s390 introduced the Processor Activity Instrumentation (PAI) counter
facility on LPAR and virtual machines z/VM for models 3931 and 3932.
These counters are stored as raw data in the perf.data file and are
displayed with:
# perf report -i /tmp//perfout-635468 -D | grep Counter
Counter:007 <unknown> Value:0x00000000000186a0
Counter:032 <unknown> Value:0x0000000000000001
Counter:032 <unknown> Value:0x0000000000000001
Counter:032 <unknown> Value:0x0000000000000001
#
However on z/VM virtual machines, the counter names are not retrieved
from the PMU and are shown as '<unknown>'. This is caused by the CPU
string saved in the mapfile.csv for this machine:
^IBM.393[12].*3\.7.[[:xdigit:]]+$,3,cf_z16,core
This string contains the CPU Measurement facility first and second
version number and authorization level (3\.7.[[:xdigit:]]+). These
numbers do not apply to the PAI counter facility. In fact they can be
omitted.
Shorten the CPU identification string for this machine to manufacturer
and model. This is sufficient for all PMU devices.
Output after:
# perf report -i /tmp//perfout-635468 -D | grep Counter
Counter:007 km_aes_128 Value:0x00000000000186a0
Counter:032 kma_gcm_aes_256 Value:0x0000000000000001
Counter:032 kma_gcm_aes_256 Value:0x0000000000000001
Counter:032 kma_gcm_aes_256 Value:0x0000000000000001
#
Fixes: b539deafba ("perf report: Add s390 raw data interpretation for PAI counters")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20240404064806.1362876-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The rb3gen2 has UFS memory, adjust the necessary supply voltage and add
the controller and phy nodes to enable this.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240327-rb3gen2-ufs-v2-1-3de6b5dd78dd@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Most of the Galaxy Grand Prime use backlight drivers controlled with PWM
signal.
To simplify the description, add the backlight with the necessary clk-pwm
to the common dtsi.
Signed-off-by: Siddharth Manthan <siddharth.manthan@gmail.com>
[Stephan: Move to fortuna-common and disable on rossa-common]
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Raymond: Add the commit message]
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240404121703.17086-3-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Like msm8916-samsung-a3u-eur, the Grand Prime uses a Zinitix BT541
touchscreen. Add it together with the necessary fixed-regulator to the
device tree.
Signed-off-by: Joe Mason <buddyjojo06@outlook.com>
[Raymond: Move to fortuna-common. Use interrupts-extended]
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240404121703.17086-2-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
sysfs is limited to PAGE_SIZE, and when we're debugging strange
deadlocks/priority inversions we need to see the full list.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Snapshot table accesses generally need to be checking for invalid
snapshot ID now, fix one that was missed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
For the "conflicting/duplicate rules" branch in
filename_trans_read_helper_compat() the Smatch static checker reports:
security/selinux/ss/policydb.c:1953 filename_trans_read_helper_compat()
warn: missing error code 'rc'
While the value of rc will already always be zero here, it is not
obvious that it's the case and that it's the intended return value
(Smatch expects rc to be assigned within 5 lines from the goto).
Therefore, add an explicit assignment just before the goto to make the
intent more clear and the code less error-prone.
Fixes: c3a276111e ("selinux: optimize storage of filename transitions")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/selinux/722b90c4-1f4b-42ff-a6c2-108ea262bd10@moroto.mountain/
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Andrii Nakryiko says:
====================
Inline bpf_get_branch_snapshot() BPF helper
Implement inlining of bpf_get_branch_snapshot() BPF helper using generic BPF
assembly approach. This allows to reduce LBR record usage right before LBR
records are captured from inside BPF program.
See v1 cover letter ([0]) for some visual examples. I dropped them from v2
because there are multiple independent changes landing and being reviewed, all
of which remove different parts of LBR record waste, so presenting final state
of LBR "waste" gets more complicated until all of the pieces land.
[0] https://lore.kernel.org/bpf/20240321180501.734779-1-andrii@kernel.org/
v2->v3:
- fix BPF_MUL instruction definition;
v1->v2:
- inlining of bpf_get_smp_processor_id() split out into a separate patch set
implementing internal per-CPU BPF instruction;
- add efficient divide-by-24 through multiplication logic, and leave
comments to explain the idea behind it; this way inlined version of
bpf_get_branch_snapshot() has no compromises compared to non-inlined
version of the helper (Alexei).
====================
Link: https://lore.kernel.org/r/20240404002640.1774210-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Inline bpf_get_branch_snapshot() helper using architecture-agnostic
inline BPF code which calls directly into underlying callback of
perf_snapshot_branch_stack static call. This callback is set early
during kernel initialization and is never updated or reset, so it's ok
to fetch actual implementation using static_call_query() and call
directly into it.
This change eliminates a full function call and saves one LBR entry
in PERF_SAMPLE_BRANCH_ANY LBR mode.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240404002640.1774210-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
perf_snapshot_branch_stack is set up in an architecture-agnostic way, so
there is no reason for BPF subsystem to keep track of which
architectures do support LBR or not. E.g., it looks like ARM64 might soon
get support for BRBE ([0]), which (with proper integration) should be
possible to utilize using this BPF helper.
perf_snapshot_branch_stack static call will point to
__static_call_return0() by default, which just returns zero, which will
lead to -ENOENT, as expected. So no need to guard anything here.
[0] https://lore.kernel.org/linux-arm-kernel/20240125094119.2542332-1-anshuman.khandual@arm.com/
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240404002640.1774210-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
childregs represents the registers which are active for the new thread
in user context. For a kernel thread, childregs->gp is never used since
the kernel gp is not touched by switch_to. For a user mode helper, the
gp value can be observed in user space after execve or possibly by other
means.
[From the email thread]
The /* Kernel thread */ comment is somewhat inaccurate in that it is also used
for user_mode_helper threads, which exec a user process, e.g. /sbin/init or
when /proc/sys/kernel/core_pattern is a pipe. Such threads do not have
PF_KTHREAD set and are valid targets for ptrace etc. even before they exec.
childregs is the *user* context during syscall execution and it is observable
from userspace in at least five ways:
1. kernel_execve does not currently clear integer registers, so the starting
register state for PID 1 and other user processes started by the kernel has
sp = user stack, gp = kernel __global_pointer$, all other integer registers
zeroed by the memset in the patch comment.
This is a bug in its own right, but I'm unwilling to bet that it is the only
way to exploit the issue addressed by this patch.
2. ptrace(PTRACE_GETREGSET): you can PTRACE_ATTACH to a user_mode_helper thread
before it execs, but ptrace requires SIGSTOP to be delivered which can only
happen at user/kernel boundaries.
3. /proc/*/task/*/syscall: this is perfectly happy to read pt_regs for
user_mode_helpers before the exec completes, but gp is not one of the
registers it returns.
4. PERF_SAMPLE_REGS_USER: LOCKDOWN_PERF normally prevents access to kernel
addresses via PERF_SAMPLE_REGS_INTR, but due to this bug kernel addresses
are also exposed via PERF_SAMPLE_REGS_USER which is permitted under
LOCKDOWN_PERF. I have not attempted to write exploit code.
5. Much of the tracing infrastructure allows access to user registers. I have
not attempted to determine which forms of tracing allow access to user
registers without already allowing access to kernel registers.
Fixes: 7db91e57a0 ("RISC-V: Task implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan O'Rear <sorear@fastmail.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240327061258.2370291-1-sorear@fastmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
patch_map() uses fixmap mappings to circumvent the non-writability of
the kernel text mapping.
The __set_fixmap() function only flushes the current cpu tlb, it does
not emit an IPI so we must make sure that while we use a fixmap mapping,
the current task is not migrated on another cpu which could miss the
newly introduced fixmap mapping.
So in order to avoid any task migration, disable the preemption.
Reported-by: Andrea Parri <andrea@rivosinc.com>
Closes: https://lore.kernel.org/all/ZcS+GAaM25LXsBOl@andrea/
Reported-by: Andy Chiu <andy.chiu@sifive.com>
Closes: https://lore.kernel.org/linux-riscv/CABgGipUMz3Sffu-CkmeUB1dKVwVQ73+7=sgC45-m0AE9RCjOZg@mail.gmail.com/
Fixes: cad539baa4 ("riscv: implement a memset like function for text")
Fixes: 0ff7c3b331 ("riscv: Use text_mutex instead of patch_lock")
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240326203017.310422-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When a PME wake happens due to a SoundWire wake, we currently clear
all WAKESTS bits during the resume operation initiated by the PCI
subsystem. As a result, we are unable to identify which SoundWire
links need to be resumed and don't properly handle jack detection.
This patch only clears the WAKESTS bits for the HDaudio codecs
detected earlier.
Note that we still clear all WAKESTS bits unconditionally in
hda_dsp_ctrl_stop_chip(). The existing behavior is potentially racy if
e.g. a jack event happens during a suspend routine, but there's a risk
of breaking shutdown or reboot sequences so the code is left as is for
now.
Closes: https://github.com/thesofproject/linux/issues/4687
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Keqiao Zhang <keqiao.zhang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240404190357.138073-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since LunarLake, we use the HDadio WAKEEN/WAKESTS to detect wakes for
SoundWire codecs. Unfortunately, the existing code in
hda_codec_jack_wake_enable() unconditionally resets the WAKEEN bits.
This patch changes the initialization to preserve SoundWire WAKEEN
bits. For HDAudio codecs the same strategy is used, WAKEEN is only set
when the jacktbl.used property is set.
Closes: https://github.com/thesofproject/linux/issues/4687
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Keqiao Zhang <keqiao.zhang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240404190357.138073-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The global STATESTS register will provide information on all
links. Rather than iterate on all possible links, the helpers only
filters the range of possible bits for a quick lookup. The
process_wakeen() helper will walk through all the links and deal with
wakes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://msgid.link/r/20240404190357.138073-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason, the programming sequences in the SOF driver do not
include a clear of the WAKE_STS bits before resetting the controller.
This clear is not formally required by the HDaudio specification, but
was added to harden the snd-hda-reset back in 2007. Adding this
sequence back avoids an issue reported by the Intel CI.
Closes: https://github.com/thesofproject/linux/issues/4889
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240404190357.138073-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow the struct acpi_device_ops approach and introduce typedef:s
for the members. It makes code less verbose and more particular on
what parameters we take or types we use.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Check for an error and return it as it's the usual way to handle this.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpi_iommu_configure_id() implementation has a misleading comment
since after it the flow does something different to what it states.
Move the commit to the caller and with that unshadow the error code
inside acpi_iommu_configure_id().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To replace list_empty() + list_first_entry() pair to simplify code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update header inclusions to follow the IWYU (Include What You Use)
principle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move list head node to be the first member in a few data structures
in order to make container_of() no-op at compile time. On x86_64 with
a custom (default + a few dozens of drivers enabled) configuration:
add/remove: 0/0 grow/shrink: 5/12 up/down: 21/-124 (-103)
...
Total: Before=39924675, After=39924572, chg -0.00%
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Print the instruction dump with info instead of emergency level. The
unhandled signal message is only for informational purpose.
Fixes: b8a03a6341 ("riscv: add userland instruction dump to RISC-V splats")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://lore.kernel.org/r/mvmy1aegrhm.fsf@suse.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The pinctrl-single driver handles pin_config_set by looking up the
requested setting in a DT-defined lookup table, which defines what bits
correspond to each setting. There is no way to add
PIN_CONFIG_BIAS_DISABLE entries to the table, since there is instead
code to disable the bias by applying the disable values of both the
pullup and pulldown entries in the table.
However, this code is inside the table-lookup loop, so it would only
execute if there is an entry for PIN_CONFIG_BIAS_DISABLE in the table,
which can never exist, so this code never runs.
This commit lifts the offending code out of the loop, so it just
executes directly whenever PIN_CONFIG_BIAS_DISABLE is requested,
skippipng the table lookup loop.
This also introduces a new `param` variable to make the code slightly
more readable.
This bug seems to have existed when this code was first merged in commit
9dddb4df90 ("pinctrl: single: support generic pinconf"). Earlier
versions of this patch did have an entry for PIN_CONFIG_BIAS_DISABLE in
the lookup table, but that was removed, which is probably how this bug
was introduced.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Message-ID: <20240319110633.230329-1-matthijs@stdin.nl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In "struct pcs_function", the 'pgnames' and 'npgnames' fields are unused.
This is a left-over from commit 571aec4df5 ("pinctrl: single: Use generic
pinmux helpers for managing functions");
Remove them.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-ID: <a6b653642298d35b1e3656e9bfc6d1b322fbbe68.1712004518.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In "struct max77620_pin_info", the 'pull_config' field is unused.
In "struct max77620_pctrl_info", the 'pins_current_opt' field is unused.
Remove them.
On my x86_64 config, with allmodconfig, this shrinks the struct
max77620_pctrl_info from 360 bytes to 296.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-ID: <60af8968864ae4a83a76e589b39a2b1e1f65c9db.1711992588.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Yoda grammar and multiple negatives are unclear.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240404185448.136157-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HDaudio stream interrupts are ignored unless the stream is PCM or
compressed audio. For alternate non-audio usages, such as code loader
or SoundWire BPT case, the IOC interrupt on the last buffer
transferred is silently ignored.
This patch adds a 'struct completion' for each HDaudio stream. This
capability helps detect if the non-audio data transfers
completed. There is no performance impact for audio streams.
In the code loader case, the code currently starts the DMA and
directly checks if the firmware status changes, without checking if
the DMA succeeded. With a first pass waiting for the DMA to complete,
system validation engineers can gather more precise timing information
on firmware boot time or root-cause boot failures more accurately.
A timeout of 500ms was selected for the code loader DMA. This is an
experimental value which should be more than enough - higher values
would certainly be problematic from a usage/latency perspective.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240404185448.136157-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to reuse cl_prepare, cl_trigger and cl_cleanup helpers from a
SoundWire context where only the device information is
available. Rather than pass the 'sdev' argument, use get_drvdata() to
retrieve the required structure.
For consistency, rename hda_cl_stream_prepare() as hda_cl_prepare().
These three helpers are also exported so that they can be referenced
from another module.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240404185448.136157-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code conflates capture stream and ICCMAX stream. This
isn't going to be true any longer when we add support for SDW BPT RX
streams. Add a boolean tag to flag ICCMAX streams.
No functionality change, only future-proofing change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240404185448.136157-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While we don't have the full flow protection when devcoredump
is accessed after device unbind. Let's at least for now
protect against null dereference:
[ 422.766508] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 423.119584] RIP: 0010:xe_vm_snapshot_free+0x30/0x180 [xe]
While at it, I also fixed a non-standard code-declaration block
on the similar function of xe_guc_submit.
v2: - Use IS_ERR_OR_NULL (Nirmoy)
- Expand to other functions
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240403195044.239766-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZg7vEAAKCRDbK58LschI
gxAeAQD18uHqGbcCCnOVnaETdi3bQcSBpobuclThpN1WdMILcwEA+5Vz9Lxmt6BH
qF/vbVHAOeCZt3LTOJ/jx1GRVstVWQk=
=+QKv
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-04-04
We've added 7 non-merge commits during the last 5 day(s) which contain
a total of 9 files changed, 75 insertions(+), 24 deletions(-).
The main changes are:
1) Fix x86 BPF JIT under retbleed=stuff which causes kernel panics due to
incorrect destination IP calculation and incorrect IP for relocations,
from Uros Bizjak and Joan Bruguera Micó.
2) Fix BPF arena file descriptor leaks in the verifier,
from Anton Protopopov.
3) Defer bpf_link deallocation to after RCU grace period as currently
running multi-{kprobes,uprobes} programs might still access cookie
information from the link, from Andrii Nakryiko.
4) Fix a BPF sockmap lock inversion deadlock in map_delete_elem reported
by syzkaller, from Jakub Sitnicki.
5) Fix resolve_btfids build with musl libc due to missing linux/types.h
include, from Natanael Copa.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Prevent lock inversion deadlock in map delete elem
x86/bpf: Fix IP for relocating call depth accounting
x86/bpf: Fix IP after emitting call depth accounting
bpf: fix possible file descriptor leaks in verifier
tools/resolve_btfids: fix build with musl libc
bpf: support deferring bpf_link dealloc to after RCU grace period
bpf: put uprobe link's path and task in release callback
====================
Link: https://lore.kernel.org/r/20240404183258.4401-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Typing e.nl_msg.error when processing exception is a bit tedious
and counter-intuitive. Set a local .error member to the positive
value of the netlink level error.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240403023426.1762996-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When interfacing with the ethtool commands it's handy to
be able to use the names of the flags. Example:
ethnl.pause_get({"header": {"dev-index": cfg.ifindex,
"flags": {'stats'}}})
Note that not all commands accept all the flags,
but the meaning of the bits does not change command
to command.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240403023426.1762996-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 1b600da510 ("PM: EM: Optimize em_cpu_energy() and remove division")
has added back map_util_perf() in em_cpu_energy() computation which has
been removed with the rework of scheduler/cpufreq interface.
This is wrong because sugov_effective_cpu_perf() already takes care of
mapping the utilization to a performance level.
Fixes: 1b600da510 ("PM: EM: Optimize em_cpu_energy() and remove division")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
This patchset impacts UAPI.
The only known users of the soc-topology ABI v4 are Chromebook
configurations. Starting from kernel v5.4, all of them are making use of
soc-topology ABI v5. The patchset first removes obsolete code from the
Intel's skylake-driver - the driver of choice for the mentioned
Chromebooks - and then proceeds with removal of relevant soc-topology.c
and uapi bits.
Cezary Rojewski (4):
ASoC: Intel: Skylake: Remove soc-topology ABI v4 support
ASoC: topology: Remove ABI v4 support
ASoC: topology: Cleanup after ABI v4 support removal
ASoC: topology: Remove obsolete ABI v4 structs
include/uapi/sound/asoc.h | 56 ------
include/uapi/sound/skl-tplg-interface.h | 74 --------
sound/soc/intel/skylake/skl-topology.c | 169 -----------------
sound/soc/soc-topology.c | 241 ++----------------------
4 files changed, 18 insertions(+), 522 deletions(-)
--
2.25.1
When adding sanitization of the label, the path through
edge_detector_setup() that leads to debounce_setup() was overlooked.
A request taking this path does not allocate a new label and the
request label is freed twice when the request is released, resulting
in memory corruption.
Add label sanitization to debounce_setup().
Cc: stable@vger.kernel.org
Fixes: b34490879b ("gpio: cdev: sanitize the label before requesting the interrupt")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
[Bartosz: rebased on top of the fix for empty GPIO labels]
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This patch addresses an issue in the selftests/harness where an
assertion within FIXTURE_TEARDOWN could trigger an infinite loop.
The problem arises because the teardown procedure is meant to
execute once, but the presence of failing assertions (ASSERT_EQ(0, 1))
leads to repeated attempts to execute teardown due to
the long jump mechanism used by the harness for handling assertions.
To resolve this, the patch ensures that the teardown process
runs only once, regardless of assertion outcomes, preventing
the infinite loop and allowing tests to fail.
A simple test demo(test.c):
#include "kselftest_harness.h"
FIXTURE(f)
{
int fd;
};
FIXTURE_SETUP(f)
{
self->fd = 0;
}
FIXTURE_TEARDOWN(f)
{
TH_LOG("TEARDOWN");
ASSERT_EQ(0, 1);
self->fd = -1;
}
TEST_F(f, open_close)
{
ASSERT_NE(self->fd, 1);
}
TEST_HARNESS_MAIN
will always output the following output due to a dead loop until timeout:
# test.c:15:open_close:TEARDOWN
# test.c:16:open_close:Expected 0 (0) == 1 (1)
# test.c:15:open_close:TEARDOWN
# test.c:16:open_close:Expected 0 (0) == 1 (1)
...
But here's what we should and expect to get:
TAP version 13
1..1
# Starting 1 tests from 2 test cases.
# RUN f.open_close ...
# test.c:15:open_close:TEARDOWN
# test.c:16:open_close:Expected 0 (0) == 1 (1)
# open_close: Test terminated by assertion
# FAIL f.open_close
not ok 1 f.open_close
# FAILED: 0 / 1 tests passed.
# Totals: pass:0 fail:1 xfail:0 xpass:0 skip:0 error:0
also this is related to the issue mentioned in this patch
https://patchwork.kernel.org/project/linux-kselftest/patch/e2ba3f8c-80e6-477d-9cea-1c9af820e0ed@alu.unizg.hr/
Signed-off-by: Shengyu Li <shengyu.li.evgeny@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a fixed regulator to model the power supply to the camera connector.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20240402000424.4650-10-laurent.pinchart@ideasonboard.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The cm4-io board comes with a PCF85063 on I2C0, connected to the GPIO44
and GPIO45 pins. Add it to the device tree.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20240402000424.4650-9-laurent.pinchart@ideasonboard.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>