io_uring_cmd_iopoll_done()'s only caller was removed in commit
9ce6c9875f ("nvme: always punt polled uring_cmd end_io work to
task_work"). So remove the unused function too.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250902013328.1517686-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring_cmd_done() takes the result code for the CQE as a ssize_t ret
argument. However, the CQE res field is a s32 value, as is the argument
to io_req_set_res(). To clarify that only s32 values can be faithfully
represented without truncation, change io_uring_cmd_done()'s ret
argument type to s32.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250902012609.1513123-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-09-02 (ice, idpf, i40e, ixgbe, e1000e)
For ice:
Jake adds checks for initialization of Tx timestamp tracking structure
to prevent NULL pointer dereferences.
For idpf:
Josh moves freeing of auxiliary device id to prevent use-after-free issue.
Emil sets, expected, MAC type value when sending virtchnl add/delete MAC
commands.
For i40e:
Jake removes read debugfs access as 'netdev_ops' has the possibility to
overflow.
Zhen Ni adds handling for when MAC list is empty.
For ixgbe:
Alok Tiwari corrects bitmap being used for link speeds.
For e1000e:
Vitaly adds check to ensure overflow does not occur in
e1000_set_eeprom().
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: fix heap overflow in e1000_set_eeprom
ixgbe: fix incorrect map used in eee linkmode
i40e: Fix potential invalid access when MAC list is empty
i40e: remove read access to debugfs files
idpf: set mac type when adding and removing MAC filters
idpf: fix UAF in RDMA core aux dev deinitialization
ice: fix NULL access of tx->in_use in ice_ll_ts_intr
ice: fix NULL access of tx->in_use in ice_ptp_ts_irq
====================
Link: https://patch.msgid.link/20250902232131.2739555-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On a vast majority of Qualcomm chipsets DisplayPort controller can
support several MST streams (up to 4x). To support MST these chipsets
use up to 4 stream pixel clocks for the DisplayPort controller and
several extra register regions. Expand corresponding region and clock
bindings for these platforms and fix example schema files to follow
updated bindings.
Note: On chipsets that support MST, the number of streams supported
can vary between controllers. For example, SA8775P supports 4 MST
streams on mdss_dp0 but only 2 streams on mdss_dp1.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/672585/
Link: https://lore.kernel.org/r/20250903-dp_mst_bindings-v8-7-7526f0311eaa@oss.qualcomm.com
DP controller schema documents assigned-clocks and
assigned-clock-parents. However these assignments should not be a part
of the ABI: there are no actual requirements on the order of the
assignments, MST cases require different number of clocks to be
assigned, etc.
Instead of fixing up the documentation, drop the assigned-clock-parents
and assigned-clocks from the bindings. The generic clock/clock.yaml
already covers these properties.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/672586/
Link: https://lore.kernel.org/r/20250903-dp_mst_bindings-v8-6-7526f0311eaa@oss.qualcomm.com
Fix c&p error and correct example to use 32-bit addressing (as the rest
of the example DT does) instead of 64-bit (as the platform does). It
got unnoticed before since DP controller node wasn't validated against
DT schema because of the missing compatible.
Fixes: 81de267367 ("dt-bindings: display/msm: Document MDSS on X1E80100")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/672574/
Link: https://lore.kernel.org/r/20250903-dp_mst_bindings-v8-4-7526f0311eaa@oss.qualcomm.com
Currently SM6350 uses qcom,sm8350-dp as a fallback compatible entry.
This works, but adding DP MST support will reveal that this SoC is
not fully compatible with SM8350 platform: the former one doesn't
provide MST support, while the latter one will get it. DT schema for
SM8350 is going to demand MST-related clocks which SM6350 doesn't
provide.
Add new entry for SM6350 with fallback to SC7180 (which belongs to the
same generation and also doesn't have MST support). SC7180 has been
supported by the Linux kernel long ago (and long before SM8350 support
was added).
Fixes: 3908615159 ("dt-bindings: display: msm: dp-controller: document SM6350 compatible")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/672571/
Link: https://lore.kernel.org/r/20250903-dp_mst_bindings-v8-2-7526f0311eaa@oss.qualcomm.com
Add support for Global clock controller for Glymur SoC which would
enable the consumers to enable/disable the required clocks.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250825-glymur-clock-controller-v5-v5-7-01b8c8681bcd@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add clock operations and register offsets to enable control of the Taycan
EKO_T PLL, allowing for proper configuration and management of the PLL.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250825-glymur-clock-controller-v5-v5-5-01b8c8681bcd@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a clock driver for the TCSR clock controller found on Glymur SoC,
which provides refclks for PCIE, USB, and UFS subsystems.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250825-glymur-clock-controller-v5-v5-3-01b8c8681bcd@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Glymur SoC TCSR block provides CLKREF clocks for EDP, PCIe and USB.
Add this to the TCSR clock controller binding together with identifiers
for the clocks.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250825-glymur-clock-controller-v5-v5-2-01b8c8681bcd@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Followup of commit c51da3f7a1 ("net: remove sock_i_uid()")
A recent syzbot report was the trigger for this change.
Over the years, we had many problems caused by the
read_lock[_bh](&sk->sk_callback_lock) in sock_i_uid().
We could fix smc_diag_dump_proto() or make a more radical move:
Instead of waiting for new syzbot reports, cache the socket
inode number in sk->sk_ino, so that we no longer
need to acquire sk->sk_callback_lock in sock_i_ino().
This makes socket dumps faster (one less cache line miss,
and two atomic ops avoided).
Prior art:
commit 25a9c8a443 ("netlink: Add __sock_i_ino() for __netlink_diag_dump().")
commit 4f9bf2a2f5 ("tcp: Don't acquire inet_listen_hashbucket::lock with disabled BH.")
commit efc3dbc374 ("rds: Make rds_sock_lock BH rather than IRQ safe.")
Fixes: d2d6422f8b ("x86: Allow to enable PREEMPT_RT.")
Reported-by: syzbot+50603c05bbdf4dfdaffa@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68b73804.050a0220.3db4df.01d8.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250902183603.740428-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=wamJ
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-09-02' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter: updates for net-next
1) prefer vmalloc_array in ebtables, from Qianfeng Rong.
2) Use csum_replace4 instead of open-coding it, from Christophe Leroy.
3+4) Get rid of GFP_ATOMIC in transaction object allocations, those
cause silly failures with large sets under memory pressure, from
myself.
5) Remove test for AVX cpu feature in nftables pipapo set type,
testing for AVX2 feature is sufficient.
6) Unexport a few function in nf_reject infra: no external callers.
7) Extend payload offset to u16, this was restricted to values <=255
so far, from Fernando Fernandez Mancera.
* tag 'nf-next-25-09-02' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nft_payload: extend offset to 65535 bytes
netfilter: nf_reject: remove unneeded exports
netfilter: nft_set_pipapo: remove redundant test for avx feature bit
netfilter: nf_tables: all transaction allocations can now sleep
netfilter: nf_tables: allow iter callbacks to sleep
netfilter: nft_payload: Use csum_replace4() instead of opencoding
netfilter: ebtables: Use vmalloc_array() to improve code
====================
Link: https://patch.msgid.link/20250902133549.15945-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simplifies error handling by replacing the manual check
of the return value with the `to_result` helper.
Signed-off-by: Onur Özkan <work@onurozkan.dev>
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Link: https://patch.msgid.link/20250821091235.800-1-work@onurozkan.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the SMBus Quick operation from this driver because it is not
natively supported by the hardware and is wrongly implemented in the
driver.
The I2C controllers in Realtek RTL9300 and RTL9310 are SMBus-compliant
but there doesn't seem to be native support for the SMBus Quick
operation. It is not explicitly mentioned in the documentation but
looking at the registers which configure an SMBus transaction, one can
see that the data length cannot be set to 0. This suggests that the
hardware doesn't allow any SMBus message without data bytes (except for
those it does on it's own, see SMBus Block Read).
The current implementation of SMBus Quick operation passes a length of
0 (which is actually invalid). Before the fix of a bug in a previous
commit, this led to a read operation of 16 bytes from any register (the
one of a former transaction or any other value.
This caused issues like soft-bricked SFP modules after a simple probe
with i2cdetect which uses Quick by default. Running this with SFP
modules whose EEPROM isn't write-protected, some of the initial bytes
are overwritten because a 16-byte write operation is executed instead of
a Quick Write. (This temporarily soft-bricked one of my DAC cables.)
Because SMBus Quick operation is obviously not supported on these
controllers (because a length of 0 cannot be set, even when no register
address is set), remove that instead of claiming there is support. There
also shouldn't be any kind of emulated 'Quick' which just does another
kind of operation in the background. Otherwise, specific issues occur
in case of a 'Quick' Write which actually writes unknown data to an
unknown register.
Fixes: c366be7202 ("i2c: Add driver for the RTL9300 I2C controller")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250831100457.3114-4-jelonek.jonas@gmail.com
Add an explicit check for the xfer length to 'rtl9300_i2c_config_xfer'
to ensure the data length isn't within the supported range. In
particular a data length of 0 is not supported by the hardware and
causes unintended or destructive behaviour.
This limitation becomes obvious when looking at the register
documentation [1]. 4 bits are reserved for DATA_WIDTH and the value
of these 4 bits is used as N + 1, allowing a data length range of
1 <= len <= 16.
Affected by this is the SMBus Quick Operation which works with a data
length of 0. Passing 0 as the length causes an underflow of the value
due to:
(len - 1) & 0xf
and effectively specifying a transfer length of 16 via the registers.
This causes a 16-byte write operation instead of a Quick Write. For
example, on SFP modules without write-protected EEPROM this soft-bricks
them by overwriting some initial bytes.
For completeness, also add a quirk for the zero length.
[1] https://svanheule.net/realtek/longan/register/i2c_mst1_ctrl2
Fixes: c366be7202 ("i2c: Add driver for the RTL9300 I2C controller")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250831100457.3114-3-jelonek.jonas@gmail.com
Fix the current check for number of channels (child nodes in the device
tree). Before, this was:
if (device_get_child_node_count(dev) >= RTL9300_I2C_MUX_NCHAN)
RTL9300_I2C_MUX_NCHAN gives the maximum number of channels so checking
with '>=' isn't correct because it doesn't allow the last channel
number. Thus, fix it to:
if (device_get_child_node_count(dev) > RTL9300_I2C_MUX_NCHAN)
Issue occured on a TP-Link TL-ST1008F v2.0 device (8 SFP+ ports) and fix
is tested there.
Fixes: c366be7202 ("i2c: Add driver for the RTL9300 I2C controller")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250831100457.3114-2-jelonek.jonas@gmail.com
Renesas RZN1 GMAC uses three interrupts in in-kernel DTS and common
snps,dwmac.yaml binding is flexible, so define precise constraint for
this device.
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250902154051.263156-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
STMMAC on SoCFPGA uses exactly one interrupt in in-kernel DTS and common
snps,dwmac.yaml binding is flexible, so define precise constraint for
this device.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Matthew Gerlach <matthew.gerlach@altera.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250902154051.263156-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The blamed commit introduced the concept of split attribute
counting, and later allocating an array to hold them, however
TypeArrayNest wasn't updated to use the new counting variable.
Abbreviated example from tools/net/ynl/generated/nl80211-user.c:
nl80211_if_combination_attributes_parse(...):
unsigned int n_limits = 0;
[...]
ynl_attr_for_each(attr, nlh, yarg->ys->family->hdr_len)
if (type == NL80211_IFACE_COMB_LIMITS)
ynl_attr_for_each_nested(attr2, attr)
dst->_count.limits++;
if (n_limits) {
dst->_count.limits = n_limits;
/* allocate and parse attributes */
}
In the above example n_limits is guaranteed to always be 0,
hence the conditional is unsatisfiable and is optimized out.
This patch changes the attribute counting to use n_limits++ in the
attribute counting loop in the above example.
Fixes: 58da455b31 ("tools: ynl-gen: improve unwind on parsing errors")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20250902160001.760953-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In this context "not that ..." should properly be "note that ...".
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250902154640.759815-4-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch changes the generated min-len check for binary
attributes to use the NLA_POLICY_MIN_LEN() macro, thereby the
generated code supports strict policy validation.
With this change TypeBinary will always generate a NLA_BINARY
attribute policy.
This doesn't change any currently generated code, as it isn't
used in any specs currently used for generating code.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250902154640.759815-3-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While updating the binary min-len implementation, I noticed that
the only user, should AFAICT be using exact-len instead.
In net/ipv4/fou_core.c FOU_ATTR_LOCAL_V6 and FOU_ATTR_PEER_V6
are only used for singular IPv6 addresses, and there are AFAICT
no known implementations trying to send more, it therefore
appears safe to change it to an exact-len policy.
This patch therefore changes the local-v6/peer-v6 attributes to
use an exact-len check, instead of a min-len check.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250902154640.759815-2-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add driver for Display clock controller (DISPCC) on Qualcomm Glymur SoC.
This would enable the display sw driver to enable/disable/request for
the display clocks.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250829-glymur-disp-clock-controllers-v1-2-0ce6fabd837c@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the device tree bindings for the display clock controller which are
required on Qualcomm Glymur SoC.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250829-glymur-disp-clock-controllers-v1-1-0ce6fabd837c@oss.qualcomm.com
[bjorn: Dropped unnecessary include in DT example]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Accelerated Receive Flow Steering (aRFS) relies on sockets recording
their RX flow hash into the rps_sock_flow_table so that incoming packets
are steered to the CPU where the application runs.
With MPTCP, the application interacts with the parent MPTCP socket while
data is carried over per-subflow TCP sockets. Without recording these
subflows, aRFS cannot steer interrupts and RX processing for the flows
to the desired CPU.
Record all subflows in the RPS table by calling sock_rps_record_flow()
for each subflow at the start of mptcp_sendmsg(), mptcp_recvmsg() and
mptcp_stream_accept(), by using the new helper
mptcp_rps_record_subflows().
It does not by itself improve throughput, but ensures that IRQ and RX
processing are directed to the right CPU, which is a
prerequisite for effective aRFS.
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250902-net-next-mptcp-misc-feat-6-18-v2-4-fa02bb3188b1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a helper to check if RFS is needed or not. Allows to make the code a
bit cleaner and the next patch to have MPTCP use this helper to decide
whether or not to iterate over the subflows.
tun_flow_update() was calling sock_rps_record_flow_hash() regardless of
the state of rfs_needed. This was not really a bug as sock_flow_table
simply ends up being NULL and thus everything will be fine.
This commit here thus also implicitly makes tun_flow_update() respect
the state of rfs_needed.
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250902-net-next-mptcp-misc-feat-6-18-v2-3-fa02bb3188b1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that there are easy-to-use HMAC-SHA256 library functions, use these
in net/mptcp/crypto.c instead of open-coding the HMAC algorithm.
Remove the WARN_ON_ONCE() for messages longer than SHA256_DIGEST_SIZE.
The new implementation handles all message lengths correctly.
The mptcp-crypto KUnit test still passes after this change.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250902-net-next-mptcp-misc-feat-6-18-v2-1-fa02bb3188b1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most of the information in the first paragraph of the
Introduction/Credits section is outdated.
Documentation update suggestions should go to documentation maintainers
listed in MAINTAINERS. Remove misleading contact information.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/cb4987a16ed96ee86841aec921d914bd44249d0b.1756294647.git.baruch@tkos.co.il
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmi33gsACgkQSD+KveBX
+j6ocwf+M3BJG7clbsyBQKO6ZZFRhGSMcROigNW/B/ce3LnywT5BPZe8ruih11Bm
eV/J1KPm3vMuFS+0g5E9ojAIf0B613W8Faq25KsgQp7UQGa3lI5V94AGqLkvVDP9
aXw4uJCOC7mkofrEW0BYRT1WmBru+p7W14+op7Yy3nXEynprSSwL0eek/3JW+i8I
VpAvxovDxMQQSUGfQ+oXoCRt5uDGPskO4Et5rS8rQkwVaFEEJ2SnndEFe5gx6EIo
8mhe08y4ZvhSPMx1K6KasN/r/p2oDdAjph/SLiqZ5Y4mObSvVvqSkwn83DFM/KQU
iwgUOUdbbecsDkCL5ahM/P/bOTvSoQ==
=vTPC
-----END PGP SIGNATURE-----
Merge tag 'mlx5-psp-ifc' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
mlx5 PSP IFC bits
This PR has a single patch to add mlx5_ifc PSP related capabilities structures
and HW definitions needed for PSP support in mlx5.
Link: https://lore.kernel.org/20250828162953.2707727-1-daniel.zahka@gmail.com
* tag 'mlx5-psp-ifc' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add PSP capabilities structures and bits
====================
Link: https://patch.msgid.link/20250903063050.668442-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- a set of buffer overflow fixes
- ath11k: a fix for GTK rekeying
- ath12k: a missed WiFi7 capability
-----BEGIN PGP SIGNATURE-----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=XgPl
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-09-03' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just a few updates:
- a set of buffer overflow fixes
- ath11k: a fix for GTK rekeying
- ath12k: a missed WiFi7 capability
* tag 'wireless-2025-09-03' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: wilc1000: avoid buffer overflow in WID string configuration
wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result()
wifi: libertas: cap SSID len in lbs_associate()
wifi: cw1200: cap SSID length in cw1200_do_join()
wifi: ath11k: fix group data packet drops during rekey
wifi: ath12k: Set EMLSR support flag in MLO flags for EML-capable stations
====================
Link: https://patch.msgid.link/20250903075602.30263-4-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
scx_bpf_cpu_rq() works on an unlocked rq which generally isn't safe.
For the common use-cases scx_bpf_locked_rq() and
scx_bpf_cpu_curr() work, so add a deprecation warning
to scx_bpf_cpu_rq() so it can eventually be removed.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Use Jinja2 comments instead of HTML comments for the SPDX and copyright
lines. This prevents them from appearing in the HTML output, which was
never the intention; the HTML output has its own copyright line at the
bottom of the document.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250830170808.3911151-1-vegard.nossum@oracle.com
Provide scx_bpf_cpu_curr() as a way for scx schedulers to check the curr
task of a remote rq without assuming its lock is held.
Many scx schedulers make use of scx_bpf_cpu_rq() to check a remote curr
(e.g. to see if it should be preempted). This is problematic because
scx_bpf_cpu_rq() provides access to all fields of struct rq, most of
which aren't safe to use without holding the associated rq lock.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Most fields in scx_bpf_cpu_rq() assume that its rq_lock is held.
Furthermore they become meaningless without rq lock, too.
Make a safer version of scx_bpf_cpu_rq() that only returns a rq
if we hold rq lock of that rq.
Also mark the new scx_bpf_locked_rq() as returning NULL as
scx_bpf_cpu_rq() should've been too.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
These are mainly devicetree fixes for the rockchip and nxp platforms on
arm64, addressing mistakes in the board and soc specific descriptions.
In particular the newly added Rock 5T board required multiple bugfixes for
PCIe and USB, while on the i.MX platform there are a number of regulator
related fixes. The only other platforms with devicetree fixes are at91
with a fixup for SD/MMC and a change to enable all the available UARTS
on the Axiado reference board.
Also on the at91 platform, a Kconfig change addresses a regression that
stopped the DMA engine from working in 6.17-rc.
Three drivers each have a simple bugfix, stopping incorrect behavior in
op-tee firmware, the tee subsystem and the qualcomm mdt_loader.
Two trivial MAINTAINERS file changes are needed to make sure that
patches reach the correct maintainer, but don't change the actual
responsibilities.
-----BEGIN PGP SIGNATURE-----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=OIgX
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These are mainly devicetree fixes for the rockchip and nxp platforms
on arm64, addressing mistakes in the board and soc specific
descriptions.
In particular the newly added Rock 5T board required multiple bugfixes
for PCIe and USB, while on the i.MX platform there are a number of
regulator related fixes. The only other platforms with devicetree
fixes are at91 with a fixup for SD/MMC and a change to enable all the
available UARTS on the Axiado reference board.
Also on the at91 platform, a Kconfig change addresses a regression
that stopped the DMA engine from working in 6.17-rc.
Three drivers each have a simple bugfix, stopping incorrect behavior
in op-tee firmware, the tee subsystem and the qualcomm mdt_loader.
Two trivial MAINTAINERS file changes are needed to make sure that
patches reach the correct maintainer, but don't change the actual
responsibilities"
* tag 'soc-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
ARM: dts: microchip: sama7d65: Force SDMMC Legacy mode
ARM: at91: select ARCH_MICROCHIP
arm64: dts: rockchip: fix second M.2 slot on ROCK 5T
arm64: dts: rockchip: fix USB on RADXA ROCK 5T
MAINTAINERS: exclude defconfig from ARM64 PORT
arm64: dts: axiado: Add missing UART aliases
MAINTAINERS: Update Nobuhiro Iwamatsu's email address
arm64: dts: rockchip: Add vcc-supply to SPI flash on Pinephone Pro
arm64: dts: rockchip: fix es8388 address on rk3588s-roc-pc
arm64: dts: rockchip: Fix Bluetooth interrupts flag on Neardi LBA3368
arm64: dts: rockchip: correct network description on Sige5
arm64: dts: rockchip: Minor whitespace cleanup
ARM: dts: rockchip: Minor whitespace cleanup
arm64: dts: rockchip: Add supplies for eMMC on rk3588-orangepi-5
arm64: dts: rockchip: Fix the headphone detection on the orangepi 5 plus
arm64: dts: imx95: Fix JPEG encoder node assigned clock
arm64: dts: imx95-19x19-evk: correct the phy setting for flexcan1/2
arm64: dts: imx8mp: Fix missing microSD slot vqmmc on Data Modul i.MX8M Plus eDM SBC
arm64: dts: imx8mp: Fix missing microSD slot vqmmc on DH electronics i.MX8M Plus DHCOM
arm64: dts: imx8mp-tqma8mpql: remove virtual 3.3V regulator
...
SCX hooks into CPU cgroup controller operations and read-locks
scx_cgroup_rwsem to exclude them while enabling and disable schedulers.
While this works, it's unnecessarily complicated given that
cgroup_[un]lock() are available and thus the cgroup operations can be locked
out that way.
Drop scx_cgroup_rwsem locking from the tg on/offline and cgroup [can_]attach
operations. Instead, grab cgroup_lock() from scx_cgroup_lock(). Drop
scx_cgroup_finish_attach() which is no longer necessary. Drop the now
unnecessary rcu locking and css ref bumping in scx_cgroup_init() and
scx_cgroup_exit().
As scx_cgroup_set_weight/bandwidth() paths aren't protected by
cgroup_lock(), rename scx_cgroup_rwsem to scx_cgroup_ops_rwsem and retain
the locking there.
This is overall simpler and will also allow enable/disable paths to
synchronize against cgroup changes independent of the CPU controller.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
