On Octal DTR capable flashes like Micron Xcella reads cannot start or
end at an odd address in Octal DTR mode. Extra bytes need to be read at
the start or end to make sure both the start address and length remain
even.
To avoid allocating too much extra memory, thereby putting unnecessary
memory pressure on the system, the temporary buffer containing the extra
padding bytes is capped at PAGE_SIZE bytes. The rest of the 2-byte
aligned part should be read directly in the main buffer.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20250708091646.292-1-ziniu.wang_1@nxp.com
Logging messages that show some type of "out of memory" error are generally
unnecessary as there is a generic message and a stack dump done by the
memory subsystem. These messages generally increase kernel size without
much added value[1].
The dev_err_probe() doesn't do anything when error is '-ENOMEM'. Therefore,
remove the useless call to dev_err_probe(), and just return the value
instead.
[1]: https://lore.kernel.org/lkml/1402419340.30479.18.camel@joe-AO725/
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250820131416.500048-1-liaoyuanhong@vivo.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Using a single value of 22500000 for both 48000Hz and 44100Hz audio
will sometimes result in returning wrong dividers due to rounding.
Update the code to use the actual value for both.
Fixes: 51b2bb3f25 ("ASoC: wm8974: configure pll and mclk divider automatically")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250821082639.1301453-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a single value of 22500000 for both 48000Hz and 44100Hz audio
will sometimes result in returning wrong dividers due to rounding.
Update the code to use the actual value for both.
Fixes: 294833fc9e ("ASoC: wm8940: Rewrite code to set proper clocks")
Reported-by: Ankur Tyagi <ankur.tyagi85@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Ankur Tyagi <ankur.tyagi85@gmail.com>
Link: https://patch.msgid.link/20250821082639.1301453-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for 2bit grayscale and use it for XRGB8888 when grayscale is
supported.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20250721-st7571-format-v2-6-159f4134098c@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Convert XRGB8888 to 2bit grayscale.
It uses drm_fb_xrgb8888_to_gray8() to convert the pixels to gray8 as an
intermediate step before converting to gray2.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250721-st7571-format-v2-5-159f4134098c@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
As reported by Stephen, building docs with O= is now
broken. Fix it by ensuring that it will seek files under
Kernel source tree.
The original logic was defined to accept including files
under Documentation/output. The new logic doesn't need it
anymore for media, but it might still be useful to preserve
the previous behavior. So, I ended preserving it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20250901142639.4de35a11@canb.auug.org.au/
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/da91980ce42f31730dc982920167b2757b9d2769.1756732363.git.mchehab+huawei@kernel.org
Simon Schuster <schuster.simon@siemens-energy.com> says:
This series adds support for the clone3 system call to the nios2
architecture. This addresses the build-time warning "warning: clone3()
entry point is missing, please fix" introduced in 505d66d1ab
("clone3: drop __ARCH_WANT_SYS_CLONE3 macro"). The implementation passes
the relevant clone3 tests of kselftest when applied on top of
next-20250815:
./run_kselftest.sh
TAP version 13
1..4
# selftests: clone3: clone3
ok 1 selftests: clone3: clone3
# selftests: clone3: clone3_clear_sighand
ok 2 selftests: clone3: clone3_clear_sighand
# selftests: clone3: clone3_set_tid
ok 3 selftests: clone3: clone3_set_tid
# selftests: clone3: clone3_cap_checkpoint_restore
ok 4 selftests: clone3: clone3_cap_checkpoint_restore
The series also includes a small patch to kernel/fork.c that ensures
that clone_flags are passed correctly on architectures where unsigned
long is insufficient to store the u64 clone_flags. It is marked as a fix
for stable backporting.
As requested, in v2, this series now further tries to correct this type
error throughout the whole code base. Thus, it now touches a larger
number of subsystems and all architectures.
Therefore, another test was performed for ARCH=x86_64 (as a
representative for 64-bit architectures). Here, the series builds cleanly
without warnings on defconfig with CONFIG_SECURITY_APPARMOR=y and
CONFIG_SECURITY_TOMOYO=y (to compile-check the LSM-related changes).
The build further successfully passes testing/selftests/clone3 (with the
patch from 20241105062948.1037011-1-zhouyuhang1010@163.com to prepare
clone3_cap_checkpoint_restore for compatibility with the newer libcap
version on my system).
* patches from https://lore.kernel.org/20250901-nios2-implement-clone3-v2-0-53fcf5577d57@siemens-energy.com:
nios2: implement architecture-specific portion of sys_clone3
arch: copy_thread: pass clone_flags as u64
copy_process: pass clone_flags as u64 across calltree
copy_sighand: Handle architectures where sizeof(unsigned long) < sizeof(u64)
Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-0-53fcf5577d57@siemens-energy.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
This commit adds the sys_clone3 entry point for nios2. An
architecture-specific wrapper (__sys_clone3) is required to save and
restore additional registers to the kernel stack via SAVE_SWITCH_STACK
and RESTORE_SWITCH_STACK.
Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com>
Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-4-53fcf5577d57@siemens-energy.com
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
With the introduction of clone3 in commit 7f192e3cd3 ("fork: add
clone3") the effective bit width of clone_flags on all architectures was
increased from 32-bit to 64-bit, with a new type of u64 for the flags.
However, for most consumers of clone_flags the interface was not
changed from the previous type of unsigned long.
While this works fine as long as none of the new 64-bit flag bits
(CLONE_CLEAR_SIGHAND and CLONE_INTO_CGROUP) are evaluated, this is still
undesirable in terms of the principle of least surprise.
Thus, this commit fixes all relevant interfaces of the copy_thread
function that is called from copy_process to consistently pass
clone_flags as u64, so that no truncation to 32-bit integers occurs on
32-bit architectures.
Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com>
Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-3-53fcf5577d57@siemens-energy.com
Fixes: c5febea095 ("fork: Pass struct kernel_clone_args into copy_thread")
Acked-by: Guo Ren (Alibaba Damo Academy) <guoren@kernel.org>
Acked-by: Andreas Larsson <andreas@gaisler.com> # sparc
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
With the introduction of clone3 in commit 7f192e3cd3 ("fork: add
clone3") the effective bit width of clone_flags on all architectures was
increased from 32-bit to 64-bit, with a new type of u64 for the flags.
However, for most consumers of clone_flags the interface was not
changed from the previous type of unsigned long.
While this works fine as long as none of the new 64-bit flag bits
(CLONE_CLEAR_SIGHAND and CLONE_INTO_CGROUP) are evaluated, this is still
undesirable in terms of the principle of least surprise.
Thus, this commit fixes all relevant interfaces of callees to
sys_clone3/copy_process (excluding the architecture-specific
copy_thread) to consistently pass clone_flags as u64, so that
no truncation to 32-bit integers occurs on 32-bit architectures.
Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com>
Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-2-53fcf5577d57@siemens-energy.com
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
With the introduction of clone3 in commit 7f192e3cd3 ("fork: add
clone3") the effective bit width of clone_flags on all architectures was
increased from 32-bit to 64-bit. However, the signature of the copy_*
helper functions (e.g., copy_sighand) used by copy_process was not
adapted.
As such, they truncate the flags on any 32-bit architectures that
supports clone3 (arc, arm, csky, m68k, microblaze, mips32, openrisc,
parisc32, powerpc32, riscv32, x86-32 and xtensa).
For copy_sighand with CLONE_CLEAR_SIGHAND being an actual u64
constant, this triggers an observable bug in kernel selftest
clone3_clear_sighand:
if (clone_flags & CLONE_CLEAR_SIGHAND)
in function copy_sighand within fork.c will always fail given:
unsigned long /* == uint32_t */ clone_flags
#define CLONE_CLEAR_SIGHAND 0x100000000ULL
This commit fixes the bug by always passing clone_flags to copy_sighand
via their declared u64 type, invariant of architecture-dependent integer
sizes.
Fixes: b612e5df45 ("clone3: add CLONE_CLEAR_SIGHAND")
Cc: stable@vger.kernel.org # linux-5.5+
Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com>
Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-1-53fcf5577d57@siemens-energy.com
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Depending on which display that is connected to the controller, an
"1" means either a black or a white pixel.
The supported formats (R1/R2/XRGB8888) expects the pixels
to map against (4bit):
00 => Black
01 => Dark Gray
10 => Light Gray
11 => White
If this is not what the display map against, make it possible to invert
the pixels.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20250721-st7571-format-v2-4-159f4134098c@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Depending on which display that is connected to the controller, an "1"
means either a black or a white pixel.
The supported format (R1) expects the pixels to map against:
0 => Black
1 => White
If this is not what the display map against, the controller has support
to invert these values.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250721-st7571-format-v2-3-159f4134098c@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Depending on which display that is connected to the controller, an "1"
means either a black or a white pixel.
The supported formats (R1/R2/XRGB8888) expects the pixels
to map against (4bit):
00 => Black
01 => Dark Gray
10 => Light Gray
11 => White
If this is not what the display map against, the controller has support
to invert these values.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250721-st7571-format-v2-2-159f4134098c@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
The comment describes the pixel data format as stated in
the st7571 datasheet, which is not necessary the same
as for the connected display.
Instead, describe the expected pixel data format which is used for
R1/R2/XRGB8888.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20250721-st7571-format-v2-1-159f4134098c@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Now that the vbios code uses a non-bound `Device` instance, store an
`ARef` to it at construction time so we can use it for logging without
having to carry an extra argument on every method for that sole purpose.
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250808-vbios_device-v1-2-834bbbab6471@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
The passed pci::Device is exclusively used for logging purposes, so it
can be replaced by a regular device::Device, which allows us to remove
the `as_ref()` indirections at each logging site.
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250808-vbios_device-v1-1-834bbbab6471@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Change the 'ret' variable from u32 to int to store negative error codes or
zero returned by of_property_read_u32().
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Fixes: 0fbeae70ee ("regulator: add SCMI driver")
Link: https://patch.msgid.link/20250829101411.625214-1-rongqianfeng@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Samsung S3C24xx family of SoCs was removed from the Linux kernel in the
commit 61b7f8920b ("ARM: s3c: remove all s3c24xx support"), in January
2023. There are no in-kernel users of its compatibles and platform IDs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Change the 'ret' variable from u32 to int in pl35x_nand_probe() to store
negative error codes or zero;
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but can be confusing. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
While enabling clock, we incorrectly log 'ref clk' as 'cfg ahb clk'
Fix this since the devicetree bindings mentions it as ref clock.
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250826105254.3758803-1-prashanth.k@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We have 2 similar functions, both converts date from snd_kcontrol to
snd_soc_component.
(A) snd_soc_kcontrol_component()
(B) snd_soc_dapm_kcontrol_component()
(A) is just wrapper for snd_kcontrol_chip().
(B) is for more complex conversion.
Having similar functions is confusable. So (A) will be replaced to
original snd_kcontrol_chip(). (B) will be stay, but the function
name should be xx_to_xx().
And it is defined at soc-component.h. It should be implemented at
soc-dapm.c.
This patch renames it to snd_soc_dapm_kcontrol_to_component(), and
move to soc-dapm.c.
This patch keeps compatible by using define, but old name will be replaced
on each drivers and removed from ASoC in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/871poyy53x.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dapm_kcontrol_get_value() is global function, adds snd_soc_ prefix
This patch keeps compatible by using define, but old name will be replaced
on each drivers and removed from ASoC in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87349ey546.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dapm_kcontrol_dapm() is unclear naming, rename it to
snd_soc_dapm_kcontrol_to_dapm(). This is prepare for dapm cleanup.
This patch keeps compatible by using define, but old name will be replaced
on each drivers and removed from ASoC in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/874ituy54c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dapm_kcontrol_widget() is unclear naming, rename it to
snd_soc_dapm_kcontrol_to_widget(). This is prepare for dapm cleanup.
This patch keeps compatible by using define, but old name will be replaced
on each drivers and removed from ASoC in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/875xeay54j.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
driver support indirect read and indirect write operation with
assumption no force device removal(unbind) operation. However
force device removal(removal) is still available to root superuser.
Unbinding driver during operation causes kernel crash. This changes
ensure driver able to handle such operation for indirect read and
indirect write by implementing refcount to track attached devices
to the controller and gracefully wait and until attached devices
remove operation completed before proceed with removal operation.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Niravkumar L Rabara <nirav.rabara@altera.com>
Link: https://patch.msgid.link/8704fd6bd2ff4d37bba4a0eacf5eba3ba001079e.1756168074.git.khairul.anuar.romli@altera.com
Signed-off-by: Mark Brown <broonie@kernel.org>
S32G doesn't have the max prescale erratum (default) and it can query
the max number of CS from hardware, so add those settings.
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-9-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add query_hw_for_num_cs in devtype to avoid directly checking compatible
string "fsl,imx93-spi".
No functionality change.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-8-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This erratum only ever results in a max value of 1, otherwise the full 3
bits are available. To avoid repeating the same default prescale value
for every new device's devdata, treat 0 as no limit (7) and only set a
value when the erratum is present.
Change the field to be 3 bits to catch out of range definitions.
No functionality change.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-7-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add compatible strings 'nxp,s32g2-lpspi' and 'nxp,s32g3-lpspi' for S32G2
and S32G3. Require nxp,s32g3-lpspi to fallback to nxp,s32g2-lpspi since
they are currently compatible.
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-5-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Clear the error flags after disabling the module to avoid the case when
a flag is set again between flag clear and module disable. And use
SR_CLEAR_MASK to replace hardcoded value for improved readability.
Although fsl_lpspi_reset() was only introduced in commit a15dc3d657
("spi: lpspi: Fix CLK pin becomes low before one transfer"), the
original driver only reset SR in the interrupt handler, making it
vulnerable to the same issue. Therefore the fixes commit is set at the
introduction of the driver.
Fixes: 5314987de5 ("spi: imx: add lpspi bus driver")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-4-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In DMA mode fsl_lpspi_reset() is always called at the end, even when the
transfer is aborted. In PIO mode aborts skip the reset leaving the FIFO
filled and the module enabled.
Fix it by always calling fsl_lpspi_reset().
Fixes: a15dc3d657 ("spi: lpspi: Fix CLK pin becomes low before one transfer")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-3-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver currently supports multiple chip-selects, but only sets the
polarity for the first one (CS 0). Fix it by setting the PCSPOL bit for
the desired chip-select.
Fixes: 5314987de5 ("spi: imx: add lpspi bus driver")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-2-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 6a13044849 ("spi: lpspi: Fix wrong transmission when don't use
CONT") breaks transmissions when CONT is used. The TDIE interrupt should
not be disabled in all cases. If CONT is used and the TX transfer is not
yet completed yet, but the interrupt handler is called because there are
characters to be received, TDIE is replaced with FCIE. When the transfer
is finally completed, SR_TDF is set but the interrupt handler isn't
called again.
Fixes: 6a13044849 ("spi: lpspi: Fix wrong transmission when don't use CONT")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-1-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Some devices might not use the DMIC function of the RT712VB.
Therefore, this patch avoids skipping the blind write with RT712VB.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20250901085757.1287945-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add phy and pll regulator load voting support for all supported
platforms by introducing dedicated regulator bulk data arrays
with their load values.
This ensures stable operation and proper power management for these
platforms where regulators are shared between the QMP UFS PHY and
other IP blocks by setting appropriate regulator load currents during
PHY operations.
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20250830070353.2694-3-nitin.rawat@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On certain SoCs, power regulators are shared between the QMP UFS PHY
and other IP blocks. To ensure proper operation, the regulator
framework must be informed of the UFS PHY's load requirements.
This is essential because the regulator's operating mode—whether Low
Power or High Power—depends on the maximum expected load at any given
time, which the regulator driver needs to manage accordingly.
To support this, replace devm_regulator_bulk_get() with
devm_regulator_bulk_get_const() and inline the qmp_ufs_vreg_init()
function. additionally replace the array of regulator names with a
bulk regulator data structure, and utilize the init_load_uA field
provided by the regulator framework. This ensures that
regulator_set_load() is automatically invoked before the
first enable operation.
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250830070353.2694-2-nitin.rawat@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Simplifies error handling by replacing the manual check
of the return value with the `to_result` helper.
Signed-off-by: Onur Özkan <work@onurozkan.dev>
Link: https://lore.kernel.org/20250821091001.28563-1-work@onurozkan.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
