[Changes from V1:
- The warning to disable is -Wmaybe-uninitialized, not -Wuninitialized.
- This warning is only supported in GCC.]
The BPF selftest verifier_global_subprogs.c contains code that
purposedly performs out of bounds access to memory, to check whether
the kernel verifier is able to catch them. For example:
__noinline int global_unsupp(const int *mem)
{
if (!mem)
return 0;
return mem[100]; /* BOOM */
}
With -O1 and higher and no inlining, GCC notices this fact and emits a
"maybe uninitialized" warning. This is by design. Note that the
emission of these warnings is highly dependent on the precise
optimizations that are performed.
This patch adds a compiler pragma to verifier_global_subprogs.c to
ignore these warnings.
Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Cc: david.faust@oracle.com
Cc: cupertino.miranda@oracle.com
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240507184756.1772-1-jose.marchesi@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce the capability to dynamically configure the maximum file
note size for ELF core dumps via sysctl.
Why is this being done?
We have observed that during a crash when there are more than 65k mmaps
in memory, the existing fixed limit on the size of the ELF notes section
becomes a bottleneck. The notes section quickly reaches its capacity,
leading to incomplete memory segment information in the resulting coredump.
This truncation compromises the utility of the coredumps, as crucial
information about the memory state at the time of the crash might be
omitted.
This enhancement removes the previous static limit of 4MB, allowing
system administrators to adjust the size based on system-specific
requirements or constraints.
Eg:
$ sysctl -a | grep core_file_note_size_limit
kernel.core_file_note_size_limit = 4194304
$ sysctl -n kernel.core_file_note_size_limit
4194304
$echo 519304 > /proc/sys/kernel/core_file_note_size_limit
$sysctl -n kernel.core_file_note_size_limit
519304
Attempting to write beyond the ceiling value of 16MB
$echo 17194304 > /proc/sys/kernel/core_file_note_size_limit
bash: echo: write error: Invalid argument
Signed-off-by: Vijay Nag <nagvijay@microsoft.com>
Signed-off-by: Allen Pais <apais@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240506193700.7884-1-apais@linux.microsoft.com
Signed-off-by: Kees Cook <keescook@chromium.org>
In of_modalias(), if the buffer happens to be too small even for the 1st
snprintf() call, the len parameter will become negative and str parameter
(if not NULL initially) will point beyond the buffer's end. Add the buffer
overflow check after the 1st snprintf() call and fix such check after the
strlen() call (accounting for the terminating NUL char).
Fixes: bc575064d6 ("of/device: use of_property_for_each_string to parse compatible strings")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/bbfc6be0-c687-62b6-d015-5141b93f313e@omp.ru
Signed-off-by: Rob Herring <robh@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmY61iEUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vwtwA//Zw8a27/+cHuciYCOYMIrjhucBUCc
qHBdzDWTy+h3gkfbcRFfXs3XaIBhlGbtI1d0GG5FyMuqicxCsF/mCIyc2LSTMIUo
4201qVl/EGrNIBhOVcZtK+CFQmwmw1AaBdz7q4dS4/549xXGQ+/8DibAjfUlcDgC
2iIkcvfNW9Hj9n4tFezNSPLewGVgFY2yFpImLHZc2hAuSXQ0P0D9JEDUUVVIWg/c
PSJQKKita/fxgKk8RRCTRdpVezAtd7QO8V4Ae5gGH+oho4nRvCO0kYGteglx7/ab
ReNtfNUPJN9h7M5ZYpyiNp1aZTaMEp3P+gMsD9ohV0/+5MNNAiZhDLPguQaEy/2n
ZiQh5K3vwQb2NStJXauiBqJ+NHeqf8m3mk76X3/hxma6wqDfEOsRvYaexwY+Wxfa
I0tzjZF1LBepsoFyDJM/5S+3nCJoqaCUAy1ZbGXwsBAAzZHw6x9+ieJfJhnCOL96
kkNiNlxs8OJTTMl6F8W88NvMnhmCF0JxSOVTfxTaVwCaD6GwpnMNpXSEXqXPlVL1
jMRHr/hZ7JjHarELC/TGe1uUmPsBhIym862XV+7E+9uUbcWldwjBijuSZQ9zUpX2
UL0Cc2gJzyh/GwpeDVCyBGaINxzNVq3D5H6rYHlWQP+dp59stt/UBqBWJmerTHjy
QQ+9+XS/CiElUL8=
=EQN9
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Update kernel-parameters doc to describe "pcie_aspm=off" more
accurately (Bjorn Helgaas)
- Restore the parent's (not the child's) ASPM state to the parent
during resume, which fixes a reboot during resume (Kai-Heng Feng)
* tag 'pci-v6.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/ASPM: Restore parent state to parent, child state to child
PCI/ASPM: Clarify that pcie_aspm=off means leave ASPM untouched
PCI_HEADER_TYPE_MULTIFUNC is define by e1000e and ixgbe and both are
unused. There is already PCI_HEADER_TYPE_MFD in pci_regs.h anyway which
should be used instead so remove the duplicated defines of it.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
During successful probe, igc logs this:
[ 5.133667] igc 0000:01:00.0 (unnamed net_device) (uninitialized): PHC added
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The reason is that igc_ptp_init() is called very early, even before
register_netdev() has been called. So the netdev_info() call works
on a partially uninitialized netdev.
Fix this by calling igc_ptp_init() after register_netdev(), right
after the media autosense check, just as in igb. Add a comment,
just as in igb.
Now the log message is fine:
[ 5.200987] igc 0000:01:00.0 eth0: PHC added
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice_clear_dflt_vsi() is only removing default rule. Both default RX and
TX rule should be removed during release.
If it isn't switching to switchdev, second time results in error, because
TX filter is already there.
Fix it by removing the correct set of rules.
Fixes: 50d62022f4 ("ice: default Tx rule instead of to queue")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This driver currently doesn't support any control flags.
Use flow_rule_match_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_match_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This driver currently doesn't support any control flags.
Use flow_rule_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This driver currently doesn't support any control flags.
Use flow_rule_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The cs_dsp instance is initialized in the driver probe() so it
should be freed in the driver remove(). Also fix a missing call
to cs_dsp_remove() in the error path of cs35l56_hda_common_probe().
The call to cs_dsp_remove() was being done in the component unbind
callback cs35l56_hda_unbind(). This meant that if the driver was
unbound and then re-bound it would be using an uninitialized cs_dsp
instance.
It is best to initialize the cs_dsp instance in probe() so that it
can return an error if it fails. The component binding API doesn't
have any error handling so there's no way to handle a failure if
cs_dsp was initialized in the bind.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://lore.kernel.org/r/20240508100811.49514-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move the initialization of the shared struct hda_component array into
hda_component_manager_bind().
The purpose of the manager bind() callback is to allow it to perform
initialization before binding in the component drivers. This is the
correct place to initialize the shared data.
The original implementation initialized the shared data in
hda_component_manager_init(). This is only done once during probe()
of the manager driver. So if the component binding was unbound and
then rebound, the shared data would not be re-initialized.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: fd895a74dc ("ALSA: hda: realtek: Move hda_component implementation to module")
Link: https://lore.kernel.org/r/20240508100347.47283-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the control private_free callback to free the associated data
block. This ensures that the memory won't leak, whatever way the
control gets destroyed.
The original implementation didn't actually remove the ALSA
controls in hda_cs_dsp_control_remove(). It only freed the internal
tracking structure. This meant it was possible to remove/unload the
amp driver while leaving its ALSA controls still present in the
soundcard. Obviously attempting to access them could cause segfaults
or at least dereferencing stale pointers.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 3233b978af ("ALSA: hda: hda_cs_dsp_ctl: Add Library to support CS_DSP ALSA controls")
Link: https://lore.kernel.org/r/20240508095627.44476-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-10-tiwai@suse.de
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-9-tiwai@suse.de
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Cc: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-8-tiwai@suse.de
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-7-tiwai@suse.de
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-6-tiwai@suse.de
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-5-tiwai@suse.de
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-4-tiwai@suse.de
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-3-tiwai@suse.de
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-2-tiwai@suse.de
dump_config_tree() is declared to return an int, but the compiler cannot
prove that it always returns any value at all. This leads to a clang
warning, when building via:
make LLVM=1 -C tools/testing/selftests
Suggested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506075419.301780-1-perex@perex.cz
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Fix to the proper variable type 'unsigned long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240430121028.30443-1-wsa+renesas@sang-engineering.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This adds support for all sample rates supported by the
hardware,Digidesign Mbox 3 supports: {44100, 48000, 88200, 96000}
Fixes syncing clock issues that presented as pops. To test this, without
this patch playing 440hz tone produces pops.
Clock is now synced between playback and capture interfaces so no more
latency drift issue when using pipewire pro-profile.
(https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/3900)
Signed-off-by: Manuel Barrio Linares <mbarriolinares@gmail.com>
Link: https://lore.kernel.org/r/20240430171020.192285-1-mbarriolinares@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
IRQs used for CS35L41 HDA are used to detect and attempt to recover
from errors. Without these interrupts, the driver should behave as
normal.
For laptops which contain a bad configuration for the interrupt in the
BIOS, the current behaviour of failing when trying to configure the
interrupt means the probe fails, and audio is broken.
It is better for the user experience if the driver instead warns that
no interrupt is configured rather than simply failing.
The drawback is that if an error occurs without the interrupt, we
firstly would not be able to trace the issue, and secondly would not
be able to attempt to recover from the issue, but this is better than
failing immediately.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240429154853.9393-2-sbinding@opensource.cirrus.com
This driver currently doesn't support any control flags.
Use flow_rule_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio via codec driver, too.
Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-13-tiwai@suse.de
CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio sigmatel codec driver, too.
Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-12-tiwai@suse.de
CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio realtek codec driver, too.
Simply drop CONFIG_PM ifdefs. A superfluous __maybe_unused attribute
was dropped as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-11-tiwai@suse.de
CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio HDMI codec driver, too.
Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-10-tiwai@suse.de
CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio generic cs8409 driver, too.
Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-9-tiwai@suse.de
CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio conexant codec driver, too.
Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-8-tiwai@suse.de
CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio cirrus codec driver, too.
Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-7-tiwai@suse.de
CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio ca0132 codec driver, too.
Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-6-tiwai@suse.de
CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio analog codec driver, too.
Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-5-tiwai@suse.de
CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio generic codec driver, too.
Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-4-tiwai@suse.de
CONFIG_PM is almost mandatory nowadays for real systems, but we have
lots of CONFIG_PM dependent code in snd-hda-codec helper code.
Let's reduce the dependencies of CONFIG_PM now. The only visible
drawback would be a couple of superfluous trace entries for runtime
PM, but we can live with that.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-3-tiwai@suse.de
snd-hda-intel contains lots of CONFIG_PM dependent code although
CONFIG_PM is almost mandatory nowadays, and it makes the code
unnecessarily complex.
Let's reduce the dependencies of CONFIG_PM in snd-hda-intel driver
code. I left a few module options to be dependent on CONFIG_PM (which
are visible to users), but other places are either enabled or
optimized by compiler automatically.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-2-tiwai@suse.de
This patch adds kernel-doc comments for the previously undocumented
members `dev` and `wakeup_source` in the struct adc_jack_data in
adc-jack device driver.
Link: https://lore.kernel.org/lkml/20240426100054.61506-1-yang.lee@linux.alibaba.com/
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/lkml/52d0a4317d5372f1135259d4fbbd2822b86ba8f4.1708876186.git.u.kleine-koenig@pengutronix.de/
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/lkml/8914cd71b32e1f6298e65b84fb84370c73b4fe37.1708876186.git.u.kleine-koenig@pengutronix.de/
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>