Commit graph

1,399,042 commits

Author SHA1 Message Date
Arnd Bergmann
0e6fec6da2 drm/xe/kunit: fix link failure with built-in xe
When the driver is built-in but the tests are in loadable modules,
the helpers don't actually get put into the driver:

ERROR: modpost: "xe_kunit_helper_alloc_xe_device" [drivers/gpu/drm/xe/tests/xe_test.ko] undefined!

Change the Makefile to ensure they are always part of the driver
even when the rest of the kunit tests are in loadable modules.

Fixes: 5095d13d75 ("drm/xe/kunit: Define helper functions to allocate fake xe device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226124736.1272949-1-arnd@kernel.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-02-28 11:38:12 -08:00
Marco Felsch
6b61aae323 dt-bindings: iio: gyroscope: bosch,bmg160: add spi-max-frequency
Make use of the common spi-peripheral-props.yaml to pull in the common
spi device properties and limit the spi-max-frequency to 10 MHz as this
is the max. frequency if VDDIO >= 1.62V.

Note all listed devices can either operate in I2C or in SPI mode.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240221174305.3423039-1-m.felsch@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:38 +00:00
Peng Fan
ca1e2b91ba dt-bindings: iio: adc: imx93: drop the 4th interrupt
Per i.MX93 Reference Mannual Rev.4, 12/2013, there is no interrupt 268,
so drop it.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240226130826.3824251-1-peng.fan@oss.nxp.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:38 +00:00
Krzysztof Kozlowski
051db7ee60 iio: proximity: isl29501: make use of of_device_id table
Reference the of_device_id table in the driver structure, so it will be
used for module autoloading and device matching.  This fixes clang W=1
warning:

  isl29501.c:999:34: error: unused variable 'isl29501_i2c_matches' [-Werror,-Wunused-const-variable]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240225201654.49450-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:38 +00:00
Krzysztof Kozlowski
cc8a587a7c iio: adc: qcom-pm8xxx-xoadc: drop unused kerneldoc struct pm8xxx_chan_info member
Drop description of non-existing 'struct pm8xxx_chan_info' member:

  qcom-pm8xxx-xoadc.c:386: warning: Excess struct member 'scale_fn_type' description in 'pm8xxx_chan_info'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240225202744.60500-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:38 +00:00
Krzysztof Kozlowski
513ea6b7b4 dt-bindings: iio: adc: drop redundant type from label
dtschema defines label as string, so $ref in other bindings is
redundant.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240226123004.91061-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:37 +00:00
Marco Felsch
de42d33955 dt-bindings: iio: ti,tmp117: add optional label property
Add the support to provide an optional label like we do for ADC
channels to identify the device more easily.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240226121234.545662-1-m.felsch@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:37 +00:00
Ondrej Jirman
4953612115 MAINTAINERS: Add an entry for AF8133J driver
As I am submitting the driver and have the device to test. I'll maintain
the driver.

Signed-off-by: Ondrej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20240222011341.3232645-5-megi@xff.cz
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:37 +00:00
Icenowy Zheng
1d8f4b0462 iio: magnetometer: add a driver for Voltafield AF8133J magnetometer
AF8133J is a simple I2C-connected magnetometer, without interrupts.

Add a simple IIO driver for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Dalton Durst <dalton@ubports.com>
Signed-off-by: Shoji Keita <awaittrot@shjk.jp>
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://lore.kernel.org/r/20240222011341.3232645-4-megi@xff.cz
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:37 +00:00
Icenowy Zheng
3b2eaffd2b dt-bindings: iio: magnetometer: Add Voltafield AF8133J
Voltafield AF8133J is a simple magnetometer sensor produced by Voltafield
Technology Corp, with dual power supplies (one for core and one for I/O)
and active-low reset pin.

The sensor has configurable range 1.2 - 2.2 mT and a software controlled
standby mode.

Add a device tree binding for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Ondřej Jirman <megi@xff.cz>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240222011341.3232645-3-megi@xff.cz
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:37 +00:00
Icenowy Zheng
14166bac93 dt-bindings: vendor-prefix: Add prefix for Voltafield
Voltafile Technology Corp. is a company that produces MEMS sensors.

Add a DT vendor prefix for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Ondřej Jirman <megi@xff.cz>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240222011341.3232645-2-megi@xff.cz
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:37 +00:00
Quentin Schulz
9443c19ca6 iio: adc: rockchip_saradc: replace custom logic with devm_reset_control_get_optional_exclusive
devm_reset_control_get_optional_exclusive does what this driver is
trying to do in its probe function, therefore let's switch over to that
subsystem function.

Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240223-saradcv2-chan-mask-v1-3-84b06a0f623a@theobroma-systems.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:37 +00:00
Quentin Schulz
5b4e4b7203 iio: adc: rockchip_saradc: use mask for write_enable bitfield
Some of the registers on the SARADCv2 have bits write protected except
if another bit is set. This is usually done by having the lowest 16 bits
store the data to write and the highest 16 bits specify which of the 16
lowest bits should have their value written to the hardware block.

The write_enable mask for the channel selection was incorrect because it
was just the value shifted by 16 bits, which means it would only ever
write bits and never clear them. So e.g. if someone starts a conversion
on channel 5, the lowest 4 bits would be 0x5, then starts a conversion
on channel 0, it would still be 5.

Instead of shifting the value by 16 as the mask, let's use the OR'ing of
the appropriate masks shifted by 16.

Note that this is not an issue currently because the only SARADCv2
currently supported has a reset defined in its Device Tree, that reset
resets the SARADC controller before starting a conversion on a channel.
However, this reset is handled as optional by the probe function and
thus proper masking should be used in the event an SARADCv2 without a
reset ever makes it upstream.

Fixes: 757953f8ec ("iio: adc: rockchip_saradc: Add support for RK3588")
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240223-saradcv2-chan-mask-v1-2-84b06a0f623a@theobroma-systems.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:37 +00:00
Quentin Schulz
b0a4546df2 iio: adc: rockchip_saradc: fix bitmask for channels on SARADCv2
The SARADCv2 on RK3588 (the only SoC currently supported that has an
SARADCv2) selects the channel through the channel_sel bitfield which is
the 4 lowest bits, therefore the mask should be GENMASK(3, 0) and not
GENMASK(15, 0).

Fixes: 757953f8ec ("iio: adc: rockchip_saradc: Add support for RK3588")
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240223-saradcv2-chan-mask-v1-1-84b06a0f623a@theobroma-systems.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:37 +00:00
Javier Carrasco
b8b393348a dt-bindings: iio: light: vishay,veml6075: make vdd-supply required
The VEML6075 requires a single supply to operate. The property already
exists in the bindings and it is used in the example, but it is still
not on the list of required properties.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240223-veml6075_vdd-v1-1-ac76509b1998@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:37 +00:00
Marius Cristea
0fb528c825 iio: adc: adding support for PAC193x
This is the iio driver for Microchip
PAC193X series of Power Monitor with Accumulator chip family.

Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
Link: https://lore.kernel.org/r/20240222164206.65700-3-marius.cristea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:37 +00:00
Marius Cristea
a8ce0b4e56 dt-bindings: iio: adc: adding support for PAC193X
This is the device tree schema for iio driver for
Microchip PAC193X series of Power Monitors with Accumulator.

Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240222164206.65700-2-marius.cristea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:37 +00:00
Nuno Sa
5cad30ab50 iio: temperature: ltc2983: explicitly set the name in chip_info
Getting the part name with 'spi_get_device_id(spi)->name' is not a very
good pattern. Hence, explicitly add the name in the struct chip_info and
use that instead.

Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240222-ltc2983-misc-improv-v1-4-cf7d4457e98c@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:36 +00:00
Nuno Sa
dccdff35d3 iio: temperature: ltc2983: rename ltc2983_parse_dt()
Rename ltc2983_parse_dt() to ltc2983_parse_fw() as there's no explicit
dependency on devicetree. No functional change intended...

Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240222-ltc2983-misc-improv-v1-2-cf7d4457e98c@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:36 +00:00
Nuno Sa
3bdb96c9d5 iio: temperature: ltc2983: make use of spi_get_device_match_data()
Use spi_get_device_match_data() as it simplifies the code. No functional
change intended...

Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240222-ltc2983-misc-improv-v1-1-cf7d4457e98c@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:36 +00:00
Dan Carpenter
df62153046 iio: adc: ti-ads1298: prevent divide by zero in ads1298_set_samp_freq()
The "val" variable comes from the user so we need to ensure that it's not
zero.  In fact, all negative values are invalid as well.  Add a check for
that.

Fixes: 00ef7708fa ("iio: adc: ti-ads1298: Add driver")
Acked-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/c32c9087-86de-423b-8101-67b4a7f9d728@moroto.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:36 +00:00
Dan Carpenter
debabbb1f2 iio: adc: ti-ads1298: Fix error code in probe()
There is a copy and paste bug here, it should be "reg_vref" instead of
"reg_avdd".  The "priv->reg_avdd" variable is zero so it ends up
returning success.

Fixes: 00ef7708fa ("iio: adc: ti-ads1298: Add driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Mike Looijmans <mike.looijmans@topic.nl>
Link: https://lore.kernel.org/r/5f393a87-ca8b-4e68-a6f4-a79f75a91ccb@moroto.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:36 +00:00
Ramona Gradinariu
8243b2877e docs: iio: add documentation for adis16475 driver
Add documentation for adis16475 driver which describes
the driver device files and shows how the user may use the
ABI for various scenarios (configuration, measurement, etc.).

Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Link: https://lore.kernel.org/r/20240221085848.991413-4-ramona.gradinariu@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:36 +00:00
Ramona Gradinariu
d5422a85ed docs: iio: add documentation for device buffers
Add documentation for IIO device buffers describing buffer
attributes and how data is structured in buffers using
scan elements.

Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Link: https://lore.kernel.org/r/20240221085848.991413-3-ramona.gradinariu@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:36 +00:00
Ramona Gradinariu
a3e58e4aa9 docs: iio: Refactor index.rst
Refactor index.rst such that it contains a section for generic
documentation and a section for Kernel Drivers documentation.

Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Link: https://lore.kernel.org/r/20240221085848.991413-2-ramona.gradinariu@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:36 +00:00
Dumitru Ceclan
a0e7a2b703 iio: amplifiers: hmc425a: add support for LTC6373 Instrumentation Amplifier
This adds support for LTC6373 36 V Fully-Differential Programmable-Gain
Instrumentation Amplifier with 25 pA Input Bias Current.
The user can program the gain to one of seven available settings through
a 3-bit parallel interface (A2 to A0).

Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240220153553.2432-6-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:36 +00:00
Dumitru Ceclan
09ac57ac01 iio: amplifiers: hmc425a: use pointers in match table
Change the match table to use pointers instead of device ids.
Remove type from state as it is not used anymore.

Also make the chip_info structures const.

Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240220153553.2432-4-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:36 +00:00
Dumitru Ceclan
2edb22571e iio: amplifiers: hmc425a: move conversion logic
Move gain-dB<->code conversion logic from read_raw and write_raw to
chip_info callbacks.

Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240220153553.2432-2-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:36 +00:00
Dumitru Ceclan
ff96eb45ba dt-bindings: iio: hmc425a: add entry for LTC6373
The LTC6373 is a silicon, 3-bit Fully-Differential digital instrumentation
amplifier that supports the following programmable gains (Vout/Vin):
 G = 0.25, 0.5, 1, 2, 4, 8, 16 + Shutdown.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Link: https://lore.kernel.org/r/20240220153553.2432-5-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:36 +00:00
Dumitru Ceclan
5c7403abf9 dt-bindings: iio: hmc425a: add conditional GPIO array size constraints
ADRF5740 and HMC540S have a 4 bit parallel interface.
Update ctrl-gpios description and min/maxItems values depending on the
matched compatible to correctly reflect the hardware properties.

Fixes: 79f2ff6461 ("dt-bindings: iio: hmc425a: add entry for ADRF5740 Attenuator")
Fixes: 20f87a9a26 ("dt-bindings: iio: hmc425a: add entry for HMC540S")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Link: https://lore.kernel.org/r/20240220153553.2432-3-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:35 +00:00
Josua Mayer
506d7e3ace dt-bindings: iio: humidity: hdc20x0: add optional interrupts property
HDC2010 and HDC2080 humidity sensors both have an interrupt / data-ready
signal which can be used for signaling to the host.

Add binding for "interrupts" property so that boards wiring this signal
may describe the connection.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://lore.kernel.org/r/20240219-iio-hdc20x0-interrupt-binding-v7-1-c8ffb39c3768@solid-run.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:35 +00:00
Thomas Haemmerle
42e03b0d37 iio: temperature: tmp117: add support for vcc-supply
Add support to specify the VCC supply which is required to power the
device. According the datasheet 7.3.1 Power Up, the device needs 1.5ms
after the supply voltage reaches the operating range before the
communcation can begin.

Signed-off-by: Thomas Haemmerle <thomas.haemmerle@leica-geosystems.com>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20240219131114.134607-2-m.felsch@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:35 +00:00
Thomas Haemmerle
7d87c9b94a dt-bindings: iio: ti,tmp117: add vcc supply binding
Add the binding to specify the vcc supply. We can't make it required
since this would break the backward compatibility.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thomas Haemmerle <thomas.haemmerle@leica-geosystems.com>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20240219131114.134607-1-m.felsch@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:35 +00:00
Arturas Moskvinas
58efe76197 iio: adc: mcp320x: Simplify device removal logic
Use devm_* APIs to enable/disable regulator and to register in IIO infrastructure.

Signed-off-by: Arturas Moskvinas <arturas.moskvinas@gmail.com>
Link: https://lore.kernel.org/r/20240219074139.193464-2-arturas.moskvinas@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:35 +00:00
Sean Rhodes
3b4ebff2a1 iio: accel: kxcjk-1013: Implement ACPI method ROTM to retrieve mount matrix.
Implement kxj_acpi_orientation to retrieve mount matrix
from ACPI ROTM method

Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Link: https://lore.kernel.org/r/19d7a10aae5238a2c8db37da1f74edb86480e17e.1708293140.git.sean@starlabs.systems
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:35 +00:00
Jonathan Cameron
ffe7c46c59 iio: dac: mcp4821: Switch to including mod_devicetable.h for struct of_device_id definition.
of.h was only included for this definition, so include the correct header
instead.

Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240218173323.1023703-9-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:35 +00:00
Jonathan Cameron
1e0bda8cb8 iio: accel: kxsd9: Switch from linux/of.h to linux/mod_devicetable.h
The only of specific definition used is of_device_id table and that
is found in mod_devicetable.h not of.h

Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240218173323.1023703-8-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:35 +00:00
Jonathan Cameron
22f4fae348 iio: accel: bma180: Switch from linux/of.h to linux/mod_devicetable.h
The only of specific definition used is of_device_id table and that
is found in mod_devicetable.h not of.h

Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240218173323.1023703-7-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:35 +00:00
Jonathan Cameron
a13c7393ee iio: accel: adxl372: Switch from linux/of.h to linux/mod_devicetable.h
The only of specific definition used is of_device_id table and that
is found in mod_devicetable.h not of.h

Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240218173323.1023703-6-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:35 +00:00
Jonathan Cameron
8ccc719ab9 iio: adc: ads8688: Switch to mod_devicetable.h for struct of_device_id definition
of.h was only included to get access to this structure, so include the
correct header directly instead.

Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240218173323.1023703-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:35 +00:00
Jonathan Cameron
a5d8684fe5 iio: light: al3010: Switch from linux/of.h to linux/mod_devicetable.h
The only of specific definition used is of_device_id table and that
is found in mod_devicetable.h not of.h

Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240218173323.1023703-4-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:35 +00:00
Jonathan Cameron
c7618c4fce iio: light: al3320a: Drop unused linux/of.h include
Nothing from linux/of.h used in this driver.

Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240218173323.1023703-3-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:35 +00:00
Jonathan Cameron
d0dc99c0ae iio: light: vl6180: Drop unused linux/of.h include
Nothing from linux/of.h is used in this driver.

Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240218173323.1023703-2-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:34 +00:00
Linus Torvalds
5cf7ebef02 spi: Fixes for v6.8
There's two things here - the big one is a batch of fixes for the power
 management in the Cadence QuadSPI driver which had some serious issues
 with runtime PM and there's also a revert of one of the last batch of
 fixes for ppc4xx which has a dependency on -next but was in between two
 mainline fixes so the -next dependency got missed.
 
 The ppc4xx driver is not currently included in any defconfig and has
 dependencies that exclude it from allmodconfigs so none of the CI
 systems catch issues with it, hence the need for the earlier fixes
 series.  There's some updates to the PowerPC configs to address this.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXfcaAACgkQJNaLcl1U
 h9DOagf7BA7H/KvTOLuyd6uU90TwExZslA3/KiHhxn9ePwPHdc9njVMHBMVWl7T2
 K4jMDVz9Y7SN41npLG/B48n1dD1jMyWsX2GxkUHaFGCMyK4Go1ODJHmK8ixWSRfy
 hIFacWgjd6qEJej9SRoKFXmhi9u/UdNJIcUU8xXy3WK3IkrugGySmPUtVXDby+3A
 6u2aR588xDEYrySZtxm8ZDFpl2FKU912OswtPPwCNTmSsMkn25/ePqhdo9C2H/VK
 GA8290rVJFpGSsJPdUVLYAyYIbaar7bBtWV4IfLRBbIN9sFNRKvRbxJpwe6A93dQ
 BOCjj+G/UjKPFYARhuDReF1Hd5+/Bg==
 =YOog
 -----END PGP SIGNATURE-----

Merge tag 'spi-fix-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
 "There's two things here - the big one is a batch of fixes for the
  power management in the Cadence QuadSPI driver which had some serious
  issues with runtime PM and there's also a revert of one of the last
  batch of fixes for ppc4xx which has a dependency on -next but was in
  between two mainline fixes so the -next dependency got missed.

  The ppc4xx driver is not currently included in any defconfig and has
  dependencies that exclude it from allmodconfigs so none of the CI
  systems catch issues with it, hence the need for the earlier fixes
  series. There's some updates to the PowerPC configs to address this"

* tag 'spi-fix-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: Drop mismerged fix
  spi: cadence-qspi: add system-wide suspend and resume callbacks
  spi: cadence-qspi: put runtime in runtime PM hooks names
  spi: cadence-qspi: remove system-wide suspend helper calls from runtime PM hooks
  spi: cadence-qspi: fix pointer reference in runtime PM hooks
2024-02-28 11:16:19 -08:00
Linus Torvalds
628e0594fd regulator: Fixes for v6.8
Two small fixes, one small update for the max5970 driver bringing the
 driver and DT binding documentation into sync plus a missed update to
 the patterns in MAINTAINERS after a DT binding YAML conversion.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXfcg4ACgkQJNaLcl1U
 h9DY6gf/Y3pZz03HuUXf5RVphi9q6cyTb9XlqQbXPWb2tVN/3pVxjCy14aW2IJEN
 bo7fnQyEnbP3pYpDpWDHI0hX4KxV83MoCArpsw7yOTnXrIP+PZBAEbcsWuAeKDqu
 WPKVu1bO/vCpMSaQEzYavtmcyLwIihs21W8FqcQ0bhrYVO4jWefSVGHh+VcKFKSv
 0h2OeAbE9OE58arAZb+rFAeDwKzbo6ldf14/Uj+a+wKENxZ9U5nZevsMf7xoJyjO
 XYJpYMbMj/1LJ9V+WL4zOaqULIlZyRjq5SUMeC5egX4wYX3LMMvCdw6f0i0Rkaye
 bmld819z9ITcLwlvWry5ljDba26YUQ==
 =sGIp
 -----END PGP SIGNATURE-----

Merge tag 'regulator-fix-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "Two small fixes, one small update for the max5970 driver bringing the
  driver and DT binding documentation into sync plus a missed update to
  the patterns in MAINTAINERS after a DT binding YAML conversion"

* tag 'regulator-fix-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: max5970: Fix regulator child node name
  MAINTAINERS: repair entry for MICROCHIP MCP16502 PMIC DRIVER
2024-02-28 11:10:27 -08:00
Arnd Bergmann
456df41549 ARM: bcm: stop selecing CONFIG_TICK_ONESHOT
ARCH_BCM_MOBILE is the only platform that selects CONFIG_TICK_ONESHOT,
the others stopped 12 years ago in commit 98fab064d3 ("ARM: Remove
unnecessary selection of TICK_ONESHOT").

This inconsistency caused a build regression after an otherwise
correct change to the timers subsystem:

kernel/time/tick-sched.c:1599:6: error: redefinition of 'tick_sched_timer_dying'
 1599 | void tick_sched_timer_dying(int cpu)
      |      ^
kernel/time/tick-sched.h:111:20: note: previous definition is here
  111 | static inline void tick_sched_timer_dying(int cpu) { }

Drop this dead select.

Fixes: 3aedb7fcd8 ("tick/sched: Remove useless oneshot ifdeffery")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240228123850.3499024-2-arnd@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-02-28 10:32:25 -08:00
Waiman Long
66f40b926d cgroup/cpuset: Fix a memory leak in update_exclusive_cpumask()
Fix a possible memory leak in update_exclusive_cpumask() by moving the
alloc_cpumasks() down after the validate_change() check which can fail
and still before the temporary cpumasks are needed.

Fixes: e2ffe502ba ("cgroup/cpuset: Add cpuset.cpus.exclusive for v2")
Reported-and-tested-by: Mirsad Todorovac <mirsad.todorovac@alu.hr>
Closes: https://lore.kernel.org/lkml/14915689-27a3-4cd8-80d2-9c30d0c768b6@alu.unizg.hr
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v6.7+
2024-02-28 08:02:55 -10:00
Ryo Takakura
6d1ce806e1 arm64: Update setup_arch() comment on interrupt masking
DAIF_PROCCTX_NOIRQ contains the FIQ bit. Update the comment as only
asynchronous aborts are unmasked and FIQ is still masked.

Signed-off-by: Ryo Takakura <takakura@valinux.co.jp>
Link: https://lore.kernel.org/r/20240228022836.1756-1-takakura@valinux.co.jp
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-02-28 18:01:24 +00:00
Leonardo Bras
1984c80546 arm64: remove unnecessary ifdefs around is_compat_task()
Currently some parts of the codebase will test for CONFIG_COMPAT before
testing is_compat_task().

is_compat_task() is a inlined function only present on CONFIG_COMPAT.
On the other hand, for !CONFIG_COMPAT, we have in linux/compat.h:

 #define is_compat_task() (0)

Since we have this define available in every usage of is_compat_task() for
!CONFIG_COMPAT, it's unnecessary to keep the ifdefs, since the compiler is
smart enough to optimize-out those snippets on CONFIG_COMPAT=n

This requires some regset code as well as a few other defines to be made
available on !CONFIG_COMPAT, so some symbols can get resolved before
getting optimized-out.

Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240109034651.478462-2-leobras@redhat.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-02-28 18:01:23 +00:00
Linus Torvalds
e326df53af This push fixes a regression in lskcipher and an out-of-bound
access in arm64/neonbs.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmXZOpsACgkQxycdCkmx
 i6evnRAAzwTYyTOZFil02WUUqrmjIoiA3qMK2FiXr1wE8vTtlCvfEODGjS8T58JX
 nl5PU6D3/H4OJu7Z0zzjdPUbj2EQ7JSw7T+N54p8Zr4Y/Sy/XeFPWwE5XbfGuPcc
 7TS3UbIpX9Gi08M5R316C4an2/8YYRsYPZUyEkm0SPvh9egDF08o62UwxJsvj7aH
 zKpjMjSSuxJWtzf2H9HDBlPh46u/ZFaV7kNJmrvl9Meb0XovmSCSkDWmHyOOE6TQ
 TNdKyWuueW/QGtuIwFYEKhzyptfpqFN7ZkX8F45b4Mx8uHzcwWTezHe6jr/pFupR
 APcYZfnZWanX5fbYkUmjjTkfiNO/ez9CkMRrhbexUWxafpeojlTAWtPRN3HdT8AX
 /UFVCgYbDjdR8CebONidyvxQn6rYahseQ7epDPDiT/EEjAxCaU+WzOCCg6pb6TpX
 KI3KBNq/cgvDkH3ywcTvoyS/XVRuiN8DqE+/zzLvU3po1EmcC1ZBwyKJva2/STMU
 J0d+g4Xxu5tY8XmO19+5ZGbY6FerbTdchTgwwNamGtnCL3B2JWDC1kUTnA/aKiFW
 2umTzxKSEzQFqgAnyXGOnx584QDAOOjm3CUQvTbLH+K2E4ip5O32U2SlOmYSep3O
 2EMQR1jHonEf2rUYADACk0ES4SCMftmIZV4Y4oHRoVFM+oEcyI0=
 =IOp0
 -----END PGP SIGNATURE-----

Merge tag 'v6.8-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
 "This fixes a regression in lskcipher and an out-of-bound access
  in arm64/neonbs"

* tag 'v6.8-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: arm64/neonbs - fix out-of-bounds access on short input
  crypto: lskcipher - Copy IV in lskcipher glue code always
2024-02-28 09:30:26 -08:00