There are a few PHY drivers that can handle SFP modules through their
sfp_upstream_ops. Introduce Phylib helpers to keep track of connected
SFP PHYs in a netdevice's namespace, by adding the SFP PHY to the
upstream PHY's netdev's namespace.
By doing so, these SFP PHYs can be enumerated and exposed to users,
which will be able to use their capabilities.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass the phy_device as a parameter to the sfp upstream .disconnect_phy
operation. This is preparatory work to help track phy devices across
a net_device's link.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use
with an SFP connector, on which an SFP transceiver containing a PHY can
be used.
With the current model, the transceiver's PHY can't be used for
operations such as cable testing, timestamping, macsec offload, etc.
The reason being that most of the logic for these configuration, coming
from either ethtool netlink or ioctls tend to use netdev->phydev, which
in multi-phy systems will reference the PHY closest to the MAC.
Introduce a numbering scheme allowing to enumerate PHY devices that
belong to any netdev, which can in turn allow userspace to take more
precise decisions with regard to each PHY's configuration.
The numbering is maintained per-netdev, in a phy_device_list.
The numbering works similarly to a netdevice's ifindex, with
identifiers that are only recycled once INT_MAX has been reached.
This prevents races that could occur between PHY listing and SFP
transceiver removal/insertion.
The identifiers are assigned at phy_attach time, as the numbering
depends on the netdevice the phy is attached to. The PHY index can be
re-used for PHYs that are persistent.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
The irq_domain passed to msi_lib_irq_domain_select() may not have
msi_parent_ops set. There is a NULL pointer check for it, but unfortunately
there is a dereference of the parent ops pointer before that.
Move the NULL pointer test before the first use of that pointer.
This was found on a MacchiatoBin (Marvell Armada 8K SoC), which uses the
irq-mvebu-sei driver.
Fixes: 72e257c6f0 ("irqchip: Provide irq-msi-lib")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240823100733.1900666-1-maxime.chevallier@bootlin.com
Closes: https://lore.kernel.org/all/20240821165034.1af97bad@fedora-3.home/
page_cache_ra_unbounded() was allocating single pages (0 order folios)
if there was no folio found in an index. Allocate mapping_min_order folios
as we need to guarantee the minimum order if it is set.
page_cache_ra_order() tries to allocate folio to the page cache with a
higher order if the index aligns with that order. Modify it so that the
order does not go below the mapping_min_order requirement of the page
cache. This function will do the right thing even if the new_order passed
is less than the mapping_min_order.
When adding new folios to the page cache we must also ensure the index
used is aligned to the mapping_min_order as the page cache requires the
index to be aligned to the order of the folio.
readahead_expand() is called from readahead aops to extend the range of
the readahead so this function can assume ractl->_index to be aligned with
min_order.
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Co-developed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240822135018.1931258-4-kernel@pankajraghav.com
Tested-by: David Howells <dhowells@redhat.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
filemap_create_folio() and do_read_cache_folio() were always allocating
folio of order 0. __filemap_get_folio was trying to allocate higher
order folios when fgp_flags had higher order hint set but it will default
to order 0 folio if higher order memory allocation fails.
Supporting mapping_min_order implies that we guarantee each folio in the
page cache has at least an order of mapping_min_order. When adding new
folios to the page cache we must also ensure the index used is aligned to
the mapping_min_order as the page cache requires the index to be aligned
to the order of the folio.
Co-developed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20240822135018.1931258-3-kernel@pankajraghav.com
Tested-by: David Howells <dhowells@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
We need filesystems to be able to communicate acceptable folio sizes
to the pagecache for a variety of uses (e.g. large block sizes).
Support a range of folio sizes between order-0 and order-31.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Co-developed-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20240822135018.1931258-2-kernel@pankajraghav.com
Tested-by: David Howells <dhowells@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In the recent work to remove page->index, a sanity check
that ensured all the readhead pages were covered by the
Squashfs data block was removed [1].
To avoid any regression, this commit adds the sanity check
back in an equivalent way. Namely the page actor will now
return error if any pages are unused after completion.
[1] https://lore.kernel.org/all/20240818235847.170468-3-phillip@squashfs.org.uk/
--
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Link: https://lore.kernel.org/r/20240822233106.121522-1-phillip@squashfs.org.uk
V3: last_page should be actor->last_page
Signed-off-by: Christian Brauner <brauner@kernel.org>
Filesystems may define their own splice write. Therefore, use the file
fops instead of invoking iter_file_splice_write() directly.
Signed-off-by: Ed Tsai <ed.tsai@mediatek.com>
Link: https://lore.kernel.org/r/20240708072208.25244-1-ed.tsai@mediatek.com
Fixes: 5ca7346861 ("fuse: implement splice read/write passthrough")
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
When testing hard lockup handling on my sc7180-trogdor-lazor device
with pseudo-NMI enabled, with serial console enabled and with kgdb
disabled, I found that the stack crawls printed to the serial console
ended up as a jumbled mess. After rebooting, the pstore-based console
looked fine though. Also, enabling kgdb to trap the panic made the
console look fine and avoided the mess.
After a bit of tracking down, I came to the conclusion that this was
what was happening:
1. The panic path was stopping all other CPUs with
panic_other_cpus_shutdown().
2. At least one of those other CPUs was in the middle of printing to
the serial console and holding the console port's lock, which is
grabbed with "irqsave". ...but since we were stopping with an NMI
we didn't care about the "irqsave" and interrupted anyway.
3. Since we stopped the CPU while it was holding the lock it would
never release it.
4. All future calls to output to the console would end up failing to
get the lock in qcom_geni_serial_console_write(). This isn't
_totally_ unexpected at panic time but it's a code path that's not
well tested, hard to get right, and apparently doesn't work
terribly well on the Qualcomm geni serial driver.
The Qualcomm geni serial driver was fixed to be a bit better in commit
9e957a1550 ("serial: qcom-geni: Don't cancel/abort if we can't get
the port lock") but it's nice not to get into this situation in the
first place.
Taking a page from what x86 appears to do in native_stop_other_cpus(),
do this:
1. First, try to stop other CPUs with a normal IPI and wait a second.
This gives them a chance to leave critical sections.
2. If CPUs fail to stop then retry with an NMI, but give a much lower
timeout since there's no good reason for a CPU not to react quickly
to a NMI.
This works well and avoids the corrupted console and (presumably)
could help avoid other similar issues.
In order to do this, we need to do a little re-organization of our
IPIs since we don't have any more free IDs. Do what was suggested in
previous conversations and combine "stop" and "crash stop". That frees
up an IPI so now we can have a "stop" and "stop NMI".
In order to do this we also need a slight change in the way we keep
track of which CPUs still need to be stopped. We need to know
specifically which CPUs haven't stopped yet when we fall back to NMI
but in the "crash stop" case the "cpu_online_mask" isn't updated as
CPUs go down. This is why that code path had an atomic of the number
of CPUs left. Solve this by also updating the "cpu_online_mask" for
crash stops.
All of the above lets us combine the logic for "stop" and "crash stop"
code, which appeared to have a bunch of arbitrary implementation
differences.
Aside from the above change where we try a normal IPI and then an NMI,
the combined function has a few subtle differences:
* In the normal smp_send_stop(), if we fail to stop one or more CPUs
then we won't include the current CPU (the one running
smp_send_stop()) in the error message.
* In crash_smp_send_stop(), if we fail to stop some CPUs we'll print
the CPUs that we failed to stop instead of printing all _but_ the
current running CPU.
* In crash_smp_send_stop(), we will now only print "SMP: stopping
secondary CPUs" if (system_state <= SYSTEM_RUNNING).
Fixes: d7402513c9 ("arm64: smp: IPI_CPU_STOP and IPI_CPU_CRASH_STOP should try for NMI")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240821145353.v3.1.Id4817adef610302554b8aa42b090d57270dc119c@changeid
Signed-off-by: Will Deacon <will@kernel.org>
If the GET_ERROR_STATUS command fails, ucsi_read_error() can
not reach the condition where the CCI error bit is checked,
because ucsi_run_command() has already checked that bit and
returned an error.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240816135859.3499351-7-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The command cancellation can be done right after detecting
that the PPM is busy. There is no need to do it separately
in ucsi_read_error() and ucsi_send_command_common().
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240816135859.3499351-6-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
So far that command was only used to read the response to
the Discover Identity Request, but it is handled with two
separate functions, which is not really necessary. Squashing
the command execution into a single function. That function
can now also be used to read other messages on top of the
Request Identity response.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240816135859.3499351-5-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This will make sure that the identity sysfs attribute files
are kept hidden if the UCSI interface doesn't support
reading the USB Power Delivery messages.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Link: https://lore.kernel.org/r/20240816135859.3499351-4-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
That may silently corrupt the data. Instead, failing attempts
to read more than the interface can handle.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Link: https://lore.kernel.org/r/20240816135859.3499351-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The new fields are valid only with the new UCSI versions.
They are at offsets that go beyond the MAX_DATA_LENGTH (16
bytes) with the older UCSI versions. That has not caused any
problems before because nothing uses those new fields yet.
Because they are not used yet, dropping them for now.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240816135859.3499351-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The GICv3 driver pokes GICv3 system registers in gic_prio_init() before
gic_cpu_sys_reg_init() ensures that GICv3 system registers have been
enabled by writing to ICC_SRE_EL1.SRE.
On arm64 this is benign as has_useable_gicv3_cpuif() runs earlier during
cpufeature detection, and this enables the GICv3 system registers.
On 32-bit arm when booting on an FVP using the boot-wrapper, the accesses
in gic_prio_init() end up being UNDEFINED and crashes the kernel during
boot.
This is a regression introduced by the addition of gic_prio_init().
Fix this by factoring out the SRE initialization into a new function and
calling it early in the three paths where SRE may not have been
initialized:
(1) gic_init_bases(), before the primary CPU pokes GICv3 sysregs in
gic_prio_init().
(2) gic_starting_cpu(), before secondary CPUs initialize GICv3 sysregs
in gic_cpu_init().
(3) gic_cpu_pm_notifier(), before CPUs re-initialize GICv3 sysregs in
gic_cpu_sys_reg_init().
Fixes: d447bf09a4 ("irqchip/gic-v3: Detect GICD_CTRL.DS and SCR_EL3.FIQ earlier")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Currently a number of SVE/SME related tests have almost identical
functions to enumerate all supported vector lengths. However over time
the copy&pasted code has diverged, allowing some bugs to creep in:
- fake_sigreturn_sme_change_vl reports a failure, not a SKIP if only
one vector length is supported (but the SVE version is fine)
- fake_sigreturn_sme_change_vl tries to set the SVE vector length, not
the SME one (but the other SME tests are fine)
- za_no_regs keeps iterating forever if only one vector length is
supported (but za_regs is correct)
Since those bugs seem to be mostly copy&paste ones, let's consolidate
the enumeration loop into one shared function, and just call that from
each test. That should fix the above bugs, and prevent similar issues
from happening again.
Fixes: 4963aeb35a ("kselftest/arm64: signal: Add SME signal handling tests")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240821164401.3598545-1-andre.przywara@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Set SW controlled i3c weak pull up and disable JTAG function on SDMMC IO.
The i3c weak pull up is activated to let all gpio banks be controlled
by the pinctrl driver.
Disabling the JTAG function lets the SDMMC core use its full IO width.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Acked-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240822195706.920567-3-detlev.casanova@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Instead of calling platform_get_resource_byname() and
devm_ioremap_resource(), simplify the code by simply calling
devm_platform_ioremap_resource_byname().
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240820124011.1788479-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240820123818.1788432-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240820123518.1788294-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add SOF support for ACP7.0 version based platform.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240823053739.465187-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add acpi machine id for ACP7.0 version based platform and configure
driver data to enable SOF sound card support on newer boards.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240823053739.465187-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many routes are just static, not modifiable at runtime. Show the route name
for all the other routes as an edge label in the generated graph.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20240823-dapm-graph-v1-3-989a47308c4c@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Read the bias_level debugfs files (ignored so far) and visualize the On/Off
state of each component using different graphic attributes in the generated
graph.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20240823-dapm-graph-v1-2-989a47308c4c@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Widgets not belonging to any component are currently represented inside a
cluster labeled "ROOT". This is not a correct representation of the actual
structure, as these widgets are not necessarily related to each other as
the ones inside actual components are.
Improve the graphical representation by not adding a cluster around these
widgets. Now a dot cluster represents a card component faithfully. This
will be particularly important with the upcoming improvements which will
visualize the component bias_level.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20240823-dapm-graph-v1-1-989a47308c4c@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are 2G and 4G RAM versions of the Lenovo Yoga Tab 3 X90F and it
turns out that the 2G version has a DMI product name of
"CHERRYVIEW D1 PLATFORM" where as the 4G version has
"CHERRYVIEW C0 PLATFORM". The sys-vendor + product-version check are
unique enough that the product-name check is not necessary.
Drop the product-name check so that the existing DMI match for the 4G
RAM version also matches the 2G RAM version.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240823074305.16873-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 13f58267cd ("ASoC: soc.h: don't create dummy Component
via COMP_DUMMY()") dummy codecs declared like this:
SND_SOC_DAILINK_DEF(dummy,
DAILINK_COMP_ARRAY(COMP_DUMMY()));
expand to:
static struct snd_soc_dai_link_component dummy[] = {
};
Which means that dummy is a zero sized array and thus dais[i].codecs should
not be dereferenced *at all* since it points to the address of the next
variable stored in the data section as the "dummy" variable has an address
but no size, so even dereferencing dais[0] is already an out of bounds
array reference.
Which means that the if (dais[i].codecs->name) check added in
commit 7d99a70b65 ("ASoC: Intel: Boards: Fix NULL pointer deref
in BYT/CHT boards") relies on that the part of the next variable which
the name member maps to just happens to be NULL.
Which apparently so far it usually is, except when it isn't
and then it results in crashes like this one:
[ 28.795659] BUG: unable to handle page fault for address: 0000000000030011
...
[ 28.795780] Call Trace:
[ 28.795787] <TASK>
...
[ 28.795862] ? strcmp+0x18/0x40
[ 28.795872] 0xffffffffc150c605
[ 28.795887] platform_probe+0x40/0xa0
...
[ 28.795979] ? __pfx_init_module+0x10/0x10 [snd_soc_sst_bytcr_wm5102]
Really fix things this time around by checking dais.num_codecs != 0.
Fixes: 7d99a70b65 ("ASoC: Intel: Boards: Fix NULL pointer deref in BYT/CHT boards")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240823074217.14653-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge the pmdomain fixes for v6.11-rc[n] into the next branch, to allow them
to get tested together with the new changes that are targeted for v6.12.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
It has turned out that having _set_required_opps() to recursively call
dev_pm_opp_set_opp() to set the required OPPs, doesn't really work as well
as we expected.
More precisely, at each recursive call to dev_pm_opp_set_opp() we are
changing an OPP for a required_dev that belongs to a required-OPP table.
The problem with this, is that we may have several devices sharing the same
required-OPP table, which leads to an incorrect behaviour in regards to
aggregating the per device votes.
To fix the problem for a required-OPP table belonging to a PM domain, which
is the only existing usecase for now, let's simply replace the call to
dev_pm_opp_set_opp() in _set_required_opps() by a call to _set_opp_level().
Moving forward we may potentially need to add support for other types of
required-OPP tables. In this case, the aggregation needs to be thought of.
Fixes: e37440e7e2 ("OPP: Call dev_pm_opp_set_opp() for required OPPs")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20240822224547.385095-2-ulf.hansson@linaro.org
RK3128 has a setting in GRF which selects whether the vpu attached iommu
uses the AXI clock of the decoder (vdpu) or the encoder (vepu). The
default is vepu but some part of the vendor firmware sets it to vdpu.
In order to be independent on whether any of those vendor firmware blobs is
used to boot the SoC reset "vpu main clock" setting to it's default value.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20240523185633.71355-3-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add IO voltage domains support for the RK3308 SoC.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521211029.1236094-11-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- request the wlan-enable GPIO "as-is" to fix an issue with the wifi
module being already powered up before linux boots
-----BEGIN PGP SIGNATURE-----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=d/4T
-----END PGP SIGNATURE-----
Merge tag 'pwrseq-fixes-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing fix from Bartosz Golaszewski:
- request the wlan-enable GPIO "as-is" to fix an issue with the wifi
module being already powered up before linux boots
* tag 'pwrseq-fixes-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: request the WLAN enable GPIO as-is
- imx: Remove duplicated clocks for scu power domain
- imx: Wait for SSAR to complete power-on for i.MX93 power domain
-----BEGIN PGP SIGNATURE-----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=eOzk
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
- imx: Remove duplicated clocks for scu power domain
- imx: Wait for SSAR to complete power-on for i.MX93 power domain
* tag 'pmdomain-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: wait SSAR when i.MX93 power domain on
pmdomain: imx: scu-pd: Remove duplicated clocks
As we discussed in the room at netdevconf earlier this week,
drop the requirement for special comment style for netdev.
For checkpatch, the general check accepts both right now, so
simply drop the special request there as well.
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clean up and reorder them according to the bit index. There is no
functional change.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240816221650.62295-1-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu_report_device_fault function was updated to return void while
assuming that drivers only need to call iommu_report_device_fault() for
reporting an iopf. This implementation causes following problems:
1. The drivers rely on the core code to call it's page_reponse,
however, when a fault is received and no fault capable domain is
attached / iopf_param is NULL, the ops->page_response is NOT called
causing the device to stall in case the fault type was PAGE_REQ.
2. The arm_smmu_v3 driver relies on the returned value to log errors
returning void from iommu_report_device_fault causes these events to
be missed while logging.
Modify the iommu_report_device_fault function to return -EINVAL for
cases where no fault capable domain is attached or iopf_param was NULL
and calls back to the driver (ops->page_response) in case the fault type
was IOMMU_FAULT_PAGE_REQ. The returned value can be used by the drivers
to log the fault/event as needed.
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Closes: https://lore.kernel.org/all/6147caf0-b9a0-30ca-795e-a1aa502a5c51@huawei.com/
Fixes: 3dfa64aecb ("iommu: Make iommu_report_device_fault() return void")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240816104906.1010626-1-praan@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Going forward, struct intel_display shall replace struct
drm_i915_private as the main display device data pointer type. Convert
intel_display_params.[ch] and intel_display_debugfs_params.[ch] to
struct intel_display.
Some stragglers are left behind where needed.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3e5cc1744eaf4708b08303e3e7e194035d7941cc.1724342644.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When building for xe, we get the context imbalance warning as the actual
locking/unlocking is not compiled:
../drivers/gpu/drm/i915/display/intel_vblank.c:306:13: warning: context imbalance in 'intel_vblank_section_enter' - wrong count at exit
../drivers/gpu/drm/i915/display/intel_vblank.c:314:13: warning: context imbalance in 'intel_vblank_section_exit' - wrong count at exit
Fix by adding separata stubs for xe without __acquires/__releases
annotation.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/111de5bee15f408de65b19ece4b68a7ac66b30cf.1724342644.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
- Don't drop references on LPIs that weren't visited by the
vgic-debug iterator
- Cure lock ordering issue when unregistering vgic redistributors
- Fix for misaligned stage-2 mappings when VMs are backed by hugetlb
pages
- Treat SGI registers as UNDEFINED if a VM hasn't been configured for
GICv3
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZsb21xccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFkrnAP943OLc8UYPCQruiNuzDvzjF4Sf
zI1bdOczyL7QerD/GAD/cVa6I9RigjI+QQd9JeY7V8FUpo6B0KejGvB6DPXIfA8=
=7wBh
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into for-next/fixes
KVM/arm64 fixes for 6.11, round #2
- Don't drop references on LPIs that weren't visited by the
vgic-debug iterator
- Cure lock ordering issue when unregistering vgic redistributors
- Fix for misaligned stage-2 mappings when VMs are backed by hugetlb
pages
- Treat SGI registers as UNDEFINED if a VM hasn't been configured for
GICv3
* tag 'kvmarm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm:
KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3
KVM: arm64: Ensure canonical IPA is hugepage-aligned when handling fault
KVM: arm64: vgic: Don't hold config_lock while unregistering redistributors
KVM: arm64: vgic-debug: Don't put unmarked LPIs
KVM: arm64: vgic: Hold config_lock while tearing down a CPU interface
KVM: selftests: arm64: Correct feature test for S1PIE in get-reg-list
KVM: arm64: Tidying up PAuth code in KVM
KVM: arm64: vgic-debug: Exit the iterator properly w/o LPI
KVM: arm64: Enforce dependency on an ARMv8.4-aware toolchain
docs: KVM: Fix register ID of SPSR_FIQ
KVM: arm64: vgic: fix unexpected unlock sparse warnings
KVM: arm64: fix kdoc warnings in W=1 builds
KVM: arm64: fix override-init warnings in W=1 builds
KVM: arm64: free kvm->arch.nested_mmus with kvfree()
