The current "nretries > 1 || nretries >= max_retries" check in
cs_watchdog_read() will always evaluate to true, and thus pr_warn(), if
nretries is greater than 1. The intent is instead to never warn on the
first try, but otherwise warn if the successful retry was the last retry.
Therefore, change that "||" to "&&".
Fixes: db3a34e174 ("clocksource: Retry clock read if long delays detected")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240802154618.4149953-2-paulmck@kernel.org
According to the data sheet, writing the MODE register should stop the
counter (and thus the interrupts). This appears to work on real hardware,
at least modern Intel and AMD systems. It should also work on Hyper-V.
However, on some buggy virtual machines the mode change doesn't have any
effect until the counter is subsequently loaded (or perhaps when the IRQ
next fires).
So, set MODE 0 and then load the counter, to ensure that those buggy VMs
do the right thing and the interrupts stop. And then write MODE 0 *again*
to stop the counter on compliant implementations too.
Apparently, Hyper-V keeps firing the IRQ *repeatedly* even in mode zero
when it should only happen once, but the second MODE write stops that too.
Userspace test program (mostly written by tglx):
=====
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <stdint.h>
#include <sys/io.h>
static __always_inline void __out##bwl(type value, uint16_t port) \
{ \
asm volatile("out" #bwl " %" #bw "0, %w1" \
: : "a"(value), "Nd"(port)); \
} \
\
static __always_inline type __in##bwl(uint16_t port) \
{ \
type value; \
asm volatile("in" #bwl " %w1, %" #bw "0" \
: "=a"(value) : "Nd"(port)); \
return value; \
}
BUILDIO(b, b, uint8_t)
#define inb __inb
#define outb __outb
#define PIT_MODE 0x43
#define PIT_CH0 0x40
#define PIT_CH2 0x42
static int is8254;
static void dump_pit(void)
{
if (is8254) {
// Latch and output counter and status
outb(0xC2, PIT_MODE);
printf("%02x %02x %02x\n", inb(PIT_CH0), inb(PIT_CH0), inb(PIT_CH0));
} else {
// Latch and output counter
outb(0x0, PIT_MODE);
printf("%02x %02x\n", inb(PIT_CH0), inb(PIT_CH0));
}
}
int main(int argc, char* argv[])
{
int nr_counts = 2;
if (argc > 1)
nr_counts = atoi(argv[1]);
if (argc > 2)
is8254 = 1;
if (ioperm(0x40, 4, 1) != 0)
return 1;
dump_pit();
printf("Set oneshot\n");
outb(0x38, PIT_MODE);
outb(0x00, PIT_CH0);
outb(0x0F, PIT_CH0);
dump_pit();
usleep(1000);
dump_pit();
printf("Set periodic\n");
outb(0x34, PIT_MODE);
outb(0x00, PIT_CH0);
outb(0x0F, PIT_CH0);
dump_pit();
usleep(1000);
dump_pit();
dump_pit();
usleep(100000);
dump_pit();
usleep(100000);
dump_pit();
printf("Set stop (%d counter writes)\n", nr_counts);
outb(0x30, PIT_MODE);
while (nr_counts--)
outb(0xFF, PIT_CH0);
dump_pit();
usleep(100000);
dump_pit();
usleep(100000);
dump_pit();
printf("Set MODE 0\n");
outb(0x30, PIT_MODE);
dump_pit();
usleep(100000);
dump_pit();
usleep(100000);
dump_pit();
return 0;
}
=====
Suggested-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhkelley@outlook.com>
Link: https://lore.kernel.org/all/20240802135555.564941-2-dwmw2@infradead.org
Leaving the PIT interrupt running can cause noticeable steal time for
virtual guests. The VMM generally has a timer which toggles the IRQ input
to the PIC and I/O APIC, which takes CPU time away from the guest. Even
on real hardware, running the counter may use power needlessly (albeit
not much).
Make sure it's turned off if it isn't going to be used.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhkelley@outlook.com>
Link: https://lore.kernel.org/all/20240802135555.564941-1-dwmw2@infradead.org
These are three important bug fixes for the cross-architecture tree,
fixing a regression with the new syscall.tbl file, the inconsistent
numbering for the new uretprobe syscall and a bug with iowrite64be
on alpha.
-----BEGIN PGP SIGNATURE-----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=0iyr
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"These are three important bug fixes for the cross-architecture tree,
fixing a regression with the new syscall.tbl file, the inconsistent
numbering for the new uretprobe syscall and a bug with iowrite64be on
alpha"
* tag 'asm-generic-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: fix syscall macros for newfstat/newfstatat
uretprobe: change syscall number, again
alpha: fix ioread64be()/iowrite64be() helpers
A small collection of fixes:
- Revert of FireWire changes that caused a long-time regression
- Another long-time regression fix for AMD HDMI
- MIDI2 UMP fixes
- HD-audio Conexant codec fixes and a qurik
-----BEGIN PGP SIGNATURE-----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=tMqd
-----END PGP SIGNATURE-----
Merge tag 'sound-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A small collection of fixes:
- Revert of FireWire changes that caused a long-time regression
- Another long-time regression fix for AMD HDMI
- MIDI2 UMP fixes
- HD-audio Conexant codec fixes and a quirk"
* tag 'sound-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: Conditionally use snooping for AMD HDMI
ALSA: usb-audio: Correct surround channels in UAC1 channel map
ALSA: seq: ump: Explicitly reset RPN with Null RPN
ALSA: seq: ump: Transmit RPN/NRPN message at each MSB/LSB data reception
ALSA: seq: ump: Use the common RPN/bank conversion context
ALSA: ump: Explicitly reset RPN with Null RPN
ALSA: ump: Transmit RPN/NRPN message at each MSB/LSB data reception
Revert "ALSA: firewire-lib: operate for period elapse event in process context"
Revert "ALSA: firewire-lib: obsolete workqueue for period update"
ALSA: hda/realtek: Add quirk for Acer Aspire E5-574G
ALSA: seq: ump: Optimize conversions from SysEx to UMP
ALSA: hda/conexant: Mute speakers at suspend / shutdown
ALSA: hda/generic: Add a helper to mute speakers at suspend/shutdown
ALSA: hda: conexant: Fix headset auto detect fail in the polling mode
client:
- fix error code
atomic:
- allow damage clips with async flips
- allow explicit sync with async flips
kselftests:
- fix dmabuf-heaps test
panic:
- fix schedule_work in panic paths
panel:
- fix OrangePi Neo orientation
gpuvm:
- fix missing dependency
amdgpu:
- SMU 14.x update
- Fix contiguous VRAM handling for IB parsing
- GFX 12 fix
- Regression fix for old APUs
i915:
- Static analysis fix for int overflow
- Fix for HDCP2_STREAM_STATUS macro and removal of PWR_CLK_STATE for gen12
nouveau:
- revert busy wait change that caused a resume regression
- fix buffer placement fault on dynamic pm s/r
- fix refcount underflow
ast:
- fix black screen on resume
- wake during connector status detect
v3d:
- fix issues with perf/timestamp ioctls
vmwgfx:
- fix deadlock in dma-buf fence polling
- fix screen surface refcounting
- fix dumb buffer handling
- fix support for external buffers
- fix overlay with screen targets
- trigger modeset on screen moves
-----BEGIN PGP SIGNATURE-----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=mHpM
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-08-02' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Regular weekly fixes. This is a bit larger than usual but doesn't seem
too crazy.
Most of it is vmwgfx changes that fix a bunch of issues with wayland
userspaces with dma-buf/external buffers and modesetting fixes.
Otherwise it's kinda spread out, v3d fixes some new ioctls, nouveau
has regression revert and fixes, amdgpu, i915 and ast have some small
fixes, and some core fixes spread about.
client:
- fix error code
atomic:
- allow damage clips with async flips
- allow explicit sync with async flips
kselftests:
- fix dmabuf-heaps test
panic:
- fix schedule_work in panic paths
panel:
- fix OrangePi Neo orientation
gpuvm:
- fix missing dependency
amdgpu:
- SMU 14.x update
- Fix contiguous VRAM handling for IB parsing
- GFX 12 fix
- Regression fix for old APUs
i915:
- Static analysis fix for int overflow
- Fix for HDCP2_STREAM_STATUS macro and removal of PWR_CLK_STATE for gen12
nouveau:
- revert busy wait change that caused a resume regression
- fix buffer placement fault on dynamic pm s/r
- fix refcount underflow
ast:
- fix black screen on resume
- wake during connector status detect
v3d:
- fix issues with perf/timestamp ioctls
vmwgfx:
- fix deadlock in dma-buf fence polling
- fix screen surface refcounting
- fix dumb buffer handling
- fix support for external buffers
- fix overlay with screen targets
- trigger modeset on screen moves"
* tag 'drm-fixes-2024-08-02' of https://gitlab.freedesktop.org/drm/kernel: (31 commits)
Revert "nouveau: rip out busy fence waits"
nouveau: set placement to original placement on uvmm validate.
drm/atomic: Allow userspace to use damage clips with async flips
drm/atomic: Allow userspace to use explicit sync with atomic async flips
drm/i915: Fix possible int overflow in skl_ddi_calculate_wrpll()
drm/i915/hdcp: Fix HDCP2_STREAM_STATUS macro
drm/ast: astdp: Wake up during connector status detection
i915/perf: Remove code to update PWR_CLK_STATE for gen12
kselftests: dmabuf-heaps: Ensure the driver name is null-terminated
drm/client: Fix error code in drm_client_buffer_vmap_local()
drm/amdgpu: Fix APU handling in amdgpu_pm_load_smu_firmware()
drm/amdgpu: increase mes log buffer size for gfx12
drm/amdgpu: fix contiguous handling for IB parsing v2
drm/amdgpu/pm: support gpu_metrics sysfs interface for smu v14.0.2/3
drm/vmwgfx: Trigger a modeset when the screen moves
drm/vmwgfx: Fix overlay when using Screen Targets
drm/vmwgfx: Add basic support for external buffers
drm/vmwgfx: Fix handling of dumb buffers
drm/vmwgfx: Make sure the screen surface is ref counted
drm/vmwgfx: Fix a deadlock in dma buf fence polling
...
NetApp server requires the file to be open with FILE_READ_EA access in
order to support FSCTL_GET_REPARSE_POINT, otherwise it will return
STATUS_INVALID_DEVICE_REQUEST. It doesn't make any sense because
there's no requirement for FILE_READ_EA bit to be set nor
STATUS_INVALID_DEVICE_REQUEST being used for something other than
"unsupported reparse points" in MS-FSA.
To fix it and improve compatibility, set FILE_READ_EA & SYNCHRONIZE
bits to match what Windows client currently does.
Tested-by: Sebastian Steinbeisser <Sebastian.Steinbeisser@lrz.de>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For debugging an umount failure in xfstests generic/043 generic/044 in some
configurations, we needed more information on the shutdown ioctl which
was suspected of being related to the cause, so tracepoints are added
in this patch e.g.
"trace-cmd record -e smb3_shutdown_enter -e smb3_shutdown_done -e smb3_shutdown_err"
Sample output:
godown-47084 [011] ..... 3313.756965: smb3_shutdown_enter: flags=0x1 tid=0x733b3e75
godown-47084 [011] ..... 3313.756968: smb3_shutdown_done: flags=0x1 tid=0x733b3e75
Tested-by: Anthony Nandaa (Microsoft) <profnandaa@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Remove struct cifs_aio_ctx and its associated alloc/release functions as it
is no longer used, the functions being taken over by netfslib.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
As per MS-FSA 2.1.5.10.14, support for FSCTL_GET_REPARSE_POINT is
optional and if the server doesn't support it,
STATUS_INVALID_DEVICE_REQUEST must be returned for the operation.
If we find files with reparse points and we can't read them due to
lack of client or server support, just ignore it and then treat them
as regular files or junctions.
Fixes: 5f71ebc412 ("smb: client: parse reparse point flag in create response")
Reported-by: Sebastian Steinbeisser <Sebastian.Steinbeisser@lrz.de>
Tested-by: Sebastian Steinbeisser <Sebastian.Steinbeisser@lrz.de>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
- Add missing power-domains property to the device tree bindings for
the Rockchip Designware AHCI adapter (from Heiko).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZqwqTwAKCRDdoc3SxdoY
dhkCAQD0oT7lUIP+h9ZsIaAhKLqnFWm+fJ1fLVUwljRhUcRNugEAzFAvyczllzId
8xGBos1JnbBYbwcRMLp54auj+uffjAQ=
=b8I2
-----END PGP SIGNATURE-----
Merge tag 'ata-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Damien Le Moal:
- Add missing power-domains property to the device tree bindings for
the Rockchip Designware AHCI adapter (from Heiko)
* tag 'ata-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
dt-bindings: ata: rockchip-dwc-ahci: add missing power-domains
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZqvoJgAKCRBZ7Krx/gZQ
6/QwAQD7oRzLm3Wg63EQIcbvhpZZlQvA7/FHVUVbIPE6+5ovWQEAsdHqyvyEXKMc
osLQJ5hAaYkfEgzjgy9kxR4f7tbdiwI=
=sbYX
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fix from Al Viro:
"do_dup2() out-of-bounds array speculation fix"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
protect the fetch of ->fd[fd] in do_dup2() from mispredictions
In tps68470_pmic_opregion_probe() pointer 'dev' is compared to NULL which
is useless.
Fix this issue by removing unneeded check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e13452ac37 ("ACPI / PMIC: Add TI PMIC TPS68470 operation region driver")
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://patch.msgid.link/20240730225339.13165-1-amishin@t-argos.ru
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This made the CPU bootup faster, otherwise Linux spends lots
of time to printing nonsense information for each CPU when
there are lots of CPUs.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Link: https://patch.msgid.link/20240719145330.9430-1-lirongqing@baidu.com
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 4d4547cf13cca820ff7e0f859ba83e1a610b9fd0
ACPI_ALLOCATE_ZEROED() may fail, elements might be NULL and will cause
NULL pointer dereference later.
Link: 4d4547cf
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://patch.msgid.link/tencent_4A21A2865B8B0A0D12CAEBEB84708EDDB505@qq.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that the ACPI sysfs attributes are organized around an
attribute_group, the device core can manage them.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240709-acpi-sysfs-groups-v2-4-058ab0667fa8@weissschuh.net
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The current manual attribute management is inconsistent and brittle.
Not all return values of device_create_file() are checked and the
cleanup logic needs to be kept up to date manually.
Moving all attributes into an attribute_group and using the is_visible()
callback allows the management of all attributes as a single unit.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240709-acpi-sysfs-groups-v2-3-058ab0667fa8@weissschuh.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The handling of the _STR method is inconsistent with the other method
evaluations. It is the only method which is cached.
The cached value stored in 'struct acpi_device_pnp' has a different
lifetime than the other struct members.
Commit d1efe3c324 ("ACPI: Add new sysfs interface to export device description")
does not explain this difference.
Evaluating the method every time also removes the necessity to manage
the lifetime of the cached value, which would be a problem when managing
the sysfs attributes through the device core.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240709-acpi-sysfs-groups-v2-2-058ab0667fa8@weissschuh.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Only buffer objects are valid return values of _STR.
If something else is returned description_show() will access invalid
memory.
Fixes: d1efe3c324 ("ACPI: Add new sysfs interface to export device description")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240709-acpi-sysfs-groups-v2-1-058ab0667fa8@weissschuh.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A local 'battery' variable is initialized to NULL on two occassions
where it is unconditionally rewritten later. Remove the unnecessary
initializations.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20240731095345.2878-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace strcpy() with strscpy() in the ACPI battery driver.
strcpy() has been deprecated because it is generally unsafe, so help to
eliminate if from the kernel source.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com>
Link: https://patch.msgid.link/20240706081104.14493-3-qasim.majeed20@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CONFIG_HOTPLUG_PARALLEL expects the architecture to implement
arch_cpuhp_init_parallel_bringup() to decide whether paralllel hotplug is
possible and to do the necessary architecture specific initialization.
There are architectures which can enable it unconditionally and do not
require architecture specific initialization.
Provide a weak fallback for arch_cpuhp_init_parallel_bringup() so that
such architectures are not forced to implement empty stub functions.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240716-loongarch-hotplug-v3-2-af59b3bb35c8@flygoat.com
It is not particularly useful to release locks (the EC mutex and the
ACPI global lock, if present) and re-acquire them immediately thereafter
during EC address space accesses in acpi_ec_space_handler().
First, releasing them for a while before grabbing them again does not
really help anyone because there may not be enough time for another
thread to acquire them.
Second, if another thread successfully acquires them and carries out
a new EC write or read in the middle if an operation region access in
progress, it may confuse the EC firmware, especially after the burst
mode has been enabled.
Finally, manipulating the locks after writing or reading every single
byte of data is overhead that it is better to avoid.
Accordingly, modify the code to carry out EC address space accesses
entirely without releasing the locks.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/12473338.O9o76ZdvQC@rjwysocki.net
Although the Arm architecture permits concurrent modification and
execution of NOP and branch instructions, it still requires some
synchronisation to ensure that other CPUs consistently execute the newly
written instruction:
> When the modified instructions are observable, each PE that is
> executing the modified instructions must execute an ISB or perform a
> context synchronizing event to ensure execution of the modified
> instructions
Prior to commit f6cc0c5016 ("arm64: Avoid calling stop_machine() when
patching jump labels"), the arm64 jump_label patching machinery
performed synchronisation using stop_machine() after each modification,
however this was problematic when flipping static keys from atomic
contexts (namely, the arm_arch_timer CPU hotplug startup notifier) and
so we switched to the _nosync() patching routines to avoid "scheduling
while atomic" BUG()s during boot.
In hindsight, the analysis of the issue in f6cc0c5016 isn't quite
right: it cites the use of IPIs in the default patching routines as the
cause of the lockup, whereas stop_machine() does not rely on IPIs and
the I-cache invalidation is performed using __flush_icache_range(),
which elides the call to kick_all_cpus_sync(). In fact, the blocking
wait for other CPUs is what triggers the BUG() and the problem remains
even after f6cc0c5016, for example because we could block on the
jump_label_mutex. Eventually, the arm_arch_timer driver was fixed to
avoid the static key entirely in commit a862fc2254
("clocksource/arm_arch_timer: Remove use of workaround static key").
This all leaves the jump_label patching code in a funny situation on
arm64 as we do not synchronise with other CPUs to reduce the likelihood
of a bug which no longer exists. Consequently, toggling a static key on
one CPU cannot be assumed to take effect on other CPUs, leading to
potential issues, for example with missing preempt notifiers.
Rather than revert f6cc0c5016 and go back to stop_machine() for each
patch site, implement arch_jump_label_transform_apply() and kick all
the other CPUs with an IPI at the end of patching.
Cc: Alexander Potapenko <glider@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Fixes: f6cc0c5016 ("arm64: Avoid calling stop_machine() when patching jump labels")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240731133601.3073-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As Documentation/filesystems/sysfs.rst suggested, show() should only use
sysfs_emit() or sysfs_emit_at() when formatting the value to be returned
to user space.
No functional change intended.
Signed-off-by: Xueqin Luo <luoxueqin@kylinos.cn>
Link: https://patch.msgid.link/20240801083156.2513508-3-luoxueqin@kylinos.cn
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As Documentation/filesystems/sysfs.rst suggested, show() should only
use sysfs_emit() or sysfs_emit_at() when formatting the value to be
returned to user space.
No functional change intended.
Signed-off-by: Xueqin Luo <luoxueqin@kylinos.cn>
Link: https://patch.msgid.link/20240801083156.2513508-2-luoxueqin@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When iommu_report_device_fault gets called with a partial fault it is
supposed to collect the fault into the group and then return.
Instead the return was accidently deleted which results in trying to
process the fault and an eventual crash.
Deleting the return was a typo, put it back.
Fixes: 3dfa64aecb ("iommu: Make iommu_report_device_fault() return void")
Signed-off-by: Barak Biber <bbiber@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/0-v1-e7153d9c8cee+1c6-iommu_fault_fix_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The current LATENCY_MULTIPLIER which has been around for nearly 20 years
causes rate_limit_us to be always in ms range.
On M1 mac mini I get 50 and 56us transition latency, but due to the 1000
multiplier we end up setting rate_limit_us to 50 and 56ms, which gets
capped into 2ms and was 10ms before e13aa799c2 ("cpufreq: Change
default transition delay to 2ms")
On Intel I5 system transition latency is 20us but due to the multiplier
we end up with 20ms that again is capped to 2ms.
Given how good modern hardware and how modern workloads require systems
to be more responsive to cater for sudden changes in workload (tasks
sleeping/wakeup/migrating, uclamp causing a sudden boost or cap) and
that 2ms is quarter of the time of 120Hz refresh rate system, drop the
old logic in favour of providing 50% headroom.
rate_limit_us = 1.5 * latency.
I considered not adding any headroom which could mean that we can end up
with infinite back-to-back requests.
I also considered providing a constant headroom (e.g: 100us) assuming
that any h/w or f/w dealing with the request shouldn't require a large
headroom when transition_latency is actually high.
But for both cases I wasn't sure if h/w or f/w can end up being
overwhelmed dealing with the freq requests in a potentially busy system.
So I opted for providing 50% breathing room.
This is expected to impact schedutil only as the other user,
dbs_governor, takes the max(2*tick, transition_delay_us) and the former
was at least 2ms on 1ms TICK, which is equivalent to the max_delay_us
before applying this patch. For systems with TICK of 4ms, this value
would have almost always ended up with 8ms sampling rate.
For systems that report 0 transition latency, we still default to
returning 1ms as transition delay.
This helps in eliminating a source of latency for applying requests as
mentioned in [1]. For example if we have a 1ms tick, most systems will
miss sending an update at tick when updating the util_avg for a task/CPU
(rate_limit_us will be 2ms for most systems).
Link: https://lore.kernel.org/lkml/20240724212255.mfr2ybiv2j2uqek7@airbuntu/ # [1]
Link: https://lore.kernel.org/lkml/20240205022500.2232124-1-qyousef@layalina.io/
Signed-off-by: Qais Yousef <qyousef@layalina.io>
Link: https://patch.msgid.link/20240728192659.58115-1-qyousef@layalina.io
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
AMD Family 1Ah's RAPL MSRs are identical to Family 19h's,
extend Family 19h's support to Family 1Ah.
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://patch.msgid.link/20240719101234.50827-1-Dhananjay.Ugwekar@amd.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The __NR_newfstat and __NR_newfstatat macros accidentally got renamed
in the conversion to the syscall.tbl format, dropping the 'new' portion
of the name.
In an unrelated change, the two syscalls are no longer architecture
specific but are once more defined on all 64-bit architectures, so the
'newstat' ABI keyword can be dropped from the table as a simplification.
Fixes: Fixes: 4fe53bf2ba ("syscalls: add generic scripts/syscall.tbl")
Closes: https://lore.kernel.org/lkml/838053e0-b186-4e9f-9668-9a3384a71f23@app.fastmail.com/T/#t
Reported-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Despite multiple attempts to get the syscall number assignment right
for the newly added uretprobe syscall, we ended up with a bit of a mess:
- The number is defined as 467 based on the assumption that the
xattrat family of syscalls would use 463 through 466, but those
did not make it into 6.11.
- The include/uapi/asm-generic/unistd.h file still lists the number
463, but the new scripts/syscall.tbl that was supposed to have the
same data lists 467 instead as the number for arc, arm64, csky,
hexagon, loongarch, nios2, openrisc and riscv. None of these
architectures actually provide a uretprobe syscall.
- All the other architectures (powerpc, arm, mips, ...) don't list
this syscall at all.
There are two ways to make it consistent again: either list it with
the same syscall number on all architectures, or only list it on x86
but not in scripts/syscall.tbl and asm-generic/unistd.h.
Based on the most recent discussion, it seems like we won't need it
anywhere else, so just remove the inconsistent assignment and instead
move the x86 number to the next available one in the architecture
specific range, which is 335.
Fixes: 5c28424e9a ("syscalls: Fix to add sys_uretprobe to syscall.tbl")
Fixes: 190fec72df ("uprobe: Wire up uretprobe system call")
Fixes: 63ded11097 ("uprobe: Change uretprobe syscall scope and number")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The free_device_compression_mode(iaa_device, device_mode) function frees
"device_mode" but it iss passed to iaa_compression_modes[i]->free() a few
lines later resulting in a use after free.
The good news is that, so far as I can tell, nothing implements the
->free() function and the use after free happens in dead code. But, with
this fix, when something does implement it, we'll be ready. :)
Fixes: b190447e0f ("crypto: iaa - Add compression mode management along with fixed mode")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit 1fffe7a34c ("script: modpost: emit a warning when the
description is missing"), a module without a MODULE_DESCRIPTION() will
result in a warning with make W=1. The following warning is being
observed when building ppc64le with CRYPTO_CURVE25519_PPC64=m:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/crypto/curve25519-ppc64le.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The QAT driver allows enabling SR-IOV VFs but does not allow them to be
disabled through a write to sysfs.
Disabling SR-IOV VFs can be only achieved by bringing down and up a
device using the attribute /sys/bus/pci/devices/<BDF>/qat/state.
The documentation for the sysfs attribute `sriov_numvfs` specifies
that "a userspace application wanting to disable the VFs would write a
zero to this file".
Add support for disabling SR-IOV VFs by writing '0' to the
'sriov_numvfs' attribute in sysfs.
Enabling or disabling SR-IOV always requires adf_dev_down() to be
called. This action subsequently leads to the deletion of the
ADF_KERNEL_SEC configuration section. The keys ADF_NUM_CY and ADF_NUM_DC
within that section must be set to '0', otherwise, the driver will
register into the Linux Crypto Framework. Because of this, the
configuration in the ADF_KERNEL_SEC section must be added before every
sriov_enable.
Signed-off-by: Michal Witwicki <michal.witwicki@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the process of sending the ADF_PF2VF_MSGTYPE_RESTARTING message to
Virtual Functions (VFs), the Physical Function (PF) should set the
`vf->restarting` flag to true before dispatching the message.
This change is necessary to prevent a race condition where the handling
of the ADF_VF2PF_MSGTYPE_RESTARTING_COMPLETE message (which sets the
`vf->restarting` flag to false) runs immediately after the message is sent,
but before the flag is set to true.
Set the `vf->restarting` to true before sending the message
ADF_PF2VF_MSGTYPE_RESTARTING, if supported by the version of the
protocol and if the VF is started.
Fixes: ec26f8e6c7 ("crypto: qat - update PFVF protocol for recovery")
Signed-off-by: Michal Witwicki <michal.witwicki@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the PFVF protocol was updated to support version 5, i.e.
ADF_PFVF_COMPAT_FALLBACK, the compatibility version for the VF was
updated without supporting the message RESTARTING_COMPLETE required for
such version.
Add support for the ADF_VF2PF_MSGTYPE_RESTARTING_COMPLETE message in the
VF drivers. This message is sent by the VF driver to the PF to notify
the completion of the shutdown flow.
Fixes: ec26f8e6c7 ("crypto: qat - update PFVF protocol for recovery")
Signed-off-by: Michal Witwicki <michal.witwicki@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Disabling IOV has the side effect of re-enabling the AEs that might
attempt to do DMAs into the heartbeat buffers.
Move the disable_iov() function in adf_dev_stop() before the AEs are
stopped.
Fixes: ed8ccaef52 ("crypto: qat - Add support for SRIOV")
Signed-off-by: Michal Witwicki <michal.witwicki@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ADF_GENERAL_SEC configuration section contains values that must be
preserved during state transitions (down -> up, up -> down).
This patch modifies the logic in adf_dev_shutdown() to maintain all
key values within this section, rather than selectively saving and
restoring only the ADF_SERVICES_ENABLED attribute.
To achieve this, a new function has been introduced that deletes all
configuration sections except for the one specified by name.
This function is invoked during adf_dev_down(), with ADF_GENERAL_SEC
as the argument. Consequently, the adf_dev_shutdown_cache_cfg() function
has been removed as it is now redundant.
Additionally, this patch eliminates the cache_config parameter from
the adf_dev_down() function since ADF_GENERAL_SEC should always be
retained. This change does not cause any side effects because all
entries in the key-value store are cleared when a module is unloaded.
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Co-developed-by: Michal Witwicki <michal.witwicki@intel.com>
Signed-off-by: Michal Witwicki <michal.witwicki@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When objtool gains support for ARM in the future, it may encounter issues
disassembling the following data in the .text section:
> .Lzeros:
> .long 0,0,0,0,0,0,0,0
> .asciz "Poly1305 for ARMv8, CRYPTOGAMS by \@dot-asm"
> .align 2
Move it to .rodata which is a more appropriate section for read-only data.
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These symbols are not used outside of the files, make them static to fix
sparse warnings:
sound/soc/fsl/lpc3xxx-i2s.c:261:30: warning: symbol 'lpc3xxx_i2s_dai_ops' was not declared. Should it be static?
sound/soc/fsl/lpc3xxx-i2s.c:271:27: warning: symbol 'lpc3xxx_i2s_dai_driver' was not declared. Should it be static?
sound/soc/fsl/lpc3xxx-pcm.c:55:39: warning: symbol 'lpc3xxx_soc_platform_driver' was not declared. Should it be static?
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://patch.msgid.link/20240802101044.3302251-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to constify `snd_soc_component_driver` struct, simplify the logic
and the `sti_sas_dev_data` struct.
Since commit 165a57a3df ("ASoC: sti-sas: clean legacy in sti-sas") only
only chip is supported and `sti_sas_driver` can be fully defined at
compilation time.
Before:
======
text data bss dec hex filename
8033 1547 16 9596 257c sound/soc/codecs/sti-sas.o
After:
=====
text data bss dec hex filename
8257 1163 16 9436 24dc sound/soc/codecs/sti-sas.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/2c08558813e3bbfae0a5302199cf6ca226e7cde1.1722544073.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Move tas2563_dvc_table into a separate Header file, as only tas2781
codec driver use this table, and hda side codec driver won't use it.
Fixes: 75ed63a5ab ("ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240802072055.1462-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Invert members to remove hole.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20240802124609.188954-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
