Firmware supports two hcalls to send a sub-crq request:
H_SEND_SUB_CRQ_INDIRECT and H_SEND_SUB_CRQ. The indirect hcall allows
for submission of batched messages while the other hcall is limited to
only one message. This protocol is defined in PAPR section 17.2.3.3.
Previously, the ibmvnic xmit function only used the indirect hcall. This
allowed the driver to batch it's skbs. A single skb can occupy a few
entries per hcall depending on if FW requires skb header information or
not. The FW only needs header information if the packet is segmented.
By this logic, if an skb is not GSO then it can fit in one sub-crq
message and therefore is a candidate for H_SEND_SUB_CRQ.
Batching skb transmission is only useful when there are more packets
coming down the line (ie netdev_xmit_more is true).
As it turns out, H_SEND_SUB_CRQ induces less latency than
H_SEND_SUB_CRQ_INDIRECT. Therefore, use H_SEND_SUB_CRQ where
appropriate.
Small latency gains seen when doing TCP_RR_150 (request/response
workload). Ftrace results (graph-time=1):
Previous:
ibmvnic_xmit = 29618270.83 us / 8860058.0 hits = AVG 3.34
ibmvnic_tx_scrq_flush = 21972231.02 us / 6553972.0 hits = AVG 3.35
Now:
ibmvnic_xmit = 22153350.96 us / 8438942.0 hits = AVG 2.63
ibmvnic_tx_scrq_flush = 15858922.4 us / 6244076.0 hits = AVG 2.54
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://patch.msgid.link/20240807211809.1259563-6-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously when creating the header descriptors, the driver would:
1. allocate a temporary buffer on the stack (in build_hdr_descs_arr)
2. memcpy the header info into the temporary buffer (in build_hdr_data)
3. memcpy the temp buffer into a local variable (in create_hdr_descs)
4. copy the local variable into the return buffer (in create_hdr_descs)
Since, there is no opportunity for errors during this process, the temp
buffer is not needed and work can be done on the return buffer directly.
Repurpose build_hdr_data() to only calculate the header lengths. Rename
it to get_hdr_lens().
Edit create_hdr_descs() to read from the skb directly and copy directly
into the returned useful buffer.
The process now involves less memory and write operations while
also being more readable.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://patch.msgid.link/20240807211809.1259563-4-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the header length helper functions rather than trying to calculate
it within the driver. There are defined functions for mac and network
headers (skb_mac_header_len and skb_network_header_len) but no such
function exists for the transport header length.
Also, hdr_data was memset during allocation to all 0's so no need to
memset again.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://patch.msgid.link/20240807211809.1259563-3-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously, the driver would replenish the rx pool if the polling
function consumed less than the budget. The logic being that the driver
did not exhaust its budget so that must mean that the driver is not busy
and has cycles to spare for replenishing the pool.
So pool replenishment happens on every poll which did not consume
the budget. This can very costly during request-response tests.
In fact, an extra ~100pps can be seen in TCP_RR_150 tests when we remove
this conditional. Trace results (ftrace, graph-time=1) for the poll
function are below:
Previous results:
ibmvnic_poll = 64951846.0 us / 4167628.0 hits = AVG 15.58
replenish_rx_pool = 17602846.0 us / 4710437.0 hits = AVG 3.74
Now:
ibmvnic_poll = 57673941.0 us / 4791737.0 hits = AVG 12.04
replenish_rx_pool = 3938171.6 us / 4314.0 hits = AVG 912.88
While the replenish function takes longer, it is hit less frequently
meaning the ibmvnic_poll function, on average, is faster.
Furthermore, this change does not have a negative effect on
performance bandwidth/latency measurements.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://patch.msgid.link/20240807211809.1259563-2-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Building fs_enet on powerpc e500 leads to following warning:
CC drivers/net/ethernet/freescale/fs_enet/mac-scc.o
In file included from ./include/linux/build_bug.h:5,
from ./include/linux/container_of.h:5,
from ./include/linux/list.h:5,
from ./include/linux/module.h:12,
from drivers/net/ethernet/freescale/fs_enet/mac-scc.c:15:
drivers/net/ethernet/freescale/fs_enet/mac-scc.c: In function 'allocate_bd':
./include/linux/err.h:28:49: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
28 | #define IS_ERR_VALUE(x) unlikely((unsigned long)(void *)(x) >= (unsigned long)-MAX_ERRNO)
| ^
./include/linux/compiler.h:77:45: note: in definition of macro 'unlikely'
77 | # define unlikely(x) __builtin_expect(!!(x), 0)
| ^
drivers/net/ethernet/freescale/fs_enet/mac-scc.c:138:13: note: in expansion of macro 'IS_ERR_VALUE'
138 | if (IS_ERR_VALUE(fep->ring_mem_addr))
| ^~~~~~~~~~~~
This is due to fep->ring_mem_addr not being a pointer but a DMA
address which is 64 bits on that platform while pointers are
32 bits as this is a 32 bits platform with wider physical bus.
However, using fep->ring_mem_addr is just wrong because
cpm_muram_alloc() returns an offset within the muram and not
a physical address directly. So use fpi->dpram_offset instead.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/ec67ea3a3bef7e58b8dc959f7c17d405af0d27e4.1723101144.git.christophe.leroy@csgroup.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The usbnet_link_change function is not called, if the link has not changed.
...
[16913.807393][ 3] cdc_ether 1-2:2.0 enx00e0995fd1ac: kevent 12 may have been dropped
[16913.822266][ 2] cdc_ether 1-2:2.0 enx00e0995fd1ac: kevent 12 may have been dropped
[16913.826296][ 2] cdc_ether 1-2:2.0 enx00e0995fd1ac: kevent 11 may have been dropped
...
kevent 11 is scheduled too frequently and may affect other event schedules.
Signed-off-by: zhangxiangqian <zhangxiangqian@kylinos.cn>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/1723109985-11996-1-git-send-email-zhangxiangqian@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After enabling UDP GSO for devices not offering checksum offload, we have
hit a regression where a bad offload warning can be triggered when sending
a datagram with IPv6 extension headers.
Extend the UDP GSO IPv6 tests to cover this scenario.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-3-f5c5b4149ab9@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 10154dbded ("udp: Allow GSO transmit from devices with no
checksum offload") we have intentionally allowed UDP GSO packets marked
CHECKSUM_NONE to pass to the GSO stack, so that they can be segmented and
checksummed by a software fallback when the egress device lacks these
features.
What was not taken into consideration is that a CHECKSUM_NONE skb can be
handed over to the GSO stack also when the egress device advertises the
tx-udp-segmentation / NETIF_F_GSO_UDP_L4 feature.
This will happen when there are IPv6 extension headers present, which we
check for in __ip6_append_data(). Syzbot has discovered this scenario,
producing a warning as below:
ip6tnl0: caps=(0x00000006401d7869, 0x00000006401d7869)
WARNING: CPU: 0 PID: 5112 at net/core/dev.c:3293 skb_warn_bad_offload+0x166/0x1a0 net/core/dev.c:3291
Modules linked in:
CPU: 0 PID: 5112 Comm: syz-executor391 Not tainted 6.10.0-rc7-syzkaller-01603-g80ab5445da62 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024
RIP: 0010:skb_warn_bad_offload+0x166/0x1a0 net/core/dev.c:3291
[...]
Call Trace:
<TASK>
__skb_gso_segment+0x3be/0x4c0 net/core/gso.c:127
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x585/0x1120 net/core/dev.c:3661
__dev_queue_xmit+0x17a4/0x3e90 net/core/dev.c:4415
neigh_output include/net/neighbour.h:542 [inline]
ip6_finish_output2+0xffa/0x1680 net/ipv6/ip6_output.c:137
ip6_finish_output+0x41e/0x810 net/ipv6/ip6_output.c:222
ip6_send_skb+0x112/0x230 net/ipv6/ip6_output.c:1958
udp_v6_send_skb+0xbf5/0x1870 net/ipv6/udp.c:1292
udpv6_sendmsg+0x23b3/0x3270 net/ipv6/udp.c:1588
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xef/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2585
___sys_sendmsg net/socket.c:2639 [inline]
__sys_sendmmsg+0x3b2/0x740 net/socket.c:2725
__do_sys_sendmmsg net/socket.c:2754 [inline]
__se_sys_sendmmsg net/socket.c:2751 [inline]
__x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2751
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[...]
</TASK>
We are hitting the bad offload warning because when an egress device is
capable of handling segmentation offload requested by
skb_shinfo(skb)->gso_type, the chain of gso_segment callbacks won't produce
any segment skbs and return NULL. See the skb_gso_ok() branch in
{__udp,tcp,sctp}_gso_segment helpers.
To fix it, force a fallback to software USO when processing a packet with
IPv6 extension headers, since we don't know if these can checksummed by
all devices which offer USO.
Fixes: 10154dbded ("udp: Allow GSO transmit from devices with no checksum offload")
Reported-by: syzbot+e15b7e15b8a751a91d9a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000e1609a061d5330ce@google.com/
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-2-f5c5b4149ab9@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UDP segmentation offload inherently depends on checksum offload. It should
not be possible to disable checksum offload while leaving USO enabled.
Enforce this dependency in code.
There is a single tx-udp-segmentation feature flag to indicate support for
both IPv4/6, hence the devices wishing to support USO must offer checksum
offload for both IP versions.
Fixes: 10154dbded ("udp: Allow GSO transmit from devices with no checksum offload")
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-1-f5c5b4149ab9@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently ethtool_set_channel calls separate functions to check whether
the new channel number violates rss configuration or flow steering
configuration.
Very soon we need to check whether the new channel number violates
memory provider configuration as well.
To do all 3 checks cleanly, add a wrapper around
ethtool_get_max_rxnfc_channel() and ethtool_get_max_rxfh_channel(),
which does both checks. We can later extend this wrapper to add the
memory provider check in one place.
Note that in the current code, we put a descriptive genl error message
when we run into issues. To preserve the error message, we pass the
genl_info* to the common helper. The ioctl calls can pass NULL instead.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20240808205345.2141858-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GIpz
-----END PGP SIGNATURE-----
Merge tag '6.11-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- DFS fix
- fix for security flags for requiring encryption
- minor cleanup
* tag '6.11-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: cifs_inval_name_dfs_link_error: correct the check for fullpath
Fix spelling errors in Server Message Block
smb3: fix setting SecurityFlags when encryption is required
A few SPI fixes since the merge window, clock rate calculation fixes for
the Kunpeng and lpsi drivers and a missing registration of a device ID
for spidev (which had only been updated for DT cases, causing warnings).
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAma2p1kACgkQJNaLcl1U
h9Ab6Qf+Je5sY16uPQXVSVtKw/X5qonsXRaZxCqExxOvsPdtcEdsNsqub9WMvy0B
HOU8sHZQH+/Jkywof69EtNEv8gYJJ2el8Wc9MLTG8HoJDwSYsNbnkIEaTaiNwC+B
ELCPocwHglM28b91DX5umnvPj8vosEwO7eutxDqsArDAG43ZQAQ0EdbZx8N4f9/M
LhFtFiNE16sjoN5e28VBAwaQlwH6CEeZo4RJvGangYa7Mc1x/1/Jh2/qsPOqQnxU
AXmUp71VMjENe/PBZ3RwRUdxbTot6Sa7bSeQk8Irars1T/bF3h6qeF8We55KY8Ij
WTKcUCZS/3iCDfUZb+DnvGZpByzE5Q==
=kGYC
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few SPI fixes: clock rate calculation fixes for the Kunpeng and lpsi
drivers and a missing registration of a device ID for spidev (which
had only been updated for DT cases, causing warnings)"
* tag 'spi-fix-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-fsl-lpspi: Fix scldiv calculation
spi: spidev: Add missing spi_device_id for bh2228fv
spi: hisi-kunpeng: Add verification for the max_frequency provided by the firmware
spi: hisi-kunpeng: Add validation for the minimum value of speed_hz
On PREEMPT_RT, kfree() takes sleeping locks and must not be called with
preemption disabled. Therefore, on PREEMPT_RT skcipher_walk_done() must
not be called from within a kernel_fpu_{begin,end}() pair, even when
it's the last call which is guaranteed to not allocate memory.
Therefore, move the last skcipher_walk_done() in gcm_crypt() to the end
of the function so that it goes after the kernel_fpu_end(). To make
this work cleanly, rework the data processing loop to handle only
non-last data segments.
Fixes: b06affb1cb ("crypto: x86/aes-gcm - add VAES and AVX512 / AVX10 optimized AES-GCM")
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Closes: https://lore.kernel.org/linux-crypto/20240802102333.itejxOsJ@linutronix.de
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the missing clk_disable_unprepare() before return in
cctrng_resume().
Fixes: a583ed310b ("hwrng: cctrng - introduce Arm CryptoCell driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rockchip SoCs used to have a random number generator as part of their
crypto device, and support for it has to be added to the corresponding
driver. However newer Rockchip SoCs like the RK3568 have an independent
True Random Number Generator device. This patch adds a driver for it,
greatly inspired from the downstream driver.
The TRNG device does not seem to have a signal conditionner and the FIPS
140-2 test returns a lot of failures. They can be reduced by increasing
RK_RNG_SAMPLE_CNT, in a tradeoff between quality and speed. This value
has been adjusted to get ~90% of successes and the quality value has
been set accordingly.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
[daniel@makrotpia.org: code style fixes]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the True Random Number Generator on the Rockchip RK3568 SoC.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Switch cpumask_t to cpumask_var_t as the former may be too big
for the stack:
CC [M] drivers/crypto/caam/qi.o
CC [M] drivers/crypto/caam/caamalg_qi2.o
../drivers/crypto/caam/qi.c: In function ‘caam_qi_init’:
../drivers/crypto/caam/qi.c:808:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=]
808 | }
| ^
CHECK ../drivers/crypto/caam/qi.c
../drivers/crypto/caam/caamalg_qi2.c: In function ‘dpaa2_dpseci_setup’:
../drivers/crypto/caam/caamalg_qi2.c:5135:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=]
5135 | }
| ^
Also fix the error path handling in qi.c.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before commit addea5858b ("hwrng: Kconfig - Do not enable by default
CN10K driver") the Marvell CN10K Random Number Generator was always
enabled when HW_RANDOM was enabled.
This was changed with that commit to prevent having this driver being
always enabled on arm64. To prevent introducing regression with some old
defconfig enable the driver when ARCH_THUNDER is enabled.
Fixes: addea5858b ("hwrng: Kconfig - Do not enable by default CN10K driver")
Closes: https://lore.kernel.org/all/SN7PR18MB53144B37B82ADEEC5D35AE0CE3AC2@SN7PR18MB5314.namprd18.prod.outlook.com/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use a dummy xe_debugfs_register() if debugfs is not enabled and move all
debugfs-related files under `ifeq ($(CONFIG_DEBUG_FS),y)` in the
Makefile. This is similar to what was done for display in
commit 439987f6f4 ("drm/xe: don't build debugfs files when
CONFIG_DEBUG_FS=n").
This removes the following warning while loading xe with
CONFIG_DEUBG_FS=n:
xe 0000:03:00.0: [drm] Create GT directory failed
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240808171121.2484237-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Commit 04d82a6d08 ("binfmt_flat: allow not offsetting data start")
introduced a RISC-V specific variant of the FLAT format which does
not allocate any space for the (obsolete) array of shared library
pointers. However, it did not disable the code which initializes the
array, resulting in the corruption of sizeof(long) bytes before the DATA
segment, generally the end of the TEXT segment.
Introduce MAX_SHARED_LIBS_UPDATE which depends on the state of
CONFIG_BINFMT_FLAT_NO_DATA_START_OFFSET to guard the initialization of
the shared library pointer region so that it will only be initialized
if space is reserved for it.
Fixes: 04d82a6d08 ("binfmt_flat: allow not offsetting data start")
Co-developed-by: Stefan O'Rear <sorear@fastmail.com>
Signed-off-by: Stefan O'Rear <sorear@fastmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Link: https://lore.kernel.org/r/20240807195119.it.782-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Noticed with:
1 6.22 debian:experimental-x-mipsel : FAIL gcc version 13.2.0 (Debian 13.2.0-25)
builtin-daemon.c: In function 'cmd_session_list':
builtin-daemon.c:691:35: error: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'time_t' {aka 'long long int'} [-Werror=format=]
Use inttypes.h's PRIu64 to deal with that.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/ZplvH21aQ8pzmza_@x1
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
bcachefs_metadata_version_disk_accounting_v2 erroneously had padding
bytes in disk_accounting_key, which is a problem because we have to
guarantee that all unused bytes in disk_accounting_key are zeroed.
Fortunately 6.11 isn't out yet, so it's cheap to fix this by spinning a
new version.
Reported-by: Gabriel de Perthuis <g2p.code@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The cxl_test unit test environment on qemu always hits below call trace
with KASAN enabled:
BUG: KASAN: slab-out-of-bounds in cxl_setup_parent_dport+0x480/0x530 [cxl_core]
Read of size 1 at addr ff110000676014f8 by task (udev-worker)/676[ 24.424403] CPU: 2 PID: 676 Comm: (udev-worker) Tainted: G O N 6.10.0-qemucxl #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20240214-2.el9 02/14/2024
Call Trace:
<TASK>
dump_stack_lvl+0xea/0x150
print_report+0xce/0x610
? kasan_complete_mode_report_info+0x40/0x200
kasan_report+0xcc/0x110
__asan_report_load1_noabort+0x18/0x20
cxl_setup_parent_dport+0x480/0x530 [cxl_core]
cxl_mem_probe+0x49b/0xaa0 [cxl_mem]
cxl_test module models a CXL topology for testing, it creates some
emulated dports with platform devices in the CXL topology, so the
dport_dev of an emulated dport points to a platform device rather than a
pci device or a pci host bridge in the case. Currently,
cxl_setup_parent_dport() is used to set up RAS and AER capability on the
dport connected to the CXL memory device, but cxl_test does not support
RAS or AER functionality yet, so the fix is implementing a
__wrap_cxl_setup_parent_dport() to filter out all emulated dports,
guarantees only real dports can be handled by cxl_setup_parent_dport().
Fixes: f05fd10d13 ("cxl/pci: Add RCH downstream port AER register discovery")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Closes: https://lore.kernel.org/linux-cxl/ZrHTBp2O+HtUe6kt@xpf.sh.intel.com/T/#t
Signed-off-by: Li Ming <ming4.li@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240809082750.3015641-3-ming4.li@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
cxl_setup_parent_dport() needs to get RCH dport AER capability address
from RCRB to disable AER interrupt. The function does not check if dport
is RCH dport, it will get a wrong pci_host_bridge structure by dport_dev
in VH case because dport_dev points to a pci device(RP or switch DSP)
rather than a pci host bridge device.
Fixes: f05fd10d13 ("cxl/pci: Add RCH downstream port AER register discovery")
Signed-off-by: Li Ming <ming4.li@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240809082750.3015641-2-ming4.li@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
LLVM 19 is dropping support for 3DNow! in commit f0eb5587ceeb ("Remove
support for 3DNow!, both intrinsics and builtins. (#96246)"):
Remove support for 3DNow!, both intrinsics and builtins. (#96246)
This set of instructions was only supported by AMD chips starting in
the K6-2 (introduced 1998), and before the "Bulldozer" family
(2011). They were never much used, as they were effectively superseded
by the more-widely-implemented SSE (first implemented on the AMD side
in Athlon XP in 2001).
This is being done as a predecessor towards general removal of MMX
register usage. Since there is almost no usage of the 3DNow!
intrinsics, and no modern hardware even implements them, simple
removal seems like the best option.
Thus we should avoid passing these to the backend, since otherwise we
get a diagnostic about it:
'-3dnow' is not a recognized feature for this target (ignoring feature)
'-3dnowa' is not a recognized feature for this target (ignoring feature)
We could try to disable them only up to LLVM 19 (not the C side one,
but the one used by `rustc`, which may be built with a range of
LLVMs). However, to avoid more complexity, we can likely just remove
them altogether. According to Nikita [2]:
> I don't think it's needed because LLVM should not generate 3dnow
> instructions unless specifically asked to, using intrinsics that
> Rust does not provide in the first place.
Thus do so, like Rust did for one of their builtin targets [3].
For those curious: Clang will warn only about trying to enable them
(`-m3dnow{,a}`), but not about disabling them (`-mno-3dnow{,a}`), so
there is no change needed there.
Cc: Nikita Popov <github@npopov.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: x86@kernel.org
Link: f0eb5587ce [1]
Link: https://github.com/rust-lang/rust/pull/127864#issuecomment-2235898760 [2]
Link: https://github.com/rust-lang/rust/pull/127864 [3]
Closes: https://github.com/Rust-for-Linux/linux/issues/1094
Tested-by: Benno Lossin <benno.lossin@proton.me>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240806144558.114461-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When calling the `rust_is_available.sh` script, we need to make the
jobserver available to it, as commit ecab4115c4 ("kbuild: mark `rustc`
(and others) invocations as recursive") explains and did for the others.
Otherwise, we get a warning from `rustc` when calling `make rust-analyzer`
with parallel jobs, e.g. `-j8`. Using several jobs for that target does
not really matter, but developers may call `make` with jobs enabled in
all cases.
Thus fix it.
Fixes: 6dc9d9ca9a ("kbuild: rust-analyzer: better error handling")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240806233559.246705-1-ojeda@kernel.org
[ Reworded to add a couple more details mentioned in the list. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Alice reported [1] that an arm64 build failed with:
ld.lld: error: undefined symbol: __extendsfdf2
>>> referenced by core.a6f5fc5794e7b7b3-cgu.0
>>> rust/core.o:(<f32>::midpoint) in archive vmlinux.a
>>> referenced by core.a6f5fc5794e7b7b3-cgu.0
>>> rust/core.o:(<f32>::midpoint) in archive vmlinux.a
ld.lld: error: undefined symbol: __truncdfsf2
>>> referenced by core.a6f5fc5794e7b7b3-cgu.0
>>> rust/core.o:(<f32>::midpoint) in archive vmlinux.a
Rust 1.80.0 or later together with `CONFIG_CC_OPTIMIZE_FOR_SIZE=y`
is what triggers it.
In addition, x86_64 builds also fail the same way.
Similarly, compiling with Rust 1.82.0 (currently in nightly) makes
another one appear, possibly due to the LLVM 19 upgrade there:
ld.lld: error: undefined symbol: __eqdf2
>>> referenced by core.20495ea57a9f069d-cgu.0
>>> rust/core.o:(<f64>::next_up) in archive vmlinux.a
>>> referenced by core.20495ea57a9f069d-cgu.0
>>> rust/core.o:(<f64>::next_down) in archive vmlinux.a
Gary adds [1]:
> Usually the fix on rustc side is to mark those functions as `#[inline]`
>
> All of {midpoint,next_up,next_down} are indeed unstable functions not
> marked as inline...
Fix all those by adding those intrinsics to our usual workaround.
[ Trevor quickly submitted a fix to upstream Rust [2] that has already
been merged, to be released in Rust 1.82.0 (2024-10-17). - Miguel ]
Cc: Gary Guo <gary@garyguo.net>
Reported-by: Alice Ryhl <aliceryhl@google.com>
Closes: https://rust-for-linux.zulipchat.com/#narrow/stream/x/topic/x/near/455637364 [1]
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://github.com/rust-lang/rust/pull/128749 [2]
Link: https://lore.kernel.org/r/20240806150619.192882-1-ojeda@kernel.org
[ Shortened Zulip link. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
GCC 14 recently added -fmin-function-alignment option and the
root Makefile uses it to replace -falign-functions when available.
However, this flag can cause issues when passed to the Rust
Makefile and affect the bindgen process. Bindgen relies on
libclang to parse C code, and currently does not support the
-fmin-function-alignment flag, leading to compilation failures
when GCC 14 is used.
This patch addresses the issue by adding -fmin-function-alignment
to the bindgen_skip_c_flags in rust/Makefile. This prevents the
flag from causing compilation issues.
[ Matthew and Gary confirm function alignment should not change
the ABI in a way that bindgen would care about, thus we did
not need the extra logic for bindgen from v2. - Miguel ]
Link: https://lore.kernel.org/linux-kbuild/20240222133500.16991-1-petr.pavlu@suse.com/
Signed-off-by: Zehui Xu <zehuixu@whu.edu.cn>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240731134346.10630-1-zehuixu@whu.edu.cn
[ Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
client:
- fix null ptr deref
bridge:
- connector: fix double free
atomic:
- fix async flip update
panel:
- document panel
omap:
- add config dependency
tests:
- fix gem shmem test
drm buddy:
- Add start address to trim function
amdgpu:
- DMCUB fix
- Fix DET programming on some DCNs
- DCC fixes
- DCN 4.0.1 fixes
- SMU 14.0.x update
- MMHUB fix
- DCN 3.1.4 fix
- GC 12.0 fixes
- Fix soft recovery error propogation
- SDMA 7.0 fixes
- DSC fix
xe:
- Fix off-by-one when processing RTP rules
- Use dma_fence_chain_free in chain fence unused as a sync
- Fix PL1 disable flow in xe_hwmon_power_max_write
- Take ref to VM in delayed dump snapshot
i915:
- correct dual pps handling for MTL_PCH+ [display]
- Adjust vma offset for framebuffer mmap offset [gem]
- Fix Virtual Memory mapping boundaries calculation [gem]
- Allow evicting to use the requested placement
- Attempt to get pages without eviction first
-----BEGIN PGP SIGNATURE-----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=cBta
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-08-10' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly regular fixes, mostly amdgpu with i915/xe having a few each,
and then some misc bits across the board, seems about right for rc3
time.
client:
- fix null ptr deref
bridge:
- connector: fix double free
atomic:
- fix async flip update
panel:
- document panel
omap:
- add config dependency
tests:
- fix gem shmem test
drm buddy:
- Add start address to trim function
amdgpu:
- DMCUB fix
- Fix DET programming on some DCNs
- DCC fixes
- DCN 4.0.1 fixes
- SMU 14.0.x update
- MMHUB fix
- DCN 3.1.4 fix
- GC 12.0 fixes
- Fix soft recovery error propogation
- SDMA 7.0 fixes
- DSC fix
xe:
- Fix off-by-one when processing RTP rules
- Use dma_fence_chain_free in chain fence unused as a sync
- Fix PL1 disable flow in xe_hwmon_power_max_write
- Take ref to VM in delayed dump snapshot
i915:
- correct dual pps handling for MTL_PCH+ [display]
- Adjust vma offset for framebuffer mmap offset [gem]
- Fix Virtual Memory mapping boundaries calculation [gem]
- Allow evicting to use the requested placement
- Attempt to get pages without eviction first"
* tag 'drm-fixes-2024-08-10' of https://gitlab.freedesktop.org/drm/kernel: (31 commits)
drm/xe: Take ref to VM in delayed snapshot
drm/xe/hwmon: Fix PL1 disable flow in xe_hwmon_power_max_write
drm/xe: Use dma_fence_chain_free in chain fence unused as a sync
drm/xe/rtp: Fix off-by-one when processing rules
drm/amdgpu: Add DCC GFX12 flag to enable address alignment
drm/amdgpu: correct sdma7 max dw
drm/amdgpu: Add address alignment support to DCC buffers
drm/amd/display: Skip Recompute DSC Params if no Stream on Link
drm/amdgpu: change non-dcc buffer copy configuration
drm/amdgpu: Forward soft recovery errors to userspace
drm/amdgpu: add golden setting for gc v12
drm/buddy: Add start address support to trim function
drm/amd/display: Add missing program DET segment call to pipe init
drm/amd/display: Add missing DCN314 to the DML Makefile
drm/amdgpu: force to use legacy inv in mmhub
drm/amd/pm: update powerplay structure on smu v14.0.2/3
drm/amd/display: Add missing mcache registers
drm/amd/display: Add dcc propagation value
drm/amd/display: Add missing DET segments programming
drm/amd/display: Replace dm_execute_dmub_cmd with dc_wake_and_execute_dmub_cmd
...
Devices can provide multiple interrupt lines. One reason for this is that
a device has multiple subfunctions, each providing its own interrupt line.
Another reason is that a device can be designed to be used (also) on a
system where some of the interrupts can be routed to another processor.
A line often further acts as a demultiplex for specific interrupts
and has it's respective set of interrupt (status, mask, ack, ...)
registers.
Regmap supports the handling of these registers and demultiplexing
interrupts, but the interrupt domain code ends up assigning the same name
for the per interrupt line domains. This causes a naming collision in the
debugFS code and leads to confusion, as /proc/interrupts shows two separate
interrupts with the same domain name and hardware interrupt number.
Instead of adding a workaround in regmap or driver code, allow giving a
name suffix for the domain name when the domain is created.
Add a name_suffix field in the irq_domain_info structure and make
irq_domain_instantiate() use this suffix if it is given when a domain is
created.
[ tglx: Adopt it to the cleanup patch and fixup the invalid NULL return ]
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/871q2yvk5x.ffs@tglx
irq_domain_set_name() is truly unreadable gunk. Clean it up before adding
more.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/all/874j7uvkbm.ffs@tglx
