Make the ACPI thermal zone driver use the .should_bind() thermal zone
callback to provide the thermal core with the information on whether or
not to bind the given cooling device to the given trip point in the
given thermal zone. If it returns 'true', the thermal core will bind
the cooling device to the trip and the corresponding unbinding will be
taken care of automatically by the core on the removal of the involved
thermal zone or cooling device.
This replaces the .bind() and .unbind() thermal zone callbacks which
allows the code to be simplified quite significantly while providing
the same functionality.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/1812827.VLH7GnMWUR@rjwysocki.net
The current design of the code binding cooling devices to trip points in
thermal zones is convoluted and hard to follow.
Namely, a driver that registers a thermal zone can provide .bind()
and .unbind() operations for it, which are required to call either
thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip(),
respectively, or thermal_zone_bind_cooling_device() and
thermal_zone_unbind_cooling_device(), respectively, for every relevant
trip point and the given cooling device. Moreover, if .bind() is
provided and .unbind() is not, the cleanup necessary during the removal
of a thermal zone or a cooling device may not be carried out.
In other words, the core relies on the thermal zone owners to do the
right thing, which is error prone and far from obvious, even though all
of that is not really necessary. Specifically, if the core could ask
the thermal zone owner, through a special thermal zone callback, whether
or not a given cooling device should be bound to a given trip point in
the given thermal zone, it might as well carry out all of the binding
and unbinding by itself. In particular, the unbinding can be done
automatically without involving the thermal zone owner at all because
all of the thermal instances associated with a thermal zone or cooling
device going away must be deleted regardless.
Accordingly, introduce a new thermal zone operation, .should_bind(),
that can be invoked by the thermal core for a given thermal zone,
trip point and cooling device combination in order to check whether
or not the cooling device should be bound to the trip point at hand.
It takes an additional cooling_spec argument allowing the thermal
zone owner to specify the highest and lowest cooling states of the
cooling device and its weight for the given trip point binding.
Make the thermal core use this operation, if present, in the absence of
.bind() and .unbind(). Note that .should_bind() will be called under
the thermal zone lock.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/9334403.CDJkKcVGEf@rjwysocki.net
Since thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip()
acquire the thermal zone lock, the locking rules for their callers get
complicated. In particular, the thermal zone lock cannot be acquired
in any code path leading to one of these functions even though it might
be useful to do so.
To address this, remove the thermal zone locking from both these
functions, add lockdep assertions for the thermal zone lock to both
of them and make their callers acquire the thermal zone lock instead.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/3837835.kQq0lBPeGt@rjwysocki.net
Two sysfs show/store functions for attributes representing thermal
instances, trip_point_show() and weight_store(), retrieve the thermal
zone pointer from the instance object at hand, but they may also get
it from their dev argument, which is more consistent with what the
other thermal sysfs functions do, so make them do so.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/1987669.PYKUYFuaPT@rjwysocki.net
Because the trip and cdev pointers are sufficient to identify a thermal
instance holding them unambiguously, drop the additional thermal zone
checks from two loops walking the list of thermal instances in a
thermal zone.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/10527734.nUPlyArG6x@rjwysocki.net
It is not necessary to look up the thermal zone and the cooling device
in the respective global lists to check whether or not they are
registered. It is sufficient to check whether or not their respective
list nodes are empty for this purpose.
Use the above observation to simplify thermal_bind_cdev_to_trip(). In
addition, eliminate an unnecessary ternary operator from it.
Moreover, add lockdep_assert_held() for thermal_list_lock to it because
that lock must be held by its callers when it is running.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/3324214.44csPzL39Z@rjwysocki.net
Fold bind_cdev() into __thermal_cooling_device_register() and bind_tz()
into thermal_zone_device_register_with_trips() to reduce code bloat and
make it somewhat easier to follow the code flow.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/2962184.e9J7NaK4W3@rjwysocki.net
Introduce a facility allowing the thermal core functionality to be
exercised in a controlled way in order to verify its behavior, without
affecting its regular users noticeably.
It is based on the idea of preparing thermal zone templates along with
their trip points by writing to files in debugfs. When ready, those
templates can be used for registering test thermal zones with the
thermal core.
The temperature of a test thermal zone created this way can be adjusted
via debugfs, which also triggers a __thermal_zone_device_update() call
for it. By manipulating the temperature of a test thermal zone, one can
check if the thermal core reacts to the changes of it as expected.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6065927.lOV4Wx5bFT@rjwysocki.net
[ rjw: Fixed ordering of kcalloc() arguments ]
[ rjw: Fixed debugfs_create_dir() return value checks ]
[ rjw: Fixed two kerneldoc comments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In some cases, compilers don't set the location expression in DWARF
precisely. For instance, it may assign a variable to a register after
copying it from a different register. Then it should use the register
for the new type but still uses the old register. This makes hard to
track the type information properly.
This is an example I found in __tcp_transmit_skb(). The first argument
(sk) of this function is a pointer to sock and there's a variable (tp)
for tcp_sock.
static int __tcp_transmit_skb(struct sock *sk, struct sk_buff *skb,
int clone_it, gfp_t gfp_mask, u32 rcv_nxt)
{
...
struct tcp_sock *tp;
BUG_ON(!skb || !tcp_skb_pcount(skb));
tp = tcp_sk(sk);
prior_wstamp = tp->tcp_wstamp_ns;
tp->tcp_wstamp_ns = max(tp->tcp_wstamp_ns, tp->tcp_clock_cache);
...
So it basically calls tcp_sk(sk) to get the tcp_sock pointer from sk.
But it turned out to be the same value because tcp_sock embeds sock as
the first member. The sk is located in reg5 (RDI) and tp is in reg3
(RBX). The offset of tcp_wstamp_ns is 0x748 and tcp_clock_cache is
0x750. So you need to use RBX (reg3) to access the fields in the
tcp_sock. But the code used RDI (reg5) as it has the same value.
$ pahole --hex -C tcp_sock vmlinux | grep -e 748 -e 750
u64 tcp_wstamp_ns; /* 0x748 0x8 */
u64 tcp_clock_cache; /* 0x750 0x8 */
And this is the disassembly of the part of the function.
<__tcp_transmit_skb>:
...
44: mov %rdi, %rbx
47: mov 0x748(%rdi), %rsi
4e: mov 0x750(%rdi), %rax
55: cmp %rax, %rsi
Because compiler put the debug info to RBX, it only knows RDI is a
pointer to sock and accessing those two fields resulted in error
due to offset being beyond the type size.
-----------------------------------------------------------
find data type for 0x748(reg5) at __tcp_transmit_skb+0x63
CU for net/ipv4/tcp_output.c (die:0x817f543)
frame base: cfa=0 fbreg=6
scope: [1/1] (die:81aac3e)
bb: [0 - 30]
var [0] -0x98(stack) type='struct tcp_out_options' size=0x28 (die:0x81af3df)
var [5] reg8 type='unsigned int' size=0x4 (die:0x8180ed6)
var [5] reg2 type='unsigned int' size=0x4 (die:0x8180ed6)
var [5] reg1 type='int' size=0x4 (die:0x818059e)
var [5] reg4 type='struct sk_buff*' size=0x8 (die:0x8181360)
var [5] reg5 type='struct sock*' size=0x8 (die:0x8181a0c) <<<--- the first argument ('sk' at %RDI)
mov [19] reg8 -> -0xa8(stack) type='unsigned int' size=0x4 (die:0x8180ed6)
mov [20] stack canary -> reg0
mov [29] reg0 -> -0x30(stack) stack canary
bb: [36 - 3e]
mov [36] reg4 -> reg15 type='struct sk_buff*' size=0x8 (die:0x8181360)
bb: [44 - 63]
mov [44] reg5 -> reg3 type='struct sock*' size=0x8 (die:0x8181a0c) <<<--- calling tcp_sk()
var [47] reg3 type='struct tcp_sock*' size=0x8 (die:0x819eead) <<<--- new variable ('tp' at %RBX)
var [4e] reg4 type='unsigned long long' size=0x8 (die:0x8180edd)
mov [58] reg4 -> -0xc0(stack) type='unsigned long long' size=0x8 (die:0x8180edd)
chk [63] reg5 offset=0x748 ok=1 kind=1 (struct sock*) : offset bigger than size <<<--- access with old variable
final result: offset bigger than size
While it's a fault in the compiler, we could work around this issue by
using the type of new variable when it's copied directly. So I've added
copied_from field in the register state to track those direct register
to register copies. After that new register gets a new type and the old
register still has the same type, it'll update (copy it back) the type
of the old register.
For example, if we can update type of reg5 at __tcp_transmit_skb+0x47,
we can find the target type of the instruction at 0x63 like below:
-----------------------------------------------------------
find data type for 0x748(reg5) at __tcp_transmit_skb+0x63
...
bb: [44 - 63]
mov [44] reg5 -> reg3 type='struct sock*' size=0x8 (die:0x8181a0c)
var [47] reg3 type='struct tcp_sock*' size=0x8 (die:0x819eead)
var [47] copyback reg5 type='struct tcp_sock*' size=0x8 (die:0x819eead) <<<--- here
mov [47] 0x748(reg5) -> reg4 type='unsigned long long' size=0x8 (die:0x8180edd)
mov [4e] 0x750(reg5) -> reg0 type='unsigned long long' size=0x8 (die:0x8180edd)
mov [58] reg4 -> -0xc0(stack) type='unsigned long long' size=0x8 (die:0x8180edd)
chk [63] reg5 offset=0x748 ok=1 kind=1 (struct tcp_sock*) : Good! <<<--- new type
found by insn track: 0x748(reg5) type-offset=0x748
final result: type='struct tcp_sock' size=0xa98 (die:0x819eeb2)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240821232628.353177-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When checking the match variable at the target instruction, it might not
have any information if it's a first write to a stack slot. In this
case it could spill a register value into the stack so the type info is
in the source operand.
But currently it's hard to get the operand from the checking function.
Let's process the instruction and retry to get the type info from the
stack if there's no information already.
This is an example of __tcp_transmit_skb(). The instructions are
<__tcp_transmit_skb>:
0: nopl 0x0(%rax, %rax, 1)
5: push %rbp
6: mov %rsp, %rbp
9: push %r15
b: push %r14
d: push %r13
f: push %r12
11: push %rbx
12: sub $0x98, %rsp
19: mov %r8d, -0xa8(%rbp)
...
It cannot find any variable at -0xa8(%rbp) at this point.
-----------------------------------------------------------
find data type for -0xa8(reg6) at __tcp_transmit_skb+0x19
CU for net/ipv4/tcp_output.c (die:0x817f543)
frame base: cfa=0 fbreg=6
scope: [1/1] (die:81aac3e)
bb: [0 - 19]
var [0] -0x98(stack) type='struct tcp_out_options' size=0x28 (die:0x81af3df)
var [5] reg8 type='unsigned int' size=0x4 (die:0x8180ed6)
var [5] reg2 type='unsigned int' size=0x4 (die:0x8180ed6)
var [5] reg1 type='int' size=0x4 (die:0x818059e)
var [5] reg4 type='struct sk_buff*' size=0x8 (die:0x8181360)
var [5] reg5 type='struct sock*' size=0x8 (die:0x8181a0c)
chk [19] reg6 offset=-0xa8 ok=0 kind=0 fbreg : no type information
no type information
And it was able to find the type after processing the 'mov' instruction.
-----------------------------------------------------------
find data type for -0xa8(reg6) at __tcp_transmit_skb+0x19
CU for net/ipv4/tcp_output.c (die:0x817f543)
frame base: cfa=0 fbreg=6
scope: [1/1] (die:81aac3e)
bb: [0 - 19]
var [0] -0x98(stack) type='struct tcp_out_options' size=0x28 (die:0x81af3df)
var [5] reg8 type='unsigned int' size=0x4 (die:0x8180ed6)
var [5] reg2 type='unsigned int' size=0x4 (die:0x8180ed6)
var [5] reg1 type='int' size=0x4 (die:0x818059e)
var [5] reg4 type='struct sk_buff*' size=0x8 (die:0x8181360)
var [5] reg5 type='struct sock*' size=0x8 (die:0x8181a0c)
chk [19] reg6 offset=-0xa8 ok=0 kind=0 fbreg : retry <<<--- here
mov [19] reg8 -> -0xa8(stack) type='unsigned int' size=0x4 (die:0x8180ed6)
chk [19] reg6 offset=-0xa8 ok=0 kind=0 fbreg : Good!
found by insn track: -0xa8(reg6) type-offset=0
final result: type='unsigned int' size=0x4 (die:0x8180ed6)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240821232628.353177-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In check_matching_type(), it'd be easier to display the typename in
question if it's available.
For example, check out the line starts with 'chk'.
-----------------------------------------------------------
find data type for 0x10(reg0) at cpuacct_charge+0x13
CU for kernel/sched/build_utility.c (die:0x137ee0b)
frame base: cfa=1 fbreg=7
scope: [3/3] (die:13d9632)
bb: [c - 13]
var [c] reg5 type='struct task_struct*' size=0x8 (die:0x1381230)
mov [c] 0xdf8(reg5) -> reg0 type='struct css_set*' size=0x8 (die:0x1385c56)
chk [13] reg0 offset=0x10 ok=1 kind=1 (struct css_set*) : Good! <<<--- here
found by insn track: 0x10(reg0) type-offset=0x10
final result: type='struct css_set' size=0x250 (die:0x1385b0e)
Another example:
-----------------------------------------------------------
find data type for 0x8(reg0) at menu_select+0x279
CU for drivers/cpuidle/governors/menu.c (die:0x7b0fe79)
frame base: cfa=1 fbreg=7
scope: [2/2] (die:7b11010)
bb: [273 - 277]
bb: [279 - 279]
chk [279] reg0 offset=0x8 ok=0 kind=0 cfa : no type information
scope: [1/2] (die:7b10cbc)
bb: [0 - 64]
...
mov [26a] imm=0xffffffff -> reg15
bb: [273 - 277]
bb: [279 - 279]
chk [279] reg0 offset=0x8 ok=1 kind=1 (long long unsigned int) : no/void pointer <<<--- here
final result: no/void pointer
Also change some places to print negative offsets properly.
Before:
-----------------------------------------------------------
find data type for 0xffffff40(reg6) at __tcp_transmit_skb+0x58
After:
-----------------------------------------------------------
find data type for -0xc0(reg6) at __tcp_transmit_skb+0x58
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240821232628.353177-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Eduard Zingerman says:
====================
support bpf_fastcall patterns for calls to kfuncs
As an extension of [1], allow bpf_fastcall patterns for kfuncs:
- pattern rules are the same as for helpers;
- spill/fill removal is allowed only for kfuncs listed in the
is_fastcall_kfunc_call (under assumption that such kfuncs would
always be members of special_kfunc_list).
Allow bpf_fastcall rewrite for bpf_cast_to_kern_ctx() and
bpf_rdonly_cast() in order to conjure selftests for this feature.
After this patch-set verifier would rewrite the program below:
r2 = 1
*(u64 *)(r10 - 32) = r2
call %[bpf_cast_to_kern_ctx]
r2 = *(u64 *)(r10 - 32)
r0 = r2;"
As follows:
r2 = 1 /* spill/fill at r10[-32] is removed */
r0 = r1 /* replacement for bpf_cast_to_kern_ctx() */
r0 = r2
exit
Also, attribute used by LLVM implementation of the feature had been
changed from no_caller_saved_registers to bpf_fastcall (see [2]).
This patch-set replaces references to nocsr by references to
bpf_fastcall to keep LLVM and Kernel parts in sync.
[1] no_caller_saved_registers attribute for helper calls
https://lore.kernel.org/bpf/20240722233844.1406874-1-eddyz87@gmail.com/
[2] [BPF] introduce __attribute__((bpf_fastcall))
https://github.com/llvm/llvm-project/pull/105417
Changes v2->v3:
- added a patch fixing arch_mask handling in test_loader,
otherwise newly added tests for the feature were skipped
(a fix for regression introduced by a recent commit);
- fixed warning regarding unused 'params' variable;
- applied stylistical fixes suggested by Yonghong;
- added acks from Yonghong;
Changes v1->v2:
- added two patches replacing all mentions of nocsr by bpf_fastcall
(suggested by Andrii);
- removed KF_NOCSR flag (suggested by Yonghong).
v1: https://lore.kernel.org/bpf/20240812234356.2089263-1-eddyz87@gmail.com/
v2: https://lore.kernel.org/bpf/20240817015140.1039351-1-eddyz87@gmail.com/
====================
Link: https://lore.kernel.org/r/20240822084112.3257995-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use kfunc_bpf_cast_to_kern_ctx() and kfunc_bpf_rdonly_cast() to verify
that bpf_fastcall pattern is recognized for kfunc calls.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If test case does not specify architecture via __arch_* macro consider
that it should be run for all architectures.
Fixes: 7d743e4c75 ("selftests/bpf: __jited test tag to check disassembly after jit")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
do_misc_fixups() relaces bpf_cast_to_kern_ctx() and bpf_rdonly_cast()
by a single instruction "r0 = r1". This follows bpf_fastcall contract.
This commit allows bpf_fastcall pattern rewrite for these two
functions in order to use them in bpf_fastcall selftests.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Attribute used by LLVM implementation of the feature had been changed
from no_caller_saved_registers to bpf_fastcall (see [1]).
This commit replaces references to nocsr by references to bpf_fastcall
to keep LLVM and selftests parts in sync.
[1] https://github.com/llvm/llvm-project/pull/105417
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Attribute used by LLVM implementation of the feature had been changed
from no_caller_saved_registers to bpf_fastcall (see [1]).
This commit replaces references to nocsr by references to bpf_fastcall
to keep LLVM and Kernel parts in sync.
[1] https://github.com/llvm/llvm-project/pull/105417
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The __die_find_member_offset_cb() missed to handle bitfield members
which don't have DW_AT_data_member_location. Like in adding member
types in __add_member_cb() it should fallback to check the bit offset
when it resolves the member type for an offset.
Fixes: 437683a994 ("perf dwarf-aux: Handle type transfer for memory access")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240821232628.353177-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In arraymap.c:
In bpf_array_map_seq_start() and bpf_array_map_seq_next()
cast return values from the __percpu address space to
the generic address space via uintptr_t [1].
Correct the declaration of pptr pointer in __bpf_array_map_seq_show()
to void __percpu * and cast the value from the generic address
space to the __percpu address space via uintptr_t [1].
In hashtab.c:
Assign the return value from bpf_mem_cache_alloc() to void pointer
and cast the value to void __percpu ** (void pointer to percpu void
pointer) before dereferencing.
In memalloc.c:
Explicitly declare __percpu variables.
Cast obj to void __percpu **.
In helpers.c:
Cast ptr in BPF_CALL_1 and BPF_CALL_2 from generic address space
to __percpu address space via const uintptr_t [1].
Found by GCC's named address space checks.
There were no changes in the resulting object files.
[1] https://sparse.docs.kernel.org/en/latest/annotations.html#address-space-name
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240811161414.56744-1-ubizjak@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Eduard Zingerman says:
====================
bpf: fix null pointer access for malformed BPF_CORE_TYPE_ID_LOCAL relos
Liu RuiTong reported an in-kernel null pointer derefence when
processing BPF_CORE_TYPE_ID_LOCAL relocations referencing non-existing
BTF types. Fix this by adding proper id checks.
Changes v2->v3:
- selftest update suggested by Andrii:
avoid memset(0) for log buffer and do memset(0) for bpf_attr.
Changes v1->v2:
- moved check from bpf_core_calc_relo_insn() to bpf_core_apply()
now both in kernel and in libbpf relocation type id is guaranteed
to exist when bpf_core_calc_relo_insn() is called;
- added a test case.
v1: https://lore.kernel.org/bpf/20240821164620.1056362-1-eddyz87@gmail.com/
v2: https://lore.kernel.org/bpf/20240822001837.2715909-1-eddyz87@gmail.com/
====================
Link: https://lore.kernel.org/r/20240822080124.2995724-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Check that verifier rejects BPF program containing relocation
pointing to non-existent BTF type.
To force relocation resolution on kernel side test case uses
bpf_attr->core_relos field. This field is not exposed by libbpf,
so directly do BPF system call in the test.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822080124.2995724-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In case of malformed relocation record of kind BPF_CORE_TYPE_ID_LOCAL
referencing a non-existing BTF type, function bpf_core_calc_relo_insn
would cause a null pointer deference.
Fix this by adding a proper check upper in call stack, as malformed
relocation records could be passed from user space.
Simplest reproducer is a program:
r0 = 0
exit
With a single relocation record:
.insn_off = 0, /* patch first instruction */
.type_id = 100500, /* this type id does not exist */
.access_str_off = 6, /* offset of string "0" */
.kind = BPF_CORE_TYPE_ID_LOCAL,
See the link for original reproducer or next commit for a test case.
Fixes: 74753e1462 ("libbpf: Replace btf__type_by_id() with btf_type_by_id().")
Reported-by: Liu RuiTong <cnitlrt@gmail.com>
Closes: https://lore.kernel.org/bpf/CAK55_s6do7C+DVwbwY_7nKfUz0YLDoiA1v6X3Y9+p0sWzipFSA@mail.gmail.com/
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822080124.2995724-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
smb2_allocate_rsp_buf() will return other error code except -ENOMEM.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The variable is already true here.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
null-ptr-deref will occur when (req_op_level == SMB2_OPLOCK_LEVEL_LEASE)
and parse_lease_state() return NULL.
Fix this by check if 'lease_ctx_info' is NULL.
Additionally, remove the redundant parentheses in
parse_durable_handle_context().
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
In most error cases, error code is not returned in smb2_open(),
__process_request() will not print error message.
Fix this by returning the correct value at the end of smb2_open().
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When STATUS_NO_MORE_FILES status is set to smb2 query dir response,
->StructureSize is set to 9, which mean buffer has 1 byte.
This issue occurs because ->Buffer[1] in smb2_query_directory_rsp to
flex-array.
Fixes: eb3e28c1e8 ("smb3: Replace smb2pdu 1-element arrays with flex-arrays")
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
rht_bucket() does strange complicated things when a rehash is in
progress.
Instead, just skip scanning when a rehash is in progress: scanning is
going to be more expensive (many more empty slots to cover), and some
sort of infinite loop is being observed
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Additional changes:
- Add ref to common.yaml for child node.
- Add I2C node at example.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dtb: /soc@0/bus@30800000/i2c@30a40000/backlight@36:
failed to match any schema with compatible: ['ti,lm36922']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240821222001.591111-1-Frank.Li@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
Simplify the code a bunch by using managed resource helpers.
Also, there is no need to save clk pointer anymore.
Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Huan Yang <link@vivo.com>
Link: https://lore.kernel.org/r/20240821013725.785956-1-link@vivo.com
Signed-off-by: Lee Jones <lee@kernel.org>
Drop the manual access to the fwnode of the device to iterate over its
child nodes. `device_for_each_child_node` macro provides direct access
to the child nodes, and given that the `child` variable is only required
within the loop, the scoped variant of the macro can be used.
Use the `device_for_each_child_node_scoped` macro to iterate over the
direct child nodes of the device.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240820-device_child_node_access-v3-2-1ee09bdedb9e@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Describe what the subsystem does, how the consumers and providers work
and add API reference generated from kerneldocs.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240821100818.13763-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver only appears to have received sporadic clean-ups, typically
part of some tree-wide activity, and fixes for quite some time. And
according to the maintainer, Guo-Fu Tseng, the device has been EOLed for
a long time (see Link).
Accordingly, it seems appropriate to mark this driver as odd fixes.
Cc: Moon Yeounsu <yyyynoom@gmail.com>
Cc: Guo-Fu Tseng <cooldavid@cooldavid.org>
Link: https://lore.kernel.org/netdev/20240805003139.M94125@cooldavid.org/
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is part of an effort to assign a section in MAINTAINERS to header
files that relate to Networking. In this case the files with "net" or
"skbuff" in their name.
This patch adds a number of such files to the NETWORKING DRIVERS
and NETWORKING [GENERAL] sections.
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This aims to add limited globs to improve the coverage of header files
in the NETWORKING DRIVERS and NETWORKING [GENERAL] sections.
It is done so in a minimal way to exclude overlap with other sections.
And so as not to require "X" entries to exclude files otherwise
matched by these new globs.
While imperfect, due to it's limited nature, this does extend coverage
of header files by these sections. And aims to automatically cover
new files that seem very likely belong to these sections.
The include/linux/netdev* glob (both sections)
+ Subsumes the entries for:
- include/linux/netdevice.h
+ Extends the sections to cover
- include/linux/netdevice_xmit.h
- include/linux/netdev_features.h
The include/uapi/linux/netdev* globs: (both sections)
+ Subsumes the entries for:
- include/linux/netdevice.h
+ Extends the sections to cover
- include/linux/netdev.h
The include/linux/skbuff* glob (NETWORKING [GENERAL] section only):
+ Subsumes the entry for:
- include/linux/skbuff.h
+ Extends the section to cover
- include/linux/skbuff_ref.h
A include/uapi/linux/net_* glob was not added to the NETWORKING [GENERAL]
section. Although it would subsume the entry for
include/uapi/linux/net_namespace.h, which is fine, it would also extend
coverage to:
- include/uapi/linux/net_dropmon.h, which belongs to the
NETWORK DROP MONITOR section
- include/uapi/linux/net_tstamp.h which, as per an earlier patch in this
series, belongs to the SOCKET TIMESTAMPING section
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is part of an effort to assign a section in MAINTAINERS to header
files that relate to Networking. In this case the files with "net" in
their name.
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is part of an effort to assign a section in MAINTAINERS to header
files that relate to Networking. In this case the files with "net" in
their name.
It seems that sonet.h is included in ATM related source files,
and thus that ATM is the most relevant section for these files.
Cc: Chas Williams <3chas3@gmail.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-var-v1-16-1d0292802470@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
