Hopefully the last PR for 6.11, at least for this level of amount.
In addition to the usual HD-audio quirks, there are more changes in
ASoC, but all look small and device-specific fixes, and nothing stands
out. The only slightly big change is sunxi I2S fix, which looks quite
safe to apply, too.
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmbaxkIOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE/xDQ/9ESOhr5vmViDZ/LOXrmA36Mc7byvDE0ku9TsN
bEBRSo2J5GJX3ty9ST6Pwm4jRlPAXRrqqWNhP2b+nQTTdzRWFQC58m79BSGmGWRA
qyuFPakn1tiCdl5rvHS7hpYfzMkc8amVILhhJyhbv7Zg0UPriczPL3JI/W2GAJRs
vMuHAD2ulSTVcJdYGgvny5JGWVQ649mQw7rfp+h3G9kXRLyOXKamGLU2e68TEZLq
owUifBS1rC7+jXUn6dZ5MU86BLMQFCCDCOUjEEklH08Y+1DzqlS+JE80NcJlUBo8
xNHoY1xFqDb0DAPb3w7P5IfCMBkb1I2uyHyMQg+SJeN05qXiSAKIsZhr5/NeivFq
clB6R9l3tmN66lQEqr1ZxBEx6Sgr40Deh2qFOjyq7xsm+PRU4oPdels4+awRTWPy
8fr/L2wWtYGGILM7iDkasgVeYQZGFJ7AG0gC0AyUoKtEcZZsQUiwfAWT85K4GLP9
mmUMwqZH3nKtOxXgphSGbxOnep9cWNT7IJ/NXZ1iNGlByLXVDk5fIlOUK8983gCx
duuFA1CpR3RwayGOo2UIwT62+qOTtfwGGKkHAPWjbBWa/daNxI8UEaHH/XEH3qyy
iK8xFIkKimi95hjAA8FmVN6aGkeu3OCnQvdzbP3f3k0Tj1xe3t42xhPmQVl9yrpu
lwIdl20=
=npz1
-----END PGP SIGNATURE-----
Merge tag 'sound-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Hopefully the last PR for 6.11, at least for this level of amount.
In addition to the usual HD-audio quirks, there are more changes in
ASoC, but all look small and device-specific fixes, and nothing stands
out. The only slightly big change is sunxi I2S fix, which looks quite
safe to apply, too"
* tag 'sound-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: hda/realtek - Fix inactive headset mic jack for ASUS Vivobook 15 X1504VAP
ALSA: hda/realtek: Support mute LED on HP Laptop 14-dq2xxx
ALSA: hda/realtek: Enable Mute Led for HP Victus 15-fb1xxx
ALSA: hda/realtek: extend quirks for Clevo V5[46]0
ASoC: codecs: lpass-va-macro: set the default codec version for sm8250
ALSA: hda: add HDMI codec ID for Intel PTL
ALSA: hda/realtek: add patch for internal mic in Lenovo V145
ASoC: sunxi: sun4i-i2s: fix LRCLK polarity in i2s mode
ASoC: amd: yc: Add a quirk for MSI Bravo 17 (D7VEK)
ASoC: mediatek: mt8188-mt6359: Modify key
ASoc: SOF: topology: Clear SOF link platform name upon unload
ALSA: hda/conexant: Add pincfg quirk to enable top speakers on Sirius devices
ASoC: SOF: ipc: replace "enum sof_comp_type" field with "uint32_t"
ASoC: fix module autoloading
ASoC: tda7419: fix module autoloading
ASoC: google: fix module autoloading
ASoC: intel: fix module autoloading
ASoC: tegra: Fix CBB error during probe()
ASoC: dapm: Fix UAF for snd_soc_pcm_runtime object
ASoC: Intel: soc-acpi-cht: Make Lenovo Yoga Tab 3 X90F DMI match less strict
...
- Several OF related cleanups in cpufreq drivers (Rob Herring).
- Enable COMPILE_TEST for ARM drivers (Rob Herrring).
- Introduce quirks for syscon failures and use socinfo to get revision
for TI cpufreq driver (Dhruva Gole and Nishanth Menon).
- Minor cleanups in amd-pstate driver (Anastasia Belova and Dhananjay
Ugwekar).
- Minor cleanups for loongson, cpufreq-dt and powernv cpufreq drivers
(Danila Tikhonov, Huacai Chen, and Liu Jing).
-----BEGIN PGP SIGNATURE-----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=BlNP
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-updates-6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge ARM cpufreq updates for 6.12 from Viresh Kumar:
"- Several OF related cleanups in cpufreq drivers (Rob Herring).
- Enable COMPILE_TEST for ARM drivers (Rob Herrring).
- Introduce quirks for syscon failures and use socinfo to get revision
for TI cpufreq driver (Dhruva Gole and Nishanth Menon).
- Minor cleanups in amd-pstate driver (Anastasia Belova and Dhananjay
Ugwekar).
- Minor cleanups for loongson, cpufreq-dt and powernv cpufreq drivers
(Danila Tikhonov, Huacai Chen, and Liu Jing)."
* tag 'cpufreq-arm-updates-6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: ti-cpufreq: Use socinfo to get revision in AM62 family
cpufreq: Fix the cacography in powernv-cpufreq.c
cpufreq: ti-cpufreq: Introduce quirks to handle syscon fails appropriately
cpufreq: loongson3: Use raw_smp_processor_id() in do_service_request()
cpufreq: amd-pstate: add check for cpufreq_cpu_get's return value
cpufreq: Add SM7325 to cpufreq-dt-platdev blocklist
cpufreq: Fix warning on unused of_device_id tables for !CONFIG_OF
cpufreq/amd-pstate: Add the missing cpufreq_cpu_put()
cpufreq: Drop CONFIG_ARM and CONFIG_ARM64 dependency on Arm drivers
cpufreq: Enable COMPILE_TEST on Arm drivers
cpufreq: armada-8k: Avoid excessive stack usage
cpufreq: omap: Drop asm includes
cpufreq: qcom: Add explicit io.h include for readl/writel_relaxed
cpufreq: spear: Use of_property_for_each_u32() instead of open coding
cpufreq: Use of_property_present()
- Use for_each_available_child_of_node_scoped() to remove the
of_node_put() calls in the loop (Zhang Zekun)
- Add the ability to register external callbacks for suspend/resume on
ACPI PM driver and enable to turn it off when suspended (Marek
Maslanka)
- Use the devm_clk_get_enabled() variant on the ingenic timer (Huan
Yang)
- Add missing iounmap() on errors in msm_dt_timer_init() (Ankit
Agrawal)
- Add missing clk_disable_unprepare() in init routine error code path
on the asm9260 and the cadence_ttc timers (Gaosheng Cui)
- Use request_percpu_irq() instead of request_irq() in order to fix a
wrong address space access reported by sparse (Uros Bizjak)
- Fix comment format for the pmc_core_acpi_pm_timer_suspend_resume()
function (Marek Maslanka)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmbbOBoACgkQqDIjiipP
6E8wDwf/QkAJ/1eHSy9z+WWynRYq0j7J1/RLxmxjHa/bP7+LW0/i05JTS/ag0tcK
2CO2yNFbsAgel3rxtnmV2xD8mzj9n2qt4Ome4nsFFWQpacIY90Amah/666ww2rhF
sGQ9xumMbbdZ4GgDCZ/XwjrIAu+BT6WgHqWGxm5x+ElNYlMF6bIpFWHo3rKKtE1C
yXZ2+K241A7nEhCjiflgT4R/uCG43lJj2REvUQNE0mbhTiaycOSSwvTxxUQIgoSR
uXtifhq3GjFSul2KmdKhMNywZsmQqjfUI5f4qAeyURRnHSvz4fTXOdGH++JFNnm1
CSaD8QfiuPq6tqXBSKwqscZqCyWxIg==
=OZes
-----END PGP SIGNATURE-----
Merge tag 'timers-v6.12-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clockevent/clocksource updates from Daniel Lezcano:
- Add the DT binding for the rk3576 compatible (Detlev Casanova)
- Use for_each_available_child_of_node_scoped() to remove the
of_node_put() calls in the loop (Zhang Zekun)
- Add the ability to register external callbacks for suspend/resume on
ACPI PM driver and enable to turn it off when suspended (Marek
Maslanka)
- Use the devm_clk_get_enabled() variant on the ingenic timer (Huan
Yang)
- Add missing iounmap() on errors in msm_dt_timer_init() (Ankit
Agrawal)
- Add missing clk_disable_unprepare() in init routine error code path
on the asm9260 and the cadence_ttc timers (Gaosheng Cui)
- Use request_percpu_irq() instead of request_irq() in order to fix a
wrong address space access reported by sparse (Uros Bizjak)
- Fix comment format for the pmc_core_acpi_pm_timer_suspend_resume()
function (Marek Maslanka)
Link: https://lore.kernel.org/all/6054852d-975f-4e83-850e-815f263a40c5@linaro.org
- fix an OF node reference leak in gpio-rockchip
- add the missing module device table to gpio-modepin
-----BEGIN PGP SIGNATURE-----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=kfnM
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an OF node reference leak in gpio-rockchip
- add the missing module device table to gpio-modepin
* tag 'gpio-fixes-for-v6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: modepin: Enable module autoloading
gpio: rockchip: fix OF node leak in probe()
- Fix support for required OPPs for multiple PM domains
-----BEGIN PGP SIGNATURE-----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=XXjD
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.11-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fix from Ulf Hansson:
- Fix support for required OPPs for multiple PM domains
* tag 'pmdomain-v6.11-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
OPP: Fix support for required OPPs for multiple PM domains
Hardware engineers tend to start counting at 1 while the software guys
usually start with 0. This isn't so nice because that results in drivers
where pwm device #2 needs to use the hardware registers with index 3.
With the commits
796b942f65 ("mfd: stm32-timers: Add some register definitions with a parameter")
7cea05ae1d ("pwm-stm32: Make use of parametrised register definitions")
(merged for v6.11-rc1) I tried to improve the situation and make this
counting mismatch more explicit and transparent. However in one instance
I failed to add the needed +1.
This was noticed by Fabrice Gasnier (however in a way that made me
hesitate to add a "Reported-by:" tag, see
https://lore.kernel.org/linux-pwm/3515a8f3-436e-4d14-9bac-dfe6aa869819@foss.st.com),
thanks to him for catching the issue.
A small patch fixing that mismatch is the only change included here.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmbavHoACgkQj4D7WH0S
/k71QAf/YE64gkrQZ1nlYWrU0XLH49d+GDI92Q3qYgU0HLontdH+k1hoBra3SgvR
OSKeyJdXM9ffQ5MDqYE+wKiriAdx87bnqlIp1eUeIcZmmSpR7x1XEKGRclpYJXPz
MFEuK5cxzQAP2bihWavkcl1Ws5LmuTKJMJUbtrDW5R6jYQUesRx5Dxt/U+e8s8cu
HL205kNWGpCcyuLmiUNeu3mlP0qX4EbCa9iuhMvkuz7nNjrNSZ3Mdsc0bIEzKxKc
NL3yLYqPcOO7z6whGH/05SjRFtKpRrZJ1Pnn4VpEfmfoWINIGDslqPmsxeodMux3
emkXmTWpmu+ptnk9Bgzl6NAqGijFMQ==
=d3K/
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.11-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fix from Uwe Kleine-König:
"Fix an off-by-one in the stm32 driver.
Hardware engineers tend to start counting at 1 while the software guys
usually start with 0. This isn't so nice because that results in
drivers where pwm device #2 needs to use the hardware registers with
index 3.
This was noticed by Fabrice Gasnier.
A small patch fixing that mismatch is the only change included here"
* tag 'pwm/for-6.11-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: stm32: Use the right CCxNP bit in stm32_pwm_enable()
pick_task_scx() must be preceded by balance_scx() but there currently is a
bug where fair could say yes on balance() but no on pick_task(), which then
ends up calling pick_task_scx() without preceding balance_scx(). Work around
by dropping WARN_ON_ONCE() and ignoring cases which don't make sense.
This isn't great and can theoretically lead to stalls. However, for
switch_all cases, this happens only while a BPF scheduler is being loaded or
unloaded, and, for partial cases, fair will likely keep triggering this CPU.
This will be reverted once the fair behavior is fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
amdgpu:
- IPS workaround
- Fix compatibility with older MES firmware
- Fix CPU spikes when clearing VRAM
- Backlight fix
- PMO fix
- Revert SWSMU change to fix regression
xe:
- GSC loading fix
- PCODE mutex fix
- Suspend/Resume fixes
- RPM fixes
i915:
- Do not attempt to load the GSC multiple times
- Fix readout degamma_lut mismatch on ilk/snb
- Mark debug_fence_init_onstack() with __maybe_unused
- fence: Mark debug_fence_free() with __maybe_unused
- display: Add mechanism to use sink model when applying quirk
- display: Increase Fast Wake Sync length as a quirk
komeda:
- zpos normalization fix
nouveau:
- incorrect register fix
imagination:
- memory leak fix
bridge:
- hdmi/bridge rework fixes
panthor:
- cache coherency fix
- hi priority access fix
panel:
- change of compatible string
fbdev:
- deferred-io init with no struct page fix
-----BEGIN PGP SIGNATURE-----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=EJEZ
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-09-06' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"This has a fair few patches in it, but I reviewed them all and they
seem like real things, amdgpu, i915 and xe each have a bunch of fixes
for various things, then there is a some bridge suspend/resume
ordering fixes for a recent rework, and then some single driver
changes in a few others.
Nothing looks too serious, hopefully next week is quiet.
amdgpu:
- IPS workaround
- Fix compatibility with older MES firmware
- Fix CPU spikes when clearing VRAM
- Backlight fix
- PMO fix
- Revert SWSMU change to fix regression
xe:
- GSC loading fix
- PCODE mutex fix
- Suspend/Resume fixes
- RPM fixes
i915:
- Do not attempt to load the GSC multiple times
- Fix readout degamma_lut mismatch on ilk/snb
- Mark debug_fence_init_onstack() with __maybe_unused
- fence: Mark debug_fence_free() with __maybe_unused
- display: Add mechanism to use sink model when applying quirk
- display: Increase Fast Wake Sync length as a quirk
komeda:
- zpos normalization fix
nouveau:
- incorrect register fix
imagination:
- memory leak fix
bridge:
- hdmi/bridge rework fixes
panthor:
- cache coherency fix
- hi priority access fix
panel:
- change of compatible string
fbdev:
- deferred-io init with no struct page fix"
* tag 'drm-fixes-2024-09-06' of https://gitlab.freedesktop.org/drm/kernel: (29 commits)
Revert "drm/amdgpu: align pp_power_profile_mode with kernel docs"
drm/fbdev-dma: Only install deferred I/O if necessary
drm/panthor: flush FW AS caches in slow reset path
drm: panel: nv3052c: Correct WL-355608-A8 panel compatible
dt-bindings: display: panel: Rename WL-355608-A8 panel to rg35xx-*-panel
drm/panthor: Restrict high priorities on group_create
drm/xe/display: Avoid encoder_suspend at runtime suspend
drm/xe: Suspend/resume user access only during system s/r
drm/xe/display: Match i915 driver suspend/resume sequences better
drm/xe: Add missing runtime reference to wedged upon gt_reset
drm/xe/pcode: Treat pcode as per-tile rather than per-GT
drm/xe/gsc: Do not attempt to load the GSC multiple times
drm/bridge-connector: reset the HDMI connector state
drm/bridge-connector: move to DRM_DISPLAY_HELPER module
drm/display: stop depending on DRM_DISPLAY_HELPER
drm/i915/display: Increase Fast Wake Sync length as a quirk
drm/i915/display: Add mechanism to use sink model when applying quirk
drm/amd/display: Block timing sync for different signals in PMO
drm/amd/display: Lock DC and exit IPS when changing backlight
drm/amdgpu: always allocate cleared VRAM for GEM allocations
...
Use previously implemented SF aux driver. It is probe during SF
activation and remove after deactivation.
Implement set/get hw_address and set/get state as basic devlink ops for
subfunction.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Implement add / delete vlan for subfunction type VSI.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Flow for creating Tx topology is the same as for VF port representors,
but the devlink port is stored in different place (sf->devlink_port).
When creating VF devlink lock isn't taken, when creating subfunction it
is. Setting Tx topology function needs to take this lock, check if it
was taken before to not do it twice.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Subfunction port representor needs the basic netdevice ops to work
correctly. Create them.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Now there is another type of port representor. Correct checking if
parent device is ready to reflect also new PR type.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add check for subfunction before setting target VSI. It is needed for PF
in switchdev mode but not for subfunction (even in switchdev mode).
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Implement attaching and detaching SF port representor. It is done in the
same way as the VF port representor.
SF port representor is always added or removed with devlink
lock taken.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Keep the same flow of port representor creation, but instead of general
attach function create helpers for specific representor type.
Store function pointer for add and remove representor.
Type of port representor can be also known based on VSI type, but it
is more clean to have it directly saved in port representor structure.
Add devlink lock for whole port representor creation and destruction.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Configure netdevice for subfunction usecase. Mostly it is reusing ops
from the PF netdevice.
SF netdev is linked to devlink port registered after SF activation.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Implement subfunction driver. It is probe when subfunction port is
activated.
VSI is already created. During the probe VSI is being configured.
MAC unicast and broadcast filter is added to allow traffic to pass.
Store subfunction pointer in VSI struct. The same is done for VF
pointer. Make union of subfunction and VF pointer as only one of them
can be set with one VSI.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Allocate devlink for subfunction instance.
Create header file for subfunction device. Define subfunction device
structure there as it is needed for devlink allocation.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When subfunction VSI is open the same code as for PF VSI should be
executed. Also when up is complete. Reflect that in code by adding
subfunction VSI to consideration.
In case of stopping, PF doesn't have additional tasks, so the same
is with subfunction VSI.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Implement devlink port handlers responsible for ethernet type devlink
subfunctions. Create subfunction devlink port and setup all resources
needed for a subfunction netdev to operate. Configure new VSI for each
new subfunction, initialize and configure interrupts and Tx/Rx resources.
Set correct MAC filters and create new netdev.
For now, subfunction is limited to only one Tx/Rx queue pair.
Only allocate new subfunction VSI with devlink port new command.
Allocate and free subfunction MSIX interrupt vectors using new API
calls with pci_msix_alloc_irq_at and pci_msix_free_irq.
Support both automatic and manual subfunction numbers. If no subfunction
number is provided, use xa_alloc to pick a number automatically. This
will find the first free index and use that as the number. This reduces
burden on users in the simple case where a specific number is not
required. It may also be slightly faster to check that a number exists
since xarray lookup should be faster than a linear scan of the dyn_ports
xarray.
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Make some of the netdevice_ops functions visible from outside for
another VSI type created netdev.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add required plumbing for new VSI type dedicated to devlink subfunctions.
Make sure that the vsi is properly configured and destroyed. Also allow
loading XDP and AF_XDP sockets.
The first implementation of devlink subfunctions supports only one Tx/Rx
queue pair per given subfunction.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Now reshape supports two ways: with backup file or without backup file.
For the situation without backup file, it needs to change data offset.
It doesn't need systemd service mdadm-grow-continue. So it can finish
the reshape job in one process environment. It can know the new level
from mdadm --grow command and can change to new level after reshape
finishes.
For the situation with backup file, it needs systemd service
mdadm-grow-continue to monitor reshape progress. So there are two process
envolved. One is mdadm --grow command whick kicks off reshape and wakes
up mdadm-grow-continue service. The second process is the service, which
doesn't know the new level from the first process.
In kernel space mddev->new_level is used to record the new level when
doing reshape. This patch adds a new interface to help mdadm update
new_level and sync it to metadata. Then mdadm-grow-continue can read the
right new_level.
Commit log revised by Song Liu. Please refer to the link for more details.
Signed-off-by: Xiao Ni <xni@redhat.com>
Link: https://lore.kernel.org/r/20240904235453.99120-1-xni@redhat.com
Signed-off-by: Song Liu <song@kernel.org>
It's confusing to have a *set* function that actually probes the
hardware rather than receiving a parameter. Rename it to *probe* along
with prefix removal and comment in the relevant places that the
has_flat_ccs flag may be overridden in runtime.
While at it, fix the mixed declaration of struct xe_gt.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904162238.2831202-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The flag is set in XE_HP_FEATURES, but then overridden in all but one
xe_graphics_desc. Make it set only where needed.
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904162238.2831202-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
This driver doesn't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240725160909.326143-2-u.kleine-koenig@baylibre.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240906141135.72080-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This pull request contains the interconnect changes for the 6.12-rc1 merge
window. It contains new drivers and fixes with the following highlights:
Driver changes:
- New driver for MSM8976 platforms
- New driver for MSM8937 platforms
- Enable sync_state for SM8250 platforms
- Enable QoS support for QCS404
- Add ab_coeff bandwidth adjustments for MSM8953
- Drop the unsupported yet DISP nodes on SM8350 platforms
- Fix missed num_nodes initialization in icc-clk driver
- Misc DT and documentation fixes
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ckcc
-----END PGP SIGNATURE-----
Merge tag 'icc-6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.12
This pull request contains the interconnect changes for the 6.12-rc1 merge
window. It contains new drivers and fixes with the following highlights:
Driver changes:
- New driver for MSM8976 platforms
- New driver for MSM8937 platforms
- Enable sync_state for SM8250 platforms
- Enable QoS support for QCS404
- Add ab_coeff bandwidth adjustments for MSM8953
- Drop the unsupported yet DISP nodes on SM8350 platforms
- Fix missed num_nodes initialization in icc-clk driver
- Misc DT and documentation fixes
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
dt-bindings: interconnect: qcom: Do not require reg for sc8180x virt NoCs
dt-bindings: interconnect: qcom-bwmon: Document SA8775p bwmon compatibles
dt-bindings: interconnect: qcom: msm8953: Fix 'See also' in description
interconnect: qcom: msm8953: Add ab_coeff
dt-bindings: interconnect: qcom: msm8939: Fix example
interconnect: qcom: qcs404: Add regmaps and more bus descriptions
interconnect: qcom: qcs404: Mark AP-owned nodes as such
interconnect: qcom: Add MSM8937 interconnect provider driver
interconnect: qcom: sm8250: Enable sync_state
dt-bindings: interconnect: qcom,sm8350: drop DISP nodes
interconnect: qcom: sm8350: drop DISP nodes
dt-bindings: interconnect: qcom: Add Qualcomm MSM8937 NoC
interconnect: qcom: Add MSM8976 interconnect provider driver
dt-bindings: interconnect: qcom: Add Qualcomm MSM8976 NoC
interconnect: icc-clk: Add missed num_nodes initialization
dt-bindings: interconnect: qcom,rpmh: correct sm8150 camnoc
Add error message to better explain to the user when SWIG and
python-config is missing from the path. Makefile was cleaned up
and unneeded elements were removed.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: John B. Wyatt IV <jwyatt@redhat.com>
Signed-off-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When resctrl is built on architectures without __cpuid_count()
support, build fails. resctrl uses __cpuid_count() defined in
kselftest.h.
Even though the problem is seen while building resctrl on aarch64,
this error can be seen on any platform that doesn't support CPUID.
CPUID is a x86/x86-64 feature and code paths with CPUID asm commands
will fail to build on all other architectures.
All others tests call __cpuid_count() do so from x86/x86_64 code paths
when _i386__ or __x86_64__ are defined. resctrl is an exception.
Fix the problem by defining __cpuid_count() only when __i386__ or
__x86_64__ are defined in kselftest.h and changing resctrl to call
__cpuid_count() only when __i386__ or __x86_64__ are defined.
In file included from resctrl.h:24,
from cat_test.c:11:
In function ‘arch_supports_noncont_cat’,
inlined from ‘noncont_cat_run_test’ at cat_test.c:326:6:
../kselftest.h:74:9: error: impossible constraint in ‘asm’
74 | __asm__ __volatile__ ("cpuid\n\t" \
| ^~~~~~~
cat_test.c:304:17: note: in expansion of macro ‘__cpuid_count’
304 | __cpuid_count(0x10, 1, eax, ebx, ecx, edx);
| ^~~~~~~~~~~~~
../kselftest.h:74:9: error: impossible constraint in ‘asm’
74 | __asm__ __volatile__ ("cpuid\n\t" \
| ^~~~~~~
cat_test.c:306:17: note: in expansion of macro ‘__cpuid_count’
306 | __cpuid_count(0x10, 2, eax, ebx, ecx, edx);
Fixes: ae638551ab ("selftests/resctrl: Add non-contiguous CBMs CAT test")
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Closes: https://lore.kernel.org/lkml/20240809071059.265914-1-usama.anjum@collabora.com/
Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The PCIe SSD Status LED Management _DSM defined in PCI Firmware Spec r3.3
sec 4.7 provides a way to manage LEDs via ACPI.
The design is similar to NPEM defined in PCIe Base Specification r6.1 sec
6.28:
- Both standards are indication oriented,
- _DSM supported bits correspond to NPEM capability register bits,
- _DSM control bits correspond to NPEM control register bits.
_DSM does not support enclosure-specific indications or the special NPEM
commands NPEM_ENABLE and NPEM_RESET.
_DSM is implemented as a second backend in NPEM driver. The backend used is
logged with info priority. The same sysfs interface is used for both NPEM
and _DSM.
According to spec, _DSM has higher priority, and availability of _DSM in
not limited to devices with NPEM support.
The Dell implementation of DSM uses acpi ipmi, which may not be available
immediately (in fact it may take up to 10s for this interface to be
available). It can determine if DSM is supported (GET_SUPPORTED_STATES_DSM
is working) but it cannot serve GET_STATE_DSM or SET_STATE_DSM commands in
this time.
From userspace application perspective (primarily configured by systemd
service) it is better to have not working but configured interface rather
than have it available after few seconds.
For that reason, npem->active_indications cache is now loaded lazily, i.e.
any GET or SET request want cache to be updated if it is not done yet.
Link: https://lore.kernel.org/r/20240904104848.23480-4-mariusz.tkaczyk@linux.intel.com
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Do not raise a WARN if we are likely within suspending or resuming
path. This is likely this false positive:
rpm_status: 0000:03:00.0 status=RPM_SUSPENDING
console: xe_bo_evict_all (called from suspend)
xe_sched_job_create: dev=0000:03:00.0, ...
xe_sched_job_exec: dev=0000:03:00.0, ...
xe_pm_runtime_put: dev=0000:03:00.0, ...
xe_sched_job_run: dev=0000:03:00.0, ...
rpm_usage: 0000:03:00.0 flags-0 cnt-2 ...
rpm_usage: 0000:03:00.0 flags-0 cnt-2 ...
rpm_usage: 0000:03:00.0 flags-0 cnt-2 ...
console: xe 0000:03:00.0: [drm] Missing outer runtime
PM protection
console: xe_guc_ct_send+0x15/0x50 [xe]
console: guc_exec_queue_run_job+0x1509/0x3950 [xe]
[snip]
console: drm_sched_run_job_work+0x649/0xc20
At this point, BOs are getting evicted from VRAM with rpm
usage-counter = 2, but rpm status = SUSPENDING.
The xe->pm_callback_task won't be equal 'current' because this call is
coming from a work queue.
So, pm_runtime_get_if_active() will be called and return 0 because rpm
status != ACTIVE (but equal SUSPENDING or RESUMING).
v2: Still get the reference even on non suspending/resuming
path (Jonathan, Brost).
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905140215.56404-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Coarse Powergating is a power saving technique where Render and Media
can be power-gated independently irrespective of the rest of the GT.
For debug purposes, it is useful to expose the powergating information.
v2: move to debugfs
add details to commit message
add per-slice status for media
define reg bits in descending order (Matt Roper)
v3: fix return statement
fix kernel-doc
use loop for media slices
use helper function for status (Michal)
v4: add pg prefix
do not wake GT if in C6 (Badal)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906071126.28078-3-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Modify powergate enable condition based on the type of GT or presence of
media engines. Also have a copy of the value written to powergate enable
register.
v2: add condition to enable render or media powergating (Badal)
v3: fix commit message (Shekhar)
fix kernel-doc
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906071126.28078-2-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
That would be rather nice to have and the kernel side is really trivial,
only the userspace side might be a bit more complex.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826122541.85663-4-christian.koenig@amd.com
Different approaches have been tried to signal resets and other errors in
vendor specific ways which not only resulted in a wide variety of
implementations but also repeating the same bugs and problems over different
drivers.
Document that drivers should use dma_fence based error signaling which is
vendor agnostic and allows userspace to query submission errors in generic
non-vendor specific code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826122541.85663-3-christian.koenig@amd.com
The dma_fence_set_error() function allows to set an error code on a
dma_fence object before it is signaled.
Document some of the potential error codes drivers should use and
especially what they mean.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826122541.85663-2-christian.koenig@amd.com
The current implementation of drm_sched_start uses a hardcoded
-ECANCELED to dispose of a job when the parent/hw fence is NULL.
This results in drm_sched_job_done being called with -ECANCELED for
each job with a NULL parent in the pending list, making it difficult
to distinguish between recovery methods, whether a queue reset or a
full GPU reset was used.
To improve this, we first try a soft recovery for timeout jobs and
use the error code -ENODATA. If soft recovery fails, we proceed with
a queue reset, where the error code remains -ENODATA for the job.
Finally, for a full GPU reset, we use error codes -ECANCELED or
-ETIME. This patch adds an error code parameter to drm_sched_start,
allowing us to differentiate between queue reset and GPU reset
failures. This enables user mode and test applications to validate
the expected correctness of the requested operation. After a
successful queue reset, the only way to continue normal operation is
to call drm_sched_job_done with the specific error code -ENODATA.
v1: Initial implementation by Jesse utilized amdgpu_device_lock_reset_domain
and amdgpu_device_unlock_reset_domain to allow user mode to track
the queue reset status and distinguish between queue reset and
GPU reset.
v2: Christian suggested using the error codes -ENODATA for queue reset
and -ECANCELED or -ETIME for GPU reset, returned to
amdgpu_cs_wait_ioctl.
v3: To meet the requirements, we introduce a new function
drm_sched_start_ex with an additional parameter to set
dma_fence_set_error, allowing us to handle the specific error
codes appropriately and dispose of bad jobs with the selected
error code depending on whether it was a queue reset or GPU reset.
v4: Alex suggested using a new name, drm_sched_start_with_recovery_error,
which more accurately describes the function's purpose.
Additionally, it was recommended to add documentation details
about the new method.
v5: Fixed declaration of new function drm_sched_start_with_recovery_error.(Alex)
v6 (chk): rebase on upstream changes, cleanup the commit message,
drop the new function again and update all callers,
apply the errno also to scheduler fences with hw fences
v7 (chk): rebased
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826122541.85663-1-christian.koenig@amd.com
Replace the deprecated one-element array with a modern flexible-array
member in the struct affs_root_head.
Add a comment that most struct members are not used, but kept as
documentation.
Link: https://github.com/KSPP/linux/issues/79
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The macros GET_END_PTR() and AFFS_GET_HASHENTRY() are not used anymore
and can be removed. Remove them.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Based on the I3C TCRI specification, the rules for determining the I3C
mode are as follows:
I3C SCL rate > 8MHz: use SDR0, as SDR1 has a maximum data rate of 8MHz
I3C SCL rate > 6MHz: use SDR1, as SDR2 has a maximum data rate of 6MHz
I3C SCL rate > 4MHz: use SDR2, as SDR3 has a maximum data rate of 4MHz
I3C SCL rate > 2MHz: use SDR3, as SDR4 has a maximum data rate of 2MHz
Otherwise, use SDR4
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20240826033821.175591-1-billy_tsai@aspeedtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add the device id for the Macrosilicon MS3020 which is a
PL2303HXN based device.
Signed-off-by: Junhao Xie <bigfoot@classfun.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
devm_kasprintf() can return a NULL pointer on failure but this
returned value is not checked.
Fixes: acfe63ec1c ("mtd: Convert to using %pOFn instead of device_node.name")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240828092427.128177-1-hanchunchao@inspur.com
There are some un-freed resources in one of the error path which would
benefit from a helper going through all the registered mtk chips one by
one and perform all the necessary cleanup. This is precisely what the
remove path does, so let's extract the logic in a helper.
There is no functional change.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20240826153019.67106-1-miquel.raynal@bootlin.com
Like for other atmel drivers (serial, crypto, mmc, …), too.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240828063707.73869-1-ada@thorsis.com
