To prepare for the follow-up patch to use the code as an op, push out
the code that gets admin virtqueue base index and count to a separate
helper.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240716113552.80599-8-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is guaranteed by the virtio_pci and PCI layers that none of the VFs
is probed before setup_vq() is called for admin queue and after del_vq()
is called for admin queue. Therefore treat vp_dev->admin_vq.info.vq as
static, don't null it and don't take cmd lock during assign.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240716113552.80599-7-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If there is not enough vectors to satisfy all virtqueues, currently
the fallback is to use one vector for all virtqueues.
That may be unnecessary in some cases, when there is enough vectors per
data queues.
Introduce another fallback policy that tries to allocate vector for all
data queues, however for slow path queues (control/admin) it shares
config vector.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240716113552.80599-6-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of accessing vp_dev->per_vq_vectors, pass vector policy enum
as an argument of vp_find_one_vq_msix() in preparation for another irq
allocation policy.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240716113552.80599-5-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In preparation for another irq allocation fallback,
introduce vector policy enum and pass the values
to vp_find_vqs_msix() instead of bool arg.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240716113552.80599-4-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pass desc arg as it is always to vp_request_msix_vectors(). There rely
on per_vq_vectors arg and null desc in case it is false.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240716113552.80599-3-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In order to be reused for admin queue setup, push out common code to
setup and configure irq for one vq into a separate helper.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240716113552.80599-2-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/virtio/virtio_dma_buf.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Message-Id: <20240602-md-virtio_dma_buf-v1-1-ce602d47e257@quicinc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since the original virtio_find_vqs() is no longer present, rename
virtio_find_vqs_info() back to virtio_find_vqs().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-20-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All callers of virtio_find_vqs() and virtio_find_vqs_ctx() were
converted to use virtio_find_vqs_info(). Remove no longer used helpers.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-19-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), have one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-18-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), have one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-17-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), allocate one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-16-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), allocate one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-15-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of passing separate names and callbacks arrays
to virtio_find_vqs_ctx(), allocate one of virtual_queue_info structs
and pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-14-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), allocate one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-13-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), allocate one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-12-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), allocate one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-11-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since the original find_vqs() is no longer present, rename
find_vqs_info() back to find_vqs().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-10-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As it is no longer used, remove it.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-9-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since there are no more implementations of find_vqs() op, call
virtio_find_vqs_info() from virtio_find_single_vq() directly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-8-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convert existing find_vqs() transport implementations
to use find_vqs_info() config op.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-7-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a structure virtio_queue_info to carry name, callback and ctx
together. In order to allow config implementations to accept config op
with array of virtio_queue_info structures, introduce a new
find_vqs_info() op. Do the needed conversion in virtio_find_vqs_ctx().
Note that whole virtio_find_vqs_ctx() is going to be eventually removed
at the and of this patchset.
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-5-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In order to prepare for conversion of virtio_find_vqs*() arguments, make
virtio_find_single_vq() to call virtio_find_vqs() instead of
op directly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-4-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In order to prepare for conversion of virtio_find_vqs*() arguments, make
virtio_find_vqs() to call virtio_find_vqs_ctx() instead of op directly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-3-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since caif uses only one queue, convert to virtio_find_single_vq()
helper which is made for this purpose.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-2-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the UMP Endpoint is configured with static blocks, the block
configuration will never change, hence the unused ports will be
unchanged as well. Creating sequencer ports for those unused ports
is simply useless, and it might be rather confusing for users.
The idea behind the inactive ports was for allowing connections
from/to ports that can become usable later, but this will never
happen for inactive groups in static blocks.
Let's change the sequencer UMP binding to skip those unused ports when
the UMP EP is with static blocks.
Fixes: 81fd444aa3 ("ALSA: seq: Bind UMP device")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240717083322.25892-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When suspended, the DMA channel may enter PAUSE state if dmaengine_pause()
is supported by DMA.
At this state, dmaengine_synchronize() should not be called, otherwise
the DMA channel can't be resumed successfully.
Fixes: e8343410dd ("ALSA: dmaengine: Synchronize dma channel after drop()")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/1721198693-27636-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The dma_request_chan() returns error pointer in case of error, while
dma_request_channel() returns NULL in case of error therefore different
error checks are needed for the two.
Fixes: 7326d3fb1ee3 ("mtd: rawnand: lpx32xx: Request DMA channels using DT entries")
Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240705115139.126522-1-piotr.wojtaszczyk@timesys.com
MX35{U,L}F{2,4}G24AD-Z4I8 are Macronix serial NAND flashes.
Their main difference from MX35{U,L}F{2,4}G24AD lies in
the plane number. The plane number for those with the
postfix Z4I8 is 1.
These flashes have been validated on Xilinx zynq-picozed
board which include Macronix SPI Host.
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240704024839.241101-3-linchengming884@gmail.com
Adding the Device ID 2 on Macronix serial NAND flash.
When the number of flashes increases, we need to utilize
Device ID 2 to distinguish between different flashes.
These flashes have been validated on Xilinx zynq-picozed
board which included Macronix SPI Host.
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240704024839.241101-2-linchengming884@gmail.com
Convention is DT schemas should define all properties at the top-level
and not inside of if/then schemas. That minimizes the if/then schemas
and is more future proof.
There were 2 "if" schemas for "qcom,ipq806x-nand" and the
"qcom,boot-partitions: true" unnecessary, so the conditional schemas
can be simplified a bit.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240625215605.192260-1-robh@kernel.org
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Fix to the proper variable type 'unsigned long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240604212919.5038-6-wsa+renesas@sang-engineering.com
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240604212919.5038-5-wsa+renesas@sang-engineering.com
Add "fsl,imx8qxp-gpmi-nand" compatible string. iMX8QXP gpmi nand is similar
to iMX7D. But it is using 4 clocks: "gpmi_io", "gpmi_apb", "gpmi_bch" and
"gpmi_bch_apb".
Signed-off-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240520-gpmi_nand-v2-4-e3017e4c9da5@nxp.com
Introduce a boolean flag, 'support_edo_timing', within gpmi_devdata to
simplify the logic check in gpmi_setup_interface(). This is made in
preparation for adding support for imx8qxp gpmi.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240520-gpmi_nand-v2-3-e3017e4c9da5@nxp.com
Remove VID/PID 0bda:c82c as it was inadvertently added to the device
list in driver rtw8821cu. This VID/PID is for the rtw8822cu device
and it is already in the appropriate place for that device.
Cc: stable@vger.kernel.org
Signed-off-by: Nick Morrow <morrownr@gmail.com>
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/335d7fa1-0ba5-4b86-bba5-f98834ace1f8@gmail.com
The Realtek wifi 5 devices which support USB 3 are weird: when first
plugged in, they pretend to be USB 2. The driver needs to send some
commands to the device, which make it disappear and come back as a
USB 3 device.
Implement the required commands in rtw88.
When a USB 3 device is plugged into a USB 2 port, rtw88 will try to
switch it to USB 3 mode only once. The device will disappear and come
back still in USB 2 mode, of course.
Some people experience heavy interference in the 2.4 GHz band in
USB 3 mode, so add a module parameter switch_usb_mode with the
default value 1 to let people disable the switching.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/77906c62-5674-426f-bde1-1b2a12a0339d@gmail.com
efuse->ext_lna_2g is set twice and efuse->ext_lna_5g is not set at all.
Set each one once.
Nothing uses these members right now. They will be used by the RTL8821AU
and RTL8812AU drivers.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/8ccc9e13-0d45-417d-8f88-93a0ad294f77@gmail.com
patchsets (devmem among them) did not make it in time.
Core & protocols
----------------
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT.
- Use flex array for netdevice priv area, ensure its cache alignment.
- Add a sysctl knob to allow user to specify a default rto_min at socket
init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful.
- Support scheduling transmission of packets based on CLOCK_TAI.
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off
using cpusets.
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address.
- Allow configuration of multipath hash seed, to both allow synchronizing
hashing of two routers, and preventing partial accidental sync.
- Improve TCP compliance with RFC 9293 for simultaneous connect().
- Support sending NAT keepalives in IPsec ESP in UDP states. Userspace
IKE daemon had to do this before, but the kernel can better keep
track of it.
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled.
- Introduce IPPROTO_SMC for selecting SMC when socket is created.
- Allow UDP GSO transmit from devices with no checksum offload.
- openvswitch: add packet sampling via psample, separating the sampled
traffic from "upcall" packets sent to user space for forwarding.
- nf_tables: shrink memory consumption for transaction objects.
Things we sprinkled into general kernel code
--------------------------------------------
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver
for QCA6390).
- Add IRQ information in sysfs for auxiliary bus.
- Introduce guard definition for local_lock.
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures.
BPF
---
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered.
- Add new kfuncs for a generic, open-coded bits iterator.
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head.
- Support resilient split BTF which cuts down on duplication and makes
BTF as compact as possible WRT BTF from modules.
- Add support for dumping kfunc prototypes from BTF which enables both
detecting as well as dumping compilable prototypes for kfuncs.
- riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter.
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs.
Driver API
----------
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose.
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits.
- Track additional RSS contexts in the core, make sure configuration
changes don't break them.
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP
data paths.
- Support updating firmware on SFP modules.
Tests and tooling
-----------------
- mptcp: use net/lib.sh to manage netns.
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints.
- openvswitch: make test self-contained (don't depend on OvS CLI tools).
Drivers
-------
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead
and skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps
to catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead of
in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=opz8
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
This kselftest next update for Linux 6.11-rc1 consists of:
-- changes to resctrl test to cleanup resctrl_val() and
generalize it by removing test name specific handling
from the function.
-- several clang build failure fixes to framework and tests
-- adds tests to verify IFS (In Field Scan) driver functionality
-- cleanups to remove unused variables and document changes
-----BEGIN PGP SIGNATURE-----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=3vp1
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-next-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- change resctrl test to cleanup resctrl_val() and generalize it by
removing test name specific handling from the function.
- several clang build failure fixes to framework and tests
- add tests to verify IFS (In Field Scan) driver functionality
- cleanups to remove unused variables and document changes
* tag 'linux_kselftest-next-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (33 commits)
selftests: ifs: verify IFS ARRAY BIST functionality
selftests: ifs: verify IFS scan test functionality
selftests: ifs: verify test image loading functionality
selftests: ifs: verify test interfaces are created by the driver
selftests/dma:remove unused variable
selftests/breakpoints:Remove unused variable
selftests/x86: fix printk warnings reported by clang
selftests/x86: remove (or use) unused variables and functions
selftests/x86: avoid -no-pie warnings from clang during compilation
selftests/x86: build sysret_rip.c with clang
selftests/x86: build fsgsbase_restore.c with clang
selftests: x86: test_FISTTP: use fisttps instead of ambiguous fisttp
selftests/x86: fix Makefile dependencies to work with clang
selftests/timers: remove unused irqcount variable
selftests: Add information about TAP conformance in tests
selftests/resctrl: Remove test name comparing from write_bm_pid_to_resctrl()
selftests/resctrl: Remove mongrp from CMT test
selftests/resctrl: Remove mongrp from MBA test
selftests/resctrl: Convert ctrlgrp & mongrp to pointers
selftests/resctrl: Make some strings passed to resctrlfs functions const
...
This KUnit next update for Linux 6.11-rc1 consists of:
-- adds vm_mmap() allocation resource manager
-- converts usercopy kselftest to KUnit
-- disables usercopy testing on !CONFIG_MMU
-- adds MODULE_DESCRIPTION() to core, list, and usercopy tests
-- adds tests for assertion formatting functions - assert.c
-- introduces KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros
-- fixes KUNIT_ASSERT_STRNEQ comments to make it clear that it is
an assertion
-- renames KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT
-----BEGIN PGP SIGNATURE-----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=nnFR
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- add vm_mmap() allocation resource manager
- convert usercopy kselftest to KUnit
- disable usercopy testing on !CONFIG_MMU
- add MODULE_DESCRIPTION() to core, list, and usercopy tests
- add tests for assertion formatting functions - assert.c
- introduce KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros
- fix KUNIT_ASSERT_STRNEQ comments to make it clear that it is an
assertion
- rename KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT
* tag 'linux_kselftest-kunit-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Introduce KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros
kunit: Rename KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT for readability
kunit: Fix the comment of KUNIT_ASSERT_STRNEQ as assertion
kunit: executor: Simplify string allocation handling
kunit/usercopy: Add missing MODULE_DESCRIPTION()
kunit/usercopy: Disable testing on !CONFIG_MMU
usercopy: Convert test_user_copy to KUnit test
kunit: test: Add vm_mmap() allocation resource manager
list: test: add the missing MODULE_DESCRIPTION() macro
kunit: add missing MODULE_DESCRIPTION() macros to core modules
list: test: remove unused struct 'klist_test_struct'
kunit: Cover 'assert.c' with tests
UML should not be using the architecture native runtime constants, since
that requires also having the appropriate instruction fixups (and all
the linker script details).
Not that using that code would be impossible, but it's not worth it.
Just point UML at the generic version.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: e3c92e8171 ("runtime constants: add x86 architecture support")
Link: https://lore.kernel.org/all/20240716143644.GA1827132@thelio-3990X/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Intel PT support enhancements & fixes
- Fix leaked SIGTRAP events
- Improve and fix the Intel uncore driver
- Add support for Intel HBM and CXL uncore counters
- Add Intel Lake and Arrow Lake support
- AMD uncore driver fixes
- Make SIGTRAP and __perf_pending_irq() work on RT
- Micro-optimizations
- Misc cleanups and fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=gguT
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
- Intel PT support enhancements & fixes
- Fix leaked SIGTRAP events
- Improve and fix the Intel uncore driver
- Add support for Intel HBM and CXL uncore counters
- Add Intel Lake and Arrow Lake support
- AMD uncore driver fixes
- Make SIGTRAP and __perf_pending_irq() work on RT
- Micro-optimizations
- Misc cleanups and fixes
* tag 'perf-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
perf/x86/intel: Add a distinct name for Granite Rapids
perf/x86/intel/ds: Fix non 0 retire latency on Raptorlake
perf/x86/intel: Hide Topdown metrics events if the feature is not enumerated
perf/x86/intel/uncore: Fix the bits of the CHA extended umask for SPR
perf: Split __perf_pending_irq() out of perf_pending_irq()
perf: Don't disable preemption in perf_pending_task().
perf: Move swevent_htable::recursion into task_struct.
perf: Shrink the size of the recursion counter.
perf: Enqueue SIGTRAP always via task_work.
task_work: Add TWA_NMI_CURRENT as an additional notify mode.
perf: Move irq_work_queue() where the event is prepared.
perf: Fix event leak upon exec and file release
perf: Fix event leak upon exit
task_work: Introduce task_work_cancel() again
task_work: s/task_work_cancel()/task_work_cancel_func()/
perf/x86/amd/uncore: Fix DF and UMC domain identification
perf/x86/amd/uncore: Avoid PMU registration if counters are unavailable
perf/x86/intel: Support Perfmon MSRs aliasing
perf/x86/intel: Support PERFEVTSEL extension
perf/x86: Add config_mask to represent EVENTSEL bitmask
...
