious.
No functional change intended, and verified by compiling with the below
assertions:
BUILD_BUG_ON((1UL << KVM_HPAGE_GFN_SHIFT(PG_LEVEL_4K)) !=
KVM_PAGES_PER_HPAGE(PG_LEVEL_4K));
BUILD_BUG_ON((1UL << KVM_HPAGE_GFN_SHIFT(PG_LEVEL_2M)) !=
KVM_PAGES_PER_HPAGE(PG_LEVEL_2M));
BUILD_BUG_ON((1UL << KVM_HPAGE_GFN_SHIFT(PG_LEVEL_1G)) !=
KVM_PAGES_PER_HPAGE(PG_LEVEL_1G));
Link: https://lore.kernel.org/r/20240809194335.1726916-19-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Replace all of the open coded '1' literals used to mark a PTE list as
having many/multiple entries with a proper define. It's hard enough to
read the code with one magic bit, and a future patch to support "locking"
a single rmap will add another.
No functional change intended.
Link: https://lore.kernel.org/r/20240809194335.1726916-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fold mmu_spte_age() into its sole caller now that aging and testing for
young SPTEs is handled in a common location, i.e. doesn't require more
helpers.
Opportunistically remove the use of mmu_spte_get_lockless(), as mmu_lock
is held (for write!), and marking SPTEs for access tracking outside of
mmu_lock is unsafe (at least, as written). I.e. using the lockless
accessor is quite misleading.
No functional change intended.
Link: https://lore.kernel.org/r/20240809194335.1726916-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rework kvm_handle_gfn_range() into an aging-specic helper,
kvm_rmap_age_gfn_range(). In addition to purging a bunch of unnecessary
boilerplate code, this sets the stage for aging rmap SPTEs outside of
mmu_lock.
Note, there's a small functional change, as kvm_test_age_gfn() will now
return immediately if a young SPTE is found, whereas previously KVM would
continue iterating over other levels.
Link: https://lore.kernel.org/r/20240809194335.1726916-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert kvm_unmap_gfn_range(), which is the helper that zaps rmap SPTEs in
response to an mmu_notifier invalidation, to use __kvm_rmap_zap_gfn_range()
and feed in range->may_block. In other words, honor NEED_RESCHED by way of
cond_resched() when zapping rmaps. This fixes a long-standing issue where
KVM could process an absurd number of rmap entries without ever yielding,
e.g. if an mmu_notifier fired on a PUD (or larger) range.
Opportunistically rename __kvm_zap_rmap() to kvm_zap_rmap(), and drop the
old kvm_zap_rmap(). Ideally, the shuffling would be done in a different
patch, but that just makes the compiler unhappy, e.g.
arch/x86/kvm/mmu/mmu.c:1462:13: error: ‘kvm_zap_rmap’ defined but not used
Reported-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240809194335.1726916-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a dedicated helper to walk and zap rmaps for a given memslot so that
the code can be shared between KVM-initiated zaps and mmu_notifier
invalidations.
No functional change intended.
Link: https://lore.kernel.org/r/20240809194335.1726916-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a @can_yield param to __walk_slot_rmaps() to control whether or not
dropping mmu_lock and conditionally rescheduling is allowed. This will
allow using __walk_slot_rmaps() and thus cond_resched() to handle
mmu_notifier invalidations, which usually allow blocking/yielding, but not
when invoked by the OOM killer.
Link: https://lore.kernel.org/r/20240809194335.1726916-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move walk_slot_rmaps() and friends up near for_each_slot_rmap_range() so
that the walkers can be used to handle mmu_notifier invalidations, and so
that similar function has some amount of locality in code.
No functional change intended.
Link: https://lore.kernel.org/r/20240809194335.1726916-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
