__msg, __regex and __xlated tags are based on
__attribute__((btf_decl_tag("..."))) annotations.
Clang de-duplicates such annotations, e.g. the following
two sequences of tags are identical in final BTF:
/* seq A */ /* seq B */
__tag("foo") __tag("foo")
__tag("bar") __tag("bar")
__tag("foo")
Fix this by adding a unique suffix for each tag using __COUNTER__
pre-processor macro. E.g. here is a new definition for __msg:
#define __msg(msg) \
__attribute__((btf_decl_tag("comment:test_expect_msg=" XSTR(__COUNTER__) "=" msg)))
Using this definition the "seq A" from example above is translated to
BTF as follows:
[..] DECL_TAG 'comment:test_expect_msg=0=foo' type_id=X component_idx=-1
[..] DECL_TAG 'comment:test_expect_msg=1=bar' type_id=X component_idx=-1
[..] DECL_TAG 'comment:test_expect_msg=2=foo' type_id=X component_idx=-1
Surprisingly, this bug affects a single existing test:
verifier_spill_fill/old_stack_misc_vs_cur_ctx_ptr,
where sequence of identical messages was expected in the log.
Fixes: 537c3f66ea ("selftests/bpf: add generic BPF program tester-loader")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Suppose log="foo bar buz" and msg->substr="bar".
In such case current match processing logic would update 'log' as
follows: log += strlen(msg->substr); -> log += 3 -> log=" bar".
However, the intent behind the 'log' update is to make it point after
the successful match, e.g. to make log=" buz" in the example above.
Fixes: 4ef5d6af49 ("selftests/bpf: no need to track next_match_pos in struct test_loader")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When running test_loader based tests in the verbose mode each matched
message leaves a trace in the stderr, e.g.:
./test_progs -vvv -t ...
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
This is not very helpful when debugging such tests and clobbers the
log a lot.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since the register_ftrace_graph() assigns a new fgraph_ops to
fgraph_array before registring it by ftrace_startup_subops(), the new
fgraph_ops can be used in function_graph_enter().
In most cases, it is still OK because those fgraph_ops's hashtable is
already initialized by ftrace_set_filter*() etc.
But if a user registers a new fgraph_ops which does not initialize the
hash list, ftrace_ops_test() in function_graph_enter() causes a NULL
pointer dereference BUG because fgraph_ops->ops.func_hash is NULL.
This can be reproduced by the below commands because function profiler's
fgraph_ops does not initialize the hash list;
# cd /sys/kernel/tracing
# echo function_graph > current_tracer
# echo 1 > function_profile_enabled
To fix this problem, add a new fgraph_ops to fgraph_array after
ftrace_startup_subops(). Thus, until the new fgraph_ops is initialized,
we will see fgraph_stub on the corresponding fgraph_array entry.
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/172398528350.293426.8347220120333730248.stgit@devnote2
Fixes: c132be2c4f ("function_graph: Have the instances use their own ftrace_ops for filtering")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Andrii Nakryiko says:
====================
Support passing BPF iterator to kfuncs
Add support for passing BPF iterator state to any kfunc. Such kfunc has to
declare such argument with valid `struct bpf_iter_<type> *` type and should
use "__iter" suffix in argument name, following the established suffix-based
convention. We add a simple test/demo iterator getter in bpf_testmod.
====================
Link: https://lore.kernel.org/r/20240808232230.2848712-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Define BPF iterator "getter" kfunc, which accepts iterator pointer as
one of the arguments. Make sure that argument passed doesn't have to be
the very first argument (unlike new-next-destroy combo).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240808232230.2848712-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are potentially useful cases where a specific iterator type might
need to be passed into some kfunc. So, in addition to existing
bpf_iter_<type>_{new,next,destroy}() kfuncs, allow to pass iterator
pointer to any kfunc.
We employ "__iter" naming suffix for arguments that are meant to accept
iterators. We also enforce that they accept PTR -> STRUCT btf_iter_<type>
type chain and point to a valid initialized on-the-stack iterator state.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240808232230.2848712-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Verifier enforces that all iterator structs are named `bpf_iter_<name>`
and that whenever iterator is passed to a kfunc it's passed as a valid PTR ->
STRUCT chain (with potentially const modifiers in between).
We'll need this check for upcoming changes, so instead of duplicating
the logic, extract it into a helper function.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240808232230.2848712-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Few times, core1 was scheduled to boot first before core0, which leads
to error:
'k3_r5_rproc_start: can not start core 1 before core 0'.
This was happening due to some scheduling between prepare and start
callback. The probe function waits for event, which is getting
triggered by prepare callback. To avoid above condition move event
trigger to start instead of prepare callback.
Fixes: 61f6f68447 ("remoteproc: k3-r5: Wait for core0 power-up before powering up core1")
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
[ Applied wakeup event trigger only for Split-Mode booted rprocs ]
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240820105004.2788327-1-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The AM62x and AM64x SoCs of the TI K3 family has a Cortex M4F core in
the MCU domain. This core is typically used for safety applications in a
stand alone mode. However, some application (non safety related) may
want to use the M4F core as a generic remote processor with IPC to the
host processor. The M4F core has internal IRAM and DRAM memories and are
exposed to the system bus for code and data loading.
A remote processor driver is added to support this subsystem, including
being able to load and boot the M4F core. Loading includes to M4F
internal memories and predefined external code/data memories. The
carve outs for external contiguous memory is defined in the M4F device
node and should match with the external memory declarations in the M4F
image binary. The M4F subsystem has two resets. One reset is for the
entire subsystem i.e including the internal memories and the other, a
local reset is only for the M4F processing core. When loading the image,
the driver first releases the subsystem reset, loads the firmware image
and then releases the local reset to let the M4F processing core run.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240802152109.137243-4-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Building the TSP structure is common for users of the TI-SCI processor
control interface. Factor out this function and put it with the rest
of the TI-SCI processor control functions.
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240802152109.137243-3-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
K3 AM64x SoC has a Cortex M4F subsystem in the MCU voltage domain.
The remote processor's life cycle management and IPC mechanisms are
similar across the R5F and M4F cores from remote processor driver
point of view. However, there are subtle differences in image loading
and starting the M4F subsystems.
The YAML binding document provides the various node properties to be
configured by the consumers of the M4F subsystem.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240802152109.137243-2-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
wq->lockdep_map is set only after __alloc_workqueue()
successfully returns. However, on its error path
__alloc_workqueue() may call destroy_workqueue() which
expects wq->lockdep_map to be already set, which results
in a null-ptr-deref in touch_wq_lockdep_map().
Add a simple NULL-check to touch_wq_lockdep_map().
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:__lock_acquire+0x81/0x7800
[..]
Call Trace:
<TASK>
? __die_body+0x66/0xb0
? die_addr+0xb2/0xe0
? exc_general_protection+0x300/0x470
? asm_exc_general_protection+0x22/0x30
? __lock_acquire+0x81/0x7800
? mark_lock+0x94/0x330
? __lock_acquire+0x12fd/0x7800
? __lock_acquire+0x3439/0x7800
lock_acquire+0x14c/0x3e0
? __flush_workqueue+0x167/0x13a0
? __init_swait_queue_head+0xaf/0x150
? __flush_workqueue+0x167/0x13a0
__flush_workqueue+0x17d/0x13a0
? __flush_workqueue+0x167/0x13a0
? lock_release+0x50f/0x830
? drain_workqueue+0x94/0x300
drain_workqueue+0xe3/0x300
destroy_workqueue+0xac/0xc40
? workqueue_sysfs_register+0x159/0x2f0
__alloc_workqueue+0x1506/0x1760
alloc_workqueue+0x61/0x150
...
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Testing on LNL has shown media TLBs need to be invalidated via the GuC,
update xe_vm_invalidate_vma appropriately.
v2: Fix 2 tile case
v3: Include missing local change
Fixes: 3330361543 ("drm/xe/lnl: Add LNL platform definition")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820160129.986889-1-matthew.brost@intel.com
Free job depends on job->vm being valid, the last xe_exec_queue_put can
destroy the VM. Prevent UAF by freeing job before xe_exec_queue_put.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Jagmeet Randhawa <jagmeet.randhawa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820202309.1260755-1-matthew.brost@intel.com
(cherry picked from commit 32a42c93b7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The HW fence ctx objects are not ref counted rather tied to the life of
an LRC object. HW fences reference the HW fence ctx, HW fences can
outlive LRCs thus resulting in UAF. Drop the HW fence pointer to HW
fence ctx rather just store what is needed directly in HW fence.
v2:
- Fix typo in commit (Ashutosh)
- Use snprintf (Ashutosh)
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815193522.16008-1-matthew.brost@intel.com
(cherry picked from commit 60db6f540a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Free job depends on job->vm being valid, the last xe_exec_queue_put can
destroy the VM. Prevent UAF by freeing job before xe_exec_queue_put.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Jagmeet Randhawa <jagmeet.randhawa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820202309.1260755-1-matthew.brost@intel.com
Add MODULE_DEVICE_TABLE(), so modules could be properly
autoloaded based on the alias from platform_device_id table.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240821061955.2273782-3-lihongbo22@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly
autoloaded based on the alias from platform_device_id table.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240821061955.2273782-2-lihongbo22@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Qualcomm pd-mapper is a refcounted singleton, but the refcount is
never incremented, which means the as soon as any remoteproc instance
stops the count will hit 0.
At this point the pd-mapper QMI service is stopped, leaving firmware
without access to the PD information. Stopping any other remoteproc
instances will result in a use-after-free, which best case manifest
itself as a refcount underflow:
refcount_t: underflow; use-after-free.
WARNING: CPU: 1 PID: 354 at lib/refcount.c:87 refcount_dec_and_mutex_lock+0xc4/0x148
...
Call trace:
refcount_dec_and_mutex_lock+0xc4/0x148
qcom_pdm_remove+0x40/0x118 [qcom_pd_mapper]
...
Fix this by incrementing the refcount, so that the pd-mapper is only
torn down when the last remoteproc stops, as intended.
Fixes: 1ebcde047c ("soc: qcom: add pd-mapper implementation")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240820-pd-mapper-refcount-fix-v1-1-03ea65c0309b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Sometimes it's useful to organize member fields in cache-line boundary.
The 'typecln' sort key is short for type-cacheline and to show samples
in each cacheline. The cacheline size is fixed to 64 for now, but it
can read the actual size once it saves the value from sysfs.
For example, you maybe want to which cacheline in a target is hot or
cold. The following shows members in the cfs_rq's first cache line.
$ perf report -s type,typecln,typeoff -H
...
- 2.67% struct cfs_rq
+ 1.23% struct cfs_rq: cache-line 2
+ 0.57% struct cfs_rq: cache-line 4
+ 0.46% struct cfs_rq: cache-line 6
- 0.41% struct cfs_rq: cache-line 0
0.39% struct cfs_rq +0x14 (h_nr_running)
0.02% struct cfs_rq +0x38 (tasks_timeline.rb_leftmost)
...
Committer testing:
# root@number:~# perf report -s type,typecln,typeoff -H --stdio
# Total Lost Samples: 0
#
# Samples: 5K of event 'cpu_atom/mem-loads,ldlat=5/P'
# Event count (approx.): 312251
#
# Overhead Data Type / Data Type Cacheline / Data Type Offset
# .............. ..................................................
#
<SNIP>
0.07% struct sigaction
0.05% struct sigaction: cache-line 1
0.02% struct sigaction +0x58 (sa_mask)
0.02% struct sigaction +0x78 (sa_mask)
0.03% struct sigaction: cache-line 0
0.02% struct sigaction +0x38 (sa_mask)
0.01% struct sigaction +0x8 (sa_mask)
<SNIP>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819233603.54941-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'd be better to have them in hex to check cacheline alignment.
Percent offset size field
100.00 0 0x1c0 struct cfs_rq {
0.00 0 0x10 struct load_weight load {
0.00 0 0x8 long unsigned int weight;
0.00 0x8 0x4 u32 inv_weight;
};
0.00 0x10 0x4 unsigned int nr_running;
14.56 0x14 0x4 unsigned int h_nr_running;
0.00 0x18 0x4 unsigned int idle_nr_running;
0.00 0x1c 0x4 unsigned int idle_h_nr_running;
...
Committer notes:
Justification from Namhyung when asked about why it would be "better":
Cache line sizes are power of 2 so it'd be natural to use hex and
check whether an offset is in the same boundary. Also 'perf annotate'
shows instruction offsets in hex.
>
> Maybe this should be selectable?
I can add an option and/or a config if you want.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819233603.54941-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The SM8150 MTP board does not have magically different GPU than the
SM8150, so it cannot use amd,imageon compatible, also pointed by
dtbs_check:
sm8150-mtp.dtb: gpu@2c00000: compatible: 'oneOf' conditional failed, one must be fixed:
['qcom,adreno-640.1', 'qcom,adreno', 'amd,imageon'] is too long
'qcom,adreno-640.1' does not match '^qcom,adreno-[0-9a-f]{8}$'
'qcom,adreno-640.1' does not match '^amd,imageon-200\\.[0-1]$'
'amd,imageon' was expected
The incorrect amd,imageon compatible was added in commit f30ac26def
("arm64: dts: qcom: add sm8150 GPU nodes") to the SM8150 and later moved
to the SM8150 MTP board in commit 1642ab96ef ("arm64: dts: qcom:
sm8150: Don't start Adreno in headless mode") with an intention to allow
headless mode. This should be solved via proper driver quirks, not fake
compatibles.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240821140116.436441-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The check that map is NULL is already done in the bpf_map__fd(map) and
returns an errno, which does not run further checks.
In addition, even if the check for map is run, the return is a pointer,
which is not consistent with the err_number returned by bpf_map__fd(map).
Signed-off-by: Yang Ruibin <11162571@vivo.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: opensource.kernel@vivo.com
Link: https://lore.kernel.org/r/20240821101500.4568-1-11162571@vivo.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In check_matching_type(), it checks the type state of the register in a
wrong order. When it's the percpu pointer, it should check the type for
the pointer, but it checks the CFA bit first and thought it has no type
in the stack slot. This resulted in no type info.
-----------------------------------------------------------
find data type for 0x28(reg1) at hrtimer_reprogram+0x88
CU for kernel/time/hrtimer.c (die:0x18f219f)
frame base: cfa=1 fbreg=7
...
add [72] percpu 0x24500 -> reg1 pointer type='struct hrtimer_cpu_base' size=0x240 (die:0x18f6d46)
bb: [7a - 7e]
bb: [80 - 86] (here)
bb: [88 - 88] vvv
chk [88] reg1 offset=0x28 ok=1 kind=4 cfa : no type information
no type information
Here, instruction at 0x72 found reg1 has a (percpu) pointer and got the
correct type. But when it checks the final result, it wrongly thought
it was stack variable because it checks the cfa bit first.
After changing the order of state check:
-----------------------------------------------------------
find data type for 0x28(reg1) at hrtimer_reprogram+0x88
CU for kernel/time/hrtimer.c (die:0x18f219f)
frame base: cfa=1 fbreg=7
... (here)
vvvvvvvvvv
chk [88] reg1 offset=0x28 ok=1 kind=4 percpu ptr : Good!
found by insn track: 0x28(reg1) type-offset=0x28
final type: type='struct hrtimer_cpu_base' size=0x240 (die:0x18f6d46)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240821065408.285548-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes a compound type can have a single field and the size is the
same as the base type. But it's still preferred as struct or union
could carry more information than the base type.
Also put a slight priority on the typedef for the same reason.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240821065408.285548-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I found it missed to copy the immediate constant when it moves the
register value. This could result in a wrong type inference since the
address for the per-cpu variable would be 0 always.
Fixes: eb9190afae ("perf annotate-data: Handle ADD instructions")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240821065408.285548-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
qsi() executes the instruction qsi (query sample information)
and stores the result of the query in a sample information block
pointed to by the function argument. The instruction does not
change the condition code register. The return code is always
zero. No need to check for errors. Remove now unreferenced
macros PMC_FAILURE and RS_INIT_FAILURE_QSI.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
sf_disable() returns the condition code of instruction lsctl (load
sampling controls). However the parameter to lsctl() in
sf_disable() is a sample control block containing
all zeroes. This invocation of lsctl() does not fail and returns
always zero even when there is no authorization for sampling
on the machine. In short, sampling can be always turned off.
Ignore the return code of sf_disable() and change the function
return to void.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The dynamic debugging provides function names on request. So remove
all explicit function strings.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
[dengler: fix indent]
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The dynamic debugging provides function names on request. So remove
all explicit function strings.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The dynamic debugging provides function names on request. So remove
all explicit function strings.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The dynamic debugging provides function names on request. So remove
all explicit function strings.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The dynamic debugging provides function names on request. So remove
all explicit function strings.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
With the rework of the AP bus scan and the introduction of
a bindings complete completion also the timing until the
userspace finally receives a AP bus binding complete uevent
had increased. Unfortunately this event triggers some important
jobs for preparation of KVM guests, for example the modification
of card/queue masks to reassign AP resources to the alternate
AP queue device driver (vfio_ap) which is the precondition
for building mediated devices which may be a precondition for
starting KVM guests using AP resources.
This small fix now triggers the check for binding complete
each time an AP device driver has registered. With this patch
the bindings complete may be posted up to 30s earlier as there
is no need to wait for the next AP bus scan any more.
Fixes: 778412ab91 ("s390/ap: rearm APQNs bindings complete completion")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
SIE instruction performs faster when the virtual address of
SIE block matches the physical one. Pin the identity mapping
base to zero for the benefit of SIE and other instructions
that have similar performance impact. Still, randomize the
base when DEBUG_VM kernel configuration option is enabled.
Suggested-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The identity mapping position in virtual memory is randomized
together with the kernel mapping. That position can never
overlap with the lowcore even when the lowcore is relocated.
Prevent overlapping with the lowcore to allow independent
positioning of the identity mapping. With the current value
of the alternative lowcore address of 0x70000 the overlap
could happen in case the identity mapping is placed at zero.
This is a prerequisite for uncoupling of randomization base
of kernel image and identity mapping in virtual memory.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
soc-pcm.c has snd_soc_dpcm_stream_lock_irqsave_nested() /
snd_soc_dpcm_stream_unlock_irqrestore() helper function,
but it is almost nothing help. It just makes a code complex.
Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87msl6aa2c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove unnecessary line feed for tasdevice_codec_remove.
Add comma at the end the last member of the array.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20240821072527.1294-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the read-only array minCode_param on the stack at
run time, instead make it static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20240821114927.520193-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Pixel 3a returns 4291821499 (-3145797 or 0xFFCFFFBB) when attempting
to load the GPU firmware if tzmem is allowed. Disable it on SDM670 so
the GPU can successfully probe.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240730013834.41840-2-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When the pmic_glink state is UP and we either receive a protection-
domain (PD) notification indicating that the PD is going down, or that
the whole remoteproc is going down, it's expected that the pmic_glink
client instances are notified that their function has gone DOWN.
This is not what the code does, which results in the client state either
not updating, or being wrong in many cases. So let's fix the conditions.
Fixes: 58ef4ece1e ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240820-pmic-glink-v6-11-races-v3-3-eec53c750a04@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Commit '9329933699 ("soc: qcom: pmic_glink: Make client-lock
non-sleeping")' moved the pmic_glink client list under a spinlock, as it
is accessed by the rpmsg/glink callback, which in turn is invoked from
IRQ context.
This means that ucsi_unregister() is now called from atomic context,
which isn't feasible as it's expecting a sleepable context. An effort is
under way to get GLINK to invoke its callbacks in a sleepable context,
but until then lets schedule the unregistration.
A side effect of this is that ucsi_unregister() can now happen
after the remote processor, and thereby the communication link with it, is
gone. pmic_glink_send() is amended with a check to avoid the resulting NULL
pointer dereference.
This does however result in the user being informed about this error by
the following entry in the kernel log:
ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: failed to send UCSI write request: -5
Fixes: 9329933699 ("soc: qcom: pmic_glink: Make client-lock non-sleeping")
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240820-pmic-glink-v6-11-races-v3-2-eec53c750a04@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
As pointed out by Stephen Boyd it is possible that during initialization
of the pmic_glink child drivers, the protection-domain notifiers fires,
and the associated work is scheduled, before the client registration
returns and as a result the local "client" pointer has been initialized.
The outcome of this is a NULL pointer dereference as the "client"
pointer is blindly dereferenced.
Timeline provided by Stephen:
CPU0 CPU1
---- ----
ucsi->client = NULL;
devm_pmic_glink_register_client()
client->pdr_notify(client->priv, pg->client_state)
pmic_glink_ucsi_pdr_notify()
schedule_work(&ucsi->register_work)
<schedule away>
pmic_glink_ucsi_register()
ucsi_register()
pmic_glink_ucsi_read_version()
pmic_glink_ucsi_read()
pmic_glink_ucsi_read()
pmic_glink_send(ucsi->client)
<client is NULL BAD>
ucsi->client = client // Too late!
This code is identical across the altmode, battery manager and usci
child drivers.
Resolve this by splitting the allocation of the "client" object and the
registration thereof into two operations.
This only happens if the protection domain registry is populated at the
time of registration, which by the introduction of commit '1ebcde047c
("soc: qcom: add pd-mapper implementation")' became much more likely.
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Closes: https://lore.kernel.org/all/CAMi1Hd2_a7TjA7J9ShrAbNOd_CoZ3D87twmO5t+nZxC9sX18tA@mail.gmail.com/
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/all/ZqiyLvP0gkBnuekL@hovoldconsulting.com/
Reported-by: Stephen Boyd <swboyd@chromium.org>
Closes: https://lore.kernel.org/all/CAE-0n52JgfCBWiFQyQWPji8cq_rCsviBpW-m72YitgNfdaEhQg@mail.gmail.com/
Fixes: 58ef4ece1e ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240820-pmic-glink-v6-11-races-v3-1-eec53c750a04@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
For the MAC based integrity operation, the integrity key size (i.e.
key_mac_size) is currently set to the digest size of the used digest.
For wrapped key HMAC algorithms, the key size is independent of the
cryptographic key size. So there is no known size of the mac key in
such cases. The desired key size can optionally be specified as argument
when the dm-crypt device is configured via 'integrity_key_size:%u'.
If no integrity_key_size argument is specified, the mac key size
is still set to the digest size, as before.
Increase version number to 1.28.0 so that support for the new
argument can be detected by user space (i.e. cryptsetup).
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
To enable partial memory mapping of GPU virtual memory, it's
necessary to introduce an offset to the object's memory
(obj->mm.pages) scatterlist. This adjustment compensates for
instances when userspace mappings do not start from the beginning
of the object.
Based on a patch by Chris Wilson.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807100521.478266-3-andi.shyti@linux.intel.com
In preparation for the upcoming partial memory mapping feature,
we want to make sure that when looking for a node we consider
also the offset and not just the starting address of the virtual
memory node.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807100521.478266-2-andi.shyti@linux.intel.com
