Another big bottleneck to scalablity is uprobe_treelock that's taken in
a very hot path in handle_swbp(). Now that uprobes are SRCU-protected,
take advantage of that and make uprobes_tree RB-tree look up lockless.
To make RB-tree RCU-protected lockless lookup correct, we need to take
into account that such RB-tree lookup can return false negatives if there
are parallel RB-tree modifications (rotations) going on. We use seqcount
lock to detect whether RB-tree changed, and if we find nothing while
RB-tree got modified inbetween, we just retry. If uprobe was found, then
it's guaranteed to be a correct lookup.
With all the lock-avoiding changes done, we get a pretty decent
improvement in performance and scalability of uprobes with number of
CPUs, even though we are still nowhere near linear scalability. This is
due to SRCU not really scaling very well with number of CPUs on
a particular hardware that was used for testing (80-core Intel Xeon Gold
6138 CPU @ 2.00GHz), but also due to the remaning mmap_lock, which is
currently taken to resolve interrupt address to inode+offset and then
uprobe instance. And, of course, uretprobes still need similar RCU to
avoid refcount in the hot path, which will be addressed in the follow up
patches.
Nevertheless, the improvement is good. We used BPF selftest-based
uprobe-nop and uretprobe-nop benchmarks to get the below numbers,
varying number of CPUs on which uprobes and uretprobes are triggered.
BASELINE
========
uprobe-nop ( 1 cpus): 3.032 ± 0.023M/s ( 3.032M/s/cpu)
uprobe-nop ( 2 cpus): 3.452 ± 0.005M/s ( 1.726M/s/cpu)
uprobe-nop ( 4 cpus): 3.663 ± 0.005M/s ( 0.916M/s/cpu)
uprobe-nop ( 8 cpus): 3.718 ± 0.038M/s ( 0.465M/s/cpu)
uprobe-nop (16 cpus): 3.344 ± 0.008M/s ( 0.209M/s/cpu)
uprobe-nop (32 cpus): 2.288 ± 0.021M/s ( 0.071M/s/cpu)
uprobe-nop (64 cpus): 3.205 ± 0.004M/s ( 0.050M/s/cpu)
uretprobe-nop ( 1 cpus): 1.979 ± 0.005M/s ( 1.979M/s/cpu)
uretprobe-nop ( 2 cpus): 2.361 ± 0.005M/s ( 1.180M/s/cpu)
uretprobe-nop ( 4 cpus): 2.309 ± 0.002M/s ( 0.577M/s/cpu)
uretprobe-nop ( 8 cpus): 2.253 ± 0.001M/s ( 0.282M/s/cpu)
uretprobe-nop (16 cpus): 2.007 ± 0.000M/s ( 0.125M/s/cpu)
uretprobe-nop (32 cpus): 1.624 ± 0.003M/s ( 0.051M/s/cpu)
uretprobe-nop (64 cpus): 2.149 ± 0.001M/s ( 0.034M/s/cpu)
SRCU CHANGES
============
uprobe-nop ( 1 cpus): 3.276 ± 0.005M/s ( 3.276M/s/cpu)
uprobe-nop ( 2 cpus): 4.125 ± 0.002M/s ( 2.063M/s/cpu)
uprobe-nop ( 4 cpus): 7.713 ± 0.002M/s ( 1.928M/s/cpu)
uprobe-nop ( 8 cpus): 8.097 ± 0.006M/s ( 1.012M/s/cpu)
uprobe-nop (16 cpus): 6.501 ± 0.056M/s ( 0.406M/s/cpu)
uprobe-nop (32 cpus): 4.398 ± 0.084M/s ( 0.137M/s/cpu)
uprobe-nop (64 cpus): 6.452 ± 0.000M/s ( 0.101M/s/cpu)
uretprobe-nop ( 1 cpus): 2.055 ± 0.001M/s ( 2.055M/s/cpu)
uretprobe-nop ( 2 cpus): 2.677 ± 0.000M/s ( 1.339M/s/cpu)
uretprobe-nop ( 4 cpus): 4.561 ± 0.003M/s ( 1.140M/s/cpu)
uretprobe-nop ( 8 cpus): 5.291 ± 0.002M/s ( 0.661M/s/cpu)
uretprobe-nop (16 cpus): 5.065 ± 0.019M/s ( 0.317M/s/cpu)
uretprobe-nop (32 cpus): 3.622 ± 0.003M/s ( 0.113M/s/cpu)
uretprobe-nop (64 cpus): 3.723 ± 0.002M/s ( 0.058M/s/cpu)
Peak througput increased from 3.7 mln/s (uprobe triggerings) up to about
8 mln/s. For uretprobes it's a bit more modest with bump from 2.4 mln/s
to 5mln/s.
Suggested-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240903174603.3554182-8-andrii@kernel.org
Much like latch_tree, add two RCU methods for the regular RB-tree,
which can be used in conjunction with a seqcount to provide lockless
lookups.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240903174603.3554182-7-andrii@kernel.org
With uprobe_unregister() having grown a synchronize_srcu(), it becomes
fairly slow to call. Esp. since both users of this API call it in a
loop.
Peel off the sync_srcu() and do it once, after the loop.
We also need to add uprobe_unregister_sync() into uprobe_register()'s
error handling path, as we need to be careful about returning to the
caller before we have a guarantee that partially attached consumer won't
be called anymore. This is an unlikely slow path and this should be
totally fine to be slow in the case of a failed attach.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Co-developed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240903174603.3554182-6-andrii@kernel.org
uprobe->register_rwsem is one of a few big bottlenecks to scalability of
uprobes, so we need to get rid of it to improve uprobe performance and
multi-CPU scalability.
First, we turn uprobe's consumer list to a typical doubly-linked list
and utilize existing RCU-aware helpers for traversing such lists, as
well as adding and removing elements from it.
For entry uprobes we already have SRCU protection active since before
uprobe lookup. For uretprobe we keep refcount, guaranteeing that uprobe
won't go away from under us, but we add SRCU protection around consumer
list traversal.
Lastly, to keep handler_chain()'s UPROBE_HANDLER_REMOVE handling simple,
we remember whether any removal was requested during handler calls, but
then we double-check the decision under a proper register_rwsem using
consumers' filter callbacks. Handler removal is very rare, so this extra
lock won't hurt performance, overall, but we also avoid the need for any
extra protection (e.g., seqcount locks).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240903174603.3554182-5-andrii@kernel.org
It serves no purpose beyond adding unnecessray argument passed to the
filter callback. Just get rid of it, no one is actually using it.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240903174603.3554182-4-andrii@kernel.org
To avoid unnecessarily taking a (brief) refcount on uprobe during
breakpoint handling in handle_swbp for entry uprobes, make find_uprobe()
not take refcount, but protect the lifetime of a uprobe instance with
RCU. This improves scalability, as refcount gets quite expensive due to
cache line bouncing between multiple CPUs.
Specifically, we utilize our own uprobe-specific SRCU instance for this
RCU protection. put_uprobe() will delay actual kfree() using call_srcu().
For now, uretprobe and single-stepping handling will still acquire
refcount as necessary. We'll address these issues in follow up patches
by making them use SRCU with timeout.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240903174603.3554182-3-andrii@kernel.org
Revamp how struct uprobe is refcounted, and thus how its lifetime is
managed.
Right now, there are a few possible "owners" of uprobe refcount:
- uprobes_tree RB tree assumes one refcount when uprobe is registered
and added to the lookup tree;
- while uprobe is triggered and kernel is handling it in the breakpoint
handler code, temporary refcount bump is done to keep uprobe from
being freed;
- if we have uretprobe requested on a given struct uprobe instance, we
take another refcount to keep uprobe alive until user space code
returns from the function and triggers return handler.
The uprobe_tree's extra refcount of 1 is confusing and problematic. No
matter how many actual consumers are attached, they all share the same
refcount, and we have an extra logic to drop the "last" (which might not
really be last) refcount once uprobe's consumer list becomes empty.
This is unconventional and has to be kept in mind as a special case all
the time. Further, because of this design we have the situations where
find_uprobe() will find uprobe, bump refcount, return it to the caller,
but that uprobe will still need uprobe_is_active() check, after which
the caller is required to drop refcount and try again. This is just too
many details leaking to the higher level logic.
This patch changes refcounting scheme in such a way as to not have
uprobes_tree keeping extra refcount for struct uprobe. Instead, each
uprobe_consumer is assuming its own refcount, which will be dropped
when consumer is unregistered. Other than that, all the active users of
uprobe (entry and return uprobe handling code) keeps exactly the same
refcounting approach.
With the above setup, once uprobe's refcount drops to zero, we need to
make sure that uprobe's "destructor" removes uprobe from uprobes_tree,
of course. This, though, races with uprobe entry handling code in
handle_swbp(), which, through find_active_uprobe()->find_uprobe() lookup,
can race with uprobe being destroyed after refcount drops to zero (e.g.,
due to uprobe_consumer unregistering). So we add try_get_uprobe(), which
will attempt to bump refcount, unless it already is zero. Caller needs
to guarantee that uprobe instance won't be freed in parallel, which is
the case while we keep uprobes_treelock (for read or write, doesn't
matter).
Note also, we now don't leak the race between registration and
unregistration, so we remove the retry logic completely. If
find_uprobe() returns valid uprobe, it's guaranteed to remain in
uprobes_tree with properly incremented refcount. The race is handled
inside __insert_uprobe() and put_uprobe() working together:
__insert_uprobe() will remove uprobe from RB-tree, if it can't bump
refcount and will retry to insert the new uprobe instance. put_uprobe()
won't attempt to remove uprobe from RB-tree, if it's already not there.
All that is protected by uprobes_treelock, which keeps things simple.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240903174603.3554182-2-andrii@kernel.org
In perf_adjust_period, we will first calculate period, and then use
this period to calculate delta. However, when delta is less than 0,
there will be a deviation compared to when delta is greater than or
equal to 0. For example, when delta is in the range of [-14,-1], the
range of delta = delta + 7 is between [-7,6], so the final value of
delta/8 is 0. Therefore, the impact of -1 and -2 will be ignored.
This is unacceptable when the target period is very short, because
we will lose a lot of samples.
Here are some tests and analyzes:
before:
# perf record -e cs -F 1000 ./a.out
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.022 MB perf.data (518 samples) ]
# perf script
...
a.out 396 257.956048: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.957891: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.959730: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.961545: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.963355: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.965163: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.966973: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.968785: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.970593: 23 cs: ffffffff81f4eeec schedul>
...
after:
# perf record -e cs -F 1000 ./a.out
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.058 MB perf.data (1466 samples) ]
# perf script
...
a.out 395 59.338813: 11 cs: ffffffff81f4eeec schedul>
a.out 395 59.339707: 12 cs: ffffffff81f4eeec schedul>
a.out 395 59.340682: 13 cs: ffffffff81f4eeec schedul>
a.out 395 59.341751: 13 cs: ffffffff81f4eeec schedul>
a.out 395 59.342799: 12 cs: ffffffff81f4eeec schedul>
a.out 395 59.343765: 11 cs: ffffffff81f4eeec schedul>
a.out 395 59.344651: 11 cs: ffffffff81f4eeec schedul>
a.out 395 59.345539: 12 cs: ffffffff81f4eeec schedul>
a.out 395 59.346502: 13 cs: ffffffff81f4eeec schedul>
...
test.c
int main() {
for (int i = 0; i < 20000; i++)
usleep(10);
return 0;
}
# time ./a.out
real 0m1.583s
user 0m0.040s
sys 0m0.298s
The above results were tested on x86-64 qemu with KVM enabled using
test.c as test program. Ideally, we should have around 1500 samples,
but the previous algorithm had only about 500, whereas the modified
algorithm now has about 1400. Further more, the new version shows 1
sample per 0.001s, while the previous one is 1 sample per 0.002s.This
indicates that the new algorithm is more sensitive to small negative
values compared to old algorithm.
Fixes: bd2b5b1284 ("perf_counter: More aggressive frequency adjustment")
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240831074316.2106159-2-luogengkun@huaweicloud.com
Geoid is a module parameter which is set by root user.
Its valid values are between 0 and VME_MAX_SLOTS. So, changing data type
of geoid from int to u32 since it will always be positive.
Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com>
Link: https://lore.kernel.org/r/20240903114849.4953-3-riyandhiman14@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename function SelectChannel() to r8723bs_select_channel(), to avoid
CamelCase and to improve cleanliness of the global namespace.
Signed-off-by: vivek t s <vivek6429.ts@gmail.com>
Link: https://lore.kernel.org/r/ZtmD8i7YZLRIcaI9@victor-IdeaPad-Gaming-3-16IAH7
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge series from amergnat@baylibre.com:
This serie aim to add the following audio support for the Genio 350-evk:
- Playback
- 2ch Headset Jack (Earphone)
- 1ch Line-out Jack (Speaker)
- 8ch HDMI Tx
- Capture
- 1ch DMIC (On-board Digital Microphone)
- 1ch AMIC (On-board Analogic Microphone)
- 1ch Headset Jack (External Analogic Microphone)
Of course, HDMI playback need the MT8365 display patches [1] and a DTS
change documented in "mediatek,mt8365-mt6357.yaml".
Allow creators of seconday interrupters to specify the interrupt
moderation interval value in nanoseconds when creating the interrupter.
If not sure what value to use then use the xhci driver default
xhci->imod_interval
Suggested-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-13-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI xHC host should be stopped and xhci driver memory freed before putting
host to PCI D3 state during PCI remove callback.
Hosts with XHCI_SPURIOUS_WAKEUP quirk did this the wrong way around
and set the host to D3 before calling usb_hcd_pci_remove(dev), which will
access the host to stop it, and then free xhci.
Fixes: f1f6d9a8b5 ("xhci: don't dereference a xhci member after removing xhci")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-12-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce an initial check for an empty list prior to entering the while
loop. Which enables, the implementation of distinct warnings to
differentiate between scenarios where the list is initially empty and
when it has been emptied during processing skipped isoc TDs.
These adjustments not only simplifies the large while loop, but also
facilitates future enhancements to the handle_tx_event() function.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-11-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
HCD does not allocate or request interrupt for the xhci driver, but HCD
does free and sync xhci interrupts in some cases. Add comment detailing
in which cases HCD will free/sync xhci interrupts.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable 'sbrn' is used to store the Serial Bus Release Number, which is
then only used for a debug message. Thus, 'sbrn' can be a local variable
and assigned after the primary HCD check. The SBRN debug message is only
printed when a primary HCD is setup.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Completion codes 'COMP_SUCCESS' and 'COMP_SHORT_PACKET' are the most
frequently encountered completion codes. Typically, these codes do not
trigger a default debug message but rather a warning that indicates a
potential issue. This behavior is consistent across all transfer types
with the exception of Bulk transfers. To reduce unnecessary log clutter,
remove the Bulk 'COMP_SHORT_PACKET' debug message.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The removed debug messages trigger each time an isoc frame is handled.
In case of an error, a dedicated debug message exists.
For example, a 60fps USB camera will trigger the debug message every 0.6s.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure we move the requests from the read_queue to the end of the
read_pool list, avoiding looping and using the same one request all
the time.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't flush all pending DbC data requests when an endpoint halts.
An endpoint may halt and xHC DbC triggers a STALL error event if there's
an issue with a bulk data transfer. The transfer should restart once xHC
DbC receives a ClearFeature(ENDPOINT_HALT) request from the host.
Once xHC DbC restarts it will start from the TRB pointed to by dequeue
field in the endpoint context, which might be the same TRB we got the
STALL event for. Turn the TRB to a no-op in this case to make sure xHC
DbC doesn't reuse and tries to retransmit this same TRB after we already
handled it, and gave its corresponding data request back.
Other STALL events might be completely bogus.
Lukasz Bartosik discovered that xHC DbC might issue spurious STALL events
if hosts sends a ClearFeature(ENDPOINT_HALT) request to non-halted
endpoints even without any active bulk transfers.
Assume STALL event is spurious if it reports 0 bytes transferred, and
the endpoint stopped on the STALLED TRB.
Don't give back the data request corresponding to the TRB in this case.
The halted status is per endpoint. Track it with a per endpoint flag
instead of the driver invented DbC wide DS_STALLED state.
DbC remains in DbC-Configured state even if endpoints halt. There is no
Stalled state in the DbC Port state Machine (xhci section 7.6.6)
Reported-by: Łukasz Bartosik <ukaszb@chromium.org>
Closes: https://lore.kernel.org/linux-usb/20240725074857.623299-1-ukaszb@chromium.org/
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"lm75" without any vendor is undocumented. It works with the Linux
kernel since the I2C subsystem will do matches of the compatible string
without a vendor prefix to the i2c_device_id and/or driver name.
Mostly replace "lm75" with "national,lm75" as that's the original part
vendor and the compatible which matches what "lm75" matched with. In a
couple of cases the node name or compatible gives a clue to the actual
part and vendor and a more specific compatible can be used. In these
cases, it does change the variant the kernel picks.
"nct75" is an OnSemi part which is compatible with TI TMP75C based on
a comparison of the OnSemi NCT75 datasheet and configuration the Linux
driver uses. Adding an OnSemi compatible would be an ABI change.
"nxp,lm75" is most likely an NXP part. Alexander Stein says the i.MX53
boards are a NXP LM75A as well. NXP makes a LM75A and LM75B. Both are
11-bit resolution and 100ms sample time. The "national,lm75a" is
9-bit, so "national,lm75b" is the closest match for both NXP variants.
While we're here, fix the node names to use the generic name
"temperature-sensor".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com> # am335x-nano.dts
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx53-mba53.dts, imx53-tqma53.dtsi
Link: https://lore.kernel.org/r/20240816164717.1585629-1-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This 'struct kobj_type' is not modified. It is only used in
kobject_init_and_add() which takes a 'const struct kobj_type *ktype'
parameter.
Constifying this structure and moving it to a read-only section,
and can increase over all security.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20240904011434.2010118-1-lihongbo22@huawei.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
In this code, if devm_add_action_or_reset() fails, it will call
max1720x_unregister_ancillary() which in turn calls
i2c_unregister_device(). Thus the call to i2c_unregister_device() on the
following line is not required and is a double unregister. Delete it.
Fixes: 47271a9356 ("power: supply: max1720x: add read support for nvmem")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/9c2f76e7-5679-473b-9b9c-e11b492b96ac@stanley.mountain
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
When the headset is connected, there is no automatic switching of the
capture source - you can only manually select the headset microphone
in pavucontrol.
This patch fixes/activates the inactive microphone of the headset.
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240905140211.937385-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This check was missed, before we can pass a struct iommu_domain to a
driver callback we need to validate that the domain was created by that
driver.
Fixes: bd529dbb66 ("iommufd: Add a nested HW pagetable object")
Link: https://patch.msgid.link/r/0-v1-c8770519edde+1a-iommufd_nesting_ops_jgg@nvidia.com
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
========
core
----
- Used const qualifier for 'mhi_bus_type' to place it onto the read-only memory
segment.
pci_generic
-----------
- Fixed the Telit FE990A modem name as it was advertising the wrong product
name, thereby confusing the users.
- Added Netprisma LCUR57 and FCUN69 modems based on Qcom SDX24 and SDX6X SoCs.
- Updated the EDL (Emergency Download) firmware path for the Foxconn modems.
The patch that added the modem support mistakenly specified the generic EDL
firmware path common for Qcom based modems. But they won't work.
- Enabled the EDL trigger for all Foxconn modems to update the modem firmware.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAmbZu6sACgkQVZ8R5v6R
zvV3wQgAoAhLYgb7uHU5t4hGbqXlTMwAJZBi67iLewy2dyHomT90PD8f+YdJGba/
b8j4u8K4wePFuObDR3yWy8mmWoTt6+pt/5NagwVctXtYrIFvRNIm9OBMS5UuAZqL
HkRfHo41Xivh41uEmdFdwDjMqTw6DXCX1K5dnKw3aVEyLUdZMvoSkdL8ajOUxxiZ
5Sn6MIoThC+gE0oUHoL11OJV+HLod9IP3Oj0+yyqiRDciH9RnQZCOWHqRxRu4LVo
+ohTNaO4MNm2cLWPbPfU2bGLg5/JcYD61NvcvjNmtMk4+tcHbqMPVf12MQYNTnhJ
ZPK3v8E24vuIhbyQs2drZTMM1ECypA==
=ts9F
-----END PGP SIGNATURE-----
Merge tag 'mhi-for-v6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
MHI Host
========
core
----
- Used const qualifier for 'mhi_bus_type' to place it onto the read-only memory
segment.
pci_generic
-----------
- Fixed the Telit FE990A modem name as it was advertising the wrong product
name, thereby confusing the users.
- Added Netprisma LCUR57 and FCUN69 modems based on Qcom SDX24 and SDX6X SoCs.
- Updated the EDL (Emergency Download) firmware path for the Foxconn modems.
The patch that added the modem support mistakenly specified the generic EDL
firmware path common for Qcom based modems. But they won't work.
- Enabled the EDL trigger for all Foxconn modems to update the modem firmware.
* tag 'mhi-for-v6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
bus: mhi: host: pci_generic: Add support for Netprisma LCUR57 and FCUN69
bus: mhi: host: make mhi_bus_type const
bus: mhi: host: pci_generic: Fix the name for the Telit FE990A
In __tracing_open(), when max latency tracers took place on the cpu,
the time start of its buffer would be updated, then event entries with
timestamps being earlier than start of the buffer would be skipped
(see tracing_iter_reset()).
Softlockup will occur if the kernel is non-preemptible and too many
entries were skipped in the loop that reset every cpu buffer, so add
cond_resched() to avoid it.
Cc: stable@vger.kernel.org
Fixes: 2f26ebd549 ("tracing: use timestamp to determine start of latency traces")
Link: https://lore.kernel.org/20240827124654.3817443-1-zhengyejian@huaweicloud.com
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Zheng Yejian <zhengyejian@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
