Add Bus Lock Detect (called Bus Lock Trap in AMD docs) support for AMD
platforms. Bus Lock Detect is enumerated with CPUID Fn0000_0007_ECX_x0
bit [24 / BUSLOCKTRAP]. It can be enabled through MSR_IA32_DEBUGCTLMSR.
When enabled, hardware clears DR6[11] and raises a #DB exception on
occurrence of Bus Lock if CPL > 0. More detail about the feature can be
found in AMD APM[1].
[1]: AMD64 Architecture Programmer's Manual Pub. 40332, Rev. 4.07 - June
2023, Vol 2, 13.1.3.6 Bus Lock Trap
https://bugzilla.kernel.org/attachment.cgi?id=304653
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/all/20240808062937.1149-3-ravi.bangoria@amd.com
Bus Lock Detect functionality on AMD platforms works identical to Intel.
Move split_lock and bus_lock specific code from intel.c to a dedicated
file so that it can be compiled and supported on non-Intel platforms.
Also, introduce CONFIG_X86_BUS_LOCK_DETECT, make it dependent on
CONFIG_CPU_SUP_INTEL and add compilation dependency of the new bus_lock.c
file on CONFIG_X86_BUS_LOCK_DETECT.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/all/20240808062937.1149-2-ravi.bangoria@amd.com
The 'at least one change' requirement is not applicable for context
creation, skip the check in such case.
This allows a command such as 'ethtool -X eth0 context new' to work.
The command works by mistake when using older versions of userspace
ethtool due to an incompatibility issue where rxfh.input_xfrm is passed
as zero (unset) instead of RXH_XFRM_NO_CHANGE as done with recent
userspace. This patch does not try to solve the incompatibility issue.
Link: https://lore.kernel.org/netdev/05ae8316-d3aa-4356-98c6-55ed4253c8a7@nvidia.com/
Fixes: 84a1d9c482 ("net: ethtool: extend RXNFC API to support RSS spreading of filter matches")
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20240807173352.3501746-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both ethtool_ops.rxfh_max_context_id and the default value used when
it's not specified are supposed to be exclusive maxima (the former
is documented as such; the latter, U32_MAX, cannot be used as an ID
since it equals ETH_RXFH_CONTEXT_ALLOC), but xa_alloc() expects an
inclusive maximum.
Subtract one from 'limit' to produce an inclusive maximum, and pass
that to xa_alloc().
Increase bnxt's max by one to prevent a (very minor) regression, as
BNXT_MAX_ETH_RSS_CTX is an inclusive max. This is safe since bnxt
is not actually hard-limited; BNXT_MAX_ETH_RSS_CTX is just a
leftover from old driver code that managed context IDs itself.
Rename rxfh_max_context_id to rxfh_max_num_contexts to make its
semantics (hopefully) more obvious.
Fixes: 847a8ab186 ("net: ethtool: let the core choose RSS context IDs")
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/5a2d11a599aa5b0cc6141072c01accfb7758650c.1723045898.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stack unwinding produces large amounts of uninteresting coverage.
It's called from KASAN kmalloc/kfree hooks, fault injection, etc.
It's not particularly useful and is not a function of system call args.
Ignore that code.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/eaf54b8634970b73552dcd38bf9be6ef55238c10.1718092070.git.dvyukov@google.com
module.c was renamed to main.c, but the Makefile directive was copy-pasted
verbatim with the old file name. Fix up the file name.
Fixes: cfc1d27789 ("module: Move all into module/")
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/bc0cf790b4839c5e38e2fafc64271f620568a39e.1718092070.git.dvyukov@google.com
Add a boot self test that can catch sprious coverage from interrupts.
The coverage callback filters out interrupt code, but only after the
handler updates preempt count. Some code periodically leaks out
of that section and leads to spurious coverage.
Add a best-effort (but simple) test that is likely to catch such bugs.
If the test is enabled on CI systems that use KCOV, they should catch
any issues fast.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/all/7662127c97e29da1a748ad1c1539dd7b65b737b2.1718092070.git.dvyukov@google.com
common_interrupt() and related variants call kvm_set_cpu_l1tf_flush_l1d(),
which is neither marked noinstr nor __always_inline.
So compiler puts it out of line and adds instrumentation to it. Since the
call is inside of instrumentation_begin/end(), objtool does not warn about
it.
The manifestation is that KCOV produces spurious coverage in
kvm_set_cpu_l1tf_flush_l1d() in random places because the call happens when
preempt count is not yet updated to say that the kernel is in an interrupt.
Mark kvm_set_cpu_l1tf_flush_l1d() as __always_inline and move it out of the
instrumentation_begin/end() section. It only calls __this_cpu_write()
which is already safe to call in noinstr contexts.
Fixes: 6368558c37 ("x86/entry: Provide IDTENTRY_SYSVEC")
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/3f9a1de9e415fcb53d07dc9e19fa8481bb021b1b.1718092070.git.dvyukov@google.com
Using FIELD_GET() fails in configurations that don't already include
the header file indirectly:
drivers/net/pse-pd/tps23881.c: In function 'tps23881_i2c_probe':
drivers/net/pse-pd/tps23881.c:755:13: error: implicit declaration of function 'FIELD_GET' [-Wimplicit-function-declaration]
755 | if (FIELD_GET(TPS23881_REG_DEVID_MASK, ret) != TPS23881_DEVICE_ID) {
| ^~~~~~~~~
Fixes: 89108cb5c2 ("net: pse-pd: tps23881: Fix the device ID check")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20240807075455.2055224-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some Wake-on-LAN modes such as WAKE_FILTER may only be supported by the MAC,
while others might be only supported by the PHY. Make sure that the .get_wol()
returns the union of both rather than only that of the PHY if the PHY supports
Wake-on-LAN.
Fixes: 7e400ff35c ("net: bcmgenet: Add support for PHY-based Wake-on-LAN")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240806175659.3232204-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dwmac4 was decoding the duplex mode from the GMAC_PHYIF_CONTROL_STATUS
register incorrectly, using GMAC_PHYIF_CTRLSTATUS_LNKMOD_MASK (value 1)
rather than GMAC_PHYIF_CTRLSTATUS_LNKMOD (bit 16). Fix this.
Fixes: 70523e639b ("drivers: net: stmmac: reworking the PCS code.")
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1sbJvd-001rGD-E3@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This per CPU log is becoming longer with more and more CPUs in system,
which slows down the boot process due to the serializing nature of
printk().
The value of this information is dubious and it can be retrieved by lscpu
from user space if required..
Downgrade the printk() to pr_debug() so it is still accessible for debug
purposes.
[ tglx: Massaged changelog ]
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240806120823.17111-1-lirongqing@baidu.com
Gpiolib framework has the implementation of setting up the
PUD configuration for GPIO pins but there is no driver support.
Add support to handle the PUD configuration request from the
userspace in samsung pinctrl driver.
Signed-off-by: Vishnu Reddy <vishnu.reddy@samsung.com>
Link: https://lore.kernel.org/r/20240729153631.24536-1-vishnu.reddy@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
for_each_child_of_node_scoped() handles the device_node automaticlly, so
switching over to it removes the device node cleanups and allows to return
directly from the loop.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240808031552.3156-1-zhangzekun11@huawei.com
mpic_of_init() contains the last case where the open coded IPI support
condition needs to be replaced with mpic_is_ipi_available() to keep the
code consistent.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
On platforms where MPIC is not the top-level interrupt controller the
driver currently only supports handling of the per-CPU interrupts (the
first 29 interrupts). This is obvious from the code of
mpic_handle_cascade_irq(), which reads only one cause register.
Bound the number of available interrupts in the interrupt domain to 29 for
these platforms.
The corresponding device-trees refer only to per-CPU interrupts via MPIC,
the other interrupts are referred to via GIC.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use MPIC_PER_CPU_IRQS_NR (29) bound instead of BITS_PER_LONG (32) when
iterating the bits of the per-CPU interrupt cause register, since there
are only 29 per-CPU interrupts. The top 3 bits are always zero anyway.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The number of per-CPU interrupts is 29 (0 to 28). This is described by
the constant MPIC_MAX_PER_CPU_IRQS, set to 28 (the maximum per-CPU
interrupt).
Commit 0fa4ce746d ("irqchip/armada-370-xp: Re-enable per-CPU
interrupts at resume time") used the constant incorrectly in the
for-loop, it used the operator < instead of <=, causing it to iterate
only the first 28 interrupts (0 to 27), ignoring the last, 28th,
per-CPU interrupt.
To avoid this kind of confusions, fix this issue by renaming the constant
to MPIC_PER_CPU_IRQS_NR and set it to 29, the number of per-CPU IRQs.
Update its use in mpic_is_percpu_irq() accordingly.
Fixes: 0fa4ce746d ("irqchip/armada-370-xp: Re-enable per-CPU interrupts at resume time")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable+noautosel@kernel.org> # The 29th interrupt is not used in any device-tree
Dynamically allocate the driver private structure. This concludes the
conversion of this driver to modern style.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In continuation of converting the driver to modern style, drop the
global pointer to the driver private structure and instead pass it
around the functions and callbacks, wherever possible. (There are 3
cases where it is not possible: mpic_cascaded_starting_cpu() and the
syscore operations mpic_suspend() and mpic_resume()).
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Put the MSI doorbell limits msi_doorbell_start, msi_doorbell_size and
msi_doorbell_mask into the driver private structure and get rid of the
corresponding functions.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In preparation for converting the driver to modern style put all the
interrupt controller private static variables into driver private
structure.
Access to these variables changes as:
main_int_base mpic->base
per_cpu_int_base mpic->per_cpu
mpic_domain mpic->domain
parent_irq mpic->parent_irq
...
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
For consistency with the rest of the driver, put the __init attribute
after the return type of the mpic_ipi_init() function.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add the __init attribute to the mpic_msi_init() function. It is only
called from the device initializer, and so can be dropped after boot is
complete.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Drop the msi_doorbell_end() function and related constants, it is not
used anymore.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Drop IPI_DOORBELL_START since it is not used and rename IPI_DOORBELL_END
to IPI_DOORBELL_NR.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
MTRRs have an obsolete fixed variant for fine grained caching control
of the 640K-1MB region that uses separate MSRs. This fixed variant has
a separate capability bit in the MTRR capability MSR.
So far all x86 CPUs which support MTRR have this separate bit set, so it
went unnoticed that mtrr_save_state() does not check the capability bit
before accessing the fixed MTRR MSRs.
Though on a CPU that does not support the fixed MTRR capability this
results in a #GP. The #GP itself is harmless because the RDMSR fault is
handled gracefully, but results in a WARN_ON().
Add the missing capability check to prevent this.
Fixes: 2b1f6278d7 ("[PATCH] x86: Save the MTRRs of the BSP before booting an AP")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240808000244.946864-1-ak@linux.intel.com
With the previous cleanups, the last remaining user of __i915_printk()
is i915_probe_error(). Switch that to use drm_dbg() and drm_err()
instead, dropping the request to report bugs in the few remaining
specific cases.
It's not common for drivers to log bug filing requests to begin with,
but these cases are in init, which is most likely to be tested in CI and
least likely to be hit by end users anyway.
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/be9baeab281f75999e96cc7ad1c06c6680494bc1.1722951405.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
aren't considered necessary for earlier kernels. 5 are MM and 4 are
non-MM. No identifiable theme here - please see the individual changelogs.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZrQhyAAKCRDdBJ7gKXxA
jvLLAP46sQ/HspAbx+5JoeKBTiX6XW4Hfd+MAk++EaTAyAhnxQD+Mfq7rPOIHm/G
wiXPVvLO8FEx0lbq06rnXvdotaWFrQg=
=mlE4
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-08-07-18-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Nine hotfixes. Five are cc:stable, the others either pertain to
post-6.10 material or aren't considered necessary for earlier kernels.
Five are MM and four are non-MM. No identifiable theme here - please
see the individual changelogs"
* tag 'mm-hotfixes-stable-2024-08-07-18-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
padata: Fix possible divide-by-0 panic in padata_mt_helper()
mailmap: update entry for David Heidelberg
memcg: protect concurrent access to mem_cgroup_idr
mm: shmem: fix incorrect aligned index when checking conflicts
mm: shmem: avoid allocating huge pages larger than MAX_PAGECACHE_ORDER for shmem
mm: list_lru: fix UAF for memory cgroup
kcov: properly check for softirq context
MAINTAINERS: Update LTP members and web
selftests: mm: add s390 to ARCH check
i915_report_error() presently acts as a wrapper for __i915_printk(). In
practice, it would be better to use drm level error reporting wherever
possible, so replace all uses of i915_report_error() with the equivalent
drm_err() call. These cases are not worth having a dedicated wrapper to
also print bug reporting info. Replacing the calls leaves
i915_report_error() with no users, so remove it.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/19eab020c57c0fa45acacf4e4a8077e57cd4d561.1722951405.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Commit 3e0bf9fde2 ("perf pmu: Restore full PMU name wildcard
support") adds a test case "PMU cmdline match" that covers PMU name
wildcard support provided by function perf_pmu__match().
The test works with a wide range of supported combinations of PMU name
matching but omits the case that if the perf_pmu__match() cannot match
the PMU name to the wildcard, it tries to match its alias. However, this
variable is not set up, causing the test case to fail when run with
subprocesses or to segfault if run as a single process.
./perf test -vv 9
9: Sysfs PMU tests :
9.1: Parsing with PMU format directory : Ok
9.2: Parsing with PMU event : Ok
9.3: PMU event names : Ok
9.4: PMU name combining : Ok
9.5: PMU name comparison : Ok
9.6: PMU cmdline match : FAILED!
./perf test -F 9
9.1: Parsing with PMU format directory : Ok
9.2: Parsing with PMU event : Ok
9.3: PMU event names : Ok
9.4: PMU name combining : Ok
9.5: PMU name comparison : Ok
Segmentation fault (core dumped)
Initialize the PMU alias to null for all tests of perf_pmu__match()
as this functionality is not being tested and the alias matching works
exactly the same as the matching of the PMU name.
./perf test -F 9
9.1: Parsing with PMU format directory : Ok
9.2: Parsing with PMU event : Ok
9.3: PMU event names : Ok
9.4: PMU name combining : Ok
9.5: PMU name comparison : Ok
9.6: PMU cmdline match : Ok
Fixes: 3e0bf9fde2 ("perf pmu: Restore full PMU name wildcard support")
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Radostin Stoyanov <rstoyano@redhat.com>
Link: https://lore.kernel.org/r/20240808103749.9356-1-vmolnaro@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The new CEC_MSG_FL_REPLY_VENDOR_ID flag only makes sense in combination
with CEC_MSG_VENDOR_COMMAND_WITH_ID. So rather than reporting an error
if that flag is set with another command, just clear the flag instead.
Only keep the message length check, since otherwise the flag would not
make sense.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The cec_msg_set_reply_to() helper function never zeroed the
struct cec_msg flags field, this can cause unexpected behavior
if flags was uninitialized to begin with.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 0dbacebede ("[media] cec: move the CEC framework out of staging and to media")
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit 2b3d047870 ("unicode: Add utf8-data module") changed the
database file from 'utf8data.h' to 'utf8data.c' to build separate
module, but it seems forgot to update Documentation/dontdiff. Remove
'utf8data.h' and add 'utf8data.c'.
Signed-off-by: ganjie <ganjie5@huawei.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240808085707.3235019-1-guoxuenan@huawei.com
In 'perf ftrace profile sleep 0.1' we know that we'll have an specific
kernel function that will take a bit more than 0.1 seconds and will take
place just one time, so we can add a check for that so that we validate
more than just the presence of some functions in the profile.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/lkml/ZrTBo7KACZeuCyLj@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The die_get_typename() would resolve typedef and get to the original
type. But sometimes the original type is a struct without name and it
makes the output confusing and hard to read.
This is a diff of perf report -s type before and after the change.
New types such as atomic{,64}_t and sigset_t appeared and the portion
of unnamed struct was reduced. Also u32, u64 and size_t were splitted
from the base types.
--- b 2024-08-01 17:02:34.307809952 -0700
+++ a 2024-08-07 14:17:05.245853999 -0700
- 2.40% long unsigned int
+ 2.26% long unsigned int
- 1.56% unsigned int
+ 1.27% unsigned int
- 0.98% struct
- 0.79% long long unsigned int
+ 0.58% long long unsigned int
+ 0.36% struct
+ 0.27% atomic64_t
+ 0.22% u32
+ 0.21% u64
+ 0.19% atomic_t
+ 0.13% size_t
- 0.08% struct seqcount_spinlock
+ 0.08% seqcount_spinlock_t
+ 0.08% sigset_t
+ 0.08% __poll_t
Let's use the typedef name directly and the resolved to get the size of
the type.
Committer testing:
root@x1:~# diff -u before after | head -30
--- before 2024-08-08 09:35:13.917325041 -0300
+++ after 2024-08-08 09:37:35.312257905 -0300
@@ -10,25 +10,27 @@
# ........ .........
#
79.40% (unknown)
- 2.28% union
1.96% (stack operation)
- 1.24% struct
+ 1.87% pthread_mutex_t
0.99% u32[]
- 0.92% unsigned int
0.77% struct task_struct
+ 0.75% U32
0.75% struct pcpu_hot
0.63% struct qspinlock
+ 0.61% atomic_t
0.59% struct list_head
- 0.58% int
0.53% struct cfs_rq
0.51% BYTE*
- 0.48% unsigned char
+ 0.48% BYTE
0.48% long unsigned int
0.46% struct rq
0.41% struct worker
0.41% struct memcg_vmstats_percpu
+ 0.41% pthread_cond_t
0.37% _Bool
+ 0.36% int
root@x1:~#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240807223129.1738004-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In find_data_type(), it creates and deletes a debug info whenver it
tries to find data type for a sample. This is inefficient and it most
likely accesses the same binary again and again.
Let's add a single entry cache the debug info structure for the last DSO.
Depending on sample data, it usually gives me 2~3x (and sometimes more)
speed ups.
Note that this will introduce a little difference in the output due to
the order of checking stack operations. It used to check the stack ops
before checking the availability of debug info but I moved it after the
symbol check. So it'll report stack operations in DSOs without debug
info as unknown. But I think it's ok and better to have the checking
near the caching logic.
Committer testing:
root@x1:~# perf mem record -a sleep 5s
root@x1:~# perf evlist
cpu_atom/mem-loads,ldlat=30/P
cpu_atom/mem-stores/P
dummy:u
root@x1:~# diff -u before after
--- before 2024-08-08 09:33:53.880780784 -0300
+++ after 2024-08-08 09:35:13.917325041 -0300
@@ -81,8 +81,8 @@
# Overhead Data Type
# ........ .........
#
- 55.43% (unknown)
- 11.61% (stack operation)
+ 55.56% (unknown)
+ 11.48% (stack operation)
4.93% struct pcpu_hot
3.26% unsigned int
2.48% struct
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240805234648.1453689-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
iter_finish_branch_entry() doesn't put the branch_info from/to map
elements creating memory leaks. This can be seen with:
```
$ perf record -e cycles -b perf test -w noploop
$ perf report -D
...
Direct leak of 984344 byte(s) in 123043 object(s) allocated from:
#0 0x7fb2654f3bd7 in malloc libsanitizer/asan/asan_malloc_linux.cpp:69
#1 0x564d3400d10b in map__get util/map.h:186
#2 0x564d3400d10b in ip__resolve_ams util/machine.c:1981
#3 0x564d34014d81 in sample__resolve_bstack util/machine.c:2151
#4 0x564d34094790 in iter_prepare_branch_entry util/hist.c:898
#5 0x564d34098fa4 in hist_entry_iter__add util/hist.c:1238
#6 0x564d33d1f0c7 in process_sample_event tools/perf/builtin-report.c:334
#7 0x564d34031eb7 in perf_session__deliver_event util/session.c:1655
#8 0x564d3403ba52 in do_flush util/ordered-events.c:245
#9 0x564d3403ba52 in __ordered_events__flush util/ordered-events.c:324
#10 0x564d3402d32e in perf_session__process_user_event util/session.c:1708
#11 0x564d34032480 in perf_session__process_event util/session.c:1877
#12 0x564d340336ad in reader__read_event util/session.c:2399
#13 0x564d34033fdc in reader__process_events util/session.c:2448
#14 0x564d34033fdc in __perf_session__process_events util/session.c:2495
#15 0x564d34033fdc in perf_session__process_events util/session.c:2661
#16 0x564d33d27113 in __cmd_report tools/perf/builtin-report.c:1065
#17 0x564d33d27113 in cmd_report tools/perf/builtin-report.c:1805
#18 0x564d33e0ccb7 in run_builtin tools/perf/perf.c:350
#19 0x564d33e0d45e in handle_internal_command tools/perf/perf.c:403
#20 0x564d33cdd827 in run_argv tools/perf/perf.c:447
#21 0x564d33cdd827 in main tools/perf/perf.c:561
...
```
Clearing up the map_symbols properly creates maps reference count
issues so resolve those. Resolving this issue doesn't improve peak
heap consumption for the test above.
Committer testing:
$ sudo dnf install libasan
$ make -k CORESIGHT=1 EXTRA_CFLAGS="-fsanitize=address" CC=clang O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20240807065136.1039977-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Calling VPC commands consists of several VPCW and VPCR ACPI calls.
These calls and their results can get mixed up if they are called
simultaneously from different threads, like acpi notify handler,
sysfs, debugfs, notification chain.
The commit e2ffcda162 ("ACPI: OSL: Allow Notify () handlers to run on
all CPUs") made the race issues much worse than before it but some
races were possible even before that commit.
Add a mutex to synchronize VPC commands.
Fixes: e2ffcda162 ("ACPI: OSL: Allow Notify () handlers to run on all CPUs")
Fixes: e82882cdd2 ("platform/x86: Add driver for Yoga Tablet Mode switch")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/f26782fa1194ad11ed5d9ba121a804e59b58b026.1721898747.git.soyer@irl.hu
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some models need to trigger the EC after each YMC event for the yoga
mode control to work properly. EC triggering consist of a VPC call from
the lenovo-ymc module. Except for this, all VPC calls are in the
ideapad-laptop module.
Since ideapad-laptop has a notification chain, a new YMC_EVENT action
can be added and triggered from the lenovo-ymc module. Then the
ideapad-laptop can trigger the EC.
If the triggering is in the ideapad-laptop module, then the ec_trigger
module parameter should be there as well.
Move the ymc_trigger_ec functionality and the ec_trigger module
parameter to the ideapad-laptop module.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/d980ab3ac32b5e554f456b0ff17279bfdbe2a203.1721898747.git.soyer@irl.hu
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
There are several cases where a notification chain can simplify Lenovo
WMI drivers.
Add a generic notification chain into ideapad-laptop.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/c5a43efae8a32bd034c3d19c0a686941347575a7.1721898747.git.soyer@irl.hu
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
If the Ambient Light Sensor (ALS) is disabled, the current code in the PMF
driver does not query for Human Presence Detection (HPD) data in
amd_pmf_get_sensor_info(). As a result, stale HPD data is used by PMF-TA
to evaluate policy conditions, leading to unexpected behavior in the policy
output actions.
To resolve this issue, modify the PMF driver to query HPD data
independently of ALS.
Since user_present is a boolean, modify the current code to return true if
the user is present and false if the user is away or if the sensor is not
detected, and report this status to the PMF TA firmware accordingly.
With this change, amd_pmf_get_sensor_info() now returns void instead of
int.
Fixes: cedecdba60 ("platform/x86/amd/pmf: Get ambient light information from AMD SFH driver")
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240730142316.3846259-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
