This commit allows rcutorture to test double-call_srcu() when the
CONFIG_DEBUG_OBJECTS_RCU_HEAD Kconfig option is enabled. The non-raw
sdp structure's ->spinlock will be acquired in call_srcu(), hence this
commit also removes the current IRQ and preemption disabling so as to
avoid lockdep complaints.
Link: https://lore.kernel.org/all/20240407112714.24460-1-qiang.zhang1211@gmail.com/
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This reverts commit 28319d6dc5. The race
it fixed was subject to conditions that don't exist anymore since:
1612160b91 ("rcu-tasks: Eliminate deadlocks involving do_exit() and RCU tasks")
This latter commit removes the use of SRCU that used to cover the
RCU-tasks blind spot on exit between the tasklist's removal and the
final preemption disabling. The task is now placed instead into a
temporary list inside which voluntary sleeps are accounted as RCU-tasks
quiescent states. This would disarm the deadlock initially reported
against PID namespace exit.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The bypass lock contention mitigation assumes there can be at most
2 contenders on the bypass lock, following this scheme:
1) One kthread takes the bypass lock
2) Another one spins on it and increment the contended counter
3) A third one (a bypass enqueuer) sees the contended counter on and
busy loops waiting on it to decrement.
However this assumption is wrong. There can be only one CPU to find the
lock contended because call_rcu() (the bypass enqueuer) is the only
bypass lock acquire site that may not already hold the NOCB lock
beforehand, all the other sites must first contend on the NOCB lock.
Therefore step 2) is impossible.
The other problem is that the mitigation assumes that contenders all
belong to the same rdp CPU, which is also impossible for a raw spinlock.
In theory the warning could trigger if the enqueuer holds the bypass
lock and another CPU flushes the bypass queue concurrently but this is
prevented from all flush users:
1) NOCB kthreads only flush if they successfully _tried_ to lock the
bypass lock. So no contention management here.
2) Flush on callbacks migration happen remotely when the CPU is offline.
No concurrency against bypass enqueue.
3) Flush on deoffloading happen either locally with IRQs disabled or
remotely when the CPU is not yet online. No concurrency against
bypass enqueue.
4) Flush on barrier entrain happen either locally with IRQs disabled or
remotely when the CPU is offline. No concurrency against
bypass enqueue.
For those reasons, the bypass lock contention mitigation isn't needed
and is even wrong. Remove it but keep the warning reporting a contended
bypass lock on a remote CPU, to keep unexpected contention awareness.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Upon NOCB deoffloading, the rcuo kthread must be forced to sleep
until the corresponding rdp is ever offloaded again. The deoffloader
clears the SEGCBLIST_OFFLOADED flag, wakes up the rcuo kthread which
then notices that change and clears in turn its SEGCBLIST_KTHREAD_CB
flag before going to sleep, until it ever sees the SEGCBLIST_OFFLOADED
flag again, should a re-offloading happen.
Upon NOCB offloading, the rcuo kthread must be forced to wake up and
handle callbacks until the corresponding rdp is ever deoffloaded again.
The offloader sets the SEGCBLIST_OFFLOADED flag, wakes up the rcuo
kthread which then notices that change and sets in turn its
SEGCBLIST_KTHREAD_CB flag before going to check callbacks, until it
ever sees the SEGCBLIST_OFFLOADED flag cleared again, should a
de-offloading happen again.
This is all a crude ad-hoc and error-prone kthread (un-)parking
re-implementation.
Consolidate the behaviour with the appropriate API instead.
[ paulmck: Apply Qiang Zhang feedback provided in Link: below. ]
Link: https://lore.kernel.org/all/20240509074046.15629-1-qiang.zhang1211@gmail.com/
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The (de-)offloading process used to take care about the NOCB timer when
it depended on the per-rdp NOCB locking. However this isn't the case
anymore for a long while. It can now safely be armed and run during the
(de-)offloading process, which doesn't care about it anymore.
Update the comments accordingly.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The parts explaining the bypass lifecycle in (de-)offloading are out
of date and/or wrong. Bypass is simply enabled whenever SEGCBLIST_RCU_CORE
flag is off.
Fix the comments accordingly.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There is no direct RCU counterpart to lockdep_assert_irqs_disabled()
and friends. Although it is possible to construct them, it would
be more convenient to have the following lockdep assertions:
lockdep_assert_in_rcu_read_lock()
lockdep_assert_in_rcu_read_lock_bh()
lockdep_assert_in_rcu_read_lock_sched()
lockdep_assert_in_rcu_reader()
This commit therefore creates them.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Convention for examples is to only show what's covered by the binding,
so drop the consumer "socionext,milbeaut-usio-uart" and input clock
provider "fixed-clock" from the example. "socionext,milbeaut-usio-uart"
is also not documented by a schema which caused a warning.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240520222646.1741958-1-robh@kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add a MODULE_DESCRIPTION() on all drivers that miss it to avoid
modpost warnings.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240528121320.160685-1-angelogioacchino.delregno@collabora.com
Tested-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
save_area of per-CPU svm_data are dominantly accessed from their
own local CPUs, so allocate them node-local for performance reason
so rename __snp_safe_alloc_page as snp_safe_alloc_page_node which
accepts numa node id as input parameter, svm_cpu_init call it with
node id switched from cpu id
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240520120858.13117-4-lirongqing@baidu.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The allocation for the per-CPU save area in svm_cpu_init shouldn't
be accounted, So introduce __snp_safe_alloc_page helper, which has
gfp flag as input, svm_cpu_init calls __snp_safe_alloc_page with
GFP_KERNEL, snp_safe_alloc_page calls __snp_safe_alloc_page with
GFP_KERNEL_ACCOUNT as input
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240520120858.13117-3-lirongqing@baidu.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The input parameter 'vcpu' in snp_safe_alloc_page is not used.
Therefore, remove it.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240520120858.13117-2-lirongqing@baidu.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/clk_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/clk-gate_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/clk-fractional-divider_test.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240602-md-clk-test-v1-1-a6afd4793337@quicinc.com
[sboyd@kernel.org: Reword header and description]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sprd/clk-sprd.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240602-md-clk-sprd-v1-1-de0884ea6fc7@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The current security_inode_setxattr() and security_inode_removexattr()
hooks rely on individual LSMs to either call into the associated
capability hooks (cap_inode_setxattr() or cap_inode_removexattr()), or
return a magic value of 1 to indicate that the LSM layer itself should
perform the capability checks. Unfortunately, with the default return
value for these LSM hooks being 0, an individual LSM hook returning a
1 will cause the LSM hook processing to exit early, potentially
skipping a LSM. Thankfully, with the exception of the BPF LSM, none
of the LSMs which currently register inode xattr hooks should end up
returning a value of 1, and in the BPF LSM case, with the BPF LSM hooks
executing last there should be no real harm in stopping processing of
the LSM hooks. However, the reliance on the individual LSMs to either
call the capability hooks themselves, or signal the LSM with a return
value of 1, is fragile and relies on a specific set of LSMs being
enabled. This patch is an effort to resolve, or minimize, these
issues.
Before we discuss the solution, there are a few observations and
considerations that we need to take into account:
* BPF LSM registers an implementation for every LSM hook, and that
implementation simply returns the hook's default return value, a
0 in this case. We want to ensure that the default BPF LSM behavior
results in the capability checks being called.
* SELinux and Smack do not expect the traditional capability checks
to be applied to the xattrs that they "own".
* SELinux and Smack are currently written in such a way that the
xattr capability checks happen before any additional LSM specific
access control checks. SELinux does apply SELinux specific access
controls to all xattrs, even those not "owned" by SELinux.
* IMA and EVM also register xattr hooks but assume that the LSM layer
and specific LSMs have already authorized the basic xattr operation.
In order to ensure we perform the capability based access controls
before the individual LSM access controls, perform only one capability
access control check for each operation, and clarify the logic around
applying the capability controls, we need a mechanism to determine if
any of the enabled LSMs "own" a particular xattr and want to take
responsibility for controlling access to that xattr. The solution in
this patch is to create a new LSM hook, 'inode_xattr_skipcap', that is
not exported to the rest of the kernel via a security_XXX() function,
but is used by the LSM layer to determine if a LSM wants to control
access to a given xattr and avoid the traditional capability controls.
Registering an inode_xattr_skipcap hook is optional, if a LSM declines
to register an implementation, or uses an implementation that simply
returns the default value (0), there is no effect as the LSM continues
to enforce the capability based controls (unless another LSM takes
ownership of the xattr). If none of the LSMs signal that the
capability checks should be skipped, the capability check is performed
and if access is granted the individual LSM xattr access control hooks
are executed, keeping with the DAC-before-LSM convention.
Cc: stable@vger.kernel.org
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
- Compile fix for cxl-test from missing linux/vmalloc.h
- Fix for memregion leaks in devm_cxl_add_region()
-----BEGIN PGP SIGNATURE-----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=GuxH
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dave Jiang:
- Compile fix for cxl-test from missing linux/vmalloc.h
- Fix for memregion leaks in devm_cxl_add_region()
* tag 'cxl-fixes-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region: Fix memregion leaks in devm_cxl_add_region()
cxl/test: Add missing vmalloc.h for tools/testing/cxl/test/mem.c
Magic numbers are used to manipulate the bit fields of
FIXED_CTR_CTRL MSR. This makes reading code become difficult, so use
pre-defined macros to replace these magic numbers.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240430005239.13527-3-dapeng1.mi@linux.intel.com
[sean: drop unnecessary curly braces]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Several '_mask' suffixed variables such as, global_ctrl_mask, are
defined in kvm_pmu structure. However the _mask suffix is ambiguous and
misleading since it's not a real mask with positive logic. On the contrary
it represents the reserved bits of corresponding MSRs and these bits
should not be accessed.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240430005239.13527-2-dapeng1.mi@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use preserve_config in place of checking for PCI_PROBE_ONLY flag to enable
support for "linux,pci-probe-only" on a per host bridge basis.
This also obviates the use of adding PCI_REASSIGN_ALL_BUS flag if
!PCI_PROBE_ONLY, as pci_assign_unassigned_root_bus_resources() takes care
of reassigning the resources that are not already claimed.
Link: https://lore.kernel.org/r/20240508174138.3630283-5-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add of_pci_preserve_config() to look for the "linux,pci-probe-only"
property under a specified node. If it's not found there, look under
"of_chosen" in addition.
If the caller didn't specify a node, look under "of_chosen".
With a future patch, this will support "linux,pci-probe-only" on a per host
bridge basis based on the presence of the property in the respective PCI
host bridge DT node.
Implement of_pci_check_probe_only() using of_pci_preserve_config().
Link: https://lore.kernel.org/r/20240508174138.3630283-3-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Move the PRESERVE_BOOT_CONFIG _DSM evaluation from acpi_pci_root_create()
to pci_register_host_bridge().
This will help unify the ACPI _DSM path and the DT-based
"linux,pci-probe-only" paths.
This should be safe because it happens earlier than it used to:
acpi_pci_root_create
pci_create_root_bus
pci_register_host_bridge
+ bridge->preserve_config = pci_preserve_config(bridge)
pci_acpi_preserve_config
+ acpi_evaluate_dsm_typed(DSM_PCI_PRESERVE_BOOT_CONFIG)
- acpi_evaluate_dsm_typed(DSM_PCI_PRESERVE_BOOT_CONFIG)
No functional change intended.
Link: https://lore.kernel.org/r/20240508174138.3630283-2-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add ck_icn_p_iwdg1, ck_icn_p_pka, ck_icn_p_rng, ck_icn_p_saes,
ck_icn_p_serc clocks.
They could be configured for non secured world.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Link: https://lore.kernel.org/r/20240529131310.260954-3-gabriel.fernandez@foss.st.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use an STM32 access controller to filter the registration of clocks.
If a clock is used by the security world, then it must not registered.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Link: https://lore.kernel.org/r/20240529131310.260954-2-gabriel.fernandez@foss.st.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Only the indirect SP with sp->role.level <= KVM_MAX_HUGEPAGE_LEVEL might
have leaf gptes, so allocation of shadowed translation cache is needed
only for it. Then, it can use sp->shadowed_translation to determine
whether to use the information in the shadowed translation cache or not.
Also, extend the WARN in FNAME(sync_spte)() to ensure that this won't
break shadow_mmu_get_sp_for_split().
Suggested-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Link: https://lore.kernel.org/r/5b0cda8a7456cda476b14fca36414a56f921dd52.1715398655.git.houwenlong.hwl@antgroup.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
In case of error during ima_fs_init() all the dentry already created
are removed. {ascii, binary}_securityfs_measurement_lists are freed
calling for each array the remove_securityfs_measurement_lists(). This
function, at the end, assigns to zero the securityfs_measurement_list_count.
This causes during the second call of remove_securityfs_measurement_lists()
to leave the dentry of the array pending, not removing them correctly,
because the securityfs_measurement_list_count is already zero.
Move the securityfs_measurement_list_count = 0 after the two
remove_securityfs_measurement_lists() calls to correctly remove all the
dentry already allocated.
Fixes: 9fa8e76250 ("ima: add crypto agility support for template-hash algorithm")
Signed-off-by: Enrico Bravi <enrico.bravi@polito.it>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
If only isolated partitions are being created underneath the cgroup root,
there will only be one sched domain with top_cpuset.effective_cpus. We can
skip the unnecessary sched domains scanning code and save some cycles.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
A recent "cleanup" broke IIO channel read outs and thereby thermal
mitigation on the Lenovo ThinkPad X13s by returning zero instead of the
expected IIO value type in iio_read_channel_processed_scale():
thermal thermal_zone12: failed to read out thermal zone (-22)
Fixes: 3092bde731 ("iio: inkern: move to the cleanup.h magic")
Cc: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240530074416.13697-1-johan+linaro@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use IRQ ONESHOT flag to ensure the timestamp is not updated in the
hard handler during the thread handler. And use a fixed value of 1
sample that correspond to this first timestamp.
This way we can ensure the timestamp is always corresponding to the
value used by the timestamping mechanism. Otherwise, it is possible
that between FIFO count read and FIFO processing the timestamp is
overwritten in the hard handler.
Fixes: 111e1abd00 ("iio: imu: inv_mpu6050: use the common inv_sensors timestamp module")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240527150117.608792-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch fixes two issues regarding the sampling frequency setting:
-The attribute was set as per device, not per channel. As such, when
setting the sampling frequency, the configuration was always done for
the slot 0, and the correct configuration was applied on the next
channel configuration call by the LRU mechanism.
-The LRU implementation does not take into account external settings of
the slot registers. When setting the sampling frequency directly to a
slot register in write_raw(), there is no guarantee that other channels
were not also using that slot and now incorrectly retain their config
as live.
Set the sampling frequency attribute as separate in the channel templates.
Do not set the sampling directly to the slot register in write_raw(),
just mark the config as not live and let the LRU mechanism handle it.
As the reg variable is no longer used, remove it.
Fixes: 76a1e6a428 ("iio: adc: ad7173: add AD7173 driver")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Link: https://lore.kernel.org/r/20240530-ad7173-fixes-v3-5-b85f33079e18@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The previous value of the append status bit was not cleared before
setting the new value. This caused the bit to remain set after enabling
buffered mode for multiple channels and not permit further buffered
reads from a single channel after the fact.
Fixes: 76a1e6a428 ("iio: adc: ad7173: add AD7173 driver")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Link: https://lore.kernel.org/r/20240530-ad7173-fixes-v3-4-b85f33079e18@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To pick the changes from:
2a82bb0294 ("statx: stx_subvol")
This silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/stat.h include/uapi/linux/stat.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZlnK2Fmx_gahzwZI@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf_map_lookup_elem is invoked in bpf_prog3() already, no need to invoke
it again. This patch drops it.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/ea8458462b876ee445173e3effb535fd126137ed.1716446893.git.tanggeliang@kylinos.cn
The value of recv in msg_loop may be negative, like EWOULDBLOCK, so it's
necessary to check if it is positive before accumulating it to bytes_recvd.
Fixes: 16962b2404 ("bpf: sockmap, add selftests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/5172563f7c7b2a2e953cef02e89fc34664a7b190.1716446893.git.tanggeliang@kylinos.cn
The array size of map_fd[] is 9, not 8. This patch changes it as a more
general form: ARRAY_SIZE(map_fd).
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/0972529ee01ebf8a8fd2b310bdec90831c94be77.1716446893.git.tanggeliang@kylinos.cn
The program fds can be got by using bpf_program__fd(progs[]), then
prog_fd becomes useless. This patch drops it.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/9a6335e4d8dbab23c0d8906074457ceddd61e74b.1716446893.git.tanggeliang@kylinos.cn
bpf_program__attach_sockmap() needs to take a parameter of type bpf_program
instead of an fd, so tx_prog_fd becomes useless. This patch uses a pointer
tx_prog to point to an item in progs[] array.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/23b37f932c547dd1ebfe154bbc0b0e957be21ee6.1716446893.git.tanggeliang@kylinos.cn
Switch attachments to bpf_link using bpf_program__attach_sockmap() instead
of bpf_prog_attach().
This patch adds a new array progs[] to replace prog_fd[] array, set in
populate_progs() for each program in bpf object.
And another new array links[] to save the attached bpf_link. It is
initalized as NULL in populate_progs, set as the return valuses of
bpf_program__attach_sockmap(), and detached by bpf_link__detach().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/32cf8376a810e2e9c719f8e4cfb97132ed2d1f9c.1716446893.git.tanggeliang@kylinos.cn
There's already a definition of i in run_options() at the beginning, no
need to define a new one in "if (tx_prog_fd > 0)" block.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/8d690682330a59361562bca75d6903253d16f312.1716446893.git.tanggeliang@kylinos.cn
The values of tx_prog_fd in run_options() should not be 0, so set it as -1
in else branch, and test it using "if (tx_prog_fd > 0)" condition, not
"if (tx_prog_fd)" or "if (tx_prog_fd >= 0)".
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/08b20ffc544324d40939efeae93800772a91a58e.1716446893.git.tanggeliang@kylinos.cn
Pull base x86 KVM support for running SEV-SNP guests from Michael Roth:
* add some basic infrastructure and introduces a new KVM_X86_SNP_VM
vm_type to handle differences versus the existing KVM_X86_SEV_VM and
KVM_X86_SEV_ES_VM types.
* implement the KVM API to handle the creation of a cryptographic
launch context, encrypt/measure the initial image into guest memory,
and finalize it before launching it.
* implement handling for various guest-generated events such as page
state changes, onlining of additional vCPUs, etc.
* implement the gmem/mmu hooks needed to prepare gmem-allocated pages
before mapping them into guest private memory ranges as well as
cleaning them up prior to returning them to the host for use as
normal memory. Because those cleanup hooks supplant certain
activities like issuing WBINVDs during KVM MMU invalidations, avoid
duplicating that work to avoid unecessary overhead.
This merge leaves out support support for attestation guest requests
and for loading the signing keys to be used for attestation requests.
- No need to use mask when hart-index-bits is 0
- Fix incorrect reg_subtype labels in kvm_riscv_vcpu_set_reg_isa_ext()
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEZdn75s5e6LHDQ+f/rUjsVaLHLAcFAmZZ/j0ACgkQrUjsVaLH
LAcLyg//Tz9gFc7kTPR9kBLhDgTytS0WuBDnh8P09bGAv/36+AJZ8ZbXDTvh44Ul
w1sLYjDVW08kCWxkTg9VPVxv467O3E7F1bduXMTBI2EBZxPul+T+p8Rv9iunAGD/
945nkCpAMOl6xiaIFlIISvOH1aviTp/0YcmFGaE3AcbBb7kEaZ2MONuvffedSGV4
5/MkAKtHpKj7Rekjrnpz0Nl+KVqYqCMS8PAvJNKQgG/e7MC2IHfRX+2GYnBZH1ur
cENKUotSbmrzoeA9nmB8Yl74qgW/OA7fUU5CBb/x7JYl5oZbQs203z8ve9XIqcwk
HtQEOp0G/EL3rmQanZl47zWG0ySI5pXRglc7DC8lnyiKjd9+Ut7VIqAVCd4H4ZC5
5c413zPxrCtEEK+tnkrvnvK+Hks5ZtqXMfpFJQSf0twXt5JpBlgzVL6Suf48/9sA
IRkkt4kq/XVq4ZErkeHE/pH1kwVqYMfjUHlc0L0dChcA2lNARQbfO+P215xU/H9d
1ym02fL6P5ZCjzW0t+IfdvK6u7EbI9nAyBw/+8cW8ppPoJBP5AaiBKfWz20XcasE
3Vktr7njqJf/eaI9oyUnTlkfaktb4Ll8WPnifZgsc9zMJQtCVw1TK4Q1bMtDJ1zX
GcQlGlu7i1vrmkUUXPE37aQehuUBYk7rmX6B+CW56ILUm62hS0A=
=oPq/
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-fixes-6.10-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv fixes for 6.10, take #1
- No need to use mask when hart-index-bits is 0
- Fix incorrect reg_subtype labels in kvm_riscv_vcpu_set_reg_isa_ext()
* Fixes and debugging help for the #VE sanity check. Also disable
it by default, even for CONFIG_DEBUG_KERNEL, because it was found
to trigger spuriously (most likely a processor erratum as the
exact symptoms vary by generation).
* Avoid WARN() when two NMIs arrive simultaneously during an NMI-disabled
situation (GIF=0 or interrupt shadow) when the processor supports
virtual NMI. While generally KVM will not request an NMI window
when virtual NMIs are supported, in this case it *does* have to
single-step over the interrupt shadow or enable the STGI intercept,
in order to deliver the latched second NMI.
* Drop support for hand tuning APIC timer advancement from userspace.
Since we have adaptive tuning, and it has proved to work well,
drop the module parameter for manual configuration and with it a
few stupid bugs that it had.
'klist_test_struct' has been unused since the original
commit 57b4f760f9 ("list: test: Test the klist structure").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
* Fixes and debugging help for the #VE sanity check. Also disable
it by default, even for CONFIG_DEBUG_KERNEL, because it was found
to trigger spuriously (most likely a processor erratum as the
exact symptoms vary by generation).
* Avoid WARN() when two NMIs arrive simultaneously during an NMI-disabled
situation (GIF=0 or interrupt shadow) when the processor supports
virtual NMI. While generally KVM will not request an NMI window
when virtual NMIs are supported, in this case it *does* have to
single-step over the interrupt shadow or enable the STGI intercept,
in order to deliver the latched second NMI.
* Drop support for hand tuning APIC timer advancement from userspace.
Since we have adaptive tuning, and it has proved to work well,
drop the module parameter for manual configuration and with it a
few stupid bugs that it had.
Remove support for specifying a static local APIC timer advancement value,
and instead present a read-only boolean parameter to let userspace enable
or disable KVM's dynamic APIC timer advancement. Realistically, it's all
but impossible for userspace to specify an advancement that is more
precise than what KVM's adaptive tuning can provide. E.g. a static value
needs to be tuned for the exact hardware and kernel, and if KVM is using
hrtimers, likely requires additional tuning for the exact configuration of
the entire system.
Dropping support for a userspace provided value also fixes several flaws
in the interface. E.g. KVM interprets a negative value other than -1 as a
large advancement, toggling between a negative and positive value yields
unpredictable behavior as vCPUs will switch from dynamic to static
advancement, changing the advancement in the middle of VM creation can
result in different values for vCPUs within a VM, etc. Those flaws are
mostly fixable, but there's almost no justification for taking on yet more
complexity (it's minimal complexity, but still non-zero).
The only arguments against using KVM's adaptive tuning is if a setup needs
a higher maximum, or if the adjustments are too reactive, but those are
arguments for letting userspace control the absolute max advancement and
the granularity of each adjustment, e.g. similar to how KVM provides knobs
for halt polling.
Link: https://lore.kernel.org/all/20240520115334.852510-1-zhoushuling@huawei.com
Cc: Shuling Zhou <zhoushuling@huawei.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240522010304.1650603-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As documented in APM[1], LBR Virtualization must be enabled for SEV-ES
guests. Although KVM currently enforces LBRV for SEV-ES guests, there
are multiple issues with it:
o MSR_IA32_DEBUGCTLMSR is still intercepted. Since MSR_IA32_DEBUGCTLMSR
interception is used to dynamically toggle LBRV for performance reasons,
this can be fatal for SEV-ES guests. For ex SEV-ES guest on Zen3:
[guest ~]# wrmsr 0x1d9 0x4
KVM: entry failed, hardware error 0xffffffff
EAX=00000004 EBX=00000000 ECX=000001d9 EDX=00000000
Fix this by never intercepting MSR_IA32_DEBUGCTLMSR for SEV-ES guests.
No additional save/restore logic is required since MSR_IA32_DEBUGCTLMSR
is of swap type A.
o KVM will disable LBRV if userspace sets MSR_IA32_DEBUGCTLMSR before the
VMSA is encrypted. Fix this by moving LBRV enablement code post VMSA
encryption.
[1]: AMD64 Architecture Programmer's Manual Pub. 40332, Rev. 4.07 - June
2023, Vol 2, 15.35.2 Enabling SEV-ES.
https://bugzilla.kernel.org/attachment.cgi?id=304653
Fixes: 376c6d2850 ("KVM: SVM: Provide support for SEV-ES vCPU creation/loading")
Co-developed-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Message-ID: <20240531044644.768-4-ravi.bangoria@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
