__irq_domain_add() wrappers use directly __irq_domain_add(). With the
introduction of irq_domain_instantiate(), __irq_domain_add() becomes
obsolete.
In order to fully remove __irq_domain_add(), convert wrappers to
irq_domain_instantiate()
[ tglx: Fixup struct initializers ]
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-18-herve.codina@bootlin.com
The current API functions create an irq_domain and also publish this
newly created to domain. Once an irq_domain is published, consumers can
request IRQ in order to use them.
Some interrupt controller drivers have to perform some more operations
with the created irq_domain in order to have it ready to be used.
For instance:
- Allocate generic irq chips with irq_alloc_domain_generic_chips()
- Retrieve the generic irq chips with irq_get_domain_generic_chip()
- Initialize retrieved chips: set register base address and offsets,
set several hooks such as irq_mask, irq_unmask, ...
With the newly introduced irq_domain_alloc_generic_chips(), an interrupt
controller driver can use the irq_domain_chip_generic_info structure and
set the init() hook to perform its generic chips initialization.
In order to avoid a window where the domain is published but not yet
ready to be used, handle the generic chip creation (i.e the
irq_domain_alloc_generic_chips() call) before the domain is published.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-16-herve.codina@bootlin.com
Most of generic chip drivers need to perform some more additional
initializations on the generic chips allocated before they can be fully
ready.
These additional initializations need to be performed before the IRQ
domain is published to avoid a race condition between IRQ consumers and
suppliers.
Introduce the init() hook to perform these initializations at the right
place just after the generic chip creation. Also introduce the exit() hook
to allow reverting operations done by the init() hook just before the
generic chip is destroyed.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-15-herve.codina@bootlin.com
The existing __irq_alloc_domain_generic_chips() uses a bunch of parameters
to describe the generic chips that need to be allocated.
Adding more parameters and wrappers to hide new parameters in the existing
code leads to more and more code without any relevant values and without
any flexibility.
Introduce irq_domain_alloc_generic_chips() where the generic chips
description is done using the irq_domain_chip_generic_info structure
instead of the bunch of parameters to allow flexibility and easy evolution.
Also introduce irq_domain_remove_generic_chips() to revert the operations
done by irq_domain_alloc_generic_chips().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-14-herve.codina@bootlin.com
The current API does not allow additional initialization before the
domain is published. This can lead to a race condition between consumers
and supplier as a domain can be available for consumers before being
fully ready.
Introduce the init() hook to allow additional initialization before
plublishing the domain. Also introduce the exit() hook to revert
operations done in init() on domain removal.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-13-herve.codina@bootlin.com
irq_domain_update_bus_token() is the only way to set the domain bus
token. This is sub-optimal as irq_domain_update_bus_token() can be called
only once the domain is created and needs to revert some operations, change
the domain name and redo the operations.
In order to avoid this revert/change/redo sequence, take the domain bus
into account token during the domain creation.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-12-herve.codina@bootlin.com
__irq_domain_create() can fail for several reasons. When it fails it
returns a NULL pointer and so filters out the exact failure reason.
The only user of __irq_domain_create() is irq_domain_instantiate() which
can return a PTR_ERR value. On __irq_domain_create() failure, it uses an
arbitrary error code.
Rather than using this arbitrary error value, make __irq_domain_create()
return is own error code and use that one.
[ tglx: Remove the pointless ERR_CAST. domain is a valid return pointer ]
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-11-herve.codina@bootlin.com
irq_domain_instantiate() handles all needs to be used in
irq_domain_create_hierarchy()
Avoid code duplication and use directly irq_domain_instantiate() for
hierarchy domain creation.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-10-herve.codina@bootlin.com
To use irq_domain_instantiate() from irq_domain_create_hierarchy(),
irq_domain_instantiate() needs to handle the domain hierarchy parent.
Add the required functionality.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-9-herve.codina@bootlin.com
In order to use irq_domain_instantiate() from several places such as
irq_domain_create_hierarchy(), irq_domain_instantiate() needs to handle
additional domain flags.
Add the required infrastructure.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-8-herve.codina@bootlin.com
The existing __irq_domain_create() use a bunch of parameters to create
an irq domain.
With the introduction of irq_domain_info structure, these parameters are
available in the information structure itself.
Using directly this information structure allows future flexibility to
add other parameters in a simple way without the need to change the
__irq_domain_create() prototype.
Convert __irq_domain_create() to use the information structure.
[ tglx: Fixup struct initializer ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-7-herve.codina@bootlin.com
The interrupt domain name computation and setting is directly done in
__irq_domain_create(). This leads to a quite long __irq_domain_create()
function.
In order to simplify __irq_domain_create() and isolate the domain name
computation and setting, move the related operations to a dedicated
function.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-6-herve.codina@bootlin.com
The fwnode parameter has no reason to be a pointer to an un-const struct
fwnode_handle. Indeed, struct fwnode_handle is not supposed to be modified
by the function.
Be consistent with other function performing the same kind of operation
such as is_of_node(), is_acpi_device_node() or is_software_node(): constify
the fwnode parameter.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-5-herve.codina@bootlin.com
The existing irq_domain_add_*() functions used to instantiate an IRQ
domain are wrappers built on top of __irq_domain_add() and describe the
domain properties using a bunch of parameters.
Adding more parameters and wrappers to hide new parameters in the
existing code lead to more and more code without any relevant value and
without any flexibility.
Introduce irq_domain_instantiate() where the interrupt domain properties
are given using a irq_domain_info structure instead of the bunch of
parameters to allow flexibility and easy evolution.
irq_domain_instantiate() performs the same operation as the one done by
__irq_domain_add(). For compatibility reason with existing code, keep
__irq_domain_add() but convert it to irq_domain_instantiate().
[ tglx: Fixed up struct initializer coding style ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-3-herve.codina@bootlin.com
In preparation of the introduction of the irq domain instantiation,
introduce irq_domain_free() to avoid code duplication on later
modifications.
This new function is an extraction of the current operations performed
to free the irq domain. No functional change intended.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-2-herve.codina@bootlin.com
fwnode_handle_get(fwnode) is called when a domain is created with fwnode
passed as a function parameter. fwnode_handle_put(domain->fwnode) is called
when the domain is destroyed but during the creation a path exists that
does not set domain->fwnode.
If this path is taken, the fwnode get will never be put.
To avoid the unbalanced get and put, set domain->fwnode unconditionally.
Fixes: d59f6617ee ("genirq: Allow fwnode to carry name information only")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240614173232.1184015-4-herve.codina@bootlin.com
PECI clock divider is programmed on 10:8 bits of PECI Control register.
Before setting a new value, clear bits read from hardware.
Reviewed-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20240417134849.5793-1-iwona.winiarska@intel.com
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Whenever CPU hotplug state callbacks are registered, the startup callback
is invoked on CPUs that have already reached the provided state in order of
ascending CPU IDs.
In freeze_secondary_cpus() the teardown of CPUs happens in the same are
invoked in the same order. This is known to make a difference is the
current implementation of these callbacks in arch/x86/events/intel/uncore.c:
- uncore_event_cpu_online() designates the first CPU it is invoked for
on each package as the uncore event collector for that package
- uncore_event_cpu_offline() if the CPU being offlined is the event
collector for its package, transfers that responsibility over to
the next (by ascending CPU id) one in the same package
With the current order of CPU teardowns in freeze_secondary_cpus(), the
latter ends up doing the ownership transfer work on every single CPU. That
work involves a synchronize_rcu() call, ultimately unnecessarily degrading
the performance of CPU offlining.
To address this make freeze_secondary_cpus() iterate through the CPUs in
reverse order, so that the teardown happens in order of descending CPU IDs.
[ tglx: Massage change log ]
Signed-off-by: Stanislav Spassov <stanspas@amazon.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240524160449.48594-1-stanspas@amazon.de
Fixes the following two Coccinelle/coccicheck warnings reported by
string_choices.cocci:
opportunity for str_plural(num_cpus)
opportunity for str_plural(num_nodes)
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240508154225.309703-2-thorsten.blum@toblux.com
Update peci subsystem to use the same vendor-family-model
combined definition that core x86 code uses.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com>
Link: https://lore.kernel.org/r/20240529171920.62571-1-tony.luck@intel.com
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Commit 4205e4786d ("cpu/hotplug: Provide dynamic range for prepare
stage") added a dynamic range for the prepare states, but did not handle
the assignment of the dynstate variable in __cpuhp_setup_state_cpuslocked().
This causes the corresponding startup callback not to be invoked when
calling __cpuhp_setup_state_cpuslocked() with the CPUHP_BP_PREPARE_DYN
parameter, even though it should be.
Currently, the users of __cpuhp_setup_state_cpuslocked(), for one reason or
another, have not triggered this bug.
Fixes: 4205e4786d ("cpu/hotplug: Provide dynamic range for prepare stage")
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240515134554.427071-1-ytcoode@gmail.com
While updating the cpus node, commit 40c753993e ("powerpc/kexec_file:
Use current CPU info while setting up FDT") first deletes all subnodes
under the /cpus node. However, while adding sub-nodes back, it missed
adding cpus subnodes whose device_type != "cpu", such as l2-cache*,
l3-cache*, ibm,powerpc-cpu-features.
Fix this by only deleting cpus sub-nodes of device_type == "cpus" and
then adding all available nodes with device_type == "cpu".
Fixes: 40c753993e ("powerpc/kexec_file: Use current CPU info while setting up FDT")
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240510102235.2269496-3-sourabhjain@linux.ibm.com
While setting up the FDT for kexec, CPU nodes that are added after the
system boots and reserved memory ranges are incorporated into the
initial_boot_params (base FDT).
However, they are not taken into account when determining the additional
size needed for the kexec FDT. As a result, kexec fails to load,
generating the following error:
[1116.774451] Error updating memory reserve map: FDT_ERR_NOSPACE
kexec_file_load failed: No such process
Therefore, consider the extra size for CPU nodes added post-system boot
and reserved memory ranges while preparing the kexec FDT.
While adding a new parameter to the setup_new_fdt_ppc64 function, it was
noticed that there were a couple of unused parameters, so they were
removed.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240510102235.2269496-2-sourabhjain@linux.ibm.com
Currently in some cases, when the sampled instruction address register
latches to a specific address during sampling, the privilege bits
captured in the sampled event register are incorrect.
For example, a snippet from the perf report on a power10 system is:
Overhead Address Command Shared Object Symbol
........ .................. ............ ................. .......................
2.41% 0x7fff9f94a02c null_syscall [unknown] [k] 0x00007fff9f94a02c
2.20% 0x7fff9f94a02c null_syscall libc.so.6 [.] syscall
perf_get_misc_flags() function looks at the privilege bits to return
the corresponding flags to be used for the address symbol and these
privilege bit details are read from the sampled event register. In the
above snippet, address "0x00007fff9f94a02c" is shown as "k" (kernel) due
to the incorrect privilege bits captured in the sampled event register.
To address this case check whether the sampled address is in the kernel
area. Since this is specific to the latest platform, a new pmu flag
is added called "PPMU_P10" and is used to contain the proposed fix.
PPMU_P10_DD1 marked events are also included under PPMU_P10, hence
remove the code specific to PPMU_P10_DD1 marked events.
Signed-off-by: Anjali K <anjalik@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com <mailto:atrajeev@linux.vnet.ibm.com>>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240528040356.2722275-1-anjalik@linux.ibm.com
D. Wythe says:
====================
Introduce IPPROTO_SMC
This patch allows to create smc socket via AF_INET,
similar to the following code,
/* create v4 smc sock */
v4 = socket(AF_INET, SOCK_STREAM, IPPROTO_SMC);
/* create v6 smc sock */
v6 = socket(AF_INET6, SOCK_STREAM, IPPROTO_SMC);
There are several reasons why we believe it is appropriate here:
1. For smc sockets, it actually use IPv4 (AF-INET) or IPv6 (AF-INET6)
address. There is no AF_SMC address at all.
2. Create smc socket in the AF_INET(6) path, which allows us to reuse
the infrastructure of AF_INET(6) path, such as common ebpf hooks.
Otherwise, smc have to implement it again in AF_SMC path. Such as:
1. Replace IPPROTO_TCP with IPPROTO_SMC in the socket() syscall
initiated by the user, without the use of LD-PRELOAD.
2. Select whether immediate fallback is required based on peer's port/ip
before connect().
A very significant result is that we can now use eBPF to implement smc_run
instead of LD_PRELOAD, who is completely ineffective in scenarios of static
linking.
Another potential value is that we are attempting to optimize the
performance of fallback socks, where merging socks is an important part,
and it relies on the creation of SMC sockets under the AF_INET path.
(More information :
https://lore.kernel.org/netdev/1699442703-25015-1-git-send-email-alibuda@linux.alibaba.com/T/)
v2 -> v1:
- Code formatting, mainly including alignment and annotation repair.
- move inet_smc proto ops to inet_smc.c, avoiding af_smc.c becoming too bulky.
- Fix the issue where refactoring affects the initialization order.
- Fix compile warning (unused out_inet_prot) while CONFIG_IPV6 was not set.
v3 -> v2:
- Add Alibaba's copyright information to the newfile
v4 -> v3:
- Fix some spelling errors
- Align function naming style with smc_sock_init() to smc_sk_init()
- Reversing the order of the conditional checks on clcsock to make the code more intuitive
v5 -> v4:
- Fix some spelling errors
- Added comment, "/* CONFIG_IPV6 */", after the final #endif directive.
- Rename smc_inet.h and smc_inet.c to smc_inet.h and smc_inet.c
- Encapsulate the initialization and destruction of inet_smc in inet_smc.c,
rather than implementing it directly in af_smc.c.
- Remove useless header files in smc_inet.h
- Make smc_inet_prot_xxx and smc_inet_sock_init() to be static, since it's
only used in smc_inet.c
v6 -> v5:
- Wrapping lines to not exceed 80 characters
- Combine initialization and error handling of smc_inet6 into the same #if
macro block.
v7 -> v6:
- Modify the value of IPPROTO_SMC to 256 so that it does not affect IPPROTO-MAX
v8 -> v7:
- Remove useless declarations.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch allows to create smc socket via AF_INET,
similar to the following code,
/* create v4 smc sock */
v4 = socket(AF_INET, SOCK_STREAM, IPPROTO_SMC);
/* create v6 smc sock */
v6 = socket(AF_INET6, SOCK_STREAM, IPPROTO_SMC);
There are several reasons why we believe it is appropriate here:
1. For smc sockets, it actually use IPv4 (AF-INET) or IPv6 (AF-INET6)
address. There is no AF_SMC address at all.
2. Create smc socket in the AF_INET(6) path, which allows us to reuse
the infrastructure of AF_INET(6) path, such as common ebpf hooks.
Otherwise, smc have to implement it again in AF_SMC path.
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Tested-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Externalize smc proto operations (smc_xxx) to allow
access from files other than af_smc.c
This is in preparation for the subsequent implementation
of the AF_INET version of SMC.
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Tested-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch aims to isolate the shared components of SMC socket
allocation by introducing smc_sk_init() for sock initialization
and __smc_create_clcsk() for the initialization of clcsock.
This is in preparation for the subsequent implementation of the
AF_INET version of SMC.
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Tested-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I find the behavior of xa_for_each_start() slightly counter-intuitive.
It doesn't end the iteration by making the index point after the last
element. IOW calling xa_for_each_start() again after it "finished"
will run the body of the loop for the last valid element, instead
of doing nothing.
This works fine for netlink dumps if they terminate correctly
(i.e. coalesce or carefully handle NLM_DONE), but as we keep getting
reminded legacy dumps are unlikely to go away.
Fixing this generically at the xa_for_each_start() level seems hard -
there is no index reserved for "end of iteration".
ifindexes are 31b wide, tho, and iterator is ulong so for
for_each_netdev_dump() it's safe to go to the next element.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add device tree property to define auxiliary devices to be added to
Audio Graph Card which is already supported on Simle Card.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/878qz4ry81.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct mtk_adsp_ipc_ops' is not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security.
In order to do it, "struct mtk_adsp_ipc" also needs to be adjusted to this
new const qualifier.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
15533 2383 0 17916 45fc sound/soc/sof/mediatek/mt8195/mt8195.o
After:
=====
text data bss dec hex filename
15557 2367 0 17924 4604 sound/soc/sof/mediatek/mt8195/mt8195.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://msgid.link/r/a45d6b2b5ec040ea0fc78fca662c2dca3f13a49f.1718312321.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the RT5514 audio CODEC bindings to DT Schema. Make bindings
complete by adding 'spi-max-frequency', 'wakeup-source' properties.
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://msgid.link/r/20240616095223.260786-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the ALC5631/RT5631 audio CODEC bindings to DT Schema.
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://msgid.link/r/20240616074936.151267-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With ARCH=arm, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/fsl/imx-pcm-fiq.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/r/20240616-md-arm-sound-soc-fsl-v2-1-228772e81a54@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
syzbot reported a memory leak in nr_create() [0].
Commit 409db27e3a ("netrom: Fix use-after-free of a listening socket.")
added sock_hold() to the nr_heartbeat_expiry() function, where
a) a socket has a SOCK_DESTROY flag or
b) a listening socket has a SOCK_DEAD flag.
But in the case "a," when the SOCK_DESTROY flag is set, the file descriptor
has already been closed and the nr_release() function has been called.
So it makes no sense to hold the reference count because no one will
call another nr_destroy_socket() and put it as in the case "b."
nr_connect
nr_establish_data_link
nr_start_heartbeat
nr_release
switch (nr->state)
case NR_STATE_3
nr->state = NR_STATE_2
sock_set_flag(sk, SOCK_DESTROY);
nr_rx_frame
nr_process_rx_frame
switch (nr->state)
case NR_STATE_2
nr_state2_machine()
nr_disconnect()
nr_sk(sk)->state = NR_STATE_0
sock_set_flag(sk, SOCK_DEAD)
nr_heartbeat_expiry
switch (nr->state)
case NR_STATE_0
if (sock_flag(sk, SOCK_DESTROY) ||
(sk->sk_state == TCP_LISTEN
&& sock_flag(sk, SOCK_DEAD)))
sock_hold() // ( !!! )
nr_destroy_socket()
To fix the memory leak, let's call sock_hold() only for a listening socket.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller.
[0]: https://syzkaller.appspot.com/bug?extid=d327a1f3b12e1e206c16
Reported-by: syzbot+d327a1f3b12e1e206c16@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d327a1f3b12e1e206c16
Fixes: 409db27e3a ("netrom: Fix use-after-free of a listening socket.")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
platform (Julien Panis)
- Fail in case the golden temperature is zero as that means the efuse
data is not correctly set (Julien Panis)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmZvS8YACgkQqDIjiipP
6E+lHQgAsdwIcybdNpwqoD+D6heY4TsL+++h0RS4id6U5e1jvIemfUw1KaSbdaXH
w6lOwSjycl1z8+pywRZ7P1psZGIe9SGXkqoV7WsHr22JfqWToV5IX3d9HJxnvOlq
pvXPH9qJgwb4m2mRtcQq4E+WMAMoXDhbtcFNKtrRqZJOeJQlBm42pdCyTyFLU0Gg
CkQ4d1pWlVZ6hixzsBF/69kDC8aeGVQnYN32X0CkERhqg/RO0DTneGS2hwT5F6oK
icgV4aBh5oSn/gymbdqybZWWmm1dvEmgR24OtTrgNYCgPhb55/QsfHO+gU8r4HIu
q6/D5V7vDr5jZ9FTofm08I2SY2kPvQ==
=O7Iv
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.10-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge thermal driver fixes for 6.10-rc5 from Daniel Lezcano:
"- Remove the filtered mode for mt8188 as it is not supported on this
platform (Julien Panis)
- Fail in case the golden temperature is zero as that means the efuse
data is not correctly set (Julien Panis)"
* tag 'thermal-v6.10-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/mediatek/lvts_thermal: Return error in case of invalid efuse data
thermal/drivers/mediatek/lvts_thermal: Remove filtered mode for mt8188
Previously, the offload data path decrypted the packet before checking
the direction, leading to error logging and packet dropping. However,
dropped packets wouldn't be visible in tcpdump or audit log.
With this fix, the offload path, upon noticing SA direction mismatch,
will pass the packet to the stack without decrypting it. The L3 layer
will then log the error, audit, and drop ESP without decrypting or
decapsulating it.
This also ensures that the slow path records the error and audit log,
making dropped packets visible in tcpdump.
Fixes: 304b44f0d5 ("xfrm: Add dir validation to "in" data path lookup")
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add device-tree bindings for the ATH12K module found in the WCN7850
package.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240605122106.23818-3-brgl@bgdev.pl
Add a PCI compatible for the ATH11K module on QCA6390 and describe the
power inputs from the PMU that it consumes.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240605122106.23818-2-brgl@bgdev.pl
Joe Damato says:
====================
mlx5: Add netdev-genl queue stats
Welcome to v5.
Switched from RFC to just a v5, because I think this is pretty close.
Minor changes from v4 summarized below in the changelog.
Note that my NIC does not seem to support PTP and I couldn't get the
mlnx-tools mlnx_qos script to work, so I was only able to test the
following cases:
- device up at boot
- adjusting queue counts
- device down (e.g. ip link set dev eth4 down)
Please see the commit message of patch 2/2 for more details on output
and test cases.
rfcv4 thread:
https://lore.kernel.org/linux-kernel/20240604004629.299699-1-jdamato@fastly.com/T/
rfcv4 -> v5:
- Patch 1/2: change variable name 'mlx5e_qid' to 'txq_ix'.
- Patch 2/2:
- remove logic in mlx5e_get_queue_stats_rx for PTP. PTP RX are
always reported in base.
- report PTP TX in mlx5e_get_base_stats only if:
- PTP has ever been opened, and
- either PTP is NULL (closed) or the MLX5E_PTP_STATE_TX bit in its
state is not set
Otherwise, PTP TX will be reported when the txq_ix is passed into
mlx5e_get_queue_stats_tx
rfcv3 -> rfcv4:
- Patch 1/2 now creates a mapping (priv->txq2sq_stats) which maps txq
indices to sq_stats structures so stats can be accessed directly.
This mapping is kept up to date along side txq2sq.
- Patch 2/2:
- All mutex_lock/unlock on state_lock has been dropped.
- mlx5e_get_queue_stats_rx now uses ASSERT_RTNL() and has a special
case for PTP. If PTP was ever opened, is currently opened, and the
channel index matches, stats for PTP RX are output.
- mlx5e_get_queue_stats_tx rewritten to use priv->txq2sq_stats. No
corner cases are needed here because any txq idx (passed in as i)
will have an up to date mapping in priv->txq2sq_stats.
- mlx5e_get_base_stats:
- in the RX case:
- iterates from [params.num_channels, stats_nch) collecting
stats.
- if ptp was ever opened but is currently closed, add the PTP
stats.
- in the TX case:
- handle 2 cases:
- the channel is available, so sum only the unavailable TCs
[mlx5e_get_dcb_num_tc, max_opened_tc).
- the channel is unavailable, so sum all TCs [0, max_opened_tc).
- if ptp was ever opened but is currently closed, add the PTP
sq stats.
v2 -> rfcv3:
- Added patch 1/2 which creates some helpers for computing the txq_ix
and ch_ix/tc_ix.
- Patch 2/2 modified in several ways:
- Fixed variable declarations in mlx5e_get_queue_stats_rx to be at
the start of the function.
- mlx5e_get_queue_stats_tx rewritten to access sq stats directly by
using the helpers added in the previous patch.
- mlx5e_get_base_stats modified in several ways:
- Took the state_lock when accessing priv->channels.
- For the base RX stats, code was simplified to call
mlx5e_get_queue_stats_rx instead of repeating the same code.
- For the base TX stats, I attempted to implement what I think
Tariq suggested in the previous thread:
- for available channels, only unavailable TC stats are summed
- for unavailable channels, all stats for TCs up to
max_opened_tc are summed.
v1 - > v2:
- Essentially a full rewrite after comments from Jakub, Tariq, and
Zhu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
./cli.py --spec netlink/specs/netdev.yaml \
--dump qstats-get --json '{"scope": "queue"}'
...snip
{'ifindex': 7,
'queue-id': 62,
'queue-type': 'rx',
'rx-alloc-fail': 0,
'rx-bytes': 105965251,
'rx-packets': 179790},
{'ifindex': 7,
'queue-id': 0,
'queue-type': 'tx',
'tx-bytes': 9402665,
'tx-packets': 17551},
...snip
Also tested with the script tools/testing/selftests/drivers/net/stats.py
in several scenarios to ensure stats tallying was correct:
- on boot (default queue counts)
- adjusting queue count up or down (ethtool -L eth0 combined ...)
The tools/testing/selftests/drivers/net/stats.py brings the device up,
so to test with the device down, I did the following:
$ ip link show eth4
7: eth4: <BROADCAST,MULTICAST> mtu 9000 qdisc mq state DOWN [..snip..]
[..snip..]
$ cat /proc/net/dev | grep eth4
eth4: 235710489 434811 [..snip rx..] 2878744 21227 [..snip tx..]
$ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \
--dump qstats-get --json '{"ifindex": 7}'
[{'ifindex': 7,
'rx-alloc-fail': 0,
'rx-bytes': 235710489,
'rx-packets': 434811,
'tx-bytes': 2878744,
'tx-packets': 21227}]
Compare the values in /proc/net/dev match the output of cli for the same
device, even while the device is down.
Note that while the device is down, per queue stats output nothing
(because the device is down there are no queues):
$ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \
--dump qstats-get --json '{"scope": "queue", "ifindex": 7}'
[]
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mlx5 currently maps txqs to an sq via priv->txq2sq. It is useful to map
txqs to sq_stats, as well, for direct access to stats.
Add priv->txq2sq_stats and insert mappings. The mappings will be used
next to tabulate stats information.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the handling of the disabling FBC when VT-d is active wa
as part of the intel_fbc_check_plane(). As the hw is still there,
intel_fbc_sanitize should be able to handle the state properly.
v2: update the patch description (Jani Nikula)
v3: fix the return value in wa handling (Jani Nikula)
Bspec: 21664
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240528114826.134958-1-vinod.govindapillai@intel.com
Retimers support lane margining as well so make this available through
debugfs in the same way as we do for the USB4 ports. When this is
enabled we also expose retimers on the other side of the cable because
typically margining is implemented only on direction towards the cable.
However, for the retimers on the other side of the cable we do not allow
NVM upgrade to avoid confusing the existing userspace (the same retimer
may now appear twice with different name) and is probably not a good
idea anyway.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In order to add lane margining support for retimers make the margining
functions take sideband target and retimer index as parameters. This
makes it possible to access both router and retimer sideband using the
same functions.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
