According to binding doc mmc/fsl,esdhc.yaml and driver
drivers/mmc/host/sdhci-of-esdhc.c, default is big-endian, should
use little-endian for little-endian system. Remove 'big-endian' to fix
below warning:
esdhc@1560000 (fsl,ls1021a-esdhc): Unevaluated properties are not allowed ('big-endian', 'bus-width' were unexpected)
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit 7e0685a0c4 ("arm64: dts: ls1012a: fix DWC3 USB VBUS glitch issue")
erroneously added this to ls1021a as well. Despite that apparently the
workaround has already been applied unconditional at
commit a6ba1e4531 ("usb: dwc3: apply snps,host-vbus-glitches workaround unconditionally")
Remove it to fix CHECK_DTBS warning:
usb@3100000 (snps,dwc3): Unevaluated properties are not allowed ('snps,host-vbus-glitches' was unexpected)
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is a dedicated compatible for ls1021a. Using it also fixes the
warning regarding big-endian:
arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dtb: watchdog@2ad0000 (fsl,imx21-wdt): big-endian: False schema does not allow True
Also remove clock-names which is neither used nor specified.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to binding doc memory-controllers/fsl/fsl,ddr.yaml
and driver drivers/edac/fsl_ddr_edac.c, default is big-endian, should
use little-endian for little-endian system. Remove 'big-endian' to fix
below warning:
arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dtb: memory-controller@1080000 (fsl,qoriq-memory-controller): 'big-endian' does not match any of the regexes: '^pinctrl-[0-9]+$'
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
queue-group nodes don't need them anyway as they are inherited from
the corresponding ethernet nodes. Fixes the dtbs_check warning:
ethernet@2d10000 (fsl,etsec2): queue-group@2d10000: '#address-cells', '#size-cells' do not match any of the regexes: '^pinctrl-[0-9]+$'
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add missing reg property to enet nodes. This fixes the dtbs_check warning:
Warning (unit_address_vs_reg): /soc/ethernet@2d10000: node has a unit name, but no reg or ranges property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
RTC nodes are supposed to be named rtc@. Also remove reg-names which is
neither used nor specified.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to bindings Rx DMA channel comes first if Rx & Tx is used.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
0x8390000 is reserved memory, but 0x8380000 is the QSPI base address
in RM. But register have offset of 0x8000, so first 'reg' entry address
is used for node unit address.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Although the GIC base address stated in RM is 0x1400000, the first address
being used is 0x1401000. This is similar to imx6ul.dtsi where the
GIC base address in the RM is 0xa00000 but 0xa01000 being used in DTS.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The assignment of the USB ports is wrong and needs to be swapped.
The OTG (USB-C) port is on the first port and the host port with
the onboard hub is on the second port.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Fixes: 2b52fd6035 ("arm64: dts: Add support for Kontron i.MX93 OSM-S SoM and BL carrier board")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The RTC INT ouptut is connected to a GPIO. Add the interrupt
so it can be used by the RTC driver.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The latest hardware revision uses GPIO_B_2 as reset for
the USB hub. Fix this and remove the pinctrl as we already
have this in the OSM-S devicetree.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Hardware rev 3 changed a few signals. Reflect these changes in
the GPIO labels.
* digital IOs were moved to GPIO expander
* remove labels for unused signals
* add labels for TFT, CSI and USB hub IOs
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some new panels have the Sitronix touch instead of Goodix. Support them
by adding a node for the new controller. The bootloader needs to detect
the correct controller and enable/disable the nodes accordingly. To make
this easier add labels for both nodes.
Signed-off-by: Oualid Derouiche <oualid.derouiche@kontron.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
For this IP the correct control of the CTS signal for transceiver direction
switching is difficult and - maybe also buggy - in the driver. Especially
the bootup requires special handling for most hardware implementations.
Therefore we simply use a GPIO now, which is fully under software control
and which is not problematic on bootup.
Signed-off-by: Eberhard Stoll <eberhard.stoll@kontron.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This regulator is not used anywhere and is not available in hardware.
Remove it.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is an addon for the BL i.MX8MM that features an LTE
modem, a TPM module, some LEDs and a pushbutton.
Signed-off-by: Annette Kobou <annette.kobou@kontron.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The wm8524 codec is connected to the SAI interface. There are two audio
plls on i.MX8MN, one pll can be the clock source of 44kHz series rates,
another pll can be clock source of 48kHz series rates.
Previously it only supported 48kHz series rates, with this change the
supported rates will include 44kHz series rates, from 8kHz to 192kHz.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The wm8524 codec is connected to the SAI interface. There are two audio
plls on i.MX8MQ, one pll can be the clock source of 44kHz series rates,
another pll can be clock source of 48kHz series rates.
Previously it only supported 48kHz series rates, with this change the
supported rates will include 44kHz series rates, from 8kHz to 192kHz.
As commit 17cc308b18 ("ASoC: wm8524: enable constraints when sysclk is
configured.") make wm8524 release the constraint when codec's sysclk is
not configured, so configure the cpu dai's sysclk to support more rates
with the 'clocks' property removed.
Add mclk-fs property for the sysclk ratio, which is required by
calculating the sysclk, 256 is a common ratio for audio.
'system-clock-direction-out' is a required property after
commit 5725bce709 ("ASoC: simple-card-utils: Unify clock direction by
clk_direction") to specify the clock direction.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The wm8524 codec is connected to the SAI interface. There are two audio
plls on i.MX8MM, one pll can be the clock source of 44kHz series rates,
another pll can be clock source of 48kHz series rates.
Previously it only supported 48kHz series rates, with this change the
supported rates will include 44kHz series rates, from 8kHz to 192kHz.
As commit 17cc308b18 ("ASoC: wm8524: enable constraints when sysclk is
configured.") make wm8524 release the constraint when codec's sysclk is
not configured, so configure the cpu dai's sysclk to support more rates
with the 'clocks' property removed.
Add mclk-fs property for the sysclk ratio, which is required by
calculating the sysclk, 256 is a common ratio for audio.
'system-clock-direction-out' is a required property after
commit 5725bce709 ("ASoC: simple-card-utils: Unify clock direction by
clk_direction") to specify the clock direction.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Convert lpc32xx-key.txt to yaml format.
Additional changes:
- set maximum of key-row(column) to 4.
- add ref to matrix-keymap.yaml.
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250818183814.3603308-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When removing a macb device, the driver calls phy_exit() before
unregister_netdev(). This leads to a WARN from kernfs:
------------[ cut here ]------------
kernfs: can not remove 'attached_dev', no directory
WARNING: CPU: 1 PID: 27146 at fs/kernfs/dir.c:1683
Call trace:
kernfs_remove_by_name_ns+0xd8/0xf0
sysfs_remove_link+0x24/0x58
phy_detach+0x5c/0x168
phy_disconnect+0x4c/0x70
phylink_disconnect_phy+0x6c/0xc0 [phylink]
macb_close+0x6c/0x170 [macb]
...
macb_remove+0x60/0x168 [macb]
platform_remove+0x5c/0x80
...
The warning happens because the PHY is being exited while the netdev
is still registered. The correct order is to unregister the netdev
before shutting down the PHY and cleaning up the MDIO bus.
Fix this by moving unregister_netdev() ahead of phy_exit() in
macb_remove().
Fixes: 8b73fa3ae0 ("net: macb: Added ZynqMP-specific initialization")
Signed-off-by: luoguangfei <15388634752@163.com>
Link: https://patch.msgid.link/20250818232527.1316-1-15388634752@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The NIX block receives traffic from multiple channels, including:
MAC block (RPM)
Loopback module (LBK)
CPT block
RPM
|
-----------------
LBK --| NIX |
-----------------
|
CPT
Due to a hardware errata, CN10k and earlier Octeon silicon series,
the hardware may incorrectly assert XOFF on certain channels during
reset. As a workaround, a write operation to the NIX_AF_RX_CHANX_CFG
register can be performed to broadcast XON signals on the affected
channels
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250820064625.1464361-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The module-level debug parameter was added in v2.6.26 by a commit
ad3c0fe8b8 ("firewire: debug interrupt events"). Its functionality
has long been superseded by tracepoints.
This commit removes the module parameter, bye.
Link: https://lore.kernel.org/r/20250821003017.186752-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Between v6.11 and v6.12, a set of tracepoints was added to record
asynchronous communication events:
- firewire:async_phy_inbound
- firewire:async_phy_outbound_initiate
- firewire:async_phy_outbound_complete
- firewire:async_response_inbound
- firewire:async_response_outbound_initiate
- firewire:async_response_outbound_complete
- firewire:async_request_inbound
- firewire:async_request_outbound_initiate
- firewire:async_request_outbound_complete
These tracepoints cover the functionality of the existing debug logging.
This commit removes the logging.
Link: https://lore.kernel.org/r/20250821003017.186752-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
A commit 677ceae190 ("firewire: core: add tracepoints event for
self_id_sequence") added the "firewire:self_id_sequence" event in v6.11.
A commit 526e21a2aa ("firewire: ohci: add tracepoints event for data
of Self-ID DMA") added the "firewire_ohci:self_id_complete" event in
v6.12.
These tracepoints replace the equivalent debug logging. This commit
removes the logging.
Link: https://lore.kernel.org/r/20250821003017.186752-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
A commit 0d8914165d ("firewire: ohci: add tracepoints event for hardIRQ
event") added "firewire_ohci:irqs" event in v6.11, which can provide
equivalent information to the existing debug logging.
This commit removes the logging.
Link: https://lore.kernel.org/r/20250821003017.186752-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Will Deacon says:
====================
Fix vsock error-handling regression introduced in v6.17-rc1
Here are a couple of patches fixing the vsock error-handling regression
found by syzbot that I introduced during the recent merge window.
====================
Link: https://patch.msgid.link/20250818180355.29275-1-will@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 6693731487 ("vsock/virtio: Allocate nonlinear SKBs for handling
large transmit buffers") converted the virtio vsock transmit path to
utilise nonlinear SKBs when handling large buffers. As part of this
change, virtio_transport_fill_skb() was updated to call
skb_copy_datagram_from_iter() instead of memcpy_from_msg() as the latter
expects a single destination buffer and cannot handle nonlinear SKBs
correctly.
Unfortunately, during this conversion, I overlooked the error case when
the copying function returns -EFAULT due to a fault on the input buffer
in userspace. In this case, memcpy_from_msg() reverts the iterator to
its initial state thanks to copy_from_iter_full() whereas
skb_copy_datagram_from_iter() leaves the iterator partially advanced.
This results in a WARN_ONCE() from the vsock code, which expects the
iterator to stay in sync with the number of bytes transmitted so that
virtio_transport_send_pkt_info() can return -EFAULT when it is called
again:
------------[ cut here ]------------
'send_pkt()' returns 0, but 65536 expected
WARNING: CPU: 0 PID: 5503 at net/vmw_vsock/virtio_transport_common.c:428 virtio_transport_send_pkt_info+0xd11/0xf00 net/vmw_vsock/virtio_transport_common.c:426
Modules linked in:
CPU: 0 UID: 0 PID: 5503 Comm: syz.0.17 Not tainted 6.16.0-syzkaller-12063-g37816488247d #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call virtio_transport_fill_skb_full() to restore the previous iterator
behaviour.
Cc: Jason Wang <jasowang@redhat.com>
Cc: Stefano Garzarella <sgarzare@redhat.com>
Fixes: 6693731487 ("vsock/virtio: Allocate nonlinear SKBs for handling large transmit buffers")
Reported-by: syzbot+b4d960daf7a3c7c2b7b1@syzkaller.appspotmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://patch.msgid.link/20250818180355.29275-3-will@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Types that implement both `AsBytes` and `FromBytes` can be safely
modified as a slice of bytes. Add a `as_bytes_mut` method for that
purpose.
[acourbot@nvidia.com: use fully qualified `core::mem::size_of_val` to
build with Rust 1.78.]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250801-as_bytes-v5-2-975f87d5dc85@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Every type that implements `AsBytes` should be able to provide its byte
representation. Introduce the `as_bytes` method that returns the
implementer as a stream of bytes, and provide a default implementation
that should be suitable for any type that satisfies `AsBytes`'s safety
requirements.
[acourbot@nvidia.com: use fully qualified `core::mem::size_of_val` to
build with Rust 1.78.]
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250801-as_bytes-v5-1-975f87d5dc85@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
In a similar manner to copy_from_iter()/copy_from_iter_full(), introduce
skb_copy_datagram_from_iter_full() which reverts the iterator to its
initial state when returning an error.
A subsequent fix for a vsock regression will make use of this new
function.
Cc: Christian Brauner <brauner@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://patch.msgid.link/20250818180355.29275-2-will@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Falcon DMA transfers are done in 256 bytes increments, and the method
responsible for initiating the transfer checked that the required length
was indeed a multiple of 256. While correct, this also requires callers
to specifically account for this limitation of DMA transfers, and we had
for instance the fwsec code performing a seemingly arbitrary (and
potentially overflowing) upwards alignment of the DMEM load size to
match this requirement.
Let's move that alignment into the loading code itself instead: since it
is working in terms of number of transfers, we can turn this upwards
alignment into a non-overflowing operation, and check that the requested
transfer remains into the limits of the DMA object. This also allows us
to remove a DMA-specific constant in the fwsec code.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250821-falcondma_256b-v2-1-83e8647a24b5@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Declare PP_FLAG_ALLOW_UNREADABLE_NETMEM to turn on unreadable netmem
support in GVE.
We also drop any net_iov packets where header split is not enabled.
We're unable to process packets where the header landed in unreadable
netmem.
Use page_pool_dma_sync_netmem_for_cpu in lieu of
dma_sync_single_range_for_cpu to correctly handle unreadable netmem
that should not be dma-sync'd.
Disable rx_copybreak optimization if payload is unreadable netmem as
that needs access to the payload.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250818210507.3781705-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=HOA8
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-08-20' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter: updates for net-next
First patch gets rid of refcounting for dying list dumping,
use a cookie value instead of keeping the object around.
Remaining patches extend nftables pipapo (concatenated ranges) set type.
Make the AVX2 optimized version available from the control plane as
well, then use it during insert. This gives a nice speedup for large
sets. All from myself.
On PREEMPT_RT, we can't rely on local_bh_disable to protect the
access to the percpu scratch maps. Use nested-BH locking for this,
From Sebastian Siewior.
* tag 'nf-next-25-08-20' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nft_set_pipapo: Use nested-BH locking for nft_pipapo_scratch
netfilter: nft_set_pipapo: Store real pointer, adjust later.
netfilter: nft_set_pipapo: use avx2 algorithm for insertions too
netfilter: nft_set_pipapo_avx2: split lookup function in two parts
netfilter: nft_set_pipapo_avx2: Drop the comment regarding protection
netfilter: ctnetlink: remove refcounting in dying list dumping
====================
Link: https://patch.msgid.link/20250820144738.24250-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ARM64_FEATURE_MASK() macro was a hack introduce whilst the
automatic generation of sysreg encoding was introduced, and was
too unreliable to be entirely trusted.
We are in a better place now, and we could really do without this
macro. Get rid of it altogether.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250817202158.395078-7-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Allow userspace to write to RAS_frac, under the condition that
the host supports RASv1p1 with RAS_frac==1. Other configurations
will result in RAS_frac being exposed as 0, and therefore implicitly
not writable.
To avoid the clutter, the ID_AA64PFR1_EL1 sanitisation is moved to
its own function.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20250817202158.395078-6-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Make ID_AA64PFR0_EL1.RAS writable so that we can restore a VM from
a system without RAS to a RAS-equipped machine (or disable RAS
in the guest).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20250817202158.395078-5-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
An EL2 guest can set HCR_EL2.FIEN, which gives access to the RASv1p1
fault injection mechanism. This would allow an EL1 guest to inject
error records into the system, which does sound like a terrible idea.
Prevent this situation by added FIEN to the list of bits we silently
exclude from being inserted into the host configuration.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20250817202158.395078-4-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
FEAT_RASv1p1 system registeres are not handled at all so far.
KVM will give an embarassed warning on the console and inject
an UNDEF, despite RASv1p1 being exposed to the guest on suitable HW.
Handle these registers similarly to FEAT_RAS, with the added fun
that there are *two* way to indicate the presence of FEAT_RASv1p1.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20250817202158.395078-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Detecting FEAT_RASv1p1 is rather complicated, as there are two
ways for the architecture to advertise the same thing (always a
delight...).
Add a capability that will advertise this in a synthetic way to
the rest of the kernel.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20250817202158.395078-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When a large VM, specifically one that holds a significant number of PTEs,
gets abruptly destroyed, the following warning is seen during the
page-table walk:
sched: CPU 0 need_resched set for > 100018840 ns (100 ticks) without schedule
CPU: 0 UID: 0 PID: 9617 Comm: kvm_page_table_ Tainted: G O 6.16.0-smp-DEV #3 NONE
Tainted: [O]=OOT_MODULE
Call trace:
show_stack+0x20/0x38 (C)
dump_stack_lvl+0x3c/0xb8
dump_stack+0x18/0x30
resched_latency_warn+0x7c/0x88
sched_tick+0x1c4/0x268
update_process_times+0xa8/0xd8
tick_nohz_handler+0xc8/0x168
__hrtimer_run_queues+0x11c/0x338
hrtimer_interrupt+0x104/0x308
arch_timer_handler_phys+0x40/0x58
handle_percpu_devid_irq+0x8c/0x1b0
generic_handle_domain_irq+0x48/0x78
gic_handle_irq+0x1b8/0x408
call_on_irq_stack+0x24/0x30
do_interrupt_handler+0x54/0x78
el1_interrupt+0x44/0x88
el1h_64_irq_handler+0x18/0x28
el1h_64_irq+0x84/0x88
stage2_free_walker+0x30/0xa0 (P)
__kvm_pgtable_walk+0x11c/0x258
__kvm_pgtable_walk+0x180/0x258
__kvm_pgtable_walk+0x180/0x258
__kvm_pgtable_walk+0x180/0x258
kvm_pgtable_walk+0xc4/0x140
kvm_pgtable_stage2_destroy+0x5c/0xf0
kvm_free_stage2_pgd+0x6c/0xe8
kvm_uninit_stage2_mmu+0x24/0x48
kvm_arch_flush_shadow_all+0x80/0xa0
kvm_mmu_notifier_release+0x38/0x78
__mmu_notifier_release+0x15c/0x250
exit_mmap+0x68/0x400
__mmput+0x38/0x1c8
mmput+0x30/0x68
exit_mm+0xd4/0x198
do_exit+0x1a4/0xb00
do_group_exit+0x8c/0x120
get_signal+0x6d4/0x778
do_signal+0x90/0x718
do_notify_resume+0x70/0x170
el0_svc+0x74/0xd8
el0t_64_sync_handler+0x60/0xc8
el0t_64_sync+0x1b0/0x1b8
The warning is seen majorly on the host kernels that are configured
not to force-preempt, such as CONFIG_PREEMPT_NONE=y. To avoid this,
instead of walking the entire page-table in one go, split it into
smaller ranges, by checking for cond_resched() between each range.
Since the path is executed during VM destruction, after the
page-table structure is unlinked from the KVM MMU, relying on
cond_resched_rwlock_write() isn't necessary.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250820162242.2624752-3-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Split kvm_pgtable_stage2_destroy() into two:
- kvm_pgtable_stage2_destroy_range(), that performs the
page-table walk and free the entries over a range of addresses.
- kvm_pgtable_stage2_destroy_pgd(), that frees the PGD.
This refactoring enables subsequent patches to free large page-tables
in chunks, calling cond_resched() between each chunk, to yield the
CPU as necessary.
Existing callers of kvm_pgtable_stage2_destroy(), that probably cannot
take advantage of this (such as nVMHE), will continue to function as is.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250820162242.2624752-2-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
